cfceccca0157307318905907fd7a4d4231494de7
83 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jesper Dangaard Brouer
|
d0bf7d5759 |
mm/slab: introduce kmem_cache flag SLAB_NO_MERGE
Allow API users of kmem_cache_create to specify that they don't want
any slab merge or aliasing (with similar sized objects). Use this in
kfence_test.
The SKB (sk_buff) kmem_cache slab is critical for network performance.
Network stack uses kmem_cache_{alloc,free}_bulk APIs to gain
performance by amortising the alloc/free cost.
For the bulk API to perform efficiently the slub fragmentation need to
be low. Especially for the SLUB allocator, the efficiency of bulk free
API depend on objects belonging to the same slab (page).
When running different network performance microbenchmarks, I started
to notice that performance was reduced (slightly) when machines had
longer uptimes. I believe the cause was 'skbuff_head_cache' got
aliased/merged into the general slub for 256 bytes sized objects (with
my kernel config, without CONFIG_HARDENED_USERCOPY).
For SKB kmem_cache network stack have reasons for not merging, but it
varies depending on kernel config (e.g. CONFIG_HARDENED_USERCOPY).
We want to explicitly set SLAB_NO_MERGE for this kmem_cache.
Another use case for the flag has been described by David Sterba [1]:
> This can be used for more fine grained control over the caches or for
> debugging builds where separate slabs can verify that no objects leak.
> The slab_nomerge boot option is too coarse and would need to be
> enabled on all testing hosts. There are some other ways how to disable
> merging, e.g. a slab constructor but this disables poisoning besides
> that it adds additional overhead. Other flags are internal and may
> have other semantics.
> A concrete example what motivates the flag. During 'btrfs balance'
> slab top reported huge increase in caches like
> 1330095 1330095 100% 0.10K 34105 39 136420K Acpi-ParseExt
> 1734684 1734684 100% 0.14K 61953 28 247812K pid_namespace
> 8244036 6873075 83% 0.11K 229001 36 916004K khugepaged_mm_slot
> which was confusing and that it's because of slab merging was not the
> first idea. After rebooting with slab_nomerge all the caches were
> from btrfs_ namespace as expected.
[1] https://lore.kernel.org/all/20230524101748.30714-1-dsterba@suse.com/
[ vbabka@suse.cz: rename to SLAB_NO_MERGE, change the flag value to the
one proposed by David so it does not collide with internal SLAB/SLUB
flags, write a comment for the flag, expand changelog, drop the skbuff
part to be handled spearately ]
Link: https://lore.kernel.org/all/167396280045.539803.7540459812377220500.stgit@firesoul/
Reported-by: David Sterba <dsterba@suse.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
|
||
Michael Ellerman
|
7581495ac8 |
mm: kfence: fix false positives on big endian
Since commit |
||
Linus Torvalds
|
7fa8a8ee94 |
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
||
|
Linus Torvalds
|
df45da57cb |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"ACPI:
- Improve error reporting when failing to manage SDEI on AGDI device
removal
Assembly routines:
- Improve register constraints so that the compiler can make use of
the zero register instead of moving an immediate #0 into a GPR
- Allow the compiler to allocate the registers used for CAS
instructions
CPU features and system registers:
- Cleanups to the way in which CPU features are identified from the
ID register fields
- Extend system register definition generation to handle Enum types
when defining shared register fields
- Generate definitions for new _EL2 registers and add new fields for
ID_AA64PFR1_EL1
- Allow SVE to be disabled separately from SME on the kernel
command-line
Tracing:
- Support for "direct calls" in ftrace, which enables BPF tracing for
arm64
Kdump:
- Don't bother unmapping the crashkernel from the linear mapping,
which then allows us to use huge (block) mappings and reduce TLB
pressure when a crashkernel is loaded.
Memory management:
- Try again to remove data cache invalidation from the coherent DMA
allocation path
- Simplify the fixmap code by mapping at page granularity
- Allow the kfence pool to be allocated early, preventing the rest of
the linear mapping from being forced to page granularity
Perf and PMU:
- Move CPU PMU code out to drivers/perf/ where it can be reused by
the 32-bit ARM architecture when running on ARMv8 CPUs
- Fix race between CPU PMU probing and pKVM host de-privilege
- Add support for Apple M2 CPU PMU
- Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event
dynamically, depending on what the CPU actually supports
- Minor fixes and cleanups to system PMU drivers
Stack tracing:
- Use the XPACLRI instruction to strip PAC from pointers, rather than
rolling our own function in C
- Remove redundant PAC removal for toolchains that handle this in
their builtins
- Make backtracing more resilient in the face of instrumentation
Miscellaneous:
- Fix single-step with KGDB
- Remove harmless warning when 'nokaslr' is passed on the kernel
command-line
- Minor fixes and cleanups across the board"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
KVM: arm64: Ensure CPU PMU probes before pKVM host de-privilege
arm64: kexec: include reboot.h
arm64: delete dead code in this_cpu_set_vectors()
arm64/cpufeature: Use helper macro to specify ID register for capabilites
drivers/perf: hisi: add NULL check for name
drivers/perf: hisi: Remove redundant initialized of pmu->name
arm64/cpufeature: Consistently use symbolic constants for min_field_value
arm64/cpufeature: Pull out helper for CPUID register definitions
arm64/sysreg: Convert HFGITR_EL2 to automatic generation
ACPI: AGDI: Improve error reporting for problems during .remove()
arm64: kernel: Fix kernel warning when nokaslr is passed to commandline
perf/arm-cmn: Fix port detection for CMN-700
arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step
arm64: move PAC masks to <asm/pointer_auth.h>
arm64: use XPACLRI to strip PAC
arm64: avoid redundant PAC stripping in __builtin_return_address()
arm64/sme: Fix some comments of ARM SME
arm64/signal: Alloc tpidr2 sigframe after checking system_supports_tpidr2()
arm64/signal: Use system_supports_tpidr2() to check TPIDR2
arm64/idreg: Don't disable SME when disabling SVE
...
