Pull rpmsg updates from Bjorn Andersson:
- fix interrupt handling in the stm32 remoteproc driver when being
attached to an already running remote processor
- fix invalid kernel-doc and add missing MODULE_DESCRIPTION() in the
rpmsg char driver
* tag 'rpmsg-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: char: add missing MODULE_DESCRIPTION() macro
remoteproc: stm32_rproc: Fix mailbox interrupts queuing
rpmsg: char: Fix rpmsg_eptdev structure documentation
Pull remoteproc updates from Bjorn Andersson:
- The maximum amount of DDR memory used by the Mediatek MT8188/MT8195
SCP is increased to handle new use cases. Handling of optional L1TCM
memory is made actually optional.
- An optimization is introduced to only clear the unused portion of IPI
shared buffers, rather than the entire buffer before writing the
message.
- Detection for IPC-only mode in the TI K3 DSP remoteproc driver is
corrected. The loglevel of a debug print in the same is lowered from
error.
- Support for attaching to an running remote processor is added to the
Xilinx R5F.
- An in-kernel implementation of the Qualcomm "protected domain mapper"
(aka service registry) service is introduced, to remove the
dependency on a userspace implementation to detect when the battery
monitor and USB Type-C port manager becomes available. This is then
integrated with the Qualcomm remoteproc driver.
- The Qualcomm PAS remoteproc driver gains support for attempting to
bust hwspinlocks held by the remote processor when it
crashed/stopped.
- The TI OMAP remoteproc driver is transitioned to use devres helpers
for various forms of allocations.
- Parsing of memory-regions in the i.MX remoteproc driver is improved
to avoid a NULL pointer dereference if the phandle reference is
empty. of_node reference counting is corrected in the same.
* tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size
remoteproc: k3-dsp: Fix log levels where appropriate
remoteproc: xlnx: Add attach detach support
remoteproc: qcom: select AUXILIARY_BUS
remoteproc: k3-r5: Fix IPC-only mode detection
remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
remoteproc: qcom: enable in-kernel PD mapper
dt-bindings: remoteproc: imx_rproc: Add minItems for power-domain
remoteproc: imx_rproc: Fix refcount mistake in imx_rproc_addr_init
remoteproc: omap: Use devm_rproc_add() helper
remoteproc: omap: Use devm action to release reserved memory
remoteproc: omap: Use devm_rproc_alloc() helper
remoteproc: imx_rproc: Skip over memory region when node value is NULL
dt-bindings: remoteproc: k3-dsp: Correct optional sram properties for AM62A SoCs
remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
remoteproc: mediatek: Zero out only remaining bytes of IPI buffer
Pull hwspinlock updates from Bjorn Andersson:
"This introduces a mechanism in the hardware spinlock framework, and
the Qualcomm TCSR mutex driver, for allowing clients to bust locks
held by a remote processor in the event that this enters a faulty
state while holding the shared lock"
* tag 'hwlock-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
hwspinlock: qcom: implement bust operation
hwspinlock: Introduce hwspin_lock_bust()
Pull sh updates from John Paul Adrian Glaubitz:
"This is rather small this time and contains just three changes.
The first change by Oscar Salvador drops support for memory hotplug
and hotremove for sh as the kernel stopped supporting it on 32-bit
platforms since 7ec58a2b94 ("mm/memory_hotplug: restrict
CONFIG_MEMORY_HOTPLUG to 64 bit").
That then results in a follow-up change to update all affected board
config files.
The third change comes from Jeff Johnson which adds the missing
MODULE_DESCRIPTION() macro to the push-switch driver"
* tag 'sh-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: push-switch: Add missing MODULE_DESCRIPTION() macro
sh: config: Drop CONFIG_MEMORY_{HOTPLUG,HOTREMOVE}
sh: Drop support for memory hotplug and memory hotremove
Pull module update from Luis Chamberlain:
"This is a super boring development cycle this time around for modules,
there is only one patch in this pull request.
The patch deals with a corner case set of dependencies which is not
resolved today to ensure users get the module they need on initramfs.
Currently only one module is known to exist which needs this, however
this can grow to capture other corner cases likely escaped and not
reported before. The kernel change is just a section update, the real
work is done and merged already on upstream kmod.
