The memory fill operation (0x04) can fill in memory with either 8 bytes
or 16 bytes of pattern. To fill in memory with 16 bytes of pattern, the
first 8 bytes are provided in pattern lower in bytes 16-23 and the next
8 bytes are in pattern upper in bytes 40-47 in the descriptor. Currently
only 8 bytes of pattern is enabled.
Add descriptor definitions for pattern lower and pattern upper so that
user can use 16 bytes of pattern to fill memory.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230303213413.3357431-2-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Johannes Berg says:
====================
Major stack changes:
* TC offload support for drivers below mac80211
* reduced neighbor report (RNR) handling for AP mode
* mac80211 mesh fast-xmit and fast-rx support
* support for another mesh A-MSDU format
(seems nobody got the spec right)
Major driver changes:
Kalle moved the drivers that were just plain C files
in drivers/net/wireless/ to legacy/ and virtual/ dirs.
hwsim
* multi-BSSID support
* some FTM support
ath11k
* MU-MIMO parameters support
* ack signal support for management packets
rtl8xxxu
* support for RTL8710BU aka RTL8188GU chips
rtw89
* support for various newer firmware APIs
ath10k
* enabled threaded NAPI on WCN3990
iwlwifi
* lots of work for multi-link/EHT (wifi7)
* hardware timestamping support for some devices/firwmares
* TX beacon protection on newer hardware
* tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (181 commits)
wifi: clean up erroneously introduced file
wifi: iwlwifi: mvm: correctly use link in iwl_mvm_sta_del()
wifi: iwlwifi: separate AP link management queues
wifi: iwlwifi: mvm: free probe_resp_data later
wifi: iwlwifi: bump FW API to 75 for AX devices
wifi: iwlwifi: mvm: move max_agg_bufsize into host TLC lq_sta
wifi: iwlwifi: mvm: send full STA during HW restart
wifi: iwlwifi: mvm: rework active links counting
wifi: iwlwifi: mvm: update mac config when assigning chanctx
wifi: iwlwifi: mvm: use the correct link queue
wifi: iwlwifi: mvm: clean up mac_id vs. link_id in MLD sta
wifi: iwlwifi: mvm: fix station link data leak
wifi: iwlwifi: mvm: initialize max_rc_amsdu_len per-link
wifi: iwlwifi: mvm: use appropriate link for rate selection
wifi: iwlwifi: mvm: use the new lockdep-checking macros
wifi: iwlwifi: mvm: remove chanctx WARN_ON
wifi: iwlwifi: mvm: avoid sending MAC context for idle
wifi: iwlwifi: mvm: remove only link-specific AP keys
wifi: iwlwifi: mvm: skip inactive links
wifi: iwlwifi: mvm: adjust iwl_mvm_scan_respect_p2p_go_iter() for MLO
...
====================
Link: https://lore.kernel.org/r/20230330205612.921134-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NFTA_RANGE_OP incorrectly says nft_cmp_ops instead of nft_range_ops.
NFTA_LOG_GROUP and NFTA_LOG_QTHRESHOLD claim NLA_U32 instead of NLA_U16
NFTA_EXTHDR_SREG isn't documented as a register
Signed-off-by: Matthieu De Beule <matthieu.debeule@proton.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
This enables associating a socket with a v1 net_cls cgroup. Useful for
applying a per-cgroup policy when processing packets in userspace.
Signed-off-by: Eric Sage <eric_sage@apple.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.
