Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
More Qualcomm driver updates for 6.3
The qcom_scm.h file is moved into firmware/qcom, to avoid having any
Qualcomm-specific files directly in include/linux.
Support for PMIC GLINK is introduced, which on newer Qualcomm platforms
provides an interface to the firmware implementing battery management
and USB Type-C handling. Together with the base driver comes the custom
altmode support driver.
SMD RPM gains support for IPQ9574, and socinfo is extended with support
for revision 17 of the information format and soc_id for IPQ5332 and
IPQ8064 are added.
The qcom_stats is changes not to fail when not all parts are
initialized.
* tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
soc: qcom: pmic_glink: Introduce base PMIC GLINK driver
dt-bindings: soc: qcom: Introduce PMIC GLINK binding
soc: qcom: dcc: Drop driver for now
Link: https://lore.kernel.org/r/20230210182242.2023901-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm driver updates for v6.3
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
* tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Add wait-queue handling logic
dt-bindings: firmware: qcom,scm: Add optional interrupt
Revert "dt-bindings: power: rpmpd: Add SM4250 support"
Revert "soc: qcom: rpmpd: Add SM4250 support"
soc: qcom: socinfo: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add QRD board ID
soc: qcom: socinfo: Fix soc_id order
dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels
dt-bindings: firmware: qcom: scm: Separate VMIDs from header to bindings
soc: qcom: rmtfs: Optionally map RMTFS to more VMs
dt-bindings: reserved-memory: rmtfs: Make qcom,vmid an array
dt-bindings: firmware: scm: Add QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: narrow clocks and interconnects
dt-bindings: firmware: qcom,scm: document MSM8226 clocks
soc: qcom: ramp_controller: Make things static
soc: qcom: rmphpd: add power domains for sa8775p
dt-bindings: power: qcom,rpmpd: document sa8775p
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
soc: qcom: dcc: rewrite description of dcc sysfs files
...
Link: https://lore.kernel.org/r/20230126163008.3676950-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Introduce MediaTek regulator coupler driver to ensure that the SRAM
voltage in par with the GPU voltage. This allows for a stable use of the
GPU.
mtk-mutex:
- add support for MT8188 vdosys0 path
- allow it to be build as module
- add support for MT8195 vdosys1 path
mmsys:
- add MT8188 vdosys0 path
- allow to be build as a module
- add MT8195 vdosys1 path
- add support for CMDQ
- allow for up to 64 reset bits
- add supprot for the MT8195 vppsys[0,1] pathes
pm-domains:
- keep power for the MT8186 ADSP on by default
- add support for MT8188
- add support for buck isolation needed in specific pm-domains for
MT8188 and MT8192
mtk-svs:
- enable IRQ later to allow using kexec
- several improvments on the code base
- fix modalias
pmic wrapper:
- convert binding to yaml. As this is thightly coupled to the MT6357
PMIC, I took patches regarding it as well.
* tag 'v6.2-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (41 commits)
soc: mediatek: mtk-svs: add missing MODULE_DEVICE_TABLE
soc: mediatek: mtk-devapc: Switch to devm_clk_get_enabled()
soc: mtk-svs: mt8183: refactor o_slope calculation
soc: mediatek: mtk-svs: delete superfluous platform data entries
soc: mediatek: mtk-svs: move svs_platform_probe into probe
soc: mediatek: mtk-svs: improve readability of platform_probe
soc: mediatek: mtk-svs: clean up platform probing
soc: mediatek: mtk-svs: keep svs alive if CONFIG_DEBUG_FS not supported
soc: mediatek: mtk-svs: Use pm_runtime_resume_and_get() in svs_init01()
soc: mediatek: mtk-svs: reset svs when svs_resume() fail
soc: mediatek: mtk-svs: restore default voltages when svs_init02() fail
soc: mediatek: mmsys: add support for MT8195 VPPSYS
dt-bindings: arm: mediatek: mmsys: Add support for MT8195 VPPSYS
soc: mediatek: Introduce mediatek-regulator-coupler driver
soc: mediatek: mtk-svs: Enable the IRQ later
soc: mediatek: add mtk-mutex support for mt8195 vdosys1
soc: mediatek: add mtk-mutex component - dp_intf1
soc: mediatek: mmsys: add reset control for MT8195 vdosys1
soc: mediatek: mmsys: add mmsys for support 64 reset bits
soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1
...
