In preparation for the buddy hardlockup detector where the CPU checking
for lockup might not be the currently running CPU, add a "cpu" parameter
to watchdog_hardlockup_check().
As part of this change, make hrtimer_interrupts an atomic_t since now the
CPU incrementing the value and the CPU reading the value might be
different. Technially this could also be done with just READ_ONCE and
WRITE_ONCE, but atomic_t feels a little cleaner in this case.
While hrtimer_interrupts is made atomic_t, we change
hrtimer_interrupts_saved from "unsigned long" to "int". The "int" is
needed to match the data type backing atomic_t for hrtimer_interrupts.
Even if this changes us from 64-bits to 32-bits (which I don't think is
true for most compilers), it doesn't really matter. All we ever do is
increment it every few seconds and compare it to an old value so 32-bits
is fine (even 16-bits would be). The "signed" vs "unsigned" also doesn't
matter for simple equality comparisons.
hrtimer_interrupts_saved is _not_ switched to atomic_t nor even accessed
with READ_ONCE / WRITE_ONCE. The hrtimer_interrupts_saved is always
consistently accessed with the same CPU. NOTE: with the upcoming "buddy"
detector there is one special case. When a CPU goes offline/online then
we can change which CPU is the one to consistently access a given instance
of hrtimer_interrupts_saved. We still can't end up with a partially
updated hrtimer_interrupts_saved, however, because we end up petting all
affected CPUs to make sure the new and old CPU can't end up somehow
read/write hrtimer_interrupts_saved at the same time.
Link: https://lkml.kernel.org/r/20230519101840.v5.10.I3a7d4dd8c23ac30ee0b607d77feb6646b64825c0@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Colin Cross <ccross@android.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The perf hardlockup detector works by looking at interrupt counts and
seeing if they change from run to run. The interrupt counts are managed
by the common watchdog code via its watchdog_timer_fn().
Currently the API between the perf detector and the common code is a
function: is_hardlockup(). When the hard lockup detector sees that
function return true then it handles printing out debug info and inducing
a panic if necessary.
Let's change the API a little bit in preparation for the buddy hardlockup
detector. The buddy hardlockup detector wants to print nearly the same
debug info and have nearly the same panic behavior. That means we want to
move all that code to the common file. For now, the code in the common
file will only be there if the perf hardlockup detector is enabled, but
eventually it will be selected by a common config.
Right now, this _just_ moves the code from the perf detector file to the
common file and changes the names. It doesn't make the changes that the
buddy hardlockup detector will need and doesn't do any style cleanups. A
future patch will do cleanup to make it more obvious what changed.
With the above, we no longer have any callers of is_hardlockup() outside
of the "watchdog.c" file, so we can remove it from the header, make it
static, and move it to the same "#ifdef" block as our new
watchdog_hardlockup_check(). While doing this, it can be noted that even
if no hardlockup detectors were configured the existing code used to still
have the code for counting/checking "hrtimer_interrupts" even if the perf
hardlockup detector wasn't configured. We didn't need to do that, so move
all the "hrtimer_interrupts" counting to only be there if the perf
hardlockup detector is configured as well.
This change is expected to be a no-op.
Link: https://lkml.kernel.org/r/20230519101840.v5.8.Id4133d3183e798122dc3b6205e7852601f289071@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Colin Cross <ccross@android.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A number of internal functions in kcov are only called from generated code
and don't technically need a declaration, but 'make W=1' warns about
global symbols without a prototype:
kernel/kcov.c:199:14: error: no previous prototype for '__sanitizer_cov_trace_pc' [-Werror=missing-prototypes]
kernel/kcov.c:264:14: error: no previous prototype for '__sanitizer_cov_trace_cmp1' [-Werror=missing-prototypes]
kernel/kcov.c:270:14: error: no previous prototype for '__sanitizer_cov_trace_cmp2' [-Werror=missing-prototypes]
kernel/kcov.c:276:14: error: no previous prototype for '__sanitizer_cov_trace_cmp4' [-Werror=missing-prototypes]
kernel/kcov.c:282:14: error: no previous prototype for '__sanitizer_cov_trace_cmp8' [-Werror=missing-prototypes]
kernel/kcov.c:288:14: error: no previous prototype for '__sanitizer_cov_trace_const_cmp1' [-Werror=missing-prototypes]
kernel/kcov.c:295:14: error: no previous prototype for '__sanitizer_cov_trace_const_cmp2' [-Werror=missing-prototypes]
kernel/kcov.c:302:14: error: no previous prototype for '__sanitizer_cov_trace_const_cmp4' [-Werror=missing-prototypes]
kernel/kcov.c:309:14: error: no previous prototype for '__sanitizer_cov_trace_const_cmp8' [-Werror=missing-prototypes]
kernel/kcov.c:316:14: error: no previous prototype for '__sanitizer_cov_trace_switch' [-Werror=missing-prototypes]
Adding prototypes for these in a header solves that problem, but now there
is a mismatch between the built-in type and the prototype on 64-bit
architectures because they expect some functions to take a 64-bit
'unsigned long' argument rather than an 'unsigned long long' u64 type:
include/linux/kcov.h:84:6: error: conflicting types for built-in function '__sanitizer_cov_trace_switch'; expected 'void(long long unsigned int, void *)' [-Werror=builtin-declaration-mismatch]
84 | void __sanitizer_cov_trace_switch(u64 val, u64 *cases);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avoid this as well with a custom type definition.