|
||
Pavankumar Kondeti
|
1f6ab566cb |
printk: export console trace point for kcsan/kasan/kfence/kmsan
The console tracepoint is used by kcsan/kasan/kfence/kmsan test modules. Since this tracepoint is not exported, these modules iterate over all available tracepoints to find the console trace point. Export the trace point so that it can be directly used. Link: https://lkml.kernel.org/r/20230413100859.1492323-1-quic_pkondeti@quicinc.com Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Marco Elver <elver@google.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Peng Zhang
|
1ba3cbf3ec |
mm: kfence: improve the performance of __kfence_alloc() and __kfence_free()
In __kfence_alloc() and __kfence_free(), we will set and check canary. Assuming that the size of the object is close to 0, nearly 4k memory accesses are required because setting and checking canary is executed byte by byte. canary is now defined like this: KFENCE_CANARY_PATTERN(addr) ((u8)0xaa ^ (u8)((unsigned long)(addr) & 0x7)) Observe that canary is only related to the lower three bits of the address, so every 8 bytes of canary are the same. We can access 8-byte canary each time instead of byte-by-byte, thereby optimizing nearly 4k memory accesses to 4k/8 times. Use the bcc tool funclatency to measure the latency of __kfence_alloc() and __kfence_free(), the numbers (deleted the distribution of latency) is posted below. Though different object sizes will have an impact on the measurement, we ignore it for now and assume the average object size is roughly equal. Before patching: __kfence_alloc: avg = 5055 nsecs, total: 5515252 nsecs, count: 1091 __kfence_free: avg = 5319 nsecs, total: 9735130 nsecs, count: 1830 After patching: __kfence_alloc: avg = 3597 nsecs, total: 6428491 nsecs, count: 1787 __kfence_free: avg = 3046 nsecs, total: 3415390 nsecs, count: 1121 The numbers indicate that there is ~30% - ~40% performance improvement. Link: https://lkml.kernel.org/r/20230403122738.6006-1-zhangpeng.00@bytedance.com Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Muchun Song
|
1f2803b266 |
mm: kfence: fix handling discontiguous page
The struct pages could be discontiguous when the kfence pool is allocated
via alloc_contig_pages() with CONFIG_SPARSEMEM and
!CONFIG_SPARSEMEM_VMEMMAP.
This may result in setting PG_slab and memcg_data to a arbitrary
address (may be not used as a struct page), which in the worst case
might corrupt the kernel.
So the iteration should use nth_page().
Link: https://lkml.kernel.org/r/20230323025003.94447-1-songmuchun@bytedance.com
Fixes:
|
||
|
Muchun Song
|
3ee2d7471f |
mm: kfence: fix PG_slab and memcg_data clearing
It does not reset PG_slab and memcg_data when KFENCE fails to initialize
kfence pool at runtime. It is reporting a "Bad page state" message when
kfence pool is freed to buddy. The checking of whether it is a compound
head page seems unnecessary since we already guarantee this when
allocating kfence pool. Remove the check to simplify the code.
Link: https://lkml.kernel.org/r/20230320030059.20189-1-songmuchun@bytedance.com
Fixes:
|
||
Zhenhua Huang
|
bfa7965b33 |
mm,kfence: decouple kfence from page granularity mapping judgement
Kfence only needs its pool to be mapped as page granularity, if it is inited early. Previous judgement was a bit over protected. From [1], Mark suggested to "just map the KFENCE region a page granularity". So I decouple it from judgement and do page granularity mapping for kfence pool only. Need to be noticed that late init of kfence pool still requires page granularity mapping. Page granularity mapping in theory cost more(2M per 1GB) memory on arm64 platform. Like what I've tested on QEMU(emulated 1GB RAM) with gki_defconfig, also turning off rodata protection: Before: [root@liebao ]# cat /proc/meminfo MemTotal: 999484 kB After: [root@liebao ]# cat /proc/meminfo MemTotal: 1001480 kB To implement this, also relocate the kfence pool allocation before the linear mapping setting up, arm64_kfence_alloc_pool is to allocate phys addr, __kfence_pool is to be set after linear mapping set up. LINK: [1] https://lore.kernel.org/linux-arm-kernel/Y+IsdrvDNILA59UN@FVFF77S0Q05N/ Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Marco Elver <elver@google.com> Link: https://lore.kernel.org/r/1679066974-690-1-git-send-email-quic_zhenhuah@quicinc.com Signed-off-by: Will Deacon <will@kernel.org> |
||
Marco Elver
|
2e08ca1802 |
kfence: avoid passing -g for test
Nathan reported that when building with GNU as and a version of clang that
defaults to DWARF5:
$ make -skj"$(nproc)" ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- \
LLVM=1 LLVM_IAS=0 O=build \
mrproper allmodconfig mm/kfence/kfence_test.o
/tmp/kfence_test-08a0a0.s: Assembler messages:
/tmp/kfence_test-08a0a0.s:14627: Error: non-constant .uleb128 is not supported
/tmp/kfence_test-08a0a0.s:14628: Error: non-constant .uleb128 is not supported
/tmp/kfence_test-08a0a0.s:14632: Error: non-constant .uleb128 is not supported
/tmp/kfence_test-08a0a0.s:14633: Error: non-constant .uleb128 is not supported
/tmp/kfence_test-08a0a0.s:14639: Error: non-constant .uleb128 is not supported
...
This is because `-g` defaults to the compiler debug info default. If the
assembler does not support some of the directives used, the above errors
occur. To fix, remove the explicit passing of `-g`.
All the test wants is that stack traces print valid function names, and
debug info is not required for that. (I currently cannot recall why I
added the explicit `-g`.)
Link: https://lkml.kernel.org/r/20230316224705.709984-1-elver@google.com
Fixes:
|
||
|
Muchun Song
|
1c86a188e0 |
mm: kfence: fix using kfence_metadata without initialization in show_object()
The variable kfence_metadata is initialized in kfence_init_pool(), then,
it is not initialized if kfence is disabled after booting. In this case,
kfence_metadata will be used (e.g. ->lock and ->state fields) without
initialization when reading /sys/kernel/debug/kfence/objects. There will
be a warning if you enable CONFIG_DEBUG_SPINLOCK. Fix it by creating
debugfs files when necessary.
