This implements the runtime constant infrastructure for arm64, allowing
the dcache d_hash() function to be generated using as a constant for
hash table address followed by shift by a constant of the hash index.
[ Fixed up to deal with the big-endian case as per Mark Rutland ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2024-07-09
The following pull-request contains BPF updates for your *net* tree.
We've added 3 non-merge commits during the last 1 day(s) which contain
a total of 5 files changed, 81 insertions(+), 11 deletions(-).
The main changes are:
1) Fix a use-after-free in a corner case where tcx_entry got released too
early. Also add BPF test coverage along with the fix, from Daniel Borkmann.
2) Fix a kernel panic on Loongarch in sk_msg_recvmsg() which got triggered
by running BPF sockmap selftests, from Geliang Tang.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
skmsg: Skip zero length skb in sk_msg_recvmsg
selftests/bpf: Extend tcx tests to cover late tcx_entry release
bpf: Fix too early release of tcx_entry
====================
Link: https://patch.msgid.link/20240709091452.27840-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When platform firmware exposes multiple supported bus frequencies, the
existing SoundWire support selects the maximum frequency. This is not
aligned with the SoundWire 1.2 directions: the MIPI recommendation is
to start at a 'safe' speed, compatible with the default frame rate and
shape, and only increase the clock when vendor and codec PHY
parameters are updated.
However, clock changes are not supported for now by the SoundWire
core, so in practice this patch has the effect of discarding
frequencies different to the implicit default. Dynamic clock changes
will be required at some point, and this limitation will be removed
after the core is updated, specifically to perform synchronous clock
scale changes on manager and peripheral sides with a bank switch.
On Intel LunarLake platforms with a 'standard' DSDT, this forces the
use of 4.8MHz. On older platforms this patch has no effect.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240704003411.10347-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
ls1028a has a reset module that includes reboot, reset control word, and
service processor control.
Add platform specific compatible string to fix the below warning.
syscon@1e60000: compatible: 'anyOf' conditional failed, one must be fixed:
['syscon'] is too short
'syscon' is not one of ['al,alpine-sysfabric-service', ...]
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240703-ls_reset_syscon-v1-1-338f41b3902d@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert binding doc qe.txt to yaml format. Split it to
fsl,qe-firmware.yaml, fsl,qe-ic.yaml, fsl,qe-muram.yaml, fsl,qe-si.yaml
fsl,qe-siram.yaml, fsl,qe.yaml.
Additional Changes:
- Fix error in example.
- Change to low case for hex value.
- Remove fsl,qe-num-riscs and fsl,qe-snums from required list.
- Add #address-cell and #size-cell.
- Add interrupts description for qe-ic.
- Add compatible string fsl,ls1043-qe-si for fsl,qe-si.yaml
- Add compatible string fsl,ls1043-qe-siram for fsl,qe-siram.yaml
- Add child node for fsl,qe.yaml
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000: failed to match any schema with compatible: ['fsl,qe-muram', 'fsl,cpm-muram']
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000: failed to match any schema with compatible: ['fsl,qe-muram', 'fsl,cpm-muram']
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000/data-only@0: failed to match any schema with compatible: ['fsl,qe-muram-data', 'fsl,cpm-muram-data']
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: /soc/uqe@2400000: failed to match any schema with compatible: ['fsl,qe', 'simple-bus']
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000/data-only@0: failed to match any schema with compatible: ['fsl,qe-muram-data', 'fsl,cpm-muram-data']
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: /soc/uqe@2400000/qeic@80: failed to match any schema with compatible: ['fsl,qe-ic']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240703-ls_qe_warning-v1-1-7fe4af5b0bb0@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert device tree binding fsl,ls-scfg-msi to yaml format.
Additional changes:
- Include gic.h and use predefined macro in example.
- Remove label in example.
- Change node name to interrupt-controller in example.
- Fix error in example.
- ls1046a allow 4 irqs, other platform only 1 irq.
- Add $ref: msi-controller.yaml
- Add #msi-cells.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240627144207.4003708-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert qman, bman, qman-portals, bman-portals to yaml format.
Additional Change for fsl,q(b)man-portal:
- Only keep one example.
- Add fsl,qman-channel-id property.
- Use interrupt type macro.
- Remove top level qman-portals@ff4200000 at example.
Additional change for fsl,q(b)man:
- Fixed example error.
- Remove redundent part, only keep fsl,qman node.
- Change memory-regions to memory-region.
- fsl,q(b)man-portals is not required property
Additional change for fsl,qman-fqd.yaml:
- Fixed example error.
- Only keep one example.
- Ref to reserve-memory.yaml
- Merge fsl,bman reserver memory part
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240626193753.2088926-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert fsl,qoriq-mc from txt to yaml format.
Addition changes:
- Child node name allow 'ethernet'.
- Use 32bit address in example.
- Fixed missed ';' in example.
- Allow dma-coherent.
- Remove smmu, its part in example.
- Change child node name as 'ethernet'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240617170934.813321-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
We had an extra "+" at the beginning of some lines that look like a
poorly formated patch.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Last email from Tsahee Zidenberg was in 2016 [1], so move Tsahee from
Amazon platform maintainers to credits (thank you for your contributions
and maintenance!). Stale maintainer entries hide information whether
subsystem needs help, has a bus-factor or is even orphaned.
The Amazon platform still has active maintainer - Antoine Tenart -
however there was no maintenance activities coming from Antoine. All
my patches from last 4 years related to Amazon remained unanswered - no
acks, no picks - so document the actual not active status of the
platform by changing it to Odd Fixes.
[1] https://lore.kernel.org/all/?q=f%3Atsahee%40annapurnalabs.com
Cc: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Cc: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240612084038.18519-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
GPIOs controlling backlight on Spitz and Akita are coming from GPIO
expanders, not the pxa27xx-gpio block, correct it.
Additionally GPIO lookup tables operate with pin numbers rather than
legacy GPIO numbers, fix that as well. Use raw numbers instead of legacy
GPIO names to avoid confusion.
Fixes: ee0c8e494c ("backlight: corgi: Convert to use GPIO descriptors")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240628180852.1738922-2-dmitry.torokhov@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
