c38b8400aef99d63be2b1ff131bb993465dcafe1
25498 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jean-Philippe Brucker
|
c38b8400ae |
KVM: arm64: vgic: Fix locking comment
It is now config_lock that must be held, not kvm lock. Replace the
comment with a lockdep annotation.
Fixes:
|
||
|
Jean-Philippe Brucker
|
9cf2f840c4 |
KVM: arm64: vgic: Wrap vgic_its_create() with config_lock
vgic_its_create() changes the vgic state without holding the
config_lock, which triggers a lockdep warning in vgic_v4_init():
[ 358.667941] WARNING: CPU: 3 PID: 178 at arch/arm64/kvm/vgic/vgic-v4.c:245 vgic_v4_init+0x15c/0x7a8
...
[ 358.707410] vgic_v4_init+0x15c/0x7a8
[ 358.708550] vgic_its_create+0x37c/0x4a4
[ 358.709640] kvm_vm_ioctl+0x1518/0x2d80
[ 358.710688] __arm64_sys_ioctl+0x7ac/0x1ba8
[ 358.711960] invoke_syscall.constprop.0+0x70/0x1e0
[ 358.713245] do_el0_svc+0xe4/0x2d4
[ 358.714289] el0_svc+0x44/0x8c
[ 358.715329] el0t_64_sync_handler+0xf4/0x120
[ 358.716615] el0t_64_sync+0x190/0x194
Wrap the whole of vgic_its_create() with config_lock since, in addition
to calling vgic_v4_init(), it also modifies the global kvm->arch.vgic
state.
Fixes:
|
||
|
Jean-Philippe Brucker
|
59112e9c39 |
KVM: arm64: vgic: Fix a circular locking issue
Lockdep reports a circular lock dependency between the srcu and the
config_lock:
[ 262.179917] -> #1 (&kvm->srcu){.+.+}-{0:0}:
[ 262.182010] __synchronize_srcu+0xb0/0x224
[ 262.183422] synchronize_srcu_expedited+0x24/0x34
[ 262.184554] kvm_io_bus_register_dev+0x324/0x50c
[ 262.185650] vgic_register_redist_iodev+0x254/0x398
[ 262.186740] vgic_v3_set_redist_base+0x3b0/0x724
[ 262.188087] kvm_vgic_addr+0x364/0x600
[ 262.189189] vgic_set_common_attr+0x90/0x544
[ 262.190278] vgic_v3_set_attr+0x74/0x9c
[ 262.191432] kvm_device_ioctl+0x2a0/0x4e4
[ 262.192515] __arm64_sys_ioctl+0x7ac/0x1ba8
[ 262.193612] invoke_syscall.constprop.0+0x70/0x1e0
[ 262.195006] do_el0_svc+0xe4/0x2d4
[ 262.195929] el0_svc+0x44/0x8c
[ 262.196917] el0t_64_sync_handler+0xf4/0x120
[ 262.198238] el0t_64_sync+0x190/0x194
[ 262.199224]
[ 262.199224] -> #0 (&kvm->arch.config_lock){+.+.}-{3:3}:
[ 262.201094] __lock_acquire+0x2b70/0x626c
[ 262.202245] lock_acquire+0x454/0x778
[ 262.203132] __mutex_lock+0x190/0x8b4
[ 262.204023] mutex_lock_nested+0x24/0x30
[ 262.205100] vgic_mmio_write_v3_misc+0x5c/0x2a0
[ 262.206178] dispatch_mmio_write+0xd8/0x258
[ 262.207498] __kvm_io_bus_write+0x1e0/0x350
[ 262.208582] kvm_io_bus_write+0xe0/0x1cc
[ 262.209653] io_mem_abort+0x2ac/0x6d8
[ 262.210569] kvm_handle_guest_abort+0x9b8/0x1f88
[ 262.211937] handle_exit+0xc4/0x39c
[ 262.212971] kvm_arch_vcpu_ioctl_run+0x90c/0x1c04
[ 262.214154] kvm_vcpu_ioctl+0x450/0x12f8
[ 262.215233] __arm64_sys_ioctl+0x7ac/0x1ba8
[ 262.216402] invoke_syscall.constprop.0+0x70/0x1e0
[ 262.217774] do_el0_svc+0xe4/0x2d4
[ 262.218758] el0_svc+0x44/0x8c
[ 262.219941] el0t_64_sync_handler+0xf4/0x120
[ 262.221110] el0t_64_sync+0x190/0x194
Note that the current report, which can be triggered by the vgic_irq
kselftest, is a triple chain that includes slots_lock, but after
inverting the slots_lock/config_lock dependency, the actual problem
reported above remains.
In several places, the vgic code calls kvm_io_bus_register_dev(), which
synchronizes the srcu, while holding config_lock (#1). And the MMIO
handler takes the config_lock while holding the srcu read lock (#0).
Break dependency #1, by registering the distributor and redistributors
without holding config_lock. The ITS also uses kvm_io_bus_register_dev()
but already relies on slots_lock to serialize calls.
The distributor iodev is created on the first KVM_RUN call. Multiple
threads will race for vgic initialization, and only the first one will
see !vgic_ready() under the lock. To serialize those threads, rely on
slots_lock rather than config_lock.
Redistributors are created earlier, through KVM_DEV_ARM_VGIC_GRP_ADDR
ioctls and vCPU creation. Similarly, serialize the iodev creation with
slots_lock, and the rest with config_lock.