Link: https://lkml.kernel.org/r/20230315034441.44321-1-songmuchun@bytedance.com
Fixes:
|
||
|
Linus Torvalds
|
48ea09cdda |
Merge tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- Convert flexible array members, fix -Wstringop-overflow warnings, and
fix KCFI function type mismatches that went ignored by maintainers
(Gustavo A. R. Silva, Nathan Chancellor, Kees Cook)
- Remove the remaining side-effect users of ksize() by converting
dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add
more __alloc_size attributes, and introduce full testing of all
allocator functions. Finally remove the ksize() side-effect so that
each allocation-aware checker can finally behave without exceptions
- Introduce oops_limit (default 10,000) and warn_limit (default off) to
provide greater granularity of control for panic_on_oops and
panic_on_warn (Jann Horn, Kees Cook)
- Introduce overflows_type() and castable_to_type() helpers for cleaner
overflow checking
- Improve code generation for strscpy() and update str*() kern-doc
- Convert strscpy and sigphash tests to KUnit, and expand memcpy tests
- Always use a non-NULL argument for prepare_kernel_cred()
- Disable structleak plugin in FORTIFY KUnit test (Anders Roxell)
- Adjust orphan linker section checking to respect CONFIG_WERROR (Xin
Li)
- Make sure siginfo is cleared for forced SIGKILL (haifeng.xu)
- Fix um vs FORTIFY warnings for always-NULL arguments
* tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (31 commits)
ksmbd: replace one-element arrays with flexible-array members
hpet: Replace one-element array with flexible-array member
um: virt-pci: Avoid GCC non-NULL warning
signal: Initialize the info in ksignal
lib: fortify_kunit: build without structleak plugin
panic: Expose "warn_count" to sysfs
panic: Introduce warn_limit
panic: Consolidate open-coded panic_on_warn checks
exit: Allow oops_limit to be disabled
exit: Expose "oops_count" to sysfs
exit: Put an upper limit on how often we can oops
panic: Separate sysctl logic from CONFIG_SMP
mm/pgtable: Fix multiple -Wstringop-overflow warnings
mm: Make ksize() a reporting-only function
kunit/fortify: Validate __alloc_size attribute results
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
driver core: Add __alloc_size hint to devm allocators
overflow: Introduce overflows_type() and castable_to_type()
coredump: Proactively round up to kmalloc bucket size
...
|
||
|
Linus Torvalds
|
e2ca6ba6ba |
Merge tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton: - More userfaultfs work from Peter Xu - Several convert-to-folios series from Sidhartha Kumar and Huang Ying - Some filemap cleanups from Vishal Moola - David Hildenbrand added the ability to selftest anon memory COW handling - Some cpuset simplifications from Liu Shixin - Addition of vmalloc tracing support by Uladzislau Rezki - Some pagecache folioifications and simplifications from Matthew Wilcox - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it - Miguel Ojeda contributed some cleanups for our use of the __no_sanitize_thread__ gcc keyword. This series should have been in the non-MM tree, my bad - Naoya Horiguchi improved the interaction between memory poisoning and memory section removal for huge pages - DAMON cleanups and tuneups from SeongJae Park - Tony Luck fixed the handling of COW faults against poisoned pages - Peter Xu utilized the PTE marker code for handling swapin errors - Hugh Dickins reworked compound page mapcount handling, simplifying it and making it more efficient - Removal of the autonuma savedwrite infrastructure from Nadav Amit and David Hildenbrand - zram support for multiple compression streams from Sergey Senozhatsky - David Hildenbrand reworked the GUP code's R/O long-term pinning so that drivers no longer need to use the FOLL_FORCE workaround which didn't work very well anyway - Mel Gorman altered the page allocator so that local IRQs can remnain enabled during per-cpu page allocations - Vishal Moola removed the try_to_release_page() wrapper - Stefan Roesch added some per-BDI sysfs tunables which are used to prevent network block devices from dirtying excessive amounts of pagecache - David Hildenbrand did some cleanup and repair work on KSM COW breaking - Nhat Pham and Johannes Weiner have implemented writeback in zswap's zsmalloc backend - Brian Foster has fixed a longstanding corner-case oddity in file[map]_write_and_wait_range() - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang Chen - Shiyang Ruan has done some work on fsdax, to make its reflink mode work better under xfstests. Better, but still not perfect - Christoph Hellwig has removed the .writepage() method from several filesystems. They only need .writepages() - Yosry Ahmed wrote a series which fixes the memcg reclaim target beancounting - David Hildenbrand has fixed some of our MM selftests for 32-bit machines - Many singleton patches, as usual * tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits) mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio mm: mmu_gather: allow more than one batch of delayed rmaps mm: fix typo in struct pglist_data code comment kmsan: fix memcpy tests mm: add cond_resched() in swapin_walk_pmd_entry() mm: do not show fs mm pc for VM_LOCKONFAULT pages selftests/vm: ksm_functional_tests: fixes for 32bit selftests/vm: cow: fix compile warning on 32bit selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem mm,thp,rmap: fix races between updates of subpages_mapcount mm: memcg: fix swapcached stat accounting mm: add nodes= arg to memory.reclaim mm: disable top-tier fallback to reclaim on proactive reclaim selftests: cgroup: make sure reclaim target memcg is unprotected selftests: cgroup: refactor proactive reclaim code to reclaim_until() mm: memcg: fix stale protection of reclaim target memcg mm/mmap: properly unaccount memory on mas_preallocate() failure omfs: remove ->writepage jfs: remove ->writepage ... |
||
|
Linus Torvalds
|
268325bda5 |
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
|
||
Kees Cook
|
79cc1ba7ba |
panic: Consolidate open-coded panic_on_warn checks
Several run-time checkers (KASAN, UBSAN, KFENCE, KCSAN, sched) roll their own warnings, and each check "panic_on_warn". Consolidate this into a single function so that future instrumentation can be added in a single location. Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Segall <bsegall@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Gow <davidgow@google.com> Cc: tangmeng <tangmeng@uniontech.com> Cc: Jann Horn <jannh@google.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Petr Mladek <pmladek@suse.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: kasan-dev@googlegroups.com Cc: linux-mm@kvack.org Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Link: https://lore.kernel.org/r/20221117234328.594699-4-keescook@chromium.org |
||
|
Pavankumar Kondeti
|
c66b6ead74 |
mm/kfence: remove hung_task cruft
commit
|
||
|
Marco Elver
|
747c0f35f2 |
kfence: fix stack trace pruning
Commit |
||
Jason A. Donenfeld
|
e8a533cbeb |
treewide: use get_random_u32_inclusive() when possible
