[Why & How]
Check always_match_dpcd_with_hw_lane_settings bit before
overriding the DP drive settings
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enrich the log to provide more informatio in MST payload update.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Use dc_is_hdmi_signal to determine signal type.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Logging for SMU response value after the wait allows us to know
immediately what the response value was. Makes it easier to debug should
the value be anything other than OK.
[HOW]
Using the the already available DC SMU logging functions.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
For VG, we want to turn off power/backlight of the intenral panel when
plugging in external monitor and going to "external monitor only" mode.
[how]
For turning off power of the internal panel, ignore the config flag whic
bypasses power sequencing for eDP panels.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Only on VG, if external display is disconnected during S3 suspend, the
internal panel doesn't light up on resume because we set the power state
using an unsupported DPCD register SET_POWER. To check the register is
supported, we need to check SET_POWER_CAPABLE first which is
eDP-specific DPCD register field.
[how]
Check the SET_POWER_CAPABLE register field and decide the control of the
eDP power state based on the read register value.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Agustin Gutierrez <Agustin.Gutierrez@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
when connect one 4k@144hz dp to dsc mst hub, 4k@144hz mode is in valid
mode list. but some mst hub port output bandwidth does not support
4k@144hz.
[How]
add mst port output bandwidth checks, include full_pbn, branch max
throughput mps.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Delete unnecessary codes in detect_link_and_local_sink. We already have
correct stop logic in dc_link_detect.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While updating the config of hdcp, we use the sink_singal type of the
dc_sink to decide the HDCP operation mode. However, it doesn't consider
the case when the sink is a emulated one.
[How]
Take dc_em_sink into account while updating HDCP config.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Observe that we have several problems while releasing remote dc_sink
under mst cases.
- When unplug mst branch device from the source, we now try to free all
remote dc_sinks in dm_helpers_dp_mst_stop_top_mgr(). However, there are
bugs while we're releasing dc_sinks here. First of all,
link->remote_sinks[] array get shuffled within
dc_link_remove_remote_sink(). As the result, increasing the array index
within the releasing loop is wrong. Secondly, it tries to call
dc_sink_release() to release the dc_sink of the same aconnector every
time in the loop. Which can't release dc_sink of all aconnector in the
mst topology.
- There is no code path for us to release remote dc_sink for disconnected
sst monitor which unplug event is notified by CSN sideband message. Which
means we'll use stale dc_sink data to represent later on connected
monitor. Also, has chance to break the maximum remote dc_sink number
constraint.
[How]
Distinguish unplug event of mst scenario into 2 cases.
* Unplug sst/legacy stream sink off the mst topology
- Release related remote dc_sink in detec_ctx().
* Unplug mst branch device off the mst topology
- Release related remote dc_sink in early_unregister()
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3c4d55c9b9.
Revert the commit because:
- It's incomplete of the function dm_set_dpms_off() for mst case. For
stream sinks whithin the same mst topology, they share the same dc_link.
dm_set_dpms_off() tries to update one mst stream only which is
incomplete.
- Setting dpms off should be triggered by usermode. Besdies, it seems
usermode does release relevant resource for mst & non-mst case when
unplug connecotr now.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 035f54969b.
The reverted commit was trying to fix side effect brought by
commit 3c4d55c9b9 ("drm/amd/display: turn DPMS off on connector unplug")
However,
* This reverted commit will have mst case never call dm_set_dpms_off()
which conflicts the idea of original commit 3c4d55c9b9 ("drm/amd/display: turn DPMS off on connector unplug")
That's due to dm_crtc_state is always null since the input parameter
aconnector is the root device (source) of mst topology. It's not an
end stream sink within the mst topology.
* Setting dpms off should be triggered by usermode. Besdies, it seems
usermode does release relevant resource for mst & non-mst case when
unplug connecotr now. Which means we no longer need both commits now:
commit 3c4d55c9b9 ("drm/amd/display: turn DPMS off on connector unplug")
commit 035f54969b ("drm/amd/display: Add flag to detect dpms force off during HPD")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A variety of Lenovo machines with Rembrandt APUs and OLED panels have
stopped showing the display at login. This behavior clears up after
leaving it idle and moving the mouse or touching keyboard.
