Add VERBOSE and MEMBLOCK_DEBUG user-provided arguments. VERBOSE will
enable verbose output from Memblock simulator. MEMBLOCK_DEBUG will enable
memblock_dbg() messages.
Update the help message to include VERBOSE and MEMBLOCK_DEBUG. Update
the README to include VERBOSE. The README does not include all available
options and refers to the help message for the remaining options.
Therefore, omit MEMBLOCK_DEBUG from README.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/5503f3efe82ecef5c99961a1d53003c8ad06cf27.1656907314.git.remckee0@gmail.com
Tests that permanent mdb entries can be added/deleted on ports with state down.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test va_128TBswitch.c expects to be able to pass mmap an address hint
and length that cross the address 1<<47. On x86_64, this is not possible
without 5-level page tables, so the test fails.
The test is already only run on 64-bit powerpc and x86_64 archs, but this
patch adds an additional check on x86_64 that skips the test if
PG_TABLE_LEVELS < 5. There is precedent for checking /proc/config.gz in
selftests, e.g. in selftests/firmware.
Running the tests produces the desired output:
sudo make -C tools/testing/selftests TARGETS=vm run_tests
---------------------------
running ./va_128TBswitch.sh
---------------------------
./va_128TBswitch.sh: PG_TABLE_LEVELS=4, must be >= 5 to run this test
[SKIP]
-------------------------------
[adam@wowsignal.io: restrict the check to x86_64]
Link: https://lkml.kernel.org/r/20220628163654.337600-1-adam@wowsignal.io
[adam@wowsignal.io: fix formatting issues, rename "die" to "fail"]
Link: https://lkml.kernel.org/r/20220701163030.415735-1-adam@wowsignal.io
Link: https://lkml.kernel.org/r/20220627163912.5581-1-adam@wowsignal.io
Signed-off-by: Adam Sindelar <adam@wowsignal.io>
Cc: Adam Sindelar <ats@fb.com>
Cc: David Vernet <void@manifault.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On Android this test is getting stuck in an infinite loop due to
indeterminate behavior:
The local variables steps and signalled were being reset to 1 and 0
respectively after every jump back to sigsetjmp by siglongjmp in the
signal handler. The test was incrementing them and expecting them to
retain their incremented values. The documentation for siglongjmp says:
All accessible objects have values as of the time sigsetjmp() was called,
except that the values of objects of automatic storage duration which are
local to the function containing the invocation of the corresponding
sigsetjmp() which do not have volatile-qualified type and which are
changed between the sigsetjmp() invocation and siglongjmp() call are
indeterminate.
Tagging steps and signalled with volatile enabled the test to pass.
Link: https://lkml.kernel.org/r/20220613233321.431282-1-edliaw@google.com
Signed-off-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Global variables do not need to be initialized to 0 and checkpatch
flags this error in tools/testing/selftests/timers/alarmtimer-suspend.c:
ERROR: do not initialise globals to 0
+int final_ret = 0;
Fix this checkpatch error.
Signed-off-by: Zan Aziz <zanaziz313@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since commit 8fffa0e345 ("selftests/bpf: Normalize XDP section names in
selftests") the xdp_dummy.o's section name has changed to xdp. But some
tests are still using "section xdp_dummy", which make the tests failed.
Fix them by updating to the new section name.
Fixes: 8fffa0e345 ("selftests/bpf: Normalize XDP section names in selftests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220630062228.3453016-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2022-07-02
We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 6 files changed, 193 insertions(+), 86 deletions(-).
The main changes are:
1) Fix clearing of page contiguity when unmapping XSK pool, from Ivan Malov.
2) Two verifier fixes around bounds data propagation, from Daniel Borkmann.
3) Fix fprobe sample module's parameter descriptions, from Masami Hiramatsu.
4) General BPF maintainer entry revamp to better scale patch reviews.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Add verifier test case for jmp32's jeq/jne
bpf, selftests: Add verifier test case for imm=0,umin=0,umax=1 scalar
bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals
bpf: Fix incorrect verifier simulation around jmp32's jeq/jne
xsk: Clear page contiguity bit when unmapping pool
bpf, docs: Better scale maintenance of BPF subsystem
fprobe, samples: Add module parameter descriptions
====================
Link: https://lore.kernel.org/r/20220701230121.10354-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test case to trigger the verifier's incorrect conclusion in the
case of jmp32's jeq/jne. Also here, make use of dead code elimination,
so that we can see the verifier bailing out on unfixed kernels.
Before:
# ./test_verifier 724
#724/p jeq32/jne32: bounds checking FAIL
Failed to load prog 'Permission denied'!
R4 !read_ok
verification time 8 usec
stack depth 0
processed 8 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 0
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
After:
# ./test_verifier 724
#724/p jeq32/jne32: bounds checking OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220701124727.11153-4-daniel@iogearbox.net
Add a test case to trigger the constant scalar issue which leaves the
register in scalar(imm=0,umin=0,umax=1,var_off=(0x0; 0x0)) state. Make
use of dead code elimination, so that we can see the verifier bailing
out on unfixed kernels. For the condition, we use jle given it checks
on umax bound.
Before:
# ./test_verifier 743
#743/p jump & dead code elimination FAIL
Failed to load prog 'Permission denied'!
R4 !read_ok
verification time 11 usec
stack depth 0
processed 13 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
After:
# ./test_verifier 743
#743/p jump & dead code elimination OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220701124727.11153-3-daniel@iogearbox.net
parsing and usage of -t got missed in the previous patch.
this patch fixes it
Fixes: 816cda9ae5 ("selftests: net: fib_rule_tests: add support to select a test to run")
Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ANDROID config symbol is only used to guard the binder config
symbol and to inject completely random config changes. Remove it
as it is obviously a bad idea.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220629150102.1582425-2-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c
9c5de246c1 ("net: sparx5: mdb add/del handle non-sparx5 devices")
fbb89d02e3 ("net: sparx5: Allow mdb entries to both CPU and ports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - new code bugs:
- clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()
- mptcp:
- invoke MP_FAIL response only when needed
- fix shutdown vs fallback race
- consistent map handling on failure
- octeon_ep: use bitwise AND
Previous releases - regressions:
- tipc: move bc link creation back to tipc_node_create, fix NPD
Previous releases - always broken:
- tcp: add a missing nf_reset_ct() in 3WHS handling, prevent socket
buffered skbs from keeping refcount on the conntrack module
- ipv6: take care of disable_policy when restoring routes
- tun: make sure to always disable and unlink NAPI instances
- phy: don't trigger state machine while in suspend
- netfilter: nf_tables: avoid skb access on nf_stolen
- asix: fix "can't send until first packet is send" issue
- usb: asix: do not force pause frames support
- nxp-nci: don't issue a zero length i2c_master_read()
Misc:
- ncsi: allow use of proper "mellanox" DT vendor prefix
- act_api: add a message for user space if any actions were already
flushed before the error was hit
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6dPN
-----END PGP SIGNATURE-----
Merge tag 'net-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - new code bugs:
- clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()
- mptcp:
- invoke MP_FAIL response only when needed
- fix shutdown vs fallback race
- consistent map handling on failure
- octeon_ep: use bitwise AND
Previous releases - regressions:
- tipc: move bc link creation back to tipc_node_create, fix NPD
Previous releases - always broken:
- tcp: add a missing nf_reset_ct() in 3WHS handling to prevent socket
buffered skbs from keeping refcount on the conntrack module
- ipv6: take care of disable_policy when restoring routes
- tun: make sure to always disable and unlink NAPI instances
- phy: don't trigger state machine while in suspend
- netfilter: nf_tables: avoid skb access on nf_stolen
- asix: fix "can't send until first packet is send" issue
- usb: asix: do not force pause frames support
- nxp-nci: don't issue a zero length i2c_master_read()
Misc:
- ncsi: allow use of proper "mellanox" DT vendor prefix
- act_api: add a message for user space if any actions were already
flushed before the error was hit"
* tag 'net-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
net: dsa: felix: fix race between reading PSFP stats and port stats
selftest: tun: add test for NAPI dismantle
net: tun: avoid disabling NAPI twice
net: sparx5: mdb add/del handle non-sparx5 devices
net: sfp: fix memory leak in sfp_probe()
mlxsw: spectrum_router: Fix rollback in tunnel next hop init
net: rose: fix UAF bugs caused by timer handler
net: usb: ax88179_178a: Fix packet receiving
net: bonding: fix use-after-free after 802.3ad slave unbind
ipv6: fix lockdep splat in in6_dump_addrs()
net: phy: ax88772a: fix lost pause advertisement configuration
net: phy: Don't trigger state machine while in suspend
usbnet: fix memory allocation in helpers
selftests net: fix kselftest net fatal error
NFC: nxp-nci: don't print header length mismatch on i2c error
NFC: nxp-nci: Don't issue a zero length i2c_master_read()
net: tipc: fix possible refcount leak in tipc_sk_create()
nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
net: ipv6: unexport __init-annotated seg6_hmac_net_init()
ipv6/sit: fix ipip6_tunnel_get_prl return value
...
Currently, xsk_socket__delete frees BPF resources regardless of ctx
refcount. Xdpxceiver has a test to verify whether underlying BPF
resources would not be wiped out after closing XSK socket that was
bound to interface with other active sockets. From library's xsk part
perspective it also means that the internal xsk context is shared and
its refcount is bumped accordingly.
After a switch to loading XDP prog based on previously opened XSK
socket, mentioned xdpxceiver test fails with:
not ok 16 [xdpxceiver.c:swap_xsk_resources:1334]: ERROR: 9/"Bad file descriptor
which means that in swap_xsk_resources(), xsk_socket__delete() released
xskmap which in turn caused a failure of xsk_socket__update_xskmap().
To fix this, when deleting socket, decrement ctx refcount before
releasing BPF resources and do so only when refcount dropped to 0 which
means there are no more active sockets for this ctx so BPF resources can
be freed safely.
Fixes: 2f6324a393 ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220629143458.934337-5-maciej.fijalkowski@intel.com
To prevent the case we had previously where for TEST_MODE_SKB, XDP prog
was attached in native mode, call bpf_xdp_query() after loading prog and
make sure that attach_mode is as expected.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220629143458.934337-4-maciej.fijalkowski@intel.com
Currently, xsk_setup_xdp_prog() uses anonymous xsk_socket struct which
means that during xsk_create_bpf_link() call, xsk->config.xdp_flags is
always 0. This in turn means that from xdpxceiver it is impossible to
use xdpgeneric attachment, so since commit 3b22523bca ("selftests,
xsk: Fix bpf_res cleanup test") we were not testing SKB mode at all.
To fix this, introduce a function, called xsk_setup_xdp_prog_xsk(), that
will load XDP prog based on the existing xsk_socket, so that xsk
context's refcount is correctly bumped and flags from application side
are respected. Use this from xdpxceiver side so we get coverage of
generic and native XDP program attach points.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220629143458.934337-3-maciej.fijalkowski@intel.com
Currently bpf_link probe is done for each call of xsk_socket__create().
For cases where xsk context was previously created and current socket
creation uses it, has_bpf_link will be overwritten, where it has already
been initialized.
Optimize this by moving the query to the xsk_create_ctx() so that when
xsk_get_ctx() finds a ctx then no further bpf_link probes are needed.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220629143458.934337-2-maciej.fijalkowski@intel.com
Now that bpftool is able to produce a list of known program, map, attach
types, let's use as much of this as we can in the bash completion file,
so that we don't have to expand the list each time a new type is added
to the kernel.
Also update the relevant test script to remove some checks that are no
longer needed.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Müller <deso@posteo.net>
Link: https://lore.kernel.org/bpf/20220629203637.138944-3-quentin@isovalent.com
The incorrect path is causing the following error when trying to run net
kselftests:
In file included from bpf/nat6to4.c:43:
../../../lib/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
^~~~~~~~~~~~~~~~~~~
1 error generated.
Fixes: cf67838c44 ("selftests net: fix bpf build error")
Signed-off-by: Coleman Dietsch <dietschc@csp.edu>
Link: https://lore.kernel.org/r/20220628174744.7908-1-dietschc@csp.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Has been slowly getting out of sync, let's update it.
resolve_btfids usage has been updated to match the header changes.
Also bring new parts of tools/include/uapi/linux/bpf.h.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220628174314.1216643-8-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, this script sets up the test scenario, which is supposed to end
in an inability of the system to negotiate a link. It then waits for a bit,
and verifies that the system can diagnose why the link was not established.
The wait time for the scenario where different link speeds are forced on
the two ends of a loopback cable, was set to 4 seconds, which exactly
covered it. As of a recent mlxsw firmware update, this time gets longer,
and this test starts failing.
The time that selftests currently wait for links to be established is
currently $WAIT_TIMEOUT, or 20 seconds. It seems reasonable that if this is
the time necessary to establish and bring up a link, it should also be
enough to determine that a link cannot be established and why.
Therefore in this patch, convert the sleeps to busywaits, so that if a
failure is established sooner (as is expected), the test runs quicker. And
use $WAIT_TIMEOUT as the time to wait.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This failing signature:
[ 8.392669] cxl_bus_probe: cxl_port endpoint2: probe: 970997760
[ 8.392670] cxl_port: probe of endpoint2 failed with error 970997760
[ 8.392719] create_endpoint: cxl_mem mem0: add: endpoint2
[ 8.392721] cxl_mem mem0: endpoint2 failed probe
[ 8.392725] cxl_bus_probe: cxl_mem mem0: probe: -6
...shows cxl_hdm_decode_init() resulting in a return code ("970997760")
that looks like stack corruption. The problem goes away if
cxl_hdm_decode_init() is not mocked via __wrap_cxl_hdm_decode_init().
The corruption results from the mismatch that the calling convention for
cxl_hdm_decode_init() is:
int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm)
...and __wrap_cxl_hdm_decode_init() is:
bool __wrap_cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm)
...i.e. an int is expected but __wrap_hdm_decode_init() returns bool.
Fix the convention and cleanup the organization to match
__wrap_cxl_await_media_ready() as the difference was a red herring that
distracted from finding the bug.
Fixes: 92804edb11 ("cxl/pci: Drop @info argument to cxl_hdm_decode_init()")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603870776.551046.8709990108936497723.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In a few MPTCP selftest tools, gcc 12 complains that the 'sock' variable
might be used uninitialized. This is a false positive because the only
code path that could lead to uninitialized access is where getaddrinfo()
fails, but the local xgetaddrinfo() wrapper exits if such a failure
occurs.
Initialize the 'sock' variable anyway to allow the tools to build with
gcc 12.
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mentioned test-case still use an hard-coded-len sleep to
wait for a relative large number of connection to be established.
On very slow VM and with debug build such timeout could be exceeded,
causing failures in our CI.
Address the issue polling for the expected condition several times,
up to an unreasonable high amount of time. On reasonably fast system
the self-tests will be faster then before, on very slow one we will
still catch the correct condition.
Fixes: df62f2ec3d ("selftests/mptcp: add diag interface tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The testcase checks if the transalation of a generic hardware cache
event is done properly via perf interface. The hardware cache events has
type as PERF_TYPE_HW_CACHE and each event points to raw event code id.
Testcase checks different combination of cache level, cache event
operation type and cache event result type and verify for a given event
code, whether transalation matches with the current cache event mappings
via perf interface.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-36-atrajeev@linux.vnet.ibm.com
Thresh select bits in the event code is used to program thresh_sel field
in Monitor Mode Control Register A (MMCRA: 45-47). When scheduling
events as a group, all events in that group should match value in these
bits. Otherwise event open for the sibling events will fail.
Testcase uses event code PM_MRK_INST_CMPL (0x401e0) as leader and
another event PM_THRESH_MET (0x101ec) as sibling event, and checks if
group constraint checks for thresh_sel field added correctly via perf
interface.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-35-atrajeev@linux.vnet.ibm.com
Thresh control bits in the event code is used to program thresh_ctl
field in Monitor Mode Control Register A (MMCRA: 48-55). When scheduling
events as a group, all events in that group should match value in these
bits. Otherwise event open for the sibling events will fail.
Testcase uses event code PM_MRK_INST_CMPL (0x401e0) as leader and
another event PM_THRESH_MET (101ec) as sibling event, and checks if
group constraint checks for thresh_ctl field added correctly via perf
interface.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-34-atrajeev@linux.vnet.ibm.com
Unit and pmu bits in the event code is used to program unit and pmc
fields in Monitor Mode Control Register 1 (MMCR1). For power9 platform,
incase unit field value is within 6 to 9, one of the event in the group
should use PMC4. Otherwise event_open should fail for that group.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-33-atrajeev@linux.vnet.ibm.com
Thresh compare bits for a event is used to program thresh compare field
in Monitor Mode Control Register A (MMCRA: 9-18 bits for power9 and
MMCRA: 8-18 bits for power10). When scheduling events as a group, all
events in that group should match value in thresh compare bits.
Otherwise event open for the sibling events will fail.
Testcase uses event code "0x401e0" as leader and another event "0x101ec"
as sibling event, and checks for thresh compare constraint via perf
interface.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-32-atrajeev@linux.vnet.ibm.com
Data and instruction cache qualifier bits in the event code is used to
program cache select field in Monitor Mode Control Register 1 (MMCR1:
16-17). When scheduling events as a group, all events in that group
should match value in these bits. Otherwise event open for the sibling
events will fail.
Testcase uses event code "0x1100fc" as leader and other events like
"0x23e054" and "0x13e054" as sibling events to checks for l1 cache
select field constraints via perf interface.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-31-atrajeev@linux.vnet.ibm.com
In power10, L2L3 select bits in the event code is used to program
l2l3_sel field in Monitor Mode Control Register 0 (MMCR0: 56-60). When
scheduling events as a group, all events in that group should match
value in these bits. Otherwise event open for the sibling events will
fail.
Testcase uses event code "0x010000046080" as leader and another events
"0x26880" and "0x010000026880" as sibling events, and checks for
l2l3_sel constraints via perf interface for ISA v3.1 platform.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-30-atrajeev@linux.vnet.ibm.com
Testcase to ensure that using invalid event in generic event for
PERF_TYPE_HARDWARE will fail. Invalid generic events in power10 are:
- PERF_COUNT_HW_BUS_CYCLES
- PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
- PERF_COUNT_HW_STALLED_CYCLES_BACKEND
- PERF_COUNT_HW_REF_CPU_CYCLES
Invalid generic events in power9 are:
- PERF_COUNT_HW_BUS_CYCLES
- PERF_COUNT_HW_REF_CPU_CYCLES
Testcase does event open for valid and invalid generic events to ensure
event open works for all valid events and fails for invalid events.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-29-atrajeev@linux.vnet.ibm.com
Platform specific PMU supports alternative event for some of the event
codes. During perf_event_open, it any event group doesn't match
constraint check criteria, further lookup is done to find alternative
event. Code checks to see if it is possible to schedule event as group
using alternative events.
Testcase exercises the alternative event find code for power10. Example,
Using PMC1 to PMC4 in a group and again trying to schedule
PM_CYC_ALT (0x0001e) will fail since this exceeds number of programmable
events in group. But since 0x600f4 is an alternative event for 0x0001e,
it is possible to use 0x0001e in the group. Testcase uses such
combination all events in power10 which has alternative event.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-28-atrajeev@linux.vnet.ibm.com
Platform specific PMU supports alternative event for some of the event
codes. During perf_event_open, it any event group doesn't match
constraint check criteria, further lookup is done to find alternative
event. Code checks to see if it is possible to schedule event as group
using alternative events.
Testcase exercises the alternative event find code for power9. Example,
since events in same PMC can't go in as a group, ideally using
PM_RUN_CYC_ALT (0x200f4) and PM_BR_TAKEN_CMPL (0x200fa) will fail. But
since RUN_CYC (0x600f4) is alternative event for 0x200f4, it is possible
to use 0x600f4 and 0x200fa as group. Testcase uses such combination for
all events in power9 which has an alternative event.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-27-atrajeev@linux.vnet.ibm.com
Some of the events are blacklisted in power9. The list of blacklisted
events are noted in power9-events-list.h When trying to do event open
for any of these blacklisted event will cause a failure. Testcase
ensures that using blacklisted events will cause event_open to fail in
power9. This test is only applicable on power9 DD2.1 and DD2.2 and hence
test adds checks to skip on other platforms.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-26-atrajeev@linux.vnet.ibm.com
Testcase for reserved bits in Monitor Mode Control Register A (MMCRA)
thresh_ctl bits. For MMCRA[48:51]/[52:55]) Threshold Start/Stop,
0b11110000/0b00001111 is reserved.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-25-atrajeev@linux.vnet.ibm.com
Some of the bits in the event code is reserved for specific platforms.
Event code bits 52-59 are reserved in power9, whereas in power10, these
are used for programming Monitor Mode Control Register 3 (MMCR3). Bit 9
in event code is reserved in power9, whereas it is used for programming
"radix_scope_qual" bit 18 in Monitor Mode Control Register 1 (MMCR1).
Testcase to ensure that using reserved bits in event code should cause
event_open to fail.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-24-atrajeev@linux.vnet.ibm.com
Events with different "sample" field values which is used to program
Monitor Mode Control Register A (MMCRA) in a group will fail to
schedule. Testcase uses event with load only sampling mode as group
leader and event with store only sampling as sibling event. So that it
can check that using different sample bits in event code will fail in
event open for group of events
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-23-atrajeev@linux.vnet.ibm.com
Testcase for reserved bits in Monitor Mode Control Register A (MMCRA)
Random Sampling Mode (SM) value. As per Instruction Set
Architecture (ISA), the values 0x5, 0x9, 0xD, 0x19, 0x1D, 0x1A, 0x1E are
reserved for sampling mode field. Test that having these reserved bit
values should cause event_open to fail. Input event code in testcases
uses these sampling bits along with 401e0 (PM_MRK_INST_CMPL).
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-22-atrajeev@linux.vnet.ibm.com
Testcase for group constraint check for radix_scope_qual field which is
used to program Monitor Mode Control Register (MMCR1) bit 18. All events
in the group should match radix_scope_qual bit, otherwise event_open for
the group should fail. Testcase uses "0x14242" (PM_DATA_RADIX_PROCESS_L2_PTE_FROM_L2)
with radix_scope_qual bit set for power10.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-21-atrajeev@linux.vnet.ibm.com
Testcase for group constraint check when using events with same PMC.
Multiple events in a group asking for same PMC should fail. Testcase
uses "0x22C040" on PMC2 as leader and also subling which is expected to
fail. Using PMC1 for sibling event should pass the test.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-20-atrajeev@linux.vnet.ibm.com
Testcase for group constraint check for number of counters in use. The
number of programmable counters is from PMC1 to PMC4. Testcase uses four
events with PMC1 to PMC4 and 5th event without any PMC which is expected
to fail since it is exceeding the number of counters in use.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-19-atrajeev@linux.vnet.ibm.com
Events using Performance Monitor Counter 5 (PMC5) and Performance
Monitor Counter 6 (PMC6) should be excluded from constraint check when
scheduled along with group of events. Example, combination of PMC5,
PMC6, and an event with cache bit will succeed to schedule though first
two events doesn't have cache bit set. Testcase use three events, ie,
600f4(cycles), 500fa(instructions), 22C040 with cache bit (dc_ic) set to
test this constraint check.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-18-atrajeev@linux.vnet.ibm.com
Events using Performance Monitor Counter 5 (PMC5) and Performance
Monitor Counter 6 (PMC6) can't have other fields in event code like
cache bits, thresholding or marked bit. PMC5 and PMC6 only supports base
events: ie 500fa and 600f4. Other combinations should fail. Testcase
tries setting other bits in event code for 500fa and 600f4 to check this
scenario.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-17-atrajeev@linux.vnet.ibm.com
Add new folder for enabling perf event code tests which includes
checking for group constraints, valid/invalid events, also checks for
event excludes, alternatives so on. A new folder "event_code_tests", is
created under "selftests/powerpc/pmu".
Also updates the corresponding Makefiles in "selftests/powerpc" and
"event_code_tests" folder.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-16-atrajeev@linux.vnet.ibm.com
The testcase uses "instructions" event to generate the samples and fetch
Monitor Mode Control Register A (MMCRA) when overflow. Branch History
Rolling Buffer(bhrb) disable bit is part of MMCRA which need to be
verified by perf interface. Incase sample is not of branch type, bhrb
disable bit is explicitly set to 1. Testcase checks if the bhrb disable
bit is set of MMCRA register via perf interface for ISA v3.1 platform
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-15-atrajeev@linux.vnet.ibm.com
The testcase uses event code "0x21c040" to verify the settings for
different fields in Monitor Mode Control Register 1 (MMCR1). The fields
include PMCxSEL, PMCXCOMB PMCxUNIT, cache. Checks if these fields are
translated correctly via perf interface to MMCR1
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-14-atrajeev@linux.vnet.ibm.com
For PERF_SAMPLE_BRANCH_STACK sample type, different branch_sample_type,
ie branch filters are supported. All the branch filters are not
supported in powerpc. Example, power10 platform supports any, ind_call
and cond branch filters. Whereas, it is different in power9. Testcase
checks event open for invalid and valid branch sample types. The branch
types for testcase are picked from "perf_branch_sample_type" in
perf_event.h
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-13-atrajeev@linux.vnet.ibm.com
With sampling, --intr-regs option is used for capturing
interrupt regs. When --intr-regs option is used, PMU code
uses is_sier_available() function which uses PMU flags in
the code. In environment where platform specific PMU is
not registered, PMU flags is not defined. A fix was added
in kernel to address crash while accessing is_sier_available()
function when pmu is not set. commit f75e7d73bd ("powerpc/perf:
Fix crash with is_sier_available when pmu is not set").
Add perf sampling test to exercise this code and make sure
enabling intr_regs shouldn't crash in any platform. Testcase
uses software event cycles since software event will work even
in cases without PMU.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-12-atrajeev@linux.vnet.ibm.com
While enabling branch stack for an event, BHRB (Branch History
Rolling Buffer) filter is set using bhrb_filter_map() callback.
This callback is not defined for cases like generic_compat_pmu
or in case where there is no PMU registered. A fix was added
in kernel to address a crash issue observed while enabling branch
stack for environments which doesn't have this callback.
commit b460b51241 ("powerpc/perf: Fix crashes with
generic_compat_pmu & BHRB").
Add perf sampling test to exercise this code path and make
sure enabling branch stack shouldn't crash in any platform.
Testcase uses software event cycles since software event is
available and can be used even in cases without PMU.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-11-atrajeev@linux.vnet.ibm.com
The platform check for selftest support "check_pvr_for_sampling_tests"
is specific to sampling tests which includes PVR check, presence of
PMU and extended regs support. Extended regs support is needed for
sampling tests which tests whether PMU registers are programmed
correctly. There could be other sampling tests which may not need
extended regs, example, bhrb filter tests which only needs validity
check via event open.
Hence refactor the platform check to have a common function
"platform_check_for_tests" that checks only for PVR check
and presence of PMU. The existing function
"check_pvr_for_sampling_tests" will invoke the common function
and also will include checks for extended regs specific for
sampling. The common function can also be used by tests other
than sampling like event code tests.
Add macro to find array size ("ARRAY_SIZE") to sampling
tests "misc.h" file. This can be used in next tests to
find event array size. Also update "include/reg.h" to
add macros to find minor and major version from PVR which
will be used in testcases.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-10-atrajeev@linux.vnet.ibm.com
Libbpf 1.0 stops support legacy-style BPF map definitions. Selftests has
been migrated away from using legacy BPF map definitions except for two
selftests, to make sure that legacy functionality still worked in
pre-1.0 libbpf. Now it's time to let those tests go as libbpf 1.0 is
imminent.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-14-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove deprecated xsk APIs from libbpf. But given we have selftests
relying on this, move those files (with minimal adjustments to make them
compilable) under selftests/bpf.
We also remove all the removed APIs from libbpf.map, while overall
keeping version inheritance chain, as most APIs are backwards
compatible so there is no need to reassign them as LIBBPF_1.0.0 versions.
Cc: Magnus Karlsson <magnus.karlsson@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add error messages when the module test-drm_mm is not found or could
not be removed to make tests output more readable.
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Due to CreatePrimary commands which need to create RSA keys of
increasing size, the timeout value need to be raised, as well.
Default is 45s.
Fixed git am white space warns:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Johannes Holland <johannes.holland@infineon.com>
Signed-off-by: Stefan Mahnke-Hartmann <stefan.mahnke-hartmann@infineon.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The testcase uses "instructions" event to generate the
samples and fetch Monitor Mode Control Register A (MMCRA)
when overflow. Branch History Rolling Buffer(bhrb) disable bit
is part of MMCRA which need to be verified by perf interface.
Testcase checks if the bhrb disable bit of MMCRA register is
programmed correctly via perf interface for ISA v3.1 platform
Also make get_mmcra_ifm return type as u64.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-9-atrajeev@linux.vnet.ibm.com
The testcase uses "instructions" event to check if the
Instruction filtering mode(IFM) bits are programmed correctly
for conditional branch type. Testcase checks if IFM bits is
programmed correctly to Monitor Mode Control Register A (MMCRA)
via perf interface for ISA v3.1 platform.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-8-atrajeev@linux.vnet.ibm.com
The testcase uses "instructions" event to check if the
Instruction filtering mode(IFM) bits are programmed correctly
for type any branch. Testcase checks if IFM bits is
programmed correctly to Monitor Mode Control Register A (MMCRA)
via perf interface.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-7-atrajeev@linux.vnet.ibm.com
The testcase uses "instructions" event to check if the
Instruction filtering mode(IFM) bits are programmed correctly
for indirect branch type. Testcase checks if IFM bits are
programmed correctly to Monitor Mode Control Register A (MMCRA)
via perf interface for ISA v3.1 platform.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-6-atrajeev@linux.vnet.ibm.com
Add support for sample type as PERF_SAMPLE_BRANCH_STACK in sampling
tests. This change is a precursor/helper for sampling testcases, that
test branck stack feature in perf interface.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-5-atrajeev@linux.vnet.ibm.com
The testcase uses event code 0x35340401e0 for load only sampling, to
verify the settings of thresh compare field in Monitor Mode Control
Register A (MMCRA: 9-18 bits for power9 and MMCRA: 8-18 bits for
power10). Testcase checks if the thresh compare field is programmed
correctly via perf interface to MMCRA register.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-4-atrajeev@linux.vnet.ibm.com
The /proc/self/auxv contains information about "platform" on any system.
Also "base platform" which is an indication about platform string
corresponding to the real PVR. When systems are booted in compat mode,
say, power10 booted in power9 mode, "platform" will point to power9
whereas base platform will point to power10. Incase, if the distro
doesn't support platform indicated by real PVR, base platform will have
a default value.
The mismatch of platform/base platform is an indication of system booted
in compat mode. In such cases, distro will have a Generic Compat
registered which supports basic features for performance monitoring.
Some of the selftest needs to be handled differently ( ex: generic
events, alternative events, bhrb filter map) in Generic Compat PMU.
Hence selftest framework needs utility functions to identify such cases.
One way is make sure of auxv information. Below condition can be used to
detect if Generic Compat PMU is registered. ie:
if ((AT_PLATFORM != AT_BASE_PLATFORM) && (AT_BASE_PLATFORM != PVR))
this indicates Generic Compat PMU.
Add utility function in "include/utils.h" to return:
AT_PLATFORM and AT_BASE_PLATFORM from auxv. Also update misc.c in
"sampling_tests" folder to add function to use above check to determine
presence of generic compat pmu.
In other architecture ( like x86 ), pmu_name is exposed via
"/sys/bus/event_source/devices/cpu/caps". The same could be used in
powerpc in future. Since currently we don't have the "caps" support in
powerpc, patch uses auxv information to detect platform type and compat
mode. But as placeholder utility function is added considering
possiblity of getting "caps" information via sysfs. If that doesn't
exist, fallback to using auxv information.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-3-atrajeev@linux.vnet.ibm.com
In power10, threshold compare field is not part of the raw event code
and provided via event attribute config1. Hence add the mask and shift
bits based on event attribute config1, to extract the threshold compare
value for power10
Also add a new function called get_thresh_cmp_val to compute and return
the threshold compare field for a given platform, since incase of
power10, threshold compare value provided is decimal.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-2-atrajeev@linux.vnet.ibm.com
When checking for libc rseq support in the library constructor, don't
only depend on the symbols presence, check that the registration was
completed.
This targets a scenario where the libc has rseq support but it is not
wired for the current architecture in 'bits/rseq.h', we want to fallback
to our internal registration mechanism.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20220614154830.1367382-4-mjeanson@efficios.com
This header is also used in librseq where it can be included in C++
code, add a space between literals and string macros.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20220614154830.1367382-3-mjeanson@efficios.com
Make the RISC-V rseq selftests compatible with glibc-2.35 by using the
rseq_get_abi() helper.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20220614154830.1367382-2-mjeanson@efficios.com
Add tdc test cases to verify new flush behaviour is correct, which do
the following:
- Try to flush only one action which is being referenced by a filter
- Try to flush three actions where the last one (index 3) is being
referenced by a filter
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kernel is in lockdown mode when secureboot is enabled and hence
debugfs cannot be used. Add support for this and other general cases
where debugfs cannot be read and communicate the same to the user before
running tests.
Signed-off-by: Gautam <gautammenghani201@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a colon in the "Optional" test usage message to ensure consistency
with the "Default" test usage message.
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In the install section of the main Makefile of kselftests, the echo
command is used with -n flag, which disables the printing of new line
due to which the output contains "\n" chars as follows:
Emit Tests for alsa\nSkipping non-existent dir: arm64
Emit Tests for breakpoints\nEmit Tests for capabilities\n
This patch fixes the above bug by using the -e flag.
Signed-off-by: Gautam <gautammenghani201@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Older machines don't have the firmware feature that enables the code
this test is testing. Skip the test if the sysfs directory doesn't
exist. Also use the FAIL_IF() macro to provide more verbose error
reporting if an error is encountered.
Fixes: 57201d657e ("selftest/powerpc: Add PAPR sysfs attributes sniff test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220619233103.2666171-1-mpe@ellerman.id.au
when we modfying kernel, commit it to our environment building. we find a error
that is "tools/testing/selftests/tc-testing/plugins" failed: No such file or directory"
we find plugins directory is ignored in
"tools/testing/selftests/tc-testing/.gitignore", but the plugins directory
is need in "tools/testing/selftests/tc-testing/Makefile"
Signed-off-by: liujing <liujing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220622121237.5832-1-liujing@cmss.chinamobile.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Fix a regression with pKVM when kmemleak is enabled
* Add Oliver Upton as an official KVM/arm64 reviewer
selftests:
* deal with compiler optimizations around hypervisor exits
x86:
* MAINTAINERS reorganization
* Two SEV fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmK1cjIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMayQf+JOOggLacjPPa/t/CE8kIcbX0IWc+
epEdq/f0qgxJlAjUB9YKgMr2Io9jPScyTdY8t6uS0WyZ7Q1NyAogXfds/dF4wElm
IMWWfLTSU3gzCmzPh8n6SfbWtRGJKsOukK0cDIIh86h5YnXDmeyVjJrDvEVQOnzG
TjHOKYuFXGPj8/NKwcrxqBFHK9DBNxn9b/UBRArG+5AZM0mx3Jl8LJMYUDEIyAyO
yhNfTh7gPPidEiJLkFDyHWKg5rhO3fbn8UrncY+eTmSBqMHvvY0+eka6urwihN0v
ExmKqy00ES51c/6r+zqsqYICqVSqiaNNWF4lp1HTp7LrUBtxyZAqnkBbHQ==
=U2ol
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix a regression with pKVM when kmemleak is enabled
- Add Oliver Upton as an official KVM/arm64 reviewer
selftests:
- deal with compiler optimizations around hypervisor exits
x86:
- MAINTAINERS reorganization
- Two SEV fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV: Init target VMCBs in sev_migrate_from
KVM: x86/svm: add __GFP_ACCOUNT to __sev_dbg_{en,de}crypt_user()
MAINTAINERS: Reorganize KVM/x86 maintainership
selftests: KVM: Handle compiler optimizations in ucall
KVM: arm64: Add Oliver as a reviewer
KVM: arm64: Prevent kmemleak from accessing pKVM memory
tools/kvm_stat: fix display of error when multiple processes are found
Cover the scenario when we cannot insert a socket into the sockmap, because
it has it is using ULP. Failed insert should not have any effect on the ULP
state. This is a regression test.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220623091231.417138-1-jakub@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test verifies that bpf_loop() inlining works as expected when
address of `env->prog` is updated. This address is updated upon BPF
program reallocation.