These cases were done with this Coccinelle: @@ expression H; expression L; @@ - (get_random_u32_below(H) + L) + get_random_u32_inclusive(L, H + L - 1) @@ expression H; expression L; expression E; @@ get_random_u32_inclusive(L, H - + E - - E ) @@ expression H; expression L; expression E; @@ get_random_u32_inclusive(L, H - - E - + E ) @@ expression H; expression L; expression E; expression F; @@ get_random_u32_inclusive(L, H - - E + F - + E ) @@ expression H; expression L; expression E; expression F; @@ get_random_u32_inclusive(L, H - + E + F - - E ) And then subsequently cleaned up by hand, with several automatic cases rejected if it didn't make sense contextually. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
|
Jason A. Donenfeld
|
8032bf1233 |
treewide: use get_random_u32_below() instead of deprecated function
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
|
Linus Torvalds
|
27bc50fc90 |
Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ... |
||
|
Linus Torvalds
|
8adc0486f3 |
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld: - Huawei reported that when they updated their kernel from 4.4 to something much newer, some userspace code they had broke, the culprit being the accidental removal of O_NONBLOCK from /dev/random way back in 5.6. It's been gone for over 2 years now and this is the first we've heard of it, but userspace breakage is userspace breakage, so O_NONBLOCK is now back. - Use randomness from hardware RNGs much more often during early boot, at the same interval that crng reseeds are done, from Dominik. - A semantic change in hardware RNG throttling, so that the hwrng framework can properly feed random.c with randomness from hardware RNGs that aren't specifically marked as creditable. A related patch coming to you via Herbert's hwrng tree depends on this one, not to compile, but just to function properly, so you may want to merge this PULL before that one. - A fix to clamp credited bits from the interrupts pool to the size of the pool sample. This is mainly just a theoretical fix, as it'd be pretty hard to exceed it in practice. - Oracle reported that InfiniBand TCP latency regressed by around 10-15% after a change a few cycles ago made at the request of the RT folks, in which we hoisted a somewhat rare operation (1 in 1024 times) out of the hard IRQ handler and into a workqueue, a pretty common and boring pattern. It turns out, though, that scheduling a worker from there has overhead of its own, whereas scheduling a timer on that same CPU for the next jiffy amortizes better and doesn't incur the same overhead. I also eliminated a cache miss by moving the work_struct (and subsequently, the timer_list) to below a critical cache line, so that the more critical members that are accessed on every hard IRQ aren't split between two cache lines. - The boot-time initialization of the RNG has been split into two approximate phases: what we can accomplish before timekeeping is possible and what we can accomplish after. This winds up being useful so that we can use RDRAND to seed the RNG before CONFIG_SLAB_FREELIST_RANDOM=y systems initialize slabs, in addition to other early uses of randomness. The effect is that systems with RDRAND (or a bootloader seed) will never see any warnings at all when setting CONFIG_WARN_ALL_UNSEEDED_RANDOM=y. And kfence benefits from getting a better seed of its own. - Small systems without much entropy sometimes wind up putting some truncated serial number read from flash into hostname, so contribute utsname changes to the RNG, without crediting. - Add smaller batches to serve requests for smaller integers, and make use of them when people ask for random numbers bounded by a given compile-time constant. This has positive effects all over the tree, most notably in networking and kfence. - The original jitter algorithm intended (I believe) to schedule the timer for the next jiffy, not the next-next jiffy, yet it used mod_timer(jiffies + 1), which will fire on the next-next jiffy, instead of what I believe was intended, mod_timer(jiffies), which will fire on the next jiffy. So fix that. - Fix a comment typo, from William. * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: random: clear new batches when bringing new CPUs online random: fix typos in get_random_bytes() comment random: schedule jitter credit for next jiffy, not in two jiffies prandom: make use of smaller types in prandom_u32_max random: add 8-bit and 16-bit batches utsname: contribute changes to RNG random: use init_utsname() instead of utsname() kfence: use better stack hash seed random: split initialization into early step and later step random: use expired timer rather than wq for mixing fast pool random: avoid reading two cache lines on irq randomness random: clamp credited irq bits to maximum mixed random: throttle hwrng writes if no entropy is credited random: use hwgenerator randomness more frequently at early boot random: restore O_NONBLOCK support |
||
Liu Shixin
|
6b1964e685 |
mm: kfence: convert to DEFINE_SEQ_ATTRIBUTE
Use DEFINE_SEQ_ATTRIBUTE helper macro to simplify the code. Link: https://lkml.kernel.org/r/20220909083140.3592919-1-liushixin2@huawei.com Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Jason A. Donenfeld
|
08475dab7c |
kfence: use better stack hash seed
As of the prior commit, the RNG will have incorporated both a cycle counter value and RDRAND, in addition to various other environmental noise. Therefore, using get_random_u32() will supply a stronger seed than simply using random_get_entropy(). N.B.: random_get_entropy() should be considered an internal API of random.c and not generally consumed. Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Marco Elver <elver@google.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
Imran Khan
|
b84e04f1ba |
kfence: add sysfs interface to disable kfence for selected slabs.
By default kfence allocation can happen for any slab object, whose size is up to PAGE_SIZE, as long as that allocation is the first allocation after expiration of kfence sample interval. But in certain debugging scenarios we may be interested in debugging corruptions involving some specific slub objects like dentry or ext4_* etc. In such cases limiting kfence for allocations involving only specific slub objects will increase the probablity of catching the issue since kfence pool will not be consumed by other slab objects. This patch introduces a sysfs interface '/sys/kernel/slab/<name>/skip_kfence' to disable kfence for specific slabs. Having the interface work in this way does not impact current/default behavior of kfence and allows us to use kfence for specific slabs (when needed) as well. The decision to skip/use kfence is taken depending on whether kmem_cache.flags has (newly introduced) SLAB_SKIP_KFENCE flag set or not. Link: https://lkml.kernel.org/r/20220814195353.2540848-1-imran.f.khan@oracle.com Signed-off-by: Imran Khan <imran.f.khan@oracle.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Hyeonggon Yoo
|
b140513524 |
mm/sl[au]b: generalize kmalloc subsystem
Now everything in kmalloc subsystem can be generalized. Let's do it! Generalize __do_kmalloc_node(), __kmalloc_node_track_caller(), kfree(), __ksize(), __kmalloc(), __kmalloc_node() and move them to slab_common.c. In the meantime, rename kmalloc_large_node_notrace() to __kmalloc_large_node() and make it static as it's now only called in slab_common.c. [ feng.tang@intel.com: adjust kfence skip list to include __kmem_cache_free so that kfence kunit tests do not fail ] Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Linus Torvalds
|
6614a3c316 |
Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
|
||
Yee Lee
|
07313a2b29 |
mm: kfence: apply kmemleak_ignore_phys on early allocated pool
This patch solves two issues.
