Pull devicetree fixes from Rob Herring:
- Add Conor Dooley as a DT binding maintainer
- Swap the order of parsing /memreserve/ and /reserved-memory nodes so
that the /reserved-memory nodes which have more information are
handled first
- Fix some property dependencies in riscv,pmu binding
- Update maintainers entries on a couple of bindings
* tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
MAINTAINERS: add Conor as a dt-bindings maintainer
dt-bindings: perf: riscv,pmu: fix property dependencies
dt-bindings: xilinx: Remove Naga from memory and mtd bindings
of: fdt: Scan /memreserve/ last
dt-bindings: clock: r9a06g032-sysctrl: Change maintainer to Fabrizio Castro
dt-bindings: pinctrl: renesas,rzv2m: Change maintainer to Fabrizio Castro
dt-bindings: pinctrl: renesas,rzn1: Change maintainer to Fabrizio Castro
dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro
Pull clk updates from Stephen Boyd:
"Nothing looks out of the ordinary in this batch of clk driver updates.
There are a couple patches to the core clk framework, but they're all
basically cleanups or debugging aids. The driver updates and new
additions are dominated in the diffstat by Qualcomm and MediaTek
drivers. Qualcomm gained a handful of new drivers for various SoCs,
and MediaTek gained a bunch of drivers for MT8188. The MediaTek
drivers are being modernized as well, so there are updates all over
that vendor's clk drivers. There's also a couple other new clk drivers
in here, for example the Starfive JH7110 SoC support is added.
Outside of the two major SoC vendors though, we have the usual
collection of non-critical fixes and cleanups to various clk drivers.
It's good to see that we're getting more cleanups and modernization
patches. Maybe one day we'll be able to properly split clk providers
from clk consumers.
Core:
- Print an informational message before disabling unused clks
New Drivers:
- BCM63268 timer clock and reset controller
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Clk driver support for Loongson-2 SoCs
- Clock driver for Skyworks Si521xx I2C PCIe clock generators
- Initial Starfive JH7110 clk/reset support
- Global clock controller drivers for Qualcomm SM7150, IPQ9574,
MSM8917 and IPQ5332 SoCs
- GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
SoCs
Updates:
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
- Convert platform clk drivers to remove_new()
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Reimplement Loongson-1 clk driver with DT support
- Migrate socfpga clk driver to of_clk_add_hw_provider()
- Support for i3c clks on Aspeed ast2600 SoCs
- Add clock generic devm_clk_hw_register_gate_parent_data
- Add audiomix block control for i.MX8MP
- Add support for determine_rate to i.MX composite-8m
- Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
- Provide clock name in error message for clk-gpr-mux on get parent
failure
- Drop duplicate imx_clk_mux_flags macro
- Register the i.MX8MP Media Disp2 Pix clock as bus clock
- Add Media LDB root clock to i.MX8MP
- Make i.MX8MP nand_usdhc_bus clock as non-critical
- Fix the rate table for i.MX fracn-gppll
- Disable HW control for the fracn-gppll in order to be controlled by
register write
- Add support for interger PLL in fracn-gppll
- Add mcore_booted module parameter to i.MX93 provider
- Add NIC, A55 and ARM PLL clocks to i.MX93
- Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
- Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
to get more accurate clock rates
- Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
- Update some of the i.MX critical clocks flags to allow glitchless
on-the-fly rate change.
