Pull staging updates from Greg KH:
"Here is the big staging patch set for 3.18-rc1.
Once again, we are deleting more code than we added, with something
like 150000 lines deleted overall. Some of this is due to drivers
being added to the networking tree, so the old versions are removed
here, but even then, the overall difference is quite good.
Other than driver deletions, lots and lots and lots of minor cleanups
all over the place. Full details are in the changelog"
* tag 'staging-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1481 commits)
staging: et131x: Remove et131x driver from drivers/staging
staging: emxx_udc: Use min_t instead of min
staging: emxx_udc: Fix replace printk(KERN_DEBUG ..) with dev_dbg
staging: media: Fixed else after return or break warning
staging: media: omap4iss: Fixed else after return or break warning
staging: rtl8712: Fixed else not required after return
staging: rtl8712: Fix missing blank line warning
staging: rtl8192e: rtl8192e: Remove spaces before the semicolons
staging: rtl8192e: rtl8192e: Remove unnecessary return statements
staging: rtl8192e: Remove unneeded void return
staging: rtl8192e: Fix void function return statements style
staging: rtl8712: Fix unnecessary parentheses style warning
staging: rtl8192e: Fix unnecessary space before function pointer arguments
staging: rtl8192e: Array was made static const char * const
staging: ft1000: ft1000-usb: Removed unnecessary else statement.
staging: ft1000: ft1000-usb: Removed unnecessary else statement.
staging: ft1000: ft1000-usb: Removed unnecessary parentheses.
staging: ft1000: ft1000-usb: Added new line after declarations.
staging: vt6655: Fixed C99 // comment errors in wpactl.c
staging: speakup: Fixed warning <linux/serial.h> instead of <asm/serial.h>
...
Pull module update from Rusty Russell:
"Nothing major: support for compressing modules, and auto-tainting
params.
PS. My virtio-next tree is empty: DaveM took the patches I had. There
might be a virtio-rng starvation fix, but so far it's a bit voodoo
so I will get to that in the next two days or it will wait"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
moduleparam: Resolve missing-field-initializer warning
kbuild: handle module compression while running 'make modules_install'.
modinst: wrap long lines in order to enhance cmd_modules_install
modsign: lookup lines ending in .ko in .mod files
modpost: simplify file name generation of *.mod.c files
modpost: reduce visibility of symbols and constify r/o arrays
param: check for tainting before calling set op.
drm/i915: taint the kernel if unsafe module parameters are set
module: add module_param_unsafe and module_param_named_unsafe
module: make it possible to have unsafe, tainting module params
module: rename KERNEL_PARAM_FL_NOARG to avoid confusion
The translation from the X driver to the KMS one typo'ed a couple
of array indices, causing the HW cursor to look weird (blocky with
leaking edge colors). This fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
IPUv3 fixes for v3.18
* tag 'ipu-fixes-3.18' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-v3: Kconfig: Remove SOC_IMX6SL from IMX_IPUV3_CORE Kconfig
gpu: ipu-v3: ipu-smfc: Do not leave DEBUG defined
gpu: ipu-v3: Return proper error on ipu_add_client_devices error path
gpu: ipu-v3: Select GENERIC_IRQ_CHIP to fix build error
two core fixes
* tag 'topic/core-stuff-2014-10-03' of git://anongit.freedesktop.org/drm-intel:
drm/core: use helper to check driver features
drm/edid: Add missing interlaced flag to 576i@100 modes.
Bunch of fixes for 3.18. Major parts:
- ppgtt fixes (but full ppgtt is for 3.19) from Chris, Michel, ...
