Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Use uring_cmd helper (Pavel)
- Host Memory Buffer allocation enhancements (Christoph)
- Target persistent reservation support (Guixin)
- Persistent reservation tracing (Guixen)
- NVMe 2.1 specification support (Keith)
- Rotational Meta Support (Matias, Wang, Keith)
- Volatile cache detection enhancment (Guixen)
- MD updates via Song:
- Maintainers update
- raid5 sync IO fix
- Enhance handling of faulty and blocked devices
- raid5-ppl atomic improvement
- md-bitmap fix
- Support for manually defining embedded partition tables
- Zone append fixes and cleanups
- Stop sending the queued requests in the plug list to the driver
->queue_rqs() handle in reverse order.
- Zoned write plug cleanups
- Cleanups disk stats tracking and add support for disk stats for
passthrough IO
- Add preparatory support for file system atomic writes
- Add lockdep support for queue freezing. Already found a bunch of
issues, and some fixes for that are in here. More will be coming.
- Fix race between queue stopping/quiescing and IO queueing
- ublk recovery improvements
- Fix ublk mmap for 64k pages
- Various fixes and cleanups
* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
MAINTAINERS: Update git tree for mdraid subsystem
block: make struct rq_list available for !CONFIG_BLOCK
block/genhd: use seq_put_decimal_ull for diskstats decimal values
block: don't reorder requests in blk_mq_add_to_batch
block: don't reorder requests in blk_add_rq_to_plug
block: add a rq_list type
block: remove rq_list_move
virtio_blk: reverse request order in virtio_queue_rqs
nvme-pci: reverse request order in nvme_queue_rqs
btrfs: validate queue limits
block: export blk_validate_limits
nvmet: add tracing of reservation commands
nvme: parse reservation commands's action and rtype to string
nvmet: report ns's vwc not present
md/raid5: Increase r5conf.cache_name size
block: remove the ioprio field from struct request
block: remove the write_hint field from struct request
nvme: check ns's volatile write cache not present
nvme: add rotational support
nvme: use command set independent id ns if available
...
Add requests to the tail of the list instead of the front so that they
are queued up in submission order.
Remove the re-reordering in blk_mq_dispatch_plug_list, virtio_queue_rqs
and nvme_queue_rqs now that the list is ordered as expected.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the semi-open coded request list helpers with a proper rq_list
type that mirrors the bio_list and has head and tail pointers. Besides
better type safety this actually allows to insert at the tail of the
list, which will be useful soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_flush_plug_list submits requests in the reverse order that they
were submitted, which leads to a rather suboptimal I/O pattern especially
in rotational devices. Fix this by rewriting nvme_queue_rqs so that it
always pops the requests from the passed in request list, and then adds
them to the head of a local submit list. This actually simplifies the
code a bit as it removes the complicated list splicing, at the cost of
extra updates of the rq_next pointer. As that should be cache hot
anyway it should be an easy price to pay.
Fixes: d62cbcf62f ("nvme: add support for mq_ops->queue_rqs()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull NVMe updates from Keith:
"nvme updates for Linux 6.13
- Use uring_cmd helper (Pavel)
- Host Memory Buffer allocation enhancements (Christoph)
- Target persistent reservation support (Guixin)
- Persistent reservation tracing (Guixen)
- NVMe 2.1 specification support (Keith)
- Rotational Meta Support (Matias, Wang, Keith)
- Volatile cache detection enhancment (Guixen)"
* tag 'nvme-6.13-2024-11-13' of git://git.infradead.org/nvme: (22 commits)
nvmet: add tracing of reservation commands
nvme: parse reservation commands's action and rtype to string
nvmet: report ns's vwc not present
nvme: check ns's volatile write cache not present
nvme: add rotational support
nvme: use command set independent id ns if available
nvmet: support for csi identify ns
nvmet: implement rotational media information log
nvmet: implement endurance groups
nvmet: declare 2.1 version compliance
nvmet: implement crto property
nvmet: implement supported features log
nvmet: implement supported log pages
nvmet: implement active command set ns list
nvmet: implement id ns for nvm command set
nvmet: support reservation feature
nvme: add reservation command's defines
nvme-core: remove repeated wq flags
nvmet: make nvmet_wq visible in sysfs
nvme-pci: use dma_alloc_noncontigous if possible
...