- Add I2C5 clock on Renesas R-Car V3H
- Exynos850: Add CMU_G3D clock controller for the Mali GPU
- Extract Exynos5433 (ARM64) clock controller power management code
to common driver parts
- Exynos850: make PMU_ALIVE_PCLK clock critical
- Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
V4H
- Add video capture (VIN) clocks on Renesas R-Car V3H
- Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
- Support for Stromer Plus PLL on Qualcomm IPQ5332
- Add a missing reset to Qualcomm QCM2290
- Migrate Qualcomm IPQ4019 to clk_parent_data
- Make USB GDSCs enter retention state when disabled on Qualcomm
SM6375, MSM8996 and MSM8998 SoCs
- Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
- Add two EMAC GDSCs on Qualcomm SC8280XP
- Use shared rcg clk ops in Qualcomm SM6115 GCC
- Park Qualcomm SM8350 PCIe PIPE clks when disabled
- Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
- Add missing XO clocks to Qualcomm MSM8226 and MSM8974
- Convert some Qualcomm clk DT bindings to YAML
- Reparenting fix for the clock supplying camera modules on Rockchip
rk3399
- Mark more critical (bus-)clocks on Rockchip rk3588"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
clk: rockchip: rk3588: make gate linked clocks critical
clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
clk: qcom: add the GPUCC driver for sa8775p
dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
clk: starfive: Avoid casting iomem pointers
clk: microchip: fix potential UAF in auxdev release callback
clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
clk: mediatek: fhctl: Mark local variables static
clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
clk: uniphier: Use managed `of_clk_add_hw_provider()`
clk: si5351: Use managed `of_clk_add_hw_provider()`
clk: si570: Use managed `of_clk_add_hw_provider()`
clk: si514: Use managed `of_clk_add_hw_provider()`
clk: lmk04832: Use managed `of_clk_add_hw_provider()`
...
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
* clk-starfive:
clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
clk: starfive: Avoid casting iomem pointers
MAINTAINERS: generalise StarFive clk/reset entries
reset: starfive: Add StarFive JH7110 reset driver
clk: starfive: Add StarFive JH7110 always-on clock driver
clk: starfive: Add StarFive JH7110 system clock driver
reset: starfive: jh71x0: Use 32bit I/O on 32bit registers
reset: starfive: Rename "jh7100" to "jh71x0" for the common code
reset: starfive: Extract the common JH71X0 reset code
reset: starfive: Factor out common JH71X0 reset code
reset: Create subdirectory for StarFive drivers
reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
clk: starfive: Rename "jh7100" to "jh71x0" for the common code
clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h
clk: starfive: Factor out common JH7100 and JH7110 code
clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
* clk-fractional:
clk: Remove mmask and nmask fields in struct clk_fractional_divider
clk: rockchip: Remove values for mmask and nmask in struct clk_fractional_divider
clk: imx: Remove values for mmask and nmask in struct clk_fractional_divider
clk: Compute masks for fractional_divider clk when needed.
* clk-devmof:
clk: uniphier: Use managed `of_clk_add_hw_provider()`
clk: si5351: Use managed `of_clk_add_hw_provider()`
clk: si570: Use managed `of_clk_add_hw_provider()`
clk: si514: Use managed `of_clk_add_hw_provider()`
clk: lmk04832: Use managed `of_clk_add_hw_provider()`
clk: hsdk-pll: Use managed `of_clk_add_hw_provider()`
clk: cdce706: Use managed `of_clk_add_hw_provider()`
clk: axs10x: Use managed `of_clk_add_hw_provider()`
clk: axm5516: Use managed `of_clk_add_hw_provider()`
clk: axi-clkgen: Use managed `of_clk_add_hw_provider()`
More Qualcomm ARM64 Devicetree updated for v6.4
Devicetree for the QCM2210/QCM2290 is introduced. Support for the RB1
board is introduced on QRB2210, RB2 on QRB4210, the AL02 board on
IPQ9574, the MI01.6 board is introduced on IPQ5332 and initial support
for Xiaomi Mi A3 is introduced on SM6125.
Support for the output-enable/disable flag is introduced in the
pinctrl-msm driver, and the non-standard "input-enable" is dropped from
a range of platforms.
A wide range of smaller fixes are introduced, based on Devicetree
validation.
MSM8953 gains LPASS, MPSS and Wireless subsystem support.
The iommus property is removed from PCIe nodes in all platforms, as the
only the child devices should be associated with iommu groups, through
the existing iommu-map property.
A few QUP instances are introduced on the IPQ5332 platform, and support
for the MI01.6 board is introduced.
The reserved-memory map on Huawei Nexus 6P is updated with the addition
of splash screen framebuffer memory and adjustment to the reserved
memory region overlapping the smem region.
Regulators are introduces for the SA8775P Ride platform.