Address the following warning found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
net/ipv6/exthdrs.c: In function ‘fl6_update_dst’:
net/ipv6/exthdrs.c:1393:28: warning: array subscript 0 is outside array bounds of ‘struct in6_addr[0]’ [-Warray-bounds=]
1393 | fl6->daddr = *((struct rt0_hdr *)opt->srcrt)->addr;
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ./include/linux/ipv6.h:5,
from ./include/linux/icmpv6.h:6,
from net/ipv6/exthdrs.c:27:
./include/uapi/linux/ipv6.h:84:33: note: while referencing ‘addr’
84 | struct in6_addr addr[0];
| ^~~~
net/ipv6/exthdrs.c: In function ‘ipv6_push_rthdr0.isra’:
net/ipv6/exthdrs.c:1125:19: warning: array subscript <unknown> is outside array bounds of ‘struct in6_addr[0]’ [-Warray-bounds=]
1125 | phdr->addr[hops - 1] = **addr_p;
| ~~~~~~~~~~^~~~~~~~~~
./include/uapi/linux/ipv6.h:84:33: note: while referencing ‘addr’
84 | struct in6_addr addr[0];
| ^~~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/276
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
The block core (bio_split_discard) will already split discards based
on the 'discard_granularity' and 'max_discard_sectors' queue_limits.
But the DM thin target also needs to ensure that it doesn't receive a
discard that spans a 'max_discard_sectors' boundary.
Introduce a dm_target 'max_discard_granularity' flag that if set will
cause DM core to split discard bios relative to 'max_discard_sectors'.
This treats 'discard_granularity' as a "min_discard_granularity" and
'max_discard_sectors' as a "max_discard_granularity".
Requested-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
And this is the moment you have all been waiting for: setting the
counter offset from userspace.
We expose a brand new capability that reports the ability to set
the offset for both the virtual and physical sides.
In keeping with the architecture, the offset is expressed as
a delta that is substracted from the physical counter value.
Once this new API is used, there is no going back, and the counters
cannot be written to to set the offsets implicitly (the writes
are instead ignored).
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-8-maz@kernel.org
I just landed the fence deadline PR from Rob that a bunch of drivers
want/need to apply driver-specific patches. Backmerge -rc4 so that
they don't have to be stuck on -rc2 for no reason at all.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This series adds a deadline hint to fences, so realtime deadlines
such as vblank can be communicated to the fence signaller for power/
frequency management decisions.
This is partially inspired by a trick i915 does, but implemented
via dma-fence for a couple of reasons:
1) To continue to be able to use the atomic helpers
2) To support cases where display and gpu are different drivers
See https://patchwork.freedesktop.org/series/93035/
This does not yet add any UAPI, although this will be needed in
a number of cases:
1) Workloads "ping-ponging" between CPU and GPU, where we don't
want the GPU freq governor to interpret time stalled waiting
for GPU as "idle" time
2) Cases where the compositor is waiting for fences to be signaled
before issuing the atomic ioctl, for example to maintain 60fps
cursor updates even when the GPU is not able to maintain that
framerate.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt5nDQpa6J86V1oFKPA30YcJzPhAVpmF7N1K1g2N3c=Zg@mail.gmail.com
Enablements are now tracked by the lifetime of the task/mm. User
processes need to be able to disable their addresses if tracing is
requested to be turned off. Before unmapping the page would suffice.
However, we now need a stronger contract. Add an ioctl to enable this.
A new flag bit is added, freeing, to user_event_enabler to ensure that
if the event is attempted to be removed while a fault is being handled
that the remove is delayed until after the fault is reattempted.
Link: https://lkml.kernel.org/r/20230328235219.203-6-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
As part of the discussions for user_events aligned with user space
tracers, it was determined that user programs should register a aligned
value to set or clear a bit when an event becomes enabled. Currently a
shared page is being used that requires mmap(). Remove the shared page
implementation and move to a user registered address implementation.
In this new model during the event registration from user programs 3 new
values are specified. The first is the address to update when the event
is either enabled or disabled. The second is the bit to set/clear to
reflect the event being enabled. The third is the size of the value at
the specified address.
This allows for a local 32/64-bit value in user programs to support
both kernel and user tracers. As an example, setting bit 31 for kernel
tracers when the event becomes enabled allows for user tracers to use
the other bits for ref counts or other flags. The kernel side updates
the bit atomically, user programs need to also update these values
atomically.
User provided addresses must be aligned on a natural boundary, this
allows for single page checking and prevents odd behaviors such as a
enable value straddling 2 pages instead of a single page. Currently
page faults are only logged, future patches will handle these.
