Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Fix a possible null-ptr-deref sometimes triggered by iptables-restore at
boot time. Register iptables {ipv4,ipv6} nat table pernet in first place
to fix this issue. Patch #1 and #2 from Kuniyuki Iwashima.
netfilter pull request 24-07-31
* tag 'nf-24-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().
netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().
====================
Link: https://patch.msgid.link/20240731213046.6194-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Following the implementation of "igc: Add TransmissionOverrun counter"
patch, when a taprio command is triggered by user, igc processes two
commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both
commands unconditionally pass through igc_tsn_offload_apply() which
evaluates and triggers reset adapter. The double reset causes issues in
the calculation of adapter->qbv_count in igc.
TAPRIO_CMD_REPLACE command is expected to reset the adapter since it
activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same
because it doesn't configure any driver-specific TSN settings. So, the
evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS.
To address this, commands parsing are relocated to
igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter
reset will exit after processing, thus avoiding igc_tsn_offload_apply().
Fixes: d3750076d4 ("igc: Add TransmissionOverrun counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240730173304.865479-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The carrier_lock spinlock protects the carrier detection. While it is
held, framer_get_status() is called which in turn takes a mutex.
This is not correct and can lead to a deadlock.
A run with PROVE_LOCKING enabled detected the issue:
[ BUG: Invalid wait context ]
...
c204ddbc (&framer->mutex){+.+.}-{3:3}, at: framer_get_status+0x40/0x78
other info that might help us debug this:
context-{4:4}
2 locks held by ifconfig/146:
#0: c0926a38 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x12c/0x664
#1: c2006a40 (&qmc_hdlc->carrier_lock){....}-{2:2}, at: qmc_hdlc_framer_set_carrier+0x30/0x98
Avoid the spinlock usage and convert carrier_lock to a mutex.
Fixes: 54762918ca ("net: wan: fsl_qmc_hdlc: Add framer support")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240730063104.179553-1-herve.codina@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit allocates a new modify header to replace the old
one when updating CT entry. But if failed to allocate a new one, eg.
exceed the max number firmware can support, modify header will be
an error pointer that will trigger a panic when deallocating it. And
the old modify header point is copied to old attr. When the old
attr is freed, the old modify header is lost.
Fix it by restoring the old attr to attr when failed to allocate a
new modify header context. So when the CT entry is freed, the right
modify header context will be freed. And the panic of accessing
error pointer is also fixed.
Fixes: 94ceffb48e ("net/mlx5e: Implement CT entry update")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Require mlx5 classifier action support when creating IPSec chains in
offload path. MLX5_IPSEC_CAP_PRIO should only be set if CONFIG_MLX5_CLS_ACT
is enabled. If CONFIG_MLX5_CLS_ACT=n and MLX5_IPSEC_CAP_PRIO is set,
configuring IPsec offload will fail due to the mlxx5 ipsec chain rules
failing to be created due to lack of classifier action support.
Fixes: fa5aa2f890 ("net/mlx5e: Use chains for IPsec policy priority offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2024-07-31
We've added 2 non-merge commits during the last 2 day(s) which contain
a total of 2 files changed, 2 insertions(+), 2 deletions(-).
The main changes are:
1) Fix BPF selftest build after tree sync with regards to a _GNU_SOURCE
macro redefined compilation error, from Stanislav Fomichev.
2) Fix a wrong test in the ASSERT_OK() check in uprobe_syscall BPF selftest,
from Jiri Olsa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/selftests: Fix ASSERT_OK condition check in uprobe_syscall test
selftests/bpf: Filter out _GNU_SOURCE when compiling test_cpp
====================
Link: https://patch.msgid.link/20240731115706.19677-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a buffer is evicted for memory pressure or TTM evict all,
the placement is set to the eviction domain, this means the
buffer never gets revalidated on the next exec to the correct domain.
I think this should be fine to use the initial domain from the
object creation, as least with VM_BIND this won't change after
init so this should be the correct answer.