Link: https://lore.kernel.org/r/396d51fc-81f3-4a2b-d7a7-b966bfe3002a@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Amlogic ARM64 DT changes for v6.3:
- Merge of immutable bindings branch with Reset & power domain binding
- New boards:
- Odroid-N2L (Smaller version of Odroid-N2+)
- BananaPi M2-Pro (Variant of BPI=M5 with on-board wifi)
- Radxa Zero2 (New version of Radza Zero with A311D SoC)
- Add DT node for the VIPNano-QI on the A311D
- DT bindings fixups covering all SoC families
- MAC address nodes
- ethernet PHY node name
- scpi & child node names
- SD/SDIO node name
- USB supply name
- invalid clock-names
- rng node name
- rtc node name
- ETH phy mux node name
- button & adc keys node name
- leds node names
- RK818 pmic properties
- remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1
- Fix WiFi/Bt definition around P212 & Khadas VIM1
- Add audio node to P212
- Fix FAN trip definition to Odroid-HC4
- Fix gpio-fan gpios definition
- Permit Radxa Zero OTG on USB1
- Fix VDDIO_C enable gpio by using OPEN DRAIN flag
* tag 'amlogic-arm64-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (43 commits)
arm64: dts: meson: add support for Radxa Zero2
dt-bindings: arm: amlogic: add support for Radxa Zero2
arm64: dts: meson: add support for BananaPi M2-Pro
dt-bindings: arm: amlogic: add support for BananaPi M2-Pro
arm64: dts: meson: bananapi-m5: convert dts to dtsi
arm64: dts: meson: bananapi-m5: remove redundant status from sound node
arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
arm64: dts: meson: radxa-zero: allow usb otg mode
arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an array
arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2L
arm64: dts: meson-g12b: move common node into new odroid.dtsi
dt-bindings: arm: amlogic: document Odroid-N2L
arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip
arm64: dts: meson: add audio playback to S905X-P212 dts
arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1
arm64: dts: meson: move pwm_ef node in P212 dtsi
arm64: dts: meson: add Broadcom WiFi to P212 dtsi
arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties
arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name
arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name
...
Link: https://lore.kernel.org/r/c1641ffd-71c9-9ac9-89d9-c22da4acea10@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Amlogic Drivers changes for v6.3:
- Merge of immutable bindings branch with Reset & power domain binding
- Addition of NNA power domain for A311D SoC
- meson_sm.txt conversionto dt-schema
- mark amlogic,meson-gx-pwrc bindings as deprecated
- fix of meson_sm driver by using NULL instead of 0
* tag 'amlogic-drivers-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
firmware: meson_sm: stop using 0 as NULL pointer
dt-bindings: power: amlogic,meson-gx-pwrc: mark bindings as deprecated
dt-bindings: firmware: convert meson_sm.txt to dt-schema
soc: amlogic: meson-pwrc: Add NNA power domain for A311D
dt-bindings: power: Add G12A NNA power domain
dt-bindings: reset: meson-g12a: Add missing NNA reset
Link: https://lore.kernel.org/r/ec9552d8-96df-a677-ab94-9723f5c30f1c@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
RISC-V SoC drivers for v6.3-mw0
It's all StarFive stuff this time:
Their new JH7110 SoC uses a SiFive core complex, and therefore a
SiFive cache controller too. That needed a compatible added to both the
binding and driver.