Link: https://lkml.kernel.org/r/20230328235219.203-4-beaub@linux.microsoft.com
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Parameter negotiation has been introduced with
commit 92f1f0c329 ("tty: n_gsm: add parameter negotiation support")
However, means to set individual parameters per DLCI are not yet
implemented. Furthermore, it is currently not possible to keep a DLCI half
open until the user application sets the right parameters for it. This is
required to allow a user application to set its specific parameters before
the underlying link is established. Otherwise, the link is opened and
re-established right afterwards if the user application sets incompatible
parameters. This may be an unexpected behavior for the peer.
Add parameter 'wait_config' to 'gsm_config' to support setups where the
DLCI specific user application sets its specific parameters after open()
and before the link gets fully established. Setting this to zero disables
the user application specific DLCI configuration option.
Add the ioctls 'GSMIOC_GETCONF_DLCI' and 'GSMIOC_SETCONF_DLCI' for the
ldisc and virtual ttys. This gets/sets the DLCI specific parameters and may
trigger a reconnect of the DLCI if incompatible values have been set. Only
the parameters for the DLCI associated with the virtual tty can be set or
retrieved if called on these.
Add remark within the documentation to introduce the new ioctls.
Link: https://lore.kernel.org/oe-kbuild-all/202302281856.S9Lz4gHB-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230315105354.6234-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the broadcast cutoff configurable through netlink. Note
that macvlan is weird because there is no central device for
us to configure (the lowerdev could be anything). So all the
options are duplicated over what could be thousands of child
devices.
IFLA_MACVLAN_BC_QUEUE_LEN took the approach of taking the maximum
of all child device settings. This is unnecessary as we could
simply store the option in the port device and take the last
child device that gets updated as the value to use.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add resize_cq verb support for user space CQs. Resize operation for
kernel CQs are not supported now.
Driver should free the current CQ only after user library polls
for all the completions and switch to new CQ. So after the resize_cq
is returned from the driver, user library polls for existing completions
and store it as temporary data. Once library reaps all completions in the
current CQ, it invokes the ibv_cmd_poll_cq to inform the driver about
the resize_cq completion. Adding a check for user CQs in driver's
poll_cq and complete the resize operation for user CQs.
Updating uverbs_cmd_mask with poll_cq to support this.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1678868215-23626-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This series adds a deadline hint to fences, so realtime deadlines
such as vblank can be communicated to the fence signaller for power/
frequency management decisions.
This is partially inspired by a trick i915 does, but implemented
via dma-fence for a couple of reasons:
1) To continue to be able to use the atomic helpers
2) To support cases where display and gpu are different drivers
See https://patchwork.freedesktop.org/series/93035/
This does not yet add any UAPI, although this will be needed in
a number of cases:
1) Workloads "ping-ponging" between CPU and GPU, where we don't
want the GPU freq governor to interpret time stalled waiting
for GPU as "idle" time
2) Cases where the compositor is waiting for fences to be signaled
before issuing the atomic ioctl, for example to maintain 60fps
cursor updates even when the GPU is not able to maintain that
framerate.
Signed-off-by: Rob Clark <robdclark@chromium.org>
We had all of the internal driver APIs, but not the all important
userspace uABI, in the dma-buf doc. Fix that. And re-arrange the
comments slightly as otherwise the comments for the ioctl nr defines
would not show up.
v2: Fix docs build warning coming from newly including the uabi header
in the docs build
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This attribute, which is part of ethtool's ring param configuration
allows the user to specify the maximum number of the packet's payload
that can be written directly to the device.
Example usage:
# ethtool -G [interface] tx-push-buf-len [number of bytes]
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zero-length arrays as fake flexible arrays are deprecated and we are moving
towards adopting C99 flexible-array members instead.
