Now that we have the MCU device-tree node, which acts as a GPIO
controller, add GPIO key node for the front button.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Turris Omnia's MCU provides various features that can be configured over
I2C at address 0x2a. Add device-tree node.
This does not carry a Fixes tag - we do not want this to get backported
to stable kernels for the following reason: U-Boot since v2022.10
inserts a phy-reset-gpio property into the WAN ethernet node pointing to
the MCU node if it finds the MCU node with a cznic,turris-omnia-mcu
compatible. Thus if this change got backported to a stable kernel, the
WAN interface driver would defer probe indefinitely (since it would wait
for the turris-omnia-mcu driver which would not be present).
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
stm32mp13-pinctrl.dtsi contains nearly all pinctrl groups collected from
all boards. Most of them end up unused by a board and only waste binary
space. Add /omit-if-no-ref/ to the groups to scrub the unused groups
from the dtbs.
Use the following regex to update the file and drop two useless newlines too:
s@^\t[^:]\+: [^ ]\+ {$@\t/omit-if-no-ref/\r&@
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The High Performance Direct Memory Access (HPDMA) controller is used to
perform programmable data transfers between memory-mapped peripherals
and memories (or between memories) via linked-lists.
There are 3 instances of HPDMA on stm32mp251, using stm32-dma3 driver, with
16 channels per instance and with one interrupt per channel.
Channels 0 to 7 are implemented with a FIFO of 8 bytes.
Channels 8 to 11 are implemented with a FIFO of 32 bytes.
Channels 12 to 15 are implemented with a FIFO of 128 bytes.
Thanks to stm32-dma3 bindings, the user can ask for a channel with specific
FIFO size.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add ethernet support for the DH STM32MP13xx DHCOR DHSBC carrier board.
This carrier board is populated with two gigabit ethernet ports and two
Realtek RTL8211F PHYs, both are described in this DT patch.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Ethernet1: RMII with crystal
Ethernet2: RMII with no cristal, need "phy-supply" property to work,
today this property was managed by Ethernet glue, but should be present
and managed in PHY node. So I will push second Ethernet in next step.
PHYs used are SMSC (LAN8742A)
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Those pins are used for Ethernet 1 and 2 on STM32MP13F-DK board.
ethernet1: RMII with crystal.
ethernet2: RMII without crystal.
Add analog gpio pin configuration ("sleep") to manage power mode on
stm32mp13.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
To simplify identifying the pins where the PWM output is routed to,
add a comment to each PWM device about the respective pin on the
expansion connector.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Bindings expect the LED node names to follow certain pattern, see
dtbs_check warnings:
orion5x-lswsgl.dtb: gpio-leds: led-alarm: Unevaluated properties are not allowed ('gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The 'gpio' property in GPIO LEDs is deprecated, as reported by
dtbs_check:
orion5x-lswsgl.dtb: gpio-leds: led-alarm: Unevaluated properties are not allowed ('gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys
is not a bus, see dtbs_check warnings:
orion5x-lacie-ethernet-disk-mini-v2.dtb: gpio-keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Bindings expect the GPIO key node names to follow certain pattern, see
dtbs_check warnings:
orion5x-lacie-d2-network.dtb: gpio-keys: 'front_button', 'power_rocker_sw_off', 'power_rocker_sw_on' do not match any of the regexes: '^(button|event|key|switch| ...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Bindings expect the LED node names to follow certain pattern, see
dtbs_check warnings:
kirkwood-ds409slim.dtb: gpio-leds-alarm-12: 'hdd1-green' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys
is not a bus, see dtbs_check warnings:
kirkwood-openblocks_a7.dtb: gpio_keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Bindings expect the GPIO key node names to follow certain pattern, see
dtbs_check warnings:
kirkwood-laplug.dtb: gpio_keys: 'power' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The marvell,mpic interrupt controller has no children nodes. Drop the
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The Allied Telesis x530 products have a 7-segment LED display which is
used for node identification when the devices are stacked. Represent
this as a gpio-7-segment device.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Turns out that this is not compiling anymore because the hid_bpf_ops
struct_ops definition had a change during the revisions.
Fixes: e342d6f6f7 ("HID: samples: convert the 2 HID-BPF samples into struct_ops")
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Compiling the GICv3 driver on arm32 with CONFIG_SMP disabled
(CONFIG_ACPI is not available) generates an unused variable warning for
'broken_rdists'. Add a __maybe_unused attribute to silence the compiler.
Fixes: d633da5d3a ("irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs")
Cc: <stable@vger.kernel.org> # .x
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Since commit 1fffe7a34c ("script: modpost: emit a warning when the
description is missing"), ARCH=x86 make allmodconfig && make W=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/serial/ch341.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/serial/usb_debug.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/serial/mxuport.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/serial/navman.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/serial/qcaux.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/serial/usb-serial-simple.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/serial/symbolserial.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
[ johan: amend commit message with commit introducing W=1 warning;
tweak some descriptions ]
Signed-off-by: Johan Hovold <johan@kernel.org>
'spcp8x5_usb_ctrl_arg' has been unused since the original
commit 619a6f1d14 ("USB: add usb-serial spcp8x5 driver").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Updates for v6.11
Core:
- SM7150 support
DPU:
- SM7150 support
- Fix DSC support for DSI panels in video mode
- Fixed TE vsync source support for DSI command-mode panels
- Fix for devices without UBWC in the display controller (ie.
QCM2290)
DSI:
- Remove unused register-writing wrappers
- Fix DSC support for panels in video mode
- Add support for parsing TE vsync source
- Add support for MSM8937 (28nm DSI PHY)
MDP5:
- Add support for MSM8937
- Fix configuration for MSM8953
GPU:
- Split giant device table into per-gen "hw catalog" similar to
what is done on the display side of the driver
- Fix a702 UBWC mode
- Fix unused variably warnings
- GPU memory traces
- Add param for userspace to know if raytracing is supported
- Memory barrier cleanup and GBIF unhalt fix
- X185 support (aka gpu in X1 laptop chips)
- a505 support
- fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvZQpYEHpSCgXGJ2kaHJDK6QFAFfTsfiWm4b2zZOnjXGw@mail.gmail.com
At this time, conntrack either returns NF_ACCEPT or NF_DROP.
To improve debuging it would be nice to be able to replace NF_DROP
verdict with NF_DROP_REASON() helper,
This helper releases the skb instantly (so drop_monitor can pinpoint
precise location) and returns NF_STOLEN.
Prepare call sites to deal with this before introducing such changes
in conntrack and nat core.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Aaron Conole <aconole@redhat.om>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without clock definition, SYSCFG will not work, EXTI interrupt for
port other than GPIOA will fail to operate.
Signed-off-by: Yanjun Yang <yangyj.ee@gmail.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This stm32mp135f-dhcor-dhsbc board is a stack of DHCOR SoM based on
STM32MP135F SoC (900MHz / crypto capabilities) populated on DHSBC
carrier board.
The SoM contains the following peripherals:
- STPMIC (power delivery)
- 512MB DDR3L memory
- eMMC and SDIO WiFi module
The DHSBC carrier board contains the following peripherals:
- Two RGMII Ethernet ports
- USB-A Host port, USB-C peripheral port, USB-C power supply plug
- Expansion connector
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Mediatek DRM Next for Linux 6.11
1. Convert to platform remove callback returning void
2. Drop chain_mode_fixup call in mode_valid()
3. Fixes the errors of MediaTek display driver found by IGT.
4. Add display support for the MT8365-EVK board
5. Fix bit depth overwritten for mtk_ovl_set bit_depth()
6. Remove less-than-zero comparison of an unsigned value
7. Call drm_atomic_helper_shutdown() at shutdown time
8. Log errors in probe with dev_err_probe()
9. Fix possible_crtcs calculation
10. Fix spurious kfree()
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628134632.28672-1-chunkuang.hu@kernel.org