The JH7110 also has power domains, which are supported by a new driver
and a corresponding dt-binding.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
soc: starfive: Add StarFive JH71XX pmu driver
dt-bindings: power: Add starfive,jh7110-pmu
soc: sifive: ccache: Add StarFive JH7110 support
dt-bindings: sifive,ccache0: Support StarFive JH7110 SoC
Link: https://lore.kernel.org/r/Y9LNIm9pkr+Owv/e@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull remoteproc updates from Bjorn Andersson:
"rproc-virtio device names are now auto generated, to avoid conflicts
between remoteproc instances.
The imx_rproc driver is extended with support for communicating with
and attaching to a running M4 on i.MX8QXP, as well as support for
attaching to the M4 after self-recovering from a crash. Support is
added for i.MX8QM and mailbox channels are reconnected during the
recovery process, in order to avoid data corruption.
The Xilinx Zynqmp firmware interface is extended and support for the
Xilinx R5 RPU is introduced.
Various resources leaks, primarily in error paths, throughout the
Qualcomm drivers are corrected.
Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
instance is stopped between a crash is being reported and the recovery
handler is scheduled"
* tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteproc: core: Do pm_relax when in RPROC_OFFLINE state
remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
remoteproc: qcom_q6v5_pas: detach power domains on remove
remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
remoteproc: sysmon: Make QMI message rules const
drivers: remoteproc: Add Xilinx r5 remoteproc driver
firmware: xilinx: Add RPU configuration APIs
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
remoteproc: core: Use device_match_of_node()
remoteproc: imx_rproc: Correct i.MX93 DRAM mapping
remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP
remoteproc: imx_rproc: Request mbox channel later
remoteproc: imx_rproc: Support i.MX8QM
remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP
...
More Qualcomm driver updates for 6.2
Socinfo is extended with knowledge about MSM8956, MSM8976, SM6115,
SM4250, SM8150, SA8155 and SM8550.
Support for RSC v3, as found in SM8550 is added to the RPMH RSC driver.
Support for SM8550 and SM4250 ARC regulators are added to the RPM(h)
power-domain drivers. SM8550 support is added to the LLCC driver.
The AOSS QMP binding is declared compatible for SM8550.
BWMON and LLCC now selects REGMAP_MMIO to ensure dependencies are built
properly.
* tag 'qcom-drivers-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants
soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155
dt-bindings: soc: qcom: apr: document generic qcom,apr compatible
soc: qcom: Select REMAP_MMIO for ICC_BWMON driver
soc: qcom: Select REMAP_MMIO for LLCC driver
soc: qcom: rpmpd: Add SM4250 support
dt-bindings: power: rpmpd: Add SM4250 support
dt-bindings: soc: qcom: aoss: Add compatible for SM8550
soc: qcom: llcc: Add configuration data for SM8550
dt-bindings: arm: msm: Add LLCC compatible for SM8550
soc: qcom: llcc: Add v4.1 HW version support
soc: qcom: socinfo: Add SM8550 ID
soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response
soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets
soc: qcom: rpmhpd: Add SM8550 power domains
dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding
soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976
Link: https://lore.kernel.org/r/20221207154134.3233779-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm driver updates for 6.2
The qcom,msm-id and qcom,board-id DeviceTree properties are documented,
to allow them to be used in configurations or devices requiring these
and the socinfo driver is updated to reuse the introduced identifiers.
The rpmh-rsc driver is extended to register for PM runtime notifications
from the CPU clusters, in order to submit sleep and wake votes the last
core in a cluster is being powered down.
A mechanism for keeping rpmhpd resources voted until sync_state is
introduced, this ensures that power-domains required during boot are
kept enabled. The rpmhpd power-domains for SDM670 are also added.
Support for the new QDU1000/QRU1000 platform is introduced in the rpmhpd
and socinfo drivers.
The APR driver gains missing error handling. QMI message descriptors in
the PDR driver are made const.
Support for the RPM found in SM6375 is added. The SPM driver gains
support for MSM8939 and MSM8976 platforms.
The stats and command-db drvers are marked as not having PM support.