A regulator is marked always-on, for correctness, on Trogdor. Pinconf
fixes are introduced to both sc7180 and sc7280 devices. A dedicated
reviewers list is added for boards relevant to the Chromebook engineers.
A set of pinconf fixes are introduced for sc8280xp, labels are
introduced for Soundwire nodes.
The sensor core remoteproc and FastRPC thereon, is introduce in SDM845
and enabled for OnePlus 6/6T and Shift Shift6mq.
RMTFS, remoteprocs, ath10k and ramoops is introduced for the Lenovo Tab
P11.
UFS support is introduced on SM6125.
SM8150 no longer defines the GPU to be in headless mode by default, GPU
speedbins are introduced.
GPU speedbins are introduced for SM8250 as well, as is support for
display on Xiaomi Mi Pad 5 Pro, with two different panels supported.
Soundwire controllers, ADSP audio codec macros and the Inline Crypto
Engine support is added to the SM8550 platform.
* tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (85 commits)
arm64: dts: qcom: Add base qrb4210-rb2 board dts
arm64: dts: qcom: sm8550: add Soundwire controllers
arm64: dts: qcom: sm8250: Add GPU speedbin support
arm64: dts: qcom: sm8150: Add GPU speedbin support
arm64: dts: qcom: sm8150: Don't start Adreno in headless mode
arm64: dts: qcom: ipq5332: add support for the RDP468 variant
arm64: dts: qcom: sdm630: move DSI opp-table out of DSI node
arm64: dts: qcom: sm6115p-j606f: Enable ATH10K WiFi
arm64: dts: qcom: sm6115p-j606f: Enable remoteprocs
arm64: dts: qcom: sm6115: Add RMTFS
arm64: dts: qcom: sm6115-j606f: Add ramoops node
arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin config
arm64: dts: qcom: sm8550: Add the Inline Crypto Engine node
arm64: dts: MSM8953: Add lpass nodes
arm64: dts: MSM8953: Add mpss nodes
arm64: dts: MSM8953: Add wcnss nodes
arm64: dts: qcom: sm8350: remove superfluous "input-enable"
arm64: dts: qcom: sm8150: remove superfluous "input-enable"
arm64: dts: qcom: apq8016: remove superfluous "input-enable"
arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
...
Link: https://lore.kernel.org/r/20230414031550.2412379-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM64 updates for v6.4
PCI I/O and MEM ranges are corrected across all targets with PCIe
enabled. Likewise is CPU clocks defined to be provided from CPUfreq for
a wide range of platforms, to satisfy the OPP definitions, and LLCC bank
information is corrected for all relevant platforms.
IPQ5332 gains SMEM, CPUfreq and support for triggering download mode.
The MI01.2 board is introduced.
On MSM8916 WCN compatibles are moved to be defined per board, to avoid
issues when boards rely on the incorrect defaults. Support for Yiming
UZ801 4G modem stick is introduced.
XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure
clock trees are properly rooted. DSI clocks feeding into gcc are
described on MSM8953.
On MSM8996 the external audio components are moved from the SoC dtsi. A
few DWC3 quirks are added.
On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and
XZ1 Compact. A numbe of boards have GPIO keys properly marked as
wakeup-source.
The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers,
SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains
reset and power key support, as well as thermal zones defined. Nodes are
sorted. On top of this the SA8775P Ride board/platform is introduced.
On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are
introduced, some clearing up unused properties, others correcting
errors. A number of Google rev0 boards on SC7180 are dropped, as these
are not considered to be in use by anyone anymore.
On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo
Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on
the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt
to probe both devices seen in the wild. A number of bug fixes are also
introduced, and the regulator definitions on X13s are corrected.
On SDM845 dynamic power coefficients are improved. BWMON compatible is
corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2,
XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc
support. OnePlus 6 and 6T gains hall sensor.
GPU clock controller and remoteproc nodes are added for SM6115. CPU
clock are defined to come from CPUfreq. Board-specific USB-properties
are moved out of the SoC dtsi.
On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem
remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states
are defined. Sony Xperia 10 IV gains volume down key support.