It was bisected to be caused by commit 559e265522 ("drm/amd/display:
keep eDP Vdd on when eDP stream is already enabled"). Revert this commit
to fix the issue.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2047
Reported-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: 559e265522 ("drm/amd/display: keep eDP Vdd on when eDP stream is already enabled")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mark Pearson <markpearson@lenovo.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds LSDMA ip block for LSDMA v6.0.1.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some APUs with SMU13 are showing the following message:
`amdgpu 0000:63:00.0: amdgpu: Unexpected and unhandled version: 3.1`
This warning isn't relevant for smu info 3.1, as no bootup information
is present in the table.
Fixes: 593a54f180 ("drm/amd/pm: correct the way for retrieving bootup clocks")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set mp1 unload state will cause the SMC FW can't accept any SMU message,
skip to set mp1 unload state to avoid following case fail:
- runtime pm case.
- gpu reset case.
Fixes: 72aeb6ee0c ("drm/amd/pm: fix driver reload SMC firmware fail issue for smu13")
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to gfxoff on, cpu accessing registers is not expected.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The EccInfo_t struct in driver_if.h is as below in official release
verion 68.55.0
typedef struct {
uint64_t mca_umc_status;
uint64_t mca_umc_addr;
uint16_t ce_count_lo_chip;
uint16_t ce_count_hi_chip;
uint32_t eccPadding;
uint64_t mca_ceumc_addr;
} EccInfo_t;
It's different from the debug version druing develop print correctable
error address, so adjust EccInfo_t struct.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Certain GL unit tests for large textures can cause problems
with the OOM killer since there is no way to link this memory
to a process. This was originally mitigated (but not necessarily
eliminated) by limiting the GTT size. The problem is this limit
is often too low for many modern games so just make the limit 1/2
of system memory. The OOM accounting needs to be addressed, but
we shouldn't prevent common 3D applications from being usable
just to potentially mitigate that corner case.
Set default GTT size to max(3G, 1/2 of system ram) by default.
v2: drop previous logic and default to 3/4 of ram
v3: default to half of ram to align with ttm
v4: fix spelling in comment (Kent)
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1942
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Loop through all VMIDs for gmc_v10_0_flush_gpu_tlb_pasid and
gmc_v11_0_flush_gpu_tlb_pasid (only if using MES for gmc_v10). This is
required for MES due to use_different_vmid_compute causing SDMA queues
to be assigned different VMIDs than compute for the same PASID.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixed some errors and warnings found by checkpatch.pl.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- remove multiple queue support
- add unified queue related functions
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CXL specification defines these as little endian.
Fixes: 60b8f17215 ("cxl/pmem: Translate NVDIMM label commands to CXL label commands")
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/20220225221456.1025635-1-alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Save some characters and directly check decoder type rather than port
type. There's no need to check if the port is an endpoint port since, by
this point, cxl_endpoint_decoder_alloc() has a specified type.
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The device is created, and then there is a check if a driver succesfully
bound to it. In event of failing the bind (e.g. failure in cxl_port_probe())
the device is left registered. When a bus rescan later occurs, fresh
devices are created leading to a multiple device representing the same
underlying hardware. Bad things may follow and at very least we have far too many
devices.
Fix by ensuring autoremove is registered if the device create succeeds,
but doesn't depend on sucessful binding to a driver.
Bug was observed as side effect of incorrect ownership in
[PATCH v9 6/9] cxl/port: Read CDAT table
but will result from any failure to in cxl_port_probe().
Fixes: 8dd2bc0f8e ("cxl/mem: Add the cxl_mem driver")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220609134519.11668-1-Jonathan.Cameron@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In current implementation ice_update_phy_type enables all link modes
for selected speed. This approach doesn't work for 1000M speeds,
because both copper (1000baseT) and optical (1000baseX) standards
cannot be enabled at once.
Fix this, by adding the function `ice_set_phy_type_from_speed()`
for 1000M speeds.
Fixes: 48cb27f2fd ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In icu_of_init(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put()
when it is not used anymore.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Adding two filters with same matching criteria ends up with
one rule in hardware with act = ICE_FWD_TO_VSI_LIST.
