Since commit f5769faeec ("net: Namespace-ify sysctl_optmem_max")
optmem_max is per-netns, so need of switching to root namespace.
It seems trivial to keep the old logic working, so going to keep it for
a while (at least, until kernel with netns-optmem_max will be release).
Currently, there is a test that checks that optmem_max limit applies to
TCP-AO keys and a little benchmark that measures linked-list TCP-AO keys
scaling, those are fixed by this.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In unsigned-md5 selftests ip_route_add() is not needed in
client_add_ip(): the route was pre-setup in __test_init() => link_init()
for subnet, rather than a specific ip-address.
Currently, __ip_route_add() mistakenly always sets VRF table
to RT_TABLE_MAIN - this seems to have sneaked in during unsigned-md5
tests debugging. That also explains, why ip_route_add_vrf() ignored
EEXIST, returned by fib6.
Yet, keep EEXIST ignoring in bench-lookups selftests as it's expected
that those selftests may add the same (duplicate) routes.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tc ipt action was intended to run all netfilter/iptables target.
Unfortunately it has not benefitted over the years from proper updates when
netfilter changes, and for that reason it has remained rudimentary.
Pinging a bunch of people that i was aware were using this indicates that
removing it wont affect them.
Retire it to reduce maintenance efforts. Buh-bye.
Reviewed-by: Victor Noguiera <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
netfilter pull request 23-12-22
The following patchset contains Netfilter updates for net-next:
1) Add locking for NFT_MSG_GETSETELEM_RESET requests, to address a
race scenario with two concurrent processes running a dump-and-reset
which exposes negative counters to userspace, from Phil Sutter.
2) Use GFP_KERNEL in pipapo GC, from Florian Westphal.
3) Reorder nf_flowtable struct members, place the read-mostly parts
accessed by the datapath first. From Florian Westphal.
4) Set on dead flag for NFT_MSG_NEWSET in abort path,
from Florian Westphal.
5) Support filtering zone in ctnetlink, from Felix Huettner.
6) Bail out if user tries to redefine an existing chain with different
type in nf_tables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
bpf-next-for-netdev
The following pull-request contains BPF updates for your *net-next* tree.
We've added 22 non-merge commits during the last 3 day(s) which contain
a total of 23 files changed, 652 insertions(+), 431 deletions(-).
The main changes are:
1) Add verifier support for annotating user's global BPF subprogram arguments
with few commonly requested annotations for a better developer experience,
from Andrii Nakryiko.
These tags are:
- Ability to annotate a special PTR_TO_CTX argument
- Ability to annotate a generic PTR_TO_MEM as non-NULL
2) Support BPF verifier tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like, from
Menglong Dong.
3) Fix a warning in bpf_mem_cache's check_obj_size() as reported by LKP, from Hou Tao.
4) Re-support uid/gid options when mounting bpffs which had to be reverted with
the prior token series revert to avoid conflicts, from Daniel Borkmann.
5) Fix a libbpf NULL pointer dereference in bpf_object__collect_prog_relos() found
from fuzzing the library with malformed ELF files, from Mingyi Zhang.
6) Skip DWARF sections in libbpf's linker sanity check given compiler options to
generate compressed debug sections can trigger a rejection due to misalignment,
from Alyssa Ross.
7) Fix an unnecessary use of the comma operator in BPF verifier, from Simon Horman.
8) Fix format specifier for unsigned long values in cpustat sample, from Colin Ian King.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add guest_sbi_probe_extension(), allowing guest code to probe for
SBI extensions. As guest_sbi_probe_extension() needs
SBI_ERR_NOT_SUPPORTED, take the opportunity to bring in all SBI
error codes. We don't bring in all current extension IDs or base
extension function IDs though, even though we need one of each,
because we'd prefer to bring those in as necessary.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
sbi_ecall() isn't ucall specific and its prototype is already in
processor.h. Move its implementation to processor.c.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
When running tests on a CI system (e.g. LAVA) it is useful to output test
results in TAP (Test Anything Protocol) format so that the CI can parse
the fine-grained results to show regressions. Many of the mm selftest
binaries already output using the TAP format. And the kselftests runner
(run_kselftest.sh) also uses the format. CI systems such as LAVA can
already handle nested TAP reports. However, with the mm selftests we have
3 levels of nesting (run_kselftest.sh -> run_vmtests.sh -> individual test
binaries) and the middle level did not previously support TAP, which
breaks the parser.