Fixes:
|
||
Marc Zyngier
|
c3a62df457 |
Merge branch kvm-arm64/pgtable-fixes-6.4 into kvmarm-master/fixes
* kvm-arm64/pgtable-fixes-6.4: : . : Fixes for concurrent S2 mapping race from Oliver: : : "So it appears that there is a race between two parallel stage-2 map : walkers that could lead to mapping the incorrect PA for a given IPA, as : the IPA -> PA relationship picks up an unintended offset. This series : eliminates the problem by using the current IPA of the walk as the : source-of-truth regarding where we are in a map operation." : . KVM: arm64: Constify start/end/phys fields of the pgtable walker data KVM: arm64: Infer PA offset from VA in hyp map walker KVM: arm64: Infer the PA offset from IPA in stage-2 map walker Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Marc Zyngier
|
9a48c597d6 |
Merge branch kvm-arm64/misc-6.4 into kvmarm-master/fixes
* kvm-arm64/misc-6.4: : . : Minor changes for 6.4: : : - Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...) : : - FP/SVE/SME documentation update, in the hope that this field : becomes clearer... : : - Add workaround for the usual Apple SEIS brokenness : : - Random comment fixes : . KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations KVM: arm64: Clarify host SME state management KVM: arm64: Restructure check for SVE support in FP trap handler KVM: arm64: Document check for TIF_FOREIGN_FPSTATE KVM: arm64: Fix repeated words in comments KVM: arm64: Use the bitmap API to allocate bitmaps KVM: arm64: Slightly optimize flush_context() Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Marc Zyngier
|
e910baa9c1 |
KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations
Unsurprisingly, the M2 PRO is also affected by the SEIS bug, so add it to the naughty list. And since M2 MAX is likely to be of the same ilk, flag it as well. Tested on a M2 PRO mini machine. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20230501182141.39770-1-maz@kernel.org |
||
Linus Torvalds
|
b115d85a95 |
Merge tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
primitive, which will be used in perf events ring-buffer code
- Simplify/modify rwsems on PREEMPT_RT, to address writer starvation
- Misc cleanups/fixes
* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: Correct (cmp)xchg() instrumentation
locking/x86: Define arch_try_cmpxchg_local()
locking/arch: Wire up local_try_cmpxchg()
locking/generic: Wire up local{,64}_try_cmpxchg()
locking/atomic: Add generic try_cmpxchg{,64}_local() support
locking/rwbase: Mitigate indefinite writer starvation
locking/arch: Rename all internal __xchg() names to __arch_xchg()
|
||
|
Linus Torvalds
|
671e148d07 |
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon: "A few arm64 fixes that came in during the merge window for -rc1. The main thing is restoring the pointer authentication hwcaps, which disappeared during some recent refactoring - Fix regression in CPU erratum workaround when disabling the MMU - Fix detection of pointer authentication hwcaps - Avoid writeable, executable ELF sections in vmlinux" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: lds: move .got section out of .text arm64: kernel: remove SHF_WRITE|SHF_EXECINSTR from .idmap.text arm64: cpufeature: Fix pointer auth hwcaps arm64: Fix label placement in record_mmu_state() |
||
|
Linus Torvalds
|
29ee463d6f |
Merge tag 'for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux
Pull hardware timestamp engine updates from Dipen Patel: "The changes for the hte subsystem include: - Add Tegra234 HTE provider and relevant DT bindings - Update MAINTAINERS file for the HTE subsystem" * tag 'for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux: hte: tegra-194: Use proper includes hte: Use device_match_of_node() hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id() hte: tegra: fix 'struct of_device_id' build error hte: Use of_property_present() for testing DT property presence gpio: tegra186: Add Tegra234 hte support hte: handle nvidia,gpio-controller property hte: Deprecate nvidia,slices property hte: Add Tegra234 provider hte: Re-phrase tegra API document arm64: tegra: Add Tegra234 GTE nodes dt-bindings: timestamp: Deprecate nvidia,slices property dt-bindings: timestamp: Add Tegra234 support MAINTAINERS: Add HTE/timestamp subsystem details |
||
Fangrui Song
|
0fddb79bf2 |
arm64: lds: move .got section out of .text
Currently, the .got section is placed within the output section .text. However, when .got is non-empty, the SHF_WRITE flag is set for .text when linked by lld. GNU ld recognizes .text as a special section and ignores the SHF_WRITE flag. By renaming .text, we can also get the SHF_WRITE flag. The kernel has performed R_AARCH64_RELATIVE resolving very early, and can then assume that .got is read-only. Let's move .got to the vmlinux_rodata pseudo-segment. As Ard Biesheuvel notes: "This matters to consumers of the vmlinux ELF representation of the kernel image, such as syzkaller, which disregards writable PT_LOAD segments when resolving code symbols. The kernel itself does not care about this distinction, but given that the GOT contains data and not code, it does not require executable permissions, and therefore does not belong in .text to begin with." Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Fangrui Song <maskray@google.com> Link: https://lore.kernel.org/r/20230502074105.1541926-1-maskray@google.com Signed-off-by: Will Deacon <will@kernel.org> |
||
ndesaulniers@google.com
|
4df69e0df2 |
arm64: kernel: remove SHF_WRITE|SHF_EXECINSTR from .idmap.text
commit |
||
Kristina Martsenko
|
eda081d2ef |
arm64: cpufeature: Fix pointer auth hwcaps
The pointer auth hwcaps are not getting reported to userspace, as they
are missing the .matches field. Add the field back.
