The keyring and auth functions can be called from both the host and
the target side and are controlled by Kconfig options for each of the
combinations, but the declarations are controlled by #ifdef checks
on the shared Kconfig symbols.
This leads to link failures in combinations where one of the frontends
is built-in and the other one is a module, and the keyring code
ends up in a module that is not reachable from the builtin code:
ld: drivers/nvme/host/core.o: in function `nvme_core_exit':
core.c:(.exit.text+0x4): undefined reference to `nvme_keyring_exit'
ld: drivers/nvme/host/core.o: in function `nvme_core_init':
core.c:(.init.text+0x94): undefined reference to `nvme_keyring_init
ld: drivers/nvme/host/tcp.o: in function `nvme_tcp_setup_ctrl':
tcp.c:(.text+0x4c18): undefined reference to `nvme_tls_psk_default'
Address this by moving nvme_keyring_init()/nvme_keyring_exit() into
module init/exit functions for the keyring module.
Fixes: be8e82caa6 ("nvme-tcp: enable TLS handshake upcall")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When only the keyring module is included but auth is not, modpost
complains about the lack of a module license tag:
ERROR: modpost: missing MODULE_LICENSE() in drivers/nvme/common/nvme-common.o
Address this by making both modules buildable standalone,
removing the now unnecessary CONFIG_NVME_COMMON symbol
in the process.
Also, now that NVME_KEYRING config symbol can be either a module or
built-in, the stubs need to check for '#if IS_ENABLED' rather than a
simple '#ifdef'.
Fixes: 9d77eb5277 ("nvme-keyring: register '.nvme' keyring")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Setting up I/O queues might take quite some time on larger and/or
busy setups, so KATO might expire before all I/O queues could be
set up.
Fix this by start keep alive from the ->init_ctrl_finish() callback,
and stopping it when calling nvme_cancel_admin_tagset().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Mark O'Donovan <shiftee@posteo.net>
[fixed nvme-fc compile error]
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_tcp_setup_ctrl() has an open-coded version of
nvme_tcp_teardown_admin_queue().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Mark O'Donovan <shiftee@posteo.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently a seqnum of zero is sent during uni-directional
authentication. The zero value is reserved for the secure channel
feature which is not yet implemented.
Relevant extract from the spec:
The value 0h is used to indicate that bidirectional authentication
is not performed, but a challenge value C2 is carried in order to
generate a pre-shared key (PSK) for subsequent establishment of a
secure channel
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Introduces an explicit variable for bi-directional auth.
The currently used variable chap->s2 is incorrectly zeroed for
uni-directional auth. That will be fixed in the next patch so this
needs to change to avoid sending unexpected success2 messages
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
In cases where RVALID is false, the response is still transmitted,
but is cleared to zero.
Relevant extract from the spec:
Response R2, if valid (i.e., if the RVALID field is set to 01h),
cleared to 0h otherwise
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Driver may return an error before submitting the command to the device.
Ensure that such error is propagated up.
Fixes: 456cba386e ("nvme: wire-up uring-cmd support for io-passthru on char-device.")
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The firmware version sysfs entry needs to be updated after a successfully
firmware activation.
nvme-cli stopped issuing an Identify Controller command to list the
current firmware information and relies on sysfs showing the current
firmware version.
Reported-by: Kenji Tomonaga <tkenbo@gmail.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Kenji Tomonaga <tkenbo@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
[fixed off-by one afi index]
Signed-off-by: Keith Busch <kbusch@kernel.org>
All error handling path end to the error handling path, except this one.
Go to the error handling branch as well here, otherwise 'icreq' and
'icresp' will leak.
