main pull request for v6.4
Core Display:
============
* Bugfixes for error handling during probe
* rework UBWC decoder programming
* prepare_commit cleanup
* bindings for SM8550 (MDSS, DPU), SM8450 (DP)
* timeout calculation fixup
* atomic: use drm_crtc_next_vblank_start() instead of our own
custom thing to calculate the start of next vblank
DP:
==
* interrupts cleanup
DPU:
===
* DSPP sub-block flush on sc7280
* support AR30 in addition to XR30 format
* Allow using REC_0 and REC_1 to handle wide (4k) RGB planes
* Split the HW catalog into individual per-SoC files
DSI:
===
* rework DSI instance ID detection on obscure platforms
GPU:
===
* uapi C++ compatibility fix
* a6xx: More robust gdsc reset
* a3xx and a4xx devfreq support
* update generated headers
* various cleanups and fixes
* GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
* dma-fence deadline hint support and wait-boost
* a640 speedbin support
* a650 speedbin support
Conflicts in drivers/gpu/drm/msm/adreno/adreno_gpu.c:
Conflict between the 7fa5047a43 ("drm: Use of_property_present() for
testing DT property presence") and 9f251f9340 ("drm/msm/adreno: Use
OPP for every GPU generation"). The latter removed the of_ function
call outright, so I went with what's in the PR unchanged.
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwuj5tabyW910+N-B=5kFNAC7QNYoQ=0xi3roBjQvFFQ@mail.gmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
For sm8150+ the DPU_CTL_SPLIT_DISPLAY should be replaced with
DPU_CTL_ACTIVE_CFG support (which supports having a single CTL for both
interfaces in a split). Add comments where this conversion is required.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/530871/
Link: https://lore.kernel.org/r/20230404130622.509628-31-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
UBWC and highest bank settings differ slightly between different DPU
units of the same generation, while the dpu_caps and dpu_mdp_cfg are
much more stable. To ease configuration reuse move ubwc_swizzle and
highest_bank_bit data to separate structure.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530820/
Link: https://lore.kernel.org/r/20230404130622.509628-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
These blocks are of variable length on different SoCs. Set the
correct values where I was able to retrieve it from downstream
DTs and leave the old defaults (0x280) otherwise.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[DB: fixed some lengths, split the INTF changes away]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/530816/
Link: https://lore.kernel.org/r/20230404130622.509628-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
These blocks are of variable length on different SoCs. Set the
correct values where I was able to retrieve it from downstream
DTs and leave the old defaults (0x1c8) otherwise.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[DB: fixed some of lengths, split the INTF changes away]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530814/
Link: https://lore.kernel.org/r/20230404130622.509628-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Core:
- Bugfixes for error handling during probe
- rework UBWC decoder programming
- prepare_commit cleanup
- bindings for SM8550 (MDSS, DPU), SM8450 (DP)
- uapi C++ compatibility fix
- timeout calculation fixup
- msm_fbdev conversion to drm_client
DP:
- interrupts cleanup
DPU:
- DSPP sub-block flush on sc7280
- support AR30 in addition to XR30 format
- Allow using REC_0 and REC_1 to handle wide (4k) RGB planes
DSI:
- rework DSI instance ID detection on obscure platforms
and misc small fixes as usual.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Merge DPU changes, resolving conflicts between branches. Full changelog
will be present in the final merge commit.
DPU:
- DSPP sub-block flush on sc7280
- support AR30 in addition to XR30 format
- Allow using REC_0 and REC_1 to handle wide (4k) RGB planes
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
smatch reports
drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:658:26: warning: symbol
'msm8x76_config' was not declared. Should it be static?
This variable is only used in one file so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530950/
Link: https://lore.kernel.org/r/20230404185329.1925964-1-trix@redhat.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Now that the only user is handled by common code, remove the option to
specify custom handlers through match data.
This is effectively a revert of commit:
5ae15e76271 ("drm/msm/dsi: Allow to specify dsi config as pdata")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527662/
Link: https://lore.kernel.org/r/20230307-topic-dsi_qcm-v6-7-70e13b1214fa@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Now that the logic can handle multiple sets of registers, move
the QCM2290 to the common logic and mark it deprecated. This allows us
to remove a couple of structs, saving some memory.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527656/
Link: https://lore.kernel.org/r/20230307-topic-dsi_qcm-v6-6-70e13b1214fa@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The configs are identical, other than the number of *maximum* DSI
hosts allowed. This isn't an issue, unless somebody deliberately
tries to access the inexistent host by adding a dt node for it.
Remove the SC7180 struct and point the hw revision match to the
SDM845's one. On a note, this could have been done back when
7180 support was introduced.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527654/
Link: https://lore.kernel.org/r/20230307-topic-dsi_qcm-v6-5-70e13b1214fa@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
If our interrupt handler gets called and we don't really handle the
interrupt then we should return IRQ_NONE. The current interrupt
handler didn't do this, so let's fix it.
NOTE: for some of the cases it's clear that we should return IRQ_NONE
and some cases it's clear that we should return IRQ_HANDLED. However,
there are a few that fall somewhere in between. Specifically, the
documentation for when to return IRQ_NONE vs. IRQ_HANDLED is probably
best spelled out in the commit message of commit d9e4ad5bad ("Document
that IRQ_NONE should be returned when IRQ not actually handled"). That
commit makes it clear that we should return IRQ_HANDLED if we've done
something to make the interrupt stop happening.
