"tracing_map->next_elt" in get_free_elt() is at risk of overflowing.
Once it overflows, new elements can still be inserted into the tracing_map
even though the maximum number of elements (`max_elts`) has been reached.
Continuing to insert elements after the overflow could result in the
tracing_map containing "tracing_map->max_size" elements, leaving no empty
entries.
If any attempt is made to insert an element into a full tracing_map using
`__tracing_map_insert()`, it will cause an infinite loop with preemption
disabled, leading to a CPU hang problem.
Fix this by preventing any further increments to "tracing_map->next_elt"
once it reaches "tracing_map->max_elt".
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 08d43a5fa0 ("tracing: Add lock-free tracing_map")
Co-developed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Link: https://lore.kernel.org/20240805055922.6277-1-Tze-nan.Wu@mediatek.com
Signed-off-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit 77a06c33a2 ("eventfs: Test for ei->is_freed when accessing
ei->dentry") added another check, testing if the parent was freed after
we released the mutex. If so, the function returns NULL. However, all
callers expect it to either return a valid pointer or an error pointer,
at least since commit 5264a2f4bb ("tracing: Fix a NULL vs IS_ERR() bug
in event_subsystem_dir()"). Returning NULL will therefore fail the error
condition check in the caller.
Fix this by substituting the NULL return value with a fitting error
pointer.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Fixes: 77a06c33a2 ("eventfs: Test for ei->is_freed when accessing ei->dentry")
Link: https://lore.kernel.org/20240723122522.2724-1-minipli@grsecurity.net
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The effective SPI clock frequency should never exceed speed_hz
otherwise this might result in undefined behavior of the SPI device.
Currently the scldiv calculation could violate this constraint.
For the example parameters perclk_rate = 24 MHz and speed_hz = 7 MHz,
the function fsl_lpspi_set_bitrate will determine perscale = 0 and
scldiv = 1, which is a effective SPI clock of 8 MHz.
So fix this by rounding up the quotient of perclk_rate and speed_hz.
While this never change within the loop, we can pull this out.
Fixes: 5314987de5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240804113611.83613-1-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
We require this flag AMDGPU_GEM_CREATE_GFX12_DCC or any other
kernel level GFX12 DCC flag to differentiate the DCC buffers and other
pinned display buffers(which has TTM_PL_FLAG_CONTIGUOUS enabled).
If we use the TTM_PL_FLAG_CONTIGUOUS flag for DCC buffers, we may over
allocate for all the pinned display buffers unnecessarily that leads to
memory allocation failure.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 46142cc1b9)
Add address alignment support to the DCC VRAM buffers.
v2:
- adjust size based on the max_texture_channel_caches values
only for GFX12 DCC buffers.
- used AMDGPU_GEM_CREATE_GFX12_DCC flag to apply change only
for DCC buffers.
- roundup non power of two DCC buffer adjusted size to nearest
power of two number as the buddy allocator does not support non
power of two alignments. This applies only to the contiguous
DCC buffers.
v3:(Alex)
- rewrite the max texture channel caches comparison code in an
algorithmic way to determine the alignment size.
v4:(Alex)
- Move the logic from amdgpu_vram_mgr_dcc_alignment() to gmc_v12_0.c
and add a new gmc func callback for dcc alignment. If the callback
is non-NULL, call it to get the alignment, otherwise, use the default.
v5:(Alex)
- Set the Alignment to a default value if the callback doesn't exist.
- Add the callback to amdgpu_gmc_funcs.
v6:
- Fix checkpatch warning reported by Intel CI.
v7:(Christian)
- remove the AMDGPU_GEM_CREATE_GFX12_DCC flag and keep a flag that
checks the BO pinning and for a specific hw generation.
v8:(Christian)
- move this check into gmc_v12_0_get_dcc_alignment.
v9:
- Fix 32bit build errors
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit aa94b623cb)
Without setting cpv bit and 7th ib dw, non-dcc buffer copy will have
random corruption
So set the cpv bit and clear the 7th ib dw for copy non-dcc buffers
Signed-off-by: Frank Min <Frank.Min@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5aacf8917f)
- Add a new start parameter in trim function to specify exact
address from where to start the trimming. This would help us
in situations like if drivers would like to do address alignment
for specific requirements.
