a723d434009e8b8ac0bcbb322188061a94de1000
310 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
4f05e82003 |
Merge tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen: - Select some options in Kconfig - Give a chance to build with !CONFIG_SMP - Switch to use built-in rustc target - Add new supported device nodes to dts - Some bug fixes and other small changes - Update the default config file * tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Update Loongson-3 default config file LoongArch: dts: Add new supported device nodes to Loongson-2K2000 LoongArch: dts: Add new supported device nodes to Loongson-2K0500 LoongArch: dts: Remove "disabled" state of clock controller node LoongArch: rust: Switch to use built-in rustc target LoongArch: Fix callchain parse error with kernel tracepoint events again LoongArch: Give a chance to build with !CONFIG_SMP LoongArch: Select THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE LoongArch: Select ARCH_WANT_DEFAULT_BPF_JIT LoongArch: Select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 LoongArch: Select ARCH_HAS_FAST_MULTIPLIER |
||
|
Linus Torvalds
|
0cc6f45cec |
Merge tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core:
- IOMMU memory usage observability - This will make the memory used
for IO page tables explicitly visible.
- Simplify arch_setup_dma_ops()
Intel VT-d:
- Consolidate domain cache invalidation
- Remove private data from page fault message
- Allocate DMAR fault interrupts locally
- Cleanup and refactoring
ARM-SMMUv2:
- Support for fault debugging hardware on Qualcomm implementations
- Re-land support for the ->domain_alloc_paging() callback
ARM-SMMUv3:
- Improve handling of MSI allocation failure
- Drop support for the "disable_bypass" cmdline option
- Major rework of the CD creation code, following on directly from
the STE rework merged last time around.
- Add unit tests for the new STE/CD manipulation logic
AMD-Vi:
- Final part of SVA changes with generic IO page fault handling
Renesas IPMMU:
- Add support for R8A779H0 hardware
... and a couple smaller fixes and updates across the sub-tree"
* tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (80 commits)
iommu/arm-smmu-v3: Make the kunit into a module
arm64: Properly clean up iommu-dma remnants
iommu/amd: Enable Guest Translation after reading IOMMU feature register
iommu/vt-d: Decouple igfx_off from graphic identity mapping
iommu/amd: Fix compilation error
iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry
iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()
iommu/arm-smmu-v3: Move the CD generation for SVA into a function
iommu/arm-smmu-v3: Allocate the CD table entry in advance
iommu/arm-smmu-v3: Make arm_smmu_alloc_cd_ptr()
iommu/arm-smmu-v3: Consolidate clearing a CD table entry
iommu/arm-smmu-v3: Move the CD generation for S1 domains into a function
iommu/arm-smmu-v3: Make CD programming use arm_smmu_write_entry()
iommu/arm-smmu-v3: Add an ops indirection to the STE code
iommu/arm-smmu-qcom: Don't build debug features as a kernel module
iommu/amd: Add SVA domain support
iommu: Add ops->domain_alloc_sva()
iommu/amd: Initial SVA support for AMD IOMMU
iommu/amd: Add support for enable/disable IOPF
iommu/amd: Add IO page fault notifier handler
...
|
||
|
Linus Torvalds
|
70a663205d |
Merge tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- tracing/probes: Add new pseudo-types %pd and %pD support for dumping
dentry name from 'struct dentry *' and file name from 'struct file *'
- uprobes performance optimizations:
- Speed up the BPF uprobe event by delaying the fetching of the
uprobe event arguments that are not used in BPF
- Avoid locking by speculatively checking whether uprobe event is
valid
- Reduce lock contention by using read/write_lock instead of
spinlock for uprobe list operation. This improved BPF uprobe
benchmark result 43% on average
- rethook: Remove non-fatal warning messages when tracing stack from
BPF and skip rcu_is_watching() validation in rethook if possible
- objpool: Optimize objpool (which is used by kretprobes and fprobe as
rethook backend storage) by inlining functions and avoid caching
nr_cpu_ids because it is a const value
- fprobe: Add entry/exit callbacks types (code cleanup)
- kprobes: Check ftrace was killed in kprobes if it uses ftrace
* tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobe/ftrace: bail out if ftrace was killed
selftests/ftrace: Fix required features for VFS type test case
objpool: cache nr_possible_cpus() and avoid caching nr_cpu_ids
objpool: enable inlining objpool_push() and objpool_pop() operations
rethook: honor CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING in rethook_try_get()
ftrace: make extra rcu_is_watching() validation check optional
uprobes: reduce contention on uprobes_tree access
rethook: Remove warning messages printed for finding return address of a frame.
fprobe: Add entry/exit callbacks types
selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD"
selftests/ftrace: add kprobe test cases for VFS type "%pd" and "%pD"
Documentation: tracing: add new type '%pd' and '%pD' for kprobe
tracing/probes: support '%pD' type for print struct file's name
tracing/probes: support '%pd' type for print struct dentry's name
uprobes: add speculative lockless system-wide uprobe filter check
uprobes: prepare uprobe args buffer lazily
uprobes: encapsulate preparation of uprobe args buffer
|
||
Stephen Brennan
|
1a7d0890dd |
kprobe/ftrace: bail out if ftrace was killed
If an error happens in ftrace, ftrace_kill() will prevent disarming kprobes. Eventually, the ftrace_ops associated with the kprobes will be freed, yet the kprobes will still be active, and when triggered, they will use the freed memory, likely resulting in a page fault and panic. This behavior can be reproduced quite easily, by creating a kprobe and then triggering a ftrace_kill(). For simplicity, we can simulate an ftrace error with a kernel module like [1]: [1]: https://github.com/brenns10/kernel_stuff/tree/master/ftrace_killer sudo perf probe --add commit_creds sudo perf trace -e probe:commit_creds # In another terminal make sudo insmod ftrace_killer.ko # calls ftrace_kill(), simulating bug # Back to perf terminal # ctrl-c sudo perf probe --del commit_creds After a short period, a page fault and panic would occur as the kprobe continues to execute and uses the freed ftrace_ops. While ftrace_kill() is supposed to be used only in extreme circumstances, it is invoked in FTRACE_WARN_ON() and so there are many places where an unexpected bug could be triggered, yet the system may continue operating, possibly without the administrator noticing. If ftrace_kill() does not panic the system, then we should do everything we can to continue operating, rather than leave a ticking time bomb. Link: https://lore.kernel.org/all/20240501162956.229427-1-stephen.s.brennan@oracle.com/ Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Guo Ren <guoren@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
|
Linus Torvalds
|
f4b0c4b508 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Move a lot of state that was previously stored on a per vcpu basis
into a per-CPU area, because it is only pertinent to the host while
the vcpu is loaded. This results in better state tracking, and a
smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in nested
virtualisation. The last two instructions also require emulating
part of the pointer authentication extension. As a result, the trap
handling of pointer authentication has been greatly simplified.