Reallocation is handled by bpf_prog_realloc(), which reuses old memory
if page boundary is not crossed. The value of `len` in the test is
chosen to cross this boundary on bpf_loop() patching.
Verify that the use-after-free bug in inline_bpf_loop() reported by
Dan Carpenter is fixed.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220624020613.548108-3-eddyz87@gmail.com
Hardware would directly write x2APIC ICR register instead of software
emulation in some circumstances, e.g when Intel IPI virtualization is
enabled. This behavior requires normal reserved bits checking to ensure
them input as zero, otherwise it will cause #GP. So we need mask out
those reserved bits from the data written to vICR register.
Remove Delivery Status bit emulation in test case as this flag
is invalid and not needed in x2APIC mode. KVM may ignore clearing
it during interrupt dispatch which will lead to fake test failure.
Opportunistically correct vector number for test sending IPI to
non-existent vCPUs.
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220623094511.26066-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch add a self test that verifies user space can inject
UnCorrectable No Action required (UCNA) memory errors to the guest.
It also verifies that incorrectly configured MSRs for Corrected
Machine Check Interrupt (CMCI) emulation will result in #GP.
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-9-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to improve performance across multiple reads of VM stats, cache
the stats metadata in the VM struct.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-11-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an argument to the NX huge pages test to test disabling the feature
on a VM using the new capability.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-10-bgardon@google.com>
[Handle failure of sudo or setcap more gracefully. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's currently no test coverage of NX hugepages in KVM selftests, so
add a basic test to ensure that the feature works as intended.
The test creates a VM with a data slot backed with huge pages. The
memory in the data slot is filled with op-codes for the return
instruction. The guest then executes a series of accesses on the memory,
some reads, some instruction fetches. After each operation, the guest
exits and the test performs some checks on the backing page counts to
ensure that NX page splitting an reclaim work as expected.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-7-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the code to read the binary stats data to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
Also opportunistically remove an unnecessary calculation with
"size_data" in stats_test.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a variety of code style violations and/or inconsistencies in the
binary stats test. The 80 char limit is a soft limit and can and should
be ignored/violated if doing so improves the overall code readability.
Specifically, provide consistent indentation and don't split expressions
at arbitrary points just to honor the 80 char limit.
Opportunistically expand/add comments to call out the more subtle aspects
of the code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-5-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the code to read the binary stats descriptors to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the code to read the binary stats header to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to allocate dynamic memory for the stats header since
its size is known at compile time.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit b433a52aa2 ("selftests/kexec: update get_secureboot_mode")
refactored the code that discovers the EFI secure boot mode so it only
depends on either the efivars pseudo filesystem or the efivars sysfs
interface, but never both.
However, the latter version was not implemented correctly, given the
fact that the local 'efi_vars' variable never assumes a value. This
means the fallback has been dead code ever since it was introduced.
So let's drop the fallback altogether. The sysfs interface has been
deprecated for ~10 years now, and is only enabled on x86 to begin with,
so it is time to get rid of it entirely.
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
udpgso_bench.sh has been running its IPv6 TCP test with IPv4 arguments
since its initial conmit. Looks like a typo.
Fixes: 3a687bef14 ("selftests: udp gso benchmark")
Cc: willemb@google.com
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220623000234.61774-1-dmichail@fungible.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
test_sock_fields__detach() got called with a null pointer here when one
of the CHECKs or ASSERTs up to the test_sock_fields__open_and_load()
call resulted in a jump to the "done" label.
A skeletons *__detach() is not safe to call with a null pointer, though.
This led to a segfault.
Go the easy route and only call test_sock_fields__destroy() which is
null-pointer safe and includes detaching.
Came across this while looking[1] to introduce the usage of
bpf_tcp_helpers.h (included in progs/test_sock_fields.c) together with
vmlinux.h.
[1] https://lore.kernel.org/bpf/629bc069dd807d7ac646f836e9dca28bbc1108e2.camel@mailbox.tu-berlin.de/
Fixes: 8f50f16ff3 ("selftests/bpf: Extend verifier and bpf_sock tests for dst_port loads")
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220621070116.307221-1-jthinz@mailbox.tu-berlin.de
Test whether a TCP CC implemented in BPF providing get_info() is
rejected correctly. get_info() is unsupported in a BPF CC. The check for
required functions in a BPF CC has moved, this test ensures unsupported
functions are still rejected correctly.
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220622191227.898118-6-jthinz@mailbox.tu-berlin.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test whether a TCP CC implemented in BPF providing neither cong_avoid()
nor cong_control() is correctly rejected. This check solely depends on
tcp_register_congestion_control() now, which is invoked during
bpf_map__attach_struct_ops().
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Link: https://lore.kernel.org/r/20220622191227.898118-5-jthinz@mailbox.tu-berlin.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test whether a TCP CC implemented in BPF is allowed to write
sk_pacing_rate and sk_pacing_status in struct sock. This is needed when
cong_control() is implemented and used.
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Link: https://lore.kernel.org/r/20220622191227.898118-4-jthinz@mailbox.tu-berlin.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The selftests, when built with newer versions of clang, is found
to have over optimized guests' ucall() function, and eliminating
the stores for uc.cmd (perhaps due to no immediate readers). This
resulted in the userspace side always reading a value of '0', and
causing multiple test failures.
As a result, prevent the compiler from optimizing the stores in
ucall() with WRITE_ONCE().
Suggested-by: Ricardo Koller <ricarkol@google.com>
Suggested-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Message-Id: <20220615185706.1099208-1-rananta@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current release - regressions:
- netfilter: cttimeout: fix slab-out-of-bounds read in cttimeout_net_exit
Current release - new code bugs:
- bpf: ftrace: keep address offset in ftrace_lookup_symbols
- bpf: force cookies array to follow symbols sorting
Previous releases - regressions:
- ipv4: ping: fix bind address validity check
- tipc: fix use-after-free read in tipc_named_reinit
- eth: veth: add updating of trans_start
Previous releases - always broken:
- sock: redo the psock vs ULP protection check
- netfilter: nf_dup_netdev: fix skb_under_panic
- bpf: fix request_sock leak in sk lookup helpers
- eth: igb: fix a use-after-free issue in igb_clean_tx_ring
- eth: ice: prohibit improper channel config for DCB
- eth: at803x: fix null pointer dereference on AR9331 phy
- eth: virtio_net: fix xdp_rxq_info bug after suspend/resume
Misc:
- eth: hinic: replace memcpy() with direct assignment
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=JFWo
-----END PGP SIGNATURE-----
Merge tag 'net-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- netfilter: cttimeout: fix slab-out-of-bounds read in
cttimeout_net_exit
Current release - new code bugs:
- bpf: ftrace: keep address offset in ftrace_lookup_symbols
- bpf: force cookies array to follow symbols sorting
Previous releases - regressions:
- ipv4: ping: fix bind address validity check
- tipc: fix use-after-free read in tipc_named_reinit
- eth: veth: add updating of trans_start
Previous releases - always broken:
- sock: redo the psock vs ULP protection check
- netfilter: nf_dup_netdev: fix skb_under_panic
- bpf: fix request_sock leak in sk lookup helpers
- eth: igb: fix a use-after-free issue in igb_clean_tx_ring
- eth: ice: prohibit improper channel config for DCB
- eth: at803x: fix null pointer dereference on AR9331 phy
- eth: virtio_net: fix xdp_rxq_info bug after suspend/resume
Misc:
- eth: hinic: replace memcpy() with direct assignment"
* tag 'net-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: openvswitch: fix parsing of nw_proto for IPv6 fragments
sock: redo the psock vs ULP protection check
Revert "net/tls: fix tls_sk_proto_close executed repeatedly"
virtio_net: fix xdp_rxq_info bug after suspend/resume
igb: Make DMA faster when CPU is active on the PCIe link
net: dsa: qca8k: reduce mgmt ethernet timeout
net: dsa: qca8k: reset cpu port on MTU change
MAINTAINERS: Add a maintainer for OCP Time Card
hinic: Replace memcpy() with direct assignment
Revert "drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c"
net: phy: smsc: Disable Energy Detect Power-Down in interrupt mode
ice: ethtool: Prohibit improper channel config for DCB
ice: ethtool: advertise 1000M speeds properly
ice: Fix switchdev rules book keeping
ice: ignore protocol field in GTP offload
netfilter: nf_dup_netdev: add and use recursion counter
netfilter: nf_dup_netdev: do not push mac header a second time
selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh
net/tls: fix tls_sk_proto_close executed repeatedly
erspan: do not assume transport header is always set
...
Add a benchmarks to demonstrate the performance cliff for local_storage
get as the number of local_storage maps increases beyond current
local_storage implementation's cache size.
"sequential get" and "interleaved get" benchmarks are added, both of
which do many bpf_task_storage_get calls on sets of task local_storage
maps of various counts, while considering a single specific map to be
'important' and counting task_storage_gets to the important map
separately in addition to normal 'hits' count of all gets. Goal here is
to mimic scenario where a particular program using one map - the
important one - is running on a system where many other local_storage
maps exist and are accessed often.
While "sequential get" benchmark does bpf_task_storage_get for map 0, 1,
..., {9, 99, 999} in order, "interleaved" benchmark interleaves 4
bpf_task_storage_gets for the important map for every 10 map gets. This
is meant to highlight performance differences when important map is
accessed far more frequently than non-important maps.
A "hashmap control" benchmark is also included for easy comparison of
standard bpf hashmap lookup vs local_storage get. The benchmark is
similar to "sequential get", but creates and uses BPF_MAP_TYPE_HASH
instead of local storage. Only one inner map is created - a hashmap
meant to hold tid -> data mapping for all tasks. Size of the hashmap is
hardcoded to my system's PID_MAX_LIMIT (4,194,304). The number of these
keys which are actually fetched as part of the benchmark is
configurable.
Addition of this benchmark is inspired by conversation with Alexei in a
previous patchset's thread [0], which highlighted the need for such a
benchmark to motivate and validate improvements to local_storage
implementation. My approach in that series focused on improving
performance for explicitly-marked 'important' maps and was rejected
with feedback to make more generally-applicable improvements while
avoiding explicitly marking maps as important. Thus the benchmark
reports both general and important-map-focused metrics, so effect of
future work on both is clear.
Regarding the benchmark results. On a powerful system (Skylake, 20
cores, 256gb ram):
Hashmap Control
===============
num keys: 10
hashmap (control) sequential get: hits throughput: 20.900 ± 0.334 M ops/s, hits latency: 47.847 ns/op, important_hits throughput: 20.900 ± 0.334 M ops/s
num keys: 1000
hashmap (control) sequential get: hits throughput: 13.758 ± 0.219 M ops/s, hits latency: 72.683 ns/op, important_hits throughput: 13.758 ± 0.219 M ops/s
num keys: 10000
hashmap (control) sequential get: hits throughput: 6.995 ± 0.034 M ops/s, hits latency: 142.959 ns/op, important_hits throughput: 6.995 ± 0.034 M ops/s
num keys: 100000
hashmap (control) sequential get: hits throughput: 4.452 ± 0.371 M ops/s, hits latency: 224.635 ns/op, important_hits throughput: 4.452 ± 0.371 M ops/s
num keys: 4194304
hashmap (control) sequential get: hits throughput: 3.043 ± 0.033 M ops/s, hits latency: 328.587 ns/op, important_hits throughput: 3.043 ± 0.033 M ops/s
Local Storage
=============
num_maps: 1
local_storage cache sequential get: hits throughput: 47.298 ± 0.180 M ops/s, hits latency: 21.142 ns/op, important_hits throughput: 47.298 ± 0.180 M ops/s
local_storage cache interleaved get: hits throughput: 55.277 ± 0.888 M ops/s, hits latency: 18.091 ns/op, important_hits throughput: 55.277 ± 0.888 M ops/s
num_maps: 10
local_storage cache sequential get: hits throughput: 40.240 ± 0.802 M ops/s, hits latency: 24.851 ns/op, important_hits throughput: 4.024 ± 0.080 M ops/s
local_storage cache interleaved get: hits throughput: 48.701 ± 0.722 M ops/s, hits latency: 20.533 ns/op, important_hits throughput: 17.393 ± 0.258 M ops/s
num_maps: 16
local_storage cache sequential get: hits throughput: 44.515 ± 0.708 M ops/s, hits latency: 22.464 ns/op, important_hits throughput: 2.782 ± 0.044 M ops/s
local_storage cache interleaved get: hits throughput: 49.553 ± 2.260 M ops/s, hits latency: 20.181 ns/op, important_hits throughput: 15.767 ± 0.719 M ops/s
num_maps: 17
local_storage cache sequential get: hits throughput: 38.778 ± 0.302 M ops/s, hits latency: 25.788 ns/op, important_hits throughput: 2.284 ± 0.018 M ops/s
local_storage cache interleaved get: hits throughput: 43.848 ± 1.023 M ops/s, hits latency: 22.806 ns/op, important_hits throughput: 13.349 ± 0.311 M ops/s
num_maps: 24
local_storage cache sequential get: hits throughput: 19.317 ± 0.568 M ops/s, hits latency: 51.769 ns/op, important_hits throughput: 0.806 ± 0.024 M ops/s
local_storage cache interleaved get: hits throughput: 24.397 ± 0.272 M ops/s, hits latency: 40.989 ns/op, important_hits throughput: 6.863 ± 0.077 M ops/s
num_maps: 32
local_storage cache sequential get: hits throughput: 13.333 ± 0.135 M ops/s, hits latency: 75.000 ns/op, important_hits throughput: 0.417 ± 0.004 M ops/s
local_storage cache interleaved get: hits throughput: 16.898 ± 0.383 M ops/s, hits latency: 59.178 ns/op, important_hits throughput: 4.717 ± 0.107 M ops/s
num_maps: 100
local_storage cache sequential get: hits throughput: 6.360 ± 0.107 M ops/s, hits latency: 157.233 ns/op, important_hits throughput: 0.064 ± 0.001 M ops/s
local_storage cache interleaved get: hits throughput: 7.303 ± 0.362 M ops/s, hits latency: 136.930 ns/op, important_hits throughput: 1.907 ± 0.094 M ops/s
num_maps: 1000
local_storage cache sequential get: hits throughput: 0.452 ± 0.010 M ops/s, hits latency: 2214.022 ns/op, important_hits throughput: 0.000 ± 0.000 M ops/s
local_storage cache interleaved get: hits throughput: 0.542 ± 0.007 M ops/s, hits latency: 1843.341 ns/op, important_hits throughput: 0.136 ± 0.002 M ops/s
Looking at the "sequential get" results, it's clear that as the
number of task local_storage maps grows beyond the current cache size
(16), there's a significant reduction in hits throughput. Note that
current local_storage implementation assigns a cache_idx to maps as they
are created. Since "sequential get" is creating maps 0..n in order and
then doing bpf_task_storage_get calls in the same order, the benchmark
is effectively ensuring that a map will not be in cache when the program
tries to access it.
For "interleaved get" results, important-map hits throughput is greatly
increased as the important map is more likely to be in cache by virtue
of being accessed far more frequently. Throughput still reduces as #
maps increases, though.
To get a sense of the overhead of the benchmark program, I
commented out bpf_task_storage_get/bpf_map_lookup_elem in
local_storage_bench.c and ran the benchmark on the same host as the
'real' run. Results:
Hashmap Control
===============
num keys: 10
hashmap (control) sequential get: hits throughput: 54.288 ± 0.655 M ops/s, hits latency: 18.420 ns/op, important_hits throughput: 54.288 ± 0.655 M ops/s
num keys: 1000
hashmap (control) sequential get: hits throughput: 52.913 ± 0.519 M ops/s, hits latency: 18.899 ns/op, important_hits throughput: 52.913 ± 0.519 M ops/s
num keys: 10000
hashmap (control) sequential get: hits throughput: 53.480 ± 1.235 M ops/s, hits latency: 18.699 ns/op, important_hits throughput: 53.480 ± 1.235 M ops/s
num keys: 100000
hashmap (control) sequential get: hits throughput: 54.982 ± 1.902 M ops/s, hits latency: 18.188 ns/op, important_hits throughput: 54.982 ± 1.902 M ops/s
num keys: 4194304
hashmap (control) sequential get: hits throughput: 50.858 ± 0.707 M ops/s, hits latency: 19.662 ns/op, important_hits throughput: 50.858 ± 0.707 M ops/s
Local Storage
=============
num_maps: 1
local_storage cache sequential get: hits throughput: 110.990 ± 4.828 M ops/s, hits latency: 9.010 ns/op, important_hits throughput: 110.990 ± 4.828 M ops/s
local_storage cache interleaved get: hits throughput: 161.057 ± 4.090 M ops/s, hits latency: 6.209 ns/op, important_hits throughput: 161.057 ± 4.090 M ops/s
num_maps: 10
local_storage cache sequential get: hits throughput: 112.930 ± 1.079 M ops/s, hits latency: 8.855 ns/op, important_hits throughput: 11.293 ± 0.108 M ops/s
local_storage cache interleaved get: hits throughput: 115.841 ± 2.088 M ops/s, hits latency: 8.633 ns/op, important_hits throughput: 41.372 ± 0.746 M ops/s
num_maps: 16
local_storage cache sequential get: hits throughput: 115.653 ± 0.416 M ops/s, hits latency: 8.647 ns/op, important_hits throughput: 7.228 ± 0.026 M ops/s
local_storage cache interleaved get: hits throughput: 138.717 ± 1.649 M ops/s, hits latency: 7.209 ns/op, important_hits throughput: 44.137 ± 0.525 M ops/s
num_maps: 17
local_storage cache sequential get: hits throughput: 112.020 ± 1.649 M ops/s, hits latency: 8.927 ns/op, important_hits throughput: 6.598 ± 0.097 M ops/s
local_storage cache interleaved get: hits throughput: 128.089 ± 1.960 M ops/s, hits latency: 7.807 ns/op, important_hits throughput: 38.995 ± 0.597 M ops/s
num_maps: 24
local_storage cache sequential get: hits throughput: 92.447 ± 5.170 M ops/s, hits latency: 10.817 ns/op, important_hits throughput: 3.855 ± 0.216 M ops/s
local_storage cache interleaved get: hits throughput: 128.844 ± 2.808 M ops/s, hits latency: 7.761 ns/op, important_hits throughput: 36.245 ± 0.790 M ops/s
num_maps: 32
local_storage cache sequential get: hits throughput: 102.042 ± 1.462 M ops/s, hits latency: 9.800 ns/op, important_hits throughput: 3.194 ± 0.046 M ops/s
local_storage cache interleaved get: hits throughput: 126.577 ± 1.818 M ops/s, hits latency: 7.900 ns/op, important_hits throughput: 35.332 ± 0.507 M ops/s
num_maps: 100
local_storage cache sequential get: hits throughput: 111.327 ± 1.401 M ops/s, hits latency: 8.983 ns/op, important_hits throughput: 1.113 ± 0.014 M ops/s
local_storage cache interleaved get: hits throughput: 131.327 ± 1.339 M ops/s, hits latency: 7.615 ns/op, important_hits throughput: 34.302 ± 0.350 M ops/s
num_maps: 1000
local_storage cache sequential get: hits throughput: 101.978 ± 0.563 M ops/s, hits latency: 9.806 ns/op, important_hits throughput: 0.102 ± 0.001 M ops/s
local_storage cache interleaved get: hits throughput: 141.084 ± 1.098 M ops/s, hits latency: 7.088 ns/op, important_hits throughput: 35.430 ± 0.276 M ops/s
Adjusting for overhead, latency numbers for "hashmap control" and
"sequential get" are:
hashmap_control_1k: ~53.8ns
hashmap_control_10k: ~124.2ns
hashmap_control_100k: ~206.5ns
sequential_get_1: ~12.1ns
sequential_get_10: ~16.0ns
sequential_get_16: ~13.8ns
sequential_get_17: ~16.8ns
sequential_get_24: ~40.9ns
sequential_get_32: ~65.2ns
sequential_get_100: ~148.2ns
sequential_get_1000: ~2204ns
Clearly demonstrating a cliff.
In the discussion for v1 of this patch, Alexei noted that local_storage
was 2.5x faster than a large hashmap when initially implemented [1]. The
benchmark results show that local_storage is 5-10x faster: a
long-running BPF application putting some pid-specific info into a
hashmap for each pid it sees will probably see on the order of 10-100k
pids. Bench numbers for hashmaps of this size are ~10x slower than
sequential_get_16, but as the number of local_storage maps grows far
past local_storage cache size the performance advantage shrinks and
eventually reverses.
When running the benchmarks it may be necessary to bump 'open files'
ulimit for a successful run.
[0]: https://lore.kernel.org/all/20220420002143.1096548-1-davemarchevsky@fb.com
[1]: https://lore.kernel.org/bpf/20220511173305.ftldpn23m4ski3d3@MBP-98dd607d3435.dhcp.thefacebook.com/
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20220620222554.270578-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test to verify the "MONITOR/MWAIT never fault" quirk, and as a
bonus, also verify the related "MISC_ENABLES ignores ENABLE_MWAIT" quirk.
If the "never fault" quirk is enabled, MONITOR/MWAIT should always be
emulated as NOPs, even if they're reported as disabled in guest CPUID.
Use the MISC_ENABLES quirk to coerce KVM into toggling the MWAIT CPUID
enable, as KVM now disallows manually toggling CPUID bits after running
the vCPU.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220608224516.3788274-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This Kselftest fixes update for Linux 5.19-rc4 consists of compile
time fixes and run-time resources leaks.
-- Fix clang cross compilation
-- Fix resource leak when return error
-- fix compile error for dma_map_benchmark
-- Fix regression - make use of GUP_TEST_FILE macro
-----BEGIN PGP SIGNATURE-----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=orZI
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Compile time fixes and run-time resources leaks:
- Fix clang cross compilation
- Fix resource leak when return error
- fix compile error for dma_map_benchmark
- Fix regression - make use of GUP_TEST_FILE macro"
* tag 'linux-kselftest-fixes-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: make use of GUP_TEST_FILE macro
selftests: vm: Fix resource leak when return error
selftests dma: fix compile error for dma_map_benchmark
selftests: Fix clang cross compilation
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Use get_random_u32() instead of prandom_u32_state() in nft_meta
and nft_numgen, from Florian Westphal.
2) Incorrect list head in nfnetlink_cttimeout in recent update coming
from previous development cycle. Also from Florian.
3) Incorrect path to pktgen scripts for nft_concat_range.sh selftest.
From Jie2x Zhou.
4) Two fixes for the for nft_fwd and nft_dup egress support, from Florian.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_dup_netdev: add and use recursion counter
netfilter: nf_dup_netdev: do not push mac header a second time
selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh
netfilter: cttimeout: fix slab-out-of-bounds read typo in cttimeout_net_exit
netfilter: use get_random_u32 instead of prandom
====================
Link: https://lore.kernel.org/r/20220621085618.3975-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, kvm-check-branches.sh causes each kvm.sh invocation create a
separate date-stamped directory, then after that invocation completes,
moves it into the *-group/NNNN directory. This works, but makes it more
difficult to monitor an ongoing run. This commit therefore uses the
kvm.sh --datestamp argument to make kvm.sh put the output in the right
place to start with, and also dispenses with the additional level of
datestamping. (Those wanting datestamps can find them in the log files.)
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
A recent change to the DEBUG_INFO Kconfig option means that simply adding
CONFIG_DEBUG_INFO=y to the .config file and running "make oldconfig" no
longer works. It is instead necessary to add CONFIG_DEBUG_INFO_NONE=n
and (for example) CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y.
This combination will then result in CONFIG_DEBUG_INFO being selected.
This commit therefore updates the Kconfig options produced in response
to the kvm.sh --gdb, --kasan, and --kcsan Kconfig options.
Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Before change:
make -C netfilter
TEST: performance
net,port [SKIP]
perf not supported
port,net [SKIP]
perf not supported
net6,port [SKIP]
perf not supported
port,proto [SKIP]
perf not supported
net6,port,mac [SKIP]
perf not supported
net6,port,mac,proto [SKIP]
perf not supported
net,mac [SKIP]
perf not supported
After change:
net,mac [ OK ]
baseline (drop from netdev hook): 2061098pps
baseline hash (non-ranged entries): 1606741pps
baseline rbtree (match on first field only): 1191607pps
set with 1000 full, ranged entries: 1639119pps
ok 8 selftests: netfilter: nft_concat_range.sh
Fixes: 611973c1e0 ("selftests: netfilter: Introduce tests for sets with range concatenation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jie2x Zhou <jie2x.zhou@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Two new test BPF programs for test_prog selftests checking bpf_loop
behavior. Both are corner cases for bpf_loop inlinig transformation:
- check that bpf_loop behaves correctly when callback function is not
a compile time constant
- check that local function variables are not affected by allocating
additional stack storage for registers spilled by loop inlining
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20220620235344.569325-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A number of test cases for BPF selftests test_verifier to check how
bpf_loop inline transformation rewrites the BPF program. The following
cases are covered:
- happy path
- no-rewrite when flags is non-zero
- no-rewrite when callback is non-constant
- subprogno in insn_aux is updated correctly when dead sub-programs
are removed
- check that correct stack offsets are assigned for spilling of R6-R8
registers
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20220620235344.569325-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BTF and func_info specification for test_verifier tests follows
the same notation as in prog_tests/btf.c tests. E.g.:
...
.func_info = { { 0, 6 }, { 8, 7 } },
.func_info_cnt = 2,
.btf_strings = "\0int\0",
.btf_types = {
BTF_TYPE_INT_ENC(1, BTF_INT_SIGNED, 0, 32, 4),
BTF_PTR_ENC(1),
},
...
The BTF specification is loaded only when specified.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20220620235344.569325-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allows to specify expected and unexpected instruction sequences in
test_verifier test cases. The instructions are requested from kernel
after BPF program loading, thus allowing to check some of the
transformations applied by BPF verifier.
- `expected_insn` field specifies a sequence of instructions expected
to be found in the program;
- `unexpected_insn` field specifies a sequence of instructions that
are not expected to be found in the program;
- `INSN_OFF_MASK` and `INSN_IMM_MASK` values could be used to mask
`off` and `imm` fields.
- `SKIP_INSNS` could be used to specify that some instructions in the
(un)expected pattern are not important (behavior similar to usage of
`\t` in `errstr` field).
The intended usage is as follows:
{
"inline simple bpf_loop call",
.insns = {
/* main */
BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2,
BPF_PSEUDO_FUNC, 0, 6),
...
BPF_EXIT_INSN(),
/* callback */
BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
BPF_EXIT_INSN(),
},
.expected_insns = {
BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
SKIP_INSNS(),
BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, BPF_PSEUDO_CALL, 8, 1)
},
.unexpected_insns = {
BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0,
INSN_OFF_MASK, INSN_IMM_MASK),
},
.prog_type = BPF_PROG_TYPE_TRACEPOINT,
.result = ACCEPT,
.runs = 0,
},
Here it is expected that move of 1 to register 1 would remain in place
and helper function call instruction would be replaced by a relative
call instruction.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20220620235344.569325-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use exception fixup to verify VMCALL/RDMSR/WRMSR fault as expected in the
Hyper-V Features test.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220608224516.3788274-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a remote system fails in certain ways, for example, if it is rebooted
without removing the contents of the /tmp directory, its remote.run file
never will be removed and the kvm-remote.sh script will loop waiting
forever. The manual workaround for this (hopefully!) rare event is to
manually remove the file, which will cause the results up to the reboot
to be collected and evaluated.
Unfortunately, to work out which system is holding things up, the user
must refer to the name of the last system whose results were collected,
then look up the name of the next system in sequence, then manually
remove the remote.run file. Even more unfortunately, this procedure can
be fooled in runs where each system handles more than one batch should
a given system take longer than expected, causing the systems to be
handled out of order.
This commit therefore causes kvm-remote.sh to print out the name of
the system it will wait on next, allowing the user to refer directly
to that name. Making the kvm-remote.sh script automatically handle
unscheduled termination of the qemu processes is left as future work.
Quite possibly deep future work.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Explicitly do all setup at every stage of the Hyper-V Features test, e.g.
set the MSR/hypercall, enable capabilities, etc... Now that the VM is
recreated for every stage, values that are written into the VM's address
space, i.e. shared with the guest, are reset between sub-tests, as are
any capabilities, etc...
Fix the hypercall params as well, which were broken in the same rework.
The "hcall" struct/pointer needs to point at the hcall_params object, not
the set of hypercall pages.
The goofs were hidden by the test's dubious behavior of using '0' to
signal "done", i.e. the MSR test ran exactly one sub-test, and the
hypercall test was a gigantic nop.
Fixes: 6c1186430a ("KVM: selftests: Avoid KVM_SET_CPUID2 after KVM_RUN in hyperv_features test")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220608224516.3788274-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add x86-64 support for exception fixup on single instructions, without
forcing tests to install their own fault handlers. Use registers r9-r11
to flag the instruction as "safe" and pass fixup/vector information,
i.e. introduce yet another flavor of fixup (versus the kernel's in-memory
tables and KUT's per-CPU area) to take advantage of KVM sefltests being
64-bit only.
Using only registers avoids the need to allocate fixup tables, ensure
FS or GS base is valid for the guest, ensure memory is mapped into the
guest, etc..., and also reduces the potential for recursive faults due to
accessing memory.
Providing exception fixup trivializes tests that just want to verify that
an instruction faults, e.g. no need to track start/end using global
labels, no need to install a dedicated handler, etc...
Deliberately do not support #DE in exception fixup so that the fixup glue
doesn't need to account for a fault with vector == 0, i.e. the vector can
also indicate that a fault occurred. KVM injects #DE only for esoteric
emulation scenarios, i.e. there's very, very little value in testing #DE.
Force any test that wants to generate #DEs to install its own handler(s).
Use kvm_pv_test as a guinea pig for the new fixup, as it has a very
straightforward use case of wanting to verify that RDMSR and WRMSR fault.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220608224516.3788274-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit adds the kernel config options needed to run the recently
added xdp_synproxy test. Users without these options will hit errors
like this:
test_synproxy:FAIL:iptables -t raw -I PREROUTING -i tmp1 -p
tcp -m tcp --syn --dport 8080 -j CT --notrack unexpected error: 256
(errno 22)
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220620104939.4094104-1-maximmi@nvidia.com
Commit 8ff978b8b2 ("ipv4/raw: support binding to nonlocal addresses")
introduces support for binding to nonlocal addresses, as well as some
basic test coverage for some of the related cases.
Commit b4a028c4d0 ("ipv4: ping: fix bind address validity check")
fixes a regression which incorrectly removed some checks for bind
address validation. In addition, it introduces regression tests for
those specific checks. However, those regression tests are defective, in
that they perform the tests using an incorrect combination of bind
flags. As a result, those tests fail when they should succeed.
This commit introduces additional regression tests for nonlocal binding
and fixes the defective regression tests. It also introduces new
set_sysctl calls for the ipv4_bind test group, as to perform the ICMP
binding tests it is necessary to allow ICMP socket creation by setting
the net.ipv4.ping_group_range knob.
Fixes: b4a028c4d0 ("ipv4: ping: fix bind address validity check")
Reported-by: Riccardo Paolo Bestetti <pbl@bestov.io>
Signed-off-by: Riccardo Paolo Bestetti <pbl@bestov.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-06-17
We've added 72 non-merge commits during the last 15 day(s) which contain
a total of 92 files changed, 4582 insertions(+), 834 deletions(-).
The main changes are:
1) Add 64 bit enum value support to BTF, from Yonghong Song.
2) Implement support for sleepable BPF uprobe programs, from Delyan Kratunov.
3) Add new BPF helpers to issue and check TCP SYN cookies without binding to a
socket especially useful in synproxy scenarios, from Maxim Mikityanskiy.
4) Fix libbpf's internal USDT address translation logic for shared libraries as
well as uprobe's symbol file offset calculation, from Andrii Nakryiko.
5) Extend libbpf to provide an API for textual representation of the various
map/prog/attach/link types and use it in bpftool, from Daniel Müller.
6) Provide BTF line info for RV64 and RV32 JITs, and fix a put_user bug in the
core seen in 32 bit when storing BPF function addresses, from Pu Lehui.
7) Fix libbpf's BTF pointer size guessing by adding a list of various aliases
for 'long' types, from Douglas Raillard.
8) Fix bpftool to readd setting rlimit since probing for memcg-based accounting
has been unreliable and caused a regression on COS, from Quentin Monnet.
9) Fix UAF in BPF cgroup's effective program computation triggered upon BPF link
detachment, from Tadeusz Struk.
10) Fix bpftool build bootstrapping during cross compilation which was pointing
to the wrong AR process, from Shahab Vahedi.
11) Fix logic bug in libbpf's is_pow_of_2 implementation, from Yuze Chi.
12) BPF hash map optimization to avoid grabbing spinlocks of all CPUs when there
is no free element. Also add a benchmark as reproducer, from Feng Zhou.
13) Fix bpftool's codegen to bail out when there's no BTF, from Michael Mullin.
14) Various minor cleanup and improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpf: Fix bpf_skc_lookup comment wrt. return type
bpf: Fix non-static bpf_func_proto struct definitions
selftests/bpf: Don't force lld on non-x86 architectures
selftests/bpf: Add selftests for raw syncookie helpers in TC mode
bpf: Allow the new syncookie helpers to work with SKBs
selftests/bpf: Add selftests for raw syncookie helpers
bpf: Add helpers to issue and check SYN cookies in XDP
bpf: Allow helpers to accept pointers with a fixed size
bpf: Fix documentation of th_len in bpf_tcp_{gen,check}_syncookie
selftests/bpf: add tests for sleepable (uk)probes
libbpf: add support for sleepable uprobe programs
bpf: allow sleepable uprobe programs to attach
bpf: implement sleepable uprobes by chaining gps
bpf: move bpf_prog to bpf.h
libbpf: Fix internal USDT address translation logic for shared libraries
samples/bpf: Check detach prog exist or not in xdp_fwd
selftests/bpf: Avoid skipping certain subtests
selftests/bpf: Fix test_varlen verification failure with latest llvm
bpftool: Do not check return value from libbpf_set_strict_mode()
Revert "bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"
...
====================
Link: https://lore.kernel.org/r/20220617220836.7373-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2022-06-17
We've added 12 non-merge commits during the last 4 day(s) which contain
a total of 14 files changed, 305 insertions(+), 107 deletions(-).
The main changes are:
1) Fix x86 JIT tailcall count offset on BPF-2-BPF call, from Jakub Sitnicki.
2) Fix a kprobe_multi link bug which misplaces BPF cookies, from Jiri Olsa.
3) Fix an infinite loop when processing a module's BTF, from Kumar Kartikeya Dwivedi.
4) Fix getting a rethook only in RCU available context, from Masami Hiramatsu.
5) Fix request socket refcount leak in sk lookup helpers, from Jon Maxwell.
6) Fix xsk xmit behavior which wrongly adds skb to already full cq, from Ciara Loftus.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
rethook: Reject getting a rethook if RCU is not watching
fprobe, samples: Add use_trace option and show hit/missed counter
bpf, docs: Update some of the JIT/maintenance entries
selftest/bpf: Fix kprobe_multi bench test
bpf: Force cookies array to follow symbols sorting
ftrace: Keep address offset in ftrace_lookup_symbols
selftests/bpf: Shuffle cookies symbols in kprobe multi test
selftests/bpf: Test tail call counting with bpf2bpf and data on stack
bpf, x86: Fix tail call count offset calculation on bpf2bpf call
bpf: Limit maximum modifier chain length in btf_check_type_tags
bpf: Fix request_sock leak in sk lookup helpers
xsk: Fix generic transmit when completion queue reservation fails
====================
Link: https://lore.kernel.org/r/20220617202119.2421-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 8ff978b8b2 ("ipv4/raw: support binding to nonlocal addresses")
introduced a helper function to fold duplicated validity checks of bind
addresses into inet_addr_valid_or_nonlocal(). However, this caused an
unintended regression in ping_check_bind_addr(), which previously would
reject binding to multicast and broadcast addresses, but now these are
both incorrectly allowed as reported in [1].