Fixes:
|
||
|
Linus Torvalds
|
c8c655c34e |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
|
||
|
Linus Torvalds
|
58390c8ce1 |
Merge tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
|
||
|
Linus Torvalds
|
825a0714d2 |
Merge tag 'efi-next-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel: - relocate the LoongArch kernel if the preferred address is already occupied - implement BTI annotations for arm64 EFI stub and zboot images - clean up arm64 zboot Kbuild rules for injecting the kernel code size * tag 'efi-next-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/zboot: arm64: Grab code size from ELF symbol in payload efi/zboot: arm64: Inject kernel code size symbol into the zboot payload efi/zboot: Set forward edge CFI compat header flag if supported efi/zboot: Add BSS padding before compression arm64: efi: Enable BTI codegen and add PE/COFF annotation efi/pe: Import new BTI/IBT header flags from the spec efi/loongarch: Reintroduce efi_relocate_kernel() to relocate kernel |
||
Andrzej Hajda
|
068550631f |
locking/arch: Rename all internal __xchg() names to __arch_xchg()
Decrease the probability of this internal facility to be used by driver code. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Palmer Dabbelt <palmer@rivosinc.com> [riscv] Link: https://lore.kernel.org/r/20230118154450.73842-1-andrzej.hajda@intel.com Cc: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
f20730efbd |
Merge tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP cross-CPU function-call updates from Ingo Molnar: - Remove diagnostics and adjust config for CSD lock diagnostics - Add a generic IPI-sending tracepoint, as currently there's no easy way to instrument IPI origins: it's arch dependent and for some major architectures it's not even consistently available. * tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: trace,smp: Trace all smp_function_call*() invocations trace: Add trace_ipi_send_cpu() sched, smp: Trace smp callback causing an IPI smp: reword smp call IPI comment treewide: Trace IPIs sent via smp_send_reschedule() irq_work: Trace self-IPIs sent via arch_irq_work_raise() smp: Trace IPIs sent via arch_send_call_function_ipi_mask() sched, smp: Trace IPIs sent via send_call_function_single_ipi() trace: Add trace_ipi_send_cpumask() kernel/smp: Make csdlock_debug= resettable locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging locking/csd_lock: Remove added data from CSD lock debugging locking/csd_lock: Add Kconfig option for csd_debug default |
||
|
Linus Torvalds
|
2aff7c706c |
Merge tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
|
||
|
Linus Torvalds
|
22b8cc3e78 |
Merge tag 'x86_mm_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 LAM (Linear Address Masking) support from Dave Hansen: "Add support for the new Linear Address Masking CPU feature. This is similar to ARM's Top Byte Ignore and allows userspace to store metadata in some bits of pointers without masking it out before use" * tag 'x86_mm_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/iommu/sva: Do not allow to set FORCE_TAGGED_SVA bit from outside x86/mm/iommu/sva: Fix error code for LAM enabling failure due to SVA selftests/x86/lam: Add test cases for LAM vs thread creation selftests/x86/lam: Add ARCH_FORCE_TAGGED_SVA test cases for linear-address masking selftests/x86/lam: Add inherit test cases for linear-address masking selftests/x86/lam: Add io_uring test cases for linear-address masking selftests/x86/lam: Add mmap and SYSCALL test cases for linear-address masking selftests/x86/lam: Add malloc and tag-bits test cases for linear-address masking x86/mm/iommu/sva: Make LAM and SVA mutually exclusive iommu/sva: Replace pasid_valid() helper with mm_valid_pasid() mm: Expose untagging mask in /proc/$PID/status x86/mm: Provide arch_prctl() interface for LAM x86/mm: Reduce untagged_addr() overhead for systems without LAM x86/uaccess: Provide untagged_addr() and remove tags before address check mm: Introduce untagged_addr_remote() x86/mm: Handle LAM on context switch x86: CPUID and CR3/CR4 flags for Linear Address Masking x86: Allow atomic MM_CONTEXT flags setting x86/mm: Rework address range check in get_user() and put_user() |
||
|
Linus Torvalds
|
7fa8a8ee94 |
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
||
|
Linus Torvalds
|
b6a7828502 |
Merge tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
|
||
|
Linus Torvalds
|
556eb8b791 |
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ... |
||
|
Linus Torvalds
|
b39667abcd |
Merge tag 'tty-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH: "Here is the big set of tty/serial driver updates for 6.4-rc1. Nothing major, just lots of tiny, constant, forward development. This includes: - obligatory n_gsm updates and feature additions - 8250_em driver updates - sh-sci driver updates - dts cleanups and updates - general cleanups and improvements by Ilpo and Jiri - other small serial driver core fixes and driver updates All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (87 commits) n_gsm: Use array_index_nospec() with index that comes from userspace tty: vt: drop checks for undefined VT_SINGLE_DRIVER tty: vt: distribute EXPORT_SYMBOL() tty: vt: simplify some cases in tioclinux() tty: vt: reformat tioclinux() tty: serial: sh-sci: Fix end of transmission on SCI tty: serial: sh-sci: Add support for tx end interrupt handling tty: serial: sh-sci: Fix TE setting on SCI IP tty: serial: sh-sci: Add RZ/G2L SCIFA DMA rx support tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support serial: max310x: fix IO data corruption in batched operations serial: core: Disable uart_start() on uart_remove_one_port() serial: 8250: Reinit port->pm on port specific driver unbind serial: 8250: Add missing wakeup event reporting tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform tty: serial: fsl_lpuart: adjust buffer length to the intended size serial: fix TIOCSRS485 locking serial: make SiFive serial drivers depend on ARCH_ symbols tty: synclink_gt: don't allocate and pass dummy flags tty: serial: simplify qcom_geni_serial_send_chunk_fifo() ... |
