When ACP is not powered on by default, acp power on sequence explicitly
invoked by programming pgfsm control mask. The existing implementation
checks the same PGFSM status mask and programs the same PGFSM control mask
in all ACP variants which breaks acp power on sequence for ACP6.0 and
ACP6.3 variants. So to fix this issue, update ACP pgfsm control mask and
status mask based on acp descriptor rev field, which will vary based on
acp variant.
Fixes: 846aef1d7c ("ASoC: SOF: amd: Add Renoir ACP HW support")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240816070328.610360-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Addition of 'dsp_intr_base' to ACP error register offsets points to
wrong register offsets in irq handler. Correct the acp error register
offsets. ACP error status register offset and acp error reason register
offset got changed from ACP6.0 onwards. Add 'acp_error_stat' and
'acp_sw0_i2s_err_reason' as descriptor fields in sof_amd_acp_desc
structure and update the values based on the ACP variant.
>From Rembrandt platform onwards, errors related to SW1 Soundwire manager
instance/I2S controller connected on P1 power tile is reported with
ACP_SW1_I2S_ERROR_REASON register. Add conditional check for the same.
Fixes: 96eb818510 ("ASoC: SOF: amd: add interrupt handling for SoundWire manager devices")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240813105944.3126903-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code modifies IRAM and DRAM size after sha dma start for
vangogh platform. The problem with this sequence is that it might cause
sha dma failure when firmware code binary size is greater than the default
IRAM size. To fix this issue, Move the iram-dram fence register sequence
prior to sha dma start.
Fixes: 094d11768f ("ASoC: SOF: amd: Skip IRAM/DRAM size modification for Steam Deck OLED")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240813105944.3126903-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull sound fixes from Takashi Iwai:
"A collection of fixes gathered since the previous pull.
We see a bit large LOCs at a HD-audio quirk, but that's only bulk COEF
data, hence it's safe to take. In addition to that, there were two
minor fixes for MIDI 2.0 handling for ALSA core, and the rest are all
rather random small and device-specific fixes"
* tag 'sound-fix-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: fsl-asoc-card: Dynamically allocate memory for snd_soc_dai_link_components
ASoC: amd: yc: Support mic on Lenovo Thinkpad E16 Gen 2
ALSA: hda/realtek: Implement sound init sequence for Samsung Galaxy Book3 Pro 360
ALSA: hda/realtek: cs35l41: Fixup remaining asus strix models
ASoC: SOF: ipc4-topology: Preserve the DMA Link ID for ChainDMA on unprepare
ASoC: SOF: ipc4-topology: Only handle dai_config with HW_PARAMS for ChainDMA
ALSA: ump: Force 1 Group for MIDI1 FBs
ALSA: ump: Don't update FB name for static blocks
ALSA: usb-audio: Add a quirk for Sonix HD USB Camera
ASoC: TAS2781: Fix tasdev_load_calibrated_data()
ASoC: tegra: select CONFIG_SND_SIMPLE_CARD_UTILS
ASoC: Intel: use soc_intel_is_byt_cr() only when IOSF_MBI is reachable
ALSA: usb-audio: Move HD Webcam quirk to the right place
ALSA: hda: tas2781: mark const variables as __maybe_unused
ALSA: usb-audio: Fix microphone sound on HD webcam.
ASoC: sof: amd: fix for firmware reload failure in Vangogh platform
ASoC: Intel: Fix RT5650 SSP lookup
ASOC: SOF: Intel: hda-loader: only wait for HDaudio IOC for IPC4 devices
ASoC: SOF: imx8m: Fix DSP control regmap retrieval
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
Commit 8efcd48646 ("ASoC: Intel: sof_rt5682: use common module for
sof_card_private initialization") migrated the pin assignment in the
context struct up to soc-acpi-intel-ssp-common.c. This uses a lookup
table to see if a device has a amp/codec before assigning the pin. The
issue here arises when combination parts that serve both (with 2 ports)
are used.
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.3/adl_rt5682_def/SSP0-Codec'
CPU: 1 PID: 2079 Comm: udevd Tainted: G U 6.6.36-03391-g744739e00023 #1 3be1a2880a0970f65545a957db7d08ef4b3e2c0d
Hardware name: Google Anraggar/Anraggar, BIOS Google_Anraggar.15217.552.0 05/07/2024
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
sysfs_warn_dup+0x5b/0x70
sysfs_create_dir_ns+0xb0/0x100
kobject_add_internal+0x133/0x3c0
kobject_add+0x66/0xb0
? device_add+0x65/0x780
device_add+0x164/0x780
snd_soc_add_pcm_runtimes+0x2fa/0x800
snd_soc_bind_card+0x35e/0xc20
devm_snd_soc_register_card+0x48/0x90
platform_probe+0x7b/0xb0
really_probe+0xf7/0x2a0
...
kobject: kobject_add_internal failed for SSP0-Codec with -EEXIST, don't try to register things with the same name in the same directory.
The issue is that the ALC5650 was only defined in the codec table and
not the amp table which left the pin unassigned but the dai link was
still created by the machine driver.
Also patch the suffix filename code for the topology to prevent double
suffix names as a result of this change.
Fixes: 8efcd48646 ("ASoC: Intel: sof_rt5682: use common module for sof_card_private initialization")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240716084012.299257-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
fsl,dsp-ctrl is a phandle to syscon block so we need to use correct
function to retrieve it.
