Add KSM_MERGE_TIME and KSM_MERGE_TIME_HUGE_PAGES tests with
size of 100.
./run_vmtests.sh -t ksm
-----------------------------
running ./ksm_tests -H -s 100
-----------------------------
Number of normal pages: 0
Number of huge pages: 50
Total size: 100 MiB
Total time: 0.399844662 s
Average speed: 250.097 MiB/s
[PASS]
-----------------------------
running ./ksm_tests -P -s 100
-----------------------------
Total size: 100 MiB
Total time: 0.451931496 s
Average speed: 221.272 MiB/s
[PASS]
Link: https://lkml.kernel.org/r/20230728164102.4655-1-ayush.jain3@amd.com
Signed-off-by: Ayush Jain <ayush.jain3@amd.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is very unclear to me how one is supposed to run all the mm selftests
consistently and get clear results.
Most of the test programs are launched by both run_vmtests.sh and
run_kselftest.sh:
hugepage-mmap
hugepage-shm
map_hugetlb
hugepage-mremap
hugepage-vmemmap
hugetlb-madvise
map_fixed_noreplace
gup_test
gup_longterm
uffd-unit-tests
uffd-stress
compaction_test
on-fault-limit
map_populate
mlock-random-test
mlock2-tests
mrelease_test
mremap_test
thuge-gen
virtual_address_range
va_high_addr_switch
mremap_dontunmap
hmm-tests
madv_populate
memfd_secret
ksm_tests
ksm_functional_tests
soft-dirty
cow
However, of this set, when launched by run_vmtests.sh, some of the
programs are invoked multiple times with different arguments. When
invoked by run_kselftest.sh, they are invoked without arguments (and as
a consequence, some fail immediately).
Some test programs are only launched by run_vmtests.sh:
test_vmalloc.sh
And some test programs and only launched by run_kselftest.sh:
khugepaged
migration
mkdirty
transhuge-stress
split_huge_page_test
mdwe_test
write_to_hugetlbfs
Furthermore, run_vmtests.sh is invoked by run_kselftest.sh, so in this
case all the test programs invoked by both scripts are run twice!
Needless to say, this is a bit of a mess. In the absence of fully
understanding the history here, it looks to me like the best solution is
to launch ALL test programs from run_vmtests.sh, and ONLY invoke
run_vmtests.sh from run_kselftest.sh. This way, we get full control over
the parameters, each program is only invoked the intended number of
times, and regardless of which script is used, the same tests get run in
the same way.
The only drawback is that if using run_kselftest.sh, it's top-level tap
result reporting reports only a single test and it fails if any of the
contained tests fail. I don't see this as a big deal though since we
still see all the nested reporting from multiple layers. The other issue
with this is that all of run_vmtests.sh must execute within a single
kselftest timeout period, so let's increase that to something more
suitable.
In the Makefile, TEST_GEN_PROGS will compile and install the tests and
will add them to the list of tests that run_kselftest.sh will run.
TEST_GEN_FILES will compile and install the tests but will not add them
to the test list. So let's move all the programs from TEST_GEN_PROGS to
TEST_GEN_FILES so that they are built but not executed by
run_kselftest.sh. Note that run_vmtests.sh is added to TEST_PROGS, which
means it ends up in the test list. (the lack of "_GEN" means it won't be
compiled, but simply copied).
Link: https://lkml.kernel.org/r/20230724082522.1202616-9-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Until now, transhuge-stress runs until its explicitly killed, so when
invoked by run_kselftest.sh, it would run until the test timeout, then it
would be killed and the test would be marked as failed.
Add a new, optional command line parameter that allows the user to specify
the duration in seconds that the program should run. The program exits
after this duration with a success (0) exit code. If the argument is
omitted the old behacvior remains.
On it's own, this doesn't quite solve our problem because run_kselftest.sh
does not allow passing parameters to the program under test. But we will
shortly move this to run_vmtests.sh, which does allow parameter passing.
Link: https://lkml.kernel.org/r/20230724082522.1202616-8-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The `migration` test currently has a number of robustness problems that
cause it to hang and leak resources.
Timeout: There are 3 tests, which each previously ran for 60 seconds.