Link: https://lkml.kernel.org/r/20230517124944.929997-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit f1c1a9ee00 ("fork: Move memcg_charge_kernel_stack()
into CONFIG_VMAP_STACK"), memcg_charge_kernel_stack() has been moved
into CONFIG_VMAP_STACK block, so the CONFIG_VMAP_STACK check can be
removed.
Furthermore, memcg_charge_kernel_stack() is only invoked by
alloc_thread_stack_node() instead of dup_task_struct(). If
memcg_kmem_charge_page() fails, the uncharge process is handled in
memcg_charge_kernel_stack() itself instead of free_thread_stack(),
so remove the incorrect comments.
If memcg_charge_kernel_stack() fails to charge pages used by kernel
stack, only charged pages need to be uncharged. It's unnecessary to
uncharge those pages which memory cgroup pointer is NULL.
[akpm@linux-foundation.org: remove assertion that PAGE_SIZE is a multiple of 1k]
Link: https://lkml.kernel.org/r/20230508064458.32855-1-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull debugobjects fixes from Thomas Gleixner:
"Two fixes for debugobjects:
- Prevent the allocation path from waking up kswapd.
That's a long standing issue due to the GFP_ATOMIC allocation flag.
As debug objects can be invoked from pretty much any context waking
kswapd can end up in arbitrary lock chains versus the waitqueue
lock
- Correct the explicit lockdep wait-type violation in
debug_object_fill_pool()"
* tag 'core-debugobjects-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Don't wake up kswapd from fill_pool()
debugobjects,locking: Annotate debug_object_fill_pool() wait type violation
Pull xen fixes from Juergen Gross:
- a double free fix in the Xen pvcalls backend driver
- a fix for a regression causing the MSI related sysfs entries to not
being created in Xen PV guests
- a fix in the Xen blkfront driver for handling insane input data
better
* tag 'for-linus-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/pci/xen: populate MSI sysfs entries
xen/pvcalls-back: fix double frees with pvcalls_new_active_socket()
xen/blkfront: Only check REQ_FUA for writes
It turns out that udev under certain circumstances will concurrently try
to load the same modules over-and-over excessively. This isn't a kernel
bug, but it ends up affecting the kernel, to the point that under
certain circumstances we can fail to boot, because the kernel uses a lot
of memory to read all the module data all at once.
Note that it isn't a memory leak, it's just basically a thundering herd
problem happening at bootup with a lot of CPUs, with the worst cases
then being pretty bad.
Admittedly the worst situations are somewhat contrived: lots and lots of
CPUs, not a lot of memory, and KASAN enabled to make it all slower and
as such (unintentionally) exacerbate the problem.
Luis explains: [1]
"My best assessment of the situation is that each CPU in udev ends up
triggering a load of duplicate set of modules, not just one, but *a
lot*. Not sure what heuristics udev uses to load a set of modules per
CPU."
Petr Pavlu chimes in: [2]
"My understanding is that udev workers are forked. An initial kmod
context is created by the main udevd process but no sharing happens
after the fork. It means that the mentioned memory pool logic doesn't
really kick in.
Multiple parallel load requests come from multiple udev workers, for
instance, each handling an udev event for one CPU device and making
the exactly same requests as all others are doing at the same time.
The optimization idea would be to recognize these duplicate requests
at the udevd/kmod level and converge them"
Note that module loading has tried to mitigate this issue before, see
for example commit 064f4536d1 ("module: avoid allocation if module is
already present and ready"), which has a few ASCII graphs on memory use
due to this same issue.
However, while that noticed that the module was already loaded, and
exited with an error early before spending any more time on setting up
the module, it didn't handle the case of multiple concurrent module
loads all being active - but not complete - at the same time.
Yes, one of them will eventually win the race and finalize its copy, and
the others will then notice that the module already exists and error
out, but while this all happens, we have tons of unnecessary concurrent
work being done.
