Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20221121145203.1efb0c08@endymion.delvare
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The raydium I2C touchscreen driver is currently manually managing the
wake IRQ. This change removes the explicit enable_irq_wake /
disable_irq_wake and instead relies on the PM subsystem. This is done by
calling dev_pm_set_wake_irq.
i2c_device_probe already calls dev_pm_set_wake_irq when using device
tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq.
There could be some device tree systems that have incorrectly declared
`wake` capabilities, so this change will set the wake irq if one is
missing. This matches the previous behavior.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Link: https://lore.kernel.org/r/20220929093200.v6.4.I06b417b274bbecb31775a73993a7a3c1bc80de7b@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Elan I2C touchscreen driver is currently manually managing the wake
IRQ. This change removes the explicit enable_irq_wake/disable_irq_wake
and instead relies on the PM subsystem. This is done by calling
dev_pm_set_wake_irq.
i2c_device_probe already calls dev_pm_set_wake_irq when using device
tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq.
There could be some device tree systems that have incorrectly declared
`wake` capabilities, so this change will set the wake irq if one is
missing. This matches the previous behavior.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Link: https://lore.kernel.org/r/20220929093200.v6.3.I5862429ee3e4de0f9ad5ba01ce07ad99eec10cf0@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
As can be seen in elants_i2c_power_off(), we want the reset GPIO
asserted when power is off. The reset GPIO is active low so we need
the reset line logic low when power is off to avoid leakage.
We have a problem, though, at probe time. At probe time we haven't
powered the regulators on yet but we have:
devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
While that _looks_ right, it turns out that it's not. The
GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the
GPIO to "not asserted". Since this is an active low GPIO that inits it
to be high.
Let's fix this to properly init the GPIO. Now after both probe and
power off the state of the GPIO is consistent (it's "asserted" or
level low).
Once we fix this, we can see that at power on time we no longer to
assert the reset GPIO as the first thing. The reset GPIO is _always_
asserted before powering on. Let's fix powering on to account for
this.
Fixes: afe10358e4 ("Input: elants_i2c - wire up regulator support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20221117123805.1.I9959ac561dd6e1e8e1ce7085e4de6167b27c574f@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In the very unlikely event the cst3xx_i2c_write() fails inside of the
cst3xx_bootloader_enter() function 5 times in a row, the uninitalized
value of tmp will get compared to CST3XX_BOOTLDR_CHK_VAL. Initialize
the value of tmp to 0 so that in this unlikely event we are comparing
0 instead of an uninitalized variable.
Fixes: 66603243f5 ("Input: add driver for Hynitron cstxxx touchscreens")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20221117195921.2291-1-macroalpha82@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This patch adds support for Himax hx83112b touchscreen devices. As there
are no publicly available data sheets for these devices, the
implementation is based on the driver of the downstream Android kernel
used in the Fairphone 3. This patch is a complete rewrite, though, and
the code bears no resemblence to the original implementation.
The driver has been tested on the aforementioned phone.
Signed-off-by: Job Noorman <job@noorman.info>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20221107105604.26541-3-job@noorman.info
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for the Hynitron cst3xx controller found on devices such
as the Anbernic RG353P and RG353V (the Hynitron CST340). This driver
was built from sources provided by Hynitron to Anbernic (possibly
via Rockchip as an intermediary) and marked as GPLv2 in the code.
This driver was written strictly for the cst3xx series, but in
most places was left somewhat generic so support could be easily
added to other devices in the future.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221028202636.14341-4-macroalpha82@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input updates from Dmitry Torokhov:
- a new driver for IBM Operational Panel
- a new driver for PinePhone keyboards
- RT5120 PMIC power key support
- various enhancements and support for new models in xpad (Xbox) driver
- a new compatible ID for Elan touchscreen driver
- rework of adp5588-keys driver to support configuring via device
properties (OF, ACPI, etc) instead of platform data, and proper
support of optional gpiochip functionality (and removal of
gpio-adp5588 driver)
- improvements to firmware update handling in Synaptics RMI4 driver
- support for double key matrix in mt6779-keypad
- support for polled mode in adc-joystick driver
- other assorted driver fixes, cleanups and improvements
* tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (90 commits)
Input: i8042 - fix refount leak on sparc
Input: i8042 - add LoongArch support in i8042-acpipnpio.h
Input: i8042 - rename i8042-x86ia64io.h to i8042-acpipnpio.h
Input: pinephone-keyboard - support the proxied I2C bus
Input: pinephone-keyboard - add PinePhone keyboard driver
dt-bindings: input: Add the PinePhone keyboard binding
dt-bindings: input: Convert hid-over-i2c to DT schema
input: drop empty comment blocks
Input: xpad - add X-Box Adaptive Profile button
Input: add ABS_PROFILE to uapi and documentation
Input: xpad - add X-Box Adaptive XBox button
Input: xpad - add X-Box Adaptive support
Input: ims-pcu - fix spelling mistake "BOOLTLOADER" -> "BOOTLOADER"
Input: ibm-panel - add missing MODULE_DEVICE_TABLE
Input: icn8505 - utilize acpi_get_subsystem_id()
Input: xpad - decipher xpadone packages with GIP defines
Input: xpad - refactor using BIT() macro
Input: synaptics-rmi4 - convert to use sysfs_emit() APIs
Input: twl4030-pwrbutton - add missing of.h include
Input: applespi - replace zero-length array with DECLARE_FLEX_ARRAY() helper
...