However, the timeout in mm/settings for a single test binary was set to 45
seconds. So when run using run_kselftest.sh, the top level timeout would
trigger before the test binary was finished. Solve this by meeting in the
middle; each of the 3 tests now runs for 20 seconds (for a total of 60),
and the top level timeout is set to 90 seconds.
Leaking child processes: the `shared_anon` test fork()s some children but
then an ASSERT() fires before the test kills those children. The assert
causes immediate exit of the parent and leaking of the children.
Furthermore, if run using the run_kselftest.sh wrapper, the wrapper would
get stuck waiting for those children to exit, which never happens. Solve
this by setting the "parent death signal" to SIGHUP in the child, so that
the child is killed automatically if the parent dies.
With these changes, the test binary now runs to completion on arm64, with
2 tests passing and the `shared_anon` test failing.
Link: https://lkml.kernel.org/r/20230724082522.1202616-7-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
thuge-gen was previously only munmapping part of the mmapped buffer, which
caused us to run out of 1G huge pages for a later part of the test. Fix
this by munmapping the whole buffer. Based on the code, it looks like a
typo rather than an intention to keep some of the buffer mapped.
thuge-gen was also calling mmap with SHM_HUGETLB flag (bit 11 set), which
is actually MAP_DENYWRITE in mmap context. The man page says this flag is
ignored in modern kernels. I'm pretty sure from the context that the
author intended to pass the MAP_HUGETLB flag so I've fixed that up too.
Link: https://lkml.kernel.org/r/20230724082522.1202616-5-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
arm64 does not support the soft-dirty PTE bit. However, the `soft-dirty`
test suite is currently run unconditionally and therefore generates
spurious test failures on arm64. There are also some tests in
`madv_populate` which assume it is supported.
For `soft-dirty` lets disable the whole suite for arm64; it is no longer
built and run_vmtests.sh will skip it if its not present.
For `madv_populate`, we need a runtime mechanism so that the remaining
tests continue to be run. Unfortunately, the only way to determine if the
soft-dirty dirty bit is supported is to write to a page, then see if the
bit is set in /proc/self/pagemap. But the tests that we want to
conditionally execute are testing precicesly this. So if we introduced
this feature check, we could accedentally turn a real failure (on a system
that claims to support soft-dirty) into a skip. So instead, do the check
based on architecture; for arm64, we report that soft-dirty is not
supported.
Link: https://lkml.kernel.org/r/20230724082522.1202616-3-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm fixes for arm64", v3.
Given my on-going work on large anon folios and contpte mappings, I
decided it would be a good idea to start running mm selftests to help
guard against regressions. However, it soon became clear that I
couldn't get the suite to run cleanly on arm64 with a vanilla v6.5-rc1
kernel (perhaps I'm just doing it wrong??), so got stuck in a rabbit
hole trying to debug and fix all the issues. Some were down to
misconfigurations, but I also found a number of issues with the tests
and even a couple of issues with the kernel.
This patch (of 8):
The selftests runner pipes the test program's stdout to tap_prefix. The
presence of the pipe means that the test program sets its stdout to be
fully buffered (as aposed to line buffered when directly connected to the
terminal). The block buffering means that there is often content in the
buffer at fork() time, which causes the output to end up duplicated. This
was causing problems for mm:cow where test results were duplicated 20-30x.
Solve this by using `stdbuf`, when available to force the test program to
use line buffered mode. This means previously printf'ed results are
flushed out of the program before any fork().
Additionally, explicitly set line buffer mode in ksft_print_header(),
which means that all test programs that use the ksft framework will
benefit even if stdbuf is not present on the system.
[ryan.roberts@arm.com: add setvbuf() to set buffering mode]
Link: https://lkml.kernel.org/r/20230726070655.2713530-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230724082522.1202616-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230724082522.1202616-2-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a function test_unmerge_zero_page() to test the functionality on
unsharing and counting ksm-placed zero pages and counting of this patch
series.
test_unmerge_zero_page() actually contains four subjct test objects:
(1) whether the count of ksm zero pages can update correctly after merging;
(2) whether the count of ksm zero pages can update correctly after
unmerging by madvise(...MADV_UNMERGEABLE);
(3) whether the count of ksm zero pages can update correctly after
unmerging by triggering write fault.
(4) whether ksm zero pages are really unmerged.