Add tracing of reservation commands, including register, acquire,
release and report, and also parse the action and rtype to string
to make the trace log more human-readable.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Parse reservation commands's action(including rrega, racqa and rrela)
and rtype to string to make the trace log more human-readable.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently, we report that controller has vwc even though the ns may
not have vwc. Report ns's vwc not present when not buffered_io or
backdev doesn't have vwc.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When the VWC of a namespace does not exist, the BLK_FEAT_WRITE_CACHE
flag should not be set when registering the block device, regardless
of whether the controller supports VWC.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Rotational devices, such as hard-drives, can be detected using
the rotational bit in the namespace independent identify namespace
data structure. Make the bit visible to the block layer through the
rotational queue setting.
Signed-off-by: Wang Yugui <wangyugui@e16-tech.com>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The NVMe 2.0 specification adds an independent identify namespace
data structure that contains generic attributes that apply to all
namespace types. Some attributes carry over from the NVM command set
identify namespace data structure, and others are new.
Currently, the data structure only considered when CRIMS is enabled or
when the namespace type is key-value.
However, the independent namespace data structure is mandatory for
devices that implement features from the 2.0+ specification. Therefore,
we can check this data structure first. If unavailable, retrieve the
generic attributes from the NVM command set identify namespace data
structure.
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Implements reporting the I/O Command Set Independent Identify Namespace
command.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Most of the information is stubbed. Supporting these commands is a
requirement for supporting rotational media.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Most of the returned information is just stubbed data. The target must
support these in order to report rotational media. Since this driver
doesn't know any better, each namespace is its own endurance group with
the engid value matching the nsid.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The target driver implements all the mandatory logs, identifications,
features, and properties up to nvme sepcification 2.1.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This property is required for nvme 2.1. The target only supports ready
with media, so this is just the same value as CAP.TO.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This is required for nvme 2.1 for targets that support multiple command
sets. We support NVM and ZNS, so are required to support this
identification.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
We don't report anything here, but it's a mandatory identification for
nvme 2.1.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This patch implements the reservation feature, including:
1. reservation register(register, unregister and replace).
2. reservation acquire(acquire, preempt, preempt and abort).
3. reservation release(release and clear).
4. reservation report.
5. set feature and get feature of reservation notify mask.
6. get log page of reservation event.
Not supported:
1. persistent reservation through power loss.
Test cases:
Use nvme-cli and fio to test all implemented sub features:
1. use nvme resv-register to register host a registrant or
unregister or replace a new key.
2. use nvme resv-acquire to set host to the holder, and use fio
to send read and write io in all reservation type. And also
test preempt and "preempt and abort".
3. use nvme resv-report to show all registrants and reservation
status.
4. use nvme resv-release to release all registrants.
5. use nvme get-log to get events generated by the preceding
operations.
In addition, make reservation configurable, one can set ns to
support reservation before enable ns. The default of resv_enable
is false.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
max_zone_append_sectors differs from all other queue limits in that the
final value used is not stored in the queue_limits but needs to be
obtained using queue_limits_max_zone_append_sectors helper. This not
only adds (tiny) extra overhead to the I/O path, but also can be easily
forgotten in file system code.