* tag 'qcom-drivers-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (36 commits)
dt-bindings: firmware: scm: add sdm670 compatible
soc: qcom: rpmh-rsc: Write CONTROL_TCS with next timer wakeup
soc: qcom: rpmh-rsc: Save base address of drv
PM: domains: Store the next hrtimer wakeup in genpd
soc: qcom: rpmh-rsc: Attach RSC to cluster PM domain
dt-bindings: soc: qcom: Update devicetree binding document for rpmh-rsc
dt-bindings: soc: qcom: qcom,smd-rpm: Use qcom,smd-channels on MSM8976
soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index
soc: qcom: socinfo: Add QDU1000/QRU1000 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for QDU1000/QRU1000
soc: qcom: rpmhpd: Add QDU1000/QRU1000 power domains
dt-bindings: power: rpmpd: Add QDU1000/QRU1000 to rpmpd binding
dt-bindings: qcom: smp2p: Add WPSS node names to pattern property
soc: qcom: spm: Implement support for SAWv2.3, MSM8976 L2 PM
dt-bindings: soc: qcom: spm: Add compatibles for MSM8976 L2
soc: qcom: llcc: make irq truly optional
soc: qcom: spm: Add MSM8939 SPM register data
dt-bindings: soc: qcom: spm: Add MSM8939 CPU compatible
dt-bindings: soc: qcom: aoss: Add sc8280xp compatible
dt-bindings: firmware: document Qualcomm SM6375 SCM
...
Link: https://lore.kernel.org/r/20221122202748.1854487-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Update the device-tree clock, memory, power and reset headers for
Tegra234 by adding the definitions for all the various devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Qualcomm driver updates for 6.1
The icc-bwmon driver is expected to support measuring LLCC/DDR bandwidth
on SDM845 and SC7280.
The LLCC driver is extended to provide per-platform register mappings to
the LLCC EDAC driver. The QMI encoder/decoder is updated to allow the
passed qmi_elem_info to be const.
Support for SDM845 is added to the sleep stats driver. Power-domains for
the SM6375 platform is added to RPMPD and the platform is added to
socinfo, together with the PM6125 pmic id.
A couple of of_node reference issues are corrected in the smem state and
smsm drivers.
The Qualcomm SCM driver binding is converted to YAML.
* tag 'qcom-drivers-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (29 commits)
soc: qcom: rpmpd: Add SM6375 support
dt-bindings: power: rpmpd: Add SM6375 power domains
firmware: qcom: scm: remove unused __qcom_scm_init declaration
dt-bindings: power: qcom,rpmpd: drop non-working codeaurora.org emails
soc: qcom: icc-bwmon: force clear counter/irq registers
soc: qcom: icc-bwmon: add support for sc7280 LLCC BWMON
dt-bindings: interconnect: qcom,msm8998-bwmon: Add support for sc7280 BWMONs
soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver
soc: qcom: llcc: Rename reg_offset structs to reflect LLCC version
soc: qcom: qmi: use const for struct qmi_elem_info
soc: qcom: icc-bwmon: remove redundant ret variable
dt-bindings: soc: qcom: stats: Document SDM845 compatible
soc: qcom: stats: Add SDM845 stats config and compatible
dt-bindings: firmware: document Qualcomm SM6115 SCM
soc: qcom: Make QCOM_RPMPD depend on OF
dt-bindings: firmware: convert Qualcomm SCM binding to the yaml
soc: qcom: socinfo: Add PM6125 ID
soc: qcom: socinfo: Add an ID for SM6375
soc: qcom: smem_state: Add refcounting for the 'state->of_node'
soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe()
...
Link: https://lore.kernel.org/r/20220921155753.1316308-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX8MP VPU blk ctrl module has similar design as i.MX8MM, so reuse
the i.MX8MM VPU blk ctrl yaml file. And add description for the items.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
Pull ARM DT updates from Arnd Bergmann:
"As usual, the bulk of the changes for the SoC tree are devicetree file
updates, and most of these changes are for 64-bit embedded machines.