Link: https://lkml.kernel.org/r/20230613030947.186089-1-yang.yang29@zte.com.cn
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Xiaokai Ran <ran.xiaokai@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull probe fixes from Masami Hiramatsu:
- probe-events: add NULL check for some BTF API calls which can return
error code and NULL.
- ftrace selftests: check fprobe and kprobe event correctly. This fixes
a miss condition of the test command.
- kprobes: do not allow probing functions that start with "__cfi_" or
"__pfx_" since those are auto generated for kernel CFI and not
executed.
* tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Prohibit probing on CFI preamble symbol
selftests/ftrace: Fix to check fprobe event eneblement
tracing/probes: Fix to add NULL check for BTF APIs
Pull kvm fixes from Paolo Bonzini:
"x86:
- Do not register IRQ bypass consumer if posted interrupts not
supported
- Fix missed device interrupt due to non-atomic update of IRR
- Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
- Make VMREAD error path play nice with noinstr
- x86: Acquire SRCU read lock when handling fastpath MSR writes
- Support linking rseq tests statically against glibc 2.35+
- Fix reference count for stats file descriptors
- Detect userspace setting invalid CR0
Non-KVM:
- Remove coccinelle script that has caused multiple confusion
("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE()
usage", acked by Greg)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
KVM: selftests: Verify stats fd is usable after VM fd has been closed
KVM: selftests: Verify stats fd can be dup()'d and read
KVM: selftests: Verify userspace can create "redundant" binary stats files
KVM: selftests: Explicitly free vcpus array in binary stats test
KVM: selftests: Clean up stats fd in common stats_test() helper
KVM: selftests: Use pread() to read binary stats header
KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes
KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
KVM: VMX: Make VMREAD error path play nice with noinstr
KVM: x86/irq: Conditionally register IRQ bypass consumer again
KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
KVM: x86: check the kvm_cpu_get_interrupt result before using it
KVM: x86: VMX: set irr_pending in kvm_apic_update_irr
...
Add coverage to x86's set_sregs_test to verify KVM rejects vendor-agnostic
illegal CR0 values, i.e. CR0 values whose legality doesn't depend on the
current VMX mode. KVM historically has neglected to reject bad CR0s from
userspace, i.e. would happily accept a completely bogus CR0 via
KVM_SET_SREGS{2}.
Punt VMX specific subtests to future work, as they would require quite a
bit more effort, and KVM gets coverage for CR0 checks in general through
other means, e.g. KVM-Unit-Tests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Verify that VM and vCPU binary stats files are usable even after userspace
has put its last direct reference to the VM. This is a regression test
for a UAF bug where KVM didn't gift the stats files a reference to the VM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expand the binary stats test to verify that a stats fd can be dup()'d
and read, to (very) roughly simulate userspace passing around the file.
Adding the dup() test is primarily an intermediate step towards verifying
that userspace can read VM/vCPU stats before _and_ after userspace closes
its copy of the VM fd; the dup() test itself is only mildly interesting.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Verify that KVM doesn't artificially limit KVM_GET_STATS_FD to a single
file per VM/vCPU. There's no known use case for getting multiple stats
fds, but it should work, and more importantly creating multiple files will
make it easier to test that KVM correct manages VM refcounts for stats
files.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly free the all-encompassing vcpus array in the binary stats test
so that the test is consistent with respect to freeing all dynamically
allocated resources (versus letting them be freed on exit).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the stats fd cleanup code into stats_test() and drop the
superfluous vm_stats_test() and vcpu_stats_test() helpers in order to
decouple creation of the stats file from consuming/testing the file
(deduping code is a bonus). This will make it easier to test various
edge cases related to stats, e.g. that userspace can dup() a stats fd,
that userspace can have multiple stats files for a singleVM/vCPU, etc.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use pread() with an explicit offset when reading the header and the header
name for a binary stats fd so that the common helper and the binary stats
test don't subtly rely on the file effectively being untouched, e.g. to
allow multiple reads of the header, name, etc.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To allow running rseq and KVM's rseq selftests as statically linked
binaries, initialize the various "trampoline" pointers to point directly
at the expect glibc symbols, and skip the dlysm() lookups if the rseq
size is non-zero, i.e. the binary is statically linked *and* the libc
registered its own rseq.
