Instead of performing unconditional system-wide bpf_capable() and
perfmon_capable() calls inside bpf_base_func_proto() function (and other
similar ones) to determine eligibility of a given BPF helper for a given
program, use previously recorded BPF token during BPF_PROG_LOAD command
handling to inform the decision.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-8-andrii@kernel.org
Add basic support of BPF token to BPF_PROG_LOAD. BPF_F_TOKEN_FD flag
should be set in prog_flags field when providing prog_token_fd.
Wire through a set of allowed BPF program types and attach types,
derived from BPF FS at BPF token creation time. Then make sure we
perform bpf_token_capable() checks everywhere where it's relevant.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-7-andrii@kernel.org
Accept BPF token FD in BPF_BTF_LOAD command to allow BTF data loading
through delegated BPF token. BPF_F_TOKEN_FD flag has to be specified
when passing BPF token FD. Given BPF_BTF_LOAD command didn't have flags
field before, we also add btf_flags field.
BTF loading is a pretty straightforward operation, so as long as BPF
token is created with allow_cmds granting BPF_BTF_LOAD command, kernel
proceeds to parsing BTF data and creating BTF object.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-6-andrii@kernel.org
Allow providing token_fd for BPF_MAP_CREATE command to allow controlled
BPF map creation from unprivileged process through delegated BPF token.
New BPF_F_TOKEN_FD flag is added to specify together with BPF token FD
for BPF_MAP_CREATE command.
Wire through a set of allowed BPF map types to BPF token, derived from
BPF FS at BPF token creation time. This, in combination with allowed_cmds
allows to create a narrowly-focused BPF token (controlled by privileged
agent) with a restrictive set of BPF maps that application can attempt
to create.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-5-andrii@kernel.org
Add new kind of BPF kernel object, BPF token. BPF token is meant to
allow delegating privileged BPF functionality, like loading a BPF
program or creating a BPF map, from privileged process to a *trusted*
unprivileged process, all while having a good amount of control over which
privileged operations could be performed using provided BPF token.
This is achieved through mounting BPF FS instance with extra delegation
mount options, which determine what operations are delegatable, and also
constraining it to the owning user namespace (as mentioned in the
previous patch).
BPF token itself is just a derivative from BPF FS and can be created
through a new bpf() syscall command, BPF_TOKEN_CREATE, which accepts BPF
FS FD, which can be attained through open() API by opening BPF FS mount
point. Currently, BPF token "inherits" delegated command, map types,
prog type, and attach type bit sets from BPF FS as is. In the future,
having an BPF token as a separate object with its own FD, we can allow
to further restrict BPF token's allowable set of things either at the
creation time or after the fact, allowing the process to guard itself
further from unintentionally trying to load undesired kind of BPF
programs. But for now we keep things simple and just copy bit sets as is.
When BPF token is created from BPF FS mount, we take reference to the
BPF super block's owning user namespace, and then use that namespace for
checking all the {CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN, CAP_SYS_ADMIN}
capabilities that are normally only checked against init userns (using
capable()), but now we check them using ns_capable() instead (if BPF
token is provided). See bpf_token_capable() for details.
Such setup means that BPF token in itself is not sufficient to grant BPF
functionality. User namespaced process has to *also* have necessary
combination of capabilities inside that user namespace. So while
previously CAP_BPF was useless when granted within user namespace, now
it gains a meaning and allows container managers and sys admins to have
a flexible control over which processes can and need to use BPF
functionality within the user namespace (i.e., container in practice).
And BPF FS delegation mount options and derived BPF tokens serve as
a per-container "flag" to grant overall ability to use bpf() (plus further
restrict on which parts of bpf() syscalls are treated as namespaced).
Note also, BPF_TOKEN_CREATE command itself requires ns_capable(CAP_BPF)
within the BPF FS owning user namespace, rounding up the ns_capable()
story of BPF token. Also creating BPF token in init user namespace is
currently not supported, given BPF token doesn't have any effect in init
user namespace anyways.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-4-andrii@kernel.org
Add few new mount options to BPF FS that allow to specify that a given
BPF FS instance allows creation of BPF token (added in the next patch),
and what sort of operations are allowed under BPF token. As such, we get
4 new mount options, each is a bit mask
- `delegate_cmds` allow to specify which bpf() syscall commands are
allowed with BPF token derived from this BPF FS instance;
- if BPF_MAP_CREATE command is allowed, `delegate_maps` specifies
a set of allowable BPF map types that could be created with BPF token;
- if BPF_PROG_LOAD command is allowed, `delegate_progs` specifies
a set of allowable BPF program types that could be loaded with BPF token;
- if BPF_PROG_LOAD command is allowed, `delegate_attachs` specifies
a set of allowable BPF program attach types that could be loaded with
BPF token; delegate_progs and delegate_attachs are meant to be used
together, as full BPF program type is, in general, determined
through both program type and program attach type.
Currently, these mount options accept the following forms of values:
- a special value "any", that enables all possible values of a given
bit set;
- numeric value (decimal or hexadecimal, determined by kernel
automatically) that specifies a bit mask value directly;
- all the values for a given mount option are combined, if specified
multiple times. E.g., `mount -t bpf nodev /path/to/mount -o
delegate_maps=0x1 -o delegate_maps=0x2` will result in a combined 0x3
mask.