Again, the real fix is for udev to not do that (maybe it should use
threads instead of fork, and have actual shared data structures and not
cause duplicate work). That real fix is apparently not trivial.
But it turns out that the kernel already has a pretty good model for
dealing with concurrent access to the same file: the i_writecount of the
inode.
In fact, the module loading already indirectly uses 'i_writecount' ,
because 'kernel_file_read()' will in fact do
ret = deny_write_access(file);
if (ret)
return ret;
...
allow_write_access(file);
around the read of the file data. We do not allow concurrent writes to
the file, and return -ETXTBUSY if the file was open for writing at the
same time as the module data is loaded from it.
And the solution to the reader concurrency problem is to simply extend
this "no concurrent writers" logic to simply be "exclusive access".
Note that "exclusive" in this context isn't really some absolute thing:
it's only exclusion from writers and from other "special readers" that
do this writer denial. So we simply introduce a variation of that
"deny_write_access()" logic that not only denies write access, but also
requires that this is the _only_ such access that denies write access.
Which means that you can't start loading a module that is already being
loaded as a module by somebody else, or you will get the same -ETXTBSY
error that you would get if there were writers around.
[ It also means that you can't try to load a currently executing
executable as a module, for the same reason: executables do that same
"deny_write_access()" thing, and that's obviously where the whole
ETXTBSY logic traditionally came from.
This is not a problem for kernel modules, since the set of normal
executable files and kernel module files is entirely disjoint. ]
This new function is called "exclusive_deny_write_access()", and the
implementation is trivial, in that it's just an atomic decrement of
i_writecount if it was 0 before.
To use that new exclusivity check, all we then do is wrap the module
loading with that exclusive_deny_write_access()() / allow_write_access()
pair. The actual patch is a bit bigger than that, because we want to
surround not just the "load file data" part, but the whole module setup,
to get maximum exclusion.
So this ends up splitting up "finit_module()" into a few helper
functions to make it all very clear and legible.
In Luis' test-case (bringing up 255 vcpu's in a virtual machine [3]),
the "wasted vmalloc" space (ie module data read into a vmalloc'ed area
in order to be loaded as a module, but then discarded because somebody
else loaded the same module instead) dropped from 1.8GiB to 474kB. Yes,
that's gigabytes to kilobytes.
It doesn't drop completely to zero, because even with this change, you
can still end up having completely serial pointless module loads, where
one udev process has loaded a module fully (and thus the kernel has
released that exclusive lock on the module file), and then another udev
process tries to load the same module again.
So while we cannot fully get rid of the fundamental bug in user space,
we _can_ get rid of the excessive concurrent thundering herd effect.
A couple of final side notes on this all:
- This tweak only affects the "finit_module()" system call, which gives
the kernel a file descriptor with the module data.
You can also just feed the module data as raw data from user space
with "init_module()" (note the lack of 'f' at the beginning), and
obviously for that case we do _not_ have any "exclusive read" logic.
So if you absolutely want to do things wrong in user space, and try
to load the same module multiple times, and error out only later when
the kernel ends up saying "you can't load the same module name
twice", you can still do that.
And in fact, some distros will do exactly that, because they will
uncompress the kernel module data in user space before feeding it to
the kernel (mainly because they haven't started using the new kernel
side decompression yet).
So this is not some absolute "you can't do concurrent loads of the
same module". It's literally just a very simple heuristic that will
catch it early in case you try to load the exact same module file at
the same time, and in that case avoid a potentially nasty situation.
- There is another user of "deny_write_access()": the verity code that
enables fs-verity on a file (the FS_IOC_ENABLE_VERITY ioctl).
If you use fs-verity and you care about verifying the kernel modules
(which does make sense), you should do it *before* loading said
kernel module. That may sound obvious, but now the implementation
basically requires it. Because if you try to do it concurrently, the
kernel may refuse to load the module file that is being set up by the
fs-verity code.
- This all will obviously mean that if you insist on loading the same
module in parallel, only one module load will succeed, and the others
will return with an error.
That was true before too, but what is different is that the -ETXTBSY
error can be returned *before* the success case of another process
fully loading and instantiating the module.
Again, that might sound obvious, and it is indeed the whole point of
the whole change: we are much quicker to notice the whole "you're
already in the process of loading this module".
So it's very much intentional, but it does mean that if you just
spray the kernel with "finit_module()", and expect that the module is
immediately loaded afterwards without checking the return value, you
are doing something horribly horribly wrong.
I'd like to say that that would never happen, but the whole _reason_
for this commit is that udev is currently doing something horribly
horribly wrong, so ...