Address the following warning found with GCC-13 and -fstrict-flex-arrays=3
enabled:
CC drivers/target/target_core_user.o
drivers/target/target_core_user.c: In function ‘queue_cmd_ring’:
drivers/target/target_core_user.c:1096:15: warning: array subscript 0 is outside array bounds of ‘struct iovec[0]’ [-Warray-bounds=]
1096 | iov = &entry->req.iov[0];
| ^~~~~~~~~~~~~~~~~~
In file included from drivers/target/target_core_user.c:31:
./include/uapi/linux/target_core_user.h:122:38: note: while referencing ‘iov’
122 | struct iovec iov[0];
| ^~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help us make progress towards globally enabling
-fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/270
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZBSchMvTdl7VObKI@work
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As per IEEE Std 802.11ax-2021, 11.1.3.8.3 Discovery of a nontransmitted
BSSID profile, an EMA AP that transmits a Beacon frame carrying a partial
list of nontransmitted BSSID profiles should include in the frame
a Reduced Neighbor Report element carrying information for at least the
nontransmitted BSSIDs that are not present in the Multiple BSSID element
carried in that frame.
Add new nested attribute NL80211_ATTR_EMA_RNR_ELEMS to support the above.
Number of RNR elements must be more than or equal to the number of
MBSSID elements. This attribute can be used only when EMA is enabled.
Userspace is responsible for splitting the RNR into multiple elements such
that each element excludes the non-transmitting profiles already included
in the MBSSID element (%NL80211_ATTR_MBSSID_ELEMS) at the same index.
Each EMA beacon will be generated by adding MBSSID and RNR elements
at the same index. If the userspace provides more RNR elements than the
number of MBSSID elements then these will be added in every EMA beacon.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20230323113801.6903-2-quic_alokad@quicinc.com
[Johannes: validate elements]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This series from Or changes default of IB out-of-order feature and
allows to the RDMA users to decide if they need to wait for completion
for all segments or it is enough to wait for last segment completion only.
Thanks
Signed-off-by: Leon Romanovsky <leon@kernel.org>
By improving the BPF_LINK_UPDATE command of bpf(), it should allow you
to conveniently switch between different struct_ops on a single
bpf_link. This would enable smoother transitions from one struct_ops
to another.
The struct_ops maps passing along with BPF_LINK_UPDATE should have the
BPF_F_LINK flag.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230323032405.3735486-6-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Make bpf_link support struct_ops. Previously, struct_ops were always
used alone without any associated links. Upon updating its value, a
struct_ops would be activated automatically. Yet other BPF program
types required to make a bpf_link with their instances before they
could become active. Now, however, you can create an inactive
struct_ops, and create a link to activate it later.
With bpf_links, struct_ops has a behavior similar to other BPF program
types. You can pin/unpin them from their links and the struct_ops will
be deactivated when its link is removed while previously need someone
to delete the value for it to be deactivated.
bpf_links are responsible for registering their associated
struct_ops. You can only use a struct_ops that has the BPF_F_LINK flag
set to create a bpf_link, while a structs without this flag behaves in
the same manner as before and is registered upon updating its value.
The BPF_LINK_TYPE_STRUCT_OPS serves a dual purpose. Not only is it
used to craft the links for BPF struct_ops programs, but also to
create links for BPF struct_ops them-self. Since the links of BPF
struct_ops programs are only used to create trampolines internally,
they are never seen in other contexts. Thus, they can be reused for
struct_ops themself.
To maintain a reference to the map supporting this link, we add
bpf_struct_ops_link as an additional type. The pointer of the map is
RCU and won't be necessary until later in the patchset.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Link: https://lore.kernel.org/r/20230323032405.3735486-4-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
PARPORT_EPP_FAST flag currently uses 32-bit I/O port access for data
read/write (insl/outsl).
Add PARPORT_EPP_FAST_16 and PARPORT_EPP_FAST_8 that use insw/outsw
and insb/outsb (and PARPORT_EPP_FAST_32 as alias for PARPORT_EPP_FAST).
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Add feature bit to existing device caps field. EFA supports data polling
of 128 bytes blocks.