Ideally, more convenient (for humans) symbolic form derived from
corresponding UAPI enums would be accepted (e.g., `-o
delegate_progs=kprobe|tracepoint`) and I intend to implement this, but
it requires a bunch of UAPI header churn, so I postponed it until this
feature lands upstream or at least there is a definite consensus that
this feature is acceptable and is going to make it, just to minimize
amount of wasted effort and not increase amount of non-essential code to
be reviewed.
Attentive reader will notice that BPF FS is now marked as
FS_USERNS_MOUNT, which theoretically makes it mountable inside non-init
user namespace as long as the process has sufficient *namespaced*
capabilities within that user namespace. But in reality we still
restrict BPF FS to be mountable only by processes with CAP_SYS_ADMIN *in
init userns* (extra check in bpf_fill_super()). FS_USERNS_MOUNT is added
to allow creating BPF FS context object (i.e., fsopen("bpf")) from
inside unprivileged process inside non-init userns, to capture that
userns as the owning userns. It will still be required to pass this
context object back to privileged process to instantiate and mount it.
This manipulation is important, because capturing non-init userns as the
owning userns of BPF FS instance (super block) allows to use that userns
to constraint BPF token to that userns later on (see next patch). So
creating BPF FS with delegation inside unprivileged userns will restrict
derived BPF token objects to only "work" inside that intended userns,
making it scoped to a intended "container". Also, setting these
delegation options requires capable(CAP_SYS_ADMIN), so unprivileged
process cannot set this up without involvement of a privileged process.
There is a set of selftests at the end of the patch set that simulates
this sequence of steps and validates that everything works as intended.
But careful review is requested to make sure there are no missed gaps in
the implementation and testing.
This somewhat subtle set of aspects is the result of previous
discussions ([0]) about various user namespace implications and
interactions with BPF token functionality and is necessary to contain
BPF token inside intended user namespace.
[0] https://lore.kernel.org/bpf/20230704-hochverdient-lehne-eeb9eeef785e@brauner/
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-3-andrii@kernel.org
Within BPF syscall handling code CAP_NET_ADMIN checks stand out a bit
compared to CAP_BPF and CAP_PERFMON checks. For the latter, CAP_BPF or
CAP_PERFMON are checked first, but if they are not set, CAP_SYS_ADMIN
takes over and grants whatever part of BPF syscall is required.
Similar kind of checks that involve CAP_NET_ADMIN are not so consistent.
One out of four uses does follow CAP_BPF/CAP_PERFMON model: during
BPF_PROG_LOAD, if the type of BPF program is "network-related" either
CAP_NET_ADMIN or CAP_SYS_ADMIN is required to proceed.
But in three other cases CAP_NET_ADMIN is required even if CAP_SYS_ADMIN
is set:
- when creating DEVMAP/XDKMAP/CPU_MAP maps;
- when attaching CGROUP_SKB programs;
- when handling BPF_PROG_QUERY command.
This patch is changing the latter three cases to follow BPF_PROG_LOAD
model, that is allowing to proceed under either CAP_NET_ADMIN or
CAP_SYS_ADMIN.
This also makes it cleaner in subsequent BPF token patches to switch
wholesomely to a generic bpf_token_capable(int cap) check, that always
falls back to CAP_SYS_ADMIN if requested capability is missing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-2-andrii@kernel.org
When the CPU goes idle for the last time during the CPU down hotplug
process, RCU reports a final quiescent state for the current CPU. If
this quiescent state propagates up to the top, some tasks may then be
woken up to complete the grace period: the main grace period kthread
and/or the expedited main workqueue (or kworker).
If those kthreads have a SCHED_FIFO policy, the wake up can indirectly
arm the RT bandwith timer to the local offline CPU. Since this happens
after hrtimers have been migrated at CPUHP_AP_HRTIMERS_DYING stage, the
timer gets ignored. Therefore if the RCU kthreads are waiting for RT
bandwidth to be available, they may never be actually scheduled.
This triggers TREE03 rcutorture hangs:
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 4-...!: (1 GPs behind) idle=9874/1/0x4000000000000000 softirq=0/0 fqs=20 rcuc=21071 jiffies(starved)
rcu: (t=21035 jiffies g=938281 q=40787 ncpus=6)
rcu: rcu_preempt kthread starved for 20964 jiffies! g938281 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:R running task stack:14896 pid:14 tgid:14 ppid:2 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x2eb/0xa80
schedule+0x1f/0x90
schedule_timeout+0x163/0x270
? __pfx_process_timeout+0x10/0x10
rcu_gp_fqs_loop+0x37c/0x5b0
? __pfx_rcu_gp_kthread+0x10/0x10
rcu_gp_kthread+0x17c/0x200
kthread+0xde/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2b/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
The situation can't be solved with just unpinning the timer. The hrtimer
infrastructure and the nohz heuristics involved in finding the best
remote target for an unpinned timer would then also need to handle
enqueues from an offline CPU in the most horrendous way.
So fix this on the RCU side instead and defer the wake up to an online
CPU if it's too late for the local one.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Fixes: 5c0930ccaa ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
To ensure that a module remains accessible whenever a struct_ops object of
a struct_ops type provided by the module is still in use.
struct bpf_struct_ops_map doesn't hold a refcnt to btf anymore since a
module will hold a refcnt to it's btf already. But, struct_ops programs are
different. They hold their associated btf, not the module since they need
only btf to assure their types (signatures).