Link: https://lore.kernel.org/all/ZEGopJ8VAYnE7LQ2@bombadil.infradead.org/ [1]
Link: https://lore.kernel.org/all/23bd0ce6-ef78-1cd8-1f21-0e706a00424a@suse.com/ [2]
Link: https://lore.kernel.org/lkml/ZG%2Fa+nrt4%2FAAUi5z@bombadil.infradead.org/ [3]
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and bpf.
Current release - regressions:
- net: fix skb leak in __skb_tstamp_tx()
- eth: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
Current release - new code bugs:
- handshake:
- fix sock->file allocation
- fix handshake_dup() ref counting
- bluetooth:
- fix potential double free caused by hci_conn_unlink
- fix UAF in hci_conn_hash_flush
Previous releases - regressions:
- core: fix stack overflow when LRO is disabled for virtual
interfaces
- tls: fix strparser rx issues
- bpf:
- fix many sockmap/TCP related issues
- fix a memory leak in the LRU and LRU_PERCPU hash maps
- init the offload table earlier
- eth: mlx5e:
- do as little as possible in napi poll when budget is 0
- fix using eswitch mapping in nic mode
- fix deadlock in tc route query code
Previous releases - always broken:
- udplite: fix NULL pointer dereference in __sk_mem_raise_allocated()
- raw: fix output xfrm lookup wrt protocol
- smc: reset connection when trying to use SMCRv2 fails
- phy: mscc: enable VSC8501/2 RGMII RX clock
- eth: octeontx2-pf: fix TSOv6 offload
- eth: cdc_ncm: deal with too low values of dwNtbOutMaxSize"
* tag 'net-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().
net: phy: mscc: enable VSC8501/2 RGMII RX clock
net: phy: mscc: remove unnecessary phydev locking
net: phy: mscc: add support for VSC8501
net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE
net/handshake: Enable the SNI extension to work properly
net/handshake: Unpin sock->file if a handshake is cancelled
net/handshake: handshake_genl_notify() shouldn't ignore @flags
net/handshake: Fix uninitialized local variable
net/handshake: Fix handshake_dup() ref counting
net/handshake: Remove unneeded check from handshake_dup()
ipv6: Fix out-of-bounds access in ipv6_find_tlv()
net: ethernet: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
docs: netdev: document the existence of the mail bot
net: fix skb leak in __skb_tstamp_tx()
r8169: Use a raw_spinlock_t for the register locks.
page_pool: fix inconsistency for page_pool_ring_[un]lock()
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
...
Daniel Borkmann says:
====================
pull-request: bpf 2023-05-24
We've added 19 non-merge commits during the last 10 day(s) which contain
a total of 20 files changed, 738 insertions(+), 448 deletions(-).
The main changes are:
1) Batch of BPF sockmap fixes found when running against NGINX TCP tests,
from John Fastabend.
2) Fix a memleak in the LRU{,_PERCPU} hash map when bucket locking fails,
from Anton Protopopov.
3) Init the BPF offload table earlier than just late_initcall,
from Jakub Kicinski.
4) Fix ctx access mask generation for 32-bit narrow loads of 64-bit fields,
from Will Deacon.
5) Remove a now unsupported __fallthrough in BPF samples,
from Andrii Nakryiko.
6) Fix a typo in pkg-config call for building sign-file,
from Jeremy Sowden.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0
bpf, sockmap: Build helper to create connected socket pair
bpf, sockmap: Pull socket helpers out of listen test for general use
bpf, sockmap: Incorrectly handling copied_seq
bpf, sockmap: Wake up polling after data copy
bpf, sockmap: TCP data stall on recv before accept
bpf, sockmap: Handle fin correctly
bpf, sockmap: Improved check for empty queue
bpf, sockmap: Reschedule is now done through backlog
bpf, sockmap: Convert schedule_work into delayed_work
bpf, sockmap: Pass skb ownership through read_skb
bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps
bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields
samples/bpf: Drop unnecessary fallthrough
bpf: netdev: init the offload table earlier
selftests/bpf: Fix pkg-config call building sign-file
====================
Link: https://lore.kernel.org/r/20230524170839.13905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit bf5e758f02 ("genirq/msi: Simplify sysfs handling") reworked the
creation of sysfs entries for MSI IRQs. The creation used to be in
msi_domain_alloc_irqs_descs_locked after calling ops->domain_alloc_irqs.
Then it moved into __msi_domain_alloc_irqs which is an implementation of
domain_alloc_irqs. However, Xen comes with the only other implementation
of domain_alloc_irqs and hence doesn't run the sysfs population code
anymore.
Commit 6c796996ee ("x86/pci/xen: Fixup fallout from the PCI/MSI
overhaul") set the flag MSI_FLAG_DEV_SYSFS for the xen msi_domain_info
but that doesn't actually have an effect because Xen uses it's own
domain_alloc_irqs implementation.