Fixes: 2837966ab2 ("nvme-tcp: control message handling for recvmsg()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Pull block updates from Jens Axboe:
- Improvements to the queue_rqs() support, and adding null_blk support
for that as well (Chengming)
- Series improving badblocks support (Coly)
- Key store support for sed-opal (Greg)
- IBM partition string handling improvements (Jan)
- Make number of ublk devices supported configurable (Mike)
- Cancelation improvements for ublk (Ming)
- MD pull requests via Song:
- Handle timeout in md-cluster, by Denis Plotnikov
- Cleanup pers->prepare_suspend, by Yu Kuai
- Rewrite mddev_suspend(), by Yu Kuai
- Simplify md_seq_ops, by Yu Kuai
- Reduce unnecessary locking array_state_store(), by Mariusz
Tkaczyk
- Make rdev add/remove independent from daemon thread, by Yu Kuai
- Refactor code around quiesce() and mddev_suspend(), by Yu Kuai
- NVMe pull request via Keith:
- nvme-auth updates (Mark)
- nvme-tcp tls (Hannes)
- nvme-fc annotaions (Kees)
- Misc cleanups and improvements (Jiapeng, Joel)
* tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux: (95 commits)
block: ublk_drv: Remove unused function
md: cleanup pers->prepare_suspend()
nvme-auth: allow mixing of secret and hash lengths
nvme-auth: use transformed key size to create resp
nvme-auth: alloc nvme_dhchap_key as single buffer
nvmet-tcp: use 'spin_lock_bh' for state_lock()
powerpc/pseries: PLPKS SED Opal keystore support
block: sed-opal: keystore access for SED Opal keys
block:sed-opal: SED Opal keystore
ublk: simplify aborting request
ublk: replace monitor with cancelable uring_cmd
ublk: quiesce request queue when aborting queue
ublk: rename mm_lock as lock
ublk: move ublk_cancel_dev() out of ub->mutex
ublk: make sure io cmd handled in submitter task context
ublk: don't get ublk device reference in ublk_abort_queue()
ublk: Make ublks_max configurable
ublk: Limit dev_id/ub_number values
md-cluster: check for timeout while a new disk adding
nvme: rework NVME_AUTH Kconfig selection
...
User can request more metadata bytes than the device will write. Ensure
kernel buffer is initialized so we're not leaking unsanitized memory on
the copy-out.
Fixes: 0b7f1f26f9 ("nvme: use the block layer for userspace passthrough metadata")
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This does not change current behaviour as the driver currently
verifies that the secret size is the same size as the length of
the transformation hash.
Co-developed-by: Akash Appaiah <Akash.Appaiah@dell.com>
Signed-off-by: Akash Appaiah <Akash.Appaiah@dell.com>
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Having a single Kconfig symbol NVME_AUTH conflates the selection
of the authentication functions from nvme/common and nvme/host,
causing kbuild robot to complain when building the nvme target
only. So introduce a Kconfig symbol NVME_HOST_AUTH for the nvme
host bits and use NVME_AUTH for the common functions only.
And move the CRYPTO selection into nvme/common to make it
easier to read.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310120733.TlPOVeJm-lkp@intel.com/
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Parse the fabrics options 'keyring' and 'tls_key' and store the
referenced keys in the options structure.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When icreq/icresp fails we should be printing out a warning to
inform the user that the connection could not be established;
without it there won't be anything in the kernel message log,
just an error code returned to nvme-cli.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
kTLS is sending TLS ALERT messages as control messages for recvmsg().
As we can't do anything sensible with it just abort the connection
and let the userspace agent to a re-negotiation.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add a fabrics option 'tls' and start the TLS handshake upcall
with the default PSK. When TLS is started the PSK key serial
number is displayed in the sysfs attribute 'tls_key'
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When using the TLS upcall we need to allocate a socket file such
that the userspace daemon is able to use the socket.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Register a '.nvme' keyring to hold keys for TLS and DH-HMAC-CHAP and
add a new config option NVME_KEYRING.