Let's fix that by teaching run_vmtests.sh to output using the TAP format.
Ideally this would be opt-in via a command line argument to avoid the
possibility of breaking anyone's existing scripts that might scrape the
output. However, it is not possible to pass arguments to tests invoked
via run_kselftest.sh. So I've implemented an opt-out option (-n), which
will revert to the existing output format.
Future changes to this file should be aware of 2 new conventions:
- output that is part of the TAP reporting is piped through tap_output
- general output is piped through tap_prefix
Link: https://lkml.kernel.org/r/20231214162434.3580009-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SBI extension registers may not be present and indeed when
running on a platform without sscofpmf the PMU SBI extension
is not. Move the SBI extension registers from the base set of
registers to the filter list. Individual configs should test
for any that may or may not be present separately. Since
the PMU extension may disappear and the DBCN extension is only
present in later kernels, separate them from the rest into
their own configs. The rest are lumped together into the same
config.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Always use register subtypes in the get-reg-list test when registers
have them. The only registers neglecting to do so were ISA extension
registers. While we don't really need to use KVM_REG_RISCV_ISA_SINGLE
(since it's zero), the main purpose is to avoid confusion and to
self-document the tests. Also add print support for the multi
registers like SBI extensions have, even though they're only used for
debugging.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
While adding RISCV_SBI_EXT_REG(), acknowledge that some registers
have subtypes and extend __kvm_reg_id() to take a subtype field.
Then, update all macros to set the new field appropriately. The
general CSR macro gets renamed to include "GENERAL", but the other
macros, like the new RISCV_SBI_EXT_REG, just use the SINGLE subtype.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
These registers are no longer getting added to get-reg-list.
We keep sbi_ext_multi_id_to_str() for printing, even though
we don't expect it to normally be used, because it may be
useful for debug.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Various ISA extension reg_list have common pattern so let us generate
these using macros.
We define two macros for the above purpose:
1) KVM_ISA_EXT_SIMPLE_CONFIG - Macro to generate reg_list for
ISA extension without any additional ONE_REG registers
2) KVM_ISA_EXT_SUBLIST_CONFIG - Macro to generate reg_list for
ISA extension with additional ONE_REG registers
This patch also adds the missing config for svnapot.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
In some cases the result of test were hidden inside the stdout and it
was difficult to identify when a test was skipped and why.
List of changes
1. Capitalize all the words that express a test result : "OK", "SKIPPED"
and "FAIL".
2. Place all test result text at the end of the message. This will
prevent the result from being hidden when stdout is verbose.
3. Any other explanation that comes after the result text will be placed
in a new line.
4. All failures are marked as "FAIL"
5. Pipped the failure to stderr in tests 8, 9, 10.
6. Replaced bogus "FAIL" with "SKIPPED" in test 0007
7. All "..." are prefixed and followed by a space.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Basic test to ensure that empty directories can be registered and that
they in turn can serve as a base dir for other registrations.
Add one test to the sysctl selftest module. It first registers an empty
directory under "empty_add" and then uses that as a base to register
another empty dir.
The sysctl bash script then checks that "empty_add" is present and that
there an empty directory within it.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Pull misc fixes from Andrew Morton:
"11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues
or are not considered backporting material"
* tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add an old address for Naoya Horiguchi
mm/memory-failure: cast index to loff_t before shifting it
mm/memory-failure: check the mapcount of the precise page
mm/memory-failure: pass the folio and the page to collect_procs()
selftests: secretmem: floor the memory size to the multiple of page_size
mm: migrate high-order folios in swap cache correctly
maple_tree: do not preallocate nodes for slot stores
mm/filemap: avoid buffered read/write race to read inconsistent data
kunit: kasan_test: disable fortify string checker on kmalloc_oob_memset
kexec: select CRYPTO from KEXEC_FILE instead of depending on it
kexec: fix KEXEC_FILE dependencies
Since previous commit, MPTCP has support for IP_BIND_ADDRESS_NO_PORT and
IP_LOCAL_PORT_RANGE sockopts.
Add ip4_mptcp and ip6_mptcp fixture variants to ip_local_port_range
selftest to provide selftest coverage for these sockopts.