- Add a new flag DRM_BUDDY_TRIM_DISABLE. Drivers can use this
flag to disable the allocator trimming part. This patch enables
the drivers control trimming and they can do it themselves
based on the application requirements.
v1:(Matthew)
- check new_start alignment with min chunk_size
- use range_overflows()
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit db65eb46de)
The commit 5034b935f6 ("drm/amd/display: Modify DHCUB waterwark
structures and functions") introduced a code refactor for DCHUB, but
during the merge process into amd-staging-drm-next, the program det
segments were removed. This commit adds the DET segment programming for
DCN35.
Fixes: 5034b935f6 ("drm/amd/display: Modify DHCUB waterwark structures and functions")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 675d9ac9d0)
In the commit c2cec7a872b6 ("drm/amd/display: Wake DMCUB before sending
a command for replay feature"), replaced dm_execute_dmub_cmd with
dc_wake_and_execute_dmub_cmd in multiple areas, but due to merge issues
the replacement of this function in the dmub_replay_copy_settings was
missed. This commit replaces the old dm_execute_dmub_cmd with
dc_wake_and_execute_dmub_cmd.
Fixes: 3601a35a2e ("drm/amd/display: Wake DMCUB before sending a command for replay feature")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6cc213b9aa)
When eventfs was introduced, special care had to be done to coordinate the
freeing of the file meta data with the files that are exposed to user
space. The file meta data would have a ref count that is set when the file
is created and would be decremented and freed after the last user that
opened the file closed it. When the file meta data was to be freed, it
would set a flag (EVENT_FILE_FL_FREED) to denote that the file is freed,
and any new references made (like new opens or reads) would fail as it is
marked freed. This allowed other meta data to be freed after this flag was
set (under the event_mutex).
All the files that were dynamically created in the events directory had a
pointer to the file meta data and would call event_release() when the last
reference to the user space file was closed. This would be the time that it
is safe to free the file meta data.
A shortcut was made for the "format" file. It's i_private would point to
the "call" entry directly and not point to the file's meta data. This is
because all format files are the same for the same "call", so it was
thought there was no reason to differentiate them. The other files
maintain state (like the "enable", "trigger", etc). But this meant if the
file were to disappear, the "format" file would be unaware of it.
This caused a race that could be trigger via the user_events test (that
would create dynamic events and free them), and running a loop that would
read the user_events format files:
In one console run:
# cd tools/testing/selftests/user_events
# while true; do ./ftrace_test; done
And in another console run:
# cd /sys/kernel/tracing/
# while true; do cat events/user_events/__test_event/format; done 2>/dev/null
With KASAN memory checking, it would trigger a use-after-free bug report
(which was a real bug). This was because the format file was not checking
the file's meta data flag "EVENT_FILE_FL_FREED", so it would access the
event that the file meta data pointed to after the event was freed.
After inspection, there are other locations that were found to not check
the EVENT_FILE_FL_FREED flag when accessing the trace_event_file. Add a
new helper function: event_file_file() that will make sure that the
event_mutex is held, and will return NULL if the trace_event_file has the
EVENT_FILE_FL_FREED flag set. Have the first reference of the struct file
pointer use event_file_file() and check for NULL. Later uses can still use
the event_file_data() helper function if the event_mutex is still held and
was not released since the event_file_file() call.
Link: https://lore.kernel.org/all/20240719204701.1605950-1-minipli@grsecurity.net/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Ilkka Naulapää <digirigawa@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Alexey Makhalov <alexey.makhalov@broadcom.com>
Cc: Vasavi Sirnapalli <vasavi.sirnapalli@broadcom.com>
Link: https://lore.kernel.org/20240730110657.3b69d3c1@gandalf.local.home
Fixes: b63db58e2f ("eventfs/tracing: Add callback for release of an eventfs_inode")
Reported-by: Mathias Krause <minipli@grsecurity.net>
Tested-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If a send is issued marked with IOSQE_BUFFER_SELECT for selecting a
buffer, unless it's a bundle, it should not select multiple buffers.