We need a separate keyring for NVMe as the configuration is done
via individual commands (eg for configfs), and the usual per-session
or per-process keyrings can't be used.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Commit 546dea18c9 ("nvme-auth: check chap ctrl_key once constructed")
replaced the condition "if (ctrl->ctrl_key)" (indicating bidirectional
auth) by "if (chap->ctrl_key)", because ctrl->ctrl_key is a resource shared
with sysfs. But chap->ctrl_key is set in
nvme_auth_process_dhchap_challenge() depending on the DHVLEN in the
DH-HMAC-CHAP Challenge message received from the controller, and will thus
be non-NULL for every DH-HMAC-CHAP exchange, even if unidirectional auth
was requested. This will lead to a protocol violation by sending a Success2
message in the unidirectional case (per NVMe base spec 2.0, the
authentication transaction ends after the Success1 message for
unidirectional auth). Use chap->s2 instead, which is non-zero if and only
if the host requested bi-directional authentication from the controller.
Fixes: 546dea18c9 ("nvme-auth: check chap ctrl_key once constructed")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Trying to stop a queue which hasn't been allocated will result
in a warning due to calling mutex_lock() against an uninitialized mutex.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 4 PID: 104150 at kernel/locking/mutex.c:579
Call trace:
RIP: 0010:__mutex_lock+0x1173/0x14a0
nvme_rdma_stop_queue+0x1b/0xa0 [nvme_rdma]
nvme_rdma_teardown_io_queues.part.0+0xb0/0x1d0 [nvme_rdma]
nvme_rdma_delete_ctrl+0x50/0x100 [nvme_rdma]
nvme_do_delete_ctrl+0x149/0x158 [nvme_core]
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Now we update driver tags request table in blk_mq_get_driver_tag(),
so the driver that support queue_rqs() have to update that inflight
table by itself.
Move it to blk_mq_start_request(), which is a better place where
we setup the deadline for request timeout check. And it's just
where the request becomes inflight.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230913151616.3164338-5-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.6
- nvme-tcp iov len fix (Varun)
- nvme-hwmon const qualifier for safety (Krzysztof)
- nvme-fc null pointer checks (Nigel)
- nvme-pci no numa node fix (Pratyush)
- nvme timeout fix for non-compliant controllers (Keith)"
* tag 'nvme-6.6-2023-09-14' of git://git.infradead.org/nvme:
nvme: avoid bogus CRTO values
nvme-pci: do not set the NUMA node of device if it has none
nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid()
nvme: host: hwmon: constify pointers to hwmon_channel_info
nvmet-tcp: pass iov_len instead of sg->length to bvec_set_page()
Some devices are reporting controller ready mode support, but return 0
for CRTO. These devices require a much higher time to ready than that,
so they are failing to initialize after the driver starter preferring
that value over CAP.TO.
The spec requires that CAP.TO match the appropritate CRTO value, or be
set to 0xff if CRTO is larger than that. This means that CAP.TO can be
used to validate if CRTO is reliable, and provides an appropriate
fallback for setting the timeout value if not. Use whichever is larger.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217863
Reported-by: Cláudio Sampaio <patola@gmail.com>
Reported-by: Felix Yan <felixonmars@archlinux.org>
Tested-by: Felix Yan <felixonmars@archlinux.org>
Based-on-a-patch-by: Felix Yan <felixonmars@archlinux.org>
Cc: stable@vger.kernel.org
Signed-off-by: Keith Busch <kbusch@kernel.org>
If a device has no NUMA node information associated with it, the driver
puts the device in node first_memory_node (say node 0). Not having a
NUMA node and being associated with node 0 are completely different
things and it makes little sense to mix the two.