- Turn the global (and not very scalable) LPI translation cache into
a per-ITS, scalable cache, making non directly injected LPIs much
cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing for
smaller EL2 mapping and some flexibility in implementing more or
less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR map has
been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
LoongArch:
- Add ParaVirt IPI support
- Add software breakpoint support
- Add mmio trace events support
RISC-V:
- Support guest breakpoints using ebreak
- Introduce per-VCPU mp_state_lock and reset_cntx_lock
- Virtualize SBI PMU snapshot and counter overflow interrupts
- New selftests for SBI PMU and Guest ebreak
- Some preparatory work for both TDX and SNP page fault handling.
This also cleans up the page fault path, so that the priorities of
various kinds of fauls (private page, no memory, write to read-only
slot, etc.) are easier to follow.
x86:
- Minimize amount of time that shadow PTEs remain in the special
REMOVED_SPTE state.
This is a state where the mmu_lock is held for reading but
concurrent accesses to the PTE have to spin; shortening its use
allows other vCPUs to repopulate the zapped region while the zapper
finishes tearing down the old, defunct page tables.
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID
field, which is defined by hardware but left for software use.
This lets KVM communicate its inability to map GPAs that set bits
51:48 on hosts without 5-level nested page tables. Guest firmware
is expected to use the information when mapping BARs; this avoids
that they end up at a legal, but unmappable, GPA.
- Fixed a bug where KVM would not reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- As usual, a bunch of code cleanups.
x86 (AMD):
- Implement a new and improved API to initialize SEV and SEV-ES VMs,
which will also be extendable to SEV-SNP.
The new API specifies the desired encryption in KVM_CREATE_VM and
then separately initializes the VM. The new API also allows
customizing the desired set of VMSA features; the features affect
the measurement of the VM's initial state, and therefore enabling
them cannot be done tout court by the hypervisor.
While at it, the new API includes two bugfixes that couldn't be
applied to the old one without a flag day in userspace or without
affecting the initial measurement. When a SEV-ES VM is created with
the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected
once the VMSA has been encrypted. Also, the FPU and AVX state will
be synchronized and encrypted too.
- Support for GHCB version 2 as applicable to SEV-ES guests.
This, once more, is only accessible when using the new
KVM_SEV_INIT2 flow for initialization of SEV-ES VMs.
x86 (Intel):
- An initial bunch of prerequisite patches for Intel TDX were merged.
They generally don't do anything interesting. The only somewhat
user visible change is a new debugging mode that checks that KVM's
MMU never triggers a #VE virtualization exception in the guest.
- Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig
VM-Exit to L1, as per the SDM.
Generic:
- Use vfree() instead of kvfree() for allocations that always use
vcalloc() or __vcalloc().
- Remove .change_pte() MMU notifier - the changes to non-KVM code are
small and Andrew Morton asked that I also take those through the
KVM tree.
The callback was only ever implemented by KVM (which was also the
original user of MMU notifiers) but it had been nonfunctional ever
since calls to set_pte_at_notify were wrapped with
invalidate_range_start and invalidate_range_end... in 2012.
Selftests:
- Enhance the demand paging test to allow for better reporting and
stressing of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing
elapsed time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support
MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test wrapper
shell script, to play nice with running in a minimal userspace
environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able
to complete a reasonable number of KVM_RUNs, as the assert can fail
on a completely valid setup.
If the test is run on a large-ish system that is otherwise idle,
and the test isn't affined to a low-ish number of CPUs, the vCPU
task can be repeatedly migrated to CPUs that are in deep sleep
states, which results in the vCPU having very little net runtime
before the next migration due to high wakeup latencies.
- Define _GNU_SOURCE for all selftests to fix a warning that was
introduced by a change to kselftest_harness.h late in the 6.9
cycle, and because forcing every test to #define _GNU_SOURCE is
painful.
- Provide a global pseudo-RNG instance for all tests, so that library
code can generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes
from guest code on x86, e.g. to help validate KVM's emulation of
locked accesses.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default
exception handlers at VM creation, instead of forcing tests to
manually trigger the related setup.
Documentation:
- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits)
selftests/kvm: remove dead file
KVM: selftests: arm64: Test vCPU-scoped feature ID registers
KVM: selftests: arm64: Test that feature ID regs survive a reset
KVM: selftests: arm64: Store expected register value in set_id_regs
KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
KVM: arm64: Only reset vCPU-scoped feature ID regs once
KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
KVM: arm64: Rename is_id_reg() to imply VM scope
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: SEV: Allow per-guest configuration of GHCB protocol version
KVM: SEV: Add GHCB handling for termination requests
KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
KVM: SEV: Add support to handle AP reset MSR protocol
KVM: x86: Explicitly zero kvm_caps during vendor module load
KVM: x86: Fully re-initialize supported_mce_cap on vendor module load
KVM: x86: Fully re-initialize supported_vm_types on vendor module load
KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values
...
|
||
Mike Rapoport (IBM)
|
0cc2dc4902 |
arch: make execmem setup available regardless of CONFIG_MODULES
execmem does not depend on modules, on the contrary modules use execmem. To make execmem available when CONFIG_MODULES=n, for instance for kprobes, split execmem_params initialization out from arch/*/kernel/module.c and compile it when CONFIG_EXECMEM=y Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Mike Rapoport (IBM)
|
f6bec26c0a |
mm/execmem, arch: convert simple overrides of module_alloc to execmem
Several architectures override module_alloc() only to define address range for code allocations different than VMALLOC address space. Provide a generic implementation in execmem that uses the parameters for address space ranges, required alignment and page protections provided by architectures. The architectures must fill execmem_info structure and implement execmem_arch_setup() that returns a pointer to that structure. This way the execmem initialization won't be called from every architecture, but rather from a central place, namely a core_initcall() in execmem. The execmem provides execmem_alloc() API that wraps __vmalloc_node_range() with the parameters defined by the architectures. If an architecture does not implement execmem_arch_setup(), execmem_alloc() will fall back to module_alloc(). Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Song Liu <song@kernel.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
Tiezhu Yang
|
5685d7fcb5 |
LoongArch: Give a chance to build with !CONFIG_SMP
In the current code, SMP is selected in Kconfig for LoongArch, the users
can not unset it, this is reasonable for a multi-processor machine. But
as the help info of config SMP said, if you have a system with only one
CPU, say N. On a uni-processor machine, the kernel will run faster if you
say N here.
Loongson-2K0500 is a single-core CPU for applications like industrial
control, printing terminals, and BMC (Baseboard Management Controller),
there are many development boards, products and solutions on the market,
so it is better and necessary to give a chance to build with !CONFIG_SMP
for a uni-processor machine.
First of all, do not select SMP for config LOONGARCH in Kconfig to make
it possible to unset CONFIG_SMP. Then, do some changes to fix warnings
and errors if CONFIG_SMP is not set.