However, verifier holds the refcnt of the associated module of a struct_ops
type temporarily when verify a struct_ops prog. Verifier needs the help
from the verifier operators (struct bpf_verifier_ops) provided by the owner
module to verify data access of a prog, provide information, and generate
code.
This patch also add a count of links (links_cnt) to bpf_struct_ops_map. It
avoids bpf_struct_ops_map_put_progs() from accessing btf after calling
module_put() in bpf_struct_ops_map_free().
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-10-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Pass the fd of a btf from the userspace to the bpf() syscall, and then
convert the fd into a btf. The btf is generated from the module that
defines the target BPF struct_ops type.
In order to inform the kernel about the module that defines the target
struct_ops type, the userspace program needs to provide a btf fd for the
respective module's btf. This btf contains essential information on the
types defined within the module, including the target struct_ops type.
A btf fd must be provided to the kernel for struct_ops maps and for the bpf
programs attached to those maps.
In the case of the bpf programs, the attach_btf_obj_fd parameter is passed
as part of the bpf_attr and is converted into a btf. This btf is then
stored in the prog->aux->attach_btf field. Here, it just let the verifier
access attach_btf directly.
In the case of struct_ops maps, a btf fd is passed as value_type_btf_obj_fd
of bpf_attr. The bpf_struct_ops_map_alloc() function converts the fd to a
btf and stores it as st_map->btf. A flag BPF_F_VTYPE_BTF_OBJ_FD is added
for map_flags to indicate that the value of value_type_btf_obj_fd is set.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-9-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This is a preparation for searching for struct_ops types from a specified
module. BTF is always btf_vmlinux now. This patch passes a pointer of BTF
to bpf_struct_ops_find_value() and bpf_struct_ops_find(). Once the new
registration API of struct_ops types is used, other BTFs besides
btf_vmlinux can also be passed to them.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-8-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Include btf object id (btf_obj_id) in bpf_map_info so that tools (ex:
bpftools struct_ops dump) know the correct btf from the kernel to look up
type information of struct_ops types.
Since struct_ops types can be defined and registered in a module. The
type information of a struct_ops type are defined in the btf of the
module defining it. The userspace tools need to know which btf is for
the module defining a struct_ops type.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-7-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Maintain a registry of registered struct_ops types in the per-btf (module)
struct_ops_tab. This registry allows for easy lookup of struct_ops types
that are registered by a specific module.
It is a preparation work for supporting kernel module struct_ops in a
latter patch. Each struct_ops will be registered under its own kernel
module btf and will be stored in the newly added btf->struct_ops_tab. The
bpf verifier and bpf syscall (e.g. prog and map cmd) can find the
struct_ops and its btf type/size/id... information from
btf->struct_ops_tab.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-5-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
At the moment we don't store cookie for perf_event probes,
while we do that for the rest of the probes.
Adding cookie fields to struct bpf_link_info perf event
probe records:
perf_event.uprobe
perf_event.kprobe
perf_event.tracepoint
perf_event.perf_event
And the code to store that in bpf_link_info struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20240119110505.400573-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current checking rules are structured to disallow alu on particular ptr
types explicitly, so default cases are allowed implicitly. This may lead
to newly added ptr types being allowed unexpectedly. So restruture it to
allow alu explicitly. The tradeoff is mainly a bit more cases added in
the switch. The following table from Eduard summarizes the rules:
| Pointer type | Arithmetics allowed |
|---------------------+---------------------|
| PTR_TO_CTX | yes |
| CONST_PTR_TO_MAP | conditionally |
| PTR_TO_MAP_VALUE | yes |
| PTR_TO_MAP_KEY | yes |
| PTR_TO_STACK | yes |
| PTR_TO_PACKET_META | yes |
| PTR_TO_PACKET | yes |
| PTR_TO_PACKET_END | no |
| PTR_TO_FLOW_KEYS | conditionally |
| PTR_TO_SOCKET | no |
| PTR_TO_SOCK_COMMON | no |
| PTR_TO_TCP_SOCK | no |
| PTR_TO_TP_BUFFER | yes |
| PTR_TO_XDP_SOCK | no |
| PTR_TO_BTF_ID | yes |
| PTR_TO_MEM | yes |
| PTR_TO_BUF | yes |
| PTR_TO_FUNC | yes |
| CONST_PTR_TO_DYNPTR | yes |
The refactored rules are equivalent to the original one. Note that
PTR_TO_FUNC and CONST_PTR_TO_DYNPTR are not reject here because: (1)
check_mem_access() rejects load/store on those ptrs, and those ptrs
with offset passing to calls are rejected check_func_arg_reg_off();
(2) someone may rely on the verifier not rejecting programs earily.
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240117094012.36798-1-sunhao.th@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With patch set [1], precision backtracing supports register spill/fill
to/from the stack. The patch [2] allows initial imprecise register spill
with content 0. This is a common case for cpuv3 and lower for
initializing the stack variables with pattern
r1 = 0
*(u64 *)(r10 - 8) = r1
and the [2] has demonstrated good verification improvement.
For cpuv4, the initialization could be
*(u64 *)(r10 - 8) = 0
The current verifier marks the r10-8 contents with STACK_ZERO.