Cc: stable@vger.kernel.org
Fixes: a05d1f625c ("io_uring/net: support bundles for send")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the iovec inside the kmsg isn't already allocated AND one gets
expanded beyond the fixed size, then the request may not already have
been marked for cleanup. Ensure that it is.
Cc: stable@vger.kernel.org
Fixes: a05d1f625c ("io_uring/net: support bundles for send")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the iovec inside the kmsg isn't already allocated AND one gets
expanded beyond the fixed size, then the request may not already have
been marked for cleanup. Ensure that it is.
Cc: stable@vger.kernel.org
Fixes: 2f9c9515bd ("io_uring/net: support bundles for recv")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This restores behaviour (including the comment) from now-removed
hci_request.c, and also matches existing code for active scanning.
Without this, the duplicates filter is always active when passive
scanning, which makes it impossible to work with devices that send
nontrivial dynamic data in their advertisement reports.
Fixes: abfeea476c ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY")
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that we call pwrseq_power_off() for all models that hold a valid
power sequencing handle, we can remove the switch case for QCA_6390. The
switch will now use the default label for this model but that's fine: if
it has the BT-enable GPIO than we should use it.
Fixes: eba1718717 ("Bluetooth: hci_qca: make pwrseq calls the default if available")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
A large tx latency issue was discovered during testing when only QBV was
enabled. The issue occurs because gtxoffset was not set when QBV is
active, it was only set when launch time is active.
The patch "igc: Correct the launchtime offset" only sets gtxoffset when
the launchtime_enable field is set by the user. Enabling launchtime_enable
ultimately sets the register IGC_TXQCTL_QUEUE_MODE_LAUNCHT (referred to as
LaunchT in the SW user manual).
Section 7.5.2.6 of the IGC i225/6 SW User Manual Rev 1.2.4 states:
"The latency between transmission scheduling (launch time) and the
time the packet is transmitted to the network is listed in Table 7-61."
However, the patch misinterprets the phrase "launch time" in that section
by assuming it specifically refers to the LaunchT register, whereas it
actually denotes the generic term for when a packet is released from the
internal buffer to the MAC transmit logic.
This launch time, as per that section, also implicitly refers to the QBV
gate open time, where a packet waits in the buffer for the QBV gate to
open. Therefore, latency applies whenever QBV is in use. TSN features such
as QBU and QAV reuse QBV, making the latency universal to TSN features.
Discussed with i226 HW owner (Shalev, Avi) and we were in agreement that
the term "launch time" used in Section 7.5.2.6 is not clear and can be
easily misinterpreted. Avi will update this section to:
"When TQAVCTRL.TRANSMIT_MODE = TSN, the latency between transmission
scheduling and the time the packet is transmitted to the network is listed
in Table 7-61."
Fix this issue by using igc_tsn_is_tx_mode_in_tsn() as a condition to
write to gtxoffset, aligning with the newly updated SW User Manual.
Tested:
1. Enrol taprio on talker board
base-time 0
cycle-time 1000000
flags 0x2
index 0 cmd S gatemask 0x1 interval1
index 0 cmd S gatemask 0x1 interval2
Note:
interval1 = interval for a 64 bytes packet to go through
interval2 = cycle-time - interval1
2. Take tcpdump on listener board
3. Use udp tai app on talker to send packets to listener
4. Check the timestamp on listener via wireshark
Test Result:
100 Mbps: 113 ~193 ns
1000 Mbps: 52 ~ 84 ns
2500 Mbps: 95 ~ 223 ns
Note that the test result is similar to the patch "igc: Correct the
launchtime offset".