On SM8150 another UART is introduced, to be used by GNSS on the SA8155
ADP. Support for the Flash LED block in PM8150L is added.
On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node.
A few bug fixes are introduced after Devicetree validation.
The DisplayPort controller on both SM8350 and SM8450 is defined and the
related QMP instance is transitioned to the USB3/DP combo variant. IMEM
and PIL info is introduced, for post mortem debugging of remoteprocs. On
the HDK PMIC GLINK is enabled and role switch is enabled. Some audio
resources are corrected.
A typo in the USB role property of the Microsoft Surface is corrected,
thanks to DeviceTree validation.
PCIe controllers and PHYs descriptions are corrected, and pinctrl state
definitions are moved from the soc to the board definition. BWMON
compatibles are corrected. PM8550B gains the definition of the eUSB2
repeater and this is enabled on the MTP. PMIC GLINK is also defined for
the MTP and connected to DWC3, for role switching support.
In addition to this, a range of cleanups based on Devicetree validation
is introduced.
A few clock bindings are introduced, from topic-branches shared with the
clock tree, to aid introduction of references to these.
* tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (256 commits)
arm64: dts: qcom: sc8280xp-x13s: Add bluetooth
arm64: dts: qcom: sc8280xp: Define uart2
arm64: dts: qcom: sc8280xp: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sm8250: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs
arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes
arm64: dts: qcom: sa8775p: pmic: add thermal zones
arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input
arm64: dts: qcom: sa8775p: pmic: add the power key
arm64: dts: qcom: sa8775p: add the Power On device node
arm64: dts: qcom: sa8775p: add support for the on-board PMICs
arm64: dts: qcom: sa8775p: add the spmi node
arm64: dts: qcom: sa8775p: add the pdc node
arm64: dts: qcom: sa8775p: sort soc nodes by reg property
arm64: dts: qcom: sa8775p: pad reg properties to 8 digits
arm64: dts: qcom: sc8280xp: correct Soundwire wakeup interrupt name
arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1
arm64: dts: qcom: sdm845-tama: Enable GPU
arm64: dts: qcom: sdm845-tama: Enable remoteprocs
...
Link: https://lore.kernel.org/r/20230410170233.5931-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
RISC-V Devicetrees for v6.4
Microchip:
A "fix" for the system controller's regs on PolarFire SoC, adding a
missing reg property.
The patch had been sitting there for months and I only re-found it
recently, so you can guess how much of a "fix" it actually is. It'll
become needed when the system controller's QSPI gets added in the future,
but at present there's no urgency as the driver can handle both the
current and "fixed" versions.
StarFive:
Basic support for the JH7110 & the associated first-party dev board, the
VisionFive v2 (in two forms). There's a bunch of dt-bindings required
for this too, all of which have had input from the DT folk. There's
enough in this tag to boot to a console w/ an initramfs but little more.
The SoC supports some of the "new" bit manipulation instructions, which
is a good test for the recently added Zbb support in the kernel.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree
riscv: dts: starfive: Add StarFive JH7110 pin function definitions
riscv: dts: starfive: Add initial StarFive JH7110 device tree
dt-bindings: riscv: Add SiFive S7 compatible
dt-bindings: interrupt-controller: Add StarFive JH7110 plic
dt-bindings: timer: Add StarFive JH7110 clint
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
riscv: dts: microchip: fix the mpfs' mailbox regs
riscv: dts: microchip: add mpfs specific macb reset support
Link: https://lore.kernel.org/r/20230406-shank-impromptu-3d483bbc249f@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge MSM8917 Global Clock Controller and RPM clock controller bindings
through topic branch, to make it possible to introduce in Devicetree
source depending on these.
Add a device tree binding to describe clocks, resets and power domains
provided by the global clock controller on MSM8917 SoCs and the very
similar QM215 SoCs.
Add the new compatibles to qcom,gcc-msm8909.yaml. There is
no need to create another YAML file because the bindings are identical
(MSM8917 GCC requires the same parent clocks as the MSM8909 GCC).
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230223180935.60546-2-otto.pflueger@abscue.de
Rework kpss-gcc driver Documentation to yaml Documentation and move it
to clock as it's a clock-controller.