In order to remove them properly we have to keep the
information about vsi handle which is used in VSI bitmap
(ice_adv_fltr_mgmt_list_entry::vsi_list_info::vsi_map).
Fixes: 0d08a441fb ("ice: ndo_setup_tc implementation for PF")
Reported-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c
line: 1051
* have the the deepest nesting of page tables.
changed to
* have the deepest nesting of page tables.
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621133920.8112-1-jiangjian@cdjrlc.com
I'm leaving Intel. Update email address to korg and add .mailmap
entries. For now, I will be taking a reduced role in CXL development,
but I still plan to spend time working on it, and I can still serve as a
good substitute if needed for maintainer responsibilities (that may
change in the future).
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/20220520180059.632054-1-bwidawsk@kernel.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Drive-by cleanup, we don't need to validate the port references here as we
already previously went through the effort of refactoring things such that
we're guaranteed to be able to access ->mstb and ->port safely from
drm_dp_check_and_send_link_address(), since the only two places in the
codebase that drop an MST reference in such a way that it would remove it
from the topology are both protected under probe_lock.
Thanks for that, past Lyude!
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220602201757.30431-2-lyude@redhat.com
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/display/drm_dp_helper.c
line: 1600
* Doesn't account the the "MOT" bit, and instead assumes each
changed to
* Doesn't account the "MOT" bit, and instead assumes eac
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621190055.8323-1-jiangjian@cdjrlc.com
Use new kernel_can_power_off() API instead of legacy pm_power_off global
variable to fix regressed hibernation to disk where machine no longer
powers off when it should because ACPI power driver transitioned to the
new sys-off based API and it doesn't use pm_power_off anymore.
Fixes: 98f30d0ecf ("ACPI: power: Switch to sys-off handler API")
Tested-by: Ken Moffat <zarniwhoop@ntlworld.com>
Reported-by: Ken Moffat <zarniwhhop@ntlworld.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 34a897758e ("ice: Add support for inner etype in switchdev")
added the ability to match on inner ethertype. A side effect of that change
is that it is now impossible to add some filters for protocols which do not
contain inner ethtype field. tc requires the protocol field to be specified
when providing certain other options, e.g. src_ip. This is a problem in
case of GTP - when user wants to specify e.g. src_ip, they also need to
specify protocol in tc command (otherwise tc fails with: Illegal "src_ip").
Because GTP is a tunnel, the protocol field is treated as inner protocol.
GTP does not contain inner ethtype field and the filter cannot be added.
To fix this, ignore the ethertype field in case of GTP filters.
Fixes: 9a225f81f5 ("ice: Support GTP-U and GTP-C offload in switchdev")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We have seen multiple RC6 issues where it is useful to know
which global forcewake bits are set. Add this to the 'drpc'
debugfs output.
v2: Review comments (Ashutosh)
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617212032.34577-1-vinay.belgaumkar@intel.com
Commit 5291984004 ("dm: fix bio polling to handle possibile
BLK_STS_AGAIN") inadvertently introduced an early return from
dm_io_complete() without first queueing the bio to DM if BLK_STS_AGAIN
occurs and bio-polling is _not_ being used.
Fix this by only returning early from dm_io_complete() if the bio has
first been properly queued to DM. Otherwise, the bio will never finish
via bio_endio.
Fixes: 5291984004 ("dm: fix bio polling to handle possibile BLK_STS_AGAIN")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
- remove pointless include of asm/efi.h, which does not exist on ia64
- fix DXE service marshalling prototype for mixed mode
-----BEGIN PGP SIGNATURE-----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=4yyi
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- remove pointless include of asm/efi.h, which does not exist on ia64
- fix DXE service marshalling prototype for mixed mode
* tag 'efi-urgent-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/x86: libstub: Fix typo in __efi64_argmap* name
efi: sysfb_efi: remove unnecessary <asm/efi.h> include
-----BEGIN PGP SIGNATURE-----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=bAcJ
-----END PGP SIGNATURE-----
Merge tag 'certs-20220621' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull signature checking selftest from David Howells:
"The signature checking code, as used by module signing, kexec, etc.,
is non-FIPS compliant as there is no selftest.
For a kernel to be FIPS-compliant, signature checking would have to be
tested before being used, and the box would need to panic if it's not
available (probably reasonable as simply disabling signature checking
would prevent you from loading any driver modules).
Deal with this by adding a minimal test.
This is split into two patches: the first moves load_certificate_list()
to the same place as the X.509 code to make it more accessible
internally; the second adds a selftest"
* tag 'certs-20220621' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
certs: Add FIPS selftests
certs: Move load_certificate_list() to be with the asymmetric keys code
-----BEGIN PGP SIGNATURE-----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=eORM
-----END PGP SIGNATURE-----
Merge tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- print more error messages for invalid mount option values
- prevent remount with v1 space cache for subpage filesystem
- fix hang during unmount when block group reclaim task is running
* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add error messages to all unrecognized mount options
btrfs: prevent remounting to v1 space cache for subpage mount
btrfs: fix hang during unmount when block group reclaim task is running
If rq_qos_throttle() ends up blocking, then we will have invalidated and
flushed our current plug. Since blk_mq_get_cached_request() hasn't
popped the cached request off the plug list just yet, we end holding a
pointer to a request that is no longer valid. This insta-crashes with
rq->mq_hctx being NULL in the validity checks just after.
Pop the request off the cached list before doing rq_qos_throttle() to
avoid using a potentially stale request.
Fixes: 0a5aa8d161 ("block: fix blk_mq_attempt_bio_merge and rq_qos_throttle protection")
Reported-by: Dylan Yudaken <dylany@fb.com>
Tested-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The recent patch to make afs_getattr consult the server didn't account
for the pseudo-inodes employed by the dynamic root-type afs superblock
not having a volume or a server to access, and thus an oops occurs if
such a directory is stat'd.
Fix this by checking to see if the vnode->volume pointer actually points
anywhere before following it in afs_getattr().
This can be tested by stat'ing a directory in /afs. It may be
sufficient just to do "ls /afs" and the oops looks something like:
BUG: kernel NULL pointer dereference, address: 0000000000000020
...
RIP: 0010:afs_getattr+0x8b/0x14b
...
Call Trace:
<TASK>
vfs_statx+0x79/0xf5
vfs_fstatat+0x49/0x62
Fixes: 2aeb8c86d4 ("afs: Fix afs_getattr() to refetch file status if callback break occurred")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/165408450783.1031787.7941404776393751186.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The actual name of the DXE services function used
is set_memory_space_attributes(), not set_memory_space_descriptor().
Change EFI mixed mode helper macro name to match the function name.
Fixes: 31f1a0edff ("efi/x86: libstub: Make DXE calls mixed mode safe")
Signed-off-by: Evgeniy Baskov <baskov@ispras.ru>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Nothing defined in the header is used by drivers/firmware/efi/sysfb_efi.c
but also, including it can lead to build errors when built on arches that
don't have an asm/efi.h header file.
This can happen for example if a driver that is built when COMPILE_TEST is
enabled selects the SYSFB symbol, e.g. on powerpc with allyesconfig:
drivers/firmware/efi/sysfb_efi.c:29:10: fatal error: asm/efi.h: No such file or directory
29 | #include <asm/efi.h>
| ^~~~~~~~~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
George Shen
Wenjing Liu
JinZe.Xu
Qingqing Zhuo
Saaem Rizvi
Sung Joon Kim
hersen wu
Ian Chen
Wayne Lin
Mario Limonciello
Cruise Hung
Yifan Zhang
Aurabindo Pillai
Yang Wang
Jack Xiao
Stanley.Yang
Alex Deucher
Graham Sider
Ruijing Dong
Alison Schofield
Ben Widawsky
Jonathan Cameron
Anatolii Gerasymenko
Liang He
Wojciech Drewek
Jiang Jian
Lyude Paul
Dmitry Osipenko
Marcin Szycik
Vinay Belgaumkar
Mike Snitzer
Nikos Tsironis
Linus Torvalds
Jens Axboe
David Howells
Evgeniy Baskov
Javier Martinez Canillas