Similar to [2], let us permit the above insn to behave like
imprecise register spill which can reduce number of verified states.
The change is in function check_stack_write_fixed_off().
Before this patch, spilled zero will be marked as STACK_ZERO
which can provide precise values. In check_stack_write_var_off(),
STACK_ZERO will be maintained if writing a const zero
so later it can provide precise values if needed.
The above handling of '*(u64 *)(r10 - 8) = 0' as a spill
will have issues in check_stack_write_var_off() as the spill
will be converted to STACK_MISC and the precise value 0
is lost. To fix this issue, if the spill slots with const
zero and the BPF_ST write also with const zero, the spill slots
are preserved, which can later provide precise values
if needed. Without the change in check_stack_write_var_off(),
the test_verifier subtest 'BPF_ST_MEM stack imm zero, variable offset'
will fail.
I checked cpuv3 and cpuv4 with and without this patch with veristat.
There is no state change for cpuv3 since '*(u64 *)(r10 - 8) = 0'
is only generated with cpuv4.
For cpuv4:
$ ../veristat -C old.cpuv4.csv new.cpuv4.csv -e file,prog,insns,states -f 'insns_diff!=0'
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
------------------------------------------ ------------------- --------- --------- --------------- ---------- ---------- -------------
local_storage_bench.bpf.linked3.o get_local 228 168 -60 (-26.32%) 17 14 -3 (-17.65%)
pyperf600_bpf_loop.bpf.linked3.o on_event 6066 4889 -1177 (-19.40%) 403 321 -82 (-20.35%)
test_cls_redirect.bpf.linked3.o cls_redirect 35483 35387 -96 (-0.27%) 2179 2177 -2 (-0.09%)
test_l4lb_noinline.bpf.linked3.o balancer_ingress 4494 4522 +28 (+0.62%) 217 219 +2 (+0.92%)
test_l4lb_noinline_dynptr.bpf.linked3.o balancer_ingress 1432 1455 +23 (+1.61%) 92 94 +2 (+2.17%)
test_xdp_noinline.bpf.linked3.o balancer_ingress_v6 3462 3458 -4 (-0.12%) 216 216 +0 (+0.00%)
verifier_iterating_callbacks.bpf.linked3.o widening 52 41 -11 (-21.15%) 4 3 -1 (-25.00%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 12412 11719 -693 (-5.58%) 345 330 -15 (-4.35%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 12478 11794 -684 (-5.48%) 346 331 -15 (-4.34%)
test_l4lb_noinline and test_l4lb_noinline_dynptr has minor regression, but
pyperf600_bpf_loop and local_storage_bench gets pretty good improvement.
[1] https://lore.kernel.org/all/20231205184248.1502704-1-andrii@kernel.org/
[2] https://lore.kernel.org/all/20231205184248.1502704-9-andrii@kernel.org/
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240110051348.2737007-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, when a scalar bounded register is spilled to the stack, its
ID is preserved, but only if was already assigned, i.e. if this register
was MOVed before.
Assign an ID on spill if none is set, so that equal scalars could be
tracked if a register is spilled to the stack and filled into another
register.
One test is adjusted to reflect the change in register IDs.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-9-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current infinite loops detection mechanism is speculative:
- first, states_maybe_looping() check is done which simply does memcmp
for R1-R10 in current frame;
- second, states_equal(..., exact=false) is called. With exact=false
states_equal() would compare scalars for equality only if in old
state scalar has precision mark.
Such logic might be problematic if compiler makes some unlucky stack
spill/fill decisions. An artificial example of a false positive looks
as follows:
r0 = ... unknown scalar ...
r0 &= 0xff;
*(u64 *)(r10 - 8) = r0;
r0 = 0;
loop:
r0 = *(u64 *)(r10 - 8);
if r0 > 10 goto exit_;
r0 += 1;
*(u64 *)(r10 - 8) = r0;
r0 = 0;
goto loop;
This commit updates call to states_equal to use exact=true, forcing
all scalar comparisons to be exact.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-3-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add ability to iterate multiple decl_tag types pointed to the same
function argument. Use this to support multiple __arg_xxx tags per
global subprog argument.
We leave btf_find_decl_tag_value() intact, but change its implementation
to use a new btf_find_next_decl_tag() which can be straightforwardly
used to find next BTF type ID of a matching btf_decl_tag type.
btf_prepare_func_args() is switched from btf_find_decl_tag_value() to
btf_find_next_decl_tag() to gain multiple tags per argument support.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240105000909.2818934-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move scalar arg processing in btf_prepare_func_args() after all pointer
arg processing is done. This makes it easier to do validation. One
example of unintended behavior right now is ability to specify
__arg_nonnull for integer/enum arguments. This patch fixes this.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240105000909.2818934-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The motivation of inlining bpf_kptr_xchg() comes from the performance
profiling of bpf memory allocator benchmark. The benchmark uses
bpf_kptr_xchg() to stash the allocated objects and to pop the stashed
objects for free. After inling bpf_kptr_xchg(), the performance for
object free on 8-CPUs VM increases about 2%~10%. The inline also has
downside: both the kasan and kcsan checks on the pointer will be
unavailable.
bpf_kptr_xchg() can be inlined by converting the calling of
bpf_kptr_xchg() into an atomic_xchg() instruction. But the conversion
depends on two conditions:
1) JIT backend supports atomic_xchg() on pointer-sized word
2) For the specific arch, the implementation of xchg is the same as
atomic_xchg() on pointer-sized words.