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix a race condition in updating external interrupt for
trap-n-emulated IMSIC swfile
- Fix print_reg defaults in get-reg-list selftest
ARM:
- Ensure a vCPU's redistributor is unregistered from the MMIO bus if
vCPU creation fails
- Fix building KVM selftests for arm64 from the top-level Makefile
x86:
- Fix breakage for SEV-ES guests that use XSAVES
Selftests:
- Fix bad use of strcat(), by not using strcat() at all"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV: Do not intercept accesses to MSR_IA32_XSS for SEV-ES guests
KVM: selftests: Fix dynamic generation of configuration names
RISCV: KVM: update external interrupt atomically for IMSIC swfile
KVM: riscv: selftests: Fix get-reg-list print_reg defaults
KVM: selftests: Ensure sysreg-defs.h is generated at the expected path
KVM: Convert comment into an assertion in kvm_io_bus_register_dev()
KVM: arm64: vgic: Ensure that slots_lock is held in vgic_register_all_redist_iodevs()
KVM: arm64: vgic: Force vcpu vgic teardown on vcpu destroy
KVM: arm64: vgic: Add a non-locking primitive for kvm_vgic_vcpu_destroy()
KVM: arm64: vgic: Simplify kvm_vgic_destroy()
Some devices have errata due to which they cannot report ETH_ZLEN (60)
in the rx-min-frag-size. This was foreseen of course, and lldpad has
logic that when we request it to advertise addFragSize 0, it will round
it up to the lowest value that is _actually_ supported by the hardware.
The problem is that the selftest expects lldpad to report back to us the
same value as we requested.
Make the selftest smarter by figuring out on its own what is a
reasonable value to expect.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a variable RUN_IN_NETNS if the user wants to run all the selected tests
in namespace in parallel. With this, we can save a lot of testing time.
Note that some tests may not fit to run in namespace, e.g.
net/drop_monitor_tests.sh, as the dwdump needs to be run in init ns.
I also added another parameter -p to make all the logs reported separately
instead of mixing them in the stdout or output.log.
Nit: the NUM in run_one is not used, rename it to test_num.
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pmtu test use /bin/sh, so we need to source ./lib.sh instead of lib.sh
Here is the test result after conversion.
# ./pmtu.sh
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
TEST: ipv6: PMTU exceptions [ OK ]
TEST: ipv6: PMTU exceptions - nexthop objects [ OK ]
...
TEST: ipv4: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv6: list and flush cached exceptions [ OK ]
TEST: ipv6: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv4: PMTU exception w/route replace [ OK ]
TEST: ipv4: PMTU exception w/route replace - nexthop objects [ OK ]
TEST: ipv6: PMTU exception w/route replace [ OK ]
TEST: ipv6: PMTU exception w/route replace - nexthop objects [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The setup_loopback and setup_veth use their own way to create namespace.
So let's just re-define server_ns/client_ns to unique name.
At the same time update the namespace name in gro.sh and toeplitz.sh.
As I don't have env to run toeplitz.sh. Here is only the gro test result.
# ./gro.sh
running test ipv4 data
Expected {200 }, Total 1 packets
Received {200 }, Total 1 packets.
...
Gro::large test passed.
All Tests Succeeded!
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
# ./xfrm_policy.sh
PASS: policy before exception matches
PASS: ping to .254 bypassed ipsec tunnel (exceptions)
PASS: direct policy matches (exceptions)
PASS: policy matches (exceptions)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies)
PASS: direct policy matches (exceptions and block policies)
PASS: policy matches (exceptions and block policies)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after hresh changes)
PASS: direct policy matches (exceptions and block policies after hresh changes)
PASS: policy matches (exceptions and block policies after hresh changes)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after hthresh change in ns3)
PASS: direct policy matches (exceptions and block policies after hthresh change in ns3)
PASS: policy matches (exceptions and block policies after hthresh change in ns3)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after htresh change to normal)
PASS: direct policy matches (exceptions and block policies after htresh change to normal)
PASS: policy matches (exceptions and block policies after htresh change to normal)
PASS: policies with repeated htresh change
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
# ./stress_reuseport_listen.sh
listen 24000 socks took 0.47714
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running the test in namespace, the debugfs may not load automatically.
So add a checking to make sure debugfs loaded. Here is the test result
after conversion.
# ./rtnetlink.sh
PASS: policy routing
PASS: route get
...
PASS: address proto IPv4
PASS: address proto IPv6
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test will move the device to netns 1. Add a new test_ns to do this.
Here is the test result after conversion.