(1) The pool allocated by memblock needs to unregister from
kmemleak scanning. Apply kmemleak_ignore_phys to replace the
original kmemleak_free as its address now is stored in the phys tree.
(2) The pool late allocated by page-alloc doesn't need to unregister.
Move out the freeing operation from its call path.
Link: https://lkml.kernel.org/r/20220628113714.7792-2-yee.lee@mediatek.com
Fixes:
|
||
Linus Walleij
|
9e7ee421ac |
mm: kfence: pass a pointer to virt_to_page()
Functions that work on a pointer to virtual memory such as virt_to_pfn() and users of that function such as virt_to_page() are supposed to pass a pointer to virtual memory, ideally a (void *) or other pointer. However since many architectures implement virt_to_pfn() as a macro, this function becomes polymorphic and accepts both a (unsigned long) and a (void *). If we instead implement a proper virt_to_pfn(void *addr) function the following happens (occurred on arch/arm): mm/kfence/core.c:558:30: warning: passing argument 1 of 'virt_to_pfn' makes pointer from integer without a cast [-Wint-conversion] In one case we can refer to __kfence_pool directly (and that is a proper (char *) pointer) and in the other call site we use an explicit cast. Link: https://lkml.kernel.org/r/20220630084124.691207-4-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Jason A. Donenfeld
|
327b18b7aa |
mm/kfence: select random number before taking raw lock
The RNG uses vanilla spinlocks, not raw spinlocks, so kfence should pick
its random numbers before taking its raw spinlocks. This also has the
nice effect of doing less work inside the lock. It should fix a splat
that Geert saw with CONFIG_PROVE_RAW_LOCK_NESTING:
dump_backtrace.part.0+0x98/0xc0
show_stack+0x14/0x28
dump_stack_lvl+0xac/0xec
dump_stack+0x14/0x2c
__lock_acquire+0x388/0x10a0
lock_acquire+0x190/0x2c0
_raw_spin_lock_irqsave+0x6c/0x94
crng_make_state+0x148/0x1e4
_get_random_bytes.part.0+0x4c/0xe8
get_random_u32+0x4c/0x140
__kfence_alloc+0x460/0x5c4
kmem_cache_alloc_trace+0x194/0x1dc
__kthread_create_on_node+0x5c/0x1a8
kthread_create_on_node+0x58/0x7c
printk_start_kthread.part.0+0x34/0xa8
printk_activate_kthreads+0x4c/0x54
do_one_initcall+0xec/0x278
kernel_init_freeable+0x11c/0x214
kernel_init+0x24/0x124
ret_from_fork+0x10/0x20
Link: https://lkml.kernel.org/r/20220609123319.17576-1-Jason@zx2c4.com
Fixes:
|
||
|
Linus Torvalds
|
98931dd95f |
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
|
||
|
Linus Torvalds
|
64e34b50d7 |
Merge tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests and framework:
- introduce _NULL and _NOT_NULL macros to pointer error checks
- rework kunit_resource allocation policy to fix memory leaks when
caller doesn't specify free() function to be used when allocating
memory using kunit_add_resource() and kunit_alloc_resource() funcs.
- add ability to specify suite-level init and exit functions"
* tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits)
kunit: tool: Use qemu-system-i386 for i386 runs
kunit: fix executor OOM error handling logic on non-UML
kunit: tool: update riscv QEMU config with new serial dependency
kcsan: test: use new suite_{init,exit} support
kunit: tool: Add list of all valid test configs on UML
kunit: take `kunit_assert` as `const`
kunit: tool: misc cleanups
kunit: tool: minor cosmetic cleanups in kunit_parser.py
kunit: tool: make parser stop overwriting status of suites w/ no_tests
kunit: tool: remove dead parse_crash_in_log() logic
kunit: tool: print clearer error message when there's no TAP output
kunit: tool: stop using a shell to run kernel under QEMU
kunit: tool: update test counts summary line format
kunit: bail out of test filtering logic quicker if OOM
lib/Kconfig.debug: change KUnit tests to default to KUNIT_ALL_TESTS
kunit: Rework kunit_resource allocation policy
kunit: fix debugfs code to use enum kunit_status, not bool
kfence: test: use new suite_{init/exit} support, add .kunitconfig
kunit: add ability to specify suite-level init and exit functions
kunit: rename print_subtest_{start,end} for clarity (s/subtest/suite)
...