Fix this by making use of the fallback functions for sysfs population.
Fixes: bf5e758f02 ("genirq/msi: Simplify sysfs handling")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230503131656.15928-1-mheyne@amazon.de
Signed-off-by: Juergen Gross <jgross@suse.com>
Smatch warns:
kernel/module/stats.c:394 read_file_mod_stats()
warn: passing freed memory 'buf'
We are passing 'buf' to simple_read_from_buffer() after freeing it.
Fix this by changing the order of 'simple_read_from_buffer' and 'kfree'.
Fixes: df3e764d8e ("module: add debug stats to help identify memory pressure")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The LRU and LRU_PERCPU maps allocate a new element on update before locking the
target hash table bucket. Right after that the maps try to lock the bucket.
If this fails, then maps return -EBUSY to the caller without releasing the
allocated element. This makes the element untracked: it doesn't belong to
either of free lists, and it doesn't belong to the hash table, so can't be
re-used; this eventually leads to the permanent -ENOMEM on LRU map updates,
which is unexpected. Fix this by returning the element to the local free list
if bucket locking fails.
Fixes: 20b6cc34ea ("bpf: Avoid hashtab deadlock with map_locked")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/r/20230522154558.2166815-1-aspsk@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
A narrow load from a 64-bit context field results in a 64-bit load
followed potentially by a 64-bit right-shift and then a bitwise AND
operation to extract the relevant data.
In the case of a 32-bit access, an immediate mask of 0xffffffff is used
to construct a 64-bit BPP_AND operation which then sign-extends the mask
value and effectively acts as a glorified no-op. For example:
0: 61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)
results in the following code generation for a 64-bit field:
ldr x7, [x7] // 64-bit load
mov x10, #0xffffffffffffffff
and x7, x7, x10
Fix the mask generation so that narrow loads always perform a 32-bit AND
operation:
ldr x7, [x7] // 64-bit load
mov w10, #0xffffffff
and w7, w7, w10
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Krzesimir Nowak <krzesimir@kinvolk.io>
Cc: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Fixes: 31fd85816d ("bpf: permits narrower load from bpf program context fields")
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230518102528.1341-1-will@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull probes fixes from Masami Hiramatsu:
- Initialize 'ret' local variables on fprobe_handler() to fix the
smatch warning. With this, fprobe function exit handler is not
working randomly.
- Fix to use preempt_enable/disable_notrace for rethook handler to
prevent recursive call of fprobe exit handler (which is based on
rethook)
- Fix recursive call issue on fprobe_kprobe_handler()
- Fix to detect recursive call on fprobe_exit_handler()
- Fix to make all arch-dependent rethook code notrace (the
arch-independent code is already notrace)"
* tag 'probes-fixes-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rethook, fprobe: do not trace rethook related functions
fprobe: add recursion detection in fprobe_exit_handler
fprobe: make fprobe_kprobe_handler recursion free
rethook: use preempt_{disable, enable}_notrace in rethook_trampoline_handler
tracing: fprobe: Initialize ret valiable to fix smatch error
fprobe_hander and fprobe_kprobe_handler has guarded ftrace recursion
detection but fprobe_exit_handler has not, which possibly introduce
recursive calls if the fprobe exit callback calls any traceable
functions. Checking in fprobe_hander or fprobe_kprobe_handler
is not enough and misses this case.
So add recursion free guard the same way as fprobe_hander. Since
ftrace recursion check does not employ ip(s), so here use entry_ip and
entry_parent_ip the same as fprobe_handler.
Link: https://lore.kernel.org/all/20230517034510.15639-4-zegao@tencent.com/
Fixes: 5b0ab78998 ("fprobe: Add exit_handler support")
Signed-off-by: Ze Gao <zegao@tencent.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Current implementation calls kprobe related functions before doing
ftrace recursion check in fprobe_kprobe_handler, which opens door
to kernel crash due to stack recursion if preempt_count_{add, sub}
is traceable in kprobe_busy_{begin, end}.
Things goes like this without this patch quoted from Steven:
"
fprobe_kprobe_handler() {
kprobe_busy_begin() {
preempt_disable() {
preempt_count_add() { <-- trace
fprobe_kprobe_handler() {
[ wash, rinse, repeat, CRASH!!! ]
"
By refactoring the common part out of fprobe_kprobe_handler and
fprobe_handler and call ftrace recursion detection at the very beginning,
the whole fprobe_kprobe_handler is free from recursion.