The current kpss-gcc Documentation have major problems and can't be
converted directly. Introduce various changes to the original
Documentation.
Add #clock-cells additional binding as this clock outputs a static clk
named acpu_l2_aux with supported compatible.
Only some compatible require and outputs a clock, for the others, set
only the reg as a required binding to correctly export the kpss-gcc
registers. As the reg is shared also add the required syscon compatible.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230116204751.23045-4-ansuelsmth@gmail.com
Convert kpss-acc driver Documentation to yaml.
The original Documentation was wrong all along. Fix it while we are
converting it.
The example was wrong as kpss-acc-v2 should only expose the regs but we
don't have any driver that expose additional clocks. The kpss-acc driver
is only specific to v1. For this exact reason, split the Documentation
to 2 different schema, v1 as clock-controller and v2 for
power-manager as per msm-3.10 specification, the exposed regs handle
power manager.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230116204751.23045-3-ansuelsmth@gmail.com
Merge SM7180 Global Clock Controller binding through a dedicated topic
branch, so that it can be introduced into the Devicetree source tree as
well in the same kernel release.
Enable yamllint to check the preferred commenting style of requiring a
space after a comment character '#'. Fix the cases in the tree which
have a warning with this enabled. Most cases just need a space after the
'#'. A couple of cases with comments which were not intended to be
comments are revealed. Those were in ti,sa2ul.yaml, ti,cal.yaml, and
brcm,bcmgenet.yaml.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230303214223.49451-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Pull clk updates from Stephen Boyd:
"We have one small patch to the clk core this time around. It fixes a
corner case with the CLK_OPS_PARENT_ENABLE flag combined with
clk_core_is_enabled() where it hangs the system. We'll simply assume
the clk is disabled if the parent is disabled and the flag is set.
Trying to turn on the parent to check the enable state of the clk runs
into system hangs at boot. We let this bake in -next for a couple
weeks to make sure there aren't any more issues because the last
attempt to fix this ran into hangs and had to be reverted.
Note: There were some more patches to the core framework around
sync_state and disabling unused clks, but I asked for that to be
reverted from the qcom PR because it isn't ready and we're still
discussing the best solution on the list.
Outside of the core clk framework, we have the usual collection of clk
driver updates and support for new SoCs (which seems to never stop).
The dirstat is dominated by Qualcomm because they added support for
quite a few SoCs this time around and also migrated quite a few of
their drivers to clk_parent_data. The other big diff is in the
Mediatek clk drivers that saw a significant rework this cycle to
similarly modernize the code, and we'll see that work continue in the
next cycle as well. Nothing really jumps out as scary here, except
that the significant churn in parent data descriptions can have typos
that go unnoticed. More details below.
Core:
- Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
New Drivers:
- Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET
ref clocks
- Support for Mediatek MT7891 SoC clks
- Support for many Qualcomm clk controllers:
- QDU1000/QRU1000 global clock controller
- SA8775P global clock controller
- SM8550 TCSR and display clock controller
- SM6350 clock controller
- MSM8996 CBF and APCS clock controllers
Updates:
- Various cleanups and improvements to Mediatek clk drivers to reduce
code size and modernize the drivers
- Support for Versa 5P49V60 clks
- Disable R-Car H3 ES1.*, as it was only available to an internal
development group and needed a lot of quirks and workarounds
- Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
resets on Renesas RZ/V2M
- Add display clocks on Renesas R-Car V4H
- Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
- Free the imx_uart_clocks even if imx_register_uart_clocks returns
early
- Get the stdout clocks count from device tree on i.MX
- Drop the clock count argument from imx_register_uart_clocks()
- Keep the uart clocks on i.MX93 for when earlycon is used
- Fix SPDX comment in i.MX6SLL clocks bindings header
- Drop some unnecessary spaces from i.MX8ULP clocks bindings header
- Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
not configured via devicetree