This patch restores the original check. A simple reordering is done to
improve readability and make it evident that multicast and broadcast
addresses should not be allowed. Also, add an early exit for INADDR_ANY
which replaces lost behavior added by commit 0ce779a9f5 ("net: Avoid
unnecessary inet_addr_type() call when addr is INADDR_ANY").
Furthermore, this patch introduces regression selftests to catch these
specific cases.
[1] https://lore.kernel.org/netdev/CANP3RGdkAcDyAZoT1h8Gtuu0saq+eOrrTiWbxnOs+5zn+cpyKg@mail.gmail.com/
Fixes: 8ff978b8b2 ("ipv4/raw: support binding to nonlocal addresses")
Cc: Miaohe Lin <linmiaohe@huawei.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Riccardo Paolo Bestetti <pbl@bestov.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of hard coding the scale target in the test, dynamically set it
based on the maximum number of flow counters and their current
occupancy.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This tests creates as many RIFs as possible, ideally more than there can be
RIF counters (though that is currently only possible on Spectrum-1). It
then tries to enable L3 HW stats on each of the RIFs. It also contains the
traffic test, which tries to run traffic through a log2 of those counters
and checks that the traffic is shown in the counter values.
Like with tc_flower traffic test, take a log2 subset of rules. The logic
behind picking log2 rules is that then every bit of the instantiated item's
number is exercised. This should catch issues whether they happen at the
high end, low end, or somewhere in between.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that checks that the created filters do actually trigger on
matching traffic.
Exercising all the rules would be a very lengthy process. Instead, take a
log2 subset of rules. The logic behind picking log2 rules is that then
every bit of the instantiated item's number is exercised. This should catch
issues whether they happen at the high end, low end, or somewhere in
between.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The scale tests are verifying behavior of mlxsw when number of instances of
some resource reaches the ASIC capacity. The number of instances is
referred to as "target" number.
No scale tests so far needed to know this target number to clean up. E.g.
the tc_flower simply removes the clsact qdisc that all the tested filters
are hooked onto, and that takes care of collecting all the filters.
However, for the RIF counter test, which is being added in a future patch,
VLAN netdevices are created. These are created as part of the test, but of
course the cleanup needs to undo them again. For that it needs to know how
many there were. To support this usage, pass the target number to the
cleanup callback.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The scale tests are currently testing two things: that some number of
instances of a given resource can actually be created; and that when an
attempt is made to create more than the supported amount, the failures are
noted and handled gracefully.
Sometimes the scale test depends on more than one resource. In particular,
a following patch will add a RIF counter scale test, which depends on the
number of RIF counters that can be bound, and also on the number of RIFs
that can be created.
When the test is limited by the auxiliary resource and not by the primary
one, there's no point trying to run the overflow test, because it would be
testing exhaustion of the wrong resource.
To support this use case, when the $test_get_target yields 0, skip the test
instead.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The scale tests are currently testing two things: that some number of
instances of a given resource can actually be created; and that when an
attempt is made to create more than the supported amount, the failures are
noted and handled gracefully.
However the ability to allocate the resource does not mean that the
resource actually works when passing traffic. For that, make it possible
for a given scale to also test traffic.
Traffic test is only run on the positive leg of the scale test (no point
trying to pass traffic when the expected outcome is that the resource will
not be allocated). Traffic tests are opt-in, if a given test does not
expose it, it is not run.
To this end, delay the test cleanup until after the traffic test is run.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The scale of each resource is tested in the following manner:
1. The scale target is queried.
2. The test setup is prepared.
3. The test is invoked.
In some cases, the occupancy of a resource changes as part of the second
step, requiring the test to return a scale target that takes this change
into account.
Make this more robust by re-querying the scale target after the second
step.
Another possible solution is to swap the first and second steps, but
when a test needs to be skipped (i.e., scale target is zero), the setup
would have been in vain.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using mlxsw driver, the configurations are offloaded just in case that
there is a physical port which is enslaved to the virtual device
(e.g., to a bridge). In 'mirror_gre_bridge_1q_lag' test, the bridge gets an
address and route before there are ports in the bridge. It means that these
configurations are not offloaded.
Till now the test passes with mlxsw driver even that the RIF of the
bridge is not in the hardware, because the ARP packets are trapped in
layer 2 and also mirrored, so there is no real need of the RIF in hardware.
The previous patch changed the traps 'ARP_REQUEST' and 'ARP_RESPONSE' to
be done at layer 3 instead of layer 2. With this change the ARP packets are
not trapped during the test, as the RIF is not in the hardware because of
the order of configurations.
Reorder the configurations to make them to be offloaded, then the test will
pass with the change of the traps.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
LLVM's lld linker doesn't have a universal architecture support (e.g.,
it definitely doesn't work on s390x), so be safe and force lld for
urandom_read and liburandom_read.so only on x86 architectures.
This should fix s390x CI runs.
Fixes: 3e6fe5ce4d ("libbpf: Fix internal USDT address translation logic for shared libraries")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220617045512.1339795-1-andrii@kernel.org
This commit extends selftests for the new BPF helpers
bpf_tcp_raw_{gen,check}_syncookie_ipv{4,6} to also test the TC BPF
functionality added in the previous commit.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220615134847.3753567-7-maximmi@nvidia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds selftests for the new BPF helpers:
bpf_tcp_raw_{gen,check}_syncookie_ipv{4,6}.
xdp_synproxy_kern.c is a BPF program that generates SYN cookies on
allowed TCP ports and sends SYNACKs to clients, accelerating synproxy
iptables module.
xdp_synproxy.c is a userspace control application that allows to
configure the following options in runtime: list of allowed ports, MSS,
window scale, TTL.
A selftest is added to prog_tests that leverages the above programs to
test the functionality of the new helpers.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220615134847.3753567-5-maximmi@nvidia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test for the renameat2 RENAME_EXCHANGE support in vfat, but split it
in a tool that just does the rename exchange and a script that is run by
the kselftests framework on `make TARGETS="filesystems/fat" kselftest`.
That way the script can be easily extended to test other file operations.
The script creates a 1 MiB disk image, that is then formated with a vfat
filesystem and mounted using a loop device. That way all file operations
are done on an ephemeral filesystem.
Link: https://lkml.kernel.org/r/20220610075721.1182745-5-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Alexander Larsson <alexl@redhat.com>
Cc: Christian Kellner <ckellner@redhat.com>
Cc: Chung-Chiang Cheng <cccheng@synology.com>
Cc: Colin Walters <walters@verbum.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 17de1e559c ("selftests: clarify common error when running
gup_test") had most of its hunks dropped due to a conflict with another
patch accepted into Linux around the same time that implemented the same
behavior as a subset of other changes.
However, the remaining hunk defines the GUP_TEST_FILE macro without making
use of it. This patch makes use of the macro in the two relevant places.
Furthermore, the above mentioned commit's log message erroneously
describes the changes that were dropped from the patch.
This patch corrects the record.
Link: https://lkml.kernel.org/r/20220609203217.3206247-1-jsavitz@redhat.com
Fixes: 17de1e559c ("selftests: clarify common error when running gup_test")
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With [1] the available_filter_functions file contains records
starting with __ftrace_invalid_address___ and marking disabled
entries.
We need to filter them out for the bench test to pass only
resolvable symbols to kernel.
[1] commit b39181f7c6 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function")
Fixes: b39181f7c6 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220615112118.497303-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There's a kernel bug that causes cookies to be misplaced and
the reason we did not catch this with this test is that we
provide bpf_fentry_test* functions already sorted by name.
Shuffling function bpf_fentry_test2 deeper in the list and
keeping the current cookie values as before will trigger
the bug.
The kernel fix is coming in following changes.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220615112118.497303-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests that ensure sleepable uprobe programs work correctly.
Add tests that ensure sleepable kprobe programs cannot attach.
Also add tests that attach both sleepable and non-sleepable
uprobe programs to the same location (i.e. same bpf_prog_array).
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Link: https://lore.kernel.org/r/c744e5bb7a5c0703f05444dc41f2522ba3579a48.1655248076.git.delyank@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Perform the same virtual address to file offset translation that libbpf
is doing for executable ELF binaries also for shared libraries.
Currently libbpf is making a simplifying and sometimes wrong assumption
that for shared libraries relative virtual addresses inside ELF are
always equal to file offsets.
Unfortunately, this is not always the case with LLVM's lld linker, which
now by default generates quite more complicated ELF segments layout.
E.g., for liburandom_read.so from selftests/bpf, here's an excerpt from
readelf output listing ELF segments (a.k.a. program headers):
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
PHDR 0x000040 0x0000000000000040 0x0000000000000040 0x0001f8 0x0001f8 R 0x8
LOAD 0x000000 0x0000000000000000 0x0000000000000000 0x0005e4 0x0005e4 R 0x1000
LOAD 0x0005f0 0x00000000000015f0 0x00000000000015f0 0x000160 0x000160 R E 0x1000
LOAD 0x000750 0x0000000000002750 0x0000000000002750 0x000210 0x000210 RW 0x1000
LOAD 0x000960 0x0000000000003960 0x0000000000003960 0x000028 0x000029 RW 0x1000
Compare that to what is generated by GNU ld (or LLVM lld's with extra
-znoseparate-code argument which disables this cleverness in the name of
file size reduction):
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000000 0x0000000000000000 0x0000000000000000 0x000550 0x000550 R 0x1000
LOAD 0x001000 0x0000000000001000 0x0000000000001000 0x000131 0x000131 R E 0x1000
LOAD 0x002000 0x0000000000002000 0x0000000000002000 0x0000ac 0x0000ac R 0x1000
LOAD 0x002dc0 0x0000000000003dc0 0x0000000000003dc0 0x000262 0x000268 RW 0x1000
You can see from the first example above that for executable (Flg == "R E")
PT_LOAD segment (LOAD #2), Offset doesn't match VirtAddr columns.
And it does in the second case (GNU ld output).
This is important because all the addresses, including USDT specs,
operate in a virtual address space, while kernel is expecting file
offsets when performing uprobe attach. So such mismatches have to be
properly taken care of and compensated by libbpf, which is what this
patch is fixing.
Also patch clarifies few function and variable names, as well as updates
comments to reflect this important distinction (virtaddr vs file offset)
and to ephasize that shared libraries are not all that different from
executables in this regard.
This patch also changes selftests/bpf Makefile to force urand_read and
liburand_read.so to be built with Clang and LLVM's lld (and explicitly
request this ELF file size optimization through -znoseparate-code linker
parameter) to validate libbpf logic and ensure regressions don't happen
in the future. I've bundled these selftests changes together with libbpf
changes to keep the above description tied with both libbpf and
selftests changes.
Fixes: 74cc6311ce ("libbpf: Add USDT notes parsing and resolution logic")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220616055543.3285835-1-andrii@kernel.org
Commit 17de1e559c ("selftests: clarify common error when running
gup_test") had most of its hunks dropped due to a conflict with another
patch accepted into Linux around the same time that implemented the same
behavior as a subset of other changes.
However, the remaining hunk defines the GUP_TEST_FILE macro without
making use of it. This patch makes use of the macro in the two relevant
places.
Furthermore, the above mentioned commit's log message erroneously describes
the changes that were dropped from the patch.
This patch corrects the record.
Fixes: 17de1e559c ("selftests: clarify common error when running gup_test")
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Nico Pache <npache@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When return on an error path, file handle need to be closed
to prevent resource leak
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building selftests/dma:
$ make -C tools/testing/selftests TARGETS=dma
I hit the following compilation error:
dma_map_benchmark.c:13:10: fatal error: linux/map_benchmark.h: No such file or directory
#include <linux/map_benchmark.h>
^~~~~~~~~~~~~~~~~~~~~~~
dma/Makefile does not include the map_benchmark.h path, so add
more including path, and fix include order in dma_map_benchmark.c
Fixes: 8ddde07a3d ("dma-mapping: benchmark: extract a common header file for map_benchmark definition")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cover the case when tail call count needs to be passed from BPF function to
BPF function, and the caller has data on stack. Specifically when the size
of data allocated on BPF stack is not a multiple on 8.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220616162037.535469-3-jakub@cloudflare.com
Current release - regressions:
- Revert "net: Add a second bind table hashed by port and address",
needs more work
- amd-xgbe: use platform_irq_count(), static setup of IRQ resources
had been removed from DT core
- dts: at91: ksz9477_evb: add phy-mode to fix port/phy validation
Current release - new code bugs:
- hns3: modify the ring param print info
Previous releases - always broken:
- axienet: make the 64b addressable DMA depends on 64b architectures
- iavf: fix issue with MAC address of VF shown as zero
- ice: fix PTP TX timestamp offset calculation
- usb: ax88179_178a needs FLAG_SEND_ZLP
Misc:
- document some net.sctp.* sysctls
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JSV9
-----END PGP SIGNATURE-----
Merge tag 'net-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Mostly driver fixes.
Current release - regressions:
- Revert "net: Add a second bind table hashed by port and address",
needs more work
- amd-xgbe: use platform_irq_count(), static setup of IRQ resources
had been removed from DT core
- dts: at91: ksz9477_evb: add phy-mode to fix port/phy validation
Current release - new code bugs:
- hns3: modify the ring param print info
Previous releases - always broken:
- axienet: make the 64b addressable DMA depends on 64b architectures
- iavf: fix issue with MAC address of VF shown as zero
- ice: fix PTP TX timestamp offset calculation
- usb: ax88179_178a needs FLAG_SEND_ZLP
Misc:
- document some net.sctp.* sysctls"
* tag 'net-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits)
net: axienet: add missing error return code in axienet_probe()
Revert "net: Add a second bind table hashed by port and address"
net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg
net: usb: ax88179_178a needs FLAG_SEND_ZLP
MAINTAINERS: add include/dt-bindings/net to NETWORKING DRIVERS
ARM: dts: at91: ksz9477_evb: fix port/phy validation
net: bgmac: Fix an erroneous kfree() in bgmac_remove()
ice: Fix memory corruption in VF driver
ice: Fix queue config fail handling
ice: Sync VLAN filtering features for DVM
ice: Fix PTP TX timestamp offset calculation
mlxsw: spectrum_cnt: Reorder counter pools
docs: networking: phy: Fix a typo
amd-xgbe: Use platform_irq_count()
octeontx2-vf: Add support for adaptive interrupt coalescing
xilinx: Fix build on x86.
net: axienet: Use iowrite64 to write all 64b descriptor pointers
net: axienet: make the 64b addresable DMA depends on 64b archectures
net: hns3: fix tm port shapping of fibre port is incorrect after driver initialization
net: hns3: fix PF rss size initialization bug
...
* check that a child process is in parent's time namespace after vfork.
* check that a child process is in the target namespace after exec.
Output on success:
$ ./vfork_exec
1..1
ok 1 exec
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220613060723.197407-2-avagin@gmail.com
Fix the inverted logic of the memop extension capability check.
Fixes: 97da92c0ff ("KVM: s390: selftests: Use TAP interface in the memop test")
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Message-Id: <20220614162635.3445019-1-scgl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are some parameter being removed in function but the parameter
comments still exist, so remove them.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Message-Id: <20220614224126.211054-1-shaoqin.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 704c91e59f ('selftests/bpf: Test "bpftool gen min_core_btf"')
added a test test_core_btfgen to test core relocation with btf
generated with 'bpftool gen min_core_btf'. Currently,
among 76 subtests, 25 are skipped.
...
#46/69 core_reloc_btfgen/enumval:OK
#46/70 core_reloc_btfgen/enumval___diff:OK
#46/71 core_reloc_btfgen/enumval___val3_missing:OK
#46/72 core_reloc_btfgen/enumval___err_missing:SKIP
#46/73 core_reloc_btfgen/enum64val:OK
#46/74 core_reloc_btfgen/enum64val___diff:OK
#46/75 core_reloc_btfgen/enum64val___val3_missing:OK
#46/76 core_reloc_btfgen/enum64val___err_missing:SKIP
...
#46 core_reloc_btfgen:SKIP
Summary: 1/51 PASSED, 25 SKIPPED, 0 FAILED
Alexei found that in the above core_reloc_btfgen/enum64val___err_missing
should not be skipped.
Currently, the core_reloc tests have some negative tests.
In Commit 704c91e59f, for core_reloc_btfgen, all negative tests
are skipped with the following condition
if (!test_case->btf_src_file || test_case->fails) {
test__skip();
continue;
}
This is too conservative. Negative tests do not fail
mkstemp() and run_btfgen() should not be skipped.
There are a few negative tests indeed failing run_btfgen()
and this patch added 'run_btfgen_fails' to mark these tests
so that they can be skipped for btfgen tests. With this,
we have
...
#46/69 core_reloc_btfgen/enumval:OK
#46/70 core_reloc_btfgen/enumval___diff:OK
#46/71 core_reloc_btfgen/enumval___val3_missing:OK
#46/72 core_reloc_btfgen/enumval___err_missing:OK
#46/73 core_reloc_btfgen/enum64val:OK
#46/74 core_reloc_btfgen/enum64val___diff:OK
#46/75 core_reloc_btfgen/enum64val___val3_missing:OK
#46/76 core_reloc_btfgen/enum64val___err_missing:OK
...
Summary: 1/62 PASSED, 14 SKIPPED, 0 FAILED
Totally 14 subtests are skipped instead of 25.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220614055526.628299-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Unlike GCC clang uses a single compiler image to support multiple target
architectures meaning that we can't simply rely on CROSS_COMPILE to select
the output architecture. Instead we must pass --target to the compiler to
tell it what to output, kselftest was not doing this so cross compilation
of kselftest using clang resulted in kselftest being built for the host
architecture.
More work is required to fix tests using custom rules but this gets the
bulk of things building.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Replace calls to kvm_check_cap() that treat its return as a boolean with
calls to kvm_has_cap(). Several instances of kvm_check_cap() were missed
when kvm_has_cap() was introduced.
Reported-by: Andrew Jones <drjones@redhat.com>
Fixes: 3ea9b80965 ("KVM: selftests: Add kvm_has_cap() to provide syntactic sugar")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613161942.1586791-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a duplicate TEST_ASSERT() on the number of runnable vCPUs in
vm_nr_pages_required() that snuck in during a rebase gone bad.
Reported-by: Andrew Jones <drjones@redhat.com>
Fixes: 6e1d13bf38 ("KVM: selftests: Move per-VM/per-vCPU nr pages calculation to __vm_create()")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613161942.1586791-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the goofy static_assert on the size of the @vm/@vcpu parameters
with a call to a dummy helper, i.e. let the compiler naturally complain
about an incompatible type instead of homebrewing a poor replacement.
Reported-by: Andrew Jones <drjones@redhat.com>
Fixes: fcba483e82 ("KVM: selftests: Sanity check input to ioctls() at build time")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613161942.1586791-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an apostrophe in a comment about it being the caller's, not callers,
responsibility to free an object.
Reported-by: Andrew Jones <drjones@redhat.com>
Fixes: 768e9a6185 ("KVM: selftests: Purge vm+vcpu_id == vcpu silliness")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613161942.1586791-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_binary_stats_test accepts two arguments, the number of vms
and number of vcpus. If these inputs are not equal then the
test would likely crash for one reason or another due to using
miscalculated indices for the vcpus array. Fix the index
expressions by swapping the use of i and j.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20220614081041.2571511-1-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Properly reset the SVE/SME flags on vcpu load
* Fix a vgic-v2 regression regarding accessing the pending
state of a HW interrupt from userspace (and make the code
common with vgic-v3)
* Fix access to the idreg range for protected guests
* Ignore 'kvm-arm.mode=protected' when using VHE
* Return an error from kvm_arch_init_vm() on allocation failure
* A bunch of small cleanups (comments, annotations, indentation)
RISC-V:
* Typo fix in arch/riscv/kvm/vmid.c
* Remove broken reference pattern from MAINTAINERS entry
x86-64:
* Fix error in page tables with MKTME enabled
* Dirty page tracking performance test extended to running a nested
guest
* Disable APICv/AVIC in cases that it cannot implement correctly
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKjTIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNhPQgAiIVtp8aepujUM/NhkNyK3SIdLzlS
oZCZiS6bvaecKXi/QvhBU0EBxAEyrovk3lmVuYNd41xI+PDjyaA4SDIl5DnToGUw
bVPNFSYqjpF939vUUKjc0RCdZR4o5g3Od3tvWoHTHviS1a8aAe5o9pcpHpD0D6Mp
Gc/o58nKAOPl3htcFKmjymqo3Y6yvkJU9NB7DCbL8T5mp5pJ959Mw1/LlmBaAzJC
OofrynUm4NjMyAj/mAB1FhHKFyQfjBXLhiVlS0SLiiEA/tn9/OXyVFMKG+n5VkAZ
Q337GMFe2RikEIuMEr3Rc4qbZK3PpxHhaj+6MPRuM0ho/P4yzl2Nyb/OhA==
=h81Q
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"While last week's pull request contained miscellaneous fixes for x86,
this one covers other architectures, selftests changes, and a bigger
series for APIC virtualization bugs that were discovered during 5.20
development. The idea is to base 5.20 development for KVM on top of
this tag.
ARM64:
- Properly reset the SVE/SME flags on vcpu load
- Fix a vgic-v2 regression regarding accessing the pending state of a
HW interrupt from userspace (and make the code common with vgic-v3)
- Fix access to the idreg range for protected guests
- Ignore 'kvm-arm.mode=protected' when using VHE
- Return an error from kvm_arch_init_vm() on allocation failure
- A bunch of small cleanups (comments, annotations, indentation)
RISC-V:
- Typo fix in arch/riscv/kvm/vmid.c
- Remove broken reference pattern from MAINTAINERS entry
x86-64:
- Fix error in page tables with MKTME enabled
- Dirty page tracking performance test extended to running a nested
guest
- Disable APICv/AVIC in cases that it cannot implement correctly"
[ This merge also fixes a misplaced end parenthesis bug introduced in
commit 3743c2f025 ("KVM: x86: inhibit APICv/AVIC on changes to APIC
ID or APIC base") pointed out by Sean Christopherson ]
Link: https://lore.kernel.org/all/20220610191813.371682-1-seanjc@google.com/
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits)
KVM: selftests: Restrict test region to 48-bit physical addresses when using nested
KVM: selftests: Add option to run dirty_log_perf_test vCPUs in L2
KVM: selftests: Clean up LIBKVM files in Makefile
KVM: selftests: Link selftests directly with lib object files
KVM: selftests: Drop unnecessary rule for STATIC_LIBS
KVM: selftests: Add a helper to check EPT/VPID capabilities
KVM: selftests: Move VMX_EPT_VPID_CAP_AD_BITS to vmx.h
KVM: selftests: Refactor nested_map() to specify target level
KVM: selftests: Drop stale function parameter comment for nested_map()
KVM: selftests: Add option to create 2M and 1G EPT mappings
KVM: selftests: Replace x86_page_size with PG_LEVEL_XX
KVM: x86: SVM: fix nested PAUSE filtering when L0 intercepts PAUSE
KVM: x86: SVM: drop preempt-safe wrappers for avic_vcpu_load/put
KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blocking
KVM: x86: disable preemption while updating apicv inhibition
KVM: x86: SVM: fix avic_kick_target_vcpus_fast
KVM: x86: SVM: remove avic's broken code that updated APIC ID
KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base
KVM: x86: document AVIC/APICv inhibit reasons
KVM: x86/mmu: Set memory encryption "value", not "mask", in shadow PDPTRs
...
-----BEGIN PGP SIGNATURE-----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=1Lf0
-----END PGP SIGNATURE-----
Merge tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- A fix for a 5.19 regression for a case in which early device tree
initializes the RNG, which flips a static branch.
On most plaforms, jump labels aren't initialized until much later, so
this caused splats. On a few mailing list threads, we cooked up easy
fixes for arm64, arm32, and risc-v. But then things looked slightly
more involved for xtensa, powerpc, arc, and mips. And at that point,
when we're patching 7 architectures in a place before the console is
even available, it seems like the cost/risk just wasn't worth it.
So random.c works around it now by checking the already exported
`static_key_initialized` boolean, as though somebody already ran into
this issue in the past. I'm not super jazzed about that; it'd be
prettier to not have to complicate downstream code. But I suppose
it's practical.
- A few small code nits and adding a missing __init annotation.
- A change to the default config values to use the cpu and bootloader's
seeds for initializing the RNG earlier.
This brings them into line with what all the distros do (Fedora/RHEL,
Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void... at
least), and moreover will now give us test coverage in various test
beds that might have caught the above device tree bug earlier.
- A change to WireGuard CI's configuration to increase test coverage
around the RNG.
- A documentation comment fix to unrelated maintainerless CRC code that
I was asked to take, I guess because it has to do with polynomials
(which the RNG thankfully no longer uses).
* tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
wireguard: selftests: use maximum cpu features and allow rng seeding
random: remove rng_has_arch_random()
random: credit cpu and bootloader seeds by default
random: do not use jump labels before they are initialized
random: account for arch randomness in bits
random: mark bootloader randomness code as __init
random: avoid checking crng_ready() twice in random_init()
crc-itu-t: fix typo in CRC ITU-T polynomial comment
Add benchmark for hash_map to reproduce the worst case
that non-stop update when map's free is zero.
Just like this:
./run_bench_bpf_hashmap_full_update.sh
Setting up benchmark 'bpf-hashmap-ful-update'...
Benchmark 'bpf-hashmap-ful-update' started.
1:hash_map_full_perf 555830 events per sec
...
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Link: https://lore.kernel.org/r/20220610023308.93798-3-zhoufeng.zf@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a static assert to the KVM/VM/vCPU ioctl() helpers to verify that the
size of the argument provided matches the expected size of the IOCTL.
Because ioctl() ultimately takes a "void *", it's all too easy to pass in
garbage and not detect the error until runtime. E.g. while working on a
CPUID rework, selftests happily compiled when vcpu_set_cpuid()
unintentionally passed the cpuid() function as the parameter to ioctl()
(a local "cpuid" parameter was removed, but its use was not replaced with
"vcpu->cpuid" as intended).
Tweak a variety of benign issues that aren't compatible with the sanity
check, e.g. passing a non-pointer for ioctls().
Note, static_assert() requires a string on older versions of GCC. Feed
it an empty string to make the compiler happy.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the TAP-friendly ksft_exit_skip() instead of KVM's custom print_skip()
when skipping a test via __TEST_REQUIRE. KVM's "skipping test" has no
known benefit, whereas some setups rely on TAP output.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add TEST_REQUIRE() and __TEST_REQUIRE() to replace the myriad open coded
instances of selftests exiting with KSFT_SKIP after printing an
informational message. In addition to reducing the amount of boilerplate
code in selftests, the UPPERCASE macro names make it easier to visually
identify a test's requirements.
Convert usage that erroneously uses something other than print_skip()
and/or "exits" with '0' or some other non-KSFT_SKIP value.
Intentionally drop a kvm_vm_free() in aarch64/debug-exceptions.c as part
of the conversion. All memory and file descriptors are freed on process
exit, so the explicit free is superfluous.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kvm_has_cap() to wrap kvm_check_cap() and return a bool for the use
cases where the caller only wants check if a capability is supported,
i.e. doesn't care about the value beyond whether or not it's non-zero.
The "check" terminology is somewhat ambiguous as the non-boolean return
suggests that '0' might mean "success", i.e. suggests that the ioctl uses
the 0/-errno pattern. Provide a wrapper instead of trying to find a new
name for the raw helper; the "check" terminology is derived from the name
of the ioctl, so using e.g. "get" isn't a clear win.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return an 'unsigned int' instead of a signed 'int' from kvm_check_cap(),
to make it more obvious that kvm_check_cap() can never return a negative
value due to its assertion that the return is ">= 0".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove DEFAULT_GUEST_PHY_PAGES and open code the magic number (with a
comment) in vm_nr_pages_required(). Exposing DEFAULT_GUEST_PHY_PAGES to
tests was a symptom of the VM creation APIs not cleanly supporting tests
that create runnable vCPUs, but can't do so immediately. Now that tests
don't have to manually compute the amount of memory needed for basic
operation, make it harder for tests to do things that should be handled
by the framework, i.e. force developers to improve the framework instead
of hacking around flaws in individual tests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vm->max_gfn to compute the highest gpa in vmx_apic_access_test, and
blindly trust that the highest gfn/gpa will be well above the memory
carved out for memslot0. The existing check is beyond paranoid; KVM
doesn't support CPUs with host.MAXPHYADDR < 32, and the selftests are all
kinds of hosed if memslot0 overlaps the local xAPIC, which resides above
"lower" (below 4gb) DRAM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle all memslot0 size adjustments in __vm_create(). Currently, the
adjustments reside in __vm_create_with_vcpus(), which means tests that
call vm_create() or __vm_create() directly are left to their own devices.
Some tests just pass DEFAULT_GUEST_PHY_PAGES and don't bother with any
adjustments, while others mimic the per-vCPU calculations.
For vm_create(), and thus __vm_create(), take the number of vCPUs that
will be runnable to calculate that number of per-vCPU pages needed for
memslot0. To give readers a hint that neither vm_create() nor
__vm_create() create vCPUs, name the parameter @nr_runnable_vcpus instead
of @nr_vcpus. That also gives readers a hint as to why tests that create
larger numbers of vCPUs but never actually run those vCPUs can skip
straight to the vm_create_barebones() variant.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop @num_percpu_pages from __vm_create_with_vcpus(), all callers pass
'0' and there's unlikely to be a test that allocates just enough memory
that it needs a per-CPU allocation, but not so much that it won't just do
its own memory management.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All callers of __vm_create_with_vcpus() pass DEFAULT_GUEST_PHY_PAGES for
@slot_mem_pages; drop the param and just hardcode the "default" as the
base number of pages for slot0.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop a variety of 'struct kvm_vm' accessors that wrap a single variable
now that tests can simply reference the variable directly.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop vcpu_state() now that all tests reference vcpu->run directly.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop vcpu_get() and rename vcpu_find() to vcpu_exists() to make it that
much harder for a test to give meaning to a vCPU ID. I.e. force tests to
capture a vCPU when the vCPU is created.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take a vCPU directly instead of a VM+vcpu pair in all vCPU-scoped helpers
and ioctls.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Require the caller of __vm_create_with_vcpus() to provide a non-NULL
array of vCPUs now that all callers do so. It's extremely unlikely a
test will have a legitimate use case for creating a VM with vCPUs without
wanting to do something with those vCPUs, and if there is such a use case,
requiring that one-off test to provide a dummy array is a minor
annoyance.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Grab the vCPU from vm_vcpu_add() directly instead of doing vcpu_get()
after the fact. This will allow removing vcpu_get() entirely.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track vCPUs by their 'struct kvm_vcpu' object, and stop assuming that a
vCPU's ID is the same as its index when referencing a vCPU's metadata.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for taking a vCPU pointer in vCPU-scoped functions, grab
the vCPU(s) created by __vm_vcpu_add() and use the ID from the vCPU
object instead of hardcoding the ID in ioctl() invocations.
Rename init1/init2 => init0/init1 to avoid having odd/confusing code
where vcpu0 consumes init1 and vcpu1 consumes init2.
Note, this change could easily be done when the functions are converted
in the future, and/or the vcpu{0,1} vs. init{1,2} discrepancy could be
ignored, but then there would be no opportunity to poke fun at the
1-based counting scheme.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track the vCPU's 'struct kvm_vcpu' object in get-reg-list instead of
hardcoding '0' everywhere.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track vCPUs by their 'struct kvm_vcpu' object in kvm_binary_stats_test,
not by their ID. The per-vCPU helpers will soon take a vCPU instead of a
VM+vcpu_id pair.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reference vCPUs by their 'struct kvm_vcpu' object in kvm_page_table_test
instead of by their ID. This moves selftests one step closer towards
taking a 'struct kvm_vcpu *' instead of VM+vcpu_id for vCPU helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the @vcpuids parameter from VM creators now that there are no users.
Allowing tests to specify IDs was a gigantic mistake as it resulted in
tests with arbitrary and ultimately meaningless IDs that differed only
because the author used test X intead of test Y as the source for
copy+paste (the de facto standard way to create a KVM selftest).
Except for literally two tests, x86's set_boot_cpu_id and s390's resets,
tests do not and should not care about the vCPU ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop all vm_create_default*() helpers, the "default" naming turned out to
terrible as wasn't extensible (hard to have multiple defaults), was a lie
(half the settings were default, half weren't), and failed to capture
relationships between helpers, e.g. compared with the kernel's standard
underscores pattern.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vm_create_with_vcpus() in max_guest_memory_test and reference vCPUs
by their 'struct kvm_vcpu' object instead of their ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vm_create() instead of vm_create_default_with_vcpus() in
tsc_scaling_sync. The existing call doesn't create any vCPUs, and the
guest_code() entry point is set when vm_vcpu_add_default() is invoked.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tprot to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of passing around vCPU IDs. Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==1. The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage. If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert diag318_test_handler to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of passing around vCPU IDs. Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==6. The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage. If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass around a 'struct kvm_vcpu' object instead of a vCPU ID in s390's
memop test. Pass NULL for the vCPU instead of a magic '-1' ID to
indicate that an ioctl/test should be done at VM scope.
Rename "struct test_vcpu vcpu" to "struct test_info info" in order to
avoid naming collisions (this is the bulk of the diff :-( ).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass around a 'struct kvm_vcpu' object in the "resets" test instead of
referencing the vCPU by the global VCPU_ID. Rename the #define for the
vCPU's ID to ARBITRARY_NON_ZERO_VCPU_ID to make it more obvious that (a)
the value matters but (b) is otherwise arbitrary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert sync_regs_test to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of passing around vCPU IDs. Note, this
is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing
non-zero vCPU IDs is desirable for generic tests, that can be done in the
future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vm_create_with_one_vcpu to use vm_create_with_vcpus() and pass
around 'struct kvm_vcpu' objects instead of passing around vCPU IDs.
Don't bother with macros for the HALTER versus SENDER indices, the vast
majority of references don't differentiate between the vCPU roles, and
the code that does either has a comment or an explicit reference to the
role, e.g. to halter_guest_code() or sender_guest_code().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a combination of vm_create(), vm_create_with_vcpus(), and
vm_vcpu_add() to convert vgic_init from vm_create_default_with_vcpus(),
and away from referncing vCPUs by ID.
Thus continues the march toward total annihilation of "default" helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sync the next stage using the VM before said VM is potentially freed by
the TEST_STAGE_HVC_IFACE_FEAT_DISABLED stage.
Opportunistically take a double pointer in anticipation of also having to
set the new vCPU pointer once the test stops hardcoding '0' everywhere.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework vcpu_{g,s}et_reg() to provide the APIs that tests actually want to
use, and drop the three "one-off" implementations that cropped up due to
the poor API.
Ignore the handful of direct KVM_{G,S}ET_ONE_REG calls that don't fit the
APIs for one reason or another.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a combination of vm_create(), vm_create_with_vcpus(), and
vm_vcpu_add() to convert vgic_init from vm_create_default_with_vcpus(),
and away from referncing vCPUs by ID.
Thus continues the march toward total annihilation of "default" helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert triple_fault_event_test to use vm_create_with_one_vcpu() and pull
the vCPU's ID from 'struct kvm_vcpu'.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert svm_nested_soft_inject_test to use vm_create_with_one_vcpu() and
pull the vCPU's ID from 'struct kvm_vcpu'.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert arch_timer to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of requiring that the index into the
array of vCPUs for a given vCPU is also the ID of the vCPU
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert steal_time to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of requiring that the index into the
array of vCPUs for a given vCPU is also the ID of the vCPU.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a VM creator that "returns" the created vCPUs by filling the provided
array. This will allow converting multi-vCPU tests away from hardcoded
vCPU IDs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass around 'struct kvm_vcpu' objects in hardware_disable_test instead of
the VM+vcpu_id (called "index" by the test).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass around 'struct kvm_vcpu' objects in psci_test instead of relying on
global VCPU_IDs. Ideally, the test wouldn't have to manually create
vCPUs and thus care about vCPU IDs, but it's not the end of the world and
avoiding that behavior isn't guaranteed to be a net positive (an attempt
at macro shenanigans did not go very well).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework set_boot_cpu_id to pass around 'struct kvm_vcpu' objects instead
of relying on global VCPU_IDs. The test is still ugly, but that's
unavoidable since the point of the test is to verify that KVM correctly
assigns VCPU_ID==0 to be the BSP by default. This is literally one of
two KVM selftests that legitimately needs to care about the exact vCPU
IDs of the vCPUs it creates.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vm_vcpu_add() to __vm_vcpu_add(), and vm_vcpu_add_default() to
vm_vcpu_add() to show the relationship between the newly minted
vm_vcpu_add() and __vm_vcpu_add().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return the created 'struct kvm_vcpu' object from vm_vcpu_add_default(),
which cleans up a few tests and will eventually allow removing vcpu_get()
entirely.
