The host stream position is updated when no_stream_position is set as 0.
However current implementation updates host stream position only when
report data is larger than or equal to host period size which is decided
by the period size of host side. It maybe cause host stream position
update not in time. Therefore this patch introduces another field
"cont_update_posn", a boolean value aimed to update host stream position
continuously and based on period size of pipeline. It can get better
precise when need to update host stream position from firmware.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220509170425.54640-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
With additional tests with the introduction of a 'deep-buffer' PCM
device mixed with the regular low-latency path, we came up with two
improvements in the BE state machine and transitions. The short
explanation is that the BE cannot directly use the trigger commands
provided by the FE, and a translation is needed to deal with paused
states.
Commit 3aa1e96a2b ("ASoC: soc-pcm: fix BE handling of PAUSE_RELEASE")
did not modify the existing logic and kept the same logic for the following
transition
play FE1 -> BE state is START
pause FE1 -> BE state is PAUSED
play FE2 -> BE state is START
stop FE2 -> BE state is STOP <<< !!
release FE1 -> BE state is START
stop FE1 -> BE state is STOP
At the time it was identified by reviewers that a better solution
might consist in
play FE1 -> BE state is START
pause FE1 -> BE state is PAUSED
play FE2 -> BE state is START
stop FE2 -> BE state is PAUSE <<< !!
release FE1 -> BE state is START
stop FE1 -> BE state is STOP
This patch suggest a transition to PAUSE when all the 'active' streams
are paused. This would allow for a more consistent resource management
for platforms where PAUSE and STOP are handled differently.
To track the special case of an FE going from PAUSE_PUSH to STOP, we
add a state variable for each FE context. This 'fe_pause' boolean is
set on PAUSE_PUSH and cleared on either PAUSE_RELEASE and STOP
triggers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220406190056.233481-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card_jack_new() allowed to create jack kcontrol without pins,
but did not create kcontrols. The jack would not have kcontrols if pins
were not going to be added.
This renames the old snd_soc_card_jack_new() to
snd_soc_card_jack_new_pins() for use when pins are provided or will be
added later. The new snd_soc_card_jack_new() appropriately creates a
jack for use without pins and adds a kcontrol.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Link: https://lore.kernel.org/r/20220408041114.6024-1-akihiko.odaki@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow the component debugfs_prefix to be set from
snd_soc_component_driver. First use case is avoiding a duplicate
debugfs entry error in case a device has multiple components
which have the same name therefore.
Note that we don't set component->debugfs_prefix if it's set already.
That's needed because partially component->debugfs_prefix is set
before calling snd_soc_component_initialize().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/d18bff6a-1df1-5f95-0cf8-10dbaa62d7be@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function snd_soc_tdm_params_to_bclk() to calculate
the bclk from params info and the tdm sots configuration.
When using a TDM frame of N slots of width W bits:
bclk = sample_rate * N * W
As a convenience to simplify calling code, if the slot count or
slot width are 0 a value will be obtained from the params. This
allows calling code to use this one function to handle cases of
TDM where only one parameter is fixed, or I2S where the slot width
is fixed (for example to set a 32-bit slot for 24-bit samples).
Also as a convenience the slot count can optionally be rounded up
to a multiple. This is mainly useful for I2S systems, since I2S has
two phases of LRCLK the number of slots is always a multiple of 2.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405135419.1230088-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L41_NUM_OTP_ELEM is 100, but only 99 entries are defined in
the array otp_map_1/2[CS35L41_NUM_OTP_ELEM], this will trigger UBSAN
to report a shift-out-of-bounds warning in the cs35l41_otp_unpack()
since the last entry in the array will result in GENMASK(-1, 0).
UBSAN reports this problem:
UBSAN: shift-out-of-bounds in /home/hwang4/build/jammy/jammy/sound/soc/codecs/cs35l41-lib.c:836:8
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23
Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022
Call Trace:
<TASK>
show_stack+0x52/0x58
dump_stack_lvl+0x4a/0x5f
dump_stack+0x10/0x12
ubsan_epilogue+0x9/0x45
__ubsan_handle_shift_out_of_bounds.cold+0x61/0xef
? regmap_unlock_mutex+0xe/0x10
cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib]
cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41]
cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c]
? cs35l41_hda_i2c_remove+0x20/0x20 [snd_hda_scodec_cs35l41_i2c]
i2c_device_probe+0x252/0x2b0
Fixes: 6450ef5590 ("ASoC: cs35l41: CS35L41 Boosted Smart Amplifier")
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220328123535.50000-2-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull sound fixes from Takashi Iwai:
"Just a few fixes that have been gathered since the previous pull:
- An additional fix for potential PCM deadlocks
- A series of HD-audio CS8409 codec patches for new models
- Other device specific fixes for HD-audio, ASoC mediatek, Intel,
fsl, rockchip"
* tag 'sound-fix-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lock
ALSA: hda: Avoid unsol event during RPM suspending
ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020
ALSA: hda/cs8409: Add new Dolphin HW variants
ALSA: hda/cs8409: Disable HSBIAS_SENSE_EN for Cyborg
ALSA: hda/cs8409: Support new Warlock MLK Variants
ALSA: hda/cs8409: Fix Full Scale Volume setting for all variants
ALSA: hda/cs8409: Re-order quirk table into ascending order
ALSA: hda/cs8409: Fix Warlock to use mono mic configuration
ALSA: cs4236: fix an incorrect NULL check on list iterator
ALSA: hda/realtek: Enable headset mic on Lenovo P360
ASoC: SOF: Intel: Fix build error without SND_SOC_SOF_PCI_DEV
ALSA: hda/realtek: Add mute and micmut LED support for Zbook Fury 17 G9
ASoC: rockchip: i2s_tdm: Fixup config for SND_SOC_DAIFMT_DSP_A/B
ASoC: fsl-asoc-card: Fix jack_event() always return 0
ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLs
syzbot caught a potential deadlock between the PCM
runtime->buffer_mutex and the mm->mmap_lock. It was brought by the
recent fix to cover the racy read/write and other ioctls, and in that
commit, I overlooked a (hopefully only) corner case that may take the
revert lock, namely, the OSS mmap. The OSS mmap operation
exceptionally allows to re-configure the parameters inside the OSS
mmap syscall, where mm->mmap_mutex is already held. Meanwhile, the
copy_from/to_user calls at read/write operations also take the
mm->mmap_lock internally, hence it may lead to a AB/BA deadlock.
