VLAs are not supported by either the BPF port of clang nor GCC. The
selftest test_xdp_dynptr.c contains the following code:
const size_t tcphdr_sz = sizeof(struct tcphdr);
const size_t udphdr_sz = sizeof(struct udphdr);
const size_t ethhdr_sz = sizeof(struct ethhdr);
const size_t iphdr_sz = sizeof(struct iphdr);
const size_t ipv6hdr_sz = sizeof(struct ipv6hdr);
[...]
static __always_inline int handle_ipv4(struct xdp_md *xdp, struct bpf_dynptr *xdp_ptr)
{
__u8 eth_buffer[ethhdr_sz + iphdr_sz + ethhdr_sz];
__u8 iph_buffer_tcp[iphdr_sz + tcphdr_sz];
__u8 iph_buffer_udp[iphdr_sz + udphdr_sz];
[...]
}
The eth_buffer, iph_buffer_tcp and other automatics are fixed size
only if the compiler optimizes away the constant global variables.
clang does this, but GCC does not, turning these automatics into
variable length arrays.
This patch removes the global variables and turns these values into
preprocessor constants. This makes the selftest to build properly
with GCC.
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Cc: Yonghong Song <yhs@meta.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: david.faust@oracle.com
Cc: cupertino.miranda@oracle.com
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240123201729.16173-1-jose.marchesi@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds a sample selftest to demonstrate how we can use
bpf_sk_assign_tcp_reqsk() as the backend of SYN Proxy.
The test creates IPv4/IPv6 x TCP connections and transfer messages
over them on lo with BPF tc prog attached.
The tc prog will process SYN and returns SYN+ACK with the following
ISN and TS. In a real use case, this part will be done by other
hosts.
MSB LSB
ISN: | 31 ... 8 | 7 6 | 5 | 4 | 3 2 1 0 |
| Hash_1 | MSS | ECN | SACK | WScale |
TS: | 31 ... 8 | 7 ... 0 |
| Random | Hash_2 |
WScale in SYN is reused in SYN+ACK.
The client returns ACK, and tc prog will recalculate ISN and TS
from ACK and validate SYN Cookie.
If it's valid, the prog calls kfunc to allocate a reqsk for skb and
configure the reqsk based on the argument created from SYN Cookie.
Later, the reqsk will be processed in cookie_v[46]_check() to create
a connection.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240115205514.68364-7-kuniyu@amazon.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With patch set [1], precision backtracing supports register spill/fill
to/from the stack. The patch [2] allows initial imprecise register spill
with content 0. This is a common case for cpuv3 and lower for
initializing the stack variables with pattern
r1 = 0
*(u64 *)(r10 - 8) = r1
and the [2] has demonstrated good verification improvement.
For cpuv4, the initialization could be
*(u64 *)(r10 - 8) = 0
The current verifier marks the r10-8 contents with STACK_ZERO.
Similar to [2], let us permit the above insn to behave like
imprecise register spill which can reduce number of verified states.
The change is in function check_stack_write_fixed_off().
Before this patch, spilled zero will be marked as STACK_ZERO
which can provide precise values. In check_stack_write_var_off(),
STACK_ZERO will be maintained if writing a const zero
so later it can provide precise values if needed.
The above handling of '*(u64 *)(r10 - 8) = 0' as a spill
will have issues in check_stack_write_var_off() as the spill
will be converted to STACK_MISC and the precise value 0
is lost. To fix this issue, if the spill slots with const
zero and the BPF_ST write also with const zero, the spill slots
are preserved, which can later provide precise values
if needed. Without the change in check_stack_write_var_off(),
the test_verifier subtest 'BPF_ST_MEM stack imm zero, variable offset'
will fail.
I checked cpuv3 and cpuv4 with and without this patch with veristat.
There is no state change for cpuv3 since '*(u64 *)(r10 - 8) = 0'
is only generated with cpuv4.
For cpuv4:
$ ../veristat -C old.cpuv4.csv new.cpuv4.csv -e file,prog,insns,states -f 'insns_diff!=0'
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
------------------------------------------ ------------------- --------- --------- --------------- ---------- ---------- -------------
local_storage_bench.bpf.linked3.o get_local 228 168 -60 (-26.32%) 17 14 -3 (-17.65%)
pyperf600_bpf_loop.bpf.linked3.o on_event 6066 4889 -1177 (-19.40%) 403 321 -82 (-20.35%)
test_cls_redirect.bpf.linked3.o cls_redirect 35483 35387 -96 (-0.27%) 2179 2177 -2 (-0.09%)
test_l4lb_noinline.bpf.linked3.o balancer_ingress 4494 4522 +28 (+0.62%) 217 219 +2 (+0.92%)
test_l4lb_noinline_dynptr.bpf.linked3.o balancer_ingress 1432 1455 +23 (+1.61%) 92 94 +2 (+2.17%)
test_xdp_noinline.bpf.linked3.o balancer_ingress_v6 3462 3458 -4 (-0.12%) 216 216 +0 (+0.00%)
verifier_iterating_callbacks.bpf.linked3.o widening 52 41 -11 (-21.15%) 4 3 -1 (-25.00%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 12412 11719 -693 (-5.58%) 345 330 -15 (-4.35%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 12478 11794 -684 (-5.48%) 346 331 -15 (-4.34%)
test_l4lb_noinline and test_l4lb_noinline_dynptr has minor regression, but
pyperf600_bpf_loop and local_storage_bench gets pretty good improvement.