- hdmi pixel replication fixes (Clint Taylor)
- leftover i830M patches from Ville
- small things all over
* tag 'drm-intel-next-fixes-2014-10-03' of git://anongit.freedesktop.org/drm-intel: (21 commits)
drm/i915: Enable pixel replicated modes on BDW and HSW.
drm/i915: Don't spam dmesg with rps messages on vlv/chv
drm/i915: Do not leak pages when freeing userptr objects
drm/i915: Do not store the error pointer for a failed userptr registration
Revert "drm/i915/bdw: BDW Software Turbo"
drm/i915/bdw: Cleanup pre prod workarounds
drm/i915: Use EIO instead of EAGAIN for sink CRC error.
drm/i915: Extend BIOS stolen mem handling to all platform
drm/i915: Match GTT space sanity checker with implementation
drm/i915: HSW always use GGTT selector for secure batches
drm/i915: add cherryview specfic forcewake in execlists_elsp_write
drm/i915: fix another use-after-free in i915_gem_evict_everything
drm/i915: Don't reinit hpd interrupts after gpu reset
drm/i915: Wrap -EIO send-vblank event for failed pageflip in spinlock
drm/i915: Drop any active reference before unbinding
drm/i915: Objects on the unbound list may still have an active reference
drm/i915/edp: use lane count and link rate from DPCD for eDP
drm/i915/dp: add missing \n in the TPS3 debug message
drm/i915/hdmi, dp: Do not dereference the encoder in the connector destroy
drm/i915: Limit the watermark to at least 8 entries on gen2/3
...
Move the duplicated DIV_ROUND_CLOSEST_ULL macro into the intel_drv.h
header file so that it can be shared between intel_display.c
and intel_panel.c.
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Reviewed-By: Joe Konno <joe.konno@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Improper truncated integer division in the scale() function causes
actual_brightness != brightness. This (partial) work-around should be
sufficient for a majority of use-cases, but it is by no means a complete
solution.
TODO: Determine how best to scale "user" values to "hw" values, and
vice-versa, when the ranges are of different sizes. That would be a
buggy scenario even with this work-around.
The issue was introduced in the following (v3.17-rc1) commit:
6dda730 drm/i915: respect the VBT minimum backlight brightness
Note that for easier backporting this commit adds a duplicated macro.
A follow-up cleanup patch rectifies this for 3.18+
v2: (thanks to Chris Wilson) clarify commit message, use rounded division
macro
v3: -DIV_ROUND_CLOSEST() fails to build with CONFIG_X86_32=y. (Jani)
-Use DIV_ROUND_CLOSEST_ULL() instead. (Damien)
-v1 and v2 originally authored by Joe Konno.
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Cc: stable@vger.kernel.org
Reviewed-By: Joe Konno <joe.konno@intel.com>
[danvet: Add backporting note.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull drm fixes from Dave Airlie:
"Nothing too major or scary.
One i915 regression fix, nouveau has a tmds regression fix, along with
a regression fix for the runtime pm code for optimus laptops not
restoring the display hw correctly"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: make sure display hardware is reinitialised on runtime resume
drm/nouveau: punt fbcon resume out to a workqueue
drm/nouveau: fix regression on original nv50 board
drm/nv50/disp: fix dpms regression on certain boards
drm/i915: Flush the PTEs after updating them before suspend
final regression fix for 3.17.
* tag 'drm-intel-fixes-2014-10-02' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Flush the PTEs after updating them before suspend
Linus commit 05c63c2ff2 modified the
runtime suspend/resume paths to skip over display-related tasks to
avoid locking issues on resume.
Unfortunately, this resulted in the display hardware being left in
a partially initialised state, preventing subsequent modesets from
completing.
This commit unifies the (many) suspend/resume paths, bringing back
display (and fbcon) handling in the runtime paths.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Preparation for some runtime pm fixes. Currently we skip over fbcon
suspend/resume in the runtime path, which causes issues on resume if
fbcon tries to write to the framebuffer before the BAR subdev has
been resumed to restore the BAR1 VM setup.
As we might be woken up via a sysfs connector, we are unable to call
fb_set_suspend() in the resume path as it could make its way down to
a modeset and cause all sorts of locking hilarity.
To solve this, we'll just delay the fbcon resume to a workqueue.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Xorg (and any non-DRM client really) doesn't have permission to directly
touch VRAM on nv50 and up, which the fence code prior to g84 depends on.
It's less invasive to temporarily grant it premission to do so, as it
previously did, than it is to rework fencenv50 to use the VM. That
will come later on.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
legacy_connector_convert is used in radeon_combios.c only, so declare it as static.
Signed-off-by: Michele Curti <michele.curti@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The tables:
* supported_devices_connector_convert
* supported_devices_connector_object_id_convert
* object_connector_convert
are used in redeon_atombios.c only, so declare them as static.