Currently there is no SOF DSP DTS merged into mainline so there is no
need to support the old way of retrieving the dsp control node.
Fixes: 9ba23717b2 ("ASoC: SOF: imx8m: Implement DSP start")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20240715151653.114751-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is incorrect to request the input pin format of the destination widget
using the output pin index of the source module as the indexes are not
necessarily matching.
moduleA.out_pin1 can be connected to moduleB.in_pin0 for example.
Use the dst_queue_id to request the input format of the destination module.
This bug remained unnoticed likely because in nocodec topologies we don't
have process modules after a module copier, thus the pin/queue index is
ignored.
For the process module case, the code was likely have been tested in a
controlled way where all the pin/queue/format properties were present to
work.
Update the debug prints to have better information.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: stable@vger.kernel.org # v6.8+
Link: https://patch.msgid.link/20240624121519.91703-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct mtk_adsp_ipc_ops' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
In order to do it, "struct mtk_adsp_ipc" also needs to be adjusted to this
new const qualifier.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
15533 2383 0 17916 45fc sound/soc/sof/mediatek/mt8195/mt8195.o
After:
=====
text data bss dec hex filename
15557 2367 0 17924 4604 sound/soc/sof/mediatek/mt8195/mt8195.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/a45d6b2b5ec040ea0fc78fca662c2dca3f13a49f.1718312321.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The existing logic to pick a DMIC blob is based on several historical
assumptions that the NHLT in BIOS always contains 32-bits per sample
type (first patch, [1]).
The other issue with the existing logic is that it was designed to care only
about the bit depth of the format and fails to find the existing and correct
blob when rate/channels are different on the FE side compared to what we should
be using on the DAI side (we have components in path which can change
rate/channel count).
These issues have not been observed in past but with new MTL based (Windows)
laptops and new topologies to enhance the audio quality, we started to see weird
issues around how our assumptions of vendors failed.
Since some NHLT blob handling cleanup has been done for 6.10, this series will
complete that work to cover even cases that we don't anticipate to see.
[1] https://github.com/thesofproject/linux/issues/4973
Currently we only check the bit depth value among to DAI formats, but other
parameters might be constant, like number of channels and/or rate.
In capture we use the fe params as a reference to find the format and blob
which should be used, but in the path we can have components which can
handle expanding/narrowing number of channels or do a resample.
In these cases the topology is expected to have 'fixed' parameter for
channels/rates/bit depth and the conversion to the fe format is going to
be done within the path.
In practice this patch fixes issues like:
All DMIC formats are fixed four channels
We have a component which converts the four channel to stereo
FE is opened with 2 channel
Even if we have the correct bit depth format and blob (for four channel) we
will still be looking for stereo configurations, which will fail.
Note: the adjustment of params have switched order with the checking of
single bit depth (needed for the NHLT blob fallback support). This change
is non function, just that if the sof_ipc4_narrow_params_to_format() would
fail, there is no point of checking the single bit depth.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
'make W=1' now reports missing MODULE_DESCRIPTION lines. This patchset
cleans-up all the module definitions and adds MODULE_DESCRIPTION lines
as needed.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
More simplifications from Brent Lu for Chromebooks, Bard Liao for
SoundWire, and support for new Dell SKUs w/ Cirrus Logic codecs added
by Charles Keepax.
Pull soundwire updates from Vinod Koul:
- cleanup and conversion for soundwire sysfs groups
- intel support for ace2x bits, auxdevice pm improvements
- qcom multi link device support
* tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (33 commits)
soundwire: intel_ace2.x: add support for DOAISE property
soundwire: intel_ace2.x: add support for DODSE property
soundwire: intel_ace2x: use DOAIS and DODS settings from firmware
soundwire: intel_ace2x: cleanup DOAIS/DODS settings
soundwire: intel_ace2x: simplify check_wake()
soundwire: intel_ace2x: fix wakeup handling
soundwire: intel_init: resume all devices on exit.
soundwire: intel: export intel_resume_child_device
soundwire: intel_auxdevice: use pm_runtime_resume() instead of pm_request_resume()
ASoC: SOF: Intel: hda: disable SoundWire interrupt later
soundwire: qcom: allow multi-link on newer devices
soundwire: intel_ace2x: use legacy formula for intel_alh_id
soundwire: reconcile dp0_prop and dpn_prop
soundwire: intel_ace2x: set the clock source
soundwire: intel_ace2.x: power-up first before setting SYNCPRD
soundwire: intel_ace2x: move and extend clock selection
soundwire: intel: add support for MeteorLake additional clocks
soundwire: intel: add more values for SYNCPRD
soundwire: bus: extend base clock checks to 96 MHz
soundwire: cadence: show the bus frequency and frame shape
...
ASoC: Updates for v6.10
This is a very big update, in large part due to extensive work the Intel
people have been doing in their drivers though it's also been busy
elsewhere. There's also a big overhaul of the DAPM documentation from
Luca Ceresoli arising from the work he did putting together his recent
ELC talk, and he also contributed a new tool for visualising the DAPM
state.
- A new tool dapm-graph for visualising the DAPM state.
- Substantial fixes and clarifications for the DAPM documentation.
- Very large updates throughout the Intel audio drivers.
- Cleanups of accessors for driver data, module labelling, and for
constification.
- Modernsation and cleanup work in the Mediatek drivers.
- Several fixes and features for the DaVinci I2S driver.
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240.