Opportunistically rename @vcpuid to @vcpu_id to follow preferred kernel
style.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add "arch" into the name of utility functions that are declared in common
code, but (surprise!) have arch-specific implementations. Shuffle code
around so that all such helpers' declarations are bundled together.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An "unrestricted guest" is an VMX-only concept, move the relevant helper
to x86-64 code. Assume most readers can correctly convert underscores to
spaces and oppurtunistically trim the function comment.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the declaration of guest_get_vcpuid() to include/aarch64/processor.h,
it is implemented and used only by arm64.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vgic_irq to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of passing around a vCPU ID (which is
always the global VCPU_ID...).
Opportunstically align the indentation for multiple functions'
parameters.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert fix_hypercall_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert debug-exceptions to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert xapic_state_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of the raw vCPU ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track the added 'struct kvm_vcpu' object in tsc_scaling_sync instead of
relying purely on the VM + vcpu_id combination. Ideally, the test
wouldn't need to manually manage vCPUs, but the need to invoke a per-VM
ioctl before creating vCPUs is not handled by the selftests framework,
at least not yet...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert system_counter_offset_test to use vm_create_with_one_vcpu() and
pass around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert set_memory_region_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert dirty_log_test to pass around a 'struct kvm_vcpu' object instead
of using a global VCPU_ID. Note, this is a "functional" change in the
sense that the test now creates a vCPU with vcpu_id==0 instead of
vcpu_id==5. The non-zero VCPU_ID was 100% arbitrary and added little to
no validation coverage. If testing non-zero vCPU IDs is desirable for
generic tests, that can be done in the future by tweaking the VM creation
helpers.
The test still hardcodes usage of vcpu_id==0, but only for a few lines.
That wart will be removed in the not-too-distant future.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert xen_shinfo_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage. If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert xen_vmcall_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage. If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Opportunistically make the "vm" variable local, it is unused outside of
main().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_invalid_nested_guest_state to use vm_create_with_one_vcpu() and
pass around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert userspace_io_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID. Note,
this is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==1. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing non-zero
vCPU IDs is desirable for generic tests, that can be done in the future by
tweaking the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert cpuid_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunistically use vcpu_run() instead of _vcpu_run(), the test expects
KVM_RUN to succeed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert cr4_cpuid_sync_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID. Note,
this is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==1. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing non-zero
vCPU IDs is desirable for generic tests, that can be done in the future by
tweaking the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert amx_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.o
Opportunistically use vcpu_run() instead of _vcpu_run(), the test expects
KVM_RUN to succeed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace MOVE_RIP+SET_RIP with a proper helper, vcpu_skip_insn(), that is
more descriptive, doesn't subtly access local variables, and provides
type safety.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert debug_regs to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunstically drop the CLEAR_DEBUG/APPLY_DEBUG macros as they only
obfuscate the code, e.g. operating on local variables not "passed" to the
macro is all kinds of confusing.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert emulator_error_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID. Note,
this is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing non-zero
vCPU IDs is desirable for generic tests, that can be done in the future by
tweaking the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert evmcs_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage. If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run(), the test expects
KVM_RUN to succeed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert hyperv_clock to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert hyperv_features to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert hyperv_svm_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==1. The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage. If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run(), the test expects
KVM_RUN to succeed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert kvm_clock_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tsc_msrs_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_exception_with_invalid_guest_state to use
vm_create_with_one_vcpu() and pass around a 'struct kvm_vcpu' object
instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert userspace_msr_exit_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Note, this is a "functional" change in the sense that the test now
creates a vCPU with vcpu_id==0 instead of vcpu_id==1. The non-zero
VCPU_ID was 100% arbitrary and added little to no validation coverage.
If testing non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded. Fix minor coding style violations
too.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_apic_access_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunistically make the "vm" variable local, it is unused outside of
main().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_close_while_nested_test to use vm_create_with_one_vcpu() and
pass around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Note, this is a "functional" change in the sense that the test now
creates a vCPU with vcpu_id==0 instead of vcpu_id==5. The non-zero
VCPU_ID was 100% arbitrary and added little to no validation coverage.
If testing non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Opportunistically make the "vm" variable local, it is unused outside of
main().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_dirty_log_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Note, this is a "functional" change in the sense that the test now
creates a vCPU with vcpu_id==0 instead of vcpu_id==1. The non-zero
VCPU_ID was 100% arbitrary and added little to no validation coverage.
If testing non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert set_sregs_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this
is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing
non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_nested_tsc_scaling_test to use vm_create_with_one_vcpu() and
pass around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert platform_info_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert kvm_pv_test to use vm_create_with_one_vcpu() and pass arounda
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert hyperv_cpuid to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert sync_regs_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this
is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing
non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert svm_vmcall_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this
is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing
non-zero vCPU IDs is desirable for generic tests, that can be done in the
future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert svm_int_ctl_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunistically make the "vm" variable a local function variable, there
are no users outside of main().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert state_test to use vm_create_with_one_vcpu() and
vm_recreate_with_one_vcpu(), and pass around a 'struct kvm_vcpu' object
instead of using a global VCPU_ID. Note, this is a "functional" change
in the sense that the test now creates a vCPU with vcpu_id==0 instead of
vcpu_id==5. The non-zero VCPU_ID was 100% arbitrary and added little to
no validation coverage. If testing non-zero vCPU IDs is desirable for
generic tests, that can be done in the future by tweaking the VM creation
helpers.
Opportunistically use vcpu_run() instead of _vcpu_run(), the test expects
KVM_RUN to succeed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert smm_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this
is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==1. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing
non-zero vCPU IDs is desirable for generic tests, that can be done in the
future by tweaking the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run(), the test expects
KVM_RUN to succeed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert pmu_event_filter_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Rename run_vm_to_sync() to run_vcpu_to_sync() accordingly.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert mmu_role_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Note, this is a "functional" change in the sense that the test now
creates a vCPU with vcpu_id==0 instead of vcpu_id==1. The non-zero
VCPU_ID was 100% arbitrary and added little to no validation coverage.
If testing non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run() plus an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_tsc_adjust_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Note, this is a "functional" change in the sense that the test now
creates a vCPU with vcpu_id==0 instead of vcpu_id==5. The non-zero
VCPU_ID was 100% arbitrary and added little to no validation coverage.
If testing non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_set_nested_state_test to use vm_create_with_one_vcpu() and
pass around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Note, this is a "functional" change in the sense that the test now
creates a vCPU with vcpu_id==0 instead of vcpu_id==5. The non-zero
VCPU_ID was 100% arbitrary and added little to no validation coverage.
If testing non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_pmu_msrs_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_preemption_timer_test to use vm_create_with_one_vcpu() and
pass around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Note, this is a "functional" change in the sense that the test now
creates a vCPU with vcpu_id==0 instead of vcpu_id==5. The non-zero
VCPU_ID was 100% arbitrary and added little to no validation coverage.
If testing non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run(), the test expects
KVM_RUN to succeed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert xss_msr_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this
is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==1. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing
non-zero vCPU IDs is desirable for generic tests, that can be done in the
future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert rseq_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert memslot_perf_test to use __vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
This is the first of many, many steps towards eliminating VCPU_ID from
all KVM selftests, and towards eventually purging the VM+vcpu_id mess.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return the created vCPU from vm_vcpu_add() so that callers don't need to
manually retrieve the vCPU that was just added. Opportunistically drop
the "heavy" function comment, it adds a lot of lines of "code" but not
much value, e.g. it's pretty obvious that @vm is a virtual machine...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename 'struct vcpu' to 'struct kvm_vcpu' to align with 'struct kvm_vm'
in the selftest, and to give readers a hint that the struct is specific
to KVM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the "state" field of 'struct vcpu' to "run". KVM calls it "run",
the struct name is "kvm_run", etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename xapic_state_test's kvm_vcpu struct to xapic_vcpu to avoid a
collision when the common 'struct vcpu' is renamed to 'struct kvm_vcpu'
in a future patch.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add ____vm_create() to be the innermost helper, and turn vm_create() into
a wrapper the specifies VM_MODE_DEFAULT. Most of the vm_create() callers
just want the default mode, or more accurately, don't care about the mode.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vm_create_without_vcpus() to vm_create() so that it's not
misconstrued as helper that creates a VM that can never have vCPUs, as
opposed to a helper that "just" creates a VM without vCPUs added at time
zero.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vm_create() to vm_create_barebones() and drop the @phys_pages
param. Pass '0' for the number of pages even though some callers pass
'DEFAULT_GUEST_PHY_PAGES', as the intent behind creating truly barebones
VMs is purely to create a VM, i.e. there aren't vCPUs, there's no guest
code loaded, etc..., and so there is nothing that will ever need or
consume guest memory.
Freeing up the name vm_create() will allow using the name for an inner
helper to the other VM creators, which need a "full" VM.
Opportunisticaly rewrite the function comment for addr_gpa2alias() to
focus on what the _function_ does, not what its _sole caller_ does.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Open code adding and doing setup for a vCPU in get-reg-list in order to
avoid the stack allocation that comes with aarch64_vcpu_add_default().
get-reg-list doesn't need to run the vCPU, and so doesn't need the guest
to be backed with memory. This will allow future cleanup to turn what is
current vm_create() into a barebones helper.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vm_create_without_vcpus() instead of open coding a rough equivalent
in psci_test.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vm_create_without_vcpus() instead of open coding a rough equivalent
in hardware_disable_test.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vm_create_without_vcpus() instead of open coding a rough equivalent.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vm_create_without_vcpus() in set_boot_cpu_id instead of open coding
the equivlant now that the "without_vcpus" variant does
vm_adjust_num_guest_pages().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the call to vm_adjust_num_guest_pages() from vm_create_with_vcpus()
down into vm_create_without_vcpus(). This will allow a future patch to
make the "w/o vCPUs" variant the common inner helper, e.g. so that the
"with_vcpus" helper calls the "without_vcpus" helper, instead of having
them be separate paths.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add VM creation helpers to expose/return 'struct vcpu' so that tests
don't have to hardcode a VCPU_ID or make assumptions about what vCPU ID
is used by the framework just to retrieve a vCPU the test created.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers for the various one-off helpers used by x86's vCPU state
save/restore helpers, and convert the other open coded ioctl()s to use
existing helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the get/set part of the MP_STATE and GUEST_DEBUG helpers to the end
to align with the many other ioctl() wrappers/helpers. Note, this is not
an endorsement of the predominant style, the goal is purely to provide
consistency in the selftests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Consolidate the helper for retrieving the list of save/restore MSRs and
the list of feature MSRs, and use the common helpers in the related
get_msr_index_features test. Switching to the common helpers eliminates
the testcase that KVM returns the same -E2BIG result if the input number
of MSRs is '1' versus '0', but considered that testcase isn't very
interesting, e.g. '0' and '1' are equally arbitrary, and certainly not
worth the additional code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Assert that KVM_SET_MSRS returns '0' or '1' when setting XSS to a
non-zero value. The ioctl() itself should "succeed", its only the
setting of the XSS MSR that should fail/fault.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cache the list of MSRs to save restore, mostly to justify not freeing the
list in the caller, which simplifies consumption of the list.
Opportunistically move the XSS test's so called is_supported_msr() to
common code as kvm_msr_is_in_save_restore_list(). The XSS is "supported"
by KVM, it's simply not in the save/restore list because KVM doesn't yet
allow a non-zero value.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework the KVM_ENABLE_CAP helpers to take the cap and arg0; literally
every current user, and likely every future user, wants to set 0 or 1
arguments and nothing else.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add __vm_enable_cap() and use it for negative tests that expect
KVM_ENABLE_CAP to fail. Opportunistically clean up the MAX_VCPU_ID test
error messages.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a backpointer to 'struct vcpu' so that tests can get at the owning
VM when passing around a vCPU object. Long term, this will be little
more than a nice-to-have feature, but in the short term it is a critical
step toward purging the VM+vcpu_id ioctl mess without introducing even
more churn.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the asserts for the many REDIST_REGS accesses into common helpers
instead of copy+pasting the same, unhelpful asserts over and over. Not
providing the actual (or expected) value makes it unnecessarily painful
to debug failures, especially since test_assert() prints the errno
unconditionally, e.g. on success, it may print a stale, misleading errno.
Use kvm_device_attr_get() to handle the "success" check so that the
"success" and "expected == actual" asserts are separated, which will make
it far less likely that a user incorrectly assumes the ioctl() failed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split the get/set device_attr helpers instead of using a boolean param to
select between get and set. Duplicating upper level wrappers is a very,
very small price to pay for improved readability, and having constant (at
compile time) inputs will allow the selftests framework to sanity check
ioctl() invocations.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop 'int' returns from *_device_has_attr() helpers that assert the
return is '0', there's no point in returning '0' and "requiring" the
caller to perform a redundant assertion.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_device_check_attr() and its variants to kvm_has_device_attr()
to be consistent with the ioctl names and with other helpers in the KVM
selftests framework.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Multiplex the return value and fd (on success) in __kvm_create_device()
to mimic common library helpers that return file descriptors, e.g. open().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move KVM_CREATE_DEVICE_TEST to its own helper, identifying "real" versus
"test" device creation based on a hardcoded boolean buried in the middle
of a param list is painful for readers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the two calls that pass @test=true to kvm_create_device() and drop
the @test param entirely. The two removed calls don't check the return
value of kvm_create_device(), so other than verifying KVM doesn't explode,
which is extremely unlikely given that the non-test variant was _just_
called, they are pointless and provide no validation coverage.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the KVM_IOCTL_ERROR() macro to generate error messages for a handful
of one-off arm64 ioctls. The calls in question are made without an
associated struct kvm_vm/kvm_vcpu as they are used to configure those
structs, i.e. can't be easily converted to e.g. vcpu_ioctl().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold kvm_util_internal.h into kvm_util_base.h, i.e. make all KVM utility
stuff "public". Hiding struct implementations from tests has been a
massive failure, as it has led to pointless and poorly named wrappers,
unnecessarily opaque code, etc...
Not to mention that the approach was a complete failure as evidenced by
the non-zero number of tests that were including kvm_util_internal.h.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make regs_dump() and sregs_dump() static, they're only implemented by
x86 and only used internally.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use __KVM_SYSCALL_ERROR() to report and pretty print non-KVM syscall and
ioctl errors, e.g. for mmap(), munmap(), uffd ioctls, etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced KVM-specific ioctl() helpers instead of open
coding calls to ioctl() just to pretty print the ioctl name.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make kvm_ioctl() a macro wrapper and print the _name_ of the ioctl on
failure instead of the number.
Deliberately do not use __stringify(), as that will expand the ioctl all
the way down to its numerical sequence, again the intent is to print the
name of the macro.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced VM-specific ioctl() helpers instead of open
coding calls to ioctl() just to pretty print the ioctl name. Keep a few
open coded assertions that provide additional info.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make vm_ioctl() a macro wrapper and print the _name_ of the ioctl on
failure instead of the number.
Deliberately do not use __stringify(), as that will expand the ioctl all
the way down to its numerical sequence. Again the intent is to print the
name of the macro.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add vcpu_get() to wrap vcpu_find() and deduplicate a pile of code that
asserts the requested vCPU exists.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop vcpu_get_fd(), it no longer has any users, and really should not
exist as the framework has failed if tests need to manually operate on
a vCPU fd.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vcpu_access_device_attr() in arm's arch_timer test instead of
manually retrieving the vCPU's fd. This will allow dropping vcpu_get_fd()
in a future patch.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add __vcpu_run() so that tests that want to avoid asserts on KVM_RUN
failures don't need to open code the ioctl() call.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced vCPU-specific ioctl() helpers instead of
open coding calls to ioctl() just to pretty print the ioctl name.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split vcpu_nested_state_set() into a wrapper that asserts, and an inner
helper that does not. Passing a bool is all kinds of awful as it's
unintuitive for readers and requires returning an 'int' from a function
that for most users can never return anything other than "success".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop @mode from vm_create() and have it use VM_MODE_DEFAULT. Add and use
an inner helper, __vm_create(), to service the handful of tests that want
something other than VM_MODE_DEFAULT.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make vcpu_ioctl() a macro wrapper and pretty the _name_ of the ioctl on
failure instead of the number. Add inner macros to allow handling cases
where the name of the ioctl needs to be resolved higher up the stack, and
to allow using the formatting for non-ioctl syscalls without being
technically wrong.
Deliberately do not use __stringify(), as that will expand the ioctl all
the way down to its numerical sequence, again the intent is to print the
name of the macro.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a second underscore to inner ioctl() helpers to better align with
commonly accepted kernel coding style, and to allow using a single
underscore variant in the future for macro shenanigans.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the @perm param from vm_create() and always open VM file descriptors
with O_RDWR. There's no legitimate use case for other permissions, and
if a selftest wants to do oddball negative testing it can open code the
necessary bits instead of forcing a bunch of tests to provide useless
information.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop declarations for allocate_kvm_dirty_log() and vm_create_device(),
which no longer have implementations.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When iterating over vCPUs, invoke access_v3_redist_reg() on the "current"
vCPU instead of vCPU0, which is presumably what was intended by iterating
over all vCPUs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update 'ret' with the return value of _kvm_device_access() prior to
asserting that ret is non-zero. In the current code base, the flaw is
benign as 'ret' is guaranteed to be -EBUSY from the previous run_vcpu(),
which also means that errno==EBUSY prior to _kvm_device_access(), thus
the "errno == EFAULT" part of the assert means that a false negative is
impossible (unless the kernel is being truly mean and spuriously setting
errno=EFAULT while returning success).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The x86-only KVM_CAP_TRIPLE_FAULT_EVENT was (appropriately) renamed to
KVM_CAP_X86_TRIPLE_FAULT_EVENT when the patches were applied, but the
docs and selftests got left behind. Fix them.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By forcing the maximum CPU that QEMU has available, we expose additional
capabilities, such as the RNDR instruction, which increases test
coverage. This then allows the CI to skip the fake seeding step in some
cases. Also enable STRICT_KERNEL_RWX to catch issues related to early
jump labels when the RNG is initialized at boot.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to show tests
x86:
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Rewrite gfn-pfn cache refresh
* Refuse starting the module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit
The selftests nested code only supports 4-level paging at the moment.
This means it cannot map nested guest physical addresses with more than
48 bits. Allow perf_test_util nested mode to work on hosts with more
than 48 physical addresses by restricting the guest test region to
48-bits.
While here, opportunistically fix an off-by-one error when dealing with
vm_get_max_gfn(). perf_test_util.c was treating this as the maximum
number of GFNs, rather than the maximum allowed GFN. This didn't result
in any correctness issues, but it did end up shifting the test region
down slightly when using huge pages.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-12-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an option to dirty_log_perf_test that configures the vCPUs to run in
L2 instead of L1. This makes it possible to benchmark the dirty logging
performance of nested virtualization, which is particularly interesting
because KVM must shadow L1's EPT/NPT tables.
For now this support only works on x86_64 CPUs with VMX. Otherwise
passing -n results in the test being skipped.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-11-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Break up the long lines for LIBKVM and alphabetize each architecture.
This makes reading the Makefile easier, and will make reading diffs to
LIBKVM easier.
No functional change intended.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-10-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The linker does obey strong/weak symbols when linking static libraries,
it simply resolves an undefined symbol to the first-encountered symbol.
This means that defining __weak arch-generic functions and then defining
arch-specific strong functions to override them in libkvm will not
always work.
More specifically, if we have:
lib/generic.c:
void __weak foo(void)
{
pr_info("weak\n");
}
void bar(void)
{
foo();
}
lib/x86_64/arch.c:
void foo(void)
{
pr_info("strong\n");
}
And a selftest that calls bar(), it will print "weak". Now if you make
generic.o explicitly depend on arch.o (e.g. add function to arch.c that
is called directly from generic.c) it will print "strong". In other
words, it seems that the linker is free to throw out arch.o when linking
because generic.o does not explicitly depend on it, which causes the
linker to lose the strong symbol.
One solution is to link libkvm.a with --whole-archive so that the linker
doesn't throw away object files it thinks are unnecessary. However that
is a bit difficult to plumb since we are using the common selftests
makefile rules. An easier solution is to drop libkvm.a just link
selftests with all the .o files that were originally in libkvm.a.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-9-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "all: $(STATIC_LIBS)" rule. The KVM selftests already depend
on $(STATIC_LIBS), so there is no reason to have an extra "all" rule.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-8-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create a small helper function to check if a given EPT/VPID capability
is supported. This will be re-used in a follow-up commit to check for 1G
page support.
No functional change intended.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-7-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a VMX-related macro so move it to vmx.h. While here, open code
the mask like the rest of the VMX bitmask macros.
No functional change intended.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-6-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor nested_map() to specify that it explicityl wants 4K mappings
(the existing behavior) and push the implementation down into
__nested_map(), which can be used in subsequent commits to create huge
page mappings.
No function change intended.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-5-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nested_map() does not take a parameter named eptp_memslot. Drop the
comment referring to it.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current EPT mapping code in the selftests only supports mapping 4K
pages. This commit extends that support with an option to map at 2M or
1G. This will be used in a future commit to create large page mappings
to test eager page splitting.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86_page_size is an enum used to communicate the desired page size with
which to map a range of memory. Under the hood they just encode the
desired level at which to map the page. This ends up being clunky in a
few ways:
- The name suggests it encodes the size of the page rather than the
level.
- In other places in x86_64/processor.c we just use a raw int to encode
the level.
Simplify this by adopting the kernel style of PG_LEVEL_XX enums and pass
around raw ints when referring to the level. This makes the code easier
to understand since these macros are very common in KVM MMU code.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf 2022-06-09
We've added 6 non-merge commits during the last 2 day(s) which contain
a total of 8 files changed, 49 insertions(+), 15 deletions(-).
The main changes are:
1) Fix an illegal copy_to_user() attempt seen by syzkaller through arm64
BPF JIT compiler, from Eric Dumazet.
2) Fix calling global functions from BPF_PROG_TYPE_EXT programs by using
the correct program context type, from Toke Høiland-Jørgensen.
3) Fix XSK TX batching invalid descriptor handling, from Maciej Fijalkowski.
4) Fix potential integer overflows in multi-kprobe link code by using safer
kvmalloc_array() allocation helpers, from Dan Carpenter.
5) Add Quentin as bpftool maintainer, from Quentin Monnet.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
MAINTAINERS: Add a maintainer for bpftool
xsk: Fix handling of invalid descriptors in XSK TX batching API
selftests/bpf: Add selftest for calling global functions from freplace
bpf: Fix calling global functions from BPF_PROG_TYPE_EXT programs
bpf: Use safer kvmalloc_array() where possible
bpf, arm64: Clear prog->jited_len along prog->jited
====================
Link: https://lore.kernel.org/r/20220608234133.32265-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Fix TDP MMU performance issue with disabling dirty logging
* Fix 5.14 regression with SVM TSC scaling
* Fix indefinite stall on applying live patches
* Fix unstable selftest
* Fix memory leak from wrong copy-and-paste
* Fix missed PV TLB flush when racing with emulation
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKglysUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOJDAgArpPcAnJbeT2VQTQcp94e4tp9k1Sf
gmUewajco4zFVB/sldE0fIporETkaX+FYYPiaNDdNgJ2lUw/HUJBN7KoFEYTZ37N
Xx/qXiIXQYFw1bmxTnacLzIQtD3luMCzOs/6/Q7CAFZIBpUtUEjkMlQOBuxoKeG0
B0iLCTJSw0taWcN170aN8G6T+5+bdR3AJW1k2wkgfESfYF9NfJoTUHQj9WTMzM2R
aBRuXvUI/rWKvQY3DfoRmgg9Ig/SirSC+abbKIs4H08vZIEUlPk3WOZSKpsN/Wzh
3XDnVRxgnaRLx6NI/ouI2UYJCmjPKbNcueGCf5IfUcHvngHjAEG/xxe4Qw==
=zQ9u
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
- syzkaller NULL pointer dereference
- TDP MMU performance issue with disabling dirty logging
- 5.14 regression with SVM TSC scaling
- indefinite stall on applying live patches
- unstable selftest
- memory leak from wrong copy-and-paste
- missed PV TLB flush when racing with emulation
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: do not report a vCPU as preempted outside instruction boundaries
KVM: x86: do not set st->preempted when going back to user space
KVM: SVM: fix tsc scaling cache logic
KVM: selftests: Make hyperv_clock selftest more stable
KVM: x86/MMU: Zap non-leaf SPTEs when disabling dirty logging
x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm()
KVM: x86/mmu: Check every prev_roots in __kvm_mmu_free_obsolete_roots()
entry/kvm: Exit to user mode when TIF_NOTIFY_SIGNAL is set
KVM: Don't null dereference ops->destroy
Add a selftest for triple fault event:
- launch the L2 and exit to userspace via I/O.
- using KVM_SET_VCPU_EVENTS to pend a triple fault event.
- with the immediate_exit, check the triple fault is pending.
- run for real with pending triple fault and L1 can see the triple
fault.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20220524135624.22988-3-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the following coccicheck warnings:
tools/testing/selftests/kvm/lib/s390x/ucall.c:25:15-17: WARNING
opportunity for min()
tools/testing/selftests/kvm/lib/x86_64/ucall.c:27:15-17: WARNING
opportunity for min()
tools/testing/selftests/kvm/lib/riscv/ucall.c:56:15-17: WARNING
opportunity for min()
tools/testing/selftests/kvm/lib/aarch64/ucall.c:82:15-17: WARNING
opportunity for min()
tools/testing/selftests/kvm/lib/aarch64/ucall.c:55:20-21: WARNING
opportunity for min()
min() is defined in tools/include/linux/kernel.h.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20220511120621.36956-1-guozhengkui@vivo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Basic test coverage of KVM_CAP_MAX_VCPU_ID cap.
This capability can be enabled before vCPU creation and only allowed
to set once. if assigned vcpu id is beyond KVM_CAP_MAX_VCPU_ID
capability, vCPU creation will fail.
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220422134456.26655-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a KVM self-test that checks whether a nSVM L1 is able to successfully
inject a software interrupt, a soft exception and a NMI into its L2 guest.
In practice, this tests both the next_rip field consistency and
L1-injected event with intervening L0 VMEXIT during its delivery:
the first nested VMRUN (that's also trying to inject a software interrupt)
will immediately trigger a L0 NPF.
This L0 NPF will have zero in its CPU-returned next_rip field, which if
incorrectly reused by KVM will trigger a #PF when trying to return to
such address 0 from the interrupt handler.
For NMI injection this tests whether the L1 NMI state isn't getting
incorrectly mixed with the L2 NMI state if a L1 -> L2 NMI needs to be
re-injected.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
[sean: check exact L2 RIP on first soft interrupt]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <d5f3d56528558ad8e28a9f1e1e4187f5a1e6770a.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix NAT support for NFPROTO_INET without layer 3 address,
from Florian Westphal.
2) Use kfree_rcu(ptr, rcu) variant in nf_tables clean_net path.
3) Use list to collect flowtable hooks to be deleted.
4) Initialize list of hook field in flowtable transaction.
5) Release hooks on error for flowtable updates.
6) Memleak in hardware offload rule commit and abort paths.
7) Early bail out in case device does not support for hardware offload.
This adds a new interface to net/core/flow_offload.c to check if the
flow indirect block list is empty.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: bail out early if hardware offload is not supported
netfilter: nf_tables: memleak flow rule from commit path
netfilter: nf_tables: release new hooks on unsupported flowtable flags
netfilter: nf_tables: always initialize flowtable hook list in transaction
netfilter: nf_tables: delete flowtable hooks via transaction list
netfilter: nf_tables: use kfree_rcu(ptr, rcu) to release hooks in clean_net path
netfilter: nat: really support inet nat without l3 address
====================
Link: https://lore.kernel.org/r/20220606212055.98300-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest that calls a global function with a context object parameter
from an freplace function to check that the program context type is
correctly converted to the freplace target when fetching the context type
from the kernel BTF.
v2:
- Trim includes
- Get rid of global function
- Use __noinline
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220606075253.28422-2-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test for enum64 value relocations.
The test will be skipped if clang version is 14 or lower
since enum64 is only supported from version 15.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062718.3726307-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a few unit tests for BTF_KIND_ENUM64 deduplication.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062713.3725409-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests to use the new enum kflag and enum64 API functions
in selftest btf_write.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062703.3724287-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The kflag is supported now for BTF_KIND_ENUM.
So remove the test which tests verifier failure
due to existence of kflag.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062657.3723737-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to show tests
-----BEGIN PGP SIGNATURE-----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=/6Ue
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: pvdump and selftest improvements
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to show tests
hyperv_clock doesn't always give a stable test result, especially with
AMD CPUs. The test compares Hyper-V MSR clocksource (acquired either
with rdmsr() from within the guest or KVM_GET_MSRS from the host)
against rdtsc(). To increase the accuracy, increase the measured delay
(done with nop loop) by two orders of magnitude and take the mean rdtsc()
value before and after rdmsr()/KVM_GET_MSRS.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220601144322.1968742-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
bpf_helpers.h has been moved to tools/lib/bpf since 5.10, so add more
including path.
Fixes: edae34a3ed ("selftests net: add UDP GRO fraglist + bpf self-tests")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220606064517.8175-1-lina.wang@mediatek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As subject, we only test SKB mode for xdping at present.
Now add DRV mode for xdping.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220602032507.464453-1-liuhangbin@gmail.com
tc_redirect_dtime was reported flaky from time to time. It
always fails at the udp test and complains about the bpf@tc-ingress
got a skb->tstamp when handling udp packet. It is unexpected
because the skb->tstamp should have been cleared when crossing
different netns.
The most likely cause is that the skb is actually a tcp packet
from the earlier tcp test. It could be the final TCP_FIN handling.
This patch tightens the skb->tstamp check in the bpf prog. It ensures
the skb is the current testing traffic. First, it checks that skb
matches the IPPROTO of the running test (i.e. tcp vs udp).
Second, it checks the server port (dst_ns_port). The server
port is unique for each test (50000 + test_enum).
Also fixed a typo in test_udp_dtime(): s/P100/P101/
Fixes: c803475fd8 ("bpf: selftests: test skb->tstamp in redirect_neigh")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220601234050.2572671-1-kafai@fb.com
- Initialise jump labels before setup_machine_fdt(), needed by commit
f5bda35fba ("random: use static branch for crng_ready()").
- Sparse warnings: missing prototype, incorrect __user annotation.
- Skip SVE kselftest if not sufficient vector lengths supported.
-----BEGIN PGP SIGNATURE-----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=25eW
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Most of issues addressed were introduced during this merging window.
- Initialise jump labels before setup_machine_fdt(), needed by commit
f5bda35fba ("random: use static branch for crng_ready()").
- Sparse warnings: missing prototype, incorrect __user annotation.
- Skip SVE kselftest if not sufficient vector lengths supported"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kselftest/arm64: signal: Skip SVE signal test if not enough VLs supported
arm64: Initialize jump labels before setup_machine_fdt()
arm64: hibernate: Fix syntax errors in comments
arm64: Remove the __user annotation for the restore_za_context() argument
ftrace/fgraph: fix increased missing-prototypes warnings
Here is the set of driver core changes for 5.19-rc1.
Note, I'm not really happy with this pull request as-is, see below for
details, but overall this is all good for everything but a small set of
systems, which we have a fix for already.
Lots of tiny driver core changes and cleanups happened this cycle,
but the two major things were:
- firmware_loader reorganization and additions including the
ability to have XZ compressed firmware images and the ability
for userspace to initiate the firmware load when it needs to,
instead of being always initiated by the kernel. FPGA devices
specifically want this ability to have their firmware changed
over the lifetime of the system boot, and this allows them to
work without having to come up with yet-another-custom-uapi
interface for loading firmware for them.
- physical location support added to sysfs so that devices that
know this information, can tell userspace where they are
located in a common way. Some ACPI devices already support
this today, and more bus types should support this in the
future.
Smaller changes included:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten any
linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request if you want to take them directly, _OR_ I can just revert
the probe timeout changes and they can wait for the next -rc1 merge
cycle. Given that the fixes are tested, and pretty simple, I'm leaning
toward that choice. Sorry this all came at the end of the merge window,
I should have resolved this all 2 weeks ago, that's my fault as it was
in the middle of some travel for me.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time outs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnv/A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/fACgvmenbo5HipqyHnOmTQlT50xQ9EYAn2eTq6ai
GkjLXBGNWOPBa5cU52qf
=yEi/
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
Here is the large set of char, misc, and other driver subsystem updates
for 5.19-rc1. The merge request for this has been delayed as I wanted
to get lots of linux-next testing due to some late arrivals of changes
for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers
and cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that
below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no reported
problems.
Note, there are 3 merge conflicts when merging this with your tree:
- MAINTAINERS, should be easy to resolve
- drivers/slimbus/qcom-ctrl.c, should be straightforward
resolution
- drivers/misc/lkdtm/stackleak.c, not an easy resolution. This
has been noted in the linux-next tree for a while, and
resolved there, here's a link to the resolution that Stephen
came up with and that Kees says is correct:
https://lore.kernel.org/r/20220509185344.3fe1a354@canb.auug.org.au
I will be glad to provide a merge point that contains these resolutions
if that makes things any easier for you.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnkbA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylOrgCggbbAFwESBY9o2YfpG+2VOLpc0GAAoJgY1XN8
P/gumbLEpFvoBZ5xLIW8
=KCgk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
A collection of small fixes for 5.19 merge window. Nothing particular
stands out, as most changes are device-specific fixes and quirks.
-----BEGIN PGP SIGNATURE-----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=SGqO
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 5.19 merge window. Nothing particular
stands out, as most changes are device-specific fixes and quirks"
* tag 'sound-fix-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
selftests: alsa: Handle pkg-config failure more gracefully
ALSA: usb-audio: Optimize TEAC clock quirk
ASoC: da7219: cancel AAD related work earlier for jack removal
ASoC: da7219: Fix pole orientation detection on certain headsets
ASoC: Intel: avs: Fix build error on arc, m68k and sparc
ALSA: hda/realtek - Fix microphone noise on ASUS TUF B550M-PLUS
ALSA: hda/via: Delete does not require return
ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9520 laptop
ASoC: Intel: common: fix typo for tplg naming
ALSA: usb-audio: Cancel pending work at closing a MIDI substream
ALSA: usb-audio: Add mixer mapping for Gigabyte B450/550 Mobos
ASoC: rt5640: Do not manipulate pin "Platform Clock" if the "Platform Clock" is not in the DAPM
ASoC: SOF: amd: Fixed Build error
ASoC: fsl_sai: Fix FSL_SAI_xDR/xFR definition
ASoC: soc-pcm: fix BE transition for TRIGGER_START
In the commit da00d2f117 ("bpf: Add test ops for BPF_PROG_TYPE_TRACING"),
the bpf_fentry_test1 function was moved into bpf_prog_test_run_tracing(),
which is the test_run function of the tracing BPF programs.
Thus calling 'bpf_prog_test_run_opts(filter_fd, &topts)' will not trigger
bpf_fentry_test1 function as filter_fd is a sk_filter BPF program.
Fix it by replacing filter_fd with fexit_fd in the bpf_prog_test_run_opts()
function.