As before, there are a ton of style cleanups, and additional hardware
support for existing machines.
Looking only at the new SoC, the notable additions are:
- A whole family of Broadcom broadband SoCs, both 32-bit and 64-bit:
BCM63178, BCM63158, BCM4912, BCM6858, BCM6878, BCM6846, BCM63146,
BCM6856, BCM6855, BCM6756, BCM63148, and BCM6813. Each SoC comes
with a corresponding reference board.
- The new NXP i.MX93 SoC, the follow-up to the popular i.MX6 and
i.MX8 embedded SoCs, now using Cortex-A55 cores and the Ethos-U65
NPU.
- Qualcomm Snapdragon 8cx Gen3 (SC8280XP), the current high end of
Arm based Laptop SoCs, and its automotive cousin, the SA8540P. The
SC8280XP is used in the Lenovo Thinkpad X13s laptop that also gets
added here in addition to the reference boards.
- Allwinner H616, a newer version of the H6 SoC, targeted at
Set-top-box applications. It comes with dts files for the Orange Pi
zero2 single-board computer and the X96 Mate set-top-box
- Marvell Prestera 98DX2530 (AlleyCat5), a network switch chip in the
Armada SoC family based on the Cortex-A55 core.
New machines based on previously supported SoCs include:
- Several new machines on NXP i.MX platforms: multiple Toradex
Colibri boards using the "Iris" and "Ixora" carriers, DH
electronics i.MX8M Plus DHCOM and PDK2, TQ-Systems TQMa8MPQL, and
phytech phyBOARD-Polis-i.MX8MM.
- Google Chameleon v3 FPGA board based on Intel Arria10 and Stratix
10 Software Virtual platform, both in the SoCFPGA platform.
- Two new wireless devices based on Broadcom SoCs: The Asus GT-AX6000
Router and the Cisco Meraki MR26 access point
- Improved Chromebook support for both the Mediatek and Qualcomm SoC
families brought added machines: Acer Chromebook 514 (MT8192), Acer
Chromebook Spin 513 (MT8195) and a couple of SC7180 based machines
including the Lenovo IdeaPad Chromebook Duet 3.
- Xiaomi Mi Mix2s, LG G7 and LG V35 are mobile phones based on
Qualcomm SDM845, while Mi 5s Plus is based on MSM8996.
- Finally, there are a few development board on other chips: PCB8309
(Microchip lan966x), Radxa Rock Pi S (Rockchips RK3308) DH DRC
Compact (ST STM32MP1) and Inforce IFC6560 (Qualcomm SDM660)"
* tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (829 commits)
dt-bindings: soc: bcm: use absolute path to other schema
dt-bindings: soc: bcm: drop quotes when not needed
dt-bindings: soc: microchip: use absolute path to other schema
dt-bindings: soc: microchip: drop quotes when not needed
ARM: dts: lan966x: keep lan966 entries alphabetically sorted
ARM: dts: lan966x: add support for pcb8309
dt-bindings: arm: at91: add lan966 pcb8309 board
ARM: dts: lan966x: Enable network driver on pcb8291
ARM: dts: lan966x: Disable can0 on pcb8291
ARM: dts: lan966x: Add gpio-restart
dt-bindings: arm: aspeed: add Aspeed Evaluation boards
arm64: dts: qcom: Add support for Xiaomi Mi Mix2s
dt-bindings: arm: qcom: Add Xiaomi Mi Mix2s bindings
dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices
dt-bindings: arm: qcom: add missing SM6350 board compatibles
dt-bindings: arm: qcom: add missing SM6125 board compatibles
dt-bindings: arm: qcom: add missing SDM845 board compatibles
dt-bindings: arm: qcom: add missing SDM636 board compatibles
dt-bindings: arm: qcom: add missing SDM630 board compatibles
dt-bindings: arm: qcom: add missing QCS404 board compatibles
...
More Qualcomm driver changes for v5.20
This adds support for booting secondary cores, SPM, SMD-RPM and RPM
power-domain support for the MSM8909 platform.