Fixes: b88baab828 ("drm/nouveau: implement new VM_BIND uAPI")
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240515025542.2156774-1-airlied@gmail.com
Add the CLK_IGNORE_UNUSED flag to the vp-axi clock (CLK_VP_AXI) to avoid
depending on clk_ignore_unused in the cmdline. Without this fix, the
emmc-sdio clock (CLK_EMMC_SDIO) fails to work after vp-axi is disabled.
Signed-off-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20240731061439.3807172-1-drew@pdp7.com
Fixes: ae81b69fd2 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id],
but the function is exposed to user space before the entry is allocated
via register_pernet_subsys().
Let's call register_pernet_subsys() before xt_register_template().
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The Python finished() helper currently exits with KSFT_FAIL when there
are only passed and skipped tests. Fix the logic to exit with KSFT_PASS
instead, making it consistent with its C and bash counterparts
(ksft_finished() and ktap_finished() respectively).
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Fixes: dacf1d7a78 ("kselftest: Add test to verify probe of devices from discoverable buses")
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The abs-fuzz and abs-flat properties are documented as optional. When
these are absent, fwnode_property_read_u32() will leave the input
unchanged, meaning that an axis either picks up the value for the
previous axis or an uninitialized value.
Explicitly set these values to zero when they are unspecified to match
the documented behaviour in the device tree bindings.
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20240731093310.3696919-1-jkeeping@inmusicbrands.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The recent regression report revealed that the use of WC pages for AMD
HDMI device together with AMD IOMMU leads to unexpected truncation or
noises. The issue seems triggered by the change in the kernel core
memory allocation that enables IOMMU driver to use always S/G
buffers. Meanwhile, the use of WC pages has been a workaround for the
similar issue with standard pages in the past. So, now we need to
apply the workaround conditionally, namely, only when IOMMU isn't in
place.
This patch modifies the workaround code to check the DMA ops at first
and apply the snoop-off only when needed.
Fixes: f5ff79fddf ("dma-mapping: remove CONFIG_DMA_REMAP")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219087
Link: https://patch.msgid.link/20240731170521.31714-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David Laight pointed out that we should deal with the min3() and max3()
mess too, which still does excessive expansion.
And our current macros are actually rather broken.
In particular, the macros did this:
#define min3(x, y, z) min((typeof(x))min(x, y), z)
#define max3(x, y, z) max((typeof(x))max(x, y), z)
and that not only is a nested expansion of possibly very complex
arguments with all that involves, the typing with that "typeof()" cast
is completely wrong.
For example, imagine what happens in max3() if 'x' happens to be a
'unsigned char', but 'y' and 'z' are 'unsigned long'. The types are
compatible, and there's no warning - but the result is just random
garbage.
No, I don't think we've ever hit that issue in practice, but since we
now have sane infrastructure for doing this right, let's just use it.
It fixes any excessive expansion, and also avoids these kinds of broken
type issues.
Requested-by: David Laight <David.Laight@aculab.com>
Acked-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Linux-internal Xlinuxenvcfg ISA extension is omitted from the
riscv_isa_ext array because it has no DT binding and should not appear
in /proc/cpuinfo. The logic added in commit 625034abd5 ("riscv: add
ISA extensions validation callback") assumes all extensions are included
in riscv_isa_ext, and so riscv_resolve_isa() wrongly drops Xlinuxenvcfg
from the final ISA string. Instead, accept such Linux-internal ISA
extensions as if they have no validation callback.
Fixes: 625034abd5 ("riscv: add ISA extensions validation callback")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240718213011.2600150-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
shuffle few fields to reduce the holes within nvme_ns_head.