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Pull block updates from Jens Axboe:
"Pretty quiet round for this release. This contains:
- Add support for zoned storage to ublk (Andreas, Ming)
- Series improving performance for drivers that mark themselves as
needing a blocking context for issue (Bart)
- Cleanup the flush logic (Chengming)
- sed opal keyring support (Greg)
- Fixes and improvements to the integrity support (Jinyoung)
- Add some exports for bcachefs that we can hopefully delete again in
the future (Kent)
- deadline throttling fix (Zhiguo)
- Series allowing building the kernel without buffer_head support
(Christoph)
- Sanitize the bio page adding flow (Christoph)
- Write back cache fixes (Christoph)
- MD updates via Song:
- Fix perf regression for raid0 large sequential writes (Jan)
- Fix split bio iostat for raid0 (David)
- Various raid1 fixes (Heinz, Xueshi)
- raid6test build fixes (WANG)
- Deprecate bitmap file support (Christoph)
- Fix deadlock with md sync thread (Yu)
- Refactor md io accounting (Yu)
- Various non-urgent fixes (Li, Yu, Jack)
- Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li,
Ming, Nitesh, Ruan, Tejun, Thomas, Xu)"
* tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits)
block: use strscpy() to instead of strncpy()
block: sed-opal: keyring support for SED keys
block: sed-opal: Implement IOC_OPAL_REVERT_LSP
block: sed-opal: Implement IOC_OPAL_DISCOVERY
blk-mq: prealloc tags when increase tagset nr_hw_queues
blk-mq: delete redundant tagset map update when fallback
blk-mq: fix tags leak when shrink nr_hw_queues
ublk: zoned: support REQ_OP_ZONE_RESET_ALL
md: raid0: account for split bio in iostat accounting
md/raid0: Fix performance regression for large sequential writes
md/raid0: Factor out helper for mapping and submitting a bio
md raid1: allow writebehind to work on any leg device set WriteMostly
md/raid1: hold the barrier until handle_read_error() finishes
md/raid1: free the r1bio before waiting for blocked rdev
md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
drivers/rnbd: restore sysfs interface to rnbd-client
md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
raid6: test: only check for Altivec if building on powerpc hosts
raid6: test: make sure all intermediate and artifact files are .gitignored
...
The nvme_fc_fcp_op structure describing an AEN operation is initialized with a
null request structure pointer. An FC LLDD may make a call to
nvme_fc_io_getuuid passing a pointer to an nvmefc_fcp_req for an AEN operation.
Add validation of the request structure pointer before dereference.
Signed-off-by: Nigel Kirkland <nkirkland2304@gmail.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fixes for request_queue state (Ming)
- Another uuid quirk (August)
- RCU poll fix for NVMe (Ming)
- Fix for an IO stall with polled IO (me)
- Fix for blk-iocost stats enable/disable accounting (Chengming)
- Regression fix for large pages for zram (Christoph)
* tag 'block-6.5-2023-08-11' of git://git.kernel.dk/linux:
nvme: core: don't hold rcu read lock in nvme_ns_chr_uring_cmd_iopoll
blk-iocost: fix queue stats accounting
block: don't make REQ_POLLED imply REQ_NOWAIT
block: get rid of unused plug->nowait flag
zram: take device and not only bvec offset into account
nvme-pci: add NVME_QUIRK_BOGUS_NID for Samsung PM9B1 256G and 512G
nvme-rdma: fix potential unbalanced freeze & unfreeze
nvme-tcp: fix potential unbalanced freeze & unfreeze
nvme: fix possible hang when removing a controller during error recovery
Now nvme_ns_chr_uring_cmd_iopoll() has switched to request based io
polling, and the associated NS is guaranteed to be live in case of
io polling, so request is guaranteed to be valid because blk-mq uses
pre-allocated request pool.
Remove the rcu read lock in nvme_ns_chr_uring_cmd_iopoll(), which
isn't needed any more after switching to request based io polling.
Fix "BUG: sleeping function called from invalid context" because
set_page_dirty_lock() from blk_rq_unmap_user() may sleep.
Fixes: 585079b6e4 ("nvme: wire up async polling for io passthrough commands")
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Cc: Kanchan Joshi <joshi.k@samsung.com>
Cc: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Link: https://lore.kernel.org/r/20230809020440.174682-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The Samsung PM9B1 512G SSD found in some Lenovo Yoga 7 14ARB7 laptop units
reports eui as 0001000200030004 when resuming from s2idle, causing the
device to be removed with this error in dmesg:
nvme nvme0: identifiers changed for nsid 1
To fix this, add a quirk to ignore namespace identifiers for this device.