Fixes: 790835fcc0 ("igc: Correct the launchtime offset")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Following the "igc: Fix TX Hang issue when QBV Gate is close" changes,
remaining issues with the reset adapter logic in igc_tsn_offload_apply()
have been observed:
1. The reset adapter logics for i225 and i226 differ, although they should
be the same according to the guidelines in I225/6 HW Design Section
7.5.2.1 on software initialization during tx mode changes.
2. The i225 resets adapter every time, even though tx mode doesn't change.
This occurs solely based on the condition igc_is_device_id_i225() when
calling schedule_work().
3. i226 doesn't reset adapter for tsn->legacy tx mode changes. It only
resets adapter for legacy->tsn tx mode transitions.
4. qbv_count introduced in the patch is actually not needed; in this
context, a non-zero value of qbv_count is used to indicate if tx mode
was unconditionally set to tsn in igc_tsn_enable_offload(). This could
be replaced by checking the existing register
IGC_TQAVCTRL_TRANSMIT_MODE_TSN bit.
This patch resolves all issues and enters schedule_work() to reset the
adapter only when changing tx mode. It also removes reliance on qbv_count.
qbv_count field will be removed in a future patch.
Test ran:
1. Verify reset adapter behaviour in i225/6:
a) Enrol a new GCL
Reset adapter observed (tx mode change legacy->tsn)
b) Enrol a new GCL without deleting qdisc
No reset adapter observed (tx mode remain tsn->tsn)
c) Delete qdisc
Reset adapter observed (tx mode change tsn->legacy)
2. Tested scenario from "igc: Fix TX Hang issue when QBV Gate is closed"
to confirm it remains resolved.
Fixes: 175c241288 ("igc: Fix TX Hang issue when QBV Gate is closed")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When user issues these cmds:
1. Either a) or b)
a) mqprio with hardware offload disabled
b) taprio with txtime-assist feature enabled
2. etf
3. tc qdisc delete
4. taprio with base time in the past
At step 4, qbv_config_change_errors wrongly increased by 1.
Excerpt from IEEE 802.1Q-2018 8.6.9.3.1:
"If AdminBaseTime specifies a time in the past, and the current schedule
is running, then: Increment ConfigChangeError counter"
qbv_config_change_errors should only increase if base time is in the past
and no taprio is active. In user perspective, taprio was not active when
first triggered at step 4. However, i225/6 reuses qbv for etf, so qbv is
enabled with a dummy schedule at step 2 where it enters
igc_tsn_enable_offload() and qbv_count got incremented to 1. At step 4, it
enters igc_tsn_enable_offload() again, qbv_count is incremented to 2.
Because taprio is running, tc_setup_type is TC_SETUP_QDISC_ETF and
qbv_count > 1, qbv_config_change_errors value got incremented.
This issue happens due to reliance on qbv_count field where a non-zero
value indicates that taprio is running. But qbv_count increases
regardless if taprio is triggered by user or by other tsn feature. It does
not align with qbv_config_change_errors expectation where it is only
concerned with taprio triggered by user.
Fixing this by relocating the qbv_config_change_errors logic to
igc_save_qbv_schedule(), eliminating reliance on qbv_count and its
inaccuracies from i225/6's multiple uses of qbv feature for other TSN
features.
The new function created: igc_tsn_is_taprio_activated_by_user() uses
taprio_offload_enable field to indicate that the current running taprio
was triggered by user, instead of triggered by non-qbv feature like etf.
Fixes: ae4fe46983 ("igc: Add qbv_config_change_errors counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Testing uncovered that even when the taprio gate is closed, some packets
still transmit.
According to i225/6 hardware errata [1], traffic might overflow the
planned QBV window. This happens because MAC maintains an internal buffer,
primarily for supporting half duplex retries. Therefore, even when the
gate closes, residual MAC data in the buffer may still transmit.
To mitigate this for i226, reduce the MAC's internal buffer from 192 bytes
to the recommended 88 bytes by modifying the RETX_CTL register value.