The case where it's unclear is, for instance, in dp_aux_isr() after
we've read the interrupt using dp_catalog_aux_get_irq() and confirmed
that "isr" is non-zero. The function dp_catalog_aux_get_irq() not only
reads the interrupts but it also "ack"s all the interrupts that are
returned. For an "unknown" interrupt this has a very good chance of
actually stopping the interrupt from happening. That would mean we've
identified that it's our device and done something to stop them from
happening and should return IRQ_HANDLED. Specifically, it should be
noted that most interrupts that need "ack"ing are ones that are
one-time events and doing an "ack" is enough to clear them. However,
since these interrupts are unknown then, by definition, it's unknown
if "ack"ing them is truly enough to clear them. It's possible that we
also need to remove the original source of the interrupt. In this
case, IRQ_NONE would be a better choice.
Given that returning an occasional IRQ_NONE isn't the absolute end of
the world, however, let's choose that course of action. The IRQ
framework will forgive a few IRQ_NONE returns now and again (and it
won't even log them, which is why we have to log them ourselves). This
means that if we _do_ end hitting an interrupt where "ack"ing isn't
enough the kernel will eventually detect the problem and shut our
device down.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/520660/
Link: https://lore.kernel.org/r/20230126170745.v2.2.I2d7aec2fadb9c237cd0090a47d6a8ba2054bf0f8@changeid
[DB: reformatted commit message to make checkpatch happy]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently, we allow for MAX_DSI entries in io_start to facilitate for
MAX_DSI number of DSI hosts at different addresses. The configuration
is matched against the DSI CTRL hardware revision read back from the
component. We need a way to resolve situations where multiple SoCs
with different register maps may use the same version of DSI CTRL. In
preparation to do so, make msm_dsi_config a 2d array where each entry
represents a set of configurations adequate for a given SoC.
This is totally fine to do, as the only differentiating factors
between same-version-different-SoCs configurations are the number of
DSI hosts (1 or 2, at least as of today) and the set of base registers.
The regulator setup is the same, because the DSI hardware is the same,
regardless of the SoC it was implemented in.
In addition to that, update the matching logic such that it will loop
over VARIANTS_MAX variants, making sure they are all taken into account.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527652/
Link: https://lore.kernel.org/r/20230307-topic-dsi_qcm-v6-3-70e13b1214fa@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The DP AUX interrupt handling was a bit of a mess.
* There were two functions (one for "native" transfers and one for
"i2c" transfers) that were quite similar. It was hard to say how
many of the differences between the two functions were on purpose
and how many of them were just an accident of how they were coded.
* Each function sometimes used "else if" to test for error bits and
sometimes didn't and again it was hard to say if this was on purpose
or just an accident.
* The two functions wouldn't notice whether "unknown" bits were
set. For instance, there seems to be a bit "DP_INTR_PLL_UNLOCKED"
and if it was set there would be no indication.
* The two functions wouldn't notice if more than one error was set.
Let's fix this by being more consistent / explicit about what we're
doing.
By design this could cause different handling for AUX transfers,
though I'm not actually aware of any bug fixed as a result of
this patch (this patch was created because we simply noticed how odd
the old code was by code inspection). Specific notes here:
1. In the old native transfer case if we got "done + wrong address"
we'd ignore the "wrong address" (because of the "else if"). Now we
won't.
2. In the old native transfer case if we got "done + timeout" we'd
ignore the "timeout" (because of the "else if"). Now we won't.
3. In the old native transfer case we'd see "nack_defer" and translate
it to the error number for "nack". This differed from the i2c
transfer case where "nack_defer" was given the error number for
"nack_defer". This 100% can't matter because the only user of this
error number treats "nack defer" the same as "nack", so it's clear
that the difference between the "native" and "i2c" was pointless
here.
4. In the old i2c transfer case if we got "done" plus any error
besides "nack" or "defer" then we'd ignore the error. Now we don't.
5. If there is more than one error signaled by the hardware it's
possible that we'll report a different one than we used to. I don't
know if this matters. If someone is aware of a case this matters we
should document it and change the code to make it explicit.
6. One quirk we keep (I don't know if this is important) is that in
the i2c transfer case if we see "done + defer" we report that as a
"nack". That seemed too intentional in the old code to just drop.
After this change we will add extra logging, including:
* A warning if we see more than one error bit set.
* A warning if we see an unexpected interrupt.
* A warning if we get an AUX transfer interrupt when shouldn't.
It actually turns out that as a result of this change then at boot we
sometimes see an error:
[drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy
That means that, during init, we are seeing DP_INTR_PLL_UNLOCKED. For
now I'm going to say that leaving this error reported in the logs is
OK-ish and hopefully it will encourage someone to track down what's
going on at init time.
One last note here is that this change renames one of the interrupt
bits. The bit named "i2c done" clearly was used for native transfers
being done too, so I renamed it to indicate this.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/520658/
Link: https://lore.kernel.org/r/20230126170745.v2.1.I90ffed3ddd21e818ae534f820cb4d6d8638859ab@changeid
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In preparation for supporting multiple sets of possible base registers,
remove the num_dsi variable. We're comparing the io_start array contents
with the reg value from the DTS, so it will either match one of the
expected values or don't match against a zero (which we get from partial
array initialization).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527658/
Link: https://lore.kernel.org/r/20230307-topic-dsi_qcm-v6-2-70e13b1214fa@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Daniel Vetter
Dmitry Baryshkov
Konrad Dybcio
Jessica Zhang
Tom Rix
Colin Ian King
Douglas Anderson
Vinod Polimera
Kalyan Thota