- Fix the ENET1 gate configuration for i.MX6UL according to the
reference manual
- Add ENET refclock mux support for i.MX6UL
- Add support for USB host/device configuration on Renesas RZ/N1
- Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car
V4H
- Add D1 CAN bus gates and resets for Allwinner
- Mark D1 CPUX clock as critical on Allwinner
- Reuse D1 driver for Allwinner R528/T113
- Cleanup sunxi-ng Kconfig
- Fix sunxi-ng kernel-doc issues
- Model Allwinner H3/H5 DRAM clock as fixed clock
- Use .determine_rate() instead of .round_rate() for the dualdiv,
mpll, sclk-div and cpu-dyn-div amlogic clock drivers
- DDR clocks were marked as critical in the proper clock driver for
each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
in the next releases as it only does clock enablement
- Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some
of them may use it
- Support synchronous power_off requests in the qcom GDSC driver for
proper GPU power collapse
- Drop test clocks from various Qualcomm clk drivers
- Update parent references to use clk_parent_data/clk_hw in various
Qualcomm clk drivers
- Fixes for the Qualcomm MSM8996 CPU clock controller
- Transition Qualcomm MSM8974 GCC off the externally defined
sleep_clk
- Add GDSCs in the global clock controller for Qualcomm QCS404
- The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
- Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and
SDM845 are moved to use the recently introduced properties in the
GDSC struct
- Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and
the IPA clock is added on a variety of platforms
- De-duplicate identical clks in Qualcomm SMD RPM clk driver
- Add a few missing clocks across msm8998, msm8992, msm8916, qcs404
to Qualcomm SDM RPM clk driver
- Various Qualcomm clk drivers use devm_pm_runtime_enable() to
simplify"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits)
clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
clk: qcom: Revert sync_state based clk_disable_unused
clk: imx: pll14xx: fix recalc_rate for negative kdiv
clk: rs9: Drop unused pin_xin field
MAINTAINERS: clk: imx: Add Peng Fan as reviewer
clk: sprd: Add dependency for SPRD_UMS512_CLK
clk: ralink: fix 'mt7621_gate_is_enabled()' function
clk: mediatek: clk-mtk: Remove unneeded semicolon
dt-bindings: clock: remove stih416 bindings
dt-bindings: clock: add loongson-2 clock
dt-bindings: clock: add loongson-2 clock include file
clk: imx: fix compile testing imxrt1050
clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
clk: qcom: cpu-8996: add missing cputype include
...
Pull devicetree updates from Rob Herring:
"DT core:
- Add node lifecycle unit tests
- Add of_property_present() helper aligned with fwnode API
- Print more information on reserved regions on boot
- Update dtc to upstream v1.6.1-66-gabbd523bae6e
- Use strscpy() to instead of strncpy() in DT core
- Add option for schema validation on %.dtb targets
Bindings:
- Add/fix support for listing multiple patterns in DT_SCHEMA_FILES
- Rework external memory controller/bus bindings to properly support
controller specific child node properties
- Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip
RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT
schema format
- Add RiscV SBI PMU event mapping binding
- Add missing contraints on Arm SCMI child node allowed properties
- Add a bunch of missing Socionext UniPhier glue block bindings and
example fixes
- Various fixes for duplicate or conflicting type definitions on DT
properties"
* tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
dt-bindings: regulator: Add mps,mpq7932 power-management IC
of: dynamic: Fix spelling mistake "kojbect" -> "kobject"
dt-bindings: drop Sagar Kadam from SiFive binding maintainership
dt-bindings: sram: qcom,imem: document sm8450
dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema
dt-bindings: arm: Add Cortex-A715 and X3
of: dynamic: add lifecycle docbook info to node creation functions
of: add consistency check to of_node_release()
of: do not use "%pOF" printk format on node with refcount of zero
of: unittest: add node lifecycle tests
of: update kconfig unittest help
of: add processing of EXPECT_NOT to of_unittest_expect
of: prepare to add processing of EXPECT_NOT to of_unittest_expect
of: Use preferred of_property_read_* functions
of: Use of_property_present() helper
of: Add of_property_present() helper
of: reserved_mem: Use proper binary prefix
dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES
of: reserved-mem: print out reserved-mem details during boot
dt-bindings: serial: restrict possible child node names
...