[1] https://lore.kernel.org/all/20231205184248.1502704-1-andrii@kernel.org/
[2] https://lore.kernel.org/all/20231205184248.1502704-9-andrii@kernel.org/
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240110051348.2737007-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, when a scalar bounded register is spilled to the stack, its
ID is preserved, but only if was already assigned, i.e. if this register
was MOVed before.
Assign an ID on spill if none is set, so that equal scalars could be
tracked if a register is spilled to the stack and filled into another
register.
One test is adjusted to reflect the change in register IDs.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-9-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The u64_offset_to_skb_data test is supposed to make a 64-bit fill, but
instead makes a 16-bit one. Fix the test according to its intention and
update the comments accordingly (umax is no longer 0xffff). The 16-bit
fill is covered by u16_offset_to_skb_data.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-2-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
reviews.llvm.org was LLVM's Phabricator instances for code review. It
has been abandoned in favor of GitHub pull requests. While the majority
of links in the kernel sources still work because of the work Fangrui
has done turning the dynamic Phabricator instance into a static archive,
there are some issues with that work, so preemptively convert all the
links in the kernel sources to point to the commit on GitHub.
Most of the commits have the corresponding differential review link in
the commit message itself so there should not be any loss of fidelity in
the relevant information.
Additionally, fix a typo in the xdpwall.c print ("LLMV" -> "LLVM") while
in the area.
Link: https://discourse.llvm.org/t/update-on-github-pull-requests/71540/172
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240111-bpf-update-llvm-phabricator-links-v2-1-9a7ae976bd64@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Various tests specify extra testing prog_flags when loading BPF
programs, like BPF_F_TEST_RND_HI32, and more recently also
BPF_F_TEST_REG_INVARIANTS. While BPF_F_TEST_RND_HI32 is old enough to
not cause much problem on older kernels, BPF_F_TEST_REG_INVARIANTS is
very fresh and unconditionally specifying it causes selftests to fail on
even slightly outdated kernels.
This breaks libbpf CI test against 4.9 and 5.15 kernels, it can break
some local development (done outside of VM), etc.
To prevent this, and guard against similar problems in the future, do
runtime detection of supported "testing flags", and only provide those
that host kernel recognizes.
Acked-by: Song Liu <song@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240109231738.575844-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Seeing:
process_subtest:PASS:Can't alloc specs array 0 nsec
... in verbose successful test log is very confusing. Use smaller
identifier-like test tag to denote that we are asserting specs array
allocation success.
Now it's much less distracting:
process_subtest:PASS:specs_alloc 0 nsec
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240105000909.2818934-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test uses bpf_prog_get_info_by_fd() to obtain the xlated
instructions of the program first. Since these instructions have
already been rewritten by the verifier, the tests then checks whether
the rewritten instructions are as expected. And to ensure LLVM generates
code exactly as expected, use inline assembly and a naked function.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240105104819.3916743-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jakub reported that ASSERT_EQ(cpu, i) in so_incoming_cpu.c seems to
fire somewhat randomly.
# # RUN so_incoming_cpu.before_reuseport.test3 ...
# # so_incoming_cpu.c:191:test3:Expected cpu (32) == i (0)
# # test3: Test terminated by assertion
# # FAIL so_incoming_cpu.before_reuseport.test3
# not ok 3 so_incoming_cpu.before_reuseport.test3
When the test failed, not-yet-accepted CLOSE_WAIT sockets received
SYN with a "challenging" SEQ number, which was sent from an unexpected
CPU that did not create the receiver.
The test basically does:
1. for each cpu:
1-1. create a server
1-2. set SO_INCOMING_CPU
2. for each cpu:
2-1. set cpu affinity
2-2. create some clients
2-3. let clients connect() to the server on the same cpu
2-4. close() clients
3. for each server:
3-1. accept() all child sockets
3-2. check if all children have the same SO_INCOMING_CPU with the server
The root cause was the close() in 2-4. and net.ipv4.tcp_tw_reuse.
In a loop of 2., close() changed the client state to FIN_WAIT_2, and
the peer transitioned to CLOSE_WAIT.