Fixes: da00d2f117 ("bpf: Add test ops for BPF_PROG_TYPE_TRACING")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220521151329.648013-1-ytcoode@gmail.com
This change adds a test for libbpf_bpf_link_type_str. The test retrieves
all variants of the bpf_link_type enumeration using BTF and makes sure
that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-12-deso@posteo.net
This change switches bpftool over to using the recently introduced
libbpf_bpf_attach_type_str function instead of maintaining its own
string representation for the bpf_attach_type enum.
Note that contrary to other enum types, the variant names that bpftool
maps bpf_attach_type to do not adhere a simple to follow rule. With
bpf_prog_type, for example, the textual representation can easily be
inferred by stripping the BPF_PROG_TYPE_ prefix and lowercasing the
remaining string. bpf_attach_type violates this rule for various
variants.
We decided to fix up this deficiency with this change, meaning that
bpftool uses the same textual representations as libbpf. Supporting
tests, completion scripts, and man pages have been adjusted accordingly.
However, we did add support for accepting (the now undocumented)
original attach type names when they are provided by users.
For the test (test_bpftool_synctypes.py), I have removed the enum
representation checks, because we no longer mirror the various enum
variant names in bpftool source code. For the man page, help text, and
completion script checks we are now using enum definitions from
uapi/linux/bpf.h as the source of truth directly.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-10-deso@posteo.net
This change adds a test for libbpf_bpf_attach_type_str. The test
retrieves all variants of the bpf_attach_type enumeration using BTF and
makes sure that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-9-deso@posteo.net
This change switches bpftool over to using the recently introduced
libbpf_bpf_map_type_str function instead of maintaining its own string
representation for the bpf_map_type enum.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-7-deso@posteo.net
This change adds a test for libbpf_bpf_map_type_str. The test retrieves
all variants of the bpf_map_type enumeration using BTF and makes sure
that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-6-deso@posteo.net
This change switches bpftool over to using the recently introduced
libbpf_bpf_prog_type_str function instead of maintaining its own string
representation for the bpf_prog_type enum.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-4-deso@posteo.net
This change adds a test for libbpf_bpf_prog_type_str. The test retrieves
all variants of the bpf_prog_type enumeration using BTF and makes sure
that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-3-deso@posteo.net
Current release - new code bugs:
- af_packet: make sure to pull the MAC header, avoid skb panic in GSO
- ptp_clockmatrix: fix inverted logic in is_single_shot()
- netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag
- dt-bindings: net: adin: fix adi,phy-output-clock description syntax
- wifi: iwlwifi: pcie: rename CAUSE macro, avoid MIPS build warning
Previous releases - regressions:
- Revert "net: af_key: add check for pfkey_broadcast in function
pfkey_process"
- tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
- nf_tables: disallow non-stateful expression in sets earlier
- nft_limit: clone packet limits' cost value
- nf_tables: double hook unregistration in netns path
- ping6: fix ping -6 with interface name
Previous releases - always broken:
- sched: fix memory barriers to prevent skbs from getting stuck
in lockless qdiscs
- neigh: set lower cap for neigh_managed_work rearming, avoid
constantly scheduling the probe work
- bpf: fix probe read error on big endian in ___bpf_prog_run()
- amt: memory leak and error handling fixes
Misc:
- ipv6: expand & rename accept_unsolicited_na to accept_untracked_na
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bWkn
-----END PGP SIGNATURE-----
Merge tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - new code bugs:
- af_packet: make sure to pull the MAC header, avoid skb panic in GSO
- ptp_clockmatrix: fix inverted logic in is_single_shot()
- netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag
- dt-bindings: net: adin: fix adi,phy-output-clock description syntax
- wifi: iwlwifi: pcie: rename CAUSE macro, avoid MIPS build warning
Previous releases - regressions:
- Revert "net: af_key: add check for pfkey_broadcast in function
pfkey_process"
- tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
- nf_tables: disallow non-stateful expression in sets earlier
- nft_limit: clone packet limits' cost value
- nf_tables: double hook unregistration in netns path
- ping6: fix ping -6 with interface name
Previous releases - always broken:
- sched: fix memory barriers to prevent skbs from getting stuck in
lockless qdiscs
- neigh: set lower cap for neigh_managed_work rearming, avoid
constantly scheduling the probe work
- bpf: fix probe read error on big endian in ___bpf_prog_run()
- amt: memory leak and error handling fixes
Misc:
- ipv6: expand & rename accept_unsolicited_na to accept_untracked_na"
* tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
net/af_packet: make sure to pull mac header
net: add debug info to __skb_pull()
net: CONFIG_DEBUG_NET depends on CONFIG_NET
stmmac: intel: Add RPL-P PCI ID
net: stmmac: use dev_err_probe() for reporting mdio bus registration failure
tipc: check attribute length for bearer name
ice: fix access-beyond-end in the switch code
nfp: remove padding in nfp_nfdk_tx_desc
ax25: Fix ax25 session cleanup problems
net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline
sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels
sfc/siena: fix considering that all channels have TX queues
socket: Don't use u8 type in uapi socket.h
net/sched: act_api: fix error code in tcf_ct_flow_table_fill_tuple_ipv6()
net: ping6: Fix ping -6 with interface name
macsec: fix UAF bug for real_dev
octeontx2-af: fix error code in is_valid_offset()
wifi: mac80211: fix use-after-free in chanctx code
bonding: guard ns_targets by CONFIG_IPV6
tcp: tcp_rtx_synack() can be called from process context
...
On platform where SVE is supported but there are less than 2 VLs available
the signal SVE change test should be skipped instead of failing.
Reported-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220524103149.2802-1-cristian.marussi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Update comments in the memblock tests so that they will have consistent
style.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmKYXQwTHHJwcHRAbGlu
dXguaWJtLmNvbQAKCRA5A4Ymyw79kawvB/4omytet0iJoAJ66J7iMPeR8yuCL5tD
idtUR5arytQ0G6tgjpDXjGE2114VWHbI4DaypmJ1xd/Z01cbqF3lWKj0mPIILq+Q
2JKbS8O5Y8j7if6br5CKRG6aIjqPa2Q3ZPp2a+eFux1ZA5EKdRZ4M+vsdRKVqD3/
ntJ/7T3wena3BbuQk6CPbj/BGmUYOzbYXDJrIXZy9iFsCdsKrdVReFuRbIf+f4j6
tPU0im16gwaibVRBhtpo8dNgaYXnSLmTYUMlFv9dUovAHOvhqQWAWynrESno+G02
RGihoA2ezxQ4gh8Eou8nwS/94phbz5ocu6A9rbBXorM0NPRs7Tyld0TN
=LvSB
-----END PGP SIGNATURE-----
Merge tag 'memblock-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock test suite updates from Mike Rapoport:
"Comment updates for memblock test suite
Update comments in the memblock tests so that they will have
consistent style"
* tag 'memblock-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: remove completed TODO item
memblock tests: update style of comments for memblock_free_*() functions
memblock tests: update style of comments for memblock_remove_*() functions
memblock tests: update style of comments for memblock_reserve_*() functions
memblock tests: update style of comments for memblock_add_*() functions
Let's standardize the s390x KVM selftest output to the TAP output
generated via the kselftests.h interface.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20220531101554.36844-5-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The tprot test currently does not have any output (unless one of
the TEST_ASSERT statement fails), so it's hard to say for a user
whether a certain new sub-test has been included in the binary or
not. Let's make this a little bit more user-friendly and include
some TAP output via the kselftests.h interface.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20220531101554.36844-4-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The sync_regs test currently does not have any output (unless one
of the TEST_ASSERT statement fails), so it's hard to say for a user
whether a certain new sub-test has been included in the binary or
not. Let's make this a little bit more user-friendly and include
some TAP output via the kselftests.h interface.
To be able to distinguish the different sub-tests more easily, we
also break up the huge main() function here in more fine grained
parts.
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20220531101554.36844-3-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The memop test currently does not have any output (unless one of the
TEST_ASSERT statement fails), so it's hard to say for a user whether
a certain new sub-test has been included in the binary or not. Let's
make this a little bit more user-friendly and include some TAP output
via the kselftests.h interface.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20220531101554.36844-2-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
When no l3 address is given, priv->family is set to NFPROTO_INET and
the evaluation function isn't called.
Call it too so l4-only rewrite can work.
Also add a test case for this.
Fixes: a33f387ecd ("netfilter: nft_nat: allow to specify layer 4 protocol NAT only")
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Follow the pattern used by other selftests like memfd and fall back on the
standard toolchain options to build with a system installed alsa-lib if
we don't get anything from pkg-config. This reduces our build dependencies
a bit in the common case while still allowing use of pkg-config in case
there is a need for it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220531151337.2933810-1-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
RFC 9131 changes default behaviour of handling RX of NA messages when the
corresponding entry is absent in the neighbour cache. The current
implementation is limited to accept just unsolicited NAs. However, the
RFC is more generic where it also accepts solicited NAs. Both types
should result in adding a STALE entry for this case.
Expand accept_untracked_na behaviour to also accept solicited NAs to
be compliant with the RFC and rename the sysctl knob to
accept_untracked_na.
Fixes: f9a2fb7331 ("net/ipv6: Introduce accept_unsolicited_na knob to implement router-side changes for RFC9131")
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220530101414.65439-1-aajith@arista.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hTzI
-----END PGP SIGNATURE-----
Merge tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits)
MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC
MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA
MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem()
MIPS: Kconfig: Fix indentation and add endif comment
MIPS: bmips: Fix compiler warning observed on W=1 build
MIPS: Rewrite `csum_tcpudp_nofold' in plain C
mips: setup: use strscpy to replace strlcpy
MIPS: Octeon: add SNIC10E board
MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.
MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
MIPS: Ingenic: Add PWM nodes for X1830.
MIPS: Octeon: fix typo in comment
MIPS: loongson32: Kconfig: Remove extra space
MIPS: Sibyte: remove unnecessary return variable
MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation
selftests/ftrace: Save kprobe_events to test log
MIPS: tools: no need to initialise statics to 0
MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon
MIPS: VR41xx: Drop redundant spinlock initialization
MIPS: smp: optimization for flush_tlb_mm when exiting
...
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT).
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later).
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ.
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later.
- Drop support for system call instruction emulation.
- Many other small features and fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas Sanjaya, Bjorn
Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian King, Daniel Axtens, Dwaipayan
Ray, Fabiano Rosas, Finn Thain, Frank Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu
Hua, Haowen Bai, Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof Kozlowski, Laurent
Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes, Miaoqian Lin, Minghao Chi, Nathan
Chancellor, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár,
Paul Mackerras, Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang wangx, Xiaomeng Tong,
Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing, Yu Kuai, Zheng Bin, Zou Wei, Zucheng
Zheng.
-----BEGIN PGP SIGNATURE-----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=15oQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later
- Drop support for system call instruction emulation
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.
* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/64: Include cache.h directly in paca.h
powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
powerpc/xics: Include missing header
powerpc/powernv/pci: Drop VF MPS fixup
powerpc/fsl_book3e: Don't set rodata RO too early
powerpc/microwatt: Add mmu bits to device tree
powerpc/powernv/flash: Check OPAL flash calls exist before using
powerpc/powermac: constify device_node in of_irq_parse_oldworld()
powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
powerpc: Enable the DAWR on POWER9 DD2.3 and above
powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
powerpc: Fix all occurences of "the the"
selftests/powerpc/pmu/ebb: remove fixed_instruction.S
powerpc/platforms/83xx: Use of_device_get_match_data()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
powerpc/pseries/vas: Call misc_deregister if sysfs init fails
powerpc/papr_scm: Fix leaking nvdimm_events_map elements
...
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously hidden
behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL DVSEC
/ 'mem_enable') before enabling new CXL 2.0 decode configurations (CXL
HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYpFUogAKCRDfioYZHlFs
Zz+VAP9o/NkYhbaM2Ne9ImgsdJii96gA8nN7q/q/ZoXjsSx2WQD+NRC5d3ZwZDCa
9YKEkntnvbnAZOCs+ZUuyZBgNh6vsgU=
=p92w
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for this cycle.
The highlight is new driver-core infrastructure and CXL subsystem
changes for allowing lockdep to validate device_lock() usage. Thanks
to PeterZ for setting me straight on the current capabilities of the
lockdep API, and Greg acked it as well.
On the CXL ACPI side this update adds support for CXL _OSC so that
platform firmware knows that it is safe to still grant Linux native
control of PCIe hotplug and error handling in the presence of CXL
devices. A circular dependency problem was discovered between suspend
and CXL memory for cases where the suspend image might be stored in
CXL memory where that image also contains the PCI register state to
restore to re-enable the device. Disable suspend for now until an
architecture is defined to clarify that conflict.
Lastly a collection of reworks, fixes, and cleanups to the CXL
subsystem where support for snooping mailbox commands and properly
handling the "mem_enable" flow are the highlights.
Summary:
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously
hidden behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag
set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL
DVSEC / 'mem_enable') before enabling new CXL 2.0 decode
configurations (CXL HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure"
* tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (47 commits)
cxl/port: Enable HDM Capability after validating DVSEC Ranges
cxl/port: Reuse 'struct cxl_hdm' context for hdm init
cxl/port: Move endpoint HDM Decoder Capability init to port driver
cxl/pci: Drop @info argument to cxl_hdm_decode_init()
cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()
cxl/mem: Skip range enumeration if mem_enable clear
cxl/mem: Consolidate CXL DVSEC Range enumeration in the core
cxl/pci: Move cxl_await_media_ready() to the core
cxl/mem: Validate port connectivity before dvsec ranges
cxl/mem: Fix cxl_mem_probe() error exit
cxl/pci: Drop wait_for_valid() from cxl_await_media_ready()
cxl/pci: Consolidate wait_for_media() and wait_for_media_ready()
cxl/mem: Drop mem_enabled check from wait_for_media()
nvdimm: Fix firmware activation deadlock scenarios
device-core: Kill the lockdep_mutex
nvdimm: Drop nd_device_lock()
ACPI: NFIT: Drop nfit_device_lock()
nvdimm: Replace lockdep_mutex with local lock classes
cxl: Drop cxl_device_lock()
cxl/acpi: Add root device lockdep validation
...
API:
- Test in-place en/decryption with two sglists in testmgr.
- Fix process vs. softirq race in cryptd.
Algorithms:
- Add arm64 acceleration for sm4.
- Add s390 acceleration for chacha20.
Drivers:
- Add polarfire soc hwrng support in mpsf.
- Add support for TI SoC AM62x in sa2ul.
- Add support for ATSHA204 cryptochip in atmel-sha204a.
- Add support for PRNG in caam.
- Restore support for storage encryption in qat.
- Restore support for storage encryption in hisilicon/sec.
-----BEGIN PGP SIGNATURE-----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=oVRe
-----END PGP SIGNATURE-----
Merge tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Test in-place en/decryption with two sglists in testmgr
- Fix process vs softirq race in cryptd
Algorithms:
- Add arm64 acceleration for sm4
- Add s390 acceleration for chacha20
Drivers:
- Add polarfire soc hwrng support in mpsf
- Add support for TI SoC AM62x in sa2ul
- Add support for ATSHA204 cryptochip in atmel-sha204a
- Add support for PRNG in caam
- Restore support for storage encryption in qat
- Restore support for storage encryption in hisilicon/sec"
* tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume()
crypto: hisilicon/sec - delete the flag CRYPTO_ALG_ALLOCATES_MEMORY
crypto: qat - add support for 401xx devices
crypto: qat - re-enable registration of algorithms
crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag
crypto: qat - add param check for DH
crypto: qat - add param check for RSA
crypto: qat - remove dma_free_coherent() for DH
crypto: qat - remove dma_free_coherent() for RSA
crypto: qat - fix memory leak in RSA
crypto: qat - add backlog mechanism
crypto: qat - refactor submission logic
crypto: qat - use pre-allocated buffers in datapath
crypto: qat - set to zero DH parameters before free
crypto: s390 - add crypto library interface for ChaCha20
crypto: talitos - Uniform coding style with defined variable
crypto: octeontx2 - simplify the return expression of otx2_cpt_aead_cbc_aes_sha_setkey()
crypto: cryptd - Protect per-CPU resource by disabling BH.
crypto: sun8i-ce - do not fallback if cryptlen is less than sg length
crypto: sun8i-ce - rework debugging
...
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYpFPcQAKCRDfioYZHlFs
Z9A3AQCdfoT5sY3OK+I/3oTvJ//6lw2MtXrnXFM046ICKPi9sgD8CzR9mRAHA+vj
kxOtJEU2bA9naninXGORsDUndiNkwQo=
=gVIn
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and DAX updates from Dan Williams:
"New support for clearing memory errors when a file is in DAX mode,
alongside with some other fixes and cleanups.
Previously it was only possible to clear these errors using a truncate
or hole-punch operation to trigger the filesystem to reallocate the
block, now, any page aligned write can opportunistically clear errors
as well.
This change spans x86/mm, nvdimm, and fs/dax, and has received the
appropriate sign-offs. Thanks to Jane for her work on this.
Summary:
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)"
* tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
pmem: implement pmem_recovery_write()
pmem: refactor pmem_clear_poison()
dax: add .recovery_write dax_operation
dax: introduce DAX_RECOVERY_WRITE dax access mode
mce: fix set_mce_nospec to always unmap the whole page
x86/mce: relocate set{clear}_mce_nospec() functions
acpi/nfit: rely on mce->misc to determine poison granularity
testing: nvdimm: asm/mce.h is not needed in nfit.c
testing: nvdimm: iomap: make __nfit_test_ioremap a macro
nvdimm: Allow overwrite in the presence of disabled dimms
tools/testing/nvdimm: remove unneeded flush_workqueue
and alloc_contig_range alignment", from Zi Yan.
A series of z3fold cleanups and fixes from Miaohe Lin.
Some memcg selftests work from Michal Koutný <mkoutny@suse.com>
Some swap fixes and cleanups from Miaohe Lin.
Several individual minor fixups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYpEE7QAKCRDdBJ7gKXxA
jlamAP9WmjNdx+5Pz5OkkaSjBO7y7vBrBTcQ9e5pz8bUWRoQhwEA+WtsssLmq9aI
7DBDmBKYCMTbzOQTqaMRHkB+JWZo+Ao=
=L3f1
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- Two follow-on fixes for the post-5.19 series "Use pageblock_order for
cma and alloc_contig_range alignment", from Zi Yan.
- A series of z3fold cleanups and fixes from Miaohe Lin.
- Some memcg selftests work from Michal Koutný <mkoutny@suse.com>
- Some swap fixes and cleanups from Miaohe Lin
- Several individual minor fixups
* tag 'mm-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
mm/shmem.c: suppress shift warning
mm: Kconfig: reorganize misplaced mm options
mm: kasan: fix input of vmalloc_to_page()
mm: fix is_pinnable_page against a cma page
mm: filter out swapin error entry in shmem mapping
mm/shmem: fix infinite loop when swap in shmem error at swapoff time
mm/madvise: free hwpoison and swapin error entry in madvise_free_pte_range
mm/swapfile: fix lost swap bits in unuse_pte()
mm/swapfile: unuse_pte can map random data if swap read fails
selftests: memcg: factor out common parts of memory.{low,min} tests
selftests: memcg: remove protection from top level memcg
selftests: memcg: adjust expected reclaim values of protected cgroups
selftests: memcg: expect no low events in unprotected sibling
selftests: memcg: fix compilation
mm/z3fold: fix z3fold_page_migrate races with z3fold_map
mm/z3fold: fix z3fold_reclaim_page races with z3fold_free
mm/z3fold: always clear PAGE_CLAIMED under z3fold page lock
mm/z3fold: put z3fold page back into unbuddied list when reclaim or migration fails
revert "mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_alloc"
mm/z3fold: throw warning on failure of trylock_page in z3fold_alloc
...
The memory protection test setup and runtime is almost equal for
memory.low and memory.min cases.
It makes modification of the common parts prone to mistakes, since the
protections are similar not only in setup but also in principle, factor
the common part out.
Past exceptions between the tests:
- missing memory.min is fine (kept),
- test_memcg_low protected orphaned pagecache (adapted like
test_memcg_min and we keep the processes of protected memory running).
The evaluation in two tests is different (OOM of allocator vs low events
of protégés), this is kept different.
Link: https://lkml.kernel.org/r/20220518161859.21565-6-mkoutny@suse.com
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
CC: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Richard Palethorpe <rpalethorpe@suse.de>
Cc: David Vernet <void@manifault.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The reclaim is triggered by memory limit in a subtree, therefore the
testcase does not need configured protection against external reclaim.
Also, correct respective comments.
Link: https://lkml.kernel.org/r/20220518161859.21565-5-mkoutny@suse.com
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: David Vernet <void@manifault.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Richard Palethorpe <rpalethorpe@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The numbers are not easy to derive in a closed form (certainly mere
protections ratios do not apply), therefore use a simulation to obtain
expected numbers.
Link: https://lkml.kernel.org/r/20220518161859.21565-4-mkoutny@suse.com
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: David Vernet <void@manifault.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Richard Palethorpe <rpalethorpe@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This is effectively a revert of commit cdc69458a5 ("cgroup: account for
memory_recursiveprot in test_memcg_low()"). The case test_memcg_low will
fail with memory_recursiveprot until resolved in reclaim code.
However, this patch preserves the existing helpers and variables for later
uses.
Link: https://lkml.kernel.org/r/20220518161859.21565-3-mkoutny@suse.com
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: David Vernet <void@manifault.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Richard Palethorpe <rpalethorpe@suse.de>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memcontrol selftests fixups", v2.
Flushing the patches to make memcontrol selftests check the events
behavior we had consensus about (test_memcg_low fails).
(test_memcg_reclaim, test_memcg_swap_max fail for me now but it's present
even before the refactoring.)
The two bigger changes are:
- adjustment of the protected values to make tests succeed with the given
tolerance,
- both test_memcg_low and test_memcg_min check protection of memory in
populated cgroups (actually as per Documentation/admin-guide/cgroup-v2.rst
memory.min should not apply to empty cgroups, which is not the case
currently. Therefore I unified tests with the populated case in order to to
bring more broken tests).
This patch (of 5):
This fixes mis-applied changes from commit 72b1e03aa7 ("cgroup: account
for memory_localevents in test_memcg_oom_group_leaf_events()").
Link: https://lkml.kernel.org/r/20220518161859.21565-1-mkoutny@suse.com
Link: https://lkml.kernel.org/r/20220518161859.21565-2-mkoutny@suse.com
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Richard Palethorpe <rpalethorpe@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kernel function urandom_read is replaced with urandom_read_iter.
Therefore, kprobe on urandom_read is not working any more:
[root@eth50-1 bpf]# ./test_progs -n 161
test_stacktrace_build_id:PASS:skel_open_and_load 0 nsec
libbpf: kprobe perf_event_open() failed: No such file or directory
libbpf: prog 'oncpu': failed to create kprobe 'urandom_read+0x0' \
perf event: No such file or directory
libbpf: prog 'oncpu': failed to auto-attach: -2
test_stacktrace_build_id:FAIL:attach_tp err -2
161 stacktrace_build_id:FAIL
Fix this by replacing urandom_read with urandom_read_iter in the test.
Fixes: 1b388e7765 ("random: convert to using fops->read_iter()")
Reported-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20220526191608.2364049-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* ultravisor communication device driver
* fix TEID on terminating storage key ops
RISC-V:
* Added Sv57x4 support for G-stage page table
* Added range based local HFENCE functions
* Added remote HFENCE functions based on VCPU requests
* Added ISA extension registers in ONE_REG interface
* Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
* Add support for the ARMv8.6 WFxT extension
* Guard pages for the EL2 stacks
* Trap and emulate AArch32 ID registers to hide unsupported features
* Ability to select and save/restore the set of hypercalls exposed
to the guest
* Support for PSCI-initiated suspend in collaboration with userspace
* GICv3 register-based LPI invalidation support
* Move host PMU event merging into the vcpu data structure
* GICv3 ITS save/restore fixes
* The usual set of small-scale cleanups and fixes
x86:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
* Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
* Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
* V_TSC_AUX support
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKN9M4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNLeAf+KizAlQwxEehHHeNyTkZuKyMawrD6
zsqAENR6i1TxiXe7fDfPFbO2NR0ZulQopHbD9mwnHJ+nNw0J4UT7g3ii1IAVcXPu
rQNRGMVWiu54jt+lep8/gDg0JvPGKVVKLhxUaU1kdWT9PhIOC6lwpP3vmeWkUfRi
PFL/TMT0M8Nfryi0zHB0tXeqg41BiXfqO8wMySfBAHUbpv8D53D2eXQL6YlMM0pL
2quB1HxHnpueE5vj3WEPQ3PCdy1M2MTfCDBJAbZGG78Ljx45FxSGoQcmiBpPnhJr
C6UGP4ZDWpml5YULUoA70k5ylCbP+vI61U4vUtzEiOjHugpPV5wFKtx5nw==
=ozWx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
file-backed transparent hugepages.
Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
enablement of the recent huge page vmemmap optimization feature.
Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
David Vernet has done some fixup work on the memcg selftests.
Peter Xu has taught userfaultfd to handle write protection faults against
shmem- and hugetlbfs-backed files.
More DAMON development from SeongJae Park - adding online tuning of the
feature and support for monitoring of fixed virtual address ranges. Also
easier discovery of which monitoring operations are available.
Nadav Amit has done some optimization of TLB flushing during mprotect().
Neil Brown continues to labor away at improving our swap-over-NFS support.
David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
Peng Liu fixed some errors in the core hugetlb code.
Joao Martins has reduced the amount of memory consumed by device-dax's
compound devmaps.
Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
Roman Gushchin has done more work on the memcg selftests.
And, of course, many smaller fixes and cleanups. Notably, the customary
million cleanup serieses from Miaohe Lin.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
=nFe6
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
The psock_snd test sends and receives packets over loopback, and
the test results depend on parameter settings:
Set rp_filter=0,
or set rp_filter=1 and accept_local=1
so that the test will pass. Otherwise, this test will fail with
Resource temporarily unavailable:
sudo ./psock_snd.sh
dgram
tx: 128
rx: 142
./psock_snd: recv: Resource temporarily unavailable
For most distro kernel releases(like Ubuntu or Centos), the parameter
rp_filter is enabled by default, so it's necessary to enable the
parameter lo.accept_local in psock_snd test. And this test runs
inside a netns, changing a sysctl is fine.
Signed-off-by: luyun <luyun@kylinos.cn>
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220525031819.866684-1-luyun_611@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Not much dramatic changes at this time, but we've received quite
a lot of changes for ASoC, while there are still a few fixes and
quirks for usual HD- and USB-auido. Here are some highlights.
* ASoC:
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs
- Initial stages of Intel AVS driver merge
- Introduction of v4 IPC mechanism for SOF
- TDM mode support for AK4613
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
* Others
- A few regression fixes after the USB-audio endpoint management
refactoring
- More enhancements for Cirrus HD-audio codec support (still ongoing)
- Addition of generic serial MIDI driver
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmKOEiAOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE96FxAAnoVCecFK955fWInCULe15xYpi9kqngDSLAQk
k6TkbP8AFyX+3PbIb9YVK9u+fLBaZzdK/ZIRqZNfb5T4q8tVTHphg2P+SNB36qaD
nTTaEQ6dr6VUJO3fwwVBa3NJ+rGPr8KMKLlQGCg/I8HKdFeW2t/mV1YZI/ZxM7Or
MXu3F5dt3yVXXMgUb33if+atYCXOwJ9YIqe1WHE4oPTtfOhbwiIdFeHgg88Kq7vJ
ep7PCbyJ0rqfA9BIAnBfQuD9ZoaS7mKlo9xgyauNBzWnbRVd7dYyUnaxH++XLPPS
GS0MEgftJfmUay6o++I7qrhoTyMKMHN/CU+6RlR1GD6WBpBhQ6T+poLkFDvKqbL8
kvFEBFrEf0soeAKkUinzl1wCJnzWvpq2PF0EewQp03A3vOL5MOzGdId1wLKLmbCw
Z0e0HAKTP4/AQeBluLo/SjiNoeSEU76xYYv8tFGv531ybIhvsF0nm/Suv4VZcy0V
9tr2gLSORDLTBqSJqCf1JgN8oJht0QLirzgSekk8HUvx1JnIwwAaH1Dvy1DMrjyu
TQ6oRyDS2giHKh7FItv3+U+HE1CkA89dzDvGrIbKrT6xkodHGzLNr0DxaDGuR11w
H9f9oFEnGBpBxWmfLkGTa8+oBenTz8YRm4Ti8xhZkJkD1ys/4fjasAYoIKJqdnxH
iG1DWic=
=5qBk
-----END PGP SIGNATURE-----
Merge tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Not much dramatic changes at this time, but we've received quite a lot
of changes for ASoC, while there are still a few fixes and quirks for
usual HD- and USB-auido. Here are some highlights.
ASoC:
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs
- Initial stages of Intel AVS driver merge
- Introduction of v4 IPC mechanism for SOF
- TDM mode support for AK4613
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
Others:
- A few regression fixes after the USB-audio endpoint management
refactoring
- More enhancements for Cirrus HD-audio codec support (still ongoing)
- Addition of generic serial MIDI driver"
* tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits)
ALSA: hda/realtek - Add new type for ALC245
ALSA: usb-audio: Configure sync endpoints before data
ALSA: ctxfi: fix typo in comment
ALSA: cs5535audio: fix typo in comment
ALSA: ctxfi: Add SB046x PCI ID
ALSA: usb-audio: Add missing ep_idx in fixed EP quirks
ALSA: usb-audio: Workaround for clock setup on TEAC devices
ALSA: lola: Bounds check loop iterator against streams array size
ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv()
ASoC: rt1308-sdw: add the default value of register 0xc320
ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic
ASoC: rt9120: Fix 3byte read, valule offset typo
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver.
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver
ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR'
ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get()
ASoC: SOF: mediatek: remove duplicate include in mt8195.c
ASoC: SOF: mediatek: Add mt8195 debug dump
ASoC: SOF: mediatek: Add mediatek common debug dump
...
Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding
to very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space
to remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections
that have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting.
This makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core
from Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wjii
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
Pull cgroup updates from Tejun Heo:
"Nothing too interesting. This adds cpu controller selftests and there
are a couple code cleanup patches"
* 'for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: remove the superfluous judgment
cgroup: Make cgroup_debug static
kseltest/cgroup: Make test_stress.sh work if run interactively
kselftest/cgroup: fix test_stress.sh to use OUTPUT dir
cgroup: Add config file to cgroup selftest suite
cgroup: Add test_cpucg_max_nested() testcase
cgroup: Add test_cpucg_max() testcase
cgroup: Add test_cpucg_nested_weight_underprovisioned() testcase
cgroup: Adding test_cpucg_nested_weight_overprovisioned() testcase
cgroup: Add test_cpucg_weight_underprovisioned() testcase
cgroup: Add test_cpucg_weight_overprovisioned() testcase
cgroup: Add test_cpucg_stats() testcase to cgroup cpu selftests
cgroup: Add new test_cpu.c test suite in cgroup selftests
This KUnit update for Linux 5.19-rc1 consists of several fixes, cleanups,
and enhancements to tests and framework:
- introduces _NULL and _NOT_NULL macros to pointer error checks
- reworks kunit_resource allocation policy to fix memory leaks when
caller doesn't specify free() function to be used when allocating
memory using kunit_add_resource() and kunit_alloc_resource() funcs.
- adds ability to specify suite-level init and exit functions
-----BEGIN PGP SIGNATURE-----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=DzVQ
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests and framework:
- introduce _NULL and _NOT_NULL macros to pointer error checks
- rework kunit_resource allocation policy to fix memory leaks when
caller doesn't specify free() function to be used when allocating
memory using kunit_add_resource() and kunit_alloc_resource() funcs.
- add ability to specify suite-level init and exit functions"
* tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits)
kunit: tool: Use qemu-system-i386 for i386 runs
kunit: fix executor OOM error handling logic on non-UML
kunit: tool: update riscv QEMU config with new serial dependency
kcsan: test: use new suite_{init,exit} support
kunit: tool: Add list of all valid test configs on UML
kunit: take `kunit_assert` as `const`
kunit: tool: misc cleanups
kunit: tool: minor cosmetic cleanups in kunit_parser.py
kunit: tool: make parser stop overwriting status of suites w/ no_tests
kunit: tool: remove dead parse_crash_in_log() logic
kunit: tool: print clearer error message when there's no TAP output
kunit: tool: stop using a shell to run kernel under QEMU
kunit: tool: update test counts summary line format
kunit: bail out of test filtering logic quicker if OOM
lib/Kconfig.debug: change KUnit tests to default to KUNIT_ALL_TESTS
kunit: Rework kunit_resource allocation policy
kunit: fix debugfs code to use enum kunit_status, not bool
kfence: test: use new suite_{init/exit} support, add .kunitconfig
kunit: add ability to specify suite-level init and exit functions
kunit: rename print_subtest_{start,end} for clarity (s/subtest/suite)
...
This Kselftest update for Linux 5.19-rc1 consists of several fixes,
cleanups, and enhancements to tests:
- adds mips support for kprobe args string and syntax tests
- updates to resctrl test to use kselftest framework
- fixes, cleanups, and enhancements to tests
-----BEGIN PGP SIGNATURE-----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=MKRc
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests:
- add mips support for kprobe args string and syntax tests
- updates to resctrl test to use kselftest framework
- fixes, cleanups, and enhancements to tests"
* tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftests/ir : Improve readability of modprobe error message
selftests/resctrl: Fix null pointer dereference on open failed
selftests/resctrl: Add missing SPDX license to Makefile
selftests/resctrl: Update README about using kselftest framework to build/run resctrl_tests
selftests/resctrl: Make resctrl_tests run using kselftest framework
selftests/resctrl: Fix resctrl_tests' return code to work with selftest framework
selftests/resctrl: Change the default limited time to 120 seconds
selftests/resctrl: Kill child process before parent process terminates if SIGTERM is received
selftests/resctrl: Print a message if the result of MBM&CMT tests is failed on Intel CPU
selftests/resctrl: Extend CPU vendor detection
selftests/x86/corrupt_xstate_header: Use provided __cpuid_count() macro
selftests/x86/amx: Use provided __cpuid_count() macro
selftests/vm/pkeys: Use provided __cpuid_count() macro
selftests: Provide local define of __cpuid_count()
selftests/damon: add damon to selftests root Makefile
selftests/binderfs: Improve message to provide more info
selftests: mqueue: drop duplicate min definition
selftests/ftrace: add mips support for kprobe args syntax tests
selftests/ftrace: add mips support for kprobe args string tests
The default "timeout" for one kselftest is 45 seconds, while some cases in
run_vmtests.sh require more time. This will cause testing timeout like:
not ok 4 selftests: vm: run_vmtests.sh # TIMEOUT 45 seconds
Therefore, add the "settings" file with timeout variable so users can set
the "timeout" value.
Link: https://lkml.kernel.org/r/20220521083825.319654-4-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The "test_hmm.sh" file used by run_vmtests.sh dose not be installed into
INSTALL_PATH. Thus run_vmtests.sh can not call it in INSTALL_PATH:
---------------------------
running ./test_hmm.sh smoke
---------------------------
./run_vmtests.sh: line 74: ./test_hmm.sh: No such file or directory
[FAIL]
-----------------------
Add "test_hmm.sh" to TEST_FILES so that it will be installed.
Link: https://lkml.kernel.org/r/20220521083825.319654-3-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests: vm: a few fixup patches".
This series contains three fixup patches for vm selftests. They are
independent. Please see the patches.
This patch (of 3):
Currently, ksm_tests operates "merge_across_nodes" with NUMA either
enabled or disabled. In a system with NUMA disabled, these operations
will fail and output a misleading report given "merge_across_nodes" does
not exist in sysfs:
----------------------------
running ./ksm_tests -M -p 10
----------------------------
f /sys/kernel/mm/ksm/merge_across_nodes
fopen: No such file or directory
Cannot save default tunables
[FAIL]
----------------------
So check numa_available() before those operations to skip them if NUMA is
disabled.
Link: https://lkml.kernel.org/r/20220521083825.319654-1-patrick.wang.shcn@gmail.com
Link: https://lkml.kernel.org/r/20220521083825.319654-2-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Spelling mistake (triple letters) in comment. Detected with the help of
Coccinelle.