Define weak versions of the symbols so as not to break linking against
libc versions that don't support rseq in any capacity.
The KVM selftests in particular are often statically linked so that they
can be run on targets with very limited runtime environments, i.e. test
machines.
Fixes: 233e667e1a ("selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35")
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721223352.2333911-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull cxl fixes from Vishal Verma:
- Update MAINTAINERS for cxl
- A few static analysis fixes
- Fix a Kconfig dependency for CONFIG_FW_LOADER
* tag 'cxl-fixes-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
tools/testing/cxl: Remove unused SZ_512G macro
cxl/acpi: Return 'rc' instead of '0' in cxl_parse_cfmws()
cxl/acpi: Fix a use-after-free in cxl_parse_cfmws()
cxl: Update MAINTAINERS
cxl/mem: Fix a double shift bug
cxl: fix CONFIG_FW_LOADER dependency
Pull networking fixes from Paolo Abeni:
"Including fixes from can, netfilter.
Current release - regressions:
- core: fix splice_to_socket() for O_NONBLOCK socket
- af_unix: fix fortify_panic() in unix_bind_bsd().
- can: raw: fix lockdep issue in raw_release()
Previous releases - regressions:
- tcp: reduce chance of collisions in inet6_hashfn().
- netfilter: skip immediate deactivate in _PREPARE_ERROR
- tipc: stop tipc crypto on failure in tipc_node_create
- eth: igc: fix kernel panic during ndo_tx_timeout callback
- eth: iavf: fix potential deadlock on allocation failure
Previous releases - always broken:
- ipv6: fix bug where deleting a mngtmpaddr can create a new
temporary address
- eth: ice: fix memory management in ice_ethtool_fdir.c
- eth: hns3: fix the imp capability bit cannot exceed 32 bits issue
- eth: vxlan: calculate correct header length for GPE
- eth: stmmac: apply redundant write work around on 4.xx too"
* tag 'net-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
tipc: stop tipc crypto on failure in tipc_node_create
af_unix: Terminate sun_path when bind()ing pathname socket.
tipc: check return value of pskb_trim()
benet: fix return value check in be_lancer_xmit_workarounds()
virtio-net: fix race between set queues and probe
net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64
splice, net: Fix splice_to_socket() for O_NONBLOCK socket
net: fec: tx processing does not call XDP APIs if budget is 0
mptcp: more accurate NL event generation
selftests: mptcp: join: only check for ip6tables if needed
tools: ynl-gen: fix parse multi-attr enum attribute
tools: ynl-gen: fix enum index in _decode_enum(..)
netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID
netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR
netfilter: nft_set_rbtree: fix overlap expiration walk
igc: Fix Kernel Panic during ndo_tx_timeout callback
net: dsa: qca8k: fix mdb add/del case with 0 VID
net: dsa: qca8k: fix broken search_and_del
net: dsa: qca8k: fix search_and_insert wrong handling of new rule
net: dsa: qca8k: enable use_single_write for qca8xxx
...
Pull sound fixes from Takashi Iwai:
"A pile of fixes that have been gathered since the previous pull. Most
of changes are device-specific, and nothing looks too scary.
- A memory leak fix in ALSA sequencer code in 6.5-rc
- Many fixes for ASoC Qualcomm CODEC drivers, covering SoundWire
probe problems
- A series of ASoC AMD fixes
- A few fixes and cleanups of selftest stuff
- HD-audio codec fixes and quirks for Clevo, HP, Lenovo, Dell"
* tag 'sound-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (52 commits)
ALSA: hda/realtek: Add support for DELL Oasis 13/14/16 laptops
ALSA: hda/realtek: Fix generic fixup definition for cs35l41 amp
ALSA: hda/realtek: Enable Mute LED on HP Laptop 15s-eq2xxx
selftests: ALSA: Add test-pcmtest-driver to .gitignore
ALSA: hda/realtek: Add quirk for Clevo NS70AU
ASoC: fsl_sai: Disable bit clock with transmitter
ALSA: seq: Fix memory leak at error path in snd_seq_create_port()
ASoC: SOF: ipc3-dtrace: uninitialized data in dfsentry_trace_filter_write()
ASoC: cs42l51: fix driver to properly autoload with automatic module loading
MAINTAINERS: Redo addition of ssm3515 to APPLE SOUND
ASoC: rt5640: Fix the issue of speaker noise
ALSA: hda/realtek - remove 3k pull low procedure
selftests: ALSA: Fix fclose on an already fclosed file pointer
ALSA: pcmtest: Don't use static storage to track per device data
ALSA: pcmtest: Convert to platform remove callback returning void
ASoC: dt-bindings: audio-graph-card2: Drop incomplete example
ASoC: dt-bindings: Update maintainer email id
ASoC: amd: ps: Fix extraneous error messages
ASoC: fsl_sai: Revert "ASoC: fsl_sai: Enable MCTL_MCLK_EN bit for master mode"
ASoC: codecs: SND_SOC_WCD934X should select REGMAP_IRQ
...