The flag indicates that the NIC guarentees that a 128 byte aligned block
is written in order, ie that observing the last 8 bits of the block mean
the prior 127 bytes are also written.
It is useful for "last data polling" acceleration techniques.
Link: https://lore.kernel.org/r/20230219081328.10419-1-mrgolin@amazon.com
Reviewed-by: Yehuda Yitschak <yehuday@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Acked-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently when NL80211_SCAN_FLAG_COLOCATED_6GHZ is set in the scan flags,
in addition to the co-located APs, PSC channels in the 6 GHz band would
also be scanned if the user space has asked for it. In other words, the
scan would happen on PSC channels & co-located 6 GHz channels that were
reported in the RNR IE.
Update the documentation of NL80211_SCAN_FLAG_COLOCATED_6GHZ flag to
reflect the above said behavior.
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Link: https://lore.kernel.org/r/20230308104556.9399-1-quic_mpubbise@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After a couple of years and multiple LTS releases we received a report
that the behavior of O_DIRECTORY | O_CREAT changed starting with v5.7.
On kernels prior to v5.7 combinations of O_DIRECTORY, O_CREAT, O_EXCL
had the following semantics:
(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
* d doesn't exist: create regular file
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: EISDIR
(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
* d doesn't exist: create regular file
* d exists and is a regular file: EEXIST
* d exists and is a directory: EEXIST
(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
* d doesn't exist: ENOENT
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: open directory
On kernels since to v5.7 combinations of O_DIRECTORY, O_CREAT, O_EXCL
have the following semantics:
(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
* d doesn't exist: ENOTDIR (create regular file)
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: EISDIR
(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
* d doesn't exist: ENOTDIR (create regular file)
* d exists and is a regular file: EEXIST
* d exists and is a directory: EEXIST
(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
* d doesn't exist: ENOENT
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: open directory
This is a fairly substantial semantic change that userspace didn't
notice until Pedro took the time to deliberately figure out corner
cases. Since no one noticed this breakage we can somewhat safely assume
that O_DIRECTORY | O_CREAT combinations are likely unused.
The v5.7 breakage is especially weird because while ENOTDIR is returned
indicating failure a regular file is actually created. This doesn't make
a lot of sense.
Time was spent finding potential users of this combination. Searching on
codesearch.debian.net showed that codebases often express semantical
expectations about O_DIRECTORY | O_CREAT which are completely contrary
to what our code has done and currently does.
The expectation often is that this particular combination would create
and open a directory. This suggests users who tried to use that
combination would stumble upon the counterintuitive behavior no matter
if pre-v5.7 or post v5.7 and quickly realize neither semantics give them
what they want. For some examples see the code examples in [1] to [3]
and the discussion in [4].
There are various ways to address this issue. The lazy/simple option
would be to restore the pre-v5.7 behavior and to just live with that bug
forever. But since there's a real chance that the O_DIRECTORY | O_CREAT
quirk isn't relied upon we should try to get away with murder(ing bad
semantics) first. If we need to Frankenstein pre-v5.7 behavior later so
be it.
So let's simply return EINVAL categorically for O_DIRECTORY | O_CREAT
combinations. In addition to cleaning up the old bug this also opens up
the possiblity to make that flag combination do something more intuitive
in the future.
Starting with this commit the following semantics apply:
(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
* d doesn't exist: EINVAL
* d exists and is a regular file: EINVAL
* d exists and is a directory: EINVAL
(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
* d doesn't exist: EINVAL
* d exists and is a regular file: EINVAL
* d exists and is a directory: EINVAL
(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
* d doesn't exist: ENOENT
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: open directory
One additional note, O_TMPFILE is implemented as:
#define __O_TMPFILE 020000000
#define O_TMPFILE (__O_TMPFILE | O_DIRECTORY)
#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT)
For older kernels it was important to return an explicit error when
O_TMPFILE wasn't supported. So O_TMPFILE requires that O_DIRECTORY is
raised alongside __O_TMPFILE. It also enforced that O_CREAT wasn't
specified. Since O_DIRECTORY | O_CREAT could be used to create a regular
allowing that combination together with __O_TMPFILE would've meant that
false positives were possible, i.e., that a regular file was created
instead of a O_TMPFILE. This could've been used to trick userspace into
thinking it operated on a O_TMPFILE when it wasn't.