It seems most 64-bit JIT backends satisfies these two conditions. But
as a precaution, defining a weak function bpf_jit_supports_ptr_xchg()
to state whether such conversion is safe and only supporting inline for
64-bit host.
For x86-64, it supports BPF_XCHG atomic operation and both xchg() and
atomic_xchg() use arch_xchg() to implement the exchange, so enabling the
inline of bpf_kptr_xchg() on x86-64 first.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240105104819.3916743-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Running the following two commands in parallel on a multi-processor
AArch64 machine can sporadically produce an unexpected warning about
duplicate histogram entries:
$ while true; do
echo hist:key=id.syscall:val=hitcount > \
/sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger
cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist
sleep 0.001
done
$ stress-ng --sysbadaddr $(nproc)
The warning looks as follows:
[ 2911.172474] ------------[ cut here ]------------
[ 2911.173111] Duplicates detected: 1
[ 2911.173574] WARNING: CPU: 2 PID: 12247 at kernel/trace/tracing_map.c:983 tracing_map_sort_entries+0x3e0/0x408
[ 2911.174702] Modules linked in: iscsi_ibft(E) iscsi_boot_sysfs(E) rfkill(E) af_packet(E) nls_iso8859_1(E) nls_cp437(E) vfat(E) fat(E) ena(E) tiny_power_button(E) qemu_fw_cfg(E) button(E) fuse(E) efi_pstore(E) ip_tables(E) x_tables(E) xfs(E) libcrc32c(E) aes_ce_blk(E) aes_ce_cipher(E) crct10dif_ce(E) polyval_ce(E) polyval_generic(E) ghash_ce(E) gf128mul(E) sm4_ce_gcm(E) sm4_ce_ccm(E) sm4_ce(E) sm4_ce_cipher(E) sm4(E) sm3_ce(E) sm3(E) sha3_ce(E) sha512_ce(E) sha512_arm64(E) sha2_ce(E) sha256_arm64(E) nvme(E) sha1_ce(E) nvme_core(E) nvme_auth(E) t10_pi(E) sg(E) scsi_mod(E) scsi_common(E) efivarfs(E)
[ 2911.174738] Unloaded tainted modules: cppc_cpufreq(E):1
[ 2911.180985] CPU: 2 PID: 12247 Comm: cat Kdump: loaded Tainted: G E 6.7.0-default #2 1b58bbb22c97e4399dc09f92d309344f69c44a01
[ 2911.182398] Hardware name: Amazon EC2 c7g.8xlarge/, BIOS 1.0 11/1/2018
[ 2911.183208] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 2911.184038] pc : tracing_map_sort_entries+0x3e0/0x408
[ 2911.184667] lr : tracing_map_sort_entries+0x3e0/0x408
[ 2911.185310] sp : ffff8000a1513900
[ 2911.185750] x29: ffff8000a1513900 x28: ffff0003f272fe80 x27: 0000000000000001
[ 2911.186600] x26: ffff0003f272fe80 x25: 0000000000000030 x24: 0000000000000008
[ 2911.187458] x23: ffff0003c5788000 x22: ffff0003c16710c8 x21: ffff80008017f180
[ 2911.188310] x20: ffff80008017f000 x19: ffff80008017f180 x18: ffffffffffffffff
[ 2911.189160] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000a15134b8
[ 2911.190015] x14: 0000000000000000 x13: 205d373432323154 x12: 5b5d313131333731
[ 2911.190844] x11: 00000000fffeffff x10: 00000000fffeffff x9 : ffffd1b78274a13c
[ 2911.191716] x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 000000000057ffa8
[ 2911.192554] x5 : ffff0012f6c24ec0 x4 : 0000000000000000 x3 : ffff2e5b72b5d000
[ 2911.193404] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0003ff254480
[ 2911.194259] Call trace:
[ 2911.194626] tracing_map_sort_entries+0x3e0/0x408
[ 2911.195220] hist_show+0x124/0x800
[ 2911.195692] seq_read_iter+0x1d4/0x4e8
[ 2911.196193] seq_read+0xe8/0x138
[ 2911.196638] vfs_read+0xc8/0x300
[ 2911.197078] ksys_read+0x70/0x108
[ 2911.197534] __arm64_sys_read+0x24/0x38
[ 2911.198046] invoke_syscall+0x78/0x108
[ 2911.198553] el0_svc_common.constprop.0+0xd0/0xf8
[ 2911.199157] do_el0_svc+0x28/0x40
[ 2911.199613] el0_svc+0x40/0x178
[ 2911.200048] el0t_64_sync_handler+0x13c/0x158
[ 2911.200621] el0t_64_sync+0x1a8/0x1b0
[ 2911.201115] ---[ end trace 0000000000000000 ]---
The problem appears to be caused by CPU reordering of writes issued from
__tracing_map_insert().
The check for the presence of an element with a given key in this
function is:
val = READ_ONCE(entry->val);
if (val && keys_match(key, val->key, map->key_size)) ...