Link: https://lkml.kernel.org/r/20220521111145.81697-80-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce process_mrelease syscall sanity tests which include tests
which expect to fail:
- process_mrelease with invalid pidfd and flags inputs
- process_mrelease on a live process with no pending signals
and valid process_mrelease usage which is expected to succeed. Because
process_mrelease has to be used against a process with a pending SIGKILL,
it's possible that the process exits before process_mrelease gets called.
In such cases we retry the test with a victim that allocates twice more
memory up to 1GB. This would require the victim process to spend more
time during exit and process_mrelease has a better chance of catching the
process before it exits and succeeding.
On success the test reports the amount of memory the child had to allocate
for reaping to succeed. Sample output:
$ mrelease_test
Success reaping a child with 1MB of memory allocations
On failure the test reports the failure. Sample outputs:
$ mrelease_test
All process_mrelease attempts failed!
$ mrelease_test
process_mrelease: Invalid argument
Link: https://lkml.kernel.org/r/20220518204316.13131-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If the first goto is taken, 'fd' is not opened yet (and is un-initialized).
So a direct return is safer.
Link: https://lkml.kernel.org/r/628312312eb40e0e39463a2c06415fde5295c716.1653229120.git.christophe.jaillet@wanadoo.fr
Fixes: c1a31a2f7a ("cgroup: fix racy check in alloc_pagecache_max_30M() helper function")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: David Vernet <void@manifault.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fixing side effect of the so-called opportunistic change in the commit.
Fixes: dc8a9febbab0 ("KVM: selftests: x86: Fix test failure on arch lbr capable platforms")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518170118.66263-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
-----BEGIN PGP SIGNATURE-----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=Xznv
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-5.19-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 5.19
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=mh7W
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.19
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
[Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated
from 4 to 6. - Paolo]
On Arch LBR capable platforms, LBR_FMT in perf capability msr is 0x3f,
so the last format test will fail. Use a true invalid format(0x30) for
the test if it's running on these platforms. Opportunistically change
the file name to reflect the tests actually carried out.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220512084046.105479-1-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Important changes:
* improve the path_rename LSM hook implementations for RENAME_EXCHANGE;
* fix a too-restrictive filesystem control for a rare corner case;
* set the nested sandbox limitation to 16 layers;
* add a new LANDLOCK_ACCESS_FS_REFER access right to properly handle
file reparenting (i.e. full rename and link support);
* add new tests and documentation;
* format code with clang-format to make it easier to maintain and
contribute.
Related patch series:
* [PATCH v1 0/7] Landlock: Clean up coding style with clang-format
https://lore.kernel.org/r/20220506160513.523257-1-mic@digikod.net
* [PATCH v2 00/10] Minor Landlock fixes and new tests
https://lore.kernel.org/r/20220506160820.524344-1-mic@digikod.net
* [PATCH v3 00/12] Landlock: file linking and renaming support
https://lore.kernel.org/r/20220506161102.525323-1-mic@digikod.net
* [PATCH v2] landlock: Explain how to support Landlock
https://lore.kernel.org/r/20220513112743.156414-1-mic@digikod.net
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCYousmBAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSWToA/32m9xJhfppiTBHqw6Dt47v4sjuE/3ScwO/O
40rzaqs3AQD8AWHeqvPuM2lwPp1NQS4mcfv7K3DSCGBbUjHqdcl3Aw==
=+tJO
-----END PGP SIGNATURE-----
Merge tag 'landlock-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock updates from Mickaël Salaün:
- improve the path_rename LSM hook implementations for RENAME_EXCHANGE;
- fix a too-restrictive filesystem control for a rare corner case;
- set the nested sandbox limitation to 16 layers;
- add a new LANDLOCK_ACCESS_FS_REFER access right to properly handle
file reparenting (i.e. full rename and link support);
- add new tests and documentation;
- format code with clang-format to make it easier to maintain and
contribute.
* tag 'landlock-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (30 commits)
landlock: Explain how to support Landlock
landlock: Add design choices documentation for filesystem access rights
landlock: Document good practices about filesystem policies
landlock: Document LANDLOCK_ACCESS_FS_REFER and ABI versioning
samples/landlock: Add support for file reparenting
selftests/landlock: Add 11 new test suites dedicated to file reparenting
landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER
LSM: Remove double path_rename hook calls for RENAME_EXCHANGE
landlock: Move filesystem helpers and add a new one
landlock: Fix same-layer rule unions
landlock: Create find_rule() from unmask_layers()
landlock: Reduce the maximum number of layers to 16
landlock: Define access_mask_t to enforce a consistent access mask size
selftests/landlock: Test landlock_create_ruleset(2) argument check ordering
landlock: Change landlock_restrict_self(2) check ordering
landlock: Change landlock_add_rule(2) argument check ordering
selftests/landlock: Add tests for O_PATH
selftests/landlock: Fully test file rename with "remove" access
selftests/landlock: Extend access right tests to directories
selftests/landlock: Add tests for unknown access rights
...
- Initial support for the ARMv9 Scalable Matrix Extension (SME). SME
takes the approach used for vectors in SVE and extends this to provide
architectural support for matrix operations. No KVM support yet, SME
is disabled in guests.
- Support for crashkernel reservations above ZONE_DMA via the
'crashkernel=X,high' command line option.
- btrfs search_ioctl() fix for live-lock with sub-page faults.
- arm64 perf updates: support for the Hisilicon "CPA" PMU for monitoring
coherent I/O traffic, support for Arm's CMN-650 and CMN-700
interconnect PMUs, minor driver fixes, kerneldoc cleanup.
- Kselftest updates for SME, BTI, MTE.
- Automatic generation of the system register macros from a 'sysreg'
file describing the register bitfields.
- Update the type of the function argument holding the ESR_ELx register
value to unsigned long to match the architecture register size
(originally 32-bit but extended since ARMv8.0).
- stacktrace cleanups.
- ftrace cleanups.
- Miscellaneous updates, most notably: arm64-specific huge_ptep_get(),
avoid executable mappings in kexec/hibernate code, drop TLB flushing
from get_clear_flush() (and rename it to get_clear_contig()),
ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE.
-----BEGIN PGP SIGNATURE-----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=0DjE
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Initial support for the ARMv9 Scalable Matrix Extension (SME).
SME takes the approach used for vectors in SVE and extends this to
provide architectural support for matrix operations. No KVM support
yet, SME is disabled in guests.
- Support for crashkernel reservations above ZONE_DMA via the
'crashkernel=X,high' command line option.
- btrfs search_ioctl() fix for live-lock with sub-page faults.
- arm64 perf updates: support for the Hisilicon "CPA" PMU for
monitoring coherent I/O traffic, support for Arm's CMN-650 and
CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup.
- Kselftest updates for SME, BTI, MTE.
- Automatic generation of the system register macros from a 'sysreg'
file describing the register bitfields.
- Update the type of the function argument holding the ESR_ELx register
value to unsigned long to match the architecture register size
(originally 32-bit but extended since ARMv8.0).
- stacktrace cleanups.
- ftrace cleanups.
- Miscellaneous updates, most notably: arm64-specific huge_ptep_get(),
avoid executable mappings in kexec/hibernate code, drop TLB flushing
from get_clear_flush() (and rename it to get_clear_contig()),
ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (145 commits)
arm64/sysreg: Generate definitions for FAR_ELx
arm64/sysreg: Generate definitions for DACR32_EL2
arm64/sysreg: Generate definitions for CSSELR_EL1
arm64/sysreg: Generate definitions for CPACR_ELx
arm64/sysreg: Generate definitions for CONTEXTIDR_ELx
arm64/sysreg: Generate definitions for CLIDR_EL1
arm64/sve: Move sve_free() into SVE code section
arm64: Kconfig.platforms: Add comments
arm64: Kconfig: Fix indentation and add comments
arm64: mm: avoid writable executable mappings in kexec/hibernate code
arm64: lds: move special code sections out of kernel exec segment
arm64/hugetlb: Implement arm64 specific huge_ptep_get()
arm64/hugetlb: Use ptep_get() to get the pte value of a huge page
arm64: kdump: Do not allocate crash low memory if not needed
arm64/sve: Generate ZCR definitions
arm64/sme: Generate defintions for SVCR
arm64/sme: Generate SMPRI_EL1 definitions
arm64/sme: Automatically generate SMPRIMAP_EL2 definitions
arm64/sme: Automatically generate SMIDR_EL1 defines
arm64/sme: Automatically generate defines for SMCR
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-05-23
We've added 113 non-merge commits during the last 26 day(s) which contain
a total of 121 files changed, 7425 insertions(+), 1586 deletions(-).
The main changes are:
1) Speed up symbol resolution for kprobes multi-link attachments, from Jiri Olsa.
2) Add BPF dynamic pointer infrastructure e.g. to allow for dynamically sized ringbuf
reservations without extra memory copies, from Joanne Koong.
3) Big batch of libbpf improvements towards libbpf 1.0 release, from Andrii Nakryiko.
4) Add BPF link iterator to traverse links via seq_file ops, from Dmitrii Dolgov.
5) Add source IP address to BPF tunnel key infrastructure, from Kaixi Fan.
6) Refine unprivileged BPF to disable only object-creating commands, from Alan Maguire.
7) Fix JIT blinding of ld_imm64 when they point to subprogs, from Alexei Starovoitov.
8) Add BPF access to mptcp_sock structures and their meta data, from Geliang Tang.
9) Add new BPF helper for access to remote CPU's BPF map elements, from Feng Zhou.
10) Allow attaching 64-bit cookie to BPF link of fentry/fexit/fmod_ret, from Kui-Feng Lee.
11) Follow-ups to typed pointer support in BPF maps, from Kumar Kartikeya Dwivedi.
12) Add busy-poll test cases to the XSK selftest suite, from Magnus Karlsson.
13) Improvements in BPF selftest test_progs subtest output, from Mykola Lysenko.
14) Fill bpf_prog_pack allocator areas with illegal instructions, from Song Liu.
15) Add generic batch operations for BPF map-in-map cases, from Takshak Chahande.
16) Make bpf_jit_enable more user friendly when permanently on 1, from Tiezhu Yang.
17) Fix an array overflow in bpf_trampoline_get_progs(), from Yuntao Wang.
====================
Link: https://lore.kernel.org/r/20220523223805.27931-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds tests for dynptrs, which include cases that the
verifier needs to reject (for example, a bpf_ringbuf_reserve_dynptr
without a corresponding bpf_ringbuf_submit/discard_dynptr) as well
as cases that should successfully pass.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-7-joannelkoong@gmail.com
This pull request contains the following branches:
docs.2022.04.20a: Documentation updates.
fixes.2022.04.20a: Miscellaneous fixes.
nocb.2022.04.11b: Callback-offloading updates, mainly simplifications.
rcu-tasks.2022.04.11b: RCU-tasks updates, including some -rt fixups,
handling of systems with sparse CPU numbering, and a fix for a
boot-time race-condition failure.
srcu.2022.05.03a: Put SRCU on a memory diet in order to reduce the size
of the srcu_struct structure.
torture.2022.04.11b: Torture-test updates fixing some bugs in tests and
closing some testing holes.
torture-tasks.2022.04.20a: Torture-test updates for the RCU tasks flavors,
most notably ensuring that building rcutorture and friends does
not change the RCU-tasks-related Kconfig options.
torturescript.2022.04.20a: Torture-test scripting updates.
exp.2022.05.11a: Expedited grace-period updates, most notably providing
milliseconds-scale (not all that) soft real-time response from
synchronize_rcu_expedited(). This is also the first time in
almost 30 years of RCU that someone other than me has pushed
for a reduction in the RCU CPU stall-warning timeout, in this
case by more than three orders of magnitude from 21 seconds to
20 milliseconds. This tighter timeout applies only to expedited
grace periods.
-----BEGIN PGP SIGNATURE-----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=4spH
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.05.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU update from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offloading updates, mainly simplifications
- RCU-tasks updates, including some -rt fixups, handling of systems
with sparse CPU numbering, and a fix for a boot-time race-condition
failure
- Put SRCU on a memory diet in order to reduce the size of the
srcu_struct structure
- Torture-test updates fixing some bugs in tests and closing some
testing holes
- Torture-test updates for the RCU tasks flavors, most notably ensuring
that building rcutorture and friends does not change the
RCU-tasks-related Kconfig options
- Torture-test scripting updates
- Expedited grace-period updates, most notably providing
milliseconds-scale (not all that) soft real-time response from
synchronize_rcu_expedited().
This is also the first time in almost 30 years of RCU that someone
other than me has pushed for a reduction in the RCU CPU stall-warning
timeout, in this case by more than three orders of magnitude from 21
seconds to 20 milliseconds. This tighter timeout applies only to
expedited grace periods
* tag 'rcu.2022.05.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
rcu: Move expedited grace period (GP) work to RT kthread_worker
rcu: Introduce CONFIG_RCU_EXP_CPU_STALL_TIMEOUT
srcu: Drop needless initialization of sdp in srcu_gp_start()
srcu: Prevent expedited GPs and blocking readers from consuming CPU
srcu: Add contention check to call_srcu() srcu_data ->lock acquisition
srcu: Automatically determine size-transition strategy at boot
rcutorture: Make torture.sh allow for --kasan
rcutorture: Make torture.sh refscale and rcuscale specify Tasks Trace RCU
rcutorture: Make kvm.sh allow more memory for --kasan runs
torture: Save "make allmodconfig" .config file
scftorture: Remove extraneous "scf" from per_version_boot_params
rcutorture: Adjust scenarios' Kconfig options for CONFIG_PREEMPT_DYNAMIC
torture: Enable CSD-lock stall reports for scftorture
torture: Skip vmlinux check for kvm-again.sh runs
scftorture: Adjust for TASKS_RCU Kconfig option being selected
rcuscale: Allow rcuscale without RCU Tasks Rude/Trace
rcuscale: Allow rcuscale without RCU Tasks
refscale: Allow refscale without RCU Tasks Rude/Trace
refscale: Allow refscale without RCU Tasks
rcutorture: Allow specifying per-scenario stat_interval
...
These test suites try to check all edge cases for directory and file
renaming or linking involving a new parent directory, with and without
LANDLOCK_ACCESS_FS_REFER and other access rights.
layout1:
* reparent_refer: Tests simple FS_REFER usage.
* reparent_link: Tests a mix of FS_MAKE_REG and FS_REFER with links.
* reparent_rename: Tests a mix of FS_MAKE_REG and FS_REFER with renames
and RENAME_EXCHANGE.
* reparent_exdev_layers_rename1/2: Tests renames with two layers.
* reparent_exdev_layers_exchange1/2/3: Tests exchanges with two layers.
* reparent_remove: Tests file and directory removal with rename.
* reparent_dom_superset: Tests access partial ordering.
layout1_bind:
* reparent_cross_mount: Tests FS_REFER propagation across mount points.
Test coverage for security/landlock is 95.4% of 604 lines according to
gcc/gcov-11.
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506161102.525323-9-mic@digikod.net
Add a new LANDLOCK_ACCESS_FS_REFER access right to enable policy writers
to allow sandboxed processes to link and rename files from and to a
specific set of file hierarchies. This access right should be composed
with LANDLOCK_ACCESS_FS_MAKE_* for the destination of a link or rename,
and with LANDLOCK_ACCESS_FS_REMOVE_* for a source of a rename. This
lift a Landlock limitation that always denied changing the parent of an
inode.
Renaming or linking to the same directory is still always allowed,
whatever LANDLOCK_ACCESS_FS_REFER is used or not, because it is not
considered a threat to user data.
However, creating multiple links or renaming to a different parent
directory may lead to privilege escalations if not handled properly.
Indeed, we must be sure that the source doesn't gain more privileges by
being accessible from the destination. This is handled by making sure
that the source hierarchy (including the referenced file or directory
itself) restricts at least as much the destination hierarchy. If it is
not the case, an EXDEV error is returned, making it potentially possible
for user space to copy the file hierarchy instead of moving or linking
it.
Instead of creating different access rights for the source and the
destination, we choose to make it simple and consistent for users.
Indeed, considering the previous constraint, it would be weird to
require such destination access right to be also granted to the source
(to make it a superset). Moreover, RENAME_EXCHANGE would also add to
the confusion because of paths being both a source and a destination.
See the provided documentation for additional details.
New tests are provided with a following commit.
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506161102.525323-8-mic@digikod.net
The original behavior was to check if the full set of requested accesses
was allowed by at least a rule of every relevant layer. This didn't
take into account requests for multiple accesses and same-layer rules
allowing the union of these accesses in a complementary way. As a
result, multiple accesses requested on a file hierarchy matching rules
that, together, allowed these accesses, but without a unique rule
allowing all of them, was illegitimately denied. This case should be
rare in practice and it can only be triggered by the path_rename or
file_open hook implementations.
For instance, if, for the same layer, a rule allows execution
beneath /a/b and another rule allows read beneath /a, requesting access
to read and execute at the same time for /a/b should be allowed for this
layer.
This was an inconsistency because the union of same-layer rule accesses
was already allowed if requested once at a time anyway.
This fix changes the way allowed accesses are gathered over a path walk.
To take into account all these rule accesses, we store in a matrix all
layer granting the set of requested accesses, according to the handled
accesses. To avoid heap allocation, we use an array on the stack which
is 2*13 bytes. A following commit bringing the LANDLOCK_ACCESS_FS_REFER
access right will increase this size to reach 112 bytes (2*14*4) in case
of link or rename actions.
Add a new layout1.layer_rule_unions test to check that accesses from
different rules pertaining to the same layer are ORed in a file
hierarchy. Also test that it is not the case for rules from different
layers.
Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20220506161102.525323-5-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
The maximum number of nested Landlock domains is currently 64. Because
of the following fix and to help reduce the stack size, let's reduce it
to 16. This seems large enough for a lot of use cases (e.g. sandboxed
init service, spawning a sandboxed SSH service, in nested sandboxed
containers). Reducing the number of nested domains may also help to
discover misuse of Landlock (e.g. creating a domain per rule).
Add and use a dedicated layer_mask_t typedef to fit with the number of
layers. This might be useful when changing it and to keep it consistent
with the maximum number of layers.
Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20220506161102.525323-3-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add inval_create_ruleset_arguments, extension of
inval_create_ruleset_flags, to also check error ordering for
landlock_create_ruleset(2).
This is similar to the previous commit checking landlock_add_rule(2).
Test coverage for security/landlock is 94.4% of 504 lines accorging to
gcc/gcov-11.
Link: https://lore.kernel.org/r/20220506160820.524344-11-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
According to the Landlock goal to be a security feature available to
unprivileges processes, it makes more sense to first check for
no_new_privs before checking anything else (i.e. syscall arguments).
Merge inval_fd_enforce and unpriv_enforce_without_no_new_privs tests
into the new restrict_self_checks_ordering. This is similar to the
previous commit checking other syscalls.
Link: https://lore.kernel.org/r/20220506160820.524344-10-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
This makes more sense to first check the ruleset FD and then the rule
attribute. It will be useful to factor out code for other rule types.
Add inval_add_rule_arguments tests, extension of empty_path_beneath_attr
tests, to also check error ordering for landlock_add_rule(2).
Link: https://lore.kernel.org/r/20220506160820.524344-9-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
These tests were missing to check the check_access_path() call with all
combinations of maybe_remove(old_dentry) and maybe_remove(new_dentry).
Extend layout1.link with a new complementary test and check that
REMOVE_FILE is not required to link a file.
Cc: Shuah Khan <shuah@kernel.org>
Link: https://lore.kernel.org/r/20220506160820.524344-7-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Make sure that all filesystem access rights can be tied to directories.
Rename layout1.file_access_rights to layout1.file_and_dir_access_rights
to reflect this change.
Cc: Shuah Khan <shuah@kernel.org>
Link: https://lore.kernel.org/r/20220506160820.524344-6-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Replace SYS_<syscall> with __NR_<syscall>. Using the __NR_<syscall>
notation, provided by UAPI, is useful to build tests on systems without
the SYS_<syscall> definitions.
Replace SYS_pivot_root with __NR_pivot_root, and SYS_move_mount with
__NR_move_mount.
Define renameat2() and RENAME_EXCHANGE if they are unknown to old build
systems.
Cc: Shuah Khan <shuah@kernel.org>
Link: https://lore.kernel.org/r/20220506160820.524344-3-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Use the standard interface order h1, swp1, swp2, h2 that is used by the
forwarding selftest framework. The previous order was confusing even
with the ASCII drawing. That isn't needed anymore.
This also drops the fixed MAC addresses and uses STABLE_MAC_ADDRS, which
ensures the MAC addresses are unique.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a robotic rename as follows:
eth0 -> swp1
eth1 -> swp2
eth2 -> h2
eth3 -> h1
This brings the selftest more in line with the other forwarding
selftests, where h1 is connected to swp1, and h2 to swp2.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bring this driver-specific selftest output in line with the other
selftests.
Before:
Testing VLAN pop.. OK
Testing VLAN push.. OK
Testing ingress VLAN modification.. OK
Testing egress VLAN modification.. OK
Testing frame prioritization.. OK
After:
TEST: VLAN pop [ OK ]
TEST: VLAN push [ OK ]
TEST: Ingress VLAN modification [ OK ]
TEST: Egress VLAN modification [ OK ]
TEST: Frame prioritization [ OK ]
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add newly added stress_reuseport_listen object to .gitignore file.
Fixes: ec8cb4f617 ("net: selftests: Stress reuseport listen")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 3752e453f6 ("selftests/powerpc: Add tests of PMU EBBs") added
selftest testcases to verify EBB interface. instruction_count_test.c
testcase needs a fixed loop function to count overhead. Instead of using
the thirty_two_instruction_loop() in fixed_instruction_loop.S in ebb
folder, file is linked with thirty_two_instruction_loop() in loop.S from
top folder. Since fixed_instruction_loop.S not used, patch removes the
file.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220322045638.10443-1-maddy@linux.ibm.com
In commit f3054ffd71 ("selftests/powerpc: Return skip code for
spectre_v2"), the spectre_v2 selftest is updated to be aware of cases
where the vulnerability status reported in sysfs is incorrect, skipping
the test instead.
This happens because qemu can misrepresent the mitigation status of the
host to the guest. If the count cache is disabled in the host, and this
is correctly reported to the guest, then the guest won't apply
mitigations. If the guest is then migrated to a new host where
mitigations are necessary, it is now vulnerable because it has not
applied mitigations.
Update the selftest to report when we see excessive misses, indicative of
the count cache being disabled. If software flushing is enabled, also
warn that these flushes are just wasting performance.
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Rebase and update change log appropriately]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210608064809.199116-1-ruscur@russell.cc
* Correctly expose GICv3 support even if no irqchip is created
so that userspace doesn't observe it changing pointlessly
(fixing a regression with QEMU)
* Don't issue a hypercall to set the id-mapped vectors when
protected mode is enabled (fix for pKVM in combination with
CPUs affected by Spectre-v3a)
x86: Five oneliners, of which the most interesting two are:
* a NULL pointer dereference on INVPCID executed with
paging disabled, but only if KVM is using shadow paging
* an incorrect bsearch comparison function which could truncate
the result and apply PMU event filtering incorrectly. This one
comes with a selftests update too.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKH1qYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMadgf9E1u5skRjtv+RWPbfs/v3irnirY/L
x5TaVb2yiPahNH5qgFL2xnJ9jCcCNlxxn5uKpEAi0JFrqc6uCS0Rh1TPfqEN0lLt
5PGJD2JSKXAWVRkObS3j5iZuQX4ZvDRY53eSQv6pdcU+evjTq1H5WZ83uciqo0J5
xilKEtUIpJ9o0ELw9BjAd3vlRlOPpveHq+48DJN7cO0L/eju9Lz9kqJQTE7WQato
SsmpXPNIaSlk3U3yWAfOYgzyVkZQW/JiKS++TfVr5VQMppbOI6bxo3UfDAygiA9e
9KZAWrwoXqDMNp9756Y6lfT7g8PblnXgOvTXa/cV+ypaeAuuTU/iBSLwxQ==
=gWsP
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly expose GICv3 support even if no irqchip is created so
that userspace doesn't observe it changing pointlessly (fixing a
regression with QEMU)
- Don't issue a hypercall to set the id-mapped vectors when protected
mode is enabled (fix for pKVM in combination with CPUs affected by
Spectre-v3a)
x86 (five oneliners, of which the most interesting two are):
- a NULL pointer dereference on INVPCID executed with paging
disabled, but only if KVM is using shadow paging
- an incorrect bsearch comparison function which could truncate the
result and apply PMU event filtering incorrectly. This one comes
with a selftests update too"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: fix NULL pointer dereference on guest INVPCID
KVM: x86: hyper-v: fix type of valid_bank_mask
KVM: Free new dirty bitmap if creating a new memslot fails
KVM: eventfd: Fix false positive RCU usage warning
selftests: kvm/x86: Verify the pmu event filter matches the correct event
selftests: kvm/x86: Add the helper function create_pmu_event_filter
kvm: x86/pmu: Fix the compare function used by the pmu event filter
KVM: arm64: Don't hypercall before EL2 init
KVM: arm64: vgic-v3: Consistently populate ID_AA64PFR0_EL1.GIC
KVM: x86/mmu: Update number of zapped pages even if page list is stable
tests load/attach bpf prog with maps, perfbuf and ringbuf, pinning
them. Then effective caps are dropped and we verify we can
- pick up the pin
- create ringbuf/perfbuf
- get ringbuf/perfbuf events, carry out map update, lookup and delete
- create a link
Negative testing also ensures
- BPF prog load fails
- BPF map create fails
- get fd by id fails
- get next id fails
- query fails
- BTF load fails
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/1652970334-30510-3-git-send-email-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test populates the bhash table for a given port with
MAX_THREADS * MAX_CONNECTIONS sockets, and then times how long
a bind request on the port takes.
When populating the bhash table, we create the sockets and then bind
the sockets to the same address and port (SO_REUSEADDR and SO_REUSEPORT
are set). When timing how long a bind on the port takes, we bind on a
different address without SO_REUSEPORT set. We do not set SO_REUSEPORT
because we are interested in the case where the bind request does not
go through the tb->fastreuseport path, which is fragile (eg
tb->fastreuseport path does not work if binding with a different uid).
To run the test locally, I did:
* ulimit -n 65535000
* ip addr add 2001:0db8:0:f101::1 dev eth0
* ./bind_bhash_test 443
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 49bb39bdda ("selftests: fib_nexthops: Make the test more robust")
increased the timeout of ping commands to 5 seconds, to make the test
more robust. Make the timeout configurable using '-w' argument to allow
user to change it depending on the system that runs the test. Some systems
suffer from slow forwarding performance, so they may need to change the
timeout.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220519070921.3559701-1-amcohen@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the trampoline_count test doesn't include any fmod_ret bpf
programs, fix it to make the test cover all possible trampoline program
types.
Since fmod_ret bpf programs can't be attached to __set_task_comm function,
as it's neither whitelisted for error injection nor a security hook, change
it to bpf_modify_return_test.
This patch also does some other cleanups such as removing duplicate code,
dropping inconsistent comments, etc.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220519150610.601313-1-ytcoode@gmail.com
This patch verifies the 'first' struct member of struct mptcp_sock, which
points to the first subflow of msk. Save 'sk' in mptcp_storage, and verify
it with 'first' in verify_msk().
v5:
- Use ASSERT_EQ() instead of a manual comparison + log (Andrii).
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-8-mathew.j.martineau@linux.intel.com
This patch verifies another member of struct mptcp_sock, ca_name. Add a
new function get_msk_ca_name() to read the sysctl tcp_congestion_control
and verify it in verify_msk().
v3: Access the sysctl through the filesystem to avoid compatibility
issues with the busybox sysctl command.
v4: use ASSERT_* instead of CHECK_FAIL (Andrii)
v5: use ASSERT_STRNEQ() instead of strncmp() (Andrii)
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-7-mathew.j.martineau@linux.intel.com
This patch verifies the struct member token of struct mptcp_sock. Add a
new member token in struct mptcp_storage to store the token value of the
msk socket got by bpf_skc_to_mptcp_sock(). Trace the kernel function
mptcp_pm_new_connection() by using bpf fentry prog to obtain the msk token
and save it in a global bpf variable. Pass the variable to verify_msk() to
verify it with the token saved in socket_storage_map.
v4:
- use ASSERT_* instead of CHECK_FAIL (Andrii)
- skip the test if 'ip mptcp monitor' is not supported (Mat)
v5:
- Drop 'ip mptcp monitor', trace mptcp_pm_new_connection instead (Martin)
- Use ASSERT_EQ (Andrii)
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-6-mathew.j.martineau@linux.intel.com
This patch extends the MPTCP test base, to test the new helper
bpf_skc_to_mptcp_sock().
Define struct mptcp_sock in bpf_tcp_helpers.h, use bpf_skc_to_mptcp_sock
to get the msk socket in progs/mptcp_sock.c and store the infos in
socket_storage_map.
Get the infos from socket_storage_map in prog_tests/mptcp.c. Add a new
function verify_msk() to verify the infos of MPTCP socket, and rename
verify_sk() to verify_tsk() to verify TCP socket only.
v2: Add CONFIG_MPTCP check for clearer error messages
v4:
- use ASSERT_* instead of CHECK_FAIL (Andrii)
- drop bpf_mptcp_helpers.h (Andrii)
v5:
- some 'ASSERT_*' were replaced in the next commit by mistake.
- Drop CONFIG_MPTCP (Martin)
- Use ASSERT_EQ (Andrii)
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-5-mathew.j.martineau@linux.intel.com
This patch adds a base for MPTCP specific tests.
It is currently limited to the is_mptcp field in case of plain TCP
connection because there is no easy way to get the subflow sk from a msk
in userspace. This implies that we cannot lookup the sk_storage attached
to the subflow sk in the sockops program.
v4:
- add copyright 2022 (Andrii)
- use ASSERT_* instead of CHECK_FAIL (Andrii)
- drop SEC("version") (Andrii)
- use is_mptcp in tcp_sock, instead of bpf_tcp_sock (Martin & Andrii)
v5:
- Drop connect_to_mptcp_fd (Martin)
- Use BPF test skeleton (Andrii)
- Use ASSERT_EQ (Andrii)
- Drop the 'msg' parameter of verify_sk
Co-developed-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-4-mathew.j.martineau@linux.intel.com
CONFIG_IKCONFIG_PROC is required by BPF selftests, otherwise we get
errors like this:
libbpf: failed to open system Kconfig
libbpf: failed to load object 'kprobe_multi'
libbpf: failed to load BPF skeleton 'kprobe_multi': -22
It's because /proc/config.gz is opened in bpf_object__read_kconfig_file()
in tools/lib/bpf/libbpf.c:
file = gzopen("/proc/config.gz", "r");
So this patch enables CONFIG_IKCONFIG and CONFIG_IKCONFIG_PROC in
tools/testing/selftests/bpf/config.
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220519233016.105670-3-mathew.j.martineau@linux.intel.com
comments from Andrii Nakryiko, details in here:
https://lore.kernel.org/lkml/20220511093854.411-1-zhoufeng.zf@bytedance.com/T/
use /* */ instead of //
use libbpf_num_possible_cpus() instead of sysconf(_SC_NPROCESSORS_ONLN)
use 8 bytes for value size
fix memory leak
use ASSERT_EQ instead of ASSERT_OK
add bpf_loop to fetch values on each possible CPU
Fixes: ed7c13776e ("selftests/bpf: add test case for bpf_map_lookup_percpu_elem")
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220518025053.20492-1-zhoufeng.zf@bytedance.com
Check that suppression is not indicated on injection of a key checked
protection exception caused by a memop after it already modified guest
memory, as that violates the definition of suppression.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220512131019.2594948-3-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Adds some selftests to test ioctl error paths of the uv-uapi.
The Kconfig S390_UV_UAPI must be selected and the Ultravisor facility
must be available. The test can be executed by non-root, however, the
uvdevice special file /dev/uv must be accessible for reading and
writing which may imply root privileges.
./test-uv-device
TAP version 13
1..6
# Starting 6 tests from 3 test cases.
# RUN uvio_fixture.att.fault_ioctl_arg ...
# OK uvio_fixture.att.fault_ioctl_arg
ok 1 uvio_fixture.att.fault_ioctl_arg
# RUN uvio_fixture.att.fault_uvio_arg ...
# OK uvio_fixture.att.fault_uvio_arg
ok 2 uvio_fixture.att.fault_uvio_arg
# RUN uvio_fixture.att.inval_ioctl_cb ...
# OK uvio_fixture.att.inval_ioctl_cb
ok 3 uvio_fixture.att.inval_ioctl_cb
# RUN uvio_fixture.att.inval_ioctl_cmd ...
# OK uvio_fixture.att.inval_ioctl_cmd
ok 4 uvio_fixture.att.inval_ioctl_cmd
# RUN attest_fixture.att_inval_request ...
# OK attest_fixture.att_inval_request
ok 5 attest_fixture.att_inval_request
# RUN attest_fixture.att_inval_addr ...
# OK attest_fixture.att_inval_addr
ok 6 attest_fixture.att_inval_addr
# PASSED: 6 / 6 tests passed.
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20220510144724.3321985-3-seiden@linux.ibm.com>
Link: https://lore.kernel.org/kvm/20220510144724.3321985-3-seiden@linux.ibm.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Add a test to demonstrate that when the guest programs an event select
it is matched correctly in the pmu event filter and not inadvertently
filtered. This could happen on AMD if the high nybble[1] in the event
select gets truncated away only leaving the bottom byte[2] left for
matching.
This is a contrived example used for the convenience of demonstrating
this issue, however, this can be applied to event selects 0x28A (OC
Mode Switch) and 0x08A (L1 BTB Correction), where 0x08A could end up
being denied when the event select was only set up to deny 0x28A.
[1] bits 35:32 in the event select register and bits 11:8 in the event
select.
[2] bits 7:0 in the event select register and bits 7:0 in the event
select.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220517051238.2566934-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper function that creates a pmu event filter given an event
list. Currently, a pmu event filter can only be created with the same
hard coded event list. Add a way to create one given a different event
list.
Also, rename make_pmu_event_filter to alloc_pmu_event_filter to clarify
it's purpose given the introduction of create_pmu_event_filter.
No functional changes intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220517051238.2566934-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, we simply hang using "while (1) ;" upon any unexpected
guest traps because the default guest trap handler is guest_hang().
The above approach is not useful to anyone because KVM selftests
users will only see a hung application upon any unexpected guest
trap.
This patch improves unexpected guest trap handling for KVM RISC-V
selftests by doing the following:
1) Return to host user-space
2) Dump VCPU registers
3) Die using TEST_ASSERT(0, ...)
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add the multiple subflows test case for MP_FAIL, to test the MP_FAIL
reset case. Use the test_linkfail value to make 1024KB test files.
Invoke reset_with_fail() to use 'iptables' and 'tc action pedit' rules
to produce the bit flips to trigger the checksum failures on ns2eth2.
Add delays on ns2eth1 to make sure more data can translate on ns2eth2.
The check_invert flag is enabled in reset_with_fail(), so this test
prints out the inverted bytes, instead of the file mismatch errors.
Invoke pedit_action_pkts() to get the numbers of the packets edited
by the tc pedit actions, and print this numbers to the output.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The port driver maps component registers for port operations. Reuse that
mapping for HDM Decoder Capability setup / enable. Move
devm_cxl_setup_hdm() before cxl_hdm_decode_init() and plumb @cxlhdm
through the hdm init helpers.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165291691712.1426646.14336397551571515480.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that nothing external to cxl_hdm_decode_init() considers
'struct cxl_endpoint_dvec_info' move it internal to
cxl_hdm_decode_init().
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165291690612.1426646.7866084245521113414.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for changing how the driver handles 'mem_enable' in the CXL
DVSEC control register. Merge the contents of cxl_hdm_decode_init() into
cxl_dvsec_ranges() and rename the combined function cxl_hdm_decode_init().