[ Fix the indentation of __fprobe_handler() parameters. ]
Link: https://lore.kernel.org/all/20230517034510.15639-3-zegao@tencent.com/
Fixes: ab51e15d53 ("fprobe: Introduce FPROBE_FL_KPROBE_SHARED flag for fprobe")
Signed-off-by: Ze Gao <zegao@tencent.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The commit 39d954200b ("fprobe: Skip exit_handler if entry_handler returns
!0") introduced a hidden dependency of 'ret' local variable in the
fprobe_handler(), Smatch warns the `ret` can be accessed without
initialization.
kernel/trace/fprobe.c:59 fprobe_handler()
error: uninitialized symbol 'ret'.
kernel/trace/fprobe.c
49 fpr->entry_ip = ip;
50 if (fp->entry_data_size)
51 entry_data = fpr->data;
52 }
53
54 if (fp->entry_handler)
55 ret = fp->entry_handler(fp, ip, ftrace_get_regs(fregs), entry_data);
ret is only initialized if there is an ->entry_handler
56
57 /* If entry_handler returns !0, nmissed is not counted. */
58 if (rh) {
rh is only true if there is an ->exit_handler. Presumably if you have
and ->exit_handler that means you also have a ->entry_handler but Smatch
is not smart enough to figure it out.
--> 59 if (ret)
^^^
Warning here.
60 rethook_recycle(rh);
61 else
62 rethook_hook(rh, ftrace_get_regs(fregs), true);
63 }
64 out:
65 ftrace_test_recursion_unlock(bit);
66 }
Link: https://lore.kernel.org/all/168100731160.79534.374827110083836722.stgit@devnote2/
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/all/85429a5c-a4b9-499e-b6c0-cbd313291c49@kili.mountain
Fixes: 39d954200b ("fprobe: Skip exit_handler if entry_handler returns !0")
Acked-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Pull locking fix from Borislav Petkov:
- Make sure __down_read_common() is always inlined so that the callers'
names land in traceevents output and thus the blocked function can be
identified
* tag 'locking_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Add __always_inline annotation to __down_read_common() and inlined callers
Pull perf fixes from Borislav Petkov:
- Make sure the PEBS buffer is flushed before reprogramming the
hardware so that the correct record sizes are used
- Update the sample size for AMD BRS events
- Fix a confusion with using the same on-stack struct with different
events in the event processing path
* tag 'perf_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG
perf/x86: Fix missing sample size update on AMD BRS
perf/core: Fix perf_sample_data not properly initialized for different swevents in perf_tp_event()
Pull scheduler fix from Borislav Petkov:
- Fix a couple of kernel-doc warnings
* tag 'sched_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: fix cid_lock kernel-doc warnings
When a tick broadcast clockevent device is initialized for one shot mode
then tick_broadcast_setup_oneshot() OR's the periodic broadcast mode
cpumask into the oneshot broadcast cpumask.
This is required when switching from periodic broadcast mode to oneshot
broadcast mode to ensure that CPUs which are waiting for periodic
broadcast are woken up on the next tick.
But it is subtly broken, when an active broadcast device is replaced and
the system is already in oneshot (NOHZ/HIGHRES) mode. Victor observed
this and debugged the issue.
Then the OR of the periodic broadcast CPU mask is wrong as the periodic
cpumask bits are sticky after tick_broadcast_enable() set it for a CPU
unless explicitly cleared via tick_broadcast_disable().
That means that this sets all other CPUs which have tick broadcasting
enabled at that point unconditionally in the oneshot broadcast mask.
If the affected CPUs were already idle and had their bits set in the
oneshot broadcast mask then this does no harm. But for non idle CPUs
which were not set this corrupts their state.
On their next invocation of tick_broadcast_enable() they observe the bit
set, which indicates that the broadcast for the CPU is already set up.
As a consequence they fail to update the broadcast event even if their
earliest expiring timer is before the actually programmed broadcast
event.
If the programmed broadcast event is far in the future, then this can
cause stalls or trigger the hung task detector.
Avoid this by telling tick_broadcast_setup_oneshot() explicitly whether
this is the initial switch over from periodic to oneshot broadcast which
must take the periodic broadcast mask into account. In the case of
initialization of a replacement device this prevents that the broadcast
oneshot mask is modified.
There is a second problem with broadcast device replacement in this
function. The broadcast device is only armed when the previous state of
the device was periodic.
That is correct for the switch from periodic broadcast mode to oneshot
broadcast mode as the underlying broadcast device could operate in
oneshot state already due to lack of periodic state in hardware. In that
case it is already armed to expire at the next tick.
For the replacement case this is wrong as the device is in shutdown
state. That means that any already pending broadcast event will not be
armed.
This went unnoticed because any CPU which goes idle will observe that
the broadcast device has an expiry time of KTIME_MAX and therefore any
CPUs next timer event will be earlier and cause a reprogramming of the
broadcast device. But that does not guarantee that the events of the
CPUs which were already in idle are delivered on time.
Fix this by arming the newly installed device for an immediate event
which will reevaluate the per CPU expiry times and reprogram the
broadcast device accordingly. This is simpler than caching the last
expiry time in yet another place or saving it before the device exchange
and handing it down to the setup function. Replacement of broadcast
devices is not a frequent operation and usually happens once somewhere
late in the boot process.
Fixes: 9c336c9935 ("tick/broadcast: Allow late registered device to enter oneshot mode")
Reported-by: Victor Hassan <victor@allwinnertech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87pm7d2z1i.ffs@tglx
Fix kernel-doc warnings for cid_lock and use_cid_lock.
These comments are not in kernel-doc format.
kernel/sched/core.c:11496: warning: Cannot understand * @cid_lock: Guarantee forward-progress of cid allocation.
on line 11496 - I thought it was a doc line
kernel/sched/core.c:11505: warning: Cannot understand * @use_cid_lock: Select cid allocation behavior: lock-free vs spinlock.
on line 11505 - I thought it was a doc line
Fixes: 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230428031111.322-1-rdunlap@infradead.org
Apparently despite it being marked inline, the compiler
may not inline __down_read_common() which makes it difficult
to identify the cause of lock contention, as the blocked
function in traceevents will always be listed as
__down_read_common().
So this patch adds __always_inline annotation to the common
function (as well as the inlined helper callers) to force it to
be inlined so the blocking function will be listed (via Wchan)
in traceevents.
Fixes: c995e638cc ("locking/rwsem: Fold __down_{read,write}*()")
Reported-by: Tim Murray <timmurray@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20230503023351.2832796-1-jstultz@google.com
Pull more tracing updates from Steven Rostedt:
- Make buffer_percent read/write.
The buffer_percent file is how users can state how long to block on
the tracing buffer depending on how much is in the buffer. When it
hits the "buffer_percent" it will wake the task waiting on the
buffer. For some reason it was set to read-only.
This was not noticed because testing was done as root without
SELinux, but with SELinux it will prevent even root to write to it
without having CAP_DAC_OVERRIDE.
- The "touched_functions" was added this merge window, but one of the
reasons for adding it was not implemented.
That was to show what functions were not only touched, but had either
a direct trampoline attached to it, or a kprobe or live kernel
patching that can "hijack" the function to run a different function.
The point is to know if there's functions in the kernel that may not
be behaving as the kernel code shows. This can be used for debugging.
TODO: Add this information to kernel oops too.
* tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached
tracing: Fix permissions for the buffer_percent file
Pull locking updates from Ingo Molnar:
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
primitive, which will be used in perf events ring-buffer code
- Simplify/modify rwsems on PREEMPT_RT, to address writer starvation
- Misc cleanups/fixes
* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: Correct (cmp)xchg() instrumentation
locking/x86: Define arch_try_cmpxchg_local()
locking/arch: Wire up local_try_cmpxchg()
locking/generic: Wire up local{,64}_try_cmpxchg()
locking/atomic: Add generic try_cmpxchg{,64}_local() support
locking/rwbase: Mitigate indefinite writer starvation
locking/arch: Rename all internal __xchg() names to __arch_xchg()
If a function had ever had IPMODIFY or DIRECT attached to it, where this
is how live kernel patching and BPF overrides work, mark them and display
an "M" in the enabled_functions and touched_functions files. This can be
used for debugging. If a function had been modified and later there's a bug
in the code related to that function, this can be used to know if the cause
is possibly from a live kernel patch or a BPF program that changed the
behavior of the code.
Also update the documentation on the enabled_functions and
touched_functions output, as it was missing direct callers and CALL_OPS.
And include this new modify attribute.
Link: https://lore.kernel.org/linux-trace-kernel/20230502213233.004e3ae4@gandalf.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull hitfixes from Andrew Morton:
"Five hotfixes. Three are cc:stable, two for this -rc cycle"
* tag 'mm-hotfixes-stable-2023-05-03-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: change per-VMA lock statistics to be disabled by default
MAINTAINERS: update Michal Simek's email
mm/mempolicy: correctly update prev when policy is equal on mbind
relayfs: fix out-of-bounds access in relay_file_read
kasan: hw_tags: avoid invalid virt_to_page()
Pull more MM updates from Andrew Morton:
- Some DAMON cleanups from Kefeng Wang
- Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE
ioctl's behavior more similar to KSM's behavior.