(1) Define get_ipi_irq() only if CONFIG_SMP is set to fix the warning:
arch/loongarch/kernel/irq.c:90:19: warning: 'get_ipi_irq' defined but not used [-Wunused-function]
(2) Add "#ifdef CONFIG_SMP" in asm/smp.h to fix the warning:
./arch/loongarch/include/asm/smp.h:49:9: warning: "raw_smp_processor_id" redefined
49 | #define raw_smp_processor_id raw_smp_processor_id
| ^~~~~~~~~~~~~~~~~~~~
./include/linux/smp.h:198:9: note: this is the location of the previous definition
198 | #define raw_smp_processor_id() 0
(3) Define machine_shutdown() as empty under !CONFIG_SMP to fix the error:
arch/loongarch/kernel/machine_kexec.c: In function 'machine_shutdown':
arch/loongarch/kernel/machine_kexec.c:233:25: error: implicit declaration of function 'cpu_device_up'; did you mean 'put_device'? [-Wimplicit-function-declaration]
(4) Make config SCHED_SMT depends on SMP to fix many errors such as:
kernel/sched/core.c: In function 'sched_core_find':
kernel/sched/core.c:310:43: error: 'struct rq' has no member named 'cpu'
(5) Define cpu_logical_map(cpu) as 0 under !CONFIG_SMP in asm/smp.h,
then include asm/smp.h in asm/acpi.h (because acpi.h is included in
linux/irq.h indirectly) to fix many build errors under drivers/irqchip
such as:
drivers/irqchip/irq-loongson-eiointc.c: In function 'cpu_to_eio_node':
drivers/irqchip/irq-loongson-eiointc.c:59:16: error: implicit declaration of function 'cpu_logical_map' [-Wimplicit-function-declaration]
(6) Do not write per_cpu_offset(0) to PERCPU_BASE_KS when resume because
the per_cpu_offset(x) macro is defined as (__per_cpu_offset[x]) only
under CONFIG_SMP in include/asm-generic/percpu.h. Just save the value of
PERCPU_BASE_KS when suspend and restore it when resume to fix the error:
arch/loongarch/power/suspend.c: In function 'loongarch_common_resume':
arch/loongarch/power/suspend.c:47:21: error: implicit declaration of function 'per_cpu_offset' [-Wimplicit-function-declaration]
(7) Fix huge page handling under !CONFIG_SMP in tlbex.S.
When running the UnixBench tests with "-c 1" single-streamed pass, the
improvement of performance is about 9 percent with this patch.
By the way, it is helpful to debug and analysis the kernel issues of
multi-processor system under !CONFIG_SMP.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
Joerg Roedel
|
2bd5059c6c | Merge branches 'arm/renesas', 'arm/smmu', 'x86/amd', 'core' and 'x86/vt-d' into next | ||
Bibo Mao
|
74c16b2e2b |
LoongArch: KVM: Add PV IPI support on guest side
PARAVIRT config option and PV IPI is added for the guest side, function pv_ipi_init() is used to add IPI sending and IPI receiving hooks. This function firstly checks whether system runs in VM mode, and if kernel runs in VM mode, it will call function kvm_para_available() to detect the current hypervirsor type (now only KVM type detection is supported). The paravirt functions can work only if current hypervisor type is KVM, since there is only KVM supported on LoongArch now. PV IPI uses virtual IPI sender and virtual IPI receiver functions. With virtual IPI sender, IPI message is stored in memory rather than emulated HW. IPI multicast is also supported, and 128 vcpus can received IPIs at the same time like X86 KVM method. Hypercall method is used for IPI sending. With virtual IPI receiver, HW SWI0 is used rather than real IPI HW. Since VCPU has separate HW SWI0 like HW timer, there is no trap in IPI interrupt acknowledge. Since IPI message is stored in memory, there is no trap in getting IPI message. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Bibo Mao
|
316863cb62 |
LoongArch/smp: Refine some ipi functions on LoongArch platform
Refine the ipi handling on LoongArch platform, there are three modifications: 1. Add generic function get_percpu_irq(), replacing some percpu irq functions such as get_ipi_irq()/get_pmc_irq()/get_timer_irq() with get_percpu_irq(). 2. Change definition about parameter action called by function loongson_send_ipi_single() and loongson_send_ipi_mask(), and it is defined as decimal encoding format at ipi sender side. Normal decimal encoding is used rather than binary bitmap encoding for ipi action, ipi hw sender uses decimal encoding code, and ipi receiver will get binary bitmap encoding, the ipi hw will convert it into bitmap in ipi message buffer. 3. Add a structure smp_ops on LoongArch platform so that pv ipi can be used later. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Robin Murphy
|
fece6530bf |
dma-mapping: Add helpers for dma_range_map bounds
Several places want to compute the lower and/or upper bounds of a dma_range_map, so let's factor that out into reusable helpers. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> # For arm64 Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/45ec52f033ec4dfb364e23f48abaf787f612fa53.1713523152.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
|
Bibo Mao
|
f3334ebb8a |
LoongArch: Lately init pmu after smp is online
There is an smp function call named reset_counters() to init PMU registers of every CPU in PMU initialization state. It requires that all CPUs are online. However there is an early_initcall() wrapper for the PMU init funciton init_hw_perf_events(), so that pmu init funciton is called in do_pre_smp_initcalls() which before function smp_init(). Function reset_counters() cannot work on other CPUs since they haven't boot up still. Here replace the wrapper early_initcall() with pure_initcall(), so that the PMU init function is called after every cpu is online. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Linus Torvalds
|
1e3cd03c54 |
Merge tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add objtool support for LoongArch
- Add ORC stack unwinder support for LoongArch
- Add kernel livepatching support for LoongArch
- Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
- Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
- Some bug fixes and other small changes
* tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch/crypto: Clean up useless assignment operations
LoongArch: Define the __io_aw() hook as mmiowb()
LoongArch: Remove superfluous flush_dcache_page() definition
LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.h
LoongArch: Change __my_cpu_offset definition to avoid mis-optimization
LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
LoongArch: Add kernel livepatching support
LoongArch: Add ORC stack unwinder support
objtool: Check local label in read_unwind_hints()
objtool: Check local label in add_dead_ends()
objtool/LoongArch: Enable orc to be built
objtool/x86: Separate arch-specific and generic parts
objtool/LoongArch: Implement instruction decoder
objtool/LoongArch: Enable objtool to be built
|
||
|
Linus Torvalds
|
902861e34c |
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
||
|
Linus Torvalds
|
9187210eee |
Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
||
|
Linus Torvalds
|
d08c407f71 |
Merge tag 'timers-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A large set of updates and features for timers and timekeeping:
- The hierarchical timer pull model
When timer wheel timers are armed they are placed into the timer
wheel of a CPU which is likely to be busy at the time of expiry.
This is done to avoid wakeups on potentially idle CPUs.
This is wrong in several aspects:
1) The heuristics to select the target CPU are wrong by
definition as the chance to get the prediction right is
close to zero.
2) Due to #1 it is possible that timers are accumulated on
a single target CPU
3) The required computation in the enqueue path is just overhead
for dubious value especially under the consideration that the
vast majority of timer wheel timers are either canceled or
rearmed before they expire.
The timer pull model avoids the above by removing the target
computation on enqueue and queueing timers always on the CPU on
which they get armed.
This is achieved by having separate wheels for CPU pinned timers
and global timers which do not care about where they expire.
As long as a CPU is busy it handles both the pinned and the global
timers which are queued on the CPU local timer wheels.
When a CPU goes idle it evaluates its own timer wheels:
- If the first expiring timer is a pinned timer, then the global
timers can be ignored as the CPU will wake up before they
expire.