|
||
Kefeng Wang
|
f403f22f8c |
mm: kfence: use PAGE_ALIGNED helper
Use PAGE_ALIGNED macro instead of IS_ALIGNED and passing PAGE_SIZE. Link: https://lkml.kernel.org/r/20220520021833.121405-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Jackie Liu
|
83d7d04f9d |
mm/kfence: print disabling or re-enabling message
By printing information, we can friendly prompt the status change information of kfence by dmesg and record by syslog. Also, set kfence_enabled to false only when needed. Link: https://lkml.kernel.org/r/20220518073105.3160335-1-liu.yun@linux.dev Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Co-developed-by: Marco Elver <elver@google.com> Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
huangshaobo
|
3c81b3bb0a |
kfence: enable check kfence canary on panic via boot param
Out-of-bounds accesses that aren't caught by a guard page will result in corruption of canary memory. In pathological cases, where an object has certain alignment requirements, an out-of-bounds access might never be caught by the guard page. Such corruptions, however, are only detected on kfree() normally. If the bug causes the kernel to panic before kfree(), KFENCE has no opportunity to report the issue. Such corruptions may also indicate failing memory or other faults. To provide some more information in such cases, add the option to check canary bytes on panic. This might help narrow the search for the panic cause; but, due to only having the allocation stack trace, such reports are difficult to use to diagnose an issue alone. In most cases, such reports are inactionable, and is therefore an opt-in feature (disabled by default). [akpm@linux-foundation.org: add __read_mostly, per Marco] Link: https://lkml.kernel.org/r/20220425022456.44300-1-huangshaobo6@huawei.com Signed-off-by: huangshaobo <huangshaobo6@huawei.com> Suggested-by: chenzefeng <chenzefeng2@huawei.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: Wangbing <wangbing6@huawei.com> Cc: Jubin Zhong <zhongjubin@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Hyeonggon Yoo
|
2839b0999c |
mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool
When kfence fails to initialize kfence pool, it frees the pool. But it does not reset memcg_data and PG_slab flag. Below is a BUG because of this. Let's fix it by resetting memcg_data and PG_slab flag before free. [ 0.089149] BUG: Bad page state in process swapper/0 pfn:3d8e06 [ 0.089149] page:ffffea46cf638180 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x3d8e06 [ 0.089150] memcg:ffffffff94a475d1 [ 0.089150] flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff) [ 0.089151] raw: 0017ffffc0000200 ffffea46cf638188 ffffea46cf638188 0000000000000000 [ 0.089152] raw: 0000000000000000 0000000000000000 00000000ffffffff ffffffff94a475d1 [ 0.089152] page dumped because: page still charged to cgroup [ 0.089153] Modules linked in: [ 0.089153] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G B W 5.18.0-rc1+ #965 [ 0.089154] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 0.089154] Call Trace: [ 0.089155] <TASK> [ 0.089155] dump_stack_lvl+0x49/0x5f [ 0.089157] dump_stack+0x10/0x12 [ 0.089158] bad_page.cold+0x63/0x94 [ 0.089159] check_free_page_bad+0x66/0x70 [ 0.089160] __free_pages_ok+0x423/0x530 [ 0.089161] __free_pages_core+0x8e/0xa0 [ 0.089162] memblock_free_pages+0x10/0x12 [ 0.089164] memblock_free_late+0x8f/0xb9 [ 0.089165] kfence_init+0x68/0x92 [ 0.089166] start_kernel+0x789/0x992 [ 0.089167] x86_64_start_reservations+0x24/0x26 [ 0.089168] x86_64_start_kernel+0xa9/0xaf [ 0.089170] secondary_startup_64_no_verify+0xd5/0xdb [ 0.089171] </TASK> Link: https://lkml.kernel.org/r/YnPG3pQrqfcgOlVa@hyeyoo Fixes: |
||
Daniel Latypov
|
3b91f82658 |
kfence: test: use new suite_{init/exit} support, add .kunitconfig
Currently, the kfence test suite could not run via "normal" means since KUnit didn't support per-suite setup/teardown. So it manually called internal kunit functions to run itself. This has some downsides, like missing TAP headers => can't use kunit.py to run or even parse the test results (w/o tweaks). Use the newly added support and convert it over, adding a .kunitconfig so it's even easier to run from kunit.py. People can now run the test via $ ./tools/testing/kunit/kunit.py run --kunitconfig=mm/kfence --arch=x86_64 ... [11:02:32] Testing complete. Passed: 23, Failed: 0, Crashed: 0, Skipped: 2, Errors: 0 [11:02:32] Elapsed time: 43.562s total, 0.003s configuring, 9.268s building, 34.281s running Cc: kasan-dev@googlegroups.com Signed-off-by: Daniel Latypov <dlatypov@google.com> Tested-by: David Gow <davidgow@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Marco Elver
|
2dfe63e61c |
mm, kfence: support kmem_dump_obj() for KFENCE objects
Calling kmem_obj_info() via kmem_dump_obj() on KFENCE objects has been producing garbage data due to the object not actually being maintained by SLAB or SLUB. Fix this by implementing __kfence_obj_info() that copies relevant information to struct kmem_obj_info when the object was allocated by KFENCE; this is called by a common kmem_obj_info(), which also calls the slab/slub/slob specific variant now called __kmem_obj_info(). For completeness, kmem_dump_obj() now displays if the object was allocated by KFENCE. Link: https://lore.kernel.org/all/20220323090520.GG16885@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/20220406131558.3558585-1-elver@google.com Fixes: |
||
|
Muchun Song
|
8f0b364973 |
mm: kfence: fix objcgs vector allocation
If the kfence object is allocated to be used for objects vector, then
this slot of the pool eventually being occupied permanently since the
vector is never freed. The solutions could be (1) freeing vector when
the kfence object is freed or (2) allocating all vectors statically.
Since the memory consumption of object vectors is low, it is better to
chose (2) to fix the issue and it is also can reduce overhead of vectors
allocating in the future.