||
|
Linus Torvalds
|
4010e62b5b |
Merge tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH: "Here is the large set of USB and Thunderbolt changes for 6.4-rc1. The "biggest" thing in here is the removal of two obsolete drivers, u132-hcd and ftdi-elan, making this a net-removal of code overall. Other than the driver removals, included in here are: - Thunderbolt updates for new hardware and features - xhci driver updates and fixes - dwc3 driver updates and fixes - gadget core and driver updates and features added - mtu3 driver updates - dwc2 driver fixes and updates - usb-serial driver updates - typec driver updates and fixes - platform remove callback changes - dts updates and conversions - other small changes All have been in linux-next for a while with no reported problems" * tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits) usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API usb: dwc3: gadget: Execute gadget stop after halting the controller media: radio-shark: Add endpoint checks USB: sisusbvga: Add endpoint checks USB: core: Add routines for endpoint checks in old drivers usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk usb: dwc3: core: add support for disabling High-speed park mode dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs usb: mtu3: add optional clock xhci_ck and frmcnt_ck dt-bindings: usb: mtu3: add two optional clocks usb: mtu3: expose role-switch control to userspace usb: mtu3: unlock @mtu->lock just before giving back request usb: mtu3: fix kernel panic at qmu transfer done irq handler usb: mtu3: use boolean return value usb: mtu3: give back request when rx error happens usb: chipidea: fix missing goto in `ci_hdrc_probe` usb: gadget: udc: core: Prevent redundant calls to pullup usb: gadget: udc: core: Invoke usb_gadget_connect only when started usb: typec: ucsi: don't print PPM init deferred errors ... |
||
|
Linus Torvalds
|
6e98b09da9 |
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
||
Dipen Patel
|
29662d6226 |
arm64: tegra: Add Tegra234 GTE nodes
Add GTE LIC and AON GPIO nodes for the tegra234 SoC. Signed-off-by: Dipen Patel <dipenp@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> |
||
Paolo Bonzini
|
4f382a79a6 |
Merge tag 'kvmarm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.4 - Numerous fixes for the pathological lock inversion issue that plagued KVM/arm64 since... forever. - New framework allowing SMCCC-compliant hypercalls to be forwarded to userspace, hopefully paving the way for some more features being moved to VMMs rather than be implemented in the kernel. - Large rework of the timer code to allow a VM-wide offset to be applied to both virtual and physical counters as well as a per-timer, per-vcpu offset that complements the global one. This last part allows the NV timer code to be implemented on top. - A small set of fixes to make sure that we don't change anything affecting the EL1&0 translation regime just after having having taken an exception to EL2 until we have executed a DSB. This ensures that speculative walks started in EL1&0 have completed. - The usual selftest fixes and improvements. |
||
Ard Biesheuvel
|
45dd403da8 |
efi/zboot: arm64: Inject kernel code size symbol into the zboot payload
The EFI zboot code is not built as part of the kernel proper, like the ordinary EFI stub, but still needs access to symbols that are defined only internally in the kernel, and are left unexposed deliberately to avoid creating ABI inadvertently that we're stuck with later. So capture the kernel code size of the kernel image, and inject it as an ELF symbol into the object that contains the compressed payload, where it will be accessible to zboot code that needs it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> |
||
|
Linus Torvalds
|
733f7e9c18 |
Merge tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Total usage stats now include all that returned errors (instead of
just some)
- Remove maximum hash statesize limit
- Add cloning support for hmac and unkeyed hashes
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build
- Add accelerated AES/GCM stitched implementation on powerpc P10
- Add some test vectors for cmac(camellia)
- Remove failure case where jent is unavailable outside of FIPS mode
in drbg
- Add permanent and intermittent health error checks in jitter RNG
Drivers:
- Add support for 402xx devices in qat
- Add support for HiSTB TRNG
- Fix hash concurrency issues in stm32
- Add OP-TEE firmware support in caam"
* tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits)
i2c: designware: Add doorbell support for Mendocino
i2c: designware: Use PCI PSP driver for communication
powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10
crypto: p10-aes-gcm - Remove POWER10_CPU dependency
crypto: testmgr - Add some test vectors for cmac(camellia)
crypto: cryptd - Add support for cloning hashes
crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm
crypto: hmac - Add support for cloning
crypto: hash - Add crypto_clone_ahash/shash
crypto: api - Add crypto_clone_tfm
crypto: api - Add crypto_tfm_get
crypto: x86/sha - Use local .L symbols for code
crypto: x86/crc32 - Use local .L symbols for code
crypto: x86/aesni - Use local .L symbols for code
crypto: x86/sha256 - Use RIP-relative addressing
crypto: x86/ghash - Use RIP-relative addressing
crypto: x86/des3 - Use RIP-relative addressing
crypto: x86/crc32c - Use RIP-relative addressing
crypto: x86/cast6 - Use RIP-relative addressing
crypto: x86/cast5 - Use RIP-relative addressing
...
|
||
Neeraj Upadhyay
|
4e8f6e44bc |
arm64: Fix label placement in record_mmu_state()
Fix label so that pre_disable_mmu_workaround() is called
before clearing sctlr_el1.M.