Now that we block O_DIRECTORY | O_CREAT completely the check for O_CREAT
in the __O_TMPFILE branch via if ((flags & O_TMPFILE_MASK) != O_TMPFILE)
can be dropped. Instead we can simply check verify that O_DIRECTORY is
raised via if (!(flags & O_DIRECTORY)) and explain this in two comments.
As Aleksa pointed out O_PATH is unaffected by this change since it
always returned EINVAL if O_CREAT was specified - with or without
O_DIRECTORY.
Link: https://lore.kernel.org/lkml/20230320071442.172228-1-pedro.falcato@gmail.com
Link: https://sources.debian.org/src/flatpak/1.14.4-1/subprojects/libglnx/glnx-dirfd.c/?hl=324#L324 [1]
Link: https://sources.debian.org/src/flatpak-builder/1.2.3-1/subprojects/libglnx/glnx-shutil.c/?hl=251#L251 [2]
Link: https://sources.debian.org/src/ostree/2022.7-2/libglnx/glnx-dirfd.c/?hl=324#L324 [3]
Link: https://www.openwall.com/lists/oss-security/2014/11/26/14 [4]
Reported-by: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This tag contains habanalabs driver and accel changes for v6.4:
- uAPI changes:
- Add opcodes to the CS ioctl to allow user to stall/resume specific engines
inside Gaudi2. This is to allow the user to perform power
testing/measurements when training different topologies.
- Expose in the INFO ioctl the amount of device memory that the driver
and f/w reserve for themselves.
- Expose in the INFO ioctl a bit-mask of the available rotator engines
in Gaudi2. This is to align with other engines that are already exposed.
- Expose in the INFO ioctl the register's address of the f/w that should
be used to trigger interrupts from within the user's code running in the
compute engines.
- Add a critical-event bit in the eventfd bitmask so the user will know the
event that was received was critical, and a reset will now occur
- Expose in the INFO ioctl two new opcodes to fetch information on h/w and
f/w events. The events recorded are the events that were reported in the
eventfd.
- New features and improvements:
- Add a dedicated interrupt ID in MSI-X in the device to the notification of
an unexpected user-related event in Gaudi2. Handle it in the driver by
reporting this event.
- Allow the user to fetch the device memory current usage even when the
device is undergoing compute-reset (a reset type that only clears the
compute engines).
- Enable graceful reset mechanism for compute-reset. This will give the
user a few seconds before the device is reset. For example, the user can,
during that time, perform certain device operations (dump data for debug)
or close the device in an orderly fashion.
- Align the decoder with the rest of the engines in regard to notification
to the user about interrupts and in regard to performing graceful reset
when needed (instead of immediate reset).
- Add support for assert interrupt from the TPC engine.
- Get the reset type that is necessary to perform per event from the
auto-generated irq_map array.
- Print the specific reason why a device is still in use when notifying to
the user about it (after the user closed the device's FD).
- Move to threaded IRQ when handling interrupts of workload completions.
- Firmware related fixes:
- Fix RAZWI event handler to match newest f/w version.
- Read error cause register in dma core events because the f/w doesn't
do that.
- Increase maximum time to wait for completion of Gaudi2 reset due to f/w
bug.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
i.e increment the device file refcount for any dma-buf that was exported
for that device. This will make sure the compute device release function
won't be called until the user closes all the FDs of the relevant
dma-bufs. Without this change, closing the device's FD before/without
closing the dma-buf's FD would always lead to hard-reset of the device.
- Fix a link in the drm documentation to correctly point to the accel section.