Link: https://lkml.kernel.org/r/20220328132843.16624-1-songmuchun@bytedance.com
Fixes:
|
||
|
Marco Elver
|
737b6a10ac |
kfence: allow use of a deferrable timer
Allow the use of a deferrable timer, which does not force CPU wake-ups when the system is idle. A consequence is that the sample interval becomes very unpredictable, to the point that it is not guaranteed that the KFENCE KUnit test still passes. Nevertheless, on power-constrained systems this may be preferable, so let's give the user the option should they accept the above trade-off. Link: https://lkml.kernel.org/r/20220308141415.3168078-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Peng Liu
|
3cb1c9620e |
kfence: test: try to avoid test_gfpzero trigger rcu_stall
When CONFIG_KFENCE_NUM_OBJECTS is set to a big number, kfence kunit-test-case test_gfpzero will eat up nearly all the CPU's resources and rcu_stall is reported as the following log which is cut from a physical server. rcu: INFO: rcu_sched self-detected stall on CPU rcu: 68-....: (14422 ticks this GP) idle=6ce/1/0x4000000000000002 softirq=592/592 fqs=7500 (t=15004 jiffies g=10677 q=20019) Task dump for CPU 68: task:kunit_try_catch state:R running task stack: 0 pid: 9728 ppid: 2 flags:0x0000020a Call trace: dump_backtrace+0x0/0x1e4 show_stack+0x20/0x2c sched_show_task+0x148/0x170 ... rcu_sched_clock_irq+0x70/0x180 update_process_times+0x68/0xb0 tick_sched_handle+0x38/0x74 ... gic_handle_irq+0x78/0x2c0 el1_irq+0xb8/0x140 kfree+0xd8/0x53c test_alloc+0x264/0x310 [kfence_test] test_gfpzero+0xf4/0x840 [kfence_test] kunit_try_run_case+0x48/0x20c kunit_generic_run_threadfn_adapter+0x28/0x34 kthread+0x108/0x13c ret_from_fork+0x10/0x18 To avoid rcu_stall and unacceptable latency, a schedule point is added to test_gfpzero. Link: https://lkml.kernel.org/r/20220309083753.1561921-4-liupeng256@huawei.com Signed-off-by: Peng Liu <liupeng256@huawei.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Wang Kefeng <wangkefeng.wang@huawei.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: David Gow <davidgow@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Peng Liu
|
adf5054570 |
kunit: fix UAF when run kfence test case test_gfpzero
Patch series "kunit: fix a UAF bug and do some optimization", v2. This series is to fix UAF (use after free) when running kfence test case test_gfpzero, which is time costly. This UAF bug can be easily triggered by setting CONFIG_KFENCE_NUM_OBJECTS = 65535. Furthermore, some optimization for kunit tests has been done. This patch (of 3): Kunit will create a new thread to run an actual test case, and the main process will wait for the completion of the actual test thread until overtime. The variable "struct kunit test" has local property in function kunit_try_catch_run, and will be used in the test case thread. Task kunit_try_catch_run will free "struct kunit test" when kunit runs overtime, but the actual test case is still run and an UAF bug will be triggered. The above problem has been both observed in a physical machine and qemu platform when running kfence kunit tests. The problem can be triggered when setting CONFIG_KFENCE_NUM_OBJECTS = 65535. Under this setting, the test case test_gfpzero will cost hours and kunit will run to overtime. The follows show the panic log. BUG: unable to handle page fault for address: ffffffff82d882e9 Call Trace: kunit_log_append+0x58/0xd0 ... test_alloc.constprop.0.cold+0x6b/0x8a [kfence_test] test_gfpzero.cold+0x61/0x8ab [kfence_test] kunit_try_run_case+0x4c/0x70 kunit_generic_run_threadfn_adapter+0x11/0x20 kthread+0x166/0x190 ret_from_fork+0x22/0x30 Kernel panic - not syncing: Fatal exception Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 To solve this problem, the test case thread should be stopped when the kunit frame runs overtime. The stop signal will send in function kunit_try_catch_run, and test_gfpzero will handle it. Link: https://lkml.kernel.org/r/20220309083753.1561921-1-liupeng256@huawei.com Link: https://lkml.kernel.org/r/20220309083753.1561921-2-liupeng256@huawei.com Signed-off-by: Peng Liu <liupeng256@huawei.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Wang Kefeng <wangkefeng.wang@huawei.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: David Gow <davidgow@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Tianchen Ding
|
b33f778bba |
kfence: alloc kfence_pool after system startup
Allow enabling KFENCE after system startup by allocating its pool via the page allocator. This provides the flexibility to enable KFENCE even if it wasn't enabled at boot time. Link: https://lkml.kernel.org/r/20220307074516.6920-3-dtcccc@linux.alibaba.com Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Peng Liu <liupeng256@huawei.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Tianchen Ding
|
698361bca2 |
kfence: allow re-enabling KFENCE after system startup
Patch series "provide the flexibility to enable KFENCE", v3. If CONFIG_CONTIG_ALLOC is not supported, we fallback to try alloc_pages_exact(). Allocating pages in this way has limits about MAX_ORDER (default 11). So we will not support allocating kfence pool after system startup with a large KFENCE_NUM_OBJECTS. When handling failures in kfence_init_pool_late(), we pair free_pages_exact() to alloc_pages_exact() for compatibility consideration, though it actually does the same as free_contig_range(). This patch (of 2): If once KFENCE is disabled by: echo 0 > /sys/module/kfence/parameters/sample_interval KFENCE could never be re-enabled until next rebooting. Allow re-enabling it by writing a positive num to sample_interval. Link: https://lkml.kernel.org/r/20220307074516.6920-1-dtcccc@linux.alibaba.com Link: https://lkml.kernel.org/r/20220307074516.6920-2-dtcccc@linux.alibaba.com Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
tangmeng
|
56eb8e9416 |
mm/kfence: remove unnecessary CONFIG_KFENCE option
In mm/Makefile has: obj-$(CONFIG_KFENCE) += kfence/ So that we don't need 'obj-$(CONFIG_KFENCE) :=' in mm/kfence/Makefile, delete it from mm/kfence/Makefile. Link: https://lkml.kernel.org/r/20220221065525.21344-1-tangmeng@uniontech.com Signed-off-by: tangmeng <tangmeng@uniontech.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Peng Liu
|
8913c61001 |
kfence: make test case compatible with run time set sample interval
The parameter kfence_sample_interval can be set via boot parameter and late shell command, which is convenient for automated tests and KFENCE parameter optimization. However, KFENCE test case just uses compile-time CONFIG_KFENCE_SAMPLE_INTERVAL, which will make KFENCE test case not run as users desired. Export kfence_sample_interval, so that KFENCE test case can use run-time-set sample interval. Link: https://lkml.kernel.org/r/20220207034432.185532-1-liupeng256@huawei.com Signed-off-by: Peng Liu <liupeng256@huawei.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Christian Knig <christian.koenig@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