[ Andrew called these "final", but I suspect we'll have a series fixing
up the fact that the last commit in the dmapools series in the
previous pull seems to have unintentionally just reverted all the
other commits in the same series.. - Linus ]
* tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: hwpoison: coredump: support recovery from dump_user_range()
mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page()
mm/ksm: move disabling KSM from s390/gmap code to KSM code
selftests/ksm: ksm_functional_tests: add prctl unmerge test
mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0
mm/damon/paddr: fix missing folio_sz update in damon_pa_young()
mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate()
mm/damon/paddr: minor refactor of damon_pa_pageout()
Pull modules fix from Luis Chamberlain:
"One fix by Arnd far for modules which came in after the first pull
request.
The issue was found as part of some late compile tests with 0-day. I
take it 0-day does some secondary late builds with after some initial
ones"
* tag 'modules-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: include internal.h in module/dups.c
Pull more sysctl updates from Luis Chamberlain:
"As mentioned on my first pull request for sysctl-next, for v6.4-rc1
we're very close to being able to deprecating register_sysctl_paths().
I was going to assess the situation after the first week of the merge
window.
That time is now and things are looking good. We only have one which
had already an ACK for so I'm picking this up here now and the last
patch is the one that uses an axe.
I have boot tested the last patch and 0-day build completed
successfully"
* tag 'sysctl-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: remove register_sysctl_paths()
kernel: pid_namespace: simplify sysctls with register_sysctl()
Pull more power management updates from Rafael Wysocki:
"These fix a hibernation test mode regression and clean up the
intel_idle driver.
Specifics:
- Make test_resume work again after the changes that made hibernation
open the snapshot device in exclusive mode (Chen Yu)
- Clean up code in several places in intel_idle (Artem Bityutskiy)"
* tag 'pm-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: mark few variables as __read_mostly
intel_idle: do not sprinkle module parameter definitions around
intel_idle: fix confusing message
intel_idle: improve C-state flags handling robustness
intel_idle: further intel_idle_init_cstates_icpu() cleanup
intel_idle: clean up intel_idle_init_cstates_icpu()
intel_idle: use pr_info() instead of printk()
PM: hibernate: Do not get block device exclusively in test_resume mode
PM: hibernate: Turn snapshot_test into global variable
Two newly introduced functions are declared in a header that is not
included before the definition, causing a warning with sparse or
'make W=1':
kernel/module/dups.c:118:6: error: no previous prototype for 'kmod_dup_request_exists_wait' [-Werror=missing-prototypes]
118 | bool kmod_dup_request_exists_wait(char *module_name, bool wait, int *dup_ret)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/module/dups.c:220:6: error: no previous prototype for 'kmod_dup_request_announce' [-Werror=missing-prototypes]
220 | void kmod_dup_request_announce(char *module_name, int ret)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Add an explicit include to ensure the prototypes match.
Fixes: 8660484ed1 ("module: add debugging auto-load duplicate module support")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304141440.DYO4NAzp-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
There is a crash in relay_file_read, as the var from
point to the end of last subbuf.
The oops looks something like:
pc : __arch_copy_to_user+0x180/0x310
lr : relay_file_read+0x20c/0x2c8
Call trace:
__arch_copy_to_user+0x180/0x310
full_proxy_read+0x68/0x98
vfs_read+0xb0/0x1d0
ksys_read+0x6c/0xf0
__arm64_sys_read+0x20/0x28
el0_svc_common.constprop.3+0x84/0x108
do_el0_svc+0x74/0x90
el0_svc+0x1c/0x28
el0_sync_handler+0x88/0xb0
el0_sync+0x148/0x180
We get the condition by analyzing the vmcore:
1). The last produced byte and last consumed byte
both at the end of the last subbuf
2). A softirq calls function(e.g __blk_add_trace)
to write relay buffer occurs when an program is calling
relay_file_read_avail().
relay_file_read
relay_file_read_avail
relay_file_read_consume(buf, 0, 0);
//interrupted by softirq who will write subbuf
....
return 1;
//read_start point to the end of the last subbuf
read_start = relay_file_read_start_pos
//avail is equal to subsize
avail = relay_file_read_subbuf_avail
//from points to an invalid memory address
from = buf->start + read_start
//system is crashed
copy_to_user(buffer, from, avail)
Link: https://lkml.kernel.org/r/20230419040203.37676-1-zhang.zhengming@h3c.com
Fixes: 8d62fdebda ("relay file read: start-pos fix")
Signed-off-by: Zhang Zhengming <zhang.zhengming@h3c.com>
Reviewed-by: Zhao Lei <zhao_lei1@hoperun.com>
Reviewed-by: Zhou Kete <zhou.kete@h3c.com>
Reviewed-by: Pengcheng Yang <yangpc@wangsu.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