Fixes:
|
||
|
Linus Torvalds
|
df45da57cb |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"ACPI:
- Improve error reporting when failing to manage SDEI on AGDI device
removal
Assembly routines:
- Improve register constraints so that the compiler can make use of
the zero register instead of moving an immediate #0 into a GPR
- Allow the compiler to allocate the registers used for CAS
instructions
CPU features and system registers:
- Cleanups to the way in which CPU features are identified from the
ID register fields
- Extend system register definition generation to handle Enum types
when defining shared register fields
- Generate definitions for new _EL2 registers and add new fields for
ID_AA64PFR1_EL1
- Allow SVE to be disabled separately from SME on the kernel
command-line
Tracing:
- Support for "direct calls" in ftrace, which enables BPF tracing for
arm64
Kdump:
- Don't bother unmapping the crashkernel from the linear mapping,
which then allows us to use huge (block) mappings and reduce TLB
pressure when a crashkernel is loaded.
Memory management:
- Try again to remove data cache invalidation from the coherent DMA
allocation path
- Simplify the fixmap code by mapping at page granularity
- Allow the kfence pool to be allocated early, preventing the rest of
the linear mapping from being forced to page granularity
Perf and PMU:
- Move CPU PMU code out to drivers/perf/ where it can be reused by
the 32-bit ARM architecture when running on ARMv8 CPUs
- Fix race between CPU PMU probing and pKVM host de-privilege
- Add support for Apple M2 CPU PMU
- Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event
dynamically, depending on what the CPU actually supports
- Minor fixes and cleanups to system PMU drivers
Stack tracing:
- Use the XPACLRI instruction to strip PAC from pointers, rather than
rolling our own function in C
- Remove redundant PAC removal for toolchains that handle this in
their builtins
- Make backtracing more resilient in the face of instrumentation
Miscellaneous:
- Fix single-step with KGDB
- Remove harmless warning when 'nokaslr' is passed on the kernel
command-line
- Minor fixes and cleanups across the board"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
KVM: arm64: Ensure CPU PMU probes before pKVM host de-privilege
arm64: kexec: include reboot.h
arm64: delete dead code in this_cpu_set_vectors()
arm64/cpufeature: Use helper macro to specify ID register for capabilites
drivers/perf: hisi: add NULL check for name
drivers/perf: hisi: Remove redundant initialized of pmu->name
arm64/cpufeature: Consistently use symbolic constants for min_field_value
arm64/cpufeature: Pull out helper for CPUID register definitions
arm64/sysreg: Convert HFGITR_EL2 to automatic generation
ACPI: AGDI: Improve error reporting for problems during .remove()
arm64: kernel: Fix kernel warning when nokaslr is passed to commandline
perf/arm-cmn: Fix port detection for CMN-700
arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step
arm64: move PAC masks to <asm/pointer_auth.h>
arm64: use XPACLRI to strip PAC
arm64: avoid redundant PAC stripping in __builtin_return_address()
arm64/sme: Fix some comments of ARM SME
arm64/signal: Alloc tpidr2 sigframe after checking system_supports_tpidr2()
arm64/signal: Use system_supports_tpidr2() to check TPIDR2
arm64/idreg: Don't disable SME when disabling SVE
...
|
||
|
Linus Torvalds
|
53b5e72b9d |
Merge tag 'asm-generic-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann: "These are various cleanups, fixing a number of uapi header files to no longer reference CONFIG_* symbols, and one patch that introduces the new CONFIG_HAS_IOPORT symbol for architectures that provide working inb()/outb() macros, as a preparation for adding driver dependencies on those in the following release" * tag 'asm-generic-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: Kconfig: introduce HAS_IOPORT option and select it as necessary scripts: Update the CONFIG_* ignore list in headers_install.sh pktcdvd: Remove CONFIG_CDROM_PKTCDVD_WCACHE from uapi header Move bp_type_idx to include/linux/hw_breakpoint.h Move ep_take_care_of_epollwakeup() to fs/eventpoll.c Move COMPAT_ATM_ADDPARTY to net/atm/svc.c |
||
|
Linus Torvalds
|
d53c3eaaef |
Merge tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek,
NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These
all add new features for existing machines, as well as new machines
and SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1
chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its
JH7100 predecessor, but with additional CPU cores and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini gets
added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on
the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the Snapdragon
family.
Including the initial board support for the added SoC platforms, there
are 52 new machines. The largest group are 19 boards industrial
embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit)
families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X)
SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs, including
the rk3588s-khadas-edge2 and a few NanoPi models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete 'oxnas'
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the
Qualcomm Sc7180 'trogdor' design that were never part of products"
* tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits)
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
ARM: dts: nomadik: Replace deprecated spi-gpio properties
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: rockchip: add panel to Anbernic RG353 series
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
...