Add a new max_hw_zone_append_sectors value to queue_limits which is
set by the driver, and calculate max_zone_append_sectors from that and
the other inputs in blk_validate_zoned_limits, similar to how
max_sectors is calculated to fix this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241104073955.112324-3-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241108154657.845768-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block fix from Jens Axboe:
"Single fix for an issue triggered with PROVE_RCU=y, with nvme using
the wrong iterators for an SRCU protected list"
* tag 'block-6.12-20241108' of git://git.kernel.dk/linux:
nvme/host: Fix RCU list traversal to use SRCU primitive
In nvme_core_init() nvme_wq, nvme_reset_wq, nvme_delete_wq share same
flags :- WQ_UNBOUND | WQ_MEM_RECLAIM | WQ_SYSFS.
Insated of repeating these flags in each call use the common variable.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In some complex scenarios, we deploy multiple tasks on a single machine
(hybrid deployment), such as Docker containers for function computation
(background processing), real-time tasks, monitoring, event handling,
and management, along with an NVMe target server.
Each of these components is restricted to its own CPU cores to prevent
mutual interference and ensure strict isolation. To achieve this level
of isolation for nvmet_wq we need to use sysfs tunables such as
cpumask that are currently not accessible.
Add WQ_SYSFS flag to alloc_workqueue() when creating nvmet_wq so
workqueue tunables are exported in the userspace via sysfs.
with this patch :-
nvme (nvme-6.13) # ls /sys/devices/virtual/workqueue/nvmet-wq/
affinity_scope affinity_strict cpumask max_active nice per_cpu
power subsystem uevent
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Use dma_alloc_noncontigous to allocate a single IOVA-contigous segment
when backed by an IOMMU. This allow to easily use bigger segments and
avoids running into segment limits if we can avoid it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The HMB descriptor table is sized to the maximum number of descriptors
that could be used for a given device, but __nvme_alloc_host_mem could
break out of the loop earlier on memory allocation failure and end up
using less descriptors than planned for, which leads to an incorrect
size passed to dma_free_coherent.
In practice this was not showing up because the number of descriptors
tends to be low and the dma coherent allocator always allocates and
frees at least a page.
Fixes: 87ad72a59a ("nvme-pci: implement host memory buffer support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The code currently uses list_for_each_entry_rcu() while holding an SRCU
lock, triggering false positive warnings with CONFIG_PROVE_RCU=y
enabled:
drivers/nvme/host/core.c:3770 RCU-list traversed in non-reader section!!
While the list is properly protected by SRCU lock, the code uses the wrong
list traversal primitive. Replace list_for_each_entry_rcu() with
list_for_each_entry_srcu() to correctly indicate SRCU-based protection
and eliminate the false warning.
Fixes: be647e2c76 ("nvme: use srcu for iterating namespace list")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
max_zone_append_sectors differs from all other queue limits in that the
final value used is not stored in the queue_limits but needs to be
obtained using queue_limits_max_zone_append_sectors helper. This not
only adds (tiny) extra overhead to the I/O path, but also can be easily
forgotten in file system code.
Add a new max_hw_zone_append_sectors value to queue_limits which is
set by the driver, and calculate max_zone_append_sectors from that and
the other inputs in blk_validate_zoned_limits, similar to how
max_sectors is calculated to fix this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241104073955.112324-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block fixes from Jens Axboe:
- Fixup for a recent blk_rq_map_user_bvec() patch
- NVMe pull request via Keith:
- Spec compliant identification fix (Keith)
- Module parameter to enable backward compatibility on unusual
namespace formats (Keith)
- Target double free fix when using keys (Vitaliy)
- Passthrough command error handling fix (Keith)
* tag 'block-6.12-20241101' of git://git.kernel.dk/linux:
nvme: re-fix error-handling for io_uring nvme-passthrough
nvmet-auth: assign dh_key to NULL after kfree_sensitive
nvme: module parameter to disable pi with offsets
block: fix queue limits checks in blk_rq_map_user_bvec for real
nvme: enhance cns version checking
This is only used by the nvmet zns passthrough code, which can trivially
just use bio_add_pc_page and do the sanity check for the max zone append
limit itself.