The write of a new entry is:
elt = get_free_elt(map);
memcpy(elt->key, key, map->key_size);
entry->val = elt;
The "memcpy(elt->key, key, map->key_size);" and "entry->val = elt;"
stores may become visible in the reversed order on another CPU. This
second CPU might then incorrectly determine that a new key doesn't match
an already present val->key and subsequently insert a new element,
resulting in a duplicate.
Fix the problem by adding a write barrier between
"memcpy(elt->key, key, map->key_size);" and "entry->val = elt;", and for
good measure, also use WRITE_ONCE(entry->val, elt) for publishing the
element. The sequence pairs with the mentioned "READ_ONCE(entry->val);"
and the "val->key" check which has an address dependency.
The barrier is placed on a path executed when adding an element for
a new key. Subsequent updates targeting the same key remain unaffected.
From the user's perspective, the issue was introduced by commit
c193707dde ("tracing: Remove code which merges duplicates"), which
followed commit cbf4100efb ("tracing: Add support to detect and avoid
duplicates"). The previous code operated differently; it inherently
expected potential races which result in duplicates but merged them
later when they occurred.
Link: https://lore.kernel.org/linux-trace-kernel/20240122150928.27725-1-petr.pavlu@suse.com
Fixes: c193707dde ("tracing: Remove code which merges duplicates")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
When offlining and onlining CPUs the overall reported idle and iowait
times as reported by /proc/stat jump backward and forward:
cpu 132 0 176 225249 47 6 6 21 0 0
cpu0 80 0 115 112575 33 3 4 18 0 0
cpu1 52 0 60 112673 13 3 1 2 0 0
cpu 133 0 177 226681 47 6 6 21 0 0
cpu0 80 0 116 113387 33 3 4 18 0 0
cpu 133 0 178 114431 33 6 6 21 0 0 <---- jump backward
cpu0 80 0 116 114247 33 3 4 18 0 0
cpu1 52 0 61 183 0 3 1 2 0 0 <---- idle + iowait start with 0
cpu 133 0 178 228956 47 6 6 21 0 0 <---- jump forward
cpu0 81 0 117 114929 33 3 4 18 0 0
Reason for this is that get_idle_time() in fs/proc/stat.c has different
sources for both values depending on if a CPU is online or offline:
- if a CPU is online the values may be taken from its per cpu
tick_cpu_sched structure
- if a CPU is offline the values are taken from its per cpu cpustat
structure
The problem is that the per cpu tick_cpu_sched structure is set to zero on
CPU offline. See tick_cancel_sched_timer() in kernel/time/tick-sched.c.
Therefore when a CPU is brought offline and online afterwards both its idle
and iowait sleeptime will be zero, causing a jump backward in total system
idle and iowait sleeptime. In a similar way if a CPU is then brought
offline again the total idle and iowait sleeptimes will jump forward.
It looks like this behavior was introduced with commit 4b0c0f294f
("tick: Cleanup NOHZ per cpu data on cpu down").
This was only noticed now on s390, since we switched to generic idle time
reporting with commit be76ea6144 ("s390/idle: remove arch_cpu_idle_time()
and corresponding code").
Fix this by preserving the values of idle_sleeptime and iowait_sleeptime
members of the per-cpu tick_sched structure on CPU hotplug.
Fixes: 4b0c0f294f ("tick: Cleanup NOHZ per cpu data on cpu down")
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240115163555.1004144-1-hca@linux.ibm.com
Jiri Slaby reported a futex state inconsistency resulting in -EINVAL during
a lock operation for a PI futex. It requires that the a lock process is
interrupted by a timeout or signal:
T1 Owns the futex in user space.
T2 Tries to acquire the futex in kernel (futex_lock_pi()). Allocates a
pi_state and attaches itself to it.
T2 Times out and removes its rt_waiter from the rt_mutex. Drops the
rtmutex lock and tries to acquire the hash bucket lock to remove
the futex_q. The lock is contended and T2 schedules out.
T1 Unlocks the futex (futex_unlock_pi()). Finds a futex_q but no
rt_waiter. Unlocks the futex (do_uncontended) and makes it available
to user space.
T3 Acquires the futex in user space.
T4 Tries to acquire the futex in kernel (futex_lock_pi()). Finds the
existing futex_q of T2 and tries to attach itself to the existing
pi_state. This (attach_to_pi_state()) fails with -EINVAL because uval
contains the TID of T3 but pi_state points to T1.
It's incorrect to unlock the futex and make it available for user space to
acquire as long as there is still an existing state attached to it in the
kernel.
T1 cannot hand over the futex to T2 because T2 already gave up and started
to clean up and is blocked on the hash bucket lock, so T2's futex_q with
the pi_state pointing to T1 is still queued.
T2 observes the futex_q, but ignores it as there is no waiter on the
corresponding rt_mutex and takes the uncontended path which allows the
subsequent caller of futex_lock_pi() (T4) to observe that stale state.
To prevent this the unlock path must dequeue all futex_q entries which
point to the same pi_state when there is no waiter on the rt mutex. This
requires obviously to make the dequeue conditional in the locking path to
prevent a double dequeue. With that it's guaranteed that user space cannot
observe an uncontended futex which has kernel state attached.