- Compilation warnings cleanups
- Misc bug fixes and code cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmQYfcAACgkQZR1NuKta
# 54DB4Af/SuiHZkVXwr+yHPv9El726rz9ZQD7mQtzNmehWGonwAvz15yqocNMUSbF
# JbqE/vrZjvbXrP1Uv5UrlRVdnFHSPV18VnHU4BMS/WOm19SsR6vZ0QOXOoa6/AUb
# w+kF3D//DbFI4/mTGfpH5/pzwu51ti8aVktosPFlHIa8iI8CB4/4IV+ivQ8UW4oK
# HyDRkIvHdRmER7vGOfhwhsr4zdqSlJBYrv3C3Z1dkSYBPW/5ICbiM1UlKycwdYKI
# cajQBSdUQwUCWnI+i8RmSy3kjNO6OE4XRUvTv89F2bQeyK/1rJLG2m2xZR/Ml/o5
# 7Cgvbn0hWZyeqe7OObYiBlSOBSehCA==
# =wclm
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Mar 2023 01:37:36 AEST
# gpg: using RSA key ED311BA00042EF52DCB412C5651D4DB8AB5AE780
# gpg: Can't check signature: No public key
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320154026.GA766126@ogabbay-vm-u20.habana-labs.com
The GHCB specification declares that the firmware error value for
a guest request will be stored in the lower 32 bits of EXIT_INFO_2. The
upper 32 bits are for the VMM's own error code. The fw_err argument to
snp_guest_issue_request() is thus a misnomer, and callers will need
access to all 64 bits.
The type of unsigned long also causes problems, since sw_exit_info2 is
u64 (unsigned long long) vs the argument's unsigned long*. Change this
type for issuing the guest request. Pass the ioctl command struct's error
field directly instead of in a local variable, since an incomplete guest
request may not set the error code, and uninitialized stack memory would
be written back to user space.
The firmware might not even be called, so bookend the call with the no
firmware call error and clear the error.
Since the "fw_err" field is really exitinfo2 split into the upper bits'
vmm error code and lower bits' firmware error code, convert the 64 bit
value to a union.
[ bp:
- Massage commit message
- adjust code
- Fix a build issue as
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303070609.vX6wp2Af-lkp@intel.com
- print exitinfo2 in hex
Tom:
- Correct -EIO exit case. ]
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230214164638.1189804-5-dionnaglaze@google.com
Link: https://lore.kernel.org/r/20230307192449.24732-12-bp@alien8.de
Add logic for setting up and tearing down chained DMA connections.
Since pipelines are not used, all the logic to set the pipeline states
can be bypassed, with only the DMA programming sequences remaining. In
addition the same format needs to be used for host- and link-DMA,
without the usual fixup to use the S32_LE format on the link.
Note however that for convenience and compatibility with existing
definitions, the topology relies on the concept of pipelines with a
'USE_CHAIN_DMA' token indicating that all the logic shall be bypassed.
Unlike 'normal' ALSA sequences, the chain DMA is not programmed in
hw_params/hw_free. The IPC message to set-up and tear-down chained DMA
are sent in sof_ipc4_trigger_pipelines(), but the contents prepared
earlier.
Chained DMA is only supported by the Intel HDA DAI for now, and only
S16_LE and S32_LE formats are supported for now.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321092654.7292-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.
Address the following warning found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
drivers/gpu/drm/i915/gem/i915_gem_context.c: In function ‘set_proto_ctx_engines.isra’:
drivers/gpu/drm/i915/gem/i915_gem_context.c:769:41: warning: array subscript n is outside array bounds of ‘struct i915_engine_class_instance[0]’ [-Warray-bounds=]
769 | if (copy_from_user(&ci, &user->engines[n], sizeof(ci))) {
| ^~~~~~~~~~~~~~~~~
./include/uapi/drm/i915_drm.h:2494:43: note: while referencing ‘engines’
2494 | struct i915_engine_class_instance engines[0];
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/271
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZBSu2QsUJy31kjSE@work
All engine masks are exposed to user, make sure user gets the
correct rotator enabled mask in gaudi2.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We expose this in order for user applications to know how much dram
is reserved for internal use.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We need the mainline fixes in this branch for testing and other
subsystem changes to be based properly on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These two capabilities are no longer supported, so no
longer define them when compiling the kernel.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi and ipsec.