All future zoned file systems should follow the btrfs lead and let the
upper layers fill up bios unlimited by hardware constraints and split
them to the limits in the I/O submission handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20241030051859.280923-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup()
for the same controller. So it's better to nullify it after release on
error path in order to avoid double free later in nvmet_destroy_auth().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 7a277c37d3 ("nvmet-auth: Diffie-Hellman key exchange support")
Cc: stable@vger.kernel.org
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
A recent commit enables integrity checks for formats the previous kernel
versions registered with the "nop" integrity profile. This means
namespaces using that format become unreadable when upgrading the kernel
past that commit.
Introduce a module parameter to restore the "nop" integrity profile so
that storage can be readable once again. This could be a boot device, so
the setting needs to happen at module load time.
Fixes: 921e81db52 ("nvme: allow integrity when PI is not in first bytes")
Reported-by: David Wei <dw@davidwei.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The number of CNS bits in the command is specific to the nvme spec
version compliance. The existing check is not sufficient for possible
CNS values the driver uses that may create confusion between host and
device, so enhance the check to consider the version and desired CNS
value.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Command implementations shouldn't be directly looking into io_uring_cmd
to carve free space. Use an io_uring helper, which will also do build
time size sanitisation.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix target passthrough identifier (Nilay)
- Fix tcp locking (Hannes)
- Replace list with sbitmap for tracking RDMA rsp tags (Guixen)
- Remove unnecessary fallthrough statements (Tokunori)
- Remove ready-without-media support (Greg)
- Fix multipath partition scan deadlock (Keith)
- Fix concurrent PCI reset and remove queue mapping (Maurizio)
- Fabrics shutdown fixes (Nilay)
- Fix for a kerneldoc warning (Keith)
- Fix a race with blk-rq-qos and wakeups (Omar)
- Cleanup of checking for always-set tag_set (SurajSonawane2415)
- Fix for a crash with CPU hotplug notifiers (Ming)
- Don't allow zero-copy ublk on unprivileged device (Ming)
- Use array_index_nospec() for CDROM (Josh)
- Remove dead code in drbd (David)
- Tweaks to elevator loading (Breno)
* tag 'block-6.12-20241018' of git://git.kernel.dk/linux:
cdrom: Avoid barrier_nospec() in cdrom_ioctl_media_changed()
nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function
nvme: make keep-alive synchronous operation
nvme-loop: flush off pending I/O while shutting down loop controller
nvme-pci: fix race condition between reset and nvme_dev_disable()
ublk: don't allow user copy for unprivileged device
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
nvme-multipath: defer partition scanning
blk-mq: setup queue ->tag_set before initializing hctx
elevator: Remove argument from elevator_find_get
elevator: do not request_module if elevator exists
drbd: Remove unused conn_lowest_minor
nvme: disable CC.CRIME (NVME_CC_CRIME)
nvme: delete unnecessary fallthru comment
nvmet-rdma: use sbitmap to replace rsp free list
block: Fix elevator_get_default() checking for NULL q->tag_set
nvme: tcp: avoid race between queue_lock lock and destroy
nvmet-passthru: clear EUID/NGUID/UUID while using loop target
block: fix blk_rq_map_integrity_sg kernel-doc
We no more need acquiring ctrl->lock before accessing the
NVMe controller state and instead we can now use the helper
nvme_ctrl_state. So replace the use of ctrl->lock from
nvme_keep_alive_finish function with nvme_ctrl_state call.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The nvme keep-alive operation, which executes at a periodic interval,
could potentially sneak in while shutting down a fabric controller.