Fixes: fbeb558b0d ("futex/pi: Fix recursive rt_mutex waiter state")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240118115451.0TkD_ZhB@linutronix.de
Closes: https://lore.kernel.org/all/4611bcf2-44d0-4c34-9b84-17406f881003@kernel.org
Pull kgdb update from Daniel Thompson:
"The entire changeset for kgdb this cycle is a single two-line change
to remove some deadcode that, had it not been dead, would have called
strncpy() in an unsafe manner.
To be fair there were other modest clean ups were discussed this cycle
but they are not finalized and will have to wait until next time"
* tag 'kgdb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Fix a potential buffer overflow in kdb_local()
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Previous releases - regressions:
- Revert "net: rtnetlink: Enslave device before bringing it up",
breaks the case inverse to the one it was trying to fix
- net: dsa: fix oob access in DSA's netdevice event handler
dereference netdev_priv() before check its a DSA port
- sched: track device in tcf_block_get/put_ext() only for clsact
binder types
- net: tls, fix WARNING in __sk_msg_free when record becomes full
during splice and MORE hint set
- sfp-bus: fix SFP mode detect from bitrate
- drv: stmmac: prevent DSA tags from breaking COE
Previous releases - always broken:
- bpf: fix no forward progress in in bpf_iter_udp if output buffer is
too small
- bpf: reject variable offset alu on registers with a type of
PTR_TO_FLOW_KEYS to prevent oob access
- netfilter: tighten input validation
- net: add more sanity check in virtio_net_hdr_to_skb()
- rxrpc: fix use of Don't Fragment flag on RESPONSE packets, avoid
infinite loop
- amt: do not use the portion of skb->cb area which may get clobbered
- mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
i40e: Include types.h to some headers
ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work
selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes
selftests: mlxsw: qos_pfc: Remove wrong description
mlxsw: spectrum_router: Register netdevice notifier before nexthop
mlxsw: spectrum_acl_tcam: Fix stack corruption
mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path
mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure
ethtool: netlink: Add missing ethnl_ops_begin/complete
selftests: bonding: Add more missing config options
selftests: netdevsim: add a config file
libbpf: warn on unexpected __arg_ctx type when rewriting BTF
selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
bpf: enforce types for __arg_ctx-tagged arguments in global subprogs
bpf: extract bpf_ctx_convert_map logic and make it more reusable
libbpf: feature-detect arg:ctx tag support in kernel
ipvs: avoid stat macros calls from preemptible context
netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description
netfilter: nf_tables: skip dead set elements in netlink dump
netfilter: nf_tables: do not allow mismatch field size and set key length
...
Pull dma-mapping fixes from Christoph Hellwig:
- fix kerneldoc warnings (Randy Dunlap)
- better bounds checking in swiotlb (ZhangPeng)
* tag 'dma-mapping-6.8-2024-01-18' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: fix kernel-doc warnings
swiotlb: check alloc_size before the allocation of a new memory pool
Pull iommu updates from Joerg Roedel:
"Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm
SMMU implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
Intel VT-d driver:
- Cleanup and refactoring
AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes"
* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu: Don't reserve 0-length IOVA region
iommu/vt-d: Move inline helpers to header files
iommu/vt-d: Remove unused vcmd interfaces
iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
iommu/sva: Fix memory leak in iommu_sva_bind_device()
dt-bindings: iommu: rockchip: Add Rockchip RK3588
iommu/dma: Trace bounce buffer usage when mapping buffers
iommu/arm-smmu: Convert to domain_alloc_paging()
iommu/arm-smmu: Pass arm_smmu_domain to internal functions
iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
iommu/arm-smmu: Convert to a global static identity domain
iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
iommu/arm-smmu-v3: Add a type for the STE
iommu/arm-smmu-v3: disable stall for quiet_cd
iommu/qcom: restore IOMMU state if needed
iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
iommu/arm-smmu-qcom: Add missing GMU entry to match table
...
Pull tracing updates from Steven Rostedt:
- Allow kernel trace instance creation to specify what events are
created
Inside the kernel, a subsystem may create a tracing instance that it
can use to send events to user space. This sub-system may not care
about the thousands of events that exist in eventfs. Allow the
sub-system to specify what sub-systems of events it cares about, and
only those events are exposed to this instance.
- Allow the ring buffer to be broken up into bigger sub-buffers than
just the architecture page size.
A new tracefs file called "buffer_subbuf_size_kb" is created. The
user can now specify a minimum size the sub-buffer may be in
kilobytes. Note, that the implementation currently make the
sub-buffer size a power of 2 pages (1, 2, 4, 8, 16, ...) but the user
only writes in kilobyte size, and the sub-buffer will be updated to
the next size that it will can accommodate it. If the user writes in
10, it will change the size to be 4 pages on x86 (16K), as that is
the next available size that can hold 10K pages.
- Update the debug output when a corrupt time is detected in the ring
buffer. If the ring buffer detects inconsistent timestamps, there's a
debug config options that will dump the contents of the meta data of
the sub-buffer that is used for debugging. Add some more information
to this dump that helps with debugging.
- Add more timestamp debugging checks (only triggers when the config is
enabled)
- Increase the trace_seq iterator to 2 page sizes.
- Allow strings written into tracefs_marker to be larger. Up to just
under 2 page sizes (based on what trace_seq can hold).
- Increase the trace_maker_raw write to be as big as a sub-buffer can
hold.
- Remove 32 bit time stamp logic, now that the rb_time_cmpxchg() has
been removed.