This follows guidelines from:
[1] Ethernet Controller I225/I22 Spec Update Rev 2.1 Errata Item 9:
TSN: Packet Transmission Might Cross Qbv Window
[2] I225/6 SW User Manual Rev 1.2.4: Section 8.11.5 Retry Buffer Control
Note that the RETX_CTL register can't be used in TSN mode because half
duplex feature cannot coexist with TSN.
Test Steps:
1. Send taprio cmd to board A:
tc qdisc replace dev enp1s0 parent root handle 100 taprio \
num_tc 4 \
map 3 2 1 0 3 3 3 3 3 3 3 3 3 3 3 3 \
queues 1@0 1@1 1@2 1@3 \
base-time 0 \
sched-entry S 0x07 500000 \
sched-entry S 0x0f 500000 \
flags 0x2 \
txtime-delay 0
Note that for TC3, gate should open for 500us and close for another
500us.
3. Take tcpdump log on Board B.
4. Send udp packets via UDP tai app from Board A to Board B.
5. Analyze tcpdump log via wireshark log on Board B. Ensure that the
total time from the first to the last packet received during one cycle
for TC3 does not exceed 500us.
Fixes: 4354621173 ("igc: Add new device ID's")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In case the guest doesn't have any LPI, we previously relied on the
iterator setting
'intid = nr_spis + VGIC_NR_PRIVATE_IRQS' && 'lpi_idx = 1'
to exit the iterator. But it was broken with commit 85d3ccc8b7 ("KVM:
arm64: vgic-debug: Use an xarray mark for debug iterator") -- the intid
remains at 'nr_spis + VGIC_NR_PRIVATE_IRQS - 1', and we end up endlessly
printing the last SPI's state.
Consider that it's meaningless to search the LPI xarray and populate
lpi_idx when there is no LPI, let's just skip the process for that case.
The result is that
* If there's no LPI, we focus on the intid and exit the iterator when it
runs out of the valid SPI range.
* Otherwise we keep the current logic and let the xarray drive the
iterator.
Fixes: 85d3ccc8b7 ("KVM: arm64: vgic-debug: Use an xarray mark for debug iterator")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240807052024.2084-1-yuzenghui@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
With the NV support of TLBI-range operations, KVM makes use of
instructions that are only supported by binutils versions >= 2.30.
This breaks the build for very old toolchains.
Make KVM support conditional on having ARMv8.4 support in the
assembler, side-stepping the issue.
Fixes: 5d476ca57d ("KVM: arm64: nv: Add handling of range-based TLBI operations")
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Suggested-by: Arnd Bergmann <arnd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240807115144.3237260-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The kernel can change spinlock behavior when running as a guest. But this
guest-friendly behavior causes performance problems on bare metal.
The kernel uses a static key to switch between the two modes.
In theory, the static key is enabled by default (run in guest mode) and
should be disabled for bare metal (and in some guests that want native
behavior or paravirt spinlock).
A performance drop is reported when running encode/decode workload and
BenchSEE cache sub-workload.
Bisect points to commit ce0a1b608b ("x86/paravirt: Silence unused
native_pv_lock_init() function warning"). When CONFIG_PARAVIRT_SPINLOCKS is
disabled the virt_spin_lock_key is incorrectly set to true on bare
metal. The qspinlock degenerates to test-and-set spinlock, which decreases
the performance on bare metal.
Set the default value of virt_spin_lock_key to false. If booting in a VM,
enable this key. Later during the VM initialization, if other
high-efficient spinlock is preferred (e.g. paravirt-spinlock), or the user
wants the native qspinlock (via nopvspin boot commandline), the
virt_spin_lock_key is disabled accordingly.
This results in the following decision matrix:
X86_FEATURE_HYPERVISOR Y Y Y N
CONFIG_PARAVIRT_SPINLOCKS Y Y N Y/N
PV spinlock Y N N Y/N
virt_spin_lock_key N Y/N Y N
Fixes: ce0a1b608b ("x86/paravirt: Silence unused native_pv_lock_init() function warning")
Reported-by: Prem Nath Dey <prem.nath.dey@intel.com>
Reported-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Suggested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Suggested-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240806112207.29792-1-yu.c.chen@intel.com
On a platform using the "Multiprocessor Wakeup Structure"[1] to startup
secondary CPUs the control processor needs to memremap() the physical
address of the MP Wakeup Structure mailbox to the variable
acpi_mp_wake_mailbox, which holds the virtual address of mailbox.