- If the first expiring timer is a global timer, then the expiry
time is propagated into the timer pull hierarchy and the CPU
makes sure to wake up for the first pinned timer.
The timer pull hierarchy organizes CPUs in groups of eight at the
lowest level and at the next levels groups of eight groups up to
the point where no further aggregation of groups is required, i.e.
the number of levels is log8(NR_CPUS). The magic number of eight
has been established by experimention, but can be adjusted if
needed.
In each group one busy CPU acts as the migrator. It's only one CPU
to avoid lock contention on remote timer wheels.
The migrator CPU checks in its own timer wheel handling whether
there are other CPUs in the group which have gone idle and have
global timers to expire. If there are global timers to expire, the
migrator locks the remote CPU timer wheel and handles the expiry.
Depending on the group level in the hierarchy this handling can
require to walk the hierarchy downwards to the CPU level.
Special care is taken when the last CPU goes idle. At this point
the CPU is the systemwide migrator at the top of the hierarchy and
it therefore cannot delegate to the hierarchy. It needs to arm its
own timer device to expire either at the first expiring timer in
the hierarchy or at the first CPU local timer, which ever expires
first.
This completely removes the overhead from the enqueue path, which
is e.g. for networking a true hotpath and trades it for a slightly
more complex idle path.
This has been in development for a couple of years and the final
series has been extensively tested by various teams from silicon
vendors and ran through extensive CI.
There have been slight performance improvements observed on network
centric workloads and an Intel team confirmed that this allows them
to power down a die completely on a mult-die socket for the first
time in a mostly idle scenario.
There is only one outstanding ~1.5% regression on a specific
overloaded netperf test which is currently investigated, but the
rest is either positive or neutral performance wise and positive on
the power management side.
- Fixes for the timekeeping interpolation code for cross-timestamps:
cross-timestamps are used for PTP to get snapshots from hardware
timers and interpolated them back to clock MONOTONIC. The changes
address a few corner cases in the interpolation code which got the
math and logic wrong.
- Simplifcation of the clocksource watchdog retry logic to
automatically adjust to handle larger systems correctly instead of
having more incomprehensible command line parameters.
- Treewide consolidation of the VDSO data structures.
- The usual small improvements and cleanups all over the place"
* tag 'timers-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
timer/migration: Fix quick check reporting late expiry
tick/sched: Fix build failure for CONFIG_NO_HZ_COMMON=n
vdso/datapage: Quick fix - use asm/page-def.h for ARM64
timers: Assert no next dyntick timer look-up while CPU is offline
tick: Assume timekeeping is correctly handed over upon last offline idle call
tick: Shut down low-res tick from dying CPU
tick: Split nohz and highres features from nohz_mode
tick: Move individual bit features to debuggable mask accesses
tick: Move got_idle_tick away from common flags
tick: Assume the tick can't be stopped in NOHZ_MODE_INACTIVE mode
tick: Move broadcast cancellation up to CPUHP_AP_TICK_DYING
tick: Move tick cancellation up to CPUHP_AP_TICK_DYING
tick: Start centralizing tick related CPU hotplug operations
tick/sched: Don't clear ts::next_tick again in can_stop_idle_tick()
tick/sched: Rename tick_nohz_stop_sched_tick() to tick_nohz_full_stop_tick()
tick: Use IS_ENABLED() whenever possible
tick/sched: Remove useless oneshot ifdeffery
tick/nohz: Remove duplicate between lowres and highres handlers
tick/nohz: Remove duplicate between tick_nohz_switch_to_nohz() and tick_setup_sched_timer()
hrtimer: Select housekeeping CPU during migration
...
|
||
Alexei Starovoitov
|
d7bca9199a |
mm: Introduce vmap_page_range() to map pages in PCI address space
ioremap_page_range() should be used for ranges within vmalloc range only.
The vmalloc ranges are allocated by get_vm_area(). PCI has "resource"
allocator that manages PCI_IOBASE, IO_SPACE_LIMIT address range, hence
introduce vmap_page_range() to be used exclusively to map pages
in PCI address space.
Fixes:
|
||
Jinyang He
|
199cc14cb4 |
LoongArch: Add kernel livepatching support
The arch-specified function ftrace_regs_set_instruction_pointer() has been implemented in arch/loongarch/include/asm/ftrace.h, so here only implement arch_stack_walk_reliable() function. Here are the test logs: [root@linux fedora]# cat /proc/cmdline BOOT_IMAGE=/vmlinuz-6.8.0-rc2 root=/dev/sda3 [root@linux fedora]# modprobe livepatch-sample [root@linux fedora]# cat /proc/cmdline this has been live patched [root@linux fedora]# echo 0 > /sys/kernel/livepatch/livepatch_sample/enabled [root@linux fedora]# rmmod livepatch_sample [root@linux fedora]# cat /proc/cmdline BOOT_IMAGE=/vmlinuz-6.8.0-rc2 root=/dev/sda3 [root@linux fedora]# dmesg -t | tail -5 livepatch: enabling patch 'livepatch_sample' livepatch: 'livepatch_sample': starting patching transition livepatch: 'livepatch_sample': patching complete livepatch: 'livepatch_sample': starting unpatching transition livepatch: 'livepatch_sample': unpatching complete Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
cb8a2ef084 |
LoongArch: Add ORC stack unwinder support
The kernel CONFIG_UNWINDER_ORC option enables the ORC unwinder, which is similar in concept to a DWARF unwinder. The difference is that the format of the ORC data is much simpler than DWARF, which in turn allows the ORC unwinder to be much simpler and faster. The ORC data consists of unwind tables which are generated by objtool. After analyzing all the code paths of a .o file, it determines information about the stack state at each instruction address in the file and outputs that information to the .orc_unwind and .orc_unwind_ip sections. The per-object ORC sections are combined at link time and are sorted and post-processed at boot time. The unwinder uses the resulting data to correlate instruction addresses with their stack states at run time. Most of the logic are similar with x86, in order to get ra info before ra is saved into stack, add ra_reg and ra_offset into orc_entry. At the same time, modify some arch-specific code to silence the objtool warnings. Co-developed-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Baoquan He
|
ea034d0b07 |
loongarch, crash: wrap crash dumping code into crash related ifdefs
Now crash codes under kernel/ folder has been split out from kexec code, crash dumping can be separated from kexec reboot in config items on loongarch with some adjustments. Here use IS_ENABLED(CONFIG_CRASH_RESERVE) check to decide if compiling in the crashkernel reservation code. Link: https://lkml.kernel.org/r/20240124051254.67105-15-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Pingfan Liu <piliu@redhat.com> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Michael Kelley <mhklinux@outlook.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Huacai Chen
|
9fa304b9f8 |
LoongArch: Call early_init_fdt_scan_reserved_mem() earlier
The unflatten_and_copy_device_tree() function contains a call to
memblock_alloc(). This means that memblock is allocating memory before
any of the reserved memory regions are set aside in the arch_mem_init()
function which calls early_init_fdt_scan_reserved_mem(). Therefore,
there is a possibility for memblock to allocate from any of the
reserved memory regions.