Signed-off-by: August Wikerfors <git@augustwikerfors.se>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Move start_freeze into nvme_rdma_configure_io_queues(), and there is
at least two benefits:
1) fix unbalanced freeze and unfreeze, since re-connection work may
fail or be broken by removal
2) IO during error recovery can be failfast quickly because nvme fabrics
unquiesces queues after teardown.
One side-effect is that !mpath request may timeout during connecting
because of queue topo change, but that looks not one big deal:
1) same problem exists with current code base
2) compared with !mpath, mpath use case is dominant
Fixes: 9f98772ba3 ("nvme-rdma: fix controller reset hang during traffic")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Move start_freeze into nvme_tcp_configure_io_queues(), and there is
at least two benefits:
1) fix unbalanced freeze and unfreeze, since re-connection work may
fail or be broken by removal
2) IO during error recovery can be failfast quickly because nvme fabrics
unquiesces queues after teardown.
One side-effect is that !mpath request may timeout during connecting
because of queue topo change, but that looks not one big deal:
1) same problem exists with current code base
2) compared with !mpath, mpath use case is dominant
Fixes: 2875b0aeca ("nvme-tcp: fix controller reset hang during traffic")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Pull SCSI fixes from James Bottomley:
"This is a bunch of small driver fixes and a larger rework of zone disk
handling (which reaches into blk and nvme).
The aacraid array-bounds fix is now critical since the security people
turned on -Werror for some build tests, which now fail without it"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: storvsc: Handle SRB status value 0x30
scsi: block: Improve checks in blk_revalidate_disk_zones()
scsi: block: virtio_blk: Set zone limits before revalidating zones
scsi: block: nullblk: Set zone limits before revalidating zones
scsi: nvme: zns: Set zone limits before revalidating zones
scsi: sd_zbc: Set zone limits before revalidating zones
scsi: ufs: core: Add support for qTimestamp attribute
scsi: aacraid: Avoid -Warray-bounds warning
scsi: ufs: ufs-mediatek: Add dependency for RESET_CONTROLLER
scsi: ufs: core: Update contact email for monitor sysfs nodes
scsi: scsi_debug: Remove dead code
scsi: qla2xxx: Use vmalloc_array() and vcalloc()
scsi: fnic: Use vmalloc_array() and vcalloc()
scsi: qla2xxx: Fix error code in qla2x00_start_sp()
scsi: qla2xxx: Silence a static checker warning
scsi: lpfc: Fix a possible data race in lpfc_unregister_fcf_rescan()
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Don't require quirk to use duplicate namespace identifiers
(Christoph, Sagi)
- One more BOGUS_NID quirk (Pankaj)
- IO timeout and error hanlding fixes for PCI (Keith)
- Enhanced metadata format mask fix (Ankit)
- Association race condition fix for fibre channel (Michael)
- Correct debugfs error checks (Minjie)
- Use PAGE_SECTORS_SHIFT where needed (Damien)
- Reduce kernel logs for legacy nguid attribute (Keith)
- Use correct dma direction when unmapping metadata (Ming)
- Fix for a flush handling regression in this release (Christoph)
- Fix for batched request time stamping (Chengming)
- Fix for a regression in the mq-deadline position calculation (Bart)
- Lockdep fix for blk-crypto (Eric)
- Fix for a regression in the Amiga partition handling changes
(Michael)
* tag 'block-6.5-2023-07-14' of git://git.kernel.dk/linux:
block: queue data commands from the flush state machine at the head
blk-mq: fix start_time_ns and alloc_time_ns for pre-allocated rq
nvme-pci: fix DMA direction of unmapping integrity data
nvme: don't reject probe due to duplicate IDs for single-ported PCIe devices
block/mq-deadline: Fix a bug in deadline_from_pos()
nvme: ensure disabling pairs with unquiesce
nvme-fc: fix race between error recovery and creating association
nvme-fc: return non-zero status code when fails to create association
nvme: fix parameter check in nvme_fault_inject_init()
nvme: warn only once for legacy uuid attribute
block: remove dead struc request->completion_data field
nvme: fix the NVME_ID_NS_NVM_STS_MASK definition
nvmet: use PAGE_SECTORS_SHIFT
nvme: add BOGUS_NID quirk for Samsung SM953
blk-crypto: use dynamic lock class for blk_crypto_profile::lock
block/partition: fix signedness issue for Amiga partitions
DMA direction should be taken in dma_unmap_page() for unmapping integrity
data.