To wake up the AP the control processor writes the APIC ID of AP, the
wakeup vector and the ACPI_MP_WAKE_COMMAND_WAKEUP command into the mailbox.
Current implementation doesn't consider the case which restricts boot time
CPU bringup to 1 with the kernel parameter "maxcpus=1" and brings other
CPUs online later from user space as it sets acpi_mp_wake_mailbox to
read-only after init. So when the first AP is tried to brought online
after init, the attempt to update the variable results in a kernel panic.
The memremap() call that initializes the variable cannot be moved into
acpi_parse_mp_wake() because memremap() is not functional at that point in
the boot process. Also as the APs might never be brought up, keep the
memremap() call in acpi_wakeup_cpu() so that the operation only takes place
when needed.
Fixes: 24dd05da8c ("x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init")
Signed-off-by: Zhiquan Li <zhiquan1.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/all/20240805103531.1230635-1-zhiquan1.li@intel.com
To pick up changes from:
9ef54a3845 arm64: cputype: Add Cortex-A725 definitions
58d245e03c arm64: cputype: Add Cortex-X1C definitions
fd2ff5f0b3 arm64: cputype: Add Cortex-X925 definitions
add332c403 arm64: cputype: Add Cortex-A720 definitions
be5a6f2387 arm64: cputype: Add Cortex-X3 definitions
This should be used to beautify x86 syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up changes from:
149fd4712b perf/x86/intel: Support Perfmon MSRs aliasing
21b362cc76 x86/resctrl: Enable shared RMID mode on Sub-NUMA Cluster (SNC) systems
4f460bff7b cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h
7ea81936b8 x86/cpufeatures: Add HWP highest perf change feature flag
78ce84b9e0 x86/cpufeatures: Flip the /proc/cpuinfo appearance logic
1beb348d5c x86/sev: Provide SVSM discovery support
This should be used to beautify x86 syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up changes from:
0f9ca80fa4 fs: Add initial atomic write support info to statx
f9af549d1f fs: export mount options via statmount()
0a3deb1185 fs: Allow listmount() in foreign mount namespace
09b31295f8 fs: export the mount ns id via statmount
d04bccd8c1 listmount: allow listing in reverse order
bfc69fd05e fs/procfs: add build ID fetching to PROCMAP_QUERY API
ed5d583a88 fs/procfs: implement efficient VMA querying API for /proc/<pid>/maps
This should be used to beautify FS syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h
diff -u tools/perf/trace/beauty/include/uapi/linux/fs.h include/uapi/linux/fs.h
diff -u tools/perf/trace/beauty/include/uapi/linux/mount.h include/uapi/linux/mount.h
diff -u tools/perf/trace/beauty/include/uapi/linux/stat.h include/uapi/linux/stat.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up changes from:
d25a92ccae net/smc: Introduce IPPROTO_SMC
060f4ba6e4 io_uring/net: move charging socket out of zc io_uring
bb6aaf7366 net: Split a __sys_listen helper for io_uring
dc2e779794 net: Split a __sys_bind helper for io_uring
This should be used to beautify socket syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
And arch syscall tables to pick up changes from:
b1e31c134a powerpc: restore some missing spu syscalls
d3882564a7 syscalls: fix compat_sys_io_pgetevents_time64 usage
54233a4254 uretprobe: change syscall number, again
63ded11097 uprobe: Change uretprobe syscall scope and number
9142be9e64 x86/syscall: Mark exit[_group] syscall handlers __noreturn
9aae1baa1c x86, arm: Add missing license tag to syscall tables files
5c28424e9a syscalls: Fix to add sys_uretprobe to syscall.tbl
190fec72df uprobe: Wire up uretprobe system call
This should be used to beautify syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