A similar problem was already seen in the past and we fixed it with a
refcount (in commit b248371628). The former fix covered only the
call paths with OSS read/write and OSS ioctls, while we need to cover
the concurrent access via both ALSA and OSS APIs now.
This patch addresses the problem above by replacing the buffer_mutex
lock in the read/write operations with a refcount similar as we've
used for OSS. The new field, runtime->buffer_accessing, keeps the
number of concurrent read/write operations. Unlike the former
buffer_mutex protection, this protects only around the
copy_from/to_user() calls; the other codes are basically protected by
the PCM stream lock. The refcount can be a negative, meaning blocked
by the ioctls. If a negative value is seen, the read/write aborts
with -EBUSY. In the ioctl side, OTOH, they check this refcount, too,
and set to a negative value for blocking unless it's already being
accessed.
Reported-by: syzbot+6e5c88838328e99c7e1c@syzkaller.appspotmail.com
Fixes: dca947d4d2 ("ALSA: pcm: Fix races among concurrent read/write and buffer changes")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000381a0d05db622a81@google.com
Link: https://lore.kernel.org/r/20220330120903.4738-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull flexible-array transformations from Gustavo Silva:
"Treewide patch that replaces zero-length arrays with flexible-array
members.
This has been baking in linux-next for a whole development cycle"
* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Replace zero-length arrays with flexible-array members
Currently we have neither proper check nor protection against the
concurrent calls of PCM hw_params and hw_free ioctls, which may result
in a UAF. Since the existing PCM stream lock can't be used for
protecting the whole ioctl operations, we need a new mutex to protect
those racy calls.
This patch introduced a new mutex, runtime->buffer_mutex, and applies
it to both hw_params and hw_free ioctl code paths. Along with it, the
both functions are slightly modified (the mmap_count check is moved
into the state-check block) for code simplicity.
Reported-by: Hu Jiahui <kirin.say@gmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: Updates for v5.18
Quite a quiet release for ASoC, lots of work on drivers and platforms
but nothing too groundbreaking but not much on the core itself:
- Start of moving SoF to support multiple IPC mechanisms.
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems.
- Some building blocks for use in forthcoming Intel AVS driver for
legacy Intel DSP firmwares.
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
To allow for more flexibility i.e. populating component DAIs dynamically
during its initialization, without being limited to topology loading
procedure, expose snd_soc_register(), snd_soc_dapm_new_dai_widgets() and
snd_soc_dapm_free_widget() functions.
Allows users to first check available resources e.g. number of PCMs
supported by HDAudio codec before allocating the number of DAPM
widgets needed. This prevents superfluous objects from being created or
allows driver to adjust to situation when resources are limited.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
In preparation for adding support for the new IPC version that has been
introduced in the SOF firmware, this patch set includes some clean ups
and necessary modifications to commonly used functions that will be
re-used across different IPC-specific code.
The NHLT information can be used to figure out which SSPs are enabled
in a platform.
The 'SSP' link type is too broad for machine drivers, since it can
cover the Bluetooth sideband and the analog audio codec connections,
so this helper exposes a parameter to filter with the device
type (DEVICE_I2S refers to analog audio codec in NHLT parlance).
The helper returns a mask, since more than one SSP may be used for
analog audio, e.g. the NHLT spec describes the use of SSP0 for
amplifiers and SSP1 for headset codec. Note that if more than one bit
is set, it's impossible to determine which SSP is connected to what
external component. Additional platform-specific information based on
e.g. DMI quirks would still be required in the machine driver to
configure the relevant dailinks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220308192610.392950-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some audio hardware cannot support the same slot width for all sample
widths, or a slot width equal to the sample width for all sample widths.
This is usually due either to limitations of the audio serial port or
system clocking restrictions.
A typical example would be:
- 16-bit samples in 16-bit slots
- 24-bit samples in 32-bit slots
The new dai-tdm-slot-width-map property allows setting a mapping of
sample widths and the corresponding tdm slot widths and slot counts.
Although the slot count is usually the same for all cases this does
allow for adding padding slots to maintain the same bitclk frequency.
The property is added to each endpoint node that needs the component
DAI to be told the TDM slot width and count.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220228172754.453783-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With few changes, snd_hda_codec_register() and its
unregister-counterpart can be re-used by ASoC drivers. While at it,
provide kernel doc for the exposed functions.
Due to ALSA-device vs ASoC-component organization differences, new
'snddev_managed' argument is specified allowing for better control over
codec registration process.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220214101404.4074026-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
UAPI and wireless changes were intentionally excluded from this patch
and will be sent out separately.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