In another loop of 2., connect() happened to select the same port of
the FIN_WAIT_2 socket, and it was reused as the default value of
net.ipv4.tcp_tw_reuse is 2.
As a result, the new client sent SYN to the CLOSE_WAIT socket from
a different CPU, and the receiver's sk_incoming_cpu was overwritten
with unexpected CPU ID.
Also, the SYN had a different SEQ number, so the CLOSE_WAIT socket
responded with Challenge ACK. The new client properly returned RST
and effectively killed the CLOSE_WAIT socket.
This way, all clients were created successfully, but the error was
detected later by 3-2., ASSERT_EQ(cpu, i).
To avoid the failure, let's make sure that (i) the number of clients
is less than the number of available ports and (ii) such reuse never
happens.
Fixes: 6df96146b2 ("selftest: Add test for SO_INCOMING_CPU.")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240120031642.67014-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Prevent warnings of the form:
tools/testing/nvdimm/config_check.c:4:6: error: no previous prototype
for ‘check’ [-Werror=missing-prototypes]
...by locally disabling some warnings.
It turns out that:
Commit 0fcb70851f ("Makefile.extrawarn: turn on missing-prototypes globally")
...in addition to expanding in-tree coverage, also impacts out-of-tree
module builds like those in tools/testing/nvdimm/.
Filter out the warning options on unit test code that does not effect
mainline builds.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/170543984331.460832.1780246477583036191.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Prevent warnings of the form:
tools/testing/cxl/test/mock.c:44:6: error: no previous prototype for
‘__wrap_is_acpi_device_node’ [-Werror=missing-prototypes]
tools/testing/cxl/test/mock.c:63:5: error: no previous prototype for
‘__wrap_acpi_table_parse_cedt’ [-Werror=missing-prototypes]
tools/testing/cxl/test/mock.c:81:13: error: no previous prototype for
‘__wrap_acpi_evaluate_integer’ [-Werror=missing-prototypes]
...by locally disabling some warnings.
It turns out that:
Commit 0fcb70851f ("Makefile.extrawarn: turn on missing-prototypes globally")
...in addition to expanding in-tree coverage, also impacts out-of-tree
module builds like those in tools/testing/cxl/.
Filter out the warning options on unit test code that does not effect
mainline builds.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/170543983780.460832.10920261849128601697.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Indexing with mm_cid is incompatible with skipping disallowed cpumask,
because concurrency IDs are based on a virtual ID allocation which is
unrelated to the physical CPU mask.
These issues can be reproduced by running the rseq selftests under a
taskset which excludes CPU 0, e.g.
taskset -c 10-20 ./run_param_test.sh
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The test proves that a syscall can be livepatched. It is interesting
because syscalls are called a tricky way. Also the process gets
livepatched either when sleeping in the userspace or when entering
or leaving the kernel space.
The livepatch is a bit tricky:
1. The syscall function name is architecture specific. Also
ARCH_HAS_SYSCALL_WRAPPER must be taken in account.
2. The syscall must stay working the same way for other processes
on the system. It is solved by decrementing a counter only
for PIDs of the test processes. It means that the test processes
has to call the livepatched syscall at least once.
The test creates one userspace process per online cpu. The processes
are calling getpid in a busy loop. The intention is to create random
locations when the livepatch gets enabled. Nothing is guarantted.
The magic is in the randomness.
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The modules are being moved from lib/livepatch to
tools/testing/selftests/livepatch/test_modules.
This code moving will allow writing more complex tests, like for example an
userspace C code that will call a livepatched kernel function.
The modules are now built as out-of-tree
modules, but being part of the kernel source means they will be maintained.
Another advantage of the code moving is to be able to easily change,
debug and rebuild the tests by running make on the selftests/livepatch
directory, which is not currently possible since the modules on
lib/livepatch are build and installed using the "modules" target.
The current approach also keeps the ability to execute the tests manually
by executing the scripts inside selftests/livepatch directory, as it's
currently supported. If the modules are modified, they needed to be
rebuilt before running the scripts though.
The modules are built before running the selftests when using the
kselftest invocations:
make kselftest TARGETS=livepatch
or
make -C tools/testing/selftests/livepatch run_tests
Having the modules being built as out-of-modules requires changing the
currently used 'modprobe' by 'insmod' and adapt the test scripts that
check for the kernel message buffer.
Now it is possible to only compile the modules by running:
make -C tools/testing/selftests/livepatch/
This way the test modules and other test program can be built in order
to be packaged if so desired.
As there aren't any modules being built on lib/livepatch, remove the
TEST_LIVEPATCH Kconfig and it's references.
Note: "make gen_tar" packages the pre-built binaries into the tarball.
It means that it will store the test modules pre-built for
the kernel running on the build host.
Note that these modules need not binary compatible with
the kernel built from the same sources. But the same
is true for other packaged selftest binaries.