This has been on linux-next for 3 weeks now"
* tag 'modules-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: create weak dependecies
Pull livepatching update from Petr Mladek:
- show patch->replace flag in sysfs
- add or improve few selftests
* tag 'livepatching-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Replace snprintf() with sysfs_emit()
selftests/livepatch: Add selftests for "replace" sysfs attribute
livepatch: Add "replace" sysfs attribute
selftests: livepatch: Test atomic replace against multiple modules
selftests/livepatch: define max test-syscall processes
Pull more i2c updates from Wolfram Sang:
"The I2C core has two header documentation updates as the dependecies
are in now.
The I2C host drivers add some patches which nearly fell through the
cracks:
- Added descriptions in the DTS for the Qualcomm SM8650 and SM8550
Camera Control Interface (CCI).
- Added support for the "settle-time-us" property, which allows the
gpio-mux device to switch from one bus to another with a
configurable delay. The time can be set in the DTS. The latest
change also includes file sorting.
- Fixed slot numbering in the SMBus framework to prevent failures
when more than 8 slots are occupied. It now enforces a a maximum of
8 slots to be used. This ensures that the Intel PIIX4 device can
register the SPDs correctly without failure, even if other slots
are populated but not used"
* tag 'i2c-for-6.11-rc1-second-batch' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: header: improve kdoc for i2c_algorithm
i2c: header: remove unneeded stuff regarding i2c_algorithm
i2c: piix4: Register SPDs
i2c: smbus: remove i801 assumptions from SPD probing
i2c: mux: gpio: Add support for the 'settle-time-us' property
i2c: mux: gpio: Re-order #include to match alphabetic order
dt-bindings: i2c: mux-gpio: Add 'settle-time-us' property
dt-bindings: i2c: qcom-cci: Document sm8650 compatible
dt-bindings: i2c: qcom-cci: Document sm8550 compatible
Pull PCMCIA updates from Dominik Brodowski:
"A number of tiny cleanups of the PCMCIA subsystem by Jeff Johnson,
Jules Irenge, and Krzysztof Kozlowski"
* tag 'pcmcia-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: add missing MODULE_DESCRIPTION() macros
pcmcia: Use resource_size function on resource object
pcmcia: bcm63xx: drop driver owner assignment
Pull HSI update from Sebastian Reichel:
- drop unused gpio.h header from SSI McSAAB protocol driver
* tag 'hsi-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: ssi_protocol: Remove unused linux/gpio.h
In this part of the documentation, $(CC) is meant, but gcc is written.
Signed-off-by: Ivan Davydov <davydoff33@yandex.ru>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Dan Carpenter reported a Smack static checker warning:
fs/smb/client/cifsfs.c:1981 init_cifs()
error: we previously assumed 'serverclose_wq' could be null (see line 1895)
The patch which introduced the serverclose workqueue used the wrong
oredering in error paths in init_cifs() for freeing it on errors.
Fixes: 173217bd73 ("smb3: retrying on failed server close")
Cc: stable@vger.kernel.org
Cc: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Howells <dhowell@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
glibc added support for .gnu.hash in 2006 and .hash has been obsoleted
for more than one decade in many Linux distributions. Using
--hash-style=sysv might imply unaddressed issues and confuse readers.
Just drop the option and rely on the linker default, which is likely
"both", or "gnu" when the distribution really wants to eliminate sysv
hash overhead.
Similar to commit 6b7e26547f ("x86/vdso: Emit a GNU hash").
Signed-off-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20240718173423.1574395-1-maskray@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Removing the CONFIG_PROTECTED_VIRTUALIZATION_GUEST ifdefs and config
option as well as CONFIG_KVM ifdefs in uv files.
Having this configurable has been more of a pain than a help.
It's time to remove the ifdefs and the config option.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Now that everything has been converted, add the option
'relocate_lowcore' to enable relocating the lowcore.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in store_status()
and __do_machine_kdump().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in system_call().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in ret_from_fork().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in __switch_to().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in restart_int_handler().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in mcck_int_handler().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in the ext/io interrupt
handlers.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in pgm_check_handler().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of having lowcore at different address than zero,
add the base register to CHECK_VMAP_STACK and CHECK_STACK. No
functional change, because %r0 is passed to the macro.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of having lowcore at different address than zero,
add the base register to SIEEXIT. No functional change, because
%r0 is passed to the macro.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of having lowcore at different address than zero,
add the base register to MBEAR. No functional change, because
%r0 is passed to the macro.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in __sie64a().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in startup_continue().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The s390 architecture defines two special per-CPU data pages
called the "prefix area". In s390-linux terminology this is usually
called "lowcore". This memory area contains system configuration
data like old/new PSW's for system call/interrupt/machine check
handlers and lots of other data. It is normally mapped to logical
address 0. This area can only be accessed when in supervisor mode.
This means that kernel code can dereference NULL pointers, because
accesses to address 0 are allowed. Parts of lowcore can be write
protected, but read accesses and write accesses outside of the write
protected areas are not caught.
To remove this limitation for debugging and testing, remap lowcore to
another address and define a function get_lowcore() which simply
returns the address where lowcore is mapped at. This would normally
introduce a pointer dereference (=memory read). As lowcore is used
for several very often used variables, add code to patch this function
during runtime, so we avoid the memory reads.
For C code get_lowcore() has to be used, for assembly code it is
the GET_LC macro. When using this macro/function a reference is added
to alternative patching. All these locations will be patched to the
actual lowcore location when the kernel is booted or a module is loaded.
To make debugging/bisecting problems easier, this patch adds all the
infrastructure but the lowcore address is still hardwired to 0. This
way the code can be converted on a per function basis, and the
functionality is enabled in a patch after all the functions have
been converted.
Note that this requires at least z16 because the old lpsw instruction
only allowed a 12 bit displacement. z16 introduced lpswey which allows
20 bits (signed), so the lowcore can effectively be mapped from
address 0 - 0x7e000. To use 0x7e000 as address, a 6 byte lgfi
instruction would have to be used in the alternative. To save two
bytes, llilh can be used, but this only allows to set bits 16-31 of
the address. In order to use the llilh instruction, use 0x70000 as
alternative lowcore address. This is still large enough to catch
NULL pointer dereferences into large arrays.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
CIF_SIE indicates if a thread is running in SIE context. This is the
state of a thread and not the CPU. Therefore move this indicator to
thread info.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The low level machine check handler code fills the ptregs structure
partially with the register contents present at machine check handler
entry and partially with contents from the machine check save area.
In case of a machine check the contents of all general purpose
registers are saved by the CPU to the machine check save area.
Therefore simplify the code and fill the ptregs structure by only
using the machine check save area as source.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The alternative and the normal facility list are always identical. Remove
the alternative facility list, which allows to simplify the alternatives
code.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The nospec implementation is deeply integrated into the alternatives
code: only for nospec an alternative facility list is implemented and
used by the alternative code, while it is modified by nospec specific
needs.
Push down the nospec alternative handling into the nospec by
introducing a new alternative type and a specific nospec callback to
decide if alternatives should be applied.
Also introduce a new global nobp variable which together with facility
82 can be used to decide if nobp is enabled or not.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add the required code to patch alternatives early in the decompressor.
This is required for the upcoming lowcore relocation changes, where
alternatives for facility 193 need to get patched before lowcore
alternatives.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Co-developed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Rework alternatives to allow for callbacks. With this every
alternative entry has additional data encoded:
- When (aka context) an alternative is supposed to be applied
- The type of an alternative, which allows for type specific handling
and callbacks
- Extra type specific payload (patch information), which can be passed
to callbacks in order to decide if an alternative should be applied
or not
With this only the "late" context is implemented, which means there is
no change to the previous behaviour. All code is just converted to the
more generic new infrastructure.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
To avoid lots of ifdefs in C code make s390_kernel_write() usable for
the decompressor: simply use memcpy() for this case since there is no
write protection enabled that early.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Move all text sync functions from alternative.c to processor.c. This
way there is only minimal code left in alternative.c left, which is a
prerequisite to use the C file within boot code as well.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The two alternative header files must stay in sync. This is easier to
achieve within one header file. Therefore merge both of them and have
only one file, like most other architectures.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The alternative code is using the words facility and feature for the
same. Rename facility to more generic feature everywhere to have
consistent naming.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