Fix this DMA direction, and reported in Guangwu's test.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Fixes: 4aedb70543 ("nvme-pci: split metadata handling from nvme_map_data / nvme_unmap_data")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
While duplicate IDs are still very harmful, including the potential to easily
see changing devices in /dev/disk/by-id, it turn out they are extremely
common for cheap end user NVMe devices.
Relax our check for them for so that it doesn't reject the probe on
single-ported PCIe devices, but prints a big warning instead. In doubt
we'd still like to see quirk entries to disable the potential for
changing supposed stable device identifier links, but this will at least
allow users how have two (or more) of these devices to use them without
having to manually add a new PCI ID entry with the quirk through sysfs or
by patching the kernel.
Fixes: 2079f41ec6 ("nvme: check that EUI/GUID/UUID are globally unique")
Cc: stable@vger.kernel.org # 6.0+
Co-developed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
If any error handling that disables the controller fails to queue the
reset work, like if the state changed to disconnected inbetween, then
the failed teardown needs to unquiesce the queues since it's no longer
paired with reset_work. Just make sure that the controller can be put
into a resetting state prior to starting the disable so that no other
handling can change the queue states while recovery is happening.
Reported-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
There is a small race window between nvme-fc association creation and error
recovery. Fix this race condition by protecting accessing to controller
state and ASSOC_FAILED flag under nvme-fc controller lock.
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Make IS_ERR() judge the debugfs_create_dir() function return.
Signed-off-by: Minjie Du <duminjie@vivo.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Report the legacy fallback behavior for uuid attributes just once
instead of logging repeated warnings for the same condition every time
the attribute is read. The old behavior is too spamy on the kernel logs.
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In nvme_revalidate_zones(), execute blk_queue_chunk_sectors() and
blk_queue_max_zone_append_sectors() to respectively set a ZNS namespace
zone size and maximum zone append sector limit before executing
blk_revalidate_disk_zones(). This is to allow the block layer zone
reavlidation to check these device characteristics prior to checking all
zones of the device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230703024812.76778-3-dlemoal@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and wireguard.
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind"
* tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
nfp: clean mc addresses in application firmware when closing port
selftests: mptcp: pm_nl_ctl: fix 32-bit support
selftests: mptcp: depend on SYN_COOKIES
selftests: mptcp: userspace_pm: report errors with 'remove' tests
selftests: mptcp: userspace_pm: use correct server port
selftests: mptcp: sockopt: return error if wrong mark
selftests: mptcp: sockopt: use 'iptables-legacy' if available
selftests: mptcp: connect: fail if nft supposed to work
mptcp: do not rely on implicit state check in mptcp_listen()
mptcp: ensure subflow is unhashed before cleaning the backlog
s390/qeth: Fix vipa deletion
octeontx-af: fix hardware timestamp configuration
net: dsa: sja1105: always enable the send_meta options
net: dsa: tag_sja1105: fix MAC DA patching from meta frames
net: Replace strlcpy with strscpy
pptp: Fix fib lookup calls.
mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check
net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
xsk: Honor SO_BINDTODEVICE on bind
ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported
...