Hence, move the call to early_init_fdt_scan_reserved_mem() to be earlier
in the init sequence, so that the reserved memory regions are set aside
before any allocations are done using memblock.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Huacai Chen
|
752cd08da3 |
LoongArch: Update cpu_sibling_map when disabling nonboot CPUs
Update cpu_sibling_map when disabling nonboot CPUs by defining & calling clear_cpu_sibling_map(), otherwise we get such errors on SMT systems: jump label: negative count! WARNING: CPU: 6 PID: 45 at kernel/jump_label.c:263 __static_key_slow_dec_cpuslocked+0xec/0x100 CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 pc 90000000004c302c ra 90000000004c302c tp 90000001005bc000 sp 90000001005bfd20 a0 000000000000001b a1 900000000224c278 a2 90000001005bfb58 a3 900000000224c280 a4 900000000224c278 a5 90000001005bfb50 a6 0000000000000001 a7 0000000000000001 t0 ce87a4763eb5234a t1 ce87a4763eb5234a t2 0000000000000000 t3 0000000000000000 t4 0000000000000006 t5 0000000000000000 t6 0000000000000064 t7 0000000000001964 t8 000000000009ebf6 u0 9000000001f2a068 s9 0000000000000000 s0 900000000246a2d8 s1 ffffffffffffffff s2 ffffffffffffffff s3 90000000021518c0 s4 0000000000000040 s5 9000000002151058 s6 9000000009828e40 s7 00000000000000b4 s8 0000000000000006 ra: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 ERA: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1c (LIE=2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 Stack : 0000000000000000 900000000203f258 900000000179afc8 90000001005bc000 90000001005bf980 0000000000000000 90000001005bf988 9000000001fe0be0 900000000224c280 900000000224c278 90000001005bf8c0 0000000000000001 0000000000000001 ce87a4763eb5234a 0000000007f38000 90000001003f8cc0 0000000000000000 0000000000000006 0000000000000000 4c206e6f73676e6f 6f4c203a656d616e 000000000009ec99 0000000007f38000 0000000000000000 900000000214b000 9000000001fe0be0 0000000000000004 0000000000000000 0000000000000107 0000000000000009 ffffffffffafdabe 00000000000000b4 0000000000000006 90000000004c302c 9000000000224528 00005555939a0c7c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c ... Call Trace: [<9000000000224528>] show_stack+0x48/0x1a0 [<900000000179afc8>] dump_stack_lvl+0x78/0xa0 [<9000000000263ed0>] __warn+0x90/0x1a0 [<90000000017419b8>] report_bug+0x1b8/0x280 [<900000000179c564>] do_bp+0x264/0x420 [<90000000004c302c>] __static_key_slow_dec_cpuslocked+0xec/0x100 [<90000000002b4d7c>] sched_cpu_deactivate+0x2fc/0x300 [<9000000000266498>] cpuhp_invoke_callback+0x178/0x8a0 [<9000000000267f70>] cpuhp_thread_fun+0xf0/0x240 [<90000000002a117c>] smpboot_thread_fn+0x1dc/0x2e0 [<900000000029a720>] kthread+0x140/0x160 [<9000000000222288>] ret_from_kernel_thread+0xc/0xa4 Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
1001db6c42 |
LoongArch: Disable IRQ before init_fn() for nonboot CPUs
Disable IRQ before init_fn() for nonboot CPUs when hotplug, in order to silence such warnings (and also avoid potential errors due to unexpected interrupts): WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:4503 rcu_cpu_starting+0x214/0x280 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 pc 90000000048e3334 ra 90000000047bd56c tp 900000010039c000 sp 900000010039fdd0 a0 0000000000000001 a1 0000000000000006 a2 900000000802c040 a3 0000000000000000 a4 0000000000000001 a5 0000000000000004 a6 0000000000000000 a7 90000000048e3f4c t0 0000000000000001 t1 9000000005c70968 t2 0000000004000000 t3 000000000005e56e t4 00000000000002e4 t5 0000000000001000 t6 ffffffff80000000 t7 0000000000040000 t8 9000000007931638 u0 0000000000000006 s9 0000000000000004 s0 0000000000000001 s1 9000000006356ac0 s2 9000000007244000 s3 0000000000000001 s4 0000000000000001 s5 900000000636f000 s6 7fffffffffffffff s7 9000000002123940 s8 9000000001ca55f8 ra: 90000000047bd56c tlb_init+0x24c/0x528 ERA: 90000000048e3334 rcu_cpu_starting+0x214/0x280 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000000 (PPLV0 -PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071000 (LIE=12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 Stack : 0000000000000000 9000000006375000 9000000005b61878 900000010039c000 900000010039fa30 0000000000000000 900000010039fa38 900000000619a140 9000000006456888 9000000006456880 900000010039f950 0000000000000001 0000000000000001 cb0cb028ec7e52e1 0000000002b90000 9000000100348700 0000000000000000 0000000000000001 ffffffff916d12f1 0000000000000003 0000000000040000 9000000007930370 0000000002b90000 0000000000000004 9000000006366000 900000000619a140 0000000000000000 0000000000000004 0000000000000000 0000000000000009 ffffffffffc681f2 9000000002123940 9000000001ca55f8 9000000006366000 90000000047a4828 00007ffff057ded8 00000000000000b0 0000000000000000 0000000000000000 0000000000071000 ... Call Trace: [<90000000047a4828>] show_stack+0x48/0x1a0 [<9000000005b61874>] dump_stack_lvl+0x84/0xcc [<90000000047f60ac>] __warn+0x8c/0x1e0 [<9000000005b0ab34>] report_bug+0x1b4/0x280 [<9000000005b63110>] do_bp+0x2d0/0x480 [<90000000047a2e20>] handle_bp+0x120/0x1c0 [<90000000048e3334>] rcu_cpu_starting+0x214/0x280 [<90000000047bd568>] tlb_init+0x248/0x528 [<90000000047a4c44>] per_cpu_trap_init+0x124/0x160 [<90000000047a19f4>] cpu_probe+0x494/0xa00 [<90000000047b551c>] start_secondary+0x3c/0xc0 [<9000000005b66134>] smpboot_entry+0x50/0x58 Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Anna-Maria Behnsen
|
8d87d2cd1d |
LoongArch: vdso: Use generic union vdso_data_store
There is already a generic union definition for vdso_data_store in vdso datapage header. Use this definition to prevent code duplication. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20240219153939.75719-9-anna-maria@linutronix.de |
||
|
Huacai Chen
|
4551b30525 |
LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC]
With default config, the value of NR_CPUS is 64. When HW platform has more then 64 cpus, system will crash on these platforms. MAX_CORE_PIC is the maximum cpu number in MADT table (max physical number) which can exceed the supported maximum cpu number (NR_CPUS, max logical number), but kernel should not crash. Kernel should boot cpus with NR_CPUS, let the remainder cpus stay in BIOS. The potential crash reason is that the array acpi_core_pic[NR_CPUS] can be overflowed when parsing MADT table, and it is obvious that CORE_PIC should be corresponding to physical core rather than logical core, so it is better to define the array as acpi_core_pic[MAX_CORE_PIC]. With the patch, system can boot up 64 vcpus with qemu parameter -smp 128, otherwise system will crash with the following message. [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000420000004259, era == 90000000037a5f0c, ra == 90000000037a46ec [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.8.0-rc2+ #192 [ 0.000000] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 