On x86_64, the size is reduced to 1104 bytes from 1120 bytes.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
pi_offset field is not required to be present in nvme_ns_head.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Since __va(0) does not translate to NULL anymore remove RELOC_HIDE()
which was only added to get rid of a compile warning with clang W=1:
arch/s390/mm/vmem.c:666:36: warning: performing pointer arithmetic on
a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
666 | __set_memory_4k(__va(0), __va(0) + ident_map_size);
| ~~~~~~~ ^
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use the sort() from lib/sort.c to sort markers instead of the private
implementation. The current implementation does not sort markers
properly if they have to be moved downwards:
---[ Real Memory Copy Area Start ]---
0x0000035b903ff000-0x0000035b90400000 4K PTE I
---[ vmalloc Area Start ]---
---[ Real Memory Copy Area End ]---
Add a new member to each marker which indicates if a marker is start
of an area. If addresses of areas are equal consider an address which
defines the start of an area higher than the address which defines the
end of an area. In result the output is sorted as intended:
---[ Real Memory Copy Area Start ]---
0x0000019cedcff000-0x0000019cedd00000 4K PTE I
---[ Real Memory Copy Area End ]---
---[ vmalloc Area Start ]---
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The page table dumper contains a hard coded assumption that the first
mapped area starts at address zero. With a relocated lowcore this is
not true anymore. Subsequently the first entry (lowcore) is printed as
if it would contain everything from address zero until the end of the
location of the lowcore area.
Fix this by adding a single "Kernel Virtual Address Space" entry,
which always starts at address zero. It ends when the lowcore area
starts which is either address zero, or its relocated address.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since virtual and real addresses are not the same anymore the
assumption that the kernel image is contained within the identity
mapping is also not true anymore.
Fix this by adding two explicit areas and at the correct locations: one
for the 8kb lowcore area, and one for the identity mapping.
Fixes: c98d2ecae0 ("s390/mm: Uncouple physical vs virtual address spaces")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove the unused and empty arch/s390/kernel/alternative.h header
file which was added by mistake.
Fixes: 5ade5be4ed ("s390: Add infrastructure to patch lowcore accesses")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With the recent rewrite of the fpu code exception handling for the
lfpc instruction within load_fpu_state() was erroneously removed.
Add it again to prevent that loading invalid floating point register
values cause an unhandled specification exception.
Fixes: 8c09871a95 ("s390/fpu: limit save and restore to used registers")
Cc: stable@vger.kernel.org
Reported-by: Aristeu Rozanski <aris@redhat.com>
Tested-by: Aristeu Rozanski <aris@redhat.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This driver is intended as a "client" end of the console connection.
When connected to a host it's supposed to receive debug logs, and
possibly allow to interact with whatever debug console is available
there. Feeding messages back, depending on a configuration may cause log
messages be executed as shell commands (which can be really bad if one
is unlucky, imagine a log message like "prevented running `rm -rf
/home`"). In case of Xen, it exposes sysrq-like debug interface, and
feeding it its own logs will pretty quickly hit 'R' for "instant
reboot".
Contrary to a classic serial console, the USB one cannot be configured
ahead of time, as the device shows up only when target OS is up. And at
the time device is opened to execute relevant ioctl, it's already too
late, especially when logs start flowing shortly after device is
initialized.
Avoid the issue by changing default to no echo for this type of devices.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
[ johan: amend summary; disable also ECHONL ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
RPN with 127:127 is treated as a Null RPN, just to reset the
parameters, and it's not translated to MIDI2. Although the current
code can work as is in most cases, better to implement the RPN reset
explicitly for Null message.
Link: https://patch.msgid.link/20240731130528.12600-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The UMP core conversion helper API already defines the context needed
to record the bank and RPN/NRPN values, and we can simply re-use the
same struct instead of re-defining the same content as a different
name.
Link: https://patch.msgid.link/20240731130528.12600-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
RPN with 127:127 is treated as a Null RPN, just to reset the
parameters, and it's not translated to MIDI2. Although the current
code can work as is in most cases, better to implement the RPN reset
explicitly for Null message.
Link: https://patch.msgid.link/20240731130528.12600-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