A little more changes than usual, but it's pretty normal for us that
the rc3/rc4 PRs are oversized as people start testing in earnest.
Possibly an extra boost from people deploying the 6.1 LTS but that's
more of an unscientific hunch.
Current release - regressions:
- phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()
- virtio: vsock: don't use skbuff state to account credit
- virtio: vsock: don't drop skbuff on copy failure
- virtio_net: fix page_to_skb() miscalculating the memory size
Current release - new code bugs:
- eth: correct xdp_features after device reconfig
- wifi: nl80211: fix the puncturing bitmap policy
- net/mlx5e: flower:
- fix raw counter initialization
- fix missing error code
- fix cloned flow attribute
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context, don't
assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype
change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action"
* tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
selftests: bonding: add tests for ether type changes
bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
net: renesas: rswitch: Fix GWTSDIE register handling
net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
ethernet: sun: add check for the mdesc_grab()
net: ipa: fix some register validity checks
net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
net: ipa: add two missing declarations
net: ipa: reg: include <linux/bug.h>
net: xdp: don't call notifiers during driver init
net/sched: act_api: add specific EXT_WARN_MSG for tc action
Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
ynl: make the tooling check the license
ynl: broaden the license even more
tools: ynl: make definitions optional again
hsr: ratelimit only when errors are printed
qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
selftests: net: devlink_port_split.py: skip test if no suitable device available
...
Implement MDB control path support, enabling the creation, deletion,
replacement and dumping of MDB entries in a similar fashion to the
bridge driver. Unlike the bridge driver, each entry stores a list of
remote VTEPs to which matched packets need to be replicated to and not a
list of bridge ports.
The motivating use case is the installation of MDB entries by a user
space control plane in response to received EVPN routes. As such, only
allow permanent MDB entries to be installed and do not implement
snooping functionality, avoiding a lot of unnecessary complexity.
Since entries can only be modified by user space under RTNL, use RTNL as
the write lock. Use RCU to ensure that MDB entries and remotes are not
freed while being accessed from the data path during transmission.
In terms of uAPI, reuse the existing MDB netlink interface, but add a
few new attributes to request and response messages:
* IP address of the destination VXLAN tunnel endpoint where the
multicast receivers reside.
* UDP destination port number to use to connect to the remote VXLAN
tunnel endpoint.
* VXLAN VNI Network Identifier to use to connect to the remote VXLAN
tunnel endpoint. Required when Ingress Replication (IR) is used and
the remote VTEP is not a member of originating broadcast domain
(VLAN/VNI) [1].
* Source VNI Network Identifier the MDB entry belongs to. Used only when
the VXLAN device is in external mode.
* Interface index of the outgoing interface to reach the remote VXLAN
tunnel endpoint. This is required when the underlay destination IP is
multicast (P2MP), as the multicast routing tables are not consulted.
All the new attributes are added under the 'MDBA_SET_ENTRY_ATTRS' nest
which is strictly validated by the bridge driver, thereby automatically
rejecting the new attributes.
[1] https://datatracker.ietf.org/doc/html/draft-ietf-bess-evpn-irb-mcast#section-3.2.2
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In my previous commit 0349b8779c ("sched: add new attr TCA_EXT_WARN_MSG
to report tc extact message") I didn't notice the tc action use different
enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action.
Let's add a TCA_ROOT_EXT_WARN_MSG for tc action specifically and put this
param before going to the TCA_ACT_TAB nest.
Fixes: 0349b8779c ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I relicensed Netlink spec code to GPL-2.0 OR BSD-3-Clause but
we still put a slightly different license on the uAPI header
than the rest of the code. Use the Linux-syscall-note on all
the specs and all generated code. It's moot for kernel code,
but should not hurt. This way the licenses match everywhere.
Cc: Chuck Lever <chuck.lever@oracle.com>
Fixes: 37d9df224d ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