0.000000] pc 90000000037a5f0c ra 90000000037a46ec tp 9000000003c90000 sp 9000000003c93d60 [ 0.000000] a0 0000000000000019 a1 9000000003d93bc0 a2 0000000000000000 a3 9000000003c93bd8 [ 0.000000] a4 9000000003c93a74 a5 9000000083c93a67 a6 9000000003c938f0 a7 0000000000000005 [ 0.000000] t0 0000420000004201 t1 0000000000000000 t2 0000000000000001 t3 0000000000000001 [ 0.000000] t4 0000000000000003 t5 0000000000000000 t6 0000000000000030 t7 0000000000000063 [ 0.000000] t8 0000000000000014 u0 ffffffffffffffff s9 0000000000000000 s0 9000000003caee98 [ 0.000000] s1 90000000041b0480 s2 9000000003c93da0 s3 9000000003c93d98 s4 9000000003c93d90 [ 0.000000] s5 9000000003caa000 s6 000000000a7fd000 s7 000000000f556b60 s8 000000000e0a4330 [ 0.000000] ra: 90000000037a46ec platform_init+0x214/0x250 [ 0.000000] ERA: 90000000037a5f0c efi_runtime_init+0x30/0x94 [ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE) [ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 0.000000] ECFG: 00070800 (LIE=11 VS=7) [ 0.000000] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 0.000000] BADV: 0000420000004259 [ 0.000000] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____)) [ 0.000000] Stack : 9000000003c93a14 9000000003800898 90000000041844f8 90000000037a46ec [ 0.000000] 000000000a7fd000 0000000008290000 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 00000000019d8000 000000000f556b60 [ 0.000000] 000000000a7fd000 000000000f556b08 9000000003ca7700 9000000003800000 [ 0.000000] 9000000003c93e50 9000000003800898 9000000003800108 90000000037a484c [ 0.000000] 000000000e0a4330 000000000f556b60 000000000a7fd000 000000000f556b08 [ 0.000000] 9000000003ca7700 9000000004184000 0000000000200000 000000000e02b018 [ 0.000000] 000000000a7fd000 90000000037a0790 9000000003800108 0000000000000000 [ 0.000000] 0000000000000000 000000000e0a4330 000000000f556b60 000000000a7fd000 [ 0.000000] 000000000f556b08 000000000eaae298 000000000eaa5040 0000000000200000 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<90000000037a5f0c>] efi_runtime_init+0x30/0x94 [ 0.000000] [<90000000037a46ec>] platform_init+0x214/0x250 [ 0.000000] [<90000000037a484c>] setup_arch+0x124/0x45c [ 0.000000] [<90000000037a0790>] start_kernel+0x90/0x670 [ 0.000000] [<900000000378b0d8>] kernel_entry+0xd8/0xdc Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
5056c596c3 |
LoongArch/smp: Call rcutree_report_cpu_starting() at tlb_init()
Machines which have more than 8 nodes fail to boot SMP after commit |
||
|
Linus Torvalds
|
24fdd51899 |
Merge tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen: - Raise minimum clang version to 18.0.0 - Enable initial Rust support for LoongArch - Add built-in dtb support for LoongArch - Use generic interface to support crashkernel=X,[high,low] - Some bug fixes and other small changes - Update the default config file. * tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits) MAINTAINERS: Add BPF JIT for LOONGARCH entry LoongArch: Update Loongson-3 default config file LoongArch: BPF: Prevent out-of-bounds memory access LoongArch: BPF: Support 64-bit pointers to kfuncs LoongArch: Fix definition of ftrace_regs_set_instruction_pointer() LoongArch: Use generic interface to support crashkernel=X,[high,low] LoongArch: Fix and simplify fcsr initialization on execve() LoongArch: Let cores_io_master cover the largest NR_CPUS LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE LoongArch: Add a missing call to efi_esrt_init() LoongArch: Parsing CPU-related information from DTS LoongArch: dts: DeviceTree for Loongson-2K2000 LoongArch: dts: DeviceTree for Loongson-2K1000 LoongArch: dts: DeviceTree for Loongson-2K0500 LoongArch: Allow device trees be built into the kernel dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names dt-bindings: loongarch: Add Loongson SoC boards compatibles dt-bindings: loongarch: Add CPU bindings for LoongArch LoongArch: Enable initial Rust support ... |
||
|
Linus Torvalds
|
80955ae955 |
Merge tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are the set of driver core and kernfs changes for 6.8-rc1.
Nothing major in here this release cycle, just lots of small cleanups
and some tweaks on kernfs that in the very end, got reverted and will
come back in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues"
* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
class: fix use-after-free in class_register()
PM: clk: make pm_clk_add_notifier() take a const pointer
EDAC: constantify the struct bus_type usage
kernfs: fix reference to renamed function
driver core: device.h: fix Excess kernel-doc description warning
driver core: class: fix Excess kernel-doc description warning
driver core: mark remaining local bus_type variables as const
driver core: container: make container_subsys const
driver core: bus: constantify subsys_register() calls
driver core: bus: make bus_sort_breadthfirst() take a const pointer
kernfs: d_obtain_alias(NULL) will do the right thing...
driver core: Better advertise dev_err_probe()
kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
initramfs: Expose retained initrd as sysfs file
fs/kernfs/dir: obey S_ISGID
kernel/cgroup: use kernfs_create_dir_ns()
...
|
||
|
Linus Torvalds
|
09d1c6a80f |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
|
||
Youling Tang
|
78de91b458 |
LoongArch: Use generic interface to support crashkernel=X,[high,low]
LoongArch already supports two crashkernel regions in kexec-tools, so we
can directly use the common interface to support crashkernel=X,[high,low]
after commit
|
||
Xi Ruoyao
|
c239665130 |
LoongArch: Fix and simplify fcsr initialization on execve()
There has been a lingering bug in LoongArch Linux systems causing some
GCC tests to intermittently fail (see Closes link). I've made a minimal
reproducer:
zsh% cat measure.s
.align 4
.globl _start
_start:
movfcsr2gr $a0, $fcsr0
bstrpick.w $a0, $a0, 16, 16
beqz $a0, .ok
break 0
.ok:
li.w $a7, 93
syscall 0
zsh% cc mesaure.s -o measure -nostdlib
zsh% echo $((1.0/3))
0.33333333333333331
zsh% while ./measure; do ; done
This while loop should not stop as POSIX is clear that execve must set
fenv to the default, where FCSR should be zero. But in fact it will
just stop after running for a while (normally less than 30 seconds).
Note that "$((1.0/3))" is needed to reproduce this issue because it
raises FE_INVALID and makes fcsr0 non-zero.
The problem is we are currently relying on SET_PERSONALITY2() to reset
current->thread.fpu.fcsr. But SET_PERSONALITY2() is executed before
start_thread which calls lose_fpu(0). We can see if kernel preempt is
enabled, we may switch to another thread after SET_PERSONALITY2() but
before lose_fpu(0). Then bad thing happens: during the thread switch
the value of the fcsr0 register is stored into current->thread.fpu.fcsr,
making it dirty again.