|
||
|
Linus Torvalds
|
672d2dae19 |
Merge tag 'soc-defconfig-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann: "Most of the changes just enable additional device drivers that were added or that are often used on major platforms. The virtconfig added last time now disables additional drivers to shrink kernels for virtual machines. The obsolete oxnas_v6_defconfig file is removed in turn" * tag 'soc-defconfig-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits) ARM: config: Update Vexpress defconfig arm64: defconfig: enable building the nvmem-reboot-mode module arm64: defconfig: Enable TI ADC driver arm64: defconfig: Enable TI TSCADC driver arm64: defconfig: Enable security accelerator driver for TI K3 SoCs arm64: defconfig: Enable crypto test module ARM: multi_v7_defconfig: Add OPTEE support ARM: configs: Update U8500 defconfig ARM: imx_v4_v5_defconfig: Build CONFIG_IMX_SDMA as module arm64: defconfig: Enable IPQ9574 SoC base configs ARM: imx_v6_v7_defconfig: Enable Tarragon peripheral drivers arm64: defconfig: Enable ARM CoreSight PMU driver arm64: defconfig: remove duplicate TYPEC_UCSI & QCOM_PMIC_GLINK ARM: configs: remove oxnas_v6_defconfig arm64: defconfig: Enable audio drivers for AM62-SK arm64: defconfig: Enable drivers for BeaglePlay ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_I2C_NXP_TDA998X arm64: defconfig: Enable Virtio RNG driver as built in arm64: defconfig: Enable CAN PHY transceiver driver arm64: defconfig: add PMIC GLINK modules ... |
||
|
Linus Torvalds
|
e7989789c6 |
Merge tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relocations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they
fail to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up in
the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context of
different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource
is installed, i.e. timekeeping is still tick based and the tick
period advances from there.
The early enablement of sched_clock() broke this alignement as the
time accumulated by sched_clock() is taken into account when
timekeeping is initialized. So the base value now(CLOCK_MONOTONIC) is
not longer a multiple of tick periods, which breaks applications
which relied on that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements:
* Cure the concurrent writer race for idle and IO sleeptime
statistics
The statitic values which are exposed via /proc/stat are updated
from the CPU local idle exit and remotely by cpufreq, but that
happens without any form of serialization. As a consequence
sleeptimes can be accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
* Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race
with idle exit updates. As a consequence the readout may result
in random and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing
the remote runqueues nr_iowait counter. The latter is impossible
to fix, so the only way to deal with that is to document it
properly and to remove the assertion in the selftest which
triggers occasionally due to that.
* Restructure struct tick_sched for better cache layout
* Some small cleanups and a better cache layout for struct
tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU
timers
For unknown reason the introduction of the timer_wait_running()
callback missed to fixup posix CPU timers, which went unnoticed for
almost four years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels,
it turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled
systems there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU
timers out from hard interrupt context to task work, which is handled
before returning to user space or to a VM. The expiry mechanism moves
the expired timers to a stack local list head with sighand lock held.
Once sighand is dropped the task can be preempted and a task which
wants to delete a timer will spin-wait until the expiry task is
scheduled back in. In the worst case this will end up in a livelock
when the preempting task and the expiry task are pinned on the same
CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which
uses a per CPU timer-base expiry lock which is held by the expiry
code and the task waiting for the timer function to complete blocks
on that lock.
This does not work in the same way for posix CPU timers as there is
no timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry
lock can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry
task hold it accross the expiry function and let the deleting task
which waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra
mutex_lock()/unlock() pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents
the livelock and cures the problem for RT and !RT systems
* tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Implement the missing timer_wait_running callback
selftests/proc: Assert clock_gettime(CLOCK_BOOTTIME) VS /proc/uptime monotonicity
selftests/proc: Remove idle time monotonicity assertions
MAINTAINERS: Remove stale email address
timers/nohz: Remove middle-function __tick_nohz_idle_stop_tick()
timers/nohz: Add a comment about broken iowait counter update race
timers/nohz: Protect idle/iowait sleep time under seqcount
timers/nohz: Only ever update sleeptime from idle exit
timers/nohz: Restructure and reshuffle struct tick_sched
tick/common: Align tick period with the HZ tick.
selftests/timers/posix_timers: Test delivery of signals across threads
posix-timers: Prefer delivery of signals to the current thread
vdso: Improve cmd_vdso_check to check all dynamic relocations
|
||
|
Linus Torvalds
|
3f614ab563 |
Merge tag 'irq-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt updates from Thomas Gleixner:
"Core:
- Add tracepoints for tasklet callbacks which makes it possible to
analyze individual tasklet functions instead of guess working from
the overall duration of tasklet processing
- Ensure that secondary interrupt threads have their affinity
adjusted correctly
Drivers:
- A large rework of the RISC-V IPI management to prepare for a new
RISC-V interrupt architecture
- Small fixes and enhancements all over the place
- Removal of support for various obsolete hardware platforms and the
related code"
* tag 'irq-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip/st: Remove stih415/stih416 and stid127 platforms support
irqchip/gic-v3: Add Rockchip 3588001 erratum workaround
genirq: Update affinity of secondary threads
softirq: Add trace points for tasklet entry/exit
irqchip/loongson-pch-pic: Fix pch_pic_acpi_init calling
irqchip/loongson-pch-pic: Fix registration of syscore_ops
irqchip/loongson-eiointc: Fix registration of syscore_ops
irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent
irqchip/loongson-eiointc: Fix returned value on parsing MADT
irqchip/riscv-intc: Add empty irq_eoi() for chained irq handlers
RISC-V: Use IPIs for remote icache flush when possible
RISC-V: Use IPIs for remote TLB flush when possible
RISC-V: Allow marking IPIs as suitable for remote FENCEs
RISC-V: Treat IPIs as normal Linux IRQs
irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
RISC-V: Clear SIP bit only when using SBI IPI operations
irqchip/irq-sifive-plic: Add syscore callbacks for hibernation
irqchip: Use of_property_read_bool() for boolean properties
irqchip/bcm-6345-l1: Request memory region
irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4
...
|
||
|
Linus Torvalds
|
5dfb75e842 |
Merge tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux
Pull RCU updates from Joel Fernandes:
- Updates and additions to MAINTAINERS files, with Boqun being added to
the RCU entry and Zqiang being added as an RCU reviewer.