- More selftests were added.
- Some code clean ups as well.
* tag 'trace-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits)
ring-buffer: Remove stale comment from ring_buffer_size()
tracing histograms: Simplify parse_actions() function
tracing/selftests: Remove exec permissions from trace_marker.tc test
ring-buffer: Use subbuf_order for buffer page masking
tracing: Update subbuffer with kilobytes not page order
ringbuffer/selftest: Add basic selftest to test changing subbuf order
ring-buffer: Add documentation on the buffer_subbuf_order file
ring-buffer: Just update the subbuffers when changing their allocation order
ring-buffer: Keep the same size when updating the order
tracing: Stop the tracing while changing the ring buffer subbuf size
tracing: Update snapshot order along with main buffer order
ring-buffer: Make sure the spare sub buffer used for reads has same size
ring-buffer: Do no swap cpu buffers if order is different
ring-buffer: Clear pages on error in ring_buffer_subbuf_order_set() failure
ring-buffer: Read and write to ring buffers with custom sub buffer size
ring-buffer: Set new size of the ring buffer sub page
ring-buffer: Add interface for configuring trace sub buffer size
ring-buffer: Page size per ring buffer
ring-buffer: Have ring_buffer_print_page_header() be able to access ring_buffer_iter
ring-buffer: Check if absolute timestamp goes backwards
...
Pull probes update from Masami Hiramatsu:
- Update the Kprobes trace event to show the actual function name in
notrace-symbol warning.
Instead of using the user specified symbol name, use "%ps" printk
format to show the actual symbol at the probe address. Since kprobe
event accepts the offset from symbol which is bigger than the symbol
size, the user specified symbol may not be the actual probed symbol.
* tag 'probes-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
trace/kprobe: Display the actual notrace function when rejecting a probe
Pull scheduler fix from Ingo Molnar:
"Fix a cpufreq related performance regression on certain systems, where
the CPU would remain at the lowest frequency, degrading performance
substantially"
* tag 'sched-urgent-2024-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix frequency selection for non-invariant case
Pull driver core updates from Greg KH:
"Here are the set of driver core and kernfs changes for 6.8-rc1.
Nothing major in here this release cycle, just lots of small cleanups
and some tweaks on kernfs that in the very end, got reverted and will
come back in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues"
* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
class: fix use-after-free in class_register()
PM: clk: make pm_clk_add_notifier() take a const pointer
EDAC: constantify the struct bus_type usage
kernfs: fix reference to renamed function
driver core: device.h: fix Excess kernel-doc description warning
driver core: class: fix Excess kernel-doc description warning
driver core: mark remaining local bus_type variables as const
driver core: container: make container_subsys const
driver core: bus: constantify subsys_register() calls
driver core: bus: make bus_sort_breadthfirst() take a const pointer
kernfs: d_obtain_alias(NULL) will do the right thing...
driver core: Better advertise dev_err_probe()
kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
initramfs: Expose retained initrd as sysfs file
fs/kernfs/dir: obey S_ISGID
kernel/cgroup: use kernfs_create_dir_ns()
...
Add enforcement of expected types for context arguments tagged with
arg:ctx (__arg_ctx) tag.
First, any program type will accept generic `void *` context type when
combined with __arg_ctx tag.
Besides accepting "canonical" struct names and `void *`, for a bunch of
program types for which program context is actually a named struct, we
allows a bunch of pragmatic exceptions to match real-world and expected
usage:
- for both kprobes and perf_event we allow `bpf_user_pt_regs_t *` as
canonical context argument type, where `bpf_user_pt_regs_t` is a
*typedef*, not a struct;
- for kprobes, we also always accept `struct pt_regs *`, as that's what
actually is passed as a context to any kprobe program;
- for perf_event, we resolve typedefs (unless it's `bpf_user_pt_regs_t`)
down to actual struct type and accept `struct pt_regs *`, or
`struct user_pt_regs *`, or `struct user_regs_struct *`, depending
on the actual struct type kernel architecture points `bpf_user_pt_regs_t`
typedef to; otherwise, canonical `struct bpf_perf_event_data *` is
expected;
- for raw_tp/raw_tp.w programs, `u64/long *` are accepted, as that's
what's expected with BPF_PROG() usage; otherwise, canonical
`struct bpf_raw_tracepoint_args *` is expected;
- tp_btf supports both `struct bpf_raw_tracepoint_args *` and `u64 *`
formats, both are coded as expections as tp_btf is actually a TRACING
program type, which has no canonical context type;
- iterator programs accept `struct bpf_iter__xxx *` structs, currently
with no further iterator-type specific enforcement;
- fentry/fexit/fmod_ret/lsm/struct_ops all accept `u64 *`;
- classic tracepoint programs, as well as syscall and freplace
programs allow any user-provided type.
In all other cases kernel will enforce exact match of struct name to
expected canonical type. And if user-provided type doesn't match that
expectation, verifier will emit helpful message with expected type name.
Note a bit unnatural way the check is done after processing all the
arguments. This is done to avoid conflict between bpf and bpf-next
trees. Once trees converge, a small follow up patch will place a simple
btf_validate_prog_ctx_type() check into a proper ARG_PTR_TO_CTX branch
(which bpf-next tree patch refactored already), removing duplicated
arg:ctx detection logic.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