The issue can be fixed by setting current->thread.fpu.fcsr after
lose_fpu(0) because lose_fpu() clears TIF_USEDFPU, then the thread
switch won't touch current->thread.fpu.fcsr.
The only other architecture setting FCSR in SET_PERSONALITY2() is MIPS.
I've ran a similar test on MIPS with mainline kernel and it turns out
MIPS is buggy, too. Anyway MIPS do this for supporting different FP
flavors (NaN encodings, etc.) which do not exist on LoongArch. So for
LoongArch, we can simply remove the current->thread.fpu.fcsr setting
from SET_PERSONALITY2() and do it in start_thread(), after lose_fpu(0).
The while loop failing with the mainline kernel has survived one hour
after this change on LoongArch.
Fixes:
|
||
|
Huacai Chen
|
ce68ff3528 |
LoongArch: Let cores_io_master cover the largest NR_CPUS
Now loongson_system_configuration::cores_io_master only covers 64 cpus, if NR_CPUS > 64 there will be memory corruption. So let cores_io_master cover the largest NR_CPUS (256). Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
d23b77953f |
LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE
LoongArch has hardware page coloring for L1 Cache, so we don't have cache aliases. But SFB (Store Fill Buffer) still has aliases. So we define SHMLBA to SZ_64K previously. But there are losts of applications use PAGE_SIZE rather than SHMLBA to mmap() file pages and shared pages. Of course we can fix them one by one, but not easy. On the other hand, we can simply disable SFB for 4KB page size to fix cache alias (there will be performance decrease, but acceptable), and in future we will fix SFB in hardware. So we can safely define SHMLBA to PAGE_SIZE (use the generic shmparam.h) to make life easier. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
9499daeade |
LoongArch: Add a missing call to efi_esrt_init()
ESRT (EFI System Resource Table) is needed for UEFI's "Capsule Update" feature. But ESRT initialization is missing on LoongArch now, so add a call to efi_esrt_init() at the end of efi_init(). Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Binbin Zhou
|
44a01f1f72 |
LoongArch: Parsing CPU-related information from DTS
Generally, we can get cpu-related information, such as model name, from /proc/cpuinfo. For FDT-based systems, we need to parse the relevant information from DTS. BTW, set loongson_sysconf.cores_per_package to num_processors if SMBIOS doesn't provide a valid number (usually FDT-based systems). Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Binbin Zhou
|
5f346a6e59 |
LoongArch: Allow device trees be built into the kernel
During the upstream progress of those DT-based drivers, DT properties are changed a lot so very different from those in existing bootloaders. It is inevitably that some existing systems do not provide a standard, canonical device tree to the kernel at boot time. So let's provide a device tree table in the kernel, keyed by the dts filename, containing the relevant DTBs. We can use the built-in dts files as references. Each SoC has only one built-in dts file which describes all possible device information of that SoC, so the dts files are good examples during development. And as a reference, our built-in dts file only enables the most basic bootable combinations (so it is generic enough), acts as an alternative in case the dts in the bootloader is unexpected. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Linus Torvalds
|
c299010061 |
Merge tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann: "A series from Baoquan He cleans up the asm-generic/io.h to remove the ioremap_uc() definition from everything except x86, which still needs it for pre-PAT systems. This series notably contains a patch from Jiaxun Yang that converts MIPS to use asm-generic/io.h like every other architecture does, enabling future cleanups. Some of my own patches fix -Wmissing-prototype warnings in architecture specific code across several architectures. This is now needed as the warning is enabled by default. There are still some remaining warnings in minor platforms, but the series should catch most of the widely used ones make them more consistent with one another. David McKay fixes a bug in __generic_cmpxchg_local() when this is used on 64-bit architectures. This could currently only affect parisc64 and sparc64. Additional cleanups address from Linus Walleij, Uwe Kleine-König, Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies between architectures" * tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: Fix 32 bit __generic_cmpxchg_local Hexagon: Make pfn accessors statics inlines ARC: mm: Make virt_to_pfn() a static inline mips: remove extraneous asm-generic/iomap.h include sparc: Use $(kecho) to announce kernel images being ready arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes csky: fix arch_jump_label_transform_static override arch: add do_page_fault prototypes arch: add missing prepare_ftrace_return() prototypes arch: vdso: consolidate gettime prototypes arch: include linux/cpu.h for trap_init() prototype arch: fix asm-offsets.c building with -Wmissing-prototypes arch: consolidate arch_irq_work_raise prototypes hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr() mips: io: remove duplicated codes arch/*/io.h: remove ioremap_uc in some architectures mips: add <asm-generic/io.h> including |
||
|
Linus Torvalds
|
78273df7f6 |
Merge tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs
Pull header cleanups from Kent Overstreet: "The goal is to get sched.h down to a type only header, so the main thing happening in this patchset is splitting out various _types.h headers and dependency fixups, as well as moving some things out of sched.h to better locations. This is prep work for the memory allocation profiling patchset which adds new sched.h interdepencencies" * tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits) Kill sched.h dependency on rcupdate.h kill unnecessary thread_info.h include Kill unnecessary kernel.h include preempt.h: Kill dependency on list.h rseq: Split out rseq.h from sched.h LoongArch: signal.c: add header file to fix build error restart_block: Trim includes lockdep: move held_lock to lockdep_types.h sem: Split out sem_types.h uidgid: Split out uidgid_types.h seccomp: Split out seccomp_types.h refcount: Split out refcount_types.h uapi/linux/resource.h: fix include x86/signal: kill dependency on time.h syscall_user_dispatch.h: split out *_types.h mm_types_task.h: Trim dependencies Split out irqflags_types.h ipc: Kill bogus dependency on spinlock.h shm: Slim down dependencies workqueue: Split out workqueue_types.h ... |
||
|
Linus Torvalds
|
a7e4c6cf5b |
Merge tag 'efi-next-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel: - Fix a syzbot reported issue in efivarfs where concurrent accesses to the file system resulted in list corruption - Add support for accessing EFI variables via the TEE subsystem (and a trusted application in the secure world) instead of via EFI runtime firmware running in the OS's execution context - Avoid linker tricks to discover the image base on LoongArch * tag 'efi-next-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: memmap: fix kernel-doc warnings efi/loongarch: Directly position the loaded image file efivarfs: automatically update super block flag efi: Add tee-based EFI variable driver efi: Add EFI_ACCESS_DENIED status code efi: expose efivar generic ops register function efivarfs: Move efivarfs list into superblock s_fs_info efivarfs: Free s_fs_info on unmount efivarfs: Move efivar availability check into FS context init efivarfs: force RO when remounting if SetVariable is not supported |
||
|
Linus Torvalds
|
fb46e22a9e |
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
||
Randy Dunlap
|
c968b99f86 |
LoongArch: signal.c: add header file to fix build error
loongarch's signal.c uses rseq_signal_deliver() so it should
pull in the appropriate header to prevent a build error:
../arch/loongarch/kernel/signal.c: In function 'handle_signal':
../arch/loongarch/kernel/signal.c:1034:9: error: implicit declaration of function 'rseq_signal_deliver' [-Werror=implicit-function-declaration]
1034 | rseq_signal_deliver(ksig, regs);
| ^~~~~~~~~~~~~~~~~~~
Fixes:
|
||
Andrew Morton
|
a721aeac8b | sync mm-stable with mm-hotfixes-stable to pick up depended-upon changes | ||
Wang Yao
|
174a0c565c |
efi/loongarch: Directly position the loaded image file
The use of the 'kernel_offset' variable to position the image file that has been loaded by UEFI or GRUB is unnecessary, because we can directly position the loaded image file through using the image_base field of the efi_loaded_image struct provided by UEFI. Replace kernel_offset with image_base to position the image file that has been loaded by UEFI or GRUB. Signed-off-by: Wang Yao <wangyao@lemote.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
Tianrui Zhao
|
118e10cd89 |
LoongArch: KVM: Add LASX (256bit SIMD) support
This patch adds LASX (256bit SIMD) support for LoongArch KVM. There will be LASX exception in KVM when guest use the LASX instructions. KVM will enable LASX and restore the vector registers for guest and then return to guest to continue running. Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tianrui Zhao
|
db1ecca22e |
LoongArch: KVM: Add LSX (128bit SIMD) support
This patch adds LSX (128bit SIMD) support for LoongArch KVM. There will be LSX exception in KVM when guest use the LSX instructions. KVM will enable LSX and restore the vector registers for guest and then return to guest to continue running. Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Linus Torvalds
|
a62aa88ba1 |
Merge tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton: "17 hotfixes. 8 are cc:stable and the other 9 pertain to post-6.6 issues" * tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/mglru: reclaim offlined memcgs harder mm/mglru: respect min_ttl_ms with memcgs mm/mglru: try to stop at high watermarks mm/mglru: fix underprotected page cache mm/shmem: fix race in shmem_undo_range w/THP Revert "selftests: error out if kernel header files are not yet built" crash_core: fix the check for whether crashkernel is from high memory x86, kexec: fix the wrong ifdeffery CONFIG_KEXEC sh, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC mips, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC m68k, kexec: fix the incorrect ifdeffery and build dependency of CONFIG_KEXEC loongarch, kexec: change dependency of object files mm/damon/core: make damon_start() waits until kdamond_fn() starts selftests/mm: cow: print ksft header before printing anything else mm: fix VMA heap bounds checking riscv: fix VMALLOC_START definition kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMP |
||
|
Baoquan He
|
655fc6cd45 |
loongarch, kexec: change dependency of object files
Patch series "kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC". The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be dropped, then compiling errors will be triggered if below config items are set: === CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y === E.g on mips, below link error are seen: -------------------------------------------------------------------- mipsel-linux-ld: kernel/kexec_core.o: in function `kimage_free': kernel/kexec_core.c:(.text+0x2200): undefined reference to `machine_kexec_cleanup' mipsel-linux-ld: kernel/kexec_core.o: in function `__crash_kexec': kernel/kexec_core.c:(.text+0x2480): undefined reference to `machine_crash_shutdown' mipsel-linux-ld: kernel/kexec_core.c:(.text+0x2488): undefined reference to `machine_kexec' mipsel-linux-ld: kernel/kexec_core.o: in function `kernel_kexec': kernel/kexec_core.c:(.text+0x29b8): undefined reference to `machine_shutdown' mipsel-linux-ld: kernel/kexec_core.c:(.text+0x29c0): undefined reference to `machine_kexec' -------------------------------------------------------------------- Here, change the incorrect dependency of building kexec_core related object files, and the ifdeffery on architectures from CONFIG_KEXEC to CONFIG_KEXEC_CORE. Testing: ======== Passed on mips and loognarch with the LKP reproducer. This patch (of 5): Currently, in arch/loongarch/kernel/Makefile, building machine_kexec.o relocate_kernel.o depends on CONFIG_KEXEC. Whereas, since we will drop the select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec, compiling error will be triggered if below config items are set: === CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y === --------------------------------------------------------------- loongarch64-linux-ld: kernel/kexec_core.o: in function `.L209': >> kexec_core.c:(.text+0x1660): undefined reference to `machine_kexec_cleanup' loongarch64-linux-ld: kernel/kexec_core.o: in function `.L287': >> kexec_core.c:(.text+0x1c5c): undefined reference to `machine_crash_shutdown' >> loongarch64-linux-ld: kexec_core.c:(.text+0x1c64): undefined reference to `machine_kexec' loongarch64-linux-ld: kernel/kexec_core.o: in function `.L2^B5': >> kexec_core.c:(.text+0x2090): undefined reference to `machine_shutdown' loongarch64-linux-ld: kexec_core.c:(.text+0x20a0): undefined reference to `machine_kexec' --------------------------------------------------------------- Here, change the dependency of machine_kexec.o relocate_kernel.o to CONFIG_KEXEC_CORE can fix above building error. Link: https://lkml.kernel.org/r/20231208073036.7884-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20231208073036.7884-2-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311300946.kHE9Iu71-lkp@intel.com/ Cc: Eric DeVolder <eric_devolder@yahoo.com> Cc: Ignat Korchagin <ignat@cloudflare.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Liam Ni
|
ff6c3d81f2 |
NUMA: optimize detection of memory with no node id assigned by firmware
Sanity check that makes sure the nodes cover all memory loops over numa_meminfo to count the pages that have node id assigned by the firmware, then loops again over memblock.memory to find the total amount of memory and in the end checks that the difference between the total memory and memory that covered by nodes is less than some threshold. Worse, the loop over numa_meminfo calls __absent_pages_in_range() that also partially traverses memblock.memory. It's much simpler and more efficient to have a single traversal of memblock.memory that verifies that amount of memory not covered by nodes is less than a threshold. Introduce memblock_validate_numa_coverage() that does exactly that and use it instead of numa_meminfo_cover_memory(). Link: https://lkml.kernel.org/r/20231026020329.327329-1-zhiguangni01@gmail.com Signed-off-by: Liam Ni <zhiguangni01@gmail.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Bibo Mao <maobibo@loongson.cn> Cc: Binbin Zhou <zhoubinbin@loongson.cn> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Feiyang Chen <chenfeiyang@loongson.cn> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: WANG Xuerui <kernel@xen0n.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Jinyang He
|
97ceddbc94 |
LoongArch: Set unwind stack type to unknown rather than set error flag
During unwinding, unwind_done() is used as an end condition. Normally it unwind to the user stack and then set the stack type to unknown, which is a normal exit. When something unexpected happens in unwind process and we cannot unwind anymore, we should set the error flag, and also set the stack type to unknown to indicate that the unwind process can not continue. The error flag emphasizes that the unwind process produce an unexpected error. There is no unexpected things when we unwind the PT_REGS in the top of IRQ stack and find out that is an user mode PT_REGS. Thus, we should not set error flag and just set stack type to unknown. Reported-by: Hengqi Chen <hengqi.chen@gmail.com> Acked-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |