Currently the Conexant codec driver sets up the beep NID after calling
snd_hda_gen_parse_auto_config(). It turned out that this results in
the insufficient setup for the beep control, as the generic parser
handles the fake path in snd_hda_gen_parse_auto_config() only if the
beep_nid is set up beforehand.
For dealing with the beep widget properly, call cx_auto_parse_beep()
before snd_hda_gen_parse_auto_config() call.
Fixes: 51e19ca5f7 ("ALSA: hda/conexant - Clean up beep code")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152
Link: https://lore.kernel.org/r/20220620104008.1994-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Avoid pio_write process is preempted, resulting in abnormal state.
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Signed-off-by: Jon <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20220617124251.5051-1-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The user may use the fbcon=vc:<n1>-<n2> option to tell fbcon to take
over the given range (n1...n2) of consoles. The value for n1 and n2
needs to be a positive number and up to (MAX_NR_CONSOLES - 1).
The given values were not fully checked against those boundaries yet.
To fix the issue, convert first_fb_vc and last_fb_vc to unsigned
integers and check them against the upper boundary, and make sure that
first_fb_vc is smaller than last_fb_vc.
Cc: stable@vger.kernel.org # v4.19+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YpkYRMojilrtZIgM@p100
There is no need to directly skip over to the SCROLL_REDRAW case while
the logo is still shown.
When using DRM, this change has no effect because the code will reach
the SCROLL_REDRAW case immediately anyway.
But if you run an accelerated fbdev driver and have
FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION enabled, console scrolling is
slowed down by factors so that it feels as if you use a 9600 baud
terminal.
So, drop those unnecessary checks and speed up fbdev console
acceleration during bootup.
Cc: stable@vger.kernel.org # v5.10+
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YpkYxk7wsBPx3po+@p100
Stop displaying engine classes with no engines - it is not a huge problem
if they are shown, since the values will correctly be all zeroes, but it
does count as misleading.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 055634e4b6 ("drm/i915: Expose client engine utilisation via fdinfo")
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616140056.559074-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 9f1b1d0b22)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
For some reason (ancient assembler?) the following build error is
reported by the kisskb:
kisskb/src/arch/xtensa/kernel/entry.S: Error: unknown pseudo-op: `.bss':
=> 2176
Change abbreviated '.bss' to the full '.section .bss, "aw"' to fix this
error.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
A reply to CLOCK_DESCRIBE_RATES issued against a non rate-discrete clock
should be composed of a triplet of rates descriptors (min/max/step)
returned all in one reply message.
This is not always the case when dealing with some SCMI server deployed in
the wild: relax such constraint while maintaining memory safety by checking
carefully the returned payload size.
While at that cleanup a stale debug printout.
Link: https://lore.kernel.org/r/20220616170347.2800771-1-cristian.marussi@arm.com
Fixes: 7bc7caafe6 ("firmware: arm_scmi: Use common iterators in the clock protocol")
Tested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This comment wasn't updated when we moved from read() to read_iter(), so
this patch makes the trivial fix.
Fixes: 1b388e7765 ("random: convert to using fops->read_iter()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
After setting the sock ktls, update ctx->sk_proto to sock->sk_prot by
tls_update(), so now ctx->sk_proto->close is tls_sk_proto_close(). When
close the sock, tls_sk_proto_close() is called for sock->sk_prot->close
is tls_sk_proto_close(). But ctx->sk_proto->close() will be executed later
in tls_sk_proto_close(). Thus tls_sk_proto_close() executed repeatedly
occurred. That will trigger the following bug.
=================================================================
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:tls_sk_proto_close+0xd8/0xaf0 net/tls/tls_main.c:306
Call Trace:
<TASK>
tls_sk_proto_close+0x356/0xaf0 net/tls/tls_main.c:329
inet_release+0x12e/0x280 net/ipv4/af_inet.c:428
__sock_release+0xcd/0x280 net/socket.c:650
sock_close+0x18/0x20 net/socket.c:1365
Updating a proto which is same with sock->sk_prot is incorrect. Add proto
and sock->sk_prot equality check at the head of tls_update() to fix it.
Fixes: 95fa145479 ("bpf: sockmap/tls, close can race with map free")
Reported-by: syzbot+29c3c12f3214b85ad081@syzkaller.appspotmail.com
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8ff978b8b2 ("ipv4/raw: support binding to nonlocal addresses")
introduces support for binding to nonlocal addresses, as well as some
basic test coverage for some of the related cases.
Commit b4a028c4d0 ("ipv4: ping: fix bind address validity check")
fixes a regression which incorrectly removed some checks for bind
address validation. In addition, it introduces regression tests for
those specific checks. However, those regression tests are defective, in
that they perform the tests using an incorrect combination of bind
flags. As a result, those tests fail when they should succeed.
This commit introduces additional regression tests for nonlocal binding
and fixes the defective regression tests. It also introduces new
set_sysctl calls for the ipv4_bind test group, as to perform the ICMP
binding tests it is necessary to allow ICMP socket creation by setting
the net.ipv4.ping_group_range knob.
Fixes: b4a028c4d0 ("ipv4: ping: fix bind address validity check")
Reported-by: Riccardo Paolo Bestetti <pbl@bestov.io>
Signed-off-by: Riccardo Paolo Bestetti <pbl@bestov.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
When DMAR / VT-d is enabled, the display engine uses overfetching,
presumably to deal with the increased latency. To avoid display engine
errors and DMAR faults, as a workaround the GGTT is populated with scatch
PTEs when VT-d is enabled. However starting with gen10, Write-combined
writing of scratch PTES is no longer possible and as a result, populating
the full GGTT with scratch PTEs like on resume becomes very slow as
uncached access is needed.
Therefore, on integrated GPUs utilize the fact that the PTEs are stored in
stolen memory which retain content across S3 suspend. Don't clear the PTEs
on suspend and resume. This improves on resume time with around 100 ms.
While 100+ms might appear like a short time it's 10% to 20% of total resume
time and important in some applications.
One notable exception is Intel Rapid Start Technology which may cause
stolen memory to be lost across what the OS percieves as S3 suspend.
If IRST is enabled or if we can't detect whether IRST is enabled, retain
the old workaround, clearing and re-instating PTEs.
As an additional measure, if we detect that the last ggtt pte was lost
during suspend, print a warning and re-populate the GGTT ptes
On discrete GPUs, the display engine scans out from LMEM which isn't
subject to DMAR, and presumably the workaround is therefore not needed,
but that needs to be verified and disabling the workaround for dGPU,
if possible, will be deferred to a follow-up patch.
v2:
- Rely on retained ptes to also speed up suspend and resume re-binding.
- Re-build GGTT ptes if Intel rst is enabled.
v3:
- Re-build GGTT ptes also if we can't detect whether Intel rst is enabled,
and if the guard page PTE and end of GGTT was lost.
v4:
- Fix some kerneldoc issues (Matthew Auld), rebase.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617152856.249295-1-thomas.hellstrom@linux.intel.com
Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.
* testing
- Fix a missing MODULE_LICENSE() warning by restricting possible build
configs.
* Various drivers
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
* adi,admv1014
- Fix dubious x & !y warning.
* adi,axi-adc
- Fix missing of_node_put() in error and normal paths.
* aspeed,adc
- Add missing of_node_put()
* fsl,mma8452
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset as
ACK will be missing (device reset before sending it).
* fsl,vf610
- Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
- Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
- Disable regulators in error path.
* invensense,icm42600
- Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
- Add missing fwnode_handle_put() in error path.
* rescale
- Fix a boolean logic bug for detection of raw + scale affecting an
obscure corner case.
* semtech,sx9324
- Check return value of read of pin_defs
* st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't expose the
vref_int channel.
- Fix maximum clock rate for stm32pm15x
* ti,ads131e08
- Add missing fwnode_handle_put() in error paths.
* xilinx,ams
- Fix variable checked for error from platform_get_irq()
* x-powers,axp288
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
* yamaha,yas530
- Fix inverted check on calibration data being all zeros.
-----BEGIN PGP SIGNATURE-----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=AtPS
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO fixes for the 5.19 cycle.
Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.
* testing
- Fix a missing MODULE_LICENSE() warning by restricting possible build
configs.
* Various drivers
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
* adi,admv1014
- Fix dubious x & !y warning.
* adi,axi-adc
- Fix missing of_node_put() in error and normal paths.
* aspeed,adc
- Add missing of_node_put()
* fsl,mma8452
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset as
ACK will be missing (device reset before sending it).
* fsl,vf610
- Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
- Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
- Disable regulators in error path.
* invensense,icm42600
- Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
- Add missing fwnode_handle_put() in error path.
* rescale
- Fix a boolean logic bug for detection of raw + scale affecting an
obscure corner case.
* semtech,sx9324
- Check return value of read of pin_defs
* st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't expose the
vref_int channel.
- Fix maximum clock rate for stm32pm15x
* ti,ads131e08
- Add missing fwnode_handle_put() in error paths.
* xilinx,ams
- Fix variable checked for error from platform_get_irq()
* x-powers,axp288
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
* yamaha,yas530
- Fix inverted check on calibration data being all zeros.
* tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits)
iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
iio: accel: mma8452: ignore the return value of reset operation
iio: adc: stm32: fix maximum clock rate for stm32mp15x
iio: adc: stm32: fix vrefint wrong calibration value handling
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
iio: adc: vf610: fix conversion mode sysfs node name
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
iio:humidity:hts221: rearrange iio trigger get and register
iio:chemical:ccs811: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
iio:accel:kxcjk-1013: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio: afe: rescale: Fix boolean logic bug
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
iio: adc: stm32: Fix ADCs iteration in irq handler
iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
iio: trigger: sysfs: fix use-after-free on remove
...
The recent report for a crash on Haswell machines implied that the
x86-specific (rather hackish) implementation for write-cache memory
buffer allocation in ALSA core is buggy with the recent kernel in some
corner cases. This patch drops the x86-specific implementation and
uses the standard dma_alloc_wc() & co generically for avoiding the bug
and also for simplification.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216112
Cc: <stable@vger.kernel.org> # v5.18+
Link: https://lore.kernel.org/r/20220620073440.7514-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The request queue pointer in struct blk_independent_access_range is
unused. Remove it.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Fixes: 41e46b3c2a ("block: Fix potential deadlock in blk_ia_range_sysfs_show()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220603053529.76405-1-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While watching Michael's new talk on Clang-built-Linux, I noticed the
arch table in our docs that he refers to is outdated.
Add hexagon and User Mode. Bump MIPS and RISCV to LLVM=1. PowerPC is
almost LLVM=1 capable; ppc64le works, but ppc64 (big endian) and ppc32
still need more work.
Link: https://youtu.be/W4zdEDpvR5c?t=399
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit f02e8a6596 ("module: Sort exported symbols"),
EXPORT_SYMBOL* is placed in the individual section ___ksymtab(_gpl)+<sym>
(3 leading underscores instead of 2).
Since then, modpost cannot detect the bad combination of EXPORT_SYMBOL
and __init/__exit.
Fix the .fromsec field.
Fixes: f02e8a6596 ("module: Sort exported symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Made iostat related locks safe to be called from irq context again.
Cc: <stable@vger.kernel.org>
Fixes: a1e09b03e6 ("f2fs: use iomap for direct I/O")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Eddie Huang <eddie.huang@mediatek.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This fixes the below corruption.
[345393.335389] F2FS-fs (vdb): sanity_check_inode: inode (ino=6d0, mode=33206) should not have inline_data, run fsck to fix
Cc: <stable@vger.kernel.org>
Fixes: 677a82b44e ("f2fs: fix to do sanity check for inline inode")
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
random.c ratelimits how much it warns about uninitialized urandom reads
using __ratelimit(). When the RNG is finally initialized, it prints the
number of missed messages due to ratelimiting.
It has been this way since that functionality was introduced back in
2018. Recently, cc1e127bfa ("random: remove ratelimiting for in-kernel
unseeded randomness") put a bit more stress on the urandom ratelimiting,
which teased out a bug in the implementation.
Specifically, when under pressure, __ratelimit() will print its own
message and reset the count back to 0, making the final message at the
end less useful. Secondly, it does so as a pr_warn(), which apparently
is undesirable for people's CI.
Fortunately, __ratelimit() has the RATELIMIT_MSG_ON_RELEASE flag exactly
for this purpose, so we set the flag.
Fixes: 4e00b339e2 ("random: rate limit unseeded randomness warnings")
Cc: stable@vger.kernel.org
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Ron Economos <re@w6rz.net>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
It used to be that mix_interrupt_randomness() would credit 1 bit each
time it ran, and so add_interrupt_randomness() would schedule mix() to
run every 64 interrupts, a fairly arbitrary number, but nonetheless
considered to be a decent enough conservative estimate.
Since e3e33fc2ea ("random: do not use input pool from hard IRQs"),
mix() is now able to credit multiple bits, depending on the number of
calls to add(). This was done for reasons separate from this commit, but
it has the nice side effect of enabling this patch to schedule mix()
less often.
Currently the rules are:
a) Credit 1 bit for every 64 calls to add().
b) Schedule mix() once a second that add() is called.
c) Schedule mix() once every 64 calls to add().
Rules (a) and (c) no longer need to be coupled. It's still important to
have _some_ value in (c), so that we don't "over-saturate" the fast
pool, but the once per second we get from rule (b) is a plenty enough
baseline. So, by increasing the 64 in rule (c) to something larger, we
avoid calling queue_work_on() as frequently during irq storms.
This commit changes that 64 in rule (c) to be 1024, which means we
schedule mix() 16 times less often. And it does *not* need to change the
64 in rule (a).
Fixes: 58340f8e95 ("random: defer fast pool mixing to worker")
Cc: stable@vger.kernel.org
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
0-day reports:
drivers/iio/proximity/sx9324.c:868:3: warning: Value stored
to 'ret' is never read [clang-analyzer-deadcode.DeadStores]
Put an if condition to break out of switch if ret is non-zero.
Signed-off-by: Aashish Sharma <shraash@google.com>
Fixes: a8ee3b32f5 ("iio:proximity:sx9324: Add dt_binding support")
Reported-by: kernel test robot <lkp@intel.com>
[swboyd@chromium.org: Reword commit subject, add fixes tag]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220613232224.2466278-1-swboyd@chromium.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On fxls8471, after set the reset bit, the device will reset immediately,
will not give ACK. So ignore the return value of this reset operation,
let the following code logic to check whether the reset operation works.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Fixes: ecabae7131 ("iio: mma8452: Initialise before activating")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/1655292718-14287-1-git-send-email-haibo.chen@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If the vrefint calibration is zero, the vrefint channel output value
cannot be computed. Currently, in such case, the raw conversion value
is returned, which is not relevant.
Do not expose the vrefint channel when the output value cannot be
computed, instead.
Fixes: 0e346b2cfa ("iio: adc: stm32-adc: add vrefint calibration support")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20220609095856.376961-1-olivier.moysan@foss.st.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The 0 value used for INV_CHIP_ICM42600 was not working since the
match in i2c/spi was checking against NULL value.
To keep this check, add a first INV_CHIP_INVALID 0 value as safe
guard.
Fixes: 31c24c1e93 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20220609102301.4794-1-jmaneyrol@invensense.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: ef04070692 ("iio: adc: adi-axi-adc: add support for AXI ADC IP core")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220524074517.45268-1-linmq006@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When IIO_RESCALE_KUNIT_TEST=y and IIO_RESCALE=m,
drivers/iio/afe/iio-rescale.o is built twice causing the
MODULE_LICENSE() to be lost, as shown by:
ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
Rework the build configuration to have the dependency specified in the
Kconfig.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 8e74a48d17 ("iio: test: add basic tests for the iio-rescale driver")
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220601142138.3331278-1-liambeguin@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IIO trigger interface function iio_trigger_get() should be called after
iio_trigger_register() (or its devm analogue) strictly, because of
iio_trigger_get() acquires module refcnt based on the trigger->owner
pointer, which is initialized inside iio_trigger_register() to
THIS_MODULE.
If this call order is wrong, the next iio_trigger_put() (from sysfs
callback or "delete module" path) will dereference "default" module
refcnt, which is incorrect behaviour.
Fixes: e4a70e3e7d ("iio: humidity: add support to hts221 rh/temp combo device")
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220524181150.9240-6-ddrokosov@sberdevices.ru
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IIO trigger interface function iio_trigger_get() should be called after
iio_trigger_register() (or its devm analogue) strictly, because of
iio_trigger_get() acquires module refcnt based on the trigger->owner
pointer, which is initialized inside iio_trigger_register() to
THIS_MODULE.
If this call order is wrong, the next iio_trigger_put() (from sysfs
callback or "delete module" path) will dereference "default" module
refcnt, which is incorrect behaviour.
Fixes: f1f065d7ac ("iio: chemical: ccs811: Add support for data ready trigger")
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220524181150.9240-5-ddrokosov@sberdevices.ru
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IIO trigger interface function iio_trigger_get() should be called after
iio_trigger_register() (or its devm analogue) strictly, because of
iio_trigger_get() acquires module refcnt based on the trigger->owner
pointer, which is initialized inside iio_trigger_register() to
THIS_MODULE.
If this call order is wrong, the next iio_trigger_put() (from sysfs
callback or "delete module" path) will dereference "default" module
refcnt, which is incorrect behaviour.
Fixes: 47196620c8 ("iio: mxc4005: add data ready trigger for mxc4005")
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220524181150.9240-4-ddrokosov@sberdevices.ru
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IIO trigger interface function iio_trigger_get() should be called after
iio_trigger_register() (or its devm analogue) strictly, because of
iio_trigger_get() acquires module refcnt based on the trigger->owner
pointer, which is initialized inside iio_trigger_register() to
THIS_MODULE.
If this call order is wrong, the next iio_trigger_put() (from sysfs
callback or "delete module" path) will dereference "default" module
refcnt, which is incorrect behaviour.
Fixes: c1288b8338 ("iio: accel: kxcjk-1013: Increment ref counter for indio_dev->trig")
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220524181150.9240-3-ddrokosov@sberdevices.ru
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IIO trigger interface function iio_trigger_get() should be called after
iio_trigger_register() (or its devm analogue) strictly, because of
iio_trigger_get() acquires module refcnt based on the trigger->owner
pointer, which is initialized inside iio_trigger_register() to
THIS_MODULE.
If this call order is wrong, the next iio_trigger_put() (from sysfs
callback or "delete module" path) will dereference "default" module
refcnt, which is incorrect behaviour.
Fixes: 0668a4e4d2 ("iio: accel: bma180: Fix indio_dev->trig assignment")
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220524181150.9240-2-ddrokosov@sberdevices.ru
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When introducing support for processed channels I needed
to invert the expression:
if (!iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) ||
!iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE))
dev_err(dev, "source channel does not support raw/scale\n");
To the inverse, meaning detect when we can usse raw+scale
rather than when we can not. This was the result:
if (iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) ||
iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE))
dev_info(dev, "using raw+scale source channel\n");
Ooops. Spot the error. Yep old George Boole came up and bit me.
That should be an &&.
The current code "mostly works" because we have not run into
systems supporting only raw but not scale or only scale but not
raw, and I doubt there are few using the rescaler on anything
such, but let's fix the logic.
Cc: Liam Beguin <liambeguin@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 53ebee9499 ("iio: afe: iio-rescale: Support processed channels")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Liam Beguin <liambeguin@gmail.com>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20220524075448.140238-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
of_find_node_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: d0a4c17b40 ("iio: adc: aspeed: Get and set trimming data.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220516075206.34580-1-linmq006@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The check for spurious IRQs introduced in 695e2f5c28 assumed that the bits
in the control and status registers are aligned. This is true for the H7 and MP1
version, but not the F4. The interrupt was then never handled on the F4.
Instead of increasing the complexity of the comparison and check each bit specifically,
we remove this check completely and rely on the generic handler for spurious IRQs.
Fixes: 695e2f5c28 ("iio: adc: stm32-adc: fix a regression when using dma and irq")
Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20220516203939.3498673-3-yannick.brosseau@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The irq handler was only checking the mask for the first ADCs in the case of the
F4 and H7 generation, since it was iterating up to the num_irq value. This patch add
the maximum number of ADC in the common register, which map to the number of entries of
eoc_msk and ovr_msk in stm32_adc_common_regs. This allow the handler to check all ADCs in
that module.
Tested on a STM32F429NIH6.
Fixes: 695e2f5c28 ("iio: adc: stm32-adc: fix a regression when using dma and irq")
Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20220516203939.3498673-2-yannick.brosseau@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
fwnode_handle_put() should be used when terminating
device_for_each_child_node() iteration with break or return to prevent
stale device node references from being left behind.
Fixes: d935eddd27 ("iio: adc: Add driver for Texas Instruments ADS131E0x ADC family")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com>
Link: https://lore.kernel.org/r/20220517033020.2033324-1-zhangjialin11@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
fwnode_handle_put() should be used when terminating
device_for_each_child_node() iteration with break or return to prevent
stale device node references from being left behind.
Fixes: d484c21bac ("iio: adc: Add driver for Renesas RZ/G2L A/D converter")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220517033526.2035735-1-zhangjialin11@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver should disable regulators when fails at regmap_update_bits().
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220510092431.1711284-1-zheyuma97@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The warning comes from __BF_FIELD_CHECK()
specifically
BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ? \
~((_mask) >> __bf_shf(_mask)) & (_val) : 0, \
_pfx "value too large for the field"); \
The code was using !(enum value) which is not particularly easy to follow
so replace that with explicit matching and use of ? 0 : 1; or ? 1 : 0;
to improve readability.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20220511090006.90502-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The device is identified by "NEXT" in board name, however there are
different versions of it, "Next Advance" and "Next Pro", that have
different DMI board names.
Due to a production error a batch or two have their board names prefixed
by "AYANEO", this makes it 6 different DMI board names. To save some
space in final kernel image DMI_MATCH is used instead of
DMI_EXACT_MATCH.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220619111952.8487-1-maccraft123mc@gmail.com
- Make RESERVE_BRK() work again with older binutils. The recent
'simplification' broke that.
- Make early #VE handling increment RIP when successful.
- Make the #VE code consistent vs. the RIP adjustments and add comments.
- Handle load_unaligned_zeropad() across page boundaries correctly in #VE
when the second page is shared.
-----BEGIN PGP SIGNATURE-----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=sRtG
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Make RESERVE_BRK() work again with older binutils. The recent
'simplification' broke that.
- Make early #VE handling increment RIP when successful.
- Make the #VE code consistent vs. the RIP adjustments and add
comments.
- Handle load_unaligned_zeropad() across page boundaries correctly in
#VE when the second page is shared.
* tag 'x86-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page
x86/tdx: Clarify RIP adjustments in #VE handler
x86/tdx: Fix early #VE handling
x86/mm: Fix RESERVE_BRK() for older binutils
- Remove obsolete CONFIG_X86_SMAP reference from objtool
- Fix overlapping text section failures in faddr2line for real
- Remove OBJECT_FILES_NON_STANDARD usage from x86 ftrace and replace it
with finegrained annotations so objtool can validate that code
correctly.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmKvHbwTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoQlsEADC7BotE1Mi8HITScIlHT19bkZ7Bm6M
g46RCtUw0u+lo7BclIetNYGWQ0z+D+1DbmZTBv5D22N/Wd6MrwOuuwRVtJ2dEosF
l/EK1qKLxCGMdQ1x0KOmrjzHB4WmcUH0pQwDHa5N5s5IyrJRRFHtoLk3EYp6QIhi
mIZTJgGUEe/aS7BtFM5xARprm7JxdbhXgXVbnC1ctzpOi2y6O7F4Ek3x4j5zTGV/
49iuO2ljqmKdoFlPa1fhuw+O9sTUf+RmKLPEU+2nm7Wg+wlIwKIB3yDDBoZ9Q7lm
YdorW0/506x4qOwa8KAjxXEb2qgZkL/fQcMS0jQQKNNDD8GHU+3YdjCNbrmZjA+T
Ib0rs9YsxgLstnmqzU3QfarhgtdzIMhzF0cofoFDK0a8tHLqOhZF4j7wLmYo52ec
6Hrt8IvJPW2b3TC6KfRAF+uWsDDoaum0OOFVjVu1b9G6fFf0i8h5JGWdkJh8cau9
0qvAYg0sDjRf7zAZ6kbbGDVCljECyypIdCBF3ihA6yMhJX16VihEWTJyqIaoO+a0
0XzPvkhX+6mY0kqn+5HvvhLEY4POA8pFKeTPx4eABvKnw7m01I9cJfHa7HEBQHe6
ZJA7qWMBRrPfK2Ogrx8zohj2sOdHMHlIQU+6Ai+7+BHs13Nje4umGMu2YuZrnfIF
gQ1ayCN8OsUwVA==
=12KJ
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull build tooling updates from Thomas Gleixner:
- Remove obsolete CONFIG_X86_SMAP reference from objtool
- Fix overlapping text section failures in faddr2line for real
- Remove OBJECT_FILES_NON_STANDARD usage from x86 ftrace and replace it
with finegrained annotations so objtool can validate that code
correctly.
* tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ftrace: Remove OBJECT_FILES_NON_STANDARD usage
faddr2line: Fix overlapping text section failures, the sequel
objtool: Fix obsolete reference to CONFIG_X86_SMAP
balance_push(). sched_setscheduler() spliced the balance callbacks accross
a lock break which makes an interleaving schedule() observe an empty list.
-----BEGIN PGP SIGNATURE-----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=k54w
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix plugging a race between sched_setscheduler()
and balance_push().
sched_setscheduler() spliced the balance callbacks accross a lock
break which makes it possible for an interleaving schedule() to
observe an empty list"
* tag 'sched-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix balance_push() vs __sched_setscheduler()
Takashi Iwai
Jon Lin
Carlo Lobrano
Helge Deller
Tvrtko Ursulin
Ville Syrjälä
Max Filippov
Cristian Marussi
Jason A. Donenfeld
Ziyang Xuan
Eric Dumazet
Riccardo Paolo Bestetti
Thomas Hellström
Greg Kroah-Hartman
Damien Le Moal
Nick Desaulniers
Masahiro Yamada
Daeho Jeong
Jaegeuk Kim
Linus Torvalds
Aashish Sharma
Haibo Chen
Olivier Moysan
Jean-Baptiste Maneyrol
Baruch Siach
Miaoqian Lin
Liam Beguin
Dmitry Rokosov
Linus Walleij
Yannick Brosseau
Jialin Zhang
Vincent Whitchurch
Zheyu Ma
Antoniu Miclaus
Maya Matuszczyk