I have also transitioned from reviewer to maintainer; however, Paul
will be taking over sending RCU pull-requests for the next merge
window.
- Resolution of hotplug warning in nohz code, achieved by fixing
cpu_is_hotpluggable() through interaction with the nohz subsystem.
Tick dependency modifications by Zqiang, focusing on fixing usage of
the TICK_DEP_BIT_RCU_EXP bitmask.
- Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
kernels, fixed by Zqiang.
- Improvements to rcu-tasks stall reporting by Neeraj.
- Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
increased robustness, affecting several components like mac802154,
drbd, vmw_vmci, tracing, and more.
A report by Eric Dumazet showed that the API could be unknowingly
used in an atomic context, so we'd rather make sure they know what
they're asking for by being explicit:
https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/
- Documentation updates, including corrections to spelling,
clarifications in comments, and improvements to the srcu_size_state
comments.
- Better srcu_struct cache locality for readers, by adjusting the size
of srcu_struct in support of SRCU usage by Christoph Hellwig.
- Teach lockdep to detect deadlocks between srcu_read_lock() vs
synchronize_srcu() contributed by Boqun.
Previously lockdep could not detect such deadlocks, now it can.
- Integration of rcutorture and rcu-related tools, targeted for v6.4
from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
module parameter, and more
- Miscellaneous changes, various code cleanups and comment improvements
* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
checkpatch: Error out if deprecated RCU API used
mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
rcu/trace: use strscpy() to instead of strncpy()
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
...
|
||
Chris Morgan
|
b6986b7920 |
arm64: dts: rockchip: Update compatible for bluetooth
Update the compatible for the Realtek RTL8821CS bluetooth node. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
||
|
Linus Torvalds
|
2caeeb9d4a |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two serious ARM fixes:
- Plug a buffer overflow due to the use of the user-provided register
width for firmware regs. Outright reject accesses where the user
register width does not match the kernel representation.
- Protect non-atomic RMW operations on vCPU flags against preemption,
as an update to the flags by an intervening preemption could be
lost"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Fix buffer overflow in kvm_arm_set_fw_reg()
KVM: arm64: Make vcpu flag updates non-preemptible
|
||
|
Paolo Bonzini
|
265b97cbc2 |
Merge tag 'kvmarm-fixes-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #4 - Plug a buffer overflow due to the use of the user-provided register width for firmware regs. Outright reject accesses where the user register width does not match the kernel representation. - Protect non-atomic RMW operations on vCPU flags against preemption, as an update to the flags by an intervening preemption could be lost. |
||
Thomas Gleixner
|
f37202aa6e |
Merge tag 'irqchip-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip changes from Marc Zyngier: - Large RISC-V IPI rework to make way for a new interrupt architecture - More Loongarch fixes from Lianmin Lv, fixing issues in the so called "dual-bridge" systems. - Workaround for the nvidia T241 chip that gets confused in 3 and 4 socket configurations, leading to the GIC malfunctionning in some contexts - Drop support for non-firmware driven GIC configurarations now that the old ARM11MP Cavium board is gone - Workaround for the Rockchip 3588 chip that doesn't correctly deal with the shareability attributes. - Replace uses of of_find_property() with the more appropriate of_property_read_bool() - Make bcm-6345-l1 request its MMIO region - Add suspend support to the SiFive PLIC - Drop support for stih415, stih416 and stid127 platforms Link: https://lore.kernel.org/lkml/20230421132104.3021536-1-maz@kernel.org |
||
|
Marc Zyngier
|
f39157b3c0 |
Merge branch irq/gic-6.4 into irq/irqchip-next
* irq/gic-6.4: : . : Collection of GIC/GICv3 fixes and cleanups : : - Workaround for the nvidia T241 chip that gets confused : in 3 and 4 socket configurations, leading to the GIC : malfunctionning in some contexts : : - Drop support for non-firmware driven GIC configurarations : now that the old ARM11MP Cavium board is gone : : - Workaround for the Rockchip 3588 chip that doesn't : correctly deal with the shareability attributes. : . irqchip/gic-v3: Add Rockchip 3588001 erratum workaround irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4 irqchip/gic: Drop support for board files Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
Mark Brown
|
aaa2f14e6f |
KVM: arm64: Clarify host SME state management
Normally when running a guest we do not touch the floating point register state until first use of floating point by the guest, saving the current state and loading the guest state at that point. This has been found to offer a performance benefit in common cases. However currently if SME is active when switching to a guest then we exit streaming mode, disable ZA and invalidate the floating point register state prior to starting the guest. The exit from streaming mode is required for correct guest operation, if we leave streaming mode enabled then many non-SME operations can generate SME traps (eg, SVE operations will become streaming SVE operations). If EL1 leaves CPACR_EL1.SMEN disabled then the host is unable to intercept these traps. This will mean that a SME unaware guest will see SME exceptions which will confuse it. Disabling streaming mode also avoids creating spurious indications of usage of the SME hardware which could impact system performance, especially with shared SME implementations. Document the requirement to exit streaming mode clearly. There is no issue with guest