Signed-off-by: Michele Curti <michele.curti@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This should allow the audio driver to get a better
idea of whether the sink is connected or not.
v2: fix copy/paste typo noticed by David Henningsson
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most of that functionality is only used by r600_hdmi.c
and I'm planning to change that further.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fixups for nouveau and fencing
* 'for-airlied-next' of git://people.freedesktop.org/~mlankhorst/linux:
drm/nouveau: export reservation_object from dmabuf to ttm
drm/ttm: add reservation_object as argument to ttm_bo_init
drm: Pass dma-buf as argument to gem_prime_import_sg_table
drm/nouveau: assign fence_chan->name correctly
drm/nouveau: specify if interruptible wait is desired in nouveau_fence_sync
drm/nouveau: bump driver patchlevel to 1.2.1
Ok, here's the update core-stuff pull request with the locking fixup patch
fixed up with another patch.
* tag 'topic/core-stuff-2014-09-29' of git://anongit.freedesktop.org/drm-intel:
drm: Drop grab fpriv->fbs_lock in drm_fb_release
drm/udl: use container_of to resolve udl_fbdev from drm_fb_helper
drm/ast: use container_of to resolve ast_fbdev from drm_fb_helper
drm/gma500: use container_of to resolve psb_fbdev from drm_fb_helper
drm/qxl: use container_of to resolve qxl_fbdev from drm_fb_helper
drm/nouveau: use container_of to resolve nouveau_plane from drm_plane
drm/nouveau: use container_of to resolve nouveau_fbdev from drm_fb_helper
drm/radeon: use container_of to resolve radeon_fbdev from drm_fb_helper
drm/mgag200: use container_of to resolve mga_fbdev from drm_fb_helper
drm/cirrus: use container_of to resolve cirrus_fbdev from drm_fb_helper
drm: Improve debug output for drm_wait_one_vblank
drm: Fixup locking for universal cursor planes
drm: Don't update vblank timestamp when the counter didn't change
Haswell and later silicon has added a new pixel replication register
to the pipe timings for each transcoder. Now in addition to the
DPLL_A_MD register for the pixel clock double, we also need to write
to the TRANS_MULT_n (0x6002c) register to double the pixel data. Writing
to the DPLL only double the pixel clock.
ver2: Macro name change from MULTIPLY to PIPE_MULTI. (Daniel)
ver3: Do not set pixel multiplier if transcoder is eDP (Ville)
ver4: Macro name change to PIPE_MULT and default else pixel_multiplier
Cc: Ville =?iso-8859-1?Q?Syrj=E4l=E4?= <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Appease checkpatch and move one hunk back into the right
place that git am misplace!?]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make nouveau_fence_chan refcounted, to make trace_fence_destroy
always return the correct name without a race condition.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
This fixes a regression introduced by "drm/nouveau: rework to new fence interface"
(commit 29ba89b237).
The fence sequence should not be reset after creation, the old value is used instead.
On destruction the final value is written, to prevent another source of accidental
wraparound in case of a channel being destroyed after a hang, and unblocking any other
channel that may wait on the about-to-be-deleted channel to signal.
I'm nothing if not optimistic about any hope of recovery from that. ;-)
Reported-by: Ted Percival <ted@tedp.id.au>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Ted Percival <ted@tedp.id.au>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some of the Thinkpads' firmware will issue a backlight change request
through i915 operation region unconditionally on AC plug/unplug, the
backlight level used is arbitrary and thus should be ignored. This is
handled by commit 0b9f7d93ca (ACPI / i915: ignore firmware requests
for backlight change). Then there is a Dell laptop whose vendor backlight
interface also makes use of operation region to change backlight level
and with the above commit, that interface no long works. The condition
used to ignore the backlight change request from firmware is thus
changed to: if the vendor backlight interface is not in use and the ACPI
backlight interface is broken, we ignore the requests; oterwise, we keep
processing them.
Fixes: 0b9f7d93ca (ACPI / i915: ignore firmware requests for backlight change)
Link: https://lkml.org/lkml/2014/9/23/854
Reported-and-tested-by: Pali Rohár <pali.rohar@gmail.com>
Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
