On some pre-production hardware, the SoCs do not contain calibration
data for the thermal sensors. The downstream drivers provide default
values that sort of work, instead of having the thermal sensors not
work at all.
Port the default values to the upstream driver. These values are from
the ChromeOS kernels, which sadly do not cover the MT7988.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240620092306.2352606-1-wenst@chromium.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Fix thermal zone names for consistency with the other SoCs:
- GPU0 must be used as the first GPU item.
- SOCx deal with audio DSP, video, and infra subsystems.
The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.
The definitions can be safely modified here because they are used only
in the LVTS driver, which is modified accordingly, and have not yet
been included in a released kernel.
Fixes: 78c88534e5 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8188")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-2-8c8e3c7a3643@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Fix a thermal zone name for consistency with the other SoCs:
MFG contains GPU, the latter is more specific and must be used here.
The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.
The definition can be safely modified here because it is used only
in the LVTS driver, which is modified accordingly, and has not yet
been included in a released kernel.
Fixes: a2ca202350 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8186")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-1-8c8e3c7a3643@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This add suspend-to-ram support.
The derived_table is kept-as is, so the resume is only about
pm_runtime_* calls and restoring the same registers as the probe.
Extract the hardware initialization procedure to a function called at
both probe-time & resume-time.
The probe-time loop is split in two to ensure doing the hardware
initialization before registering thermal zones. That ensures our
callbacks cannot be called while in bad state.
The 100ms delay in the hardware initialization sequence was removed.
It was initially added to be sure the thresholds are programmed before
enabling the interrupt, but in fact it's not needed (tested on J7200
platform).
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Acked-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* ras/edac-amd-atl:
RAS/AMD/FMPM: Use atl internal.h for INVALID_SPA
RAS/AMD/ATL: Implement DF 4.5 NP2 denormalization
RAS/AMD/ATL: Validate address map when information is gathered
RAS/AMD/ATL: Expand helpers for adding and removing base and hole
RAS/AMD/ATL: Read DRAM hole base early
RAS/AMD/ATL: Add amd_atl pr_fmt() prefix
RAS/AMD/ATL: Add a missing module description
* ras/edac-misc:
EDAC: Add missing MODULE_DESCRIPTION() macros
EDAC/dmc520: Use devm_platform_ioremap_resource()
EDAC/igen6: Add Intel Arrow Lake-U/H SoCs support
EDAC, i10nm: make skx_common.o a separate module
EDAC/skx: Switch to new Intel CPU model defines
EDAC/sb_edac: Switch to new Intel CPU model defines
EDAC, pnd2: Switch to new Intel CPU model defines
EDAC/i10nm: Switch to new Intel CPU model defines
EDAC/ghes: Add missing newline to pr_info() statement
RAS/AMD/ATL: Add missing newline to pr_info() statement
EDAC/thunderx: Remove unused struct error_syndrome
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
commit 21c690a349 ("mm: introduce slabobj_ext to support slab object
extensions") changed the folio/page->memcg_data define condition from
MEMCG to SLAB_OBJ_EXT. This action make memcg_data exposed while !MEMCG.
As Vlastimil Babka suggested, let's add _unused_slab_obj_exts for
SLAB_MATCH for slab.obj_exts while !MEMCG. That could resolve the match
issue, clean up the feature logical.
Signed-off-by: Alex Shi (Tencent) <alexs@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yoann Congal <yoann.congal@smile.fr>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The newly added driver causes a Kconfig warning:
WARNING: unmet direct dependencies detected for RTC_CLASS
Depends on [n]: !S390 [=y]
Selected by [m]:
- TURRIS_OMNIA_MCU [=m] && CZNIC_PLATFORMS [=y] && (MACH_ARMADA_38X || COMPILE_TEST [=y]) && I2C [=m] && OF [=y] && WATCHDOG [=y]
The problem here is that it selects entire subsystems, which normal
device drivers should not do. Changes all of these to 'depends on'
instead.
Fixes: dfa556e45a ("platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs")
Fixes: 90e700fd12 ("platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup")
Fixes: ab89fb5fb9 ("platform: cznic: turris-omnia-mcu: Add support for MCU watchdog")
Fixes: 41bb142a40 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To ensure non-reentrancy, __queue_work() attempts to enqueue a work
item to the pool of the currently executing worker. This is not only
unnecessary for an ordered workqueue, where order inherently suggests
non-reentrancy, but it could also disrupt the sequence if the item is
not enqueued on the newest PWQ.
Just queue it to the newest PWQ and let order management guarantees
non-reentrancy.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Fixes: 4c065dbce1 ("workqueue: Enable unbound cpumask update on ordered workqueues")
Cc: stable@vger.kernel.org # v6.9+
Signed-off-by: Tejun Heo <tj@kernel.org>
(cherry picked from commit 74347be3edfd11277799242766edf844c43dd5d3)
If the driver uses a page pool, it creates a page pool with
page_pool_create().
The reference count of page pool is 1 as default.
A page pool will be destroyed only when a reference count reaches 0.
page_pool_destroy() is used to destroy page pool, it decreases a
reference count.
When a page pool is destroyed, ->disconnect() is called, which is
mem_allocator_disconnect().
This function internally acquires mutex_lock().
If the driver uses XDP, it registers a memory model with
xdp_rxq_info_reg_mem_model().
The xdp_rxq_info_reg_mem_model() internally increases a page pool
reference count if a memory model is a page pool.
Now the reference count is 2.
To destroy a page pool, the driver should call both page_pool_destroy()
and xdp_unreg_mem_model().
The xdp_unreg_mem_model() internally calls page_pool_destroy().
Only page_pool_destroy() decreases a reference count.
If a driver calls page_pool_destroy() then xdp_unreg_mem_model(), we
will face an invalid wait context warning.
Because xdp_unreg_mem_model() calls page_pool_destroy() with
rcu_read_lock().
The page_pool_destroy() internally acquires mutex_lock().
Splat looks like:
=============================
[ BUG: Invalid wait context ]
6.10.0-rc6+ #4 Tainted: G W
-----------------------------
ethtool/1806 is trying to lock:
ffffffff90387b90 (mem_id_lock){+.+.}-{4:4}, at: mem_allocator_disconnect+0x73/0x150
other info that might help us debug this:
context-{5:5}
3 locks held by ethtool/1806:
stack backtrace:
CPU: 0 PID: 1806 Comm: ethtool Tainted: G W 6.10.0-rc6+ #4 f916f41f172891c800f2fed
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
__lock_acquire+0x1681/0x4de0
? _printk+0x64/0xe0
? __pfx_mark_lock.part.0+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
lock_acquire+0x1b3/0x580
? mem_allocator_disconnect+0x73/0x150
? __wake_up_klogd.part.0+0x16/0xc0
? __pfx_lock_acquire+0x10/0x10
? dump_stack_lvl+0x91/0xc0
__mutex_lock+0x15c/0x1690
? mem_allocator_disconnect+0x73/0x150
? __pfx_prb_read_valid+0x10/0x10
? mem_allocator_disconnect+0x73/0x150
? __pfx_llist_add_batch+0x10/0x10
? console_unlock+0x193/0x1b0
? lockdep_hardirqs_on+0xbe/0x140
? __pfx___mutex_lock+0x10/0x10
? tick_nohz_tick_stopped+0x16/0x90
? __irq_work_queue_local+0x1e5/0x330
? irq_work_queue+0x39/0x50
? __wake_up_klogd.part.0+0x79/0xc0
? mem_allocator_disconnect+0x73/0x150
mem_allocator_disconnect+0x73/0x150
? __pfx_mem_allocator_disconnect+0x10/0x10
? mark_held_locks+0xa5/0xf0
? rcu_is_watching+0x11/0xb0
page_pool_release+0x36e/0x6d0
page_pool_destroy+0xd7/0x440
xdp_unreg_mem_model+0x1a7/0x2a0
? __pfx_xdp_unreg_mem_model+0x10/0x10
? kfree+0x125/0x370
? bnxt_free_ring.isra.0+0x2eb/0x500
? bnxt_free_mem+0x5ac/0x2500
xdp_rxq_info_unreg+0x4a/0xd0
bnxt_free_mem+0x1356/0x2500
bnxt_close_nic+0xf0/0x3b0
? __pfx_bnxt_close_nic+0x10/0x10
? ethnl_parse_bit+0x2c6/0x6d0
? __pfx___nla_validate_parse+0x10/0x10
? __pfx_ethnl_parse_bit+0x10/0x10
bnxt_set_features+0x2a8/0x3e0
__netdev_update_features+0x4dc/0x1370
? ethnl_parse_bitset+0x4ff/0x750
? __pfx_ethnl_parse_bitset+0x10/0x10
? __pfx___netdev_update_features+0x10/0x10
? mark_held_locks+0xa5/0xf0
? _raw_spin_unlock_irqrestore+0x42/0x70
? __pm_runtime_resume+0x7d/0x110
ethnl_set_features+0x32d/0xa20
To fix this problem, it uses rhashtable_lookup_fast() instead of
rhashtable_lookup() with rcu_read_lock().
Using xa without rcu_read_lock() here is safe.
xa is freed by __xdp_mem_allocator_rcu_free() and this is called by
call_rcu() of mem_xa_remove().
The mem_xa_remove() is called by page_pool_destroy() if a reference
count reaches 0.
The xa is already protected by the reference count mechanism well in the
control plane.
So removing rcu_read_lock() for page_pool_destroy() is safe.
Fixes: c3f812cea0 ("page_pool: do not release pool until inflight == 0.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240712095116.3801586-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the commit bdacf3e349 ("net: Use nested-BH locking for
napi_alloc_cache.") was merged, the following warning began to appear:
WARNING: CPU: 5 PID: 1 at net/core/skbuff.c:1451 napi_skb_cache_put+0x82/0x4b0
__warn+0x12f/0x340
napi_skb_cache_put+0x82/0x4b0
napi_skb_cache_put+0x82/0x4b0
report_bug+0x165/0x370
handle_bug+0x3d/0x80
exc_invalid_op+0x1a/0x50
asm_exc_invalid_op+0x1a/0x20
__free_old_xmit+0x1c8/0x510
napi_skb_cache_put+0x82/0x4b0
__free_old_xmit+0x1c8/0x510
__free_old_xmit+0x1c8/0x510
__pfx___free_old_xmit+0x10/0x10
The issue arises because virtio is assuming it's running in NAPI context
even when it's not, such as in the netpoll case.
To resolve this, modify virtnet_poll_tx() to only set NAPI when budget
is available. Same for virtnet_poll_cleantx(), which always assumed that
it was in a NAPI context.
Fixes: df133f3f96 ("virtio_net: bulk free tx skbs")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Link: https://patch.msgid.link/20240712115325.54175-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kamil Horák says:
====================
net: phy: bcm5481x: add support for BroadR-Reach mode
PATCH 1 - Add the 10baseT1BRR_Full link mode
PATCH 2 - Add the definitions of LRE registers, necessary to use
BroadR-Reach modes on the BCM5481x PHY
PATCH 3 - Add brr-mode flag to switch between IEEE802.3 and BroadR-Reach
PATCH 4 - Implementation of the BroadR-Reach modes for the Broadcom
PHYs
====================
Link: https://patch.msgid.link/20240712150709.3134474-1-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement single-pair BroadR-Reach modes on bcm5481x PHY by Broadcom.
Create set of functions alternative to IEEE 802.3 to handle
configuration of these modes on compatible Broadcom PHYs.
There is only subset of capabilities supported because of limited
collection of hardware available for the development.
For BroadR-Reach capable PHYs, the LRE (Long Reach Ethernet)
alternative register set is handled. Only bcm54811 PHY is verified,
for bcm54810, there is some support possible but untested. There
is no auto-negotiation of the link parameters (called LDS in the
Broadcom terminology, Long-Distance Signaling) for bcm54811.
It should be possible to enable LDS for bcm54810.
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240712150709.3134474-5-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a group of PHY chips supporting BroadR-Reach link modes in
a manner allowing for more or less identical register usage as standard
Clause 22 PHY.
These chips support standard Ethernet link modes as well, however, the
circuitry is mutually exclusive and cannot be auto-detected.
The link modes in question are 100Base-T1 as defined in IEEE802.3bw,
based on Broadcom's 1BR-100 link mode, and newly defined 10Base-T1BRR
(1BR-10 in Broadcom documents).
Add optional brr-mode flag to switch the PHY to BroadR-Reach mode.
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240712150709.3134474-4-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a new link mode necessary for 10 MBit single-pair
connection in BroadR-Reach mode on bcm5481x PHY by Broadcom.
This new link mode, 10baseT1BRR, is known as 1BR10 in the Broadcom
terminology. Another link mode to be used is 1BR100 and it is already
present as 100baseT1, because Broadcom's 1BR100 became 100baseT1
(IEEE 802.3bw).
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240712150709.3134474-2-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xuan Zhuo says:
====================
virtio-net: support AF_XDP zero copy
v5: http://lore.kernel.org/all/20240611114147.31320-1-xuanzhuo@linux.alibaba.com
XDP socket(AF_XDP) is an excellent bypass kernel network framework. The zero
copy feature of xsk (XDP socket) needs to be supported by the driver. The
performance of zero copy is very good. mlx5 and intel ixgbe already support
this feature, This patch set allows virtio-net to support xsk's zerocopy xmit
feature.
At present, we have completed some preparation:
1. vq-reset (virtio spec and kernel code)
2. virtio-core premapped dma
3. virtio-net xdp refactor
So it is time for Virtio-Net to complete the support for the XDP Socket
Zerocopy.
Virtio-net can not increase the queue num at will, so xsk shares the queue with
kernel.
On the other hand, Virtio-Net does not support generate interrupt from driver
manually, so when we wakeup tx xmit, we used some tips. If the CPU run by TX
NAPI last time is other CPUs, use IPI to wake up NAPI on the remote CPU. If it
is also the local CPU, then we wake up napi directly.
This patch set includes some refactor to the virtio-net to let that to support
AF_XDP.
Because there are too many commits, the work of virtio net supporting af-xdp is
split to rx part and tx part. This patch set is for rx part.
So the flag NETDEV_XDP_ACT_XSK_ZEROCOPY is not added, if someone want to test
for af-xdp rx, the flag needs to be adding locally.
ENV: Qemu with vhost-user(polling mode).
Host CPU: Intel(R) Xeon(R) Platinum 8163 CPU @ 2.50GHz
testpmd> show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 19531092064 RX-missed: 0 RX-bytes: 1093741155584
RX-errors: 0
RX-nombuf: 0
TX-packets: 5959955552 TX-errors: 0 TX-bytes: 371030645664
Throughput (since last show)
Rx-pps: 8861574 Rx-bps: 3969985208
Tx-pps: 8861493 Tx-bps: 3969962736
############################################################################
testpmd> show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 68152727 RX-missed: 0 RX-bytes: 3816552712
RX-errors: 0
RX-nombuf: 0
TX-packets: 68114967 TX-errors: 33216 TX-bytes: 3814438152
Throughput (since last show)
Rx-pps: 6333196 Rx-bps: 2837272088
Tx-pps: 6333227 Tx-bps: 2837285936
############################################################################
But AF_XDP consumes more CPU for tx and rx napi(100% and 86%).
====================
Link: https://patch.msgid.link/20240708112537.96291-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the process:
1. We may need to copy data to create skb for XDP_PASS.
2. We may need to call xsk_buff_free() to release the buffer.
3. The handle for xdp_buff is difference from the buffer.
If we pushed this logic into existing receive handle(merge and small),
we would have to maintain code scattered inside merge and small (and big).
So I think it is a good choice for us to put the xsk code into an
independent function.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240708112537.96291-10-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The issue initially stems from libpcap. The ethertype will be overwritten
as the VLAN TPID if the network interface lacks hardware VLAN offloading.
In the outbound packet path, if hardware VLAN offloading is unavailable,
the VLAN tag is inserted into the payload but then cleared from the sk_buff
struct. Consequently, this can lead to a false negative when checking for
the presence of a VLAN tag, causing the packet sniffing outcome to lack
VLAN tag information (i.e., TCI-TPID). As a result, the packet capturing
tool may be unable to parse packets as expected.
The TCI-TPID is missing because the prb_fill_vlan_info() function does not
modify the tp_vlan_tci/tp_vlan_tpid values, as the information is in the
payload and not in the sk_buff struct. The skb_vlan_tag_present() function
only checks vlan_all in the sk_buff struct. In cooked mode, the L2 header
is stripped, preventing the packet capturing tool from determining the
correct TCI-TPID value. Additionally, the protocol in SLL is incorrect,
which means the packet capturing tool cannot parse the L3 header correctly.
Link: https://github.com/the-tcpdump-group/libpcap/issues/1105
Link: https://lore.kernel.org/netdev/20240520070348.26725-1-chengen.du@canonical.com/T/#u
Fixes: 393e52e33c ("packet: deliver VLAN TCI to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Chengen Du <chengen.du@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240713114735.62360-1-chengen.du@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean says:
====================
Eliminate CONFIG_NR_CPUS dependency in dpaa-eth and enable COMPILE_TEST in fsl_qbman
Breno's previous attempt at enabling COMPILE_TEST for the fsl_qbman
driver (now included here as patch 5/5) triggered compilation warnings
for large CONFIG_NR_CPUS values:
https://lore.kernel.org/all/202406261920.l5pzM1rj-lkp@intel.com/
Patch 1/5 switches two NR_CPUS arrays in the dpaa-eth driver to dynamic
allocation to avoid that warning. There is more NR_CPUS usage in the
fsl-qbman driver, but that looks relatively harmless and I couldn't find
a good reason to change it.
I noticed, while testing, that the driver doesn't actually work properly
with high CONFIG_NR_CPUS values, and patch 2/5 addresses that.
During code analysis, I have identified two places which treat
conditions that can never happen. Patches 3/5 and 4/5 simplify the
probing code - dpaa_fq_setup() - just a little bit.
Finally we have at 5/5 the patch that triggered all of this. There is
an okay from Herbert to take it via netdev, despite it being on soc/qbman:
https://lore.kernel.org/all/Zns%2FeVVBc7pdv0yM@gondor.apana.org.au/
Link to v1:
https://lore.kernel.org/netdev/20240710230025.46487-1-vladimir.oltean@nxp.com/
====================
Link: https://patch.msgid.link/20240713225336.1746343-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dpaa_fq_setup() iterates through the &priv->dpaa_fq_list elements
allocated by dpaa_alloc_all_fqs(). This includes a call to:
if (!dpaa_fq_alloc(dev, 0, dpaa_max_num_txqs(), list, FQ_TYPE_TX))
goto fq_alloc_failed;
which gives us dpaa_max_num_txqs() elements of FQ_TYPE_TX type.
The code block which we are deleting runs after an earlier iteration
through &priv->dpaa_fq_list. So at the end of this iteration (for which
there is no early break), egress_cnt will be unconditionally equal to
dpaa_max_num_txqs().
In other words, dpaa_alloc_all_fqs() has already allocated TX queues for
all possible CPUs and the maximal number of traffic classes, and we've
already iterated once through them all.
The while() condition is dead code, remove it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20240713225336.1746343-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dpaa_fq_setup() iterates through the queues allocated by dpaa_alloc_all_fqs()
and saved in &priv->dpaa_fq_list.
The allocation for FQ_TYPE_TX looks as follows:
if (!dpaa_fq_alloc(dev, 0, dpaa_max_num_txqs(), list, FQ_TYPE_TX))
goto fq_alloc_failed;
Thus, iterating again through FQ_TYPE_TX queues in dpaa_fq_setup() and
counting them will never yield an egress_cnt larger than the allocated
size, dpaa_max_num_txqs().
The comparison serves no purpose since it is always true; remove it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20240713225336.1746343-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