The entire kernel sources are needed for rebuilding
the selftests on another system.
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add TEST_GEN_MODS_DIR variable for kselftests. It can point to
a directory containing kernel modules that will be used by
selftest scripts.
The modules are built as external modules for the running kernel.
As a result they are always binary compatible and the same tests
can be used for older or newer kernels.
The build requires "kernel-devel" package to be installed.
For example, in the upstream sources, the rpm devel package
is produced by "make rpm-pkg"
The modules can be built independently by
make -C tools/testing/selftests/livepatch/
or they will be automatically built before running the tests via
make -C tools/testing/selftests/livepatch/ run_tests
Note that they are _not_ built when running the standalone
tests by calling, for example, ./test-state.sh.
Along with TEST_GEN_MODS_DIR, it was necessary to create a new install
rule. INSTALL_MODS_RULE is needed because INSTALL_SINGLE_RULE would
copy the entire TEST_GEN_MODS_DIR directory to the destination, even
the files created by Kbuild to compile the modules. The new install
rule copies only the .ko files, as we would expect the gen_tar to work.
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When walking directory trees, instead of looking for specific files and
running dirname to get the parent folder, traverse all folders and
ignore the ones not containing the desired files. This avoids the need
to call dirname inside the loop, which drastically decreases run time:
Running locally on a mt8192-asurada-spherion, which reports 160 test
cases, has gone from 5.5s to 2.9s, while running remotely with an
nfsroot has gone from 13.5s to 5.5s.
This change has a side-effect, which is that the root DT node now
also shows in the output, even though it isn't expected to bind to a
driver. However there shouldn't be a matching driver for the board
compatible, so the end result will be just an extra skipped test:
ok 1 / # SKIP
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/310391e8-fdf2-4c2f-a680-7744eb685177@sirena.org.uk
Fixes: 14571ab1ad ("kselftest: Add new test for detecting unprobed Devicetree devices")
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240122-dt-kselftest-dirname-perf-fix-v2-1-f1630532fd38@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
One build issue comes up due to both mount.h included dev_in_maps.c
In file included from dev_in_maps.c:10:
/usr/include/sys/mount.h:35:3: error: expected identifier before numeric constant
35 | MS_RDONLY = 1, /* Mount read-only. */
| ^~~~~~~~~
In file included from dev_in_maps.c:13:
Remove one of them to solve conflict, another error comes up:
dev_in_maps.c:170:6: error: implicit declaration of function ‘mount’ [-Werror=implicit-function-declaration]
170 | if (mount(NULL, "/", NULL, MS_SLAVE | MS_REC, NULL) == -1) {
| ^~~~~
cc1: all warnings being treated as errors
and then , add sys_mount definition to solve it
After both above, dev_in_maps.c can be built correctly on my mache(gcc 10.2,glibc-2.32,kernel-5.10)
Signed-off-by: Hu Yadi <hu.yadi@h3c.com>
Link: https://lore.kernel.org/r/20240112074059.29673-1-hu.yadi@h3c.com
Acked-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull more RISC-V updates from Palmer Dabbelt:
- Support for tuning for systems with fast misaligned accesses.
- Support for SBI-based suspend.
- Support for the new SBI debug console extension.
- The T-Head CMOs now use PA-based flushes.
- Support for enabling the V extension in kernel code.
- Optimized IP checksum routines.
- Various ftrace improvements.
- Support for archrandom, which depends on the Zkr extension.
- The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
* tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits)
lib: checksum: Fix build with CONFIG_NET=n
riscv: lib: Check if output in asm goto supported
riscv: Fix build error on rv32 + XIP
riscv: optimize ELF relocation function in riscv
RISC-V: Implement archrandom when Zkr is available
riscv: Optimize hweight API with Zbb extension
riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi
samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]
riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
riscv: ftrace: Make function graph use ftrace directly
riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
kunit: Add tests for csum_ipv6_magic and ip_fast_csum
riscv: Add checksum library
riscv: Add checksum header
riscv: Add static key for misaligned accesses
asm-generic: Improve csum_fold
RISC-V: selftests: cbo: Ensure asm operands match constraints
...
When tests are run by runner.sh, bond_options.sh gets killed before
it can complete:
make -C tools/testing/selftests run_tests TARGETS="drivers/net/bonding"
[...]
# timeout set to 120
# selftests: drivers/net/bonding: bond_options.sh
# TEST: prio (active-backup miimon primary_reselect 0) [ OK ]
# TEST: prio (active-backup miimon primary_reselect 1) [ OK ]
# TEST: prio (active-backup miimon primary_reselect 2) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 0) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 1) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 2) [ OK ]
#
not ok 7 selftests: drivers/net/bonding: bond_options.sh # TIMEOUT 120 seconds
This test includes many sleep statements, at least some of which are
related to timers in the operation of the bonding driver itself. Increase
the test timeout to allow the test to complete.
I ran the test in slightly different VMs (including one without HW
virtualization support) and got runtimes of 13m39.760s, 13m31.238s, and
13m2.956s. Use a ~1.5x "safety factor" and set the timeout to 1200s.
Fixes: 42a8d4aaea ("selftests: bonding: add bonding prio option test")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240116104402.1203850a@kernel.org/#t
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240118001233.304759-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The KVM RISC-V allows Zvfh[min] extensions for Guest/VM so let us
add these extensions to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The KVM RISC-V allows vector crypto extensions for Guest/VM so let us
add these extensions to get-reg-list test. This includes extensions
Zvbb, Zvbc, Zvkb, Zvkg, Zvkned, Zvknha, Zvknhb, Zvksed, Zvksh, and Zvkt.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The KVM RISC-V allows scaler crypto extensions for Guest/VM so let us
add these extensions to get-reg-list test. This includes extensions
Zbkb, Zbkc, Zbkx, Zknd, Zkne, Zknh, Zkr, Zksed, Zksh, and Zkt.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Previous releases - regressions:
- Revert "net: rtnetlink: Enslave device before bringing it up",
breaks the case inverse to the one it was trying to fix
- net: dsa: fix oob access in DSA's netdevice event handler
dereference netdev_priv() before check its a DSA port
- sched: track device in tcf_block_get/put_ext() only for clsact
binder types
- net: tls, fix WARNING in __sk_msg_free when record becomes full
during splice and MORE hint set
- sfp-bus: fix SFP mode detect from bitrate
- drv: stmmac: prevent DSA tags from breaking COE
Previous releases - always broken:
- bpf: fix no forward progress in in bpf_iter_udp if output buffer is
too small
- bpf: reject variable offset alu on registers with a type of
PTR_TO_FLOW_KEYS to prevent oob access
- netfilter: tighten input validation
- net: add more sanity check in virtio_net_hdr_to_skb()
- rxrpc: fix use of Don't Fragment flag on RESPONSE packets, avoid
infinite loop
- amt: do not use the portion of skb->cb area which may get clobbered
- mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
i40e: Include types.h to some headers
ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work
selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes
selftests: mlxsw: qos_pfc: Remove wrong description
mlxsw: spectrum_router: Register netdevice notifier before nexthop
mlxsw: spectrum_acl_tcam: Fix stack corruption
mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path
mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure
ethtool: netlink: Add missing ethnl_ops_begin/complete
selftests: bonding: Add more missing config options
selftests: netdevsim: add a config file
libbpf: warn on unexpected __arg_ctx type when rewriting BTF
selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
bpf: enforce types for __arg_ctx-tagged arguments in global subprogs
bpf: extract bpf_ctx_convert_map logic and make it more reusable
libbpf: feature-detect arg:ctx tag support in kernel
ipvs: avoid stat macros calls from preemptible context
netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description
netfilter: nf_tables: skip dead set elements in netlink dump
netfilter: nf_tables: do not allow mismatch field size and set key length
...
Pull CXL (Compute Express Link) updates from Dan Williams:
"The bulk of this update is support for enumerating the performance
capabilities of CXL memory targets and connecting that to a platform
CXL memory QoS class. Some follow-on work remains to hook up this data
into core-mm policy, but that is saved for v6.9.
The next significant update is unifying how CXL event records (things
like background scrub errors) are processed between so called
"firmware first" and native error record retrieval. The CXL driver
handler that processes the record retrieved from the device mailbox is
now the handler for that same record format coming from an EFI/ACPI
notification source.
This also contains miscellaneous feature updates, like Get Timestamp,
and other fixups.
Summary:
- Add support for parsing the Coherent Device Attribute Table (CDAT)
- Add support for calculating a platform CXL QoS class from CDAT data
- Unify the tracing of EFI CXL Events with native CXL Events.
- Add Get Timestamp support
- Miscellaneous cleanups and fixups"
* tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits)
cxl/core: use sysfs_emit() for attr's _show()
cxl/pci: Register for and process CPER events
PCI: Introduce cleanup helpers for device reference counts and locks
acpi/ghes: Process CXL Component Events
cxl/events: Create a CXL event union
cxl/events: Separate UUID from event structures
cxl/events: Remove passing a UUID to known event traces
cxl/events: Create common event UUID defines
cxl/events: Promote CXL event structures to a core header
cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe()
cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge()
cxl: Fix device reference leak in cxl_port_perf_data_calculate()
cxl: Convert find_cxl_root() to return a 'struct cxl_root *'
cxl: Introduce put_cxl_root() helper
cxl/port: Fix missing target list lock
cxl/port: Fix decoder initialization when nr_targets > interleave_ways
cxl/region: fix x9 interleave typo
cxl/trace: Pass UUID explicitly to event traces
cxl/region: use %pap format to print resource_size_t
cxl/region: Add dev_dbg() detail on failure to allocate HPA space
...
Pull iommufd updates from Jason Gunthorpe:
"This brings the first of three planned user IO page table invalidation
operations:
- IOMMU_HWPT_INVALIDATE allows invalidating the IOTLB integrated into
the iommu itself. The Intel implementation will also generate an
ATC invalidation to flush the device IOTLB as it unambiguously
knows the device, but other HW will not.
It goes along with the prior PR to implement userspace IO page tables
(aka nested translation for VMs) to allow Intel to have full
functionality for simple cases. An Intel implementation of the
operation is provided.
Also fix a small bug in the selftest mock iommu driver probe"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Check the bus type during probe
iommu/vt-d: Add iotlb flush for nested domain
iommufd: Add data structure for Intel VT-d stage-1 cache invalidation
iommufd/selftest: Add coverage for IOMMU_HWPT_INVALIDATE ioctl
iommufd/selftest: Add IOMMU_TEST_OP_MD_CHECK_IOTLB test op
iommufd/selftest: Add mock_domain_cache_invalidate_user support
iommu: Add iommu_copy_struct_from_user_array helper
iommufd: Add IOMMU_HWPT_INVALIDATE
iommu: Add cache_invalidate_user op
Pull tracing updates from Steven Rostedt:
- Allow kernel trace instance creation to specify what events are
created
Inside the kernel, a subsystem may create a tracing instance that it
can use to send events to user space. This sub-system may not care
about the thousands of events that exist in eventfs. Allow the
sub-system to specify what sub-systems of events it cares about, and
only those events are exposed to this instance.
- Allow the ring buffer to be broken up into bigger sub-buffers than
just the architecture page size.
A new tracefs file called "buffer_subbuf_size_kb" is created. The
user can now specify a minimum size the sub-buffer may be in
kilobytes. Note, that the implementation currently make the
sub-buffer size a power of 2 pages (1, 2, 4, 8, 16, ...) but the user
only writes in kilobyte size, and the sub-buffer will be updated to
the next size that it will can accommodate it. If the user writes in
10, it will change the size to be 4 pages on x86 (16K), as that is
the next available size that can hold 10K pages.
- Update the debug output when a corrupt time is detected in the ring
buffer. If the ring buffer detects inconsistent timestamps, there's a
debug config options that will dump the contents of the meta data of
the sub-buffer that is used for debugging. Add some more information
to this dump that helps with debugging.
- Add more timestamp debugging checks (only triggers when the config is
enabled)
- Increase the trace_seq iterator to 2 page sizes.
- Allow strings written into tracefs_marker to be larger. Up to just
under 2 page sizes (based on what trace_seq can hold).
- Increase the trace_maker_raw write to be as big as a sub-buffer can
hold.
- Remove 32 bit time stamp logic, now that the rb_time_cmpxchg() has
been removed.
- More selftests were added.
- Some code clean ups as well.
* tag 'trace-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits)
ring-buffer: Remove stale comment from ring_buffer_size()
tracing histograms: Simplify parse_actions() function
tracing/selftests: Remove exec permissions from trace_marker.tc test
ring-buffer: Use subbuf_order for buffer page masking
tracing: Update subbuffer with kilobytes not page order
ringbuffer/selftest: Add basic selftest to test changing subbuf order
ring-buffer: Add documentation on the buffer_subbuf_order file
ring-buffer: Just update the subbuffers when changing their allocation order
ring-buffer: Keep the same size when updating the order
tracing: Stop the tracing while changing the ring buffer subbuf size
tracing: Update snapshot order along with main buffer order
ring-buffer: Make sure the spare sub buffer used for reads has same size
ring-buffer: Do no swap cpu buffers if order is different
ring-buffer: Clear pages on error in ring_buffer_subbuf_order_set() failure
ring-buffer: Read and write to ring buffers with custom sub buffer size
ring-buffer: Set new size of the ring buffer sub page
ring-buffer: Add interface for configuring trace sub buffer size
ring-buffer: Page size per ring buffer
ring-buffer: Have ring_buffer_print_page_header() be able to access ring_buffer_iter
ring-buffer: Check if absolute timestamp goes backwards
...
Pull x86 SGX updates from Dave Hansen:
"This time, these are entirely confined to SGX selftests fixes.
The mini SGX enclave built by the selftests has garnered some
attention because it stands alone and does not need the sizable
infrastructure of the official SGX SDK. I think that's why folks are
suddently interested in cleaning it up.
- Clean up selftest compilation issues, mostly from non-gcc compilers
- Avoid building selftests when not on x86"
* tag 'x86_sgx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/sgx: Skip non X86_64 platform
selftests/sgx: Remove incomplete ABI sanitization code in test enclave
selftests/sgx: Discard unsupported ELF sections
selftests/sgx: Ensure expected location of test enclave buffer
selftests/sgx: Ensure test enclave buffer is entirely preserved
selftests/sgx: Fix linker script asserts
selftests/sgx: Handle relocations in test enclave
selftests/sgx: Produce static-pie executable for test enclave
selftests/sgx: Remove redundant enclave base address save/restore
selftests/sgx: Specify freestanding environment for enclave compilation
selftests/sgx: Separate linker options
selftests/sgx: Include memory clobber for inline asm in test enclave
selftests/sgx: Fix uninitialized pointer dereferences in encl_get_entry
selftests/sgx: Fix uninitialized pointer dereference in error path
Daniel Borkmann says:
====================
pull-request: bpf 2024-01-18
We've added 10 non-merge commits during the last 5 day(s) which contain
a total of 12 files changed, 806 insertions(+), 51 deletions(-).
The main changes are:
1) Fix an issue in bpf_iter_udp under backward progress which prevents
user space process from finishing iteration, from Martin KaFai Lau.
2) Fix BPF verifier to reject variable offset alu on registers with a type
of PTR_TO_FLOW_KEYS to prevent oob access, from Hao Sun.
3) Follow up fixes for kernel- and libbpf-side logic around handling
arg:ctx tagged arguments of BPF global subprogs, from Andrii Nakryiko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
libbpf: warn on unexpected __arg_ctx type when rewriting BTF
selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
bpf: enforce types for __arg_ctx-tagged arguments in global subprogs
bpf: extract bpf_ctx_convert_map logic and make it more reusable
libbpf: feature-detect arg:ctx tag support in kernel
selftests/bpf: Add test for alu on PTR_TO_FLOW_KEYS
bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS
selftests/bpf: Test udp and tcp iter batching
bpf: Avoid iter->offset making backward progress in bpf_iter_udp
bpf: iter_udp: Retry with a larger batch size without going back to the previous bucket
====================
Link: https://lore.kernel.org/r/20240118153936.11769-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'qos_pfc' test checks PFC behavior. The idea is to limit the traffic
using a shaper somewhere in the flow of the packets. In this area, the
buffer is smaller than the buffer at the beginning of the flow, so it fills
up until there is no more space left. The test configures there PFC
which is supposed to notice that the headroom is filling up and send PFC
Xoff to indicate the transmitter to stop sending traffic for the priorities
sharing this PG.
The Xon/Xoff threshold is auto-configured and always equal to
2*(MTU rounded up to cell size). Even after sending the PFC Xoff packet,
traffic will keep arriving until the transmitter receives and processes
the PFC packet. This amount of traffic is known as the PFC delay allowance.
Currently the buffer for the delay traffic is configured as 100KB. The
MTU in the test is 10KB, therefore the threshold for Xoff is about 20KB.
This allows 80KB extra to be stored in this buffer.
8-lane ports use two buffers among which the configured buffer is split,
the Xoff threshold then applies to each buffer in parallel.
The test does not take into account the behavior of 8-lane ports, when the
ports are configured to 400Gbps with 8 lanes or 800Gbps with 8 lanes,
packets are dropped and the test fails.
Check if the relevant ports use 8 lanes, in such case double the size of
the buffer, as the headroom is split half-half.
Cc: Shuah Khan <shuah@kernel.org>
Fixes: bfa804784e ("selftests: mlxsw: Add a PFC test")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/23ff11b7dff031eb04a41c0f5254a2b636cd8ebb.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When tc filters are first added to a net device, the corresponding local
port gets bound to an ACL group in the device. The group contains a list
of ACLs. In turn, each ACL points to a different TCAM region where the
filters are stored. During forwarding, the ACLs are sequentially
evaluated until a match is found.
One reason to place filters in different regions is when they are added
with decreasing priorities and in an alternating order so that two
consecutive filters can never fit in the same region because of their
key usage.
In Spectrum-2 and newer ASICs the firmware started to report that the
maximum number of ACLs in a group is more than 16, but the layout of the
register that configures ACL groups (PAGT) was not updated to account
for that. It is therefore possible to hit stack corruption [1] in the
rare case where more than 16 ACLs in a group are required.
Fix by limiting the maximum ACL group size to the minimum between what
the firmware reports and the maximum ACLs that fit in the PAGT register.
Add a test case to make sure the machine does not crash when this
condition is hit.
[1]
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120
[...]
dump_stack_lvl+0x36/0x50
panic+0x305/0x330
__stack_chk_fail+0x15/0x20
mlxsw_sp_acl_tcam_group_update+0x116/0x120
mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110
mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20
mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0
mlxsw_sp_acl_rule_add+0x47/0x240
mlxsw_sp_flower_replace+0x1a9/0x1d0
tc_setup_cb_add+0xdc/0x1c0
fl_hw_replace_filter+0x146/0x1f0
fl_change+0xc17/0x1360
tc_new_tfilter+0x472/0xb90
rtnetlink_rcv_msg+0x313/0x3b0
netlink_rcv_skb+0x58/0x100
netlink_unicast+0x244/0x390
netlink_sendmsg+0x1e4/0x440
____sys_sendmsg+0x164/0x260
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xc0
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Fixes: c3ab435466 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Reported-by: Orel Hagag <orelh@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/2d91c89afba59c22587b444994ae419dbea8d876.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lately, a bug was found when many TC filters are added - at some point,
several bugs are printed to dmesg [1] and the switch is crashed with
segmentation fault.
The issue starts when gen_pool_free() fails because of unexpected
behavior - a try to free memory which is already freed, this leads to BUG()
call which crashes the switch and makes many other bugs.
Trying to track down the unexpected behavior led to a bug in eRP code. The
function mlxsw_sp_acl_erp_table_alloc() gets a pointer to the allocated
index, sets the value and returns an error code. When gen_pool_alloc()
fails it returns address 0, we track it and return -ENOBUFS outside, BUT
the call for gen_pool_alloc() already override the index in erp_table
structure. This is a problem when such allocation is done as part of
table expansion. This is not a new table, which will not be used in case
of allocation failure. We try to expand eRP table and override the
current index (non-zero) with zero. Then, it leads to an unexpected
behavior when address 0 is freed twice. Note that address 0 is valid in
erp_table->base_index and indeed other tables use it.
gen_pool_alloc() fails in case that there is no space left in the
pre-allocated pool, in our case, the pool is limited to
ACL_MAX_ERPT_BANK_SIZE, which is read from hardware. When more than max
erp entries are required, we exceed the limit and return an error, this
error leads to "Failed to migrate vregion" print.
Fix this by changing erp_table->base_index only in case of a successful
allocation.
Add a test case for such a scenario. Without this fix it causes
segmentation fault:
$ TESTS="max_erp_entries_test" ./tc_flower.sh
./tc_flower.sh: line 988: 1560 Segmentation fault tc filter del dev $h2 ingress chain $i protocol ip pref $i handle $j flower &>/dev/null
[1]:
kernel BUG at lib/genalloc.c:508!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 6 PID: 3531 Comm: tc Not tainted 6.7.0-rc5-custom-ga6893f479f5e #1
Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021
RIP: 0010:gen_pool_free_owner+0xc9/0xe0
...
Call Trace:
<TASK>
__mlxsw_sp_acl_erp_table_other_dec+0x70/0xa0 [mlxsw_spectrum]
mlxsw_sp_acl_erp_mask_destroy+0xf5/0x110 [mlxsw_spectrum]
objagg_obj_root_destroy+0x18/0x80 [objagg]
objagg_obj_destroy+0x12c/0x130 [objagg]
mlxsw_sp_acl_erp_mask_put+0x37/0x50 [mlxsw_spectrum]
mlxsw_sp_acl_ctcam_region_entry_remove+0x74/0xa0 [mlxsw_spectrum]
mlxsw_sp_acl_ctcam_entry_del+0x1e/0x40 [mlxsw_spectrum]
mlxsw_sp_acl_tcam_ventry_del+0x78/0xd0 [mlxsw_spectrum]
mlxsw_sp_flower_destroy+0x4d/0x70 [mlxsw_spectrum]
mlxsw_sp_flow_block_cb+0x73/0xb0 [mlxsw_spectrum]
tc_setup_cb_destroy+0xc1/0x180
fl_hw_destroy_filter+0x94/0xc0 [cls_flower]
__fl_delete+0x1ac/0x1c0 [cls_flower]
fl_destroy+0xc2/0x150 [cls_flower]
tcf_proto_destroy+0x1a/0xa0
...
mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion
mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion
Fixes: f465261aa1 ("mlxsw: spectrum_acl: Implement common eRP core")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4cfca254dfc0e5d283974801a24371c7b6db5989.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a followup to commit 03fb8565c8 ("selftests: bonding: add missing
build configs"), add more networking-specific config options which are
needed for bonding tests.
For testing, I used the minimal config generated by virtme-ng and I added
the options in the config file. All bonding tests passed.
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management") # for ipv6
Fixes: 6cbe791c0f ("kselftest: bonding: add num_grat_arp test") # for tc options
Fixes: 222c94ec0a ("selftests: bonding: add tests for ether type changes") # for nlmon
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240116154926.202164-1-bpoirier@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
netdevsim tests aren't very well integrated with kselftest,
which has its advantages and disadvantages. But regardless
of the intended integration - a config file to know what kernel
to build is very useful, add one.
Fixes: fc4c93f145 ("selftests: add basic netdevsim devlink flash testing")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240116154311.1945801-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