It drops an unnecessary print in icc-bwmon, corrects SA8540P entries in
socinfo and a Kconfig build dependency for QCOM_RPMPD.
Lastly it continues to clean up up the Devicetree bindings for the
Qualcomm drivers.
* tag 'qcom-drivers-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
ARM: mach-qcom: Add support for MSM8909
dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
soc: qcom: spm: Add CPU data for MSM8909
dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
soc: qcom: rpmpd: Add compatible for MSM8909
dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
soc: qcom: smd-rpm: Add compatible for MSM8909
dt-bindings: soc: qcom: smd-rpm: Add MSM8909
soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
soc: qcom: socinfo: Fix the id of SA8540P SoC
soc: qcom: Make QCOM_RPMPD depend on PM
Link: https://lore.kernel.org/r/20220720230648.2113609-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license version 2 as
published by the free software foundation this program is distributed
in the hope that it will be useful merchantability or fitness for a
particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qualcomm driver updates for v5.19
This converts a wide range of Qualcomm-related DeviceTree bindings to
YAML, in order to improve our ability to validate the DeviceTree source.
The RPMh power-domain driver gains support for the modem platform SDX65,
the compute platform SC8280XP and the automotive platform SA8540p. While
LLCC gains support for SC8180X and SC8280XP and gains a
MODULE_DEVICE_TABLE() to make it functional as a module.
It adds a driver for configuring the SSC bus, providing Linux access to
the hardware blocks in the sensor subsystem.
The socinfo driver gets confusion related to MSM8974 Pro sorted out and
adds new ids for SM8540 and SC7280.
The SCM driver gains support for MSM8974.
Add missing of_node_put() in smp2p and smsm drivers.
Stop using iterator after list_for_each_entry() and define static
definitions as such, in the PDR driver.
* tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
soc: qcom: pdr: use static for servreg_* variables
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains
soc: qcom: rpmhpd: Don't warn about sparse rpmhpd arrays
dt-bindings: power: rpmpd: Add sc8280xp RPMh power-domains
spi: dt-bindings: qcom,spi-geni-qcom: convert to dtschema
soc: qcom: socinfo: Sort out 8974PRO names
dt-bindings: soc: qcom,smp2p: convert to dtschema
dt-bindings: qcom: geni-se: Update UART schema reference
dt-bindings: qcom: geni-se: Update I2C schema reference
dt-bindings: soc: qcom,rpmh-rsc: convert to dtschema
bus: add driver for initializing the SSC bus on (some) qcom SoCs
dt-bindings: bus: add device tree bindings for qcom,ssc-block-bus
dt-bindings: qcom: qcom,geni-se: refer to dtschema for SPI
dt-bindings: soc: qcom,smd: convert to dtschema
firmware: qcom_scm: Add compatible for MSM8976 SoC
dt-bindings: firmware: qcom-scm: Document msm8976 bindings
soc: qcom: smem: validate fields of shared structures
soc: qcom: smem: map only partitions used by local HOST
...
Link: https://lore.kernel.org/r/20220509181839.316655-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX drivers update for 5.19:
- A series from Lucas and Paul to update GPCv2 driver for i.MX8MP power
domains, and add HSIO and HDMI block control support.
* tag 'imx-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: fix semicolon.cocci warnings
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains
dt-bindings: soc: Add i.MX8MP media block control DT bindings
soc: imx: imx8m-blk-ctrl: set power device name
soc: imx: gpcv2: add support for i.MX8MP power domains
soc: imx: gpcv2: add PGC control register indirection
Link: https://lore.kernel.org/r/20220508033843.2773685-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds the defines for the power domains provided by the HDMI
blk-ctrl on the i.MX8MP.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level
peripheral providing access to the NoC and ensuring proper power
sequencing of the peripherals within the MEDIAMIX domain. Add DT
bindings for it.
There is already a driver for block controls of other SoCs in the i.MX8M
family, so these bindings will expand upon that.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