ca1a46d6f5 |
Merge tag 'slab-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka: - Separate struct slab from struct page - an offshot of the page folio work. Struct page fields used by slab allocators are moved from struct page to a new struct slab, that uses the same physical storage. Similar to struct folio, it always is a head page. This brings better type safety, separation of large kmalloc allocations from true slabs, and cleanup of related objcg code. - A SLAB_MERGE_DEFAULT config optimization. * tag 'slab-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (33 commits) mm/slob: Remove unnecessary page_mapcount_reset() function call bootmem: Use page->index instead of page->freelist zsmalloc: Stop using slab fields in struct page mm/slub: Define struct slab fields for CONFIG_SLUB_CPU_PARTIAL only when enabled mm/slub: Simplify struct slab slabs field definition mm/sl*b: Differentiate struct slab fields by sl*b implementations mm/kfence: Convert kfence_guarded_alloc() to struct slab mm/kasan: Convert to struct folio and struct slab mm/slob: Convert SLOB to use struct slab and struct folio mm/memcg: Convert slab objcgs from struct page to struct slab mm: Convert struct page to struct slab in functions used by other subsystems mm/slab: Finish struct page to struct slab conversion mm/slab: Convert most struct page to struct slab by spatch mm/slab: Convert kmem_getpages() and kmem_freepages() to struct slab mm/slub: Finish struct page to struct slab conversion mm/slub: Convert most struct page to struct slab by spatch mm/slub: Convert pfmemalloc_match() to take a struct slab mm/slub: Convert __free_slab() to use struct slab mm/slub: Convert alloc_slab_page() to return a struct slab mm/slub: Convert print_page_info() to print_slab_info() ... |
||
Vlastimil Babka
|
401fb12c68 |
mm/sl*b: Differentiate struct slab fields by sl*b implementations
With a struct slab definition separate from struct page, we can go further and define only fields that the chosen sl*b implementation uses. This means everything between __page_flags and __page_refcount placeholders now depends on the chosen CONFIG_SL*B. Some fields exist in all implementations (slab_list) but can be part of a union in some, so it's simpler to repeat them than complicate the definition with ifdefs even more. The patch doesn't change physical offsets of the fields, although it could be done later - for example it's now clear that tighter packing in SLOB could be possible. This should also prevent accidental use of fields that don't exist in given implementation. Before this patch virt_to_cache() and cache_from_obj() were visible for SLOB (albeit not used), although they rely on the slab_cache field that isn't set by SLOB. With this patch it's now a compile error, so these functions are now hidden behind an #ifndef CONFIG_SLOB. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Roman Gushchin <guro@fb.com> Tested-by: Marco Elver <elver@google.com> # kfence Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <kasan-dev@googlegroups.com> |
||
|
Vlastimil Babka
|
8dae0cfed5 |
mm/kfence: Convert kfence_guarded_alloc() to struct slab
The function sets some fields that are being moved from struct page to struct slab so it needs to be converted. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <kasan-dev@googlegroups.com> |
||
|
Vlastimil Babka
|
40f3bf0cb0 |
mm: Convert struct page to struct slab in functions used by other subsystems
KASAN, KFENCE and memcg interact with SLAB or SLUB internals through
functions nearest_obj(), obj_to_index() and objs_per_slab() that use
struct page as parameter. This patch converts it to struct slab
including all callers, through a coccinelle semantic patch.
// Options: --include-headers --no-includes --smpl-spacing include/linux/slab_def.h include/linux/slub_def.h mm/slab.h mm/kasan/*.c mm/kfence/kfence_test.c mm/memcontrol.c mm/slab.c mm/slub.c
// Note: needs coccinelle 1.1.1 to avoid breaking whitespace
@@
@@
-objs_per_slab_page(
+objs_per_slab(
...
)
{ ... }
@@
@@
-objs_per_slab_page(
+objs_per_slab(
...
)
@@
identifier fn =~ "obj_to_index|objs_per_slab";
@@
fn(...,
- const struct page *page
+ const struct slab *slab
,...)
{
<...
(
- page_address(page)
+ slab_address(slab)
|
- page
+ slab
)
...>
}
@@
identifier fn =~ "nearest_obj";
@@
fn(...,
- struct page *page
+ const struct slab *slab
,...)
{
<...
(
- page_address(page)
+ slab_address(slab)
|
- page
+ slab
)
...>
}
@@
identifier fn =~ "nearest_obj|obj_to_index|objs_per_slab";
expression E;
@@
fn(...,
(
- slab_page(E)
+ E
|
- virt_to_page(E)
+ virt_to_slab(E)
|
- virt_to_head_page(E)
+ virt_to_slab(E)
|
- page
+ page_slab(page)
)
,...)
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <kasan-dev@googlegroups.com>
Cc: <cgroups@vger.kernel.org>
|
||
Baokun Li
|
0129ab1f26 |
kfence: fix memory leak when cat kfence objects
Hulk robot reported a kmemleak problem:
unreferenced object 0xffff93d1d8cc02e8 (size 248):
comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s)
hex dump (first 32 bytes):
00 40 85 19 d4 93 ff ff 00 10 00 00 00 00 00 00 .@..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
seq_open+0x2a/0x80
full_proxy_open+0x167/0x1e0
do_dentry_open+0x1e1/0x3a0
path_openat+0x961/0xa20
do_filp_open+0xae/0x120
do_sys_openat2+0x216/0x2f0
do_sys_open+0x57/0x80
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff93d419854000 (size 4096):
comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s)
hex dump (first 32 bytes):
6b 66 65 6e 63 65 2d 23 32 35 30 3a 20 30 78 30 kfence-#250: 0x0
30 30 30 30 30 30 30 37 35 34 62 64 61 31 32 2d 0000000754bda12-
backtrace:
seq_read_iter+0x313/0x440
seq_read+0x14b/0x1a0
full_proxy_read+0x56/0x80
vfs_read+0xa5/0x1b0
ksys_read+0xa0/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
I find that we can easily reproduce this problem with the following
commands:
cat /sys/kernel/debug/kfence/objects
echo scan > /sys/kernel/debug/kmemleak
cat /sys/kernel/debug/kmemleak
The leaked memory is allocated in the stack below:
do_syscall_64
do_sys_open
do_dentry_open
full_proxy_open
seq_open ---> alloc seq_file
vfs_read
full_proxy_read
seq_read
seq_read_iter
traverse ---> alloc seq_buf
And it should have been released in the following process:
do_syscall_64
syscall_exit_to_user_mode
exit_to_user_mode_prepare
task_work_run
____fput
__fput
full_proxy_release ---> free here
However, the release function corresponding to file_operations is not
implemented in kfence. As a result, a memory leak occurs. Therefore,
the solution to this problem is to implement the corresponding release
function.
Link: https://lkml.kernel.org/r/20211206133628.2822545-1-libaokun1@huawei.com
Fixes:
|