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF, netfilter, bluetooth and CAN.
Current release - regressions:
- eth: r8169: multiple fixes for PCIe ASPM-related problems
- vrf: fix RCU lockdep splat in output path
Previous releases - regressions:
- gso: fall back to SW segmenting with GSO_UDP_L4 dodgy bit set
- dsa: mv88e6xxx: do a final check before timing out when polling
- nf_tables: fix sleep in atomic in nft_chain_validate
Previous releases - always broken:
- sched: fix undoing tcf_bind_filter() in multiple classifiers
- bpf, arm64: fix BTI type used for freplace attached functions
- can: gs_usb: fix time stamp counter initialization
- nft_set_pipapo: fix improper element removal (leading to UAF)
Misc:
- net: support STP on bridge in non-root netns, STP prevents packet
loops so not supporting it results in freezing systems of
unsuspecting users, and in turn very upset noises being made
- fix kdoc warnings
- annotate various bits of TCP state to prevent data races"
* tag 'net-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: phy: prevent stale pointer dereference in phy_init()
tcp: annotate data-races around fastopenq.max_qlen
tcp: annotate data-races around icsk->icsk_user_timeout
tcp: annotate data-races around tp->notsent_lowat
tcp: annotate data-races around rskq_defer_accept
tcp: annotate data-races around tp->linger2
tcp: annotate data-races around icsk->icsk_syn_retries
tcp: annotate data-races around tp->keepalive_probes
tcp: annotate data-races around tp->keepalive_intvl
tcp: annotate data-races around tp->keepalive_time
tcp: annotate data-races around tp->tsoffset
tcp: annotate data-races around tp->tcp_tx_delay
Bluetooth: MGMT: Use correct address for memcpy()
Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
Bluetooth: SCO: fix sco_conn related locking and validity issues
Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
Bluetooth: coredump: fix building with coredump disabled
Bluetooth: ISO: fix iso_conn related locking and validity issues
Bluetooth: hci_event: call disconnect callback before deleting conn
...
Alexei Starovoitov says:
====================
pull-request: bpf 2023-07-19
We've added 4 non-merge commits during the last 1 day(s) which contain
a total of 3 files changed, 55 insertions(+), 10 deletions(-).
The main changes are:
1) Fix stack depth check in presence of async callbacks,
from Kumar Kartikeya Dwivedi.
2) Fix BTI type used for freplace attached functions,
from Alexander Duyck.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, arm64: Fix BTI type used for freplace attached functions
selftests/bpf: Add more tests for check_max_stack_depth bug
bpf: Repeat check_max_stack_depth for async callbacks
bpf: Fix subprog idx logic in check_max_stack_depth
====================
Link: https://lore.kernel.org/r/20230719174502.74023-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Another test which now exercies the path of the verifier where it will
explore call chains rooted at the async callback. Without the prior
fixes, this program loads successfully, which is incorrect.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230717161530.1238-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull hotfixes from Andrew Morton:
"Seven hotfixes, six of which are cc:stable and one of which addresses
a post-6.5 issue"
* tag 'mm-hotfixes-stable-2023-07-18-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: fix node allocation testing on 32 bit
maple_tree: fix 32 bit mas_next testing
selftests/mm: mkdirty: fix incorrect position of #endif
maple_tree: set the node limit when creating a new root node
mm/mlock: fix vma iterator conversion of apply_vma_lock_flags()
prctl: move PR_GET_AUXV out of PR_MCE_KILL
selftests/mm: give scripts execute permission