# ./netns-name.sh
netns-name.sh [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
# ./gre_gso.sh
TEST: GREv6/v4 - copy file w/ TSO [ OK ]
TEST: GREv6/v4 - copy file w/ GSO [ OK ]
TEST: GREv6/v6 - copy file w/ TSO [ OK ]
TEST: GREv6/v6 - copy file w/ GSO [ OK ]
Tests passed: 4
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial fix for out-of-tree build that I wasn't testing previously:
1. Create a directory for library object files, fixes:
> gcc lib/kconfig.c -Wall -O2 -g -D_GNU_SOURCE -fno-strict-aliasing -I ../../../../../usr/include/ -iquote /tmp/kselftest/kselftest/net/tcp_ao/lib -I ../../../../include/ -o /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o -c
> Assembler messages:
> Fatal error: can't create /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o: No such file or directory
> make[1]: *** [Makefile:46: /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o] Error 1
2. Include $(KHDR_INCLUDES) that's exported by selftests/Makefile, fixes:
> In file included from lib/kconfig.c:6:
> lib/aolib.h:320:45: warning: ‘struct tcp_ao_add’ declared inside parameter list will not be visible outside of this definition or declaration
> 320 | extern int test_prepare_key_sockaddr(struct tcp_ao_add *ao, const char *alg,
> | ^~~~~~~~~~
...
3. While at here, clean-up $(KSFT_KHDR_INSTALL): it's not needed anymore
since commit f2745dc0ba ("selftests: stop using KSFT_KHDR_INSTALL")
4. Also, while at here, drop .DEFAULT_GOAL definition: that has a
self-explaining comment, that was valid when I made these selftests
compile on local v4.19 kernel, but not needed since
commit 8ce72dc325 ("selftests: fix headers_install circular dependency")
Fixes: cfbab37b3d ("selftests/net: Add TCP-AO library")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312190645.q76MmHyq-lkp@intel.com/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KVM/riscv fixes for 6.7, take #1
- Fix a race condition in updating external interrupt for
trap-n-emulated IMSIC swfile
- Fix print_reg defaults in get-reg-list selftest
KVM/arm64 fixes for 6.7, part #2
- Ensure a vCPU's redistributor is unregistered from the MMIO bus
if vCPU creation fails
- Fix building KVM selftests for arm64 from the top-level Makefile
Provide a callback function to the CDAT parser in order to parse the
Device Scoped Memory Affinity Structure (DSMAS). Each DSMAS structure
contains the DPA range and its associated attributes in each entry. See
the CDAT specification for details. The device handle and the DPA range
is saved and to be associated with the DSLBIS locality data when the
DSLBIS entries are parsed. The xarray is a local variable. When the
total path performance data is calculated and storred this xarray can be
discarded.
Coherent Device Attribute Table 1.03 2.1 Device Scoped memory Affinity
Structure (DSMAS)
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319619355.2212653.2675953129671561293.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
As there were bugs found with the ownership of eventfs dynamic file
creation. Add a test to test it.
It will remount tracefs with a different gid and check the ownership of
the eventfs directory, as well as the system and event directories. It
will also check the event file directories.
It then does a chgrp on each of these as well to see if they all get
updated as expected.
Then it remounts the tracefs file system back to the original group and
makes sure that all the updated files and directories were reset back to
the original ownership.
It does the same for instances that change the ownership of he instance
directory.
Note, because the uid is not reset by a remount, it is tested for every
file by switching it to a new owner and then back again.
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull sound fixes from Takashi Iwai:
"Apparently there were so many kids wishing bug fixes that made Santa
busy; here we have lots of fixes although it's a bit late. But all
changes are device-specific, hence it should be relatively safe to
apply.