The possible cleanups and fixes that result from this merge are saved for a
follow-on change.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/165291690027.1426646.10249756632415633752.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for fixing the setting of the 'mem_enabled' bit in CXL
DVSEC Control register, move all CXL DVSEC range enumeration into the
same source file.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165291688886.1426646.15046138604010482084.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Allow cxl_await_media_ready() to be mocked for testing purposes rather
than carrying the maintenance burden of an indirect function call in the
mainline driver.
With the move cxl_await_media_ready() can no longer reuse the mailbox
timeout override, so add a media_ready_timeout module parameter to the
core to backfill.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165291688340.1426646.4755627801983775011.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
netfilter subtrees.
Notably this reverts a recent TCP/DCCP netns-related change
to address a possible UaF.
Current release - regressions:
- tcp: revert "tcp/dccp: get rid of inet_twsk_purge()"
- xfrm: set dst dev to blackhole_netdev instead of loopback_dev in ifdown
Previous releases - regressions:
- netfilter: flowtable: fix TCP flow teardown
- can: revert "can: m_can: pci: use custom bit timings for Elkhart Lake"
- xfrm: check encryption module availability consistency
- eth: vmxnet3: fix possible use-after-free bugs in vmxnet3_rq_alloc_rx_buf()
- eth: mlx5: initialize flow steering during driver probe
- eth: ice: fix crash when writing timestamp on RX rings
Previous releases - always broken:
- mptcp: fix checksum byte order
- eth: lan966x: fix assignment of the MAC address
- eth: mlx5: remove HW-GRO from reported features
- eth: ftgmac100: disable hardware checksum on AST2600
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmKGAYYSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkrt8P/2GyYNQT7q0h3Plsxc/m1tIUCPiERROE
zIU0R2QVc64xpkMISeVb3YYpa3eqhtQsNWgt7Xsr1NRXBmyx60dvGpS81w8Gnxuo
ruA7SxnH6OA0usviiYPmeGP9emvCEkO5YRW5kxl1Cpum19yNxjfZKJ6ARk0IDp/D
C1S91PYtF9s25Yytrlpv9lVVBvTHQxg2EQocZHxO+7/j2O8jJP/NAYltpVaRNC2W
gLcOWTAujrjAfpdsBhJsWXv4dTCQOAgnIXYP9P1JdFMAZtkXoYQUjaXP7dsaAXHw
iE9FBRkqDKVhj94CxR6VPOSo0kVvOuBfkc1eJeZ74lvahkHBq4EyiVCo6/JhNQTd
/bi/mTeUlI9yYyu/j9lMDy4CwOuiB69Dl4vNR/G5C1rF7l1vQkZr50pnD96MePwu
9fR5+ipZsDhj5c77OMiraqnnOyWXVtD2YCZCCw80a9/aWG4zxcIDtnNQIfqAACvx
0wNgG2bPSKRablytep1Qs84Vvupaa1cC2eTBbA+6LzQqk3CR9/YMUSD6MXitxQyD
RJYbm5QMqdW2QH8zE21E+8wzIPeN9m66lJFppuntuB+I/CHWAnP/CmdbWysR3FQ+
5ZisPh4PUqb1VIzGKUbym/D9FB20Vc8zq6oQa8LqiIOODUrxQMg3F2O43OWsYsn3
TDNCwo5BQ/Z8
=C848
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, xfrm and netfilter subtrees.
Notably this reverts a recent TCP/DCCP netns-related change to address
a possible UaF.
Current release - regressions:
- tcp: revert "tcp/dccp: get rid of inet_twsk_purge()"
- xfrm: set dst dev to blackhole_netdev instead of loopback_dev in
ifdown
Previous releases - regressions:
- netfilter: flowtable: fix TCP flow teardown
- can: revert "can: m_can: pci: use custom bit timings for Elkhart
Lake"
- xfrm: check encryption module availability consistency
- eth: vmxnet3: fix possible use-after-free bugs in
vmxnet3_rq_alloc_rx_buf()
- eth: mlx5: initialize flow steering during driver probe
- eth: ice: fix crash when writing timestamp on RX rings
Previous releases - always broken:
- mptcp: fix checksum byte order
- eth: lan966x: fix assignment of the MAC address
- eth: mlx5: remove HW-GRO from reported features
- eth: ftgmac100: disable hardware checksum on AST2600"
* tag 'net-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.
ptp: ocp: change sysfs attr group handling
selftests: forwarding: fix missing backslash
netfilter: nf_tables: disable expression reduction infra
netfilter: flowtable: move dst_check to packet path
netfilter: flowtable: fix TCP flow teardown
net: ftgmac100: Disable hardware checksum on AST2600
igb: skip phy status check where unavailable
nfc: pn533: Fix buggy cleanup order
mptcp: Do TCP fallback on early DSS checksum failure
mptcp: fix checksum byte order
net: af_key: check encryption module availability consistency
net: af_key: add check for pfkey_broadcast in function pfkey_process
net/mlx5: Drain fw_reset when removing device
net/mlx5e: CT: Fix setting flow_source for smfs ct tuples
net/mlx5e: CT: Fix support for GRE tuples
net/mlx5e: Remove HW-GRO from reported features
net/mlx5e: Properly block HW GRO when XDP is enabled
net/mlx5e: Properly block LRO when XDP is enabled
net/mlx5e: Block rx-gro-hw feature in switchdev mode
...
- Test for new usercopy memory regions
- avoid GCC 12 warnings
- update expected CONFIGs for selftests
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmKEGMoWHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJjWvEACa7AYibyhPaikabil0r+qnU5Vr
GBbRZbs7+lzzOL7UAJ8VRwNnw3sqsaEKo7phqJRqYvo/etzUGUNtIUFCPMHpw15R
sICXpedImOjeVjMYs4FCccEKGlIz0DMXKhNVvMT/IgLANiSwTMjCUGAVWVIf6OtO
oXPl5nE3ZIyNYhMPv7hpJ2DB+eEsKqpKv0xkAiZnGpWFhJF0Zex7wb88QAWWO1BP
po02NdnvA/f6PIYdpMBlm3UjpGSCD3PfiH+grjZGilGMgVcFoVQJdSSvGPhip6/G
3DVmkSZZe4ldRePn0aJKrwm8bZnqfXgYlu7IKi7y9PSmD8URAtC5PkmnGwkcYxq7
esA9NPJFflzeNxxB6HbH3Dq1DOXiGUi3vQ6SiNieGOtNnCgynrmOtnRrjumG8sZg
hdcuXbL0TCOkvy5jQVaLcZfUbH4/hLg1x5qZ2GOl2UKZ69BM0812IQkXOQqBGbKV
bQvjflwvBvZ/reuBNfQz10BDTnHL60jFjCNkA5K6+/iziat0/D2JfQ8dDk6I/ywn
rXrFnZmXio0WF4lSbEp54l+a1gcNz3Ngi1VJnzDwRifykfIXGFkp8gnWOFymyJ9Z
A4W0+yjDkwVsyQcZktS5r9MXhOiEJY+V15k0Rj6mOLRK67sqtgpYbNYZahiyHux4
91DKbOLQlVN7562GYg==
=CiSx
-----END PGP SIGNATURE-----
Merge tag 'lkdtm-next' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-next
Kees writes:
lkdtm updates for -next
- Test for new usercopy memory regions
- avoid GCC 12 warnings
- update expected CONFIGs for selftests
* tag 'lkdtm-next' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/heap: Hide allocation size from -Warray-bounds
selftests/lkdtm: Add configs for stackleak and "after free" tests
lkdtm/usercopy: Check vmalloc and >0-order folios
lkdtm/usercopy: Rename "heap" to "slab"
lkdtm: cfi: Fix type width for masking PAC bits
Fix missing backslash, introduced in f62c5acc80. Causes all tests to
not be installed.
Fixes: f62c5acc80 ("selftests/net/forwarding: add missing tests to Makefile")
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20220518151630.2747773-1-troglobit@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When build bpf test and install it to another folder, e.g.
make -j10 install -C tools/testing/selftests/ TARGETS="bpf" \
SKIP_TARGETS="" INSTALL_PATH=/tmp/kselftests
The ima_setup.sh is missed in target folder, which makes test_ima failed.
Fix it by adding ima_setup.sh to TEST_PROGS_EXTENDED.
Fixes: 34b82d3ac1 ("bpf: Add a selftest for bpf_ima_inode_hash")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220516040020.653291-1-liuhangbin@gmail.com
We're currently using the x86_64 qemu for i386 builds. While this is not
incorrect, it's probably more sensible to use the i386 one, which will
at least fail properly if we accidentally were to build a 64-bit kernel.
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
hw_stats_l3.sh test is failing often for l3 stats shows less than 20
packets after 2 seconds sleep.
This is happening since there is a race between the 2 seconds sleep and
the netdevsim actually delivering the packets.
Increase the sleep time so the packets will be delivered successfully on
time.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add config options which are needed for LKDTM sub-tests:
STACKLEAK_ERASING test needs GCC_PLUGIN_STACKLEAK config.
READ_AFTER_FREE and READ_BUDDY_AFTER_FREE tests need
INIT_ON_FREE_DEFAULT_ON config.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220517132932.1484719-1-usama.anjum@collabora.com
bpf selftests can no longer be built with CFLAGS=-static with
liburandom_read.so and its dependent target.
Filter out -static for liburandom_read.so and its dependent target.
When building statically, this leaves urandom_read relying on
system-wide shared libraries.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220514002115.1376033-1-yosryahmed@google.com
Up till now, dax_direct_access() is used implicitly for normal
access, but for the purpose of recovery write, dax range with
poison is requested. To make the interface clear, introduce
enum dax_access_mode {
DAX_ACCESS,
DAX_RECOVERY_WRITE,
}
where DAX_ACCESS is used for normal dax access, and
DAX_RECOVERY_WRITE is used for dax recovery write.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/165247982851.52965.11024212198889762949.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Old tc versions (iproute2 5.3) show actions in multiple lines, not a
single line. Then the following unexpected MP_FAIL selftest output
occurs:
file received by server has inverted byte at 169
./mptcp_join.sh: line 1277: [: [{"total acts":1},{"actions":[{"order":0 pedit ,"control_action":{"type":"pipe"}keys 1
index 1 ref 1 bind 1,"installed":0,"last_used":0
key #0 at 148: val ff000000 mask ffffffff
5: integer expression expected
001 Infinite map syn[ ok ] - synack[ ok ] - ack[ ok ]
sum[ ok ] - csum [ ok ]
ftx[ ok ] - failrx[ ok ]
rtx[ ok ] - rstrx [ ok ]
itx[ ok ] - infirx[ ok ]
ftx[ ok ] - failrx[ ok ] invert
This patch adds a 'grep' before 'sed' to fix this.
Fixes: b6e074e171 ("selftests: mptcp: add infinite map testcase")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve the readability of error message which says module not found.
The new behaviour is consistent with the modprobe command.
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The config for the serial console for riscv,
CONFIG_SERIAL_EARLYCON_RISCV_SBI, added a dependency,
CONFIG_RISCV_SBI_V01, at some point, so add that in to the base arch
config.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It's often desirable (particularly in test automation) to run as many
tests as possible. This config enables all the tests which work as
builtins under UML at present, increasing the total tests run from 156
to 342 (not counting 36 'skipped' tests).
They can be run with:
./tools/testing/kunit/kunit.py run
--kunitconfig=./tools/testing/kunit/configs/all_tests_uml.config
This acts as an in-between point between the KUNIT_ALL_TESTS config
(which enables only tests whose dependencies are already enabled), and
the kunit_tool --alltests option, which tries to use allyesconfig,
taking a very long time to build and breaking very often.
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This primarily comes from running pylint over kunit tool code and
ignoring some warnings we don't care about.
If we ever got a fully clean setup, we could add this to run_checks.py,
but we're not there yet.
Fix things like
* Drop unused imports
* check `is None`, not `== None` (see PEP 8)
* remove redundant parens around returns
* remove redundant `else` / convert `elif` to `if` where appropriate
* rename make_arch_qemuconfig() param to base_kunitconfig (this is the
name used in the subclass, and it's a better one)
* kunit_tool_test: check the exit code for SystemExit (could be 0)
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There should be no behavioral changes from this patch.
This patch removes redundant comment text, inlines a function used in
only one place, and other such minor tweaks.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Consider this invocation
$ ./tools/testing/kunit/kunit.py parse <<EOF
TAP version 14
1..2
ok 1 - suite
# Subtest: no_tests_suite
# catastrophic error!
not ok 1 - no_tests_suite
EOF
It will have a 0 exit code even though there's a "not ok".
Consider this one:
$ ./tools/testing/kunit/kunit.py parse <<EOF
TAP version 14
1..2
ok 1 - suite
not ok 1 - no_tests_suite
EOF
It will a non-zero exit code.
Why?
We have this line in the kunit_parser.py
> parent_test = parse_test_header(lines, test)
where we have special handling when we see "# Subtest" and we ignore the
explicit reported "not ok 1" status!
Also, NO_TESTS at a suite-level only results in a non-zero status code
where then there's only one suite atm.
This change is the minimal one to make sure we don't overwrite it.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This logic depends on the kernel logging a message containing
'kunit test case crashed', but there is no corresponding logic to do so.
This is likely a relic of the revision process KUnit initially went
through when being upstreamed.
Delete it given
1) it's been missing for years and likely won't get implemented
2) the parser has been moving to be a more general KTAP parser,
kunit-only magic like this isn't how we'd want to implement it.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In case a distribution enables branch protection by default do as we do for
the main kernel and explicitly disable branch protection when building the
test case for having BTI disabled to ensure it doesn't get turned on by the
toolchain defaults.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220516182213.727589-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The "bti" selftests are built with -nostdlib, which apparently
automatically creates a statically linked binary, which is what we want
and need for BTI (to avoid interactions with the dynamic linker).
However this is not true when building a PIE binary, which some
toolchains (Ubuntu) configure as the default.
When compiling btitest with such a toolchain, it will create a
dynamically linked binary, which will probably fail some tests, as the
dynamic linker might not support BTI:
===================
TAP version 13
1..18
not ok 1 nohint_func/call_using_br_x0
not ok 2 nohint_func/call_using_br_x16
not ok 3 nohint_func/call_using_blr
....
===================
To make sure we create static binaries, add an explicit -static on the
linker command line. This forces static linking even if the toolchain
defaults to PIE builds, and fixes btitest runs on BTI enabled machines.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Fixes: 314bcbf09f ("kselftest: arm64: Add BTI tests")
Link: https://lore.kernel.org/r/20220511172129.2078337-1-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* kvm-arm64/psci-suspend:
: .
: Add support for PSCI SYSTEM_SUSPEND and allow userspace to
: filter the wake-up events.
:
: Patches courtesy of Oliver.
: .
Documentation: KVM: Fix title level for PSCI_SUSPEND
selftests: KVM: Test SYSTEM_SUSPEND PSCI call
selftests: KVM: Refactor psci_test to make it amenable to new tests
selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
KVM: arm64: Implement PSCI SYSTEM_SUSPEND
KVM: arm64: Add support for userspace to suspend a vCPU
KVM: arm64: Return a value from check_vcpu_requests()
KVM: arm64: Rename the KVM_REQ_SLEEP handler
KVM: arm64: Track vCPU power state using MP state values
KVM: arm64: Dedupe vCPU power off helpers
KVM: arm64: Don't depend on fallthrough to hide SYSTEM_RESET2
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/hcall-selection:
: .
: Introduce a new set of virtual sysregs for userspace to
: select the hypercalls it wants to see exposed to the guest.
:
: Patches courtesy of Raghavendra and Oliver.
: .
KVM: arm64: Fix hypercall bitmap writeback when vcpus have already run
KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace
Documentation: Fix index.rst after psci.rst renaming
selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-list
selftests: KVM: aarch64: Introduce hypercall ABI test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
tools: Import ARM SMCCC definitions
Docs: KVM: Add doc for the bitmap firmware registers
Docs: KVM: Rename psci.rst to hypercalls.rst
KVM: arm64: Add vendor hypervisor firmware register
KVM: arm64: Add standard hypervisor firmware register
KVM: arm64: Setup a framework for hypercall bitmap firmware registers
KVM: arm64: Factor out firmware register handling from psci.c
Signed-off-by: Marc Zyngier <maz@kernel.org>
In the MTE tests there are several places where we use chains of if
statements to open code what could be written as switch statements, move
over to switch statements to make the idiom clearer.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220510164520.768783-6-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Void pointers may be freely used with other pointer types in C, any casts
between void * and other pointer types serve no purpose other than to
mask potential warnings. Drop such casts from check_tags_inclusion to
help with future review of the code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The MTE check_tags_inclusion test uses the mte_switch_mode() helper but
ignores the return values it generates meaning we might not be testing
the things we're trying to test, fail the test if it reports an error.
The helper will log any errors it returns.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
mte_switch_mode() currently rejects attempts to set a zero tag however
there are tests such as check_tags_inclusion which attempt to cover cases
with zero tags using mte_switch_mode(). Since it is not clear why we are
rejecting zero tags change the test to accept them.
The issue has not previously been as apparent as it should be since the
return value of mte_switch_mode() was not always checked in the callers
and the tests weren't otherwise failing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When we detect a problem in verify_mte_pointer_validity() while checking
tags we don't log what the problem was which makes debugging harder. Add
some diagnostics.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add and delete a bunch of endpoints and verify the
respect of configured limits.
This covers the codepath introduced by the previous patch.
Fixes: 69c6ce7b6e ("selftests: mptcp: add implicit endpoint test case")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
usdt_400 test case relies on compiler using the same arg spec for
usdt_400 USDT. This assumption breaks with Clang (Clang generates
different arg specs with varying offsets relative to %rbp), so simplify
this further and hard-code the constant which will guarantee that arg
spec is the same across all 400 inlinings.
Fixes: 630301b0d5 ("selftests/bpf: Add basic USDT selftests")
Reported-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220513173703.89271-1-andrii@kernel.org
Commit 54de76c012 ("kselftest/cgroup: fix test_stress.sh to use OUTPUT
dir") changes the test_core command path from . to $OUTPUT. However,
variable OUTPUT may not be defined if the command is run interactively.
Fix that by using ${OUTPUT:-.} to cover both cases.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYnvwxgAKCRDdBJ7gKXxA
jhymAQDvHnFT3F5ydvBqApbzrQRUk/+fkkQSrF/xYawknZNgkAEA6Tnh9XqYplJN
bbmml6HTVvDjprEOCGakY/Kyz7qmdQ0=
=SMJQ
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Seven MM fixes, three of which address issues added in the most recent
merge window, four of which are cc:stable.
Three non-MM fixes, none very serious"
[ And yes, that's a real pull request from Andrew, not me creating a
branch from emailed patches. Woo-hoo! ]
* tag 'mm-hotfixes-stable-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add a mailing list for DAMON development
selftests: vm: Makefile: rename TARGETS to VMTARGETS
mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool
mailmap: add entry for martyna.szapar-mudlaw@intel.com
arm[64]/memremap: don't abuse pfn_valid() to ensure presence of linear map
procfs: prevent unprivileged processes accessing fdinfo dir
mm: mremap: fix sign for EFAULT error return value
mm/hwpoison: use pr_err() instead of dump_page() in get_any_page()
mm/huge_memory: do not overkill when splitting huge_zero_page
Revert "mm/memory-failure.c: skip huge_zero_page in memory_failure()"
alloc_pagecache_max_30M() in the cgroup memcg tests performs a 50MB
pagecache allocation, which it expects to be capped at 30MB due to the
calling process having a memory.high setting of 30MB. After the
allocation, the function contains a check that verifies that MB(29) <
memory.current <= MB(30). This check can actually fail
non-deterministically.
The testcases that use this function are test_memcg_high() and
test_memcg_max(), which set memory.min and memory.max to 30MB respectively
for the cgroup under test. The allocation can slightly exceed this number
in both cases, and for memory.max, the process performing the allocation
will not have the OOM killer invoked as it's performing a pagecache
allocation. This patchset therefore updates the above check to instead
use the verify_close() helper function.
Link: https://lkml.kernel.org/r/20220423155619.3669555-6-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
test_memcg_sock() in the cgroup memcg tests, verifies expected memory
accounting for sockets. The test forks a process which functions as a TCP
server, and sends large buffers back and forth between itself (as the TCP
client) and the forked TCP server. While doing so, it verifies that
memory.current and memory.stat.sock look correct.
There is currently a check in tcp_client() which asserts memory.current >=
memory.stat.sock. This check is racy, as between memory.current and
memory.stat.sock being queried, a packet could come in which causes
mem_cgroup_charge_skmem() to be invoked. This could cause
memory.stat.sock to exceed memory.current. Reversing the order of
querying doesn't address the problem either, as memory may be reclaimed
between the two calls. Instead, this patch just removes that assertion
altogether, and instead relies on the values_close() check that follows to
validate the expected accounting.
Link: https://lkml.kernel.org/r/20220423155619.3669555-5-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test_memcg_oom_group_leaf_events() testcase in the cgroup memcg tests
validates that processes in a group that perform allocations exceeding
memory.oom.group are killed. It also validates that the
memory.events.oom_kill events are properly propagated in this case.
Commit 06e11c907ea4 ("kselftests: memcg: update the oom group leaf events
test") fixed test_memcg_oom_group_leaf_events() to account for the fact
that the memory.events.oom_kill events in a child cgroup is propagated up
to its parent. This behavior can actually be configured by the
memory_localevents mount option, so this patch updates the testcase to
properly account for the possible presence of this mount option.
Link: https://lkml.kernel.org/r/20220423155619.3669555-4-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test_memcg_low() testcase in test_memcontrol.c verifies the expected
behavior of groups using the memory.low knob. Part of the testcase
verifies that a group with memory.low that experiences reclaim due to
memory pressure elsewhere in the system, observes memory.events.low events
as a result of that reclaim.
In commit 8a931f8013 ("mm: memcontrol: recursive memory.low
protection"), the memory controller was updated to propagate memory.low
and memory.min protection from a parent group to its children via a
configurable memory_recursiveprot mount option. This unfortunately broke
the memcg tests, which asserts that a sibling that experienced reclaim but
had a memory.low value of 0, would not observe any memory.low events.
This patch updates test_memcg_low() to account for the new behavior
introduced by memory_recursiveprot.
So as to make the test resilient to multiple configurations, the patch
also adds a new proc_mount_contains() helper that checks for a string in
/proc/mounts, and is used to toggle behavior based on whether the default
memory_recursiveprot was present.
Link: https://lkml.kernel.org/r/20220423155619.3669555-3-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix bugs in memcontroller cgroup tests", v2.
tools/testing/selftests/cgroup/test_memcontrol.c contains a set of
testcases which validate expected behavior of the cgroup memory
controller. Roman Gushchin recently sent out a patchset that fixed a few
issues in the test. This patchset continues that effort by fixing a few
more issues that were causing non-deterministic failures in the suite.
With this patchset, I'm unable to reproduce any more errors after running
the tests in a continuous loop for many iterations. Before, I was able to
reproduce at least one of the errors fixed in this patchset with just one
or two runs.
This patch (of 5):
In test_memcg_min() and test_memcg_low(), there is an array of four
sibling cgroups. All but one of these sibling groups does a 50MB
allocation, and the group that does no allocation is the third of four in
the array. This is not a problem per se, but makes it a bit tricky to do
some assertions in test_memcg_low(), as we want to make assertions on the
siblings based on whether or not they performed allocations. Having a
static index before which all groups have performed an allocation makes
this cleaner.
This patch therefore reorders the sibling groups so that the group that
performs no allocations is the last in the array. A follow-on patch will
leverage this to fix a bug in the test that incorrectly asserts that a
sibling group that had performed an allocation, but only had protection
from its parent, will not observe any memory.events.low events during
reclaim.
Link: https://lkml.kernel.org/r/20220423155619.3669555-1-void@manifault.com
Link: https://lkml.kernel.org/r/20220423155619.3669555-2-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Address the following coccicheck warning:
tools/testing/selftests/vm/userfaultfd.c:1536:21-22: WARNING opportunity
for swap().
tools/testing/selftests/vm/userfaultfd.c:1540:33-34: WARNING opportunity
for swap().
by using swap() for the swapping of variable values and drop
`tmp_area` that is not needed any more.
`swap()` macro in userfaultfd.c is introduced in commit 681696862b
("selftests: vm: remove dependecy from internal kernel macros")
It has been tested with gcc (Debian 8.3.0-6) 8.3.0.
Link: https://lkml.kernel.org/r/20220407123141.4998-1-guozhengkui@vivo.com
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After we added support for shmem and hugetlbfs, we can turn uffd-wp test
on always now.
Link: https://lkml.kernel.org/r/20220405014932.15212-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a regression test that validates that mremap fails for vma's that
don't exist.
Link: https://lkml.kernel.org/r/20220427224439.23828-3-dossche.niels@gmail.com
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit adds a selftest test case for ensuring the existence and the
permission (read-only) of the 'avail_oprations' DAMON sysfs file.
Link: https://lkml.kernel.org/r/20220426203843.45238-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert a bunch of selftests to using newly added high-level BPF map
APIs.
This change exposed that map_kptr selftests allocated too big buffer,
which is fixed in this patch as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220512220713.2617964-2-andrii@kernel.org
Check that ld_imm64 with src_reg=1 (aka BPF_PSEUDO_FUNC) works
with jit_blinding.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220513011025.13344-2-alexei.starovoitov@gmail.com
Rarely some of the test cases fail. Make the test more robust by increasing
the timeout of ping commands to 5 seconds.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement a crypto library interface for the s390-native ChaCha20 cipher
algorithm. This allows us to stop to select CRYPTO_CHACHA20 and instead
select CRYPTO_ARCH_HAVE_LIB_CHACHA. This allows BIG_KEYS=y not to build
a whole ChaCha20 crypto infrastructure as a built-in, but build a smaller
CRYPTO_LIB_CHACHA instead.
Make CRYPTO_CHACHA_S390 config entry to look like similar ones on other
architectures. Remove CRYPTO_ALGAPI select as anyway it is selected by
CRYPTO_SKCIPHER.
Add a new test module and a test script for ChaCha20 cipher and its
interfaces. Here are test results on an idle z15 machine:
Data | Generic crypto TFM | s390 crypto TFM | s390 lib
size | enc dec | enc dec | enc dec
-----+--------------------+------------------+----------------
512b | 1545ns 1295ns | 604ns 446ns | 430ns 407ns
4k | 9536ns 9463ns | 2329ns 2174ns | 2170ns 2154ns
64k | 149.6us 149.3us | 34.4us 34.5us | 33.9us 33.1us
6M | 23.61ms 23.11ms | 4223us 4160us | 3951us 4008us
60M | 143.9ms 143.9ms | 33.5ms 33.2ms | 32.2ms 32.1ms
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a test that has 300 VIPs listening on port 443.
Each VIP:443 will have 80 listening socks by using SO_REUSEPORT.
Thus, it will have 24000 listening socks.
Before removing the port only listening_hash, all socks will be in the
same port 443 bucket and inet_reuseport_add_sock() spends much time to
walk through the bucket. After removing the port only listening_hash
and move all usage to the port+addr lhash2, each bucket in the
ideal case has 80 sk which is much smaller than before.
Here is the test result from a qemu:
Before: listen 24000 socks took 210.210485362 (~210s)
After: listen 24000 socks took 0.207173 (~210ms)
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before:
$ ./tools/testing/kunit/kunit.py parse /dev/null
...
[ERROR] Test : invalid KTAP input!
After:
$ ./tools/testing/kunit/kunit.py parse /dev/null
...
[ERROR] Test <missing>: could not find any KTAP output!
This error message gets printed out when extract_tap_output() yielded no
lines. So while it could be because of malformed KTAP output from KUnit,
it could also be due to not having any KTAP output at all.
Try and make the error message here more clear.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Note: this potentially breaks custom qemu_configs if people are using
them! But the fix for them is simple, don't specify multiple arguments
in one string and don't add on a redundant ''.
It feels a bit iffy to be using a shell in the first place.
There's the usual shenanigans where people could pass in arbitrary shell
commands via --kernel_arg (since we're just adding '' around the
kernel_cmdline) or via a custom qemu_config.
This isn't too much of a concern given the nature of this script (and
the qemu_config file is in python, you can do w/e you want already).
But it does have some other drawbacks.
One example of a kunit-specific pain point:
If the relevant qemu binary is missing, we get output like this:
> /bin/sh: line 1: qemu-system-aarch64: command not found
This in turn results in our KTAP parser complaining about
missing/invalid KTAP, but we don't directly show the error!
It's even more annoying to debug when you consider --raw_output only
shows KUnit output by default, i.e. you need --raw_output=all to see it.
Whereas directly invoking the binary, Python will raise a
FileNotFoundError for us, which is a noisier but more clear.
Making this change requires
* splitting parameters like ['-m 256'] into ['-m', '256'] in
kunit/qemu_configs/*.py
* change [''] to [] in kunit/qemu_configs/*.py since otherwise
QEMU fails w/ 'Device needs media, but drive is empty'
* dropping explicit quoting of the kernel cmdline
* using shlex.quote() when we print what command we're running
so the user can copy-paste and run it
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Before:
> Testing complete. Passed: 137, Failed: 0, Crashed: 0, Skipped: 36, Errors: 0
After:
> Testing complete. Ran 173 tests: passed: 137, skipped: 36
Even with our current set of statuses, the output is a bit verbose.
It could get worse in the future if we add more (e.g. timeout, kasan).
Let's only print the relevant ones.
I had previously been sympathetic to the argument that always
printing out all the statuses would make it easier to parse results.
But now we have commit acd8e8407b ("kunit: Print test statistics on
failure"), there are test counts printed out in the raw output.
We don't currently print out an overall total across all suites, but it
would be easy to add, if we see a need for that.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Running cgroup kselftest with O= fails to run the with_stress test due
to hardcoded ./test_core. Find test_core binary using the OUTPUT directory.
Fixes: 1a99fcc035 ("selftests: cgroup: Run test_core under interfering stress")
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
It may lead to kernel panic when execute the following testcase on mips:
# cd tools/testing/selftests/ftrace
# ./ftracetest test.d/kprobe/multiple_kprobes.tc
A preliminary analysis shows that the issue is related with
echo 1 > events/kprobes/enable
after add the 256 probe points.
In order to find the root cause, I want to verify which probe point has
problem, so it is necessary to save kprobe_events to test log.
With this patch, we can get the 256 probe points in the test log through
the following command:
# ./ftracetest test.d/kprobe/multiple_kprobes.tc -vvv -k
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
To more clearly distinguish between the various heap types, rename the
slab tests to "slab".
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
fexit_stress is attaching maximum allowed amount of fexit programs to
bpf_fentry_test1 kernel function, which is used by a bunch of other
parallel tests, thus pretty frequently interfering with their execution.
Given the test assumes nothing else is attaching to bpf_fentry_test1,
mark it serial.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220511232012.609370-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Check at runtime how various operations for kptr_ref affect its refcount
and verify against the actual count.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220511194654.765705-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This uses the newly added SEC("?foo") naming to disable autoload of
programs, and then loads them one by one for the object and verifies
that loading fails and matches the returned error string from verifier.
This is similar to already existing verifier tests but provides coverage
for BPF C.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220511194654.765705-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In an effort to actually test the refcounting logic at runtime, add a
refcount_t member to prog_test_ref_kfunc and use it in selftests to
verify and test the whole logic more exhaustively.
The kfunc calls for prog_test_member do not require runtime refcounting,
as they are only used for verifier selftests, not during runtime
execution. Hence, their implementation now has a WARN_ON_ONCE as it is
not meant to be reachable code at runtime. It is strictly used in tests
triggering failure cases in the verifier. bpf_kfunc_call_memb_release is
called from map free path, since prog_test_member is embedded in map
value for some verifier tests, so we skip WARN_ON_ONCE for it.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220511194654.765705-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The host interfaces $h1 and $h2 don't have to be switchdev interfaces,
but due to the fact that we pass $tcflags which may have the value of
"skip_sw", we force $h2 to offload a drop rule for dst_ip, something
which it may not be able to do.
The selftest only wants to verify the hit count of this rule as a means
of figuring out whether the packet was received, so remove the $tcflags
for it and let it be done in software.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220510220904.284552-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With latest clang, I got the following compilation errors:
.../prog_tests/test_tunnel.c:291:6: error: variable 'local_ip_map_fd' is used uninitialized
whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (attach_tc_prog(&tc_hook, -1, set_dst_prog_fd))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../bpf/prog_tests/test_tunnel.c:312:6: note: uninitialized use occurs here
if (local_ip_map_fd >= 0)
^~~~~~~~~~~~~~~
...
.../prog_tests/kprobe_multi_test.c:346:6: error: variable 'err' is used uninitialized
whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (IS_ERR(map))
^~~~~~~~~~~
.../prog_tests/kprobe_multi_test.c:388:6: note: uninitialized use occurs here
if (err) {
^~~
This patch fixed the above compilation errors.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20220511184735.3670214-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some of the BPF selftests are failing when running with a rather bare
bones configuration based on tools/testing/selftests/bpf/config.
Specifically, we see a bunch of failures due to errno 95:
> test_attach_api:PASS:fentry_raw_skel_load 0 nsec
> libbpf: prog 'test_kprobe_manual': failed to attach: Operation not supported
> test_attach_api:FAIL:bpf_program__attach_kprobe_multi_opts unexpected error: -95
> 79 /6 kprobe_multi_test/attach_api_syms:FAIL
The cause of these is that CONFIG_FPROBE is missing. With this change we
add this configuration value to the BPF selftests config.
Signed-off-by: Daniel Müller <deso@posteo.net>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20220511172249.4082510-1-deso@posteo.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert the stats tests from spinning on the getsockopt to just check
getsockopt once when the Rx thread has received all the packets. The
actual completion of receiving the last packet forms a natural point
in time when the receiver is ready to call the getsockopt to check the
stats. In the previous version , we just span on the getsockopt until
we received the right answer. This could be forever or just getting
the "correct" answer by shear luck.
The pacing_on variable can now be dropped since all test can now
handle pacing properly.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make the stats tests look and feel just like normal tests instead of
bunched under the umbrella of TEST_STATS. This means we will always
run each of them even if one fails. Also gets rid of some special case
code.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce validation functions that can be optionally called by the Rx
and Tx threads. These are then used to replace the Rx and Tx stats
dispatchers. This so that we in the next commit can make the stats
tests proper normal tests and not be some special case, as today.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove the veth pair when the tests are aborted by pressing
ctrl-c. Currently in this situation, the veth pair is left on the
system polluting the netdev space.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-7-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a timeout to the tests so that if all packets have not been
received within 3 seconds, fail the ongoing test. Hinders a test from
dead-locking if there is something wrong.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-6-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix the reporting of failed tests as it was broken in several
ways. First, a failed test was reported as both failed and passed
messing up the count. Second, tests were not aborted after a failure
and could generate more "failures" messing up the count even
more. Third, the failure reporting from the application to the shell
script was wrong. It always reported pass. And finally, the handling
of the failures in the launch script was not correct.
Correct all this by propagating the failure up through the function
calls to a calling function that can abort the test. A receiver or
sender thread will mark the new variable in the test spec called fail,
if a test has failed. This is then picked up by the main thread when
everyone else has exited and this is then marked and propagated up to
the calling script.
Also add a summary function in the calling script so that a user
does not have to go through the sub tests to see if something has
failed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Execute all xsk selftests for busy-poll mode too. Currently they were
only run for the standard interrupt driven softirq mode. Replace the
unused option queue-id with the new option busy-poll.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Do not try to send packets of zero length since they are dropped by
veth after commit 726e2c5929 ("veth: Ensure eth header is in skb's
linear part"). Replace these two packets with packets of length 60 so
that they are not dropped.
Also clean up the confusing naming. MIN_PKT_SIZE was really
MIN_ETH_PKT_SIZE and PKT_SIZE was both MIN_ETH_SIZE and the default
packet size called just PKT_SIZE. Make it consistent by using the
right define in the right place.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-3-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove the spec-file that is not used any longer from the shell
scripts. Also remove an unused option.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that reads all functions from ftrace available_filter_functions
file and attach them all through kprobe_multi API.