This may lead to a race between the fabric controller admin queue
destroy code path (invoked while shutting down controller) and hw/hctx
queue dispatcher called from the nvme keep-alive async request queuing
operation. This race could lead to the kernel crash shown below:
Call Trace:
autoremove_wake_function+0x0/0xbc (unreliable)
__blk_mq_sched_dispatch_requests+0x114/0x24c
blk_mq_sched_dispatch_requests+0x44/0x84
blk_mq_run_hw_queue+0x140/0x220
nvme_keep_alive_work+0xc8/0x19c [nvme_core]
process_one_work+0x200/0x4e0
worker_thread+0x340/0x504
kthread+0x138/0x140
start_kernel_thread+0x14/0x18
While shutting down fabric controller, if nvme keep-alive request sneaks
in then it would be flushed off. The nvme_keep_alive_end_io function is
then invoked to handle the end of the keep-alive operation which
decrements the admin->q_usage_counter and assuming this is the last/only
request in the admin queue then the admin->q_usage_counter becomes zero.
If that happens then blk-mq destroy queue operation (blk_mq_destroy_
queue()) which could be potentially running simultaneously on another
cpu (as this is the controller shutdown code path) would forward
progress and deletes the admin queue. So, now from this point onward
we are not supposed to access the admin queue resources. However the
issue here's that the nvme keep-alive thread running hw/hctx queue
dispatch operation hasn't yet finished its work and so it could still
potentially access the admin queue resource while the admin queue had
been already deleted and that causes the above crash.
This fix helps avoid the observed crash by implementing keep-alive as a
synchronous operation so that we decrement admin->q_usage_counter only
after keep-alive command finished its execution and returns the command
status back up to its caller (blk_execute_rq()). This would ensure that
fabric shutdown code path doesn't destroy the fabric admin queue until
keep-alive request finished execution and also keep-alive thread is not
running hw/hctx queue dispatch operation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
While shutting down loop controller, we first quiesce the admin/IO queue,
delete the admin/IO tag-set and then at last destroy the admin/IO queue.
However it's quite possible that during the window between quiescing and
destroying of the admin/IO queue, some admin/IO request might sneak in
and if that happens then we could potentially encounter a hung task
because shutdown operation can't forward progress until any pending I/O
is flushed off.
This commit helps ensure that before destroying the admin/IO queue, we
unquiesce the admin/IO queue so that any outstanding requests, which are
added after the admin/IO queue is quiesced, are now flushed to its
completion.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().
WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
<TASK>
? blk_mq_pci_map_queues+0x87/0x3c0
? pci_irq_get_affinity+0x187/0x210
blk_mq_pci_map_queues+0x87/0x3c0
nvme_pci_map_queues+0x189/0x460 [nvme]
blk_mq_update_nr_hw_queues+0x2a/0x40
nvme_reset_work+0x1be/0x2a0 [nvme]
Fix the bug by locking the shutdown_lock mutex before using
dev->online_queues. Give up if nvme_dev_disable() is running or if
it has been executed already.
Fixes: 949928c1c7 ("NVMe: Fix possible queue use after freed")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
We need to suppress the partition scan from occuring within the
controller's scan_work context. If a path error occurs here, the IO will
wait until a path becomes available or all paths are torn down, but that
action also occurs within scan_work, so it would deadlock. Defer the
partion scan to a different context that does not block scan_work.
Reported-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Disable NVME_CC_CRIME so that CSTS.RDY indicates that the media
is ready and able to handle commands without returning
NVME_SC_ADMIN_COMMAND_MEDIA_NOT_READY.
Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
We can use sbitmap to manage all the nvmet_rdma_rsp instead of using
free lists and spinlock, and we can use an additional tag to
determine whether the nvmet_rdma_rsp is extra allocated.
In addition, performance has improved:
1. testing environment is local rxe rdma devie and mem-based
backstore device.
2. fio command, test the average 5 times:
fio -filename=/dev/nvme0n1 --ioengine=libaio -direct=1
-size=1G -name=1 -thread -runtime=60 -time_based -rw=read -numjobs=16
-iodepth=128 -bs=4k -group_reporting
3. Before: 241k IOPS, After: 256k IOPS, an increase of about 5%.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