Most of changes are for Cirrus codecs (for both ASoC and HD-audio),
while the remaining are fixes for TI codecs, HD-audio and USB-audio
quirks"
* tag 'sound-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda: cs35l41: Only add SPI CS GPIO if SPI is enabled in kernel
ALSA: hda: cs35l41: Do not allow uninitialised variables to be freed
ASoC: fsl_sai: Fix channel swap issue on i.MX8MP
ASoC: hdmi-codec: fix missing report for jack initial status
ALSA: hda/realtek: Add quirks for ASUS Zenbook 2023 Models
ALSA: hda: cs35l41: Support additional ASUS Zenbook 2023 Models
ALSA: hda/realtek: Add quirks for ASUS Zenbook 2022 Models
ALSA: hda: cs35l41: Support additional ASUS Zenbook 2022 Models
ALSA: hda/realtek: Add quirks for ASUS ROG 2023 models
ALSA: hda: cs35l41: Support additional ASUS ROG 2023 models
ALSA: hda: cs35l41: Add config table to support many laptops without _DSD
ASoC: Intel: bytcr_rt5640: Add new swapped-speakers quirk
ASoC: Intel: bytcr_rt5640: Add quirk for the Medion Lifetab S10346
kselftest: alsa: fixed a print formatting warning
ALSA: usb-audio: Increase delay in MOTU M quirk
ASoC: tas2781: check the validity of prm_no/cfg_no
ALSA: hda/tas2781: select program 0, conf 0 by default
ALSA: hda/realtek: Add quirk for ASUS ROG GV302XA
ASoC: cs42l43: Don't enable bias sense during type detect
ASoC: Intel: soc-acpi-intel-mtl-match: Change CS35L56 prefixes to AMPn
...
conntrack zones are heavily used by tools like openvswitch to run
multiple virtual "routers" on a single machine. In this context each
conntrack zone matches to a single router, thereby preventing
overlapping IPs from becoming issues.
In these systems it is common to operate on all conntrack entries of a
given zone, e.g. to delete them when a router is deleted. Previously this
required these tools to dump the full conntrack table and filter out the
relevant entries in userspace potentially causing performance issues.
To do this we reuse the existing CTA_ZONE attribute. This was previous
parsed but not used during dump and flush requests. Now if CTA_ZONE is
set we filter these operations based on the provided zone.
However this means that users that previously passed CTA_ZONE will
experience a difference in functionality.
Alternatively CTA_FILTER could have been used for the same
functionality. However it is not yet supported during flush requests and
is only available when using AF_INET or AF_INET6.
Co-developed-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Luca Czesla <luca.czesla@mail.schwarz>
Co-developed-by: Max Lamprecht <max.lamprecht@mail.schwarz>
Signed-off-by: Max Lamprecht <max.lamprecht@mail.schwarz>
Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and bpf.
Current release - regressions:
- bpf: syzkaller found null ptr deref in unix_bpf proto add
- eth: i40e: fix ST code value for clause 45
Previous releases - regressions:
- core: return error from sk_stream_wait_connect() if sk_wait_event()
fails
- ipv6: revert remove expired routes with a separated list of routes
- wifi rfkill:
- set GPIO direction
- fix crash with WED rx support enabled
- bluetooth:
- fix deadlock in vhci_send_frame
- fix use-after-free in bt_sock_recvmsg
- eth: mlx5e: fix a race in command alloc flow
- eth: ice: fix PF with enabled XDP going no-carrier after reset
- eth: bnxt_en: do not map packet buffers twice
Previous releases - always broken:
- core:
- check vlan filter feature in vlan_vids_add_by_dev() and
vlan_vids_del_by_dev()
- check dev->gso_max_size in gso_features_check()
- mptcp: fix inconsistent state on fastopen race
- phy: skip LED triggers on PHYs on SFP modules
- eth: mlx5e:
- fix double free of encap_header
- fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()"
* tag 'net-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: check dev->gso_max_size in gso_features_check()
kselftest: rtnetlink.sh: use grep_fail when expecting the cmd fail
net/ipv6: Revert remove expired routes with a separated list of routes
net: avoid build bug in skb extension length calculation
net: ethernet: mtk_wed: fix possible NULL pointer dereference in mtk_wed_wo_queue_tx_clean()
net: stmmac: fix incorrect flag check in timestamp interrupt
selftests: add vlan hw filter tests
net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
net: hns3: add new maintainer for the HNS3 ethernet driver
net: mana: select PAGE_POOL
net: ks8851: Fix TX stall caused by TX buffer overrun
ice: Fix PF with enabled XDP going no-carrier after reset
ice: alter feature support check for SRIOV and LAG
ice: stop trashing VF VSI aggregator node ID information
mailmap: add entries for Geliang Tang
mptcp: fill in missing MODULE_DESCRIPTION()
mptcp: fix inconsistent state on fastopen race
selftests: mptcp: join: fix subflow_send_ack lookup
net: phy: skip LED triggers on PHYs on SFP modules
bpf: Add missing BPF_LINK_TYPE invocations
...