operation caused by PSTATE.ZA so we can defer handling for that until first floating point usage, do so if the register state is not that of the current task and hence has already been saved. We could also do this for the case where the register state is that for the current task however this is very unlikely to happen and would require disproportionate effort so continue to save the state in that case. Saving this state on first use would require that we map and unmap storage for the host version of these registers for use by the hypervisor, taking care to deal with protected KVM and the fact that the host can free or reallocate the backing storage. Given that the strong recommendation is that applications should only keep PSTATE.ZA enabled when the state it enables is in active use it is difficult to see a case where a VMM would wish to do this, it would need to not only be using SME but also running the guest in the middle of SME usage. This can be revisited in the future if a use case does arises, in the interim such tasks will work but experience a performance overhead. This brings our handling of SME more into line with our handling of other floating point state and documents more clearly the constraints we have, especially around streaming mode. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221214-kvm-arm64-sme-context-switch-v2-3-57ba0082e9ff@kernel.org |
||
|
Mark Brown
|
d071cefdcc |
KVM: arm64: Restructure check for SVE support in FP trap handler
We share the same handler for general floating point and SVE traps with a check to make sure we don't handle any SVE traps if the system doesn't have SVE support. Since we will be adding SME support and wishing to handle that along with other FP related traps rewrite the check to be more scalable and a bit clearer too, ensuring we don't misidentify SME traps as SVE ones. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221214-kvm-arm64-sme-context-switch-v2-2-57ba0082e9ff@kernel.org |
||
|
Mark Brown
|
4c181e3d35 |
KVM: arm64: Document check for TIF_FOREIGN_FPSTATE
In kvm_arch_vcpu_load_fp() we unconditionally set the current FP state to FP_STATE_HOST_OWNED, this will be overridden to FP_STATE_NONE if TIF_FOREIGN_FPSTATE is set but the check is deferred until kvm_arch_vcpu_ctxflush_fp() where we are no longer preemptable. Add a comment to this effect to help avoid people being concerned about the lack of a check and discover where the check is done. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221214-kvm-arm64-sme-context-switch-v2-1-57ba0082e9ff@kernel.org |
||
Jingyu Wang
|
3d17935628 |
KVM: arm64: Fix repeated words in comments
Delete the redundant word 'to'. Signed-off-by: Jingyu Wang <jingyuwang_vip@163.com> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230309075919.169518-1-jingyuwang_vip@163.com |
||
|
Marc Zyngier
|
1ea244158a |
KVM: arm64: Constify start/end/phys fields of the pgtable walker data
As we are revamping the way the pgtable walker evaluates some of the data, make it clear that we rely on somew of the fields to be constant across the lifetime of a walk. For this, flag the start, end and phys fields of the walk data as 'const', which will generate an error if we were to accidentally update these fields again. Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
Oliver Upton
|
39bc95be37 |
KVM: arm64: Infer PA offset from VA in hyp map walker
Similar to the recently fixed stage-2 walker, the hyp map walker increments the PA and VA of a walk separately. Unlike stage-2, there is no bug here as the map walker has exclusive access to the stage-1 page tables. Nonetheless, in the interest of continuity throughout the page table code, tweak the hyp map walker to avoid incrementing the PA and instead use the VA as the authoritative source of how far along a table walk has gotten. Calculate the PA to use for a leaf PTE by adding the offset of the VA from the start of the walk to the starting PA. Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230421071606.1603916-3-oliver.upton@linux.dev |
||
|
Oliver Upton
|
1f0f4a2ef7 |
KVM: arm64: Infer the PA offset from IPA in stage-2 map walker
Until now, the page table walker counted increments to the PA and IPA of a walk in two separate places. While the PA is incremented as soon as a leaf PTE is installed in stage2_map_walker_try_leaf(), the IPA is actually bumped in the generic table walker context. Critically, __kvm_pgtable_visit() rereads the PTE after the LEAF callback returns to work out if a table or leaf was installed, and only bumps the IPA for a leaf PTE. This arrangement worked fine when we handled faults behind the write lock, as the walker had exclusive access to the stage-2 page tables. However, commit |
||
|
Marc Zyngier
|
36fe1b29b3 |
Merge branch kvm-arm64/spec-ptw into kvmarm-master/next
* kvm-arm64/spec-ptw: : . : On taking an exception from EL1&0 to EL2(&0), the page table walker is : allowed to carry on with speculative walks started from EL1&0 while : running at EL2 (see R_LFHQG). Given that the PTW may be actively using : the EL1&0 system registers, the only safe way to deal with it is to : issue a DSB before changing any of it. : : We already did the right thing for SPE and TRBE, but ignored the PTW : for unknown reasons (probably because the architecture wasn't crystal : clear at the time). : : This requires a bit of surgery in the nvhe code, though most of these : patches are comments so that my future self can understand the purpose : of these barriers. The VHE code is largely unaffected, thanks to the : DSB in the context switch. : . KVM: arm64: vhe: Drop extra isb() on guest exit KVM: arm64: vhe: Synchronise with page table walker on MMU update KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc() KVM: arm64: nvhe: Synchronise with page table walker on TLBI KVM: arm64: nvhe: Synchronise with page table walker on vcpu run Signed-off-by: Marc Zyngier <maz@kernel.org> |