It also prints stats info with -v option, like on my setup:
test_bench_attach: found 48712 functions
test_bench_attach: attached in 1.069s
test_bench_attach: detached in 0.373s
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220510122616.2652285-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace usage of CHECK with a corresponding ASSERT_* macro for bpf_iter
tests. Only done if the final result is equivalent, no changes when
replacement means loosing some information, e.g. from formatting string.
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20220510155233.9815-4-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace bpf_trace_printk with bpf_printk in test_tunnel_kern.c.
function bpf_printk is more easier and useful than bpf_trace_printk.
Signed-off-by: Kaixi Fan <fankaixi.li@bytedance.com>
Link: https://lore.kernel.org/r/20220430074844.69214-4-fankaixi.li@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move vxlan tunnel testcases from test_tunnel.sh to test_progs.
And add vxlan tunnel source testcases also. Other tunnel testcases
will be moved to test_progs step by step in the future.
Rename bpf program section name as SEC("tc") because test_progs
bpf loader could not load sections with name SEC("gre_set_tunnel").
Because of this, add bpftool to load bpf programs in test_tunnel.sh.
Signed-off-by: Kaixi Fan <fankaixi.li@bytedance.com>
Link: https://lore.kernel.org/r/20220430074844.69214-3-fankaixi.li@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds up test cases that handles 4 combinations:
a) outer map: BPF_MAP_TYPE_ARRAY_OF_MAPS
inner maps: BPF_MAP_TYPE_ARRAY and BPF_MAP_TYPE_HASH
b) outer map: BPF_MAP_TYPE_HASH_OF_MAPS
inner maps: BPF_MAP_TYPE_ARRAY and BPF_MAP_TYPE_HASH
Signed-off-by: Takshak Chahande <ctakshak@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220510082221.2390540-2-ctakshak@fb.com
The gup_test binary will fail showing only the output of perror("open") in
the case that /sys/kernel/debug/gup_test is not found. This will almost
always be due to CONFIG_GUP_TEST not being set, which enables
compilation of a kernel that provides this file.
Add a short error message to clarify this failure and point the user to
the solution.
Link: https://lkml.kernel.org/r/20220502224942.995427-1-jsavitz@redhat.com
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The tools/testing/selftests/vm/Makefile uses the variable TARGETS
internally to generate a list of platform-specific binary build targets
suffixed with _{32,64}. When building the selftests using its own
Makefile directly, such as via the following command run in a kernel tree:
One receives an error such as the following:
make: Entering directory '/root/linux/tools/testing/selftests'
make --no-builtin-rules ARCH=x86 -C ../../.. headers_install
make[1]: Entering directory '/root/linux'
INSTALL ./usr/include
make[1]: Leaving directory '/root/linux'
make[1]: Entering directory '/root/linux/tools/testing/selftests/vm'
make[1]: *** No rule to make target 'vm.c', needed by '/root/linux/tools/testing/selftests/vm/vm_64'. Stop.
make[1]: Leaving directory '/root/linux/tools/testing/selftests/vm'
make: *** [Makefile:175: all] Error 2
make: Leaving directory '/root/linux/tools/testing/selftests'
The TARGETS variable passed to tools/testing/selftests/Makefile collides
with the TARGETS used in tools/testing/selftests/vm/Makefile, so rename
the latter to VMTARGETS, eliminating the collision with no functional
change.
Link: https://lkml.kernel.org/r/20220504213454.1282532-1-jsavitz@redhat.com
Fixes: f21fda8f64 ("selftests: vm: pkeys: fix multilib builds for x86")
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Acked-by: Nico Pache <npache@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add barrier() and barrier_var() macros into bpf_helpers.h to be used by
end users. While a bit advanced and specialized instruments, they are
sometimes indispensable. Instead of requiring each user to figure out
exact asm volatile incantations for themselves, provide them from
bpf_helpers.h.
Also remove conflicting definitions from selftests. Some tests rely on
barrier_var() definition being nothing, those will still work as libbpf
does the #ifndef/#endif guarding for barrier() and barrier_var(),
allowing users to redefine them, if necessary.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-8-andrii@kernel.org
Excercise both supported forms of bpf_core_field_exists() and
bpf_core_field_size() helpers: variable-based field reference and
type/field name-based one.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-5-andrii@kernel.org
Prevent "classic" and light skeleton generation rules from stomping on
each other's toes due to the use of the same <obj>.linked{1,2,3}.o
naming pattern. There is no coordination and synchronizataion between
.skel.h and .lskel.h rules, so they can easily overwrite each other's
intermediate object files, leading to errors like:
/bin/sh: line 1: 170928 Bus error (core dumped)
/data/users/andriin/linux/tools/testing/selftests/bpf/tools/sbin/bpftool gen skeleton
/data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.linked3.o
name test_ksyms_weak
> /data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h
make: *** [Makefile:507: /data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h] Error 135
make: *** Deleting file '/data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h'
Fix by using different suffix for light skeleton rule.
Fixes: c48e51c8b0 ("bpf: selftests: Add selftests for module kfunc support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-2-andrii@kernel.org
Add extended_error to the binderfs feature list, to help userspace
determine whether the BINDER_GET_EXTENDED_ERROR ioctl is supported by
the binder driver.
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220429235644.697372-4-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a comma after each array value to make clang-format keep the
current array formatting. See the following commit.
Automatically modified with:
sed -i 's/\t\({}\|NULL\)$/\0,/' tools/testing/selftests/landlock/fs_test.c
Link: https://lore.kernel.org/r/20220506160513.523257-5-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
In preparation to a following commit, add clang-format on and
clang-format off stanzas around constant definitions and the TEST_F_FORK
macro. This enables to keep aligned values, which is much more readable
than packed definitions.
Add other clang-format exceptions for FIXTURE() and
FIXTURE_VARIANT_ADD() declarations to force space before open brace,
which is reported by checkpatch.pl .
Link: https://lore.kernel.org/r/20220506160513.523257-4-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Remove completed item from TODO list.
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Update comments in memblock_free_*() functions to match the style used
in tests/alloc_*.c by rewording to make the expected outcome more apparent
and, if more than one memblock is involved, adding a visual of the
memory blocks.
If the comment has an extra column of spaces, remove the extra space at
the beginning of each line for consistency and to conform to Linux kernel
coding style.
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Update comments in memblock_remove_*() functions to match the style used
in tests/alloc_*.c by rewording to make the expected outcome more apparent
and, if more than one memblock is involved, adding a visual of the
memory blocks.
If the comment has an extra column of spaces, remove the extra space at
the beginning of each line for consistency and to conform to Linux kernel
coding style.
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Update comments in memblock_reserve_*() functions to match the style used
in tests/alloc_*.c by rewording to make the expected outcome more apparent
and, if more than one memblock is involved, adding a visual of the
memory blocks.
If the comment has an extra column of spaces, remove the extra space at
the beginning of each line for consistency and to conform to Linux kernel
coding style.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Update comments in memblock_add_*() functions to match the style used
in tests/alloc_*.c by rewording to make the expected outcome more apparent
and, if more than one memblock is involved, adding a visual of the
memory blocks.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
When NET_F_F_GRO_FRAGLIST is enabled and bpf_skb_change_proto is used,
check if udp packets and tcp packets are successfully delivered to user
space. If wrong udp packets are delivered, udpgso_bench_rx will exit
with "Initial byte out of range"
Signed-off-by: Maciej enczykowski <maze@google.com>
Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a selftest that uses an IPIP topology and tests that L3 HW stats
reflect the traffic in the tunnel.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function get_l3_stats() from the test hw_stats_l3.sh will be useful for
any test that wishes to work with L3 stats. Furthermore, it is easy to
generalize to other HW stats suites (for when such are added). Therefore,
move the code to lib.sh, rewrite it to have the same interface as the other
stats-collecting functions, and generalize to take the name of the HW stats
suite to collect as an argument.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'ping' utility is able to manage two kind of sockets (raw or icmp),
depending on the sysctl ping_group_range. By default, ping_group_range is
set to '1 0', which forces ping to use an ip raw socket.
Let's replay the ping tests by allowing 'ping' to use the ip icmp socket.
After the previous patch, ipv4 tests results are the same with both kinds
of socket. For ipv6, there are a lot a new failures (the previous patch
fixes only two cases).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireguard
Previous releases - regressions:
- igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
- mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()
- rds: acquire netns refcount on TCP sockets
- rxrpc: enable IPv6 checksums on transport socket
- nic: hinic: fix bug of wq out of bound access
- nic: thunder: don't use pci_irq_vector() in atomic context
- nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS flag
- nic: mlx5e:
- lag, fix use-after-free in fib event handler
- fix deadlock in sync reset flow
Previous releases - always broken:
- tcp: fix insufficient TCP source port randomness
- can: grcan: grcan_close(): fix deadlock
- nfc: reorder destructive operations in to avoid bugs
Misc:
- wireguard: improve selftests reliability
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=XuN7
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, rxrpc and wireguard.
Previous releases - regressions:
- igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
- mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()
- rds: acquire netns refcount on TCP sockets
- rxrpc: enable IPv6 checksums on transport socket
- nic: hinic: fix bug of wq out of bound access
- nic: thunder: don't use pci_irq_vector() in atomic context
- nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS
flag
- nic: mlx5e:
- lag, fix use-after-free in fib event handler
- fix deadlock in sync reset flow
Previous releases - always broken:
- tcp: fix insufficient TCP source port randomness
- can: grcan: grcan_close(): fix deadlock
- nfc: reorder destructive operations in to avoid bugs
Misc:
- wireguard: improve selftests reliability"
* tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
NFC: netlink: fix sleep in atomic bug when firmware download timeout
selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer
tcp: drop the hash_32() part from the index calculation
tcp: increase source port perturb table to 2^16
tcp: dynamically allocate the perturb table used by source ports
tcp: add small random increments to the source port
tcp: resalt the secret every 10 seconds
tcp: use different parts of the port_offset for index and offset
secure_seq: use the 64 bits of the siphash for port offset calculation
wireguard: selftests: set panic_on_warn=1 from cmdline
wireguard: selftests: bump package deps
wireguard: selftests: restore support for ccache
wireguard: selftests: use newer toolchains to fill out architectures
wireguard: selftests: limit parallelism to $(nproc) tests at once
wireguard: selftests: make routing loop test non-fatal
net/mlx5: Fix matching on inner TTC
net/mlx5: Avoid double clear or set of sync reset requested
net/mlx5: Fix deadlock in sync reset flow
net/mlx5e: Fix trust state reset in reload
net/mlx5e: Avoid checking offload capability in post_parse action
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJlxloeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGBoIH/3b1GGuTBq8XndVl
1EaCJe/3auE8cHklNpLyTWsQY7He9CcIe4b0fGmtkUlwqAE6E5fUPfqwzjjb3eux
MDPYYKbnjm/jA73dbTbr3lxMlc/caZpuRrwwuek0+vS0DLYhP917NmDvGX8q3l5U
84RCEHztrTmzOivS0BwNJV1XFpcqnODTDN4zNR43o9ZY9tVY4/OqL0+lcQIHM2Nh
6urEzWMMi+BRGaOqdgtt+NxmgKQNTRAkPan6FpJloRSxrOzl4LiYBKMfE2iyisND
91i1CGvOQjaQNIw9JYNvtSWGawMb+obTyCFHyj1Qm7LwD0VAZ+FQrvrdGz4rJrAY
Sq01XYs=
=Rl6l
-----END PGP SIGNATURE-----
Merge tag 'v5.18-rc4' into next
Merge master into next, to bring in commit 5f24d5a579 ("mm, hugetlb:
allow for "high" userspace addresses"), which is needed as a
prerequisite for the series converting powerpc to the generic mmap
logic.
As discussed here with Ido Schimmel:
https://patchwork.kernel.org/project/netdevbpf/patch/20220224102908.5255-2-jianbol@nvidia.com/
the default conform-exceed action is "reclassify", for a reason we don't
really understand.
The point is that hardware can't offload that police action, so not
specifying "conform-exceed" was always wrong, even though the command
used to work in hardware (but not in software) until the kernel started
adding validation for it.
Fix the command used by the selftest by making the policer drop on
exceed, and pass the packet to the next action (goto) on conform.
Fixes: 8cd6b020b6 ("selftests: ocelot: add some example VCAP IS1, IS2 and ES0 tc offloads")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220503121428.842906-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than setting this once init is running, set panic_on_warn from
the kernel command line, so that it catches splats from WireGuard
initialization code and the various crypto selftests.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use newer, more reliable package dependencies. These should hopefully
reduce flakes. However, we keep the old iputils package, as it
accumulated bugs after resulting in flakes on slow machines.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When moving to non-system toolchains, we inadvertantly killed the
ability to use ccache. So instead, build ccache support into the test
harness directly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than relying on the system to have cross toolchains available,
simply download musl.cc's ones and use that libc.so, and then we use it
to fill in a few missing platforms, such as riscv64, riscv64, powerpc64,
and s390x.
Since riscv doesn't have a second serial port in its device description,
we have to use virtio's vport. This is actually the same situation on
ARM, but we were previously hacking QEMU up to work around this, which
required a custom QEMU. Instead just do the vport trick on ARM too.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The parallel tests were added to catch queueing issues from multiple
cores. But what happens in reality when testing tons of processes is
that these separate threads wind up fighting with the scheduler, and we
wind up with contention in places we don't care about that decrease the
chances of hitting a bug. So just do a test with the number of CPU
cores, rather than trying to scale up arbitrarily.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is customary for selftests to have a comment with a topology diagram,
which serves to illustrate the situation in which the test is done. This
selftest lacks it. Add it.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is customary for selftests to have a comment with a topology diagram,
which serves to illustrate the situation in which the test is done. This
selftest lacks it. Add it.
While at it, fix the list of tests so that the test names are enumerated
one at a line.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A number of mlxsw-specific QoS tests use manual QoS DCB management. As
such, they need to make sure lldpad is not running, because it would
override the configuration the test has applied using other tools. To that
end, these selftests invoke the bail_on_lldpad() helper, which terminates
the selftest if th lldpad is running.
Some of these tests however first install the bash exit trap, which invokes
a cleanup() at the test exit. If bail_on_lldpad() has terminated the script
even before the setup part was run, the cleanup part will be very confused.
Therefore make sure bail_on_lldpad() is invoked before the cleanup is
registered.
While there are still edge cases where the user terminates the script
before the setup was fully done, this takes care of a common situation
where the cleanup would be invoked in an inconsistent state.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds a selftest script that performs a comprehensive
behavioral/functional test of all userspace PM capabilities by exercising
all the newly added APIs and changes to support said capabilities.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with a
"listen" option to bind a MPTCP listening socket to the
provided addr+port. This option is exercised in testing
subflow initiation scenarios in conjunction with userspace
path managers where the MPTCP application does not hold an
active listener to accept requests for new subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds to self-testing support for the MPTCP netlink interface
by capturing various MPTCP netlink events (and all their metadata)
associated with connections, subflows and address announcements.
It is used in self-testing scripts that exercise MPTCP netlink commands
to precisely validate those operations by examining the dispatched
MPTCP netlink events in response to those commands.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with a "dsf"
(destroy subflow) option to support the newly added netlink interface
command MPTCP_PM_CMD_SUBFLOW_DESTROY over the chosen MPTCP connection.
E.g. ./pm_nl_ctl dsf lip 10.0.2.1 lport 44567 rip 10.0.2.2 rport 56789
token 823274047
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with a "csf"
(create subflow) option to support the newly added netlink interface
command MPTCP_PM_CMD_SUBFLOW_CREATE over the chosen MPTCP connection.
E.g. ./pm_nl_ctl csf lip 10.0.2.1 lid 23 rip 10.0.2.2 rport 56789
token 823274047
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with a "rem"
(remove) option to support the newly added netlink interface command
MPTCP_PM_CMD_REMOVE to issue a REMOVE_ADDR signal over the
chosen MPTCP connection.
E.g. ./pm_nl_ctl rem token 823274047 id 23
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with an "ann"
(announce) option to support the newly added netlink interface command
MPTCP_PM_CMD_ANNOUNCE to issue ADD_ADDR advertisements over the
chosen MPTCP connection.
E.g. ./pm_nl_ctl ann 192.168.122.75 token 823274047 id 25 dev enp1s0
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the arm64 kselftests attempt to locate the ABI headers using
custom logic which doesn't work correctly in the case of out of tree builds
if KBUILD_OUTPUT is not specified. Since lib.mk defines KHDR_INCLUDES with
the appropriate flags we can simply remove the custom logic and use that
instead.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220503231655.211346-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Assert that the vCPU exits to userspace with KVM_SYSTEM_EVENT_SUSPEND if
the guest calls PSCI SYSTEM_SUSPEND. Additionally, guarantee that the
SMC32 and SMC64 flavors of this call are discoverable with the
PSCI_FEATURES call.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-13-oupton@google.com
Split up the current test into several helpers that will be useful to
subsequent test cases added to the PSCI test suite.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-12-oupton@google.com
Setting a vCPU's MP state to KVM_MP_STATE_STOPPED has the effect of
powering off the vCPU. Rather than using the vCPU init feature flag, use
the KVM_SET_MP_STATE ioctl to power off the target vCPU.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-11-oupton@google.com
The PSCI and PV stolen time tests both need to make SMCCC calls within
the guest. Create a helper for making SMCCC calls and rework the
existing tests to use the library function.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-10-oupton@google.com
There are other interactions with PSCI worth testing; rename the PSCI
test to make it more generic.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-9-oupton@google.com
Test basic (port-default, VLAN PCP and IP DSCP) QoS classification for
Ocelot switches. Advanced QoS classification using tc filters is covered
by tc_flower_chains.sh in the same directory.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220502155424.4098917-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check userspace PM behavior to ensure ADD_ADDR echoes are only sent when
there is an active userspace daemon. If the daemon is restarting or
hasn't loaded yet, the missing echo will cause the peer to retransmit
the ADD_ADDR - and hopefully the daemon will be ready to receive it at
that later time.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This verifies that if a filter is set up with the wait killable feature
that it obeys the semantics that non-fatal signals are ignored during
a notification after the notification is received.
Cases tested:
* Non-fatal signal prior to receive
* Non-fatal signal during receive
* Fatal signal after receive
The normal signal handling is tested in user_notification_signal. That
behaviour remains unchanged.
On an unsupported kernel, these tests will immediately bail as it relies
on a new seccomp flag.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503080958.20220-4-sargun@sargun.me
This splits up the get_proc_stat function to make it so we can use it as a
generic helper to read the nth field from multiple different files, versus
replicating the logic in multiple places.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503080958.20220-3-sargun@sargun.me
Add the psuedo-firmware registers KVM_REG_ARM_STD_BMAP,
KVM_REG_ARM_STD_HYP_BMAP, and KVM_REG_ARM_VENDOR_HYP_BMAP to
the base_regs[] list.
Also, add the COPROC support for KVM_REG_ARM_FW_FEAT_BMAP.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220502233853.1233742-10-rananta@google.com
Introduce a KVM selftest to check the hypercall interface
for arm64 platforms. The test validates the user-space'
[GET|SET]_ONE_REG interface to read/write the psuedo-firmware
registers as well as its effects on the guest upon certain
configurations.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220502233853.1233742-9-rananta@google.com
The PSCI and PV stolen time tests both need to make SMCCC calls within
the guest. Create a helper for making SMCCC calls and rework the
existing tests to use the library function.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220409184549.1681189-11-oupton@google.com
There are other interactions with PSCI worth testing; rename the PSCI
test to make it more generic.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220409184549.1681189-10-oupton@google.com
The program uses CLOCK_TAI as default clock since it was added to the
Linux repo. In commit:
| 040806343b ("selftests/net: so_txtime multi-host support")
a help text stating the wrong default clock was added.
This patch fixes the help text.
Fixes: 040806343b ("selftests/net: so_txtime multi-host support")
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220502094638.1921702-3-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch fixes the parsing of the cmd line supplied start time on 32
bit systems. A "long" on 32 bit systems is only 32 bit wide and cannot
hold a timestamp in nano second resolution.
Fixes: 040806343b ("selftests/net: so_txtime multi-host support")
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220502094638.1921702-2-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test that sends 1Gbps of traffic through the switch, into which it
then injects a burst of traffic and tests that there are no drops.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add two helpers, start_traffic_pktsize() and start_tcp_traffic_pktsize(),
that allow explicit overriding of packet size. Change start_traffic() and
start_tcp_traffic() to dispatch through these helpers with the default
packet size.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In emulated environments, the bridge ports enslaved to br1 get a carrier
before changing br1's PVID. This means that by the time the PVID is
changed, br1 is already operational and configured with an IPv6
link-local address.
When the test is run with netdevs registered by mlxsw, changing the PVID
is vetoed, as changing the VID associated with an existing L3 interface
is forbidden. This restriction is similar to the 8021q driver's
restriction of changing the VID of an existing interface.
Fix this by taking br1 down and bringing it back up when it is fully
configured.
With this fix, the test reliably passes on top of both the SW and HW
data paths (emulated or not).
Fixes: 239e754af8 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220502084507.364774-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Felix VSC9959 switch in NXP LS1028A supports the tc-gate action
which enforced time-based access control per stream. A stream as seen by
this switch is identified by {MAC DA, VID}.
We use the standard forwarding selftest topology with 2 host interfaces
and 2 switch interfaces. The host ports must require timestamping non-IP
packets and supporting tc-etf offload, for isochron to work. The
isochron program monitors network sync status (ptp4l, phc2sys) and
deterministically transmits packets to the switch such that the tc-gate
action either (a) always accepts them based on its schedule, or
(b) always drops them.
I tried to keep as much of the logic that isn't specific to the NXP
LS1028A in a new tsn_lib.sh, for future reuse. This covers
synchronization using ptp4l and phc2sys, and isochron.
The cycle-time chosen for this selftest isn't particularly impressive
(and the focus is the functionality of the switch), but I didn't really
know what to do better, considering that it will mostly be run during
debugging sessions, various kernel bloatware would be enabled, like
lockdep, KASAN, etc, and we certainly can't run any races with those on.
I tried to look through the kselftest framework for other real time
applications and didn't really find any, so I'm not sure how better to
prepare the environment in case we want to go for a lower cycle time.
At the moment, the only thing the selftest is ensuring is that dynamic
frequency scaling is disabled on the CPU that isochron runs on. It would
probably be useful to have a blacklist of kernel config options (checked
through zcat /proc/config.gz) and some cyclictest scripts to run
beforehand, but I saw none of those.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20220501112953.3298973-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Merge 5.18-rc5 into char-misc-next
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a boilerplate test loop to run all tests in
vrf_strict_mode_test.sh. Add a -t flag that allows a selected test to
run. Remove the vrf_strict_mode_tests function which is now unused.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220429164658.GA656707@jaehee-ThinkPad-X1-Extreme
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When generating the selftests to another folder, the fixed tests are
missing as they are not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net/forwarding" INSTALL_PATH=/tmp/kselftests
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When generating the selftests to another folder, the fixed tests are
missing as they are not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net" INSTALL_PATH=/tmp/kselftests
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tests ensure that the in-kernel path manager is bypassed when
the userspace path manager is configured. Kernel code is still
responsible for ADD_ADDR echo, so also make sure that's working.
Tested-by: Geliang Tang <geliang.tang@suse.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new test for memory.reclaim that verifies that the interface
correctly reclaims memory as intended, from both anon and file pages.
Link: https://lkml.kernel.org/r/20220425190040.2475377-5-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Chen Wandun <chenwandun@huawei.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, alloc_anon_noexit() calls alloc_anon() which instantly frees
the allocated memory. alloc_anon_noexit() is usually used with
cg_run_nowait() to run a process in the background that allocates
memory. It makes sense for the background process to keep the memory
allocated and not instantly free it (otherwise there is no point of
running it in the background).
Link: https://lkml.kernel.org/r/20220425190040.2475377-4-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Chen Wandun <chenwandun@huawei.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When multiple notifications are waiting, ensure they show up in order, as
defined by the (predictable) seccomp notification ID. This ensures FIFO
ordering of notification delivery as notification ids are monitonic and
decided when the notification is generated (as opposed to received).
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: linux-kselftest@vger.kernel.org
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220428015447.13661-2-sargun@sargun.me
Running the seccomp tests under the kernel with "defconfig"
shouldn't fail. Because the CONFIG_USER_NS is not supported
in "defconfig". Skipping this case instead of failing it is
better.
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/7f7687696a5c0a2d040a24474616e945c7cf2bb5.1648599460.git.yang.guang5@zte.com.cn
Add a test to check that PTRACE_O_SUSPEND_SECCOMP can't be set without
CAP_SYS_ADMIN through PTRACE_SEIZE or PTRACE_SETOPTIONS.
Signed-off-by: Jann Horn <jannh@google.com>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Since commit 92d25637a3 ("kselftest: signal all child processes"), tests
are executed in background process groups. This means that trying to read
from stdin now throws SIGTTIN when stdin is a TTY, which breaks some
seccomp selftests that try to use read(0, NULL, 0) as a dummy syscall.
The simplest way to fix that is probably to just use -1 instead of 0 as
the dummy read()'s FD.
Fixes: 92d25637a3 ("kselftest: signal all child processes")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220319010011.1374622-1-jannh@google.com
asm/mce.h is not available on arm, and it is not needed to build nfit.c.
Remove the include.
It was likely needed for COPY_MC_TEST
Fixes: 3adb776384 ("x86, libnvdimm/test: Remove COPY_MC_TEST")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/20220429074334.21771-1-msuchanek@suse.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The ioremap passed as argument to __nfit_test_ioremap can be a macro so
it cannot be passed as function argument. Make __nfit_test_ioremap into
a macro so that ioremap can be passed as untyped macro argument.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Fixes: 6bc756193f ("tools/testing/nvdimm: libnvdimm unit test infrastructure")
Link: https://lore.kernel.org/r/20220429134039.18252-1-msuchanek@suse.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add selftests to verify the firmware upload mechanism. These test
include simple firmware uploads as well as upload cancellation and
error injection. The test creates three firmware devices and verifies
that they all work correctly and independently.
Tested-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220426163532.114961-1-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These might not be issues yet, but they make the script more fragile.
Also by fixing them we give a better example to future readers, who might
copy/paste or otherwise re-use snippets from our script.
- Use "read -r", since we don't ever want read to be interpreting '\'
characters as escape sequences...
- Quote variables, to deal with spaces properly.
- Use $() instead of the older and harder-to-nest ``.
- Get rid of superfluous "$" prefixes inside arithmetic $(()).
Link: https://lkml.kernel.org/r/20220421224928.1848230-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously, each test printed out its own header, dealt with its own
return code, etc. By just putting this standard stuff in a function, we
can delete > 300 lines from the script.
This also makes adding future tests easier. And, it gets rid of various
inconsistencies that already exist:
- Some tests correctly deal with ksft_skip, but others don't.
- Some tests just print the executable name, others print arguments, and
yet others print some comment in the header.
- Most tests print out a header with two separator lines, but not the
HMM smoke test or the memfd_secret test, which only print one.
- We had a redundant "exit" at the end, with all the boilerplate it's an
easy oversight.
Link: https://lkml.kernel.org/r/20220421224928.1848230-1-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This introduces three tests:
1) Sanity check soft dirty basic semantics: allocate area, clean,
dirty, check if the SD bit is flipped.
2) Check VMA reuse: validate the VM_SOFTDIRTY usage
3) Check soft-dirty on huge pages
This was motivated by Will Deacon's fix commit 912efa17e5 ("mm: proc:
Invalidate TLB after clearing soft-dirty page state"). I was tracking the
same issue that he fixed, and this test would have caught it.
Link: https://lkml.kernel.org/r/20220420084036.4101604-2-usama.anjum@collabora.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Will Deacon <will@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Bring common functions to a new file while keeping code as much same as
possible. These functions can be used in the new tests. This helps in
avoiding code duplication.
Link: https://lkml.kernel.org/r/20220420084036.4101604-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Gabriel Krisman Bertazi <krisman@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Print three possible reasons /sys/kernel/debug/gup_test cannot be opened
to help users of this test diagnose failures.
Link: https://lkml.kernel.org/r/20220405214809.3351223-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add some basic migration tests and in particular tests that will
stress both the pte and pmd migration entry wait paths.
Link: https://lkml.kernel.org/r/20220324014349.229253-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 0e4b01df86 ("mm, memcg: throttle allocators when failing
reclaim over memory.high") allocating memory over memory.high became very
time consuming. But it's exactly what the memory.high test from cgroup
kselftests is doing: it tries to allocate 100M with 30M memory.high value.
It takes forever to complete.
In order to keep it passing (or failing) in a reasonable amount of time
let's try to allocate only a little over 30M: 31M to be precise.
With this change test_memcontrol finishes in a reasonable amount of
time:
$ time ./test_memcontrol
ok 1 test_memcg_subtree_control
ok 2 test_memcg_current
ok 3 test_memcg_min
ok 4 test_memcg_low
ok 5 test_memcg_high
ok 6 test_memcg_max
ok 7 test_memcg_oom_events
ok 8 test_memcg_swap_max
ok 9 test_memcg_sock
ok 10 test_memcg_oom_group_leaf_events
ok 11 test_memcg_oom_group_parent_events
ok 12 test_memcg_oom_group_score_events
real 0m2.273s
user 0m0.064s
sys 0m0.739s
Link: https://lkml.kernel.org/r/20220415000133.3955987-3-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: David Vernet <void@manifault.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: memcg kselftests fixes".
This patch (of 4):
Commit 9852ae3fe5 ("mm, memcg: consider subtrees in memory.events") made
memory.events recursive: all events are propagated upwards by the tree.
It was a change in semantics.
It broke the oom group leaf events test: it assumes that after an OOM the
oom_kill counter is zero on parent's level.
Let's adjust the test: it should have similar expectations for the child
and parent levels.
The test passes after this fix.
Link: https://lkml.kernel.org/r/20220415000133.3955987-2-roman.gushchin@linux.dev
Link: https://lkml.kernel.org/r/20220415000133.3955987-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: David Vernet <void@manifault.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a subtest that excercises bpf_map__set_autocreate() API and
validates that libbpf properly fixes up BPF verifier log with correct
map information.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220428041523.4089853-5-andrii@kernel.org
Add new or modify existing SEC() definitions to be target-less and
validate that libbpf handles such program definitions correctly.
For kprobe/kretprobe we also add explicit test that generic
bpf_program__attach() works in cases when kprobe definition contains
proper target. It wasn't previously tested as selftests code always
explicitly specified the target regardless.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220428185349.3799599-4-andrii@kernel.org
and netfilter.
Current release - new code bugs:
- bridge: switchdev: check br_vlan_group() return value
- use this_cpu_inc() to increment net->core_stats, fix preempt-rt
Previous releases - regressions:
- eth: stmmac: fix write to sgmii_adapter_base
Previous releases - always broken:
- netfilter: nf_conntrack_tcp: re-init for syn packets only,
resolving issues with TCP fastopen
- tcp: md5: fix incorrect tcp_header_len for incoming connections
- tcp: fix F-RTO may not work correctly when receiving DSACK
- tcp: ensure use of most recently sent skb when filling rate samples
- tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
- virtio_net: fix wrong buf address calculation when using xdp
- xsk: fix forwarding when combining copy mode with busy poll
- xsk: fix possible crash when multiple sockets are created
- bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from
bpf_xmit lwt hook
- sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event
- wireguard: device: check for metadata_dst with skb_valid_dst()
- netfilter: update ip6_route_me_harder to consider L3 domain
- gre: make o_seqno start from 0 in native mode
- gre: switch o_seqno to atomic to prevent races in collect_md mode
Misc:
- add Eric Dumazet to networking maintainers
- dt: dsa: realtek: remove realtek,rtl8367s string
- netfilter: flowtable: Remove the empty file
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XOSt
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and netfilter.
Current release - new code bugs:
- bridge: switchdev: check br_vlan_group() return value
- use this_cpu_inc() to increment net->core_stats, fix preempt-rt
Previous releases - regressions:
- eth: stmmac: fix write to sgmii_adapter_base
Previous releases - always broken:
- netfilter: nf_conntrack_tcp: re-init for syn packets only,
resolving issues with TCP fastopen
- tcp: md5: fix incorrect tcp_header_len for incoming connections
- tcp: fix F-RTO may not work correctly when receiving DSACK
- tcp: ensure use of most recently sent skb when filling rate samples
- tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
- virtio_net: fix wrong buf address calculation when using xdp
- xsk: fix forwarding when combining copy mode with busy poll
- xsk: fix possible crash when multiple sockets are created
- bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from
bpf_xmit lwt hook
- sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event
- wireguard: device: check for metadata_dst with skb_valid_dst()
- netfilter: update ip6_route_me_harder to consider L3 domain
- gre: make o_seqno start from 0 in native mode
- gre: switch o_seqno to atomic to prevent races in collect_md mode
Misc:
- add Eric Dumazet to networking maintainers
- dt: dsa: realtek: remove realtek,rtl8367s string
- netfilter: flowtable: Remove the empty file"
* tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
tcp: fix F-RTO may not work correctly when receiving DSACK
Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"
net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK
ixgbe: ensure IPsec VF<->PF compatibility
MAINTAINERS: Update BNXT entry with firmware files
netfilter: nft_socket: only do sk lookups when indev is available
net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
bnx2x: fix napi API usage sequence
tls: Skip tls_append_frag on zero copy size
Add Eric Dumazet to networking maintainers
netfilter: conntrack: fix udp offload timeout sysctl
netfilter: nf_conntrack_tcp: re-init for syn packets only
net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
net: Use this_cpu_inc() to increment net->core_stats
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
ice: fix use-after-free when deinitializing mailbox snapshot
ice: wait 5 s for EMP reset after firmware flash
ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()
...
Currently the arm64 floating point tests don't support out of tree builds
due to two quirks of the kselftest build system. One is that when building
a program from multiple files we shouldn't separately compile the main
program to an object file as that will result in the pattern rule not
matching when adjusted for the output directory. The other is that we also
need to include $(OUTPUT) in the names of the binaries when specifying the
dependencies in order to ensure that they get picked up with O=.
Rewrite the dependencies for the executables to fix these issues. The
kselftest build system will ensure OUTPUT is always defined.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We provide a couple of object files with helpers linked into several of
the test programs, ensure they are cleaned.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some of the rules in lib.mk use a top_srcdir variable to figure out where
the top of the kselftest tree is, provide it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The kselftest lib.mk provides a default all target which builds additional
programs from TEST_GEN_PROGS_EXTENDED, use that rather than using
TEST_PROGS_EXTENDED which is for programs that don't need to be built like
shell scripts. Leave fpsimd-stress and sve-stress there since they are
scripts.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fix the following coccicheck warnings:
tools/testing/selftests/arm64/mte/check_child_memory.c:110:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:88:24-25:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:90:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:147:24-25:
WARNING: Use ARRAY_SIZE
`ARRAY_SIZE` macro is defined in tools/testing/selftests/kselftest.h.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419032501.22790-1-guozhengkui@vivo.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a small testcase that attempts to do a clone() with ZA enabled and
verifies that it remains enabled with the same contents. We only check
one word in one horizontal vector of ZA since there's already other tests
that check for data corruption more broadly, we're just looking to make
sure that ZA is still enabled and it looks like the data got copied.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220419112247.711548-40-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For every possible combination of SVE and SME vector length verify that for
each possible value of SVCR after a syscall we leave streaming mode and ZA
is preserved. We don't need to take account of any streaming/non streaming
SVE vector length changes in the assembler code since the store instructions
will handle the vector length for us. We log if the system supports FA64 and
only try to set FFR in streaming mode if it does.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-39-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add some basic coverage for the ZA ptrace interface, including walking
through all the vector lengths supported in the system. Unlike SVE
doing syscalls does not discard the ZA state so when we set data in ZA
we run the child process briefly, having it add one to each byte in ZA
in order to validate that both the vector size and data are being read
and written as expected when the process runs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-38-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In order to allow ptrace of streaming mode SVE registers we have added a
new regset for streaming mode which in isolation offers the same ABI as
regular SVE with a different vector type. Add this to the array of regsets
we handle, together with additional tests for the interoperation of the
two regsets.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-37-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add test cases for the SME signal handing ABI patterned off the SVE tests.
Due to the small size of the tests and the differences in ABI (especially
around needing to account for both streaming SVE and ZA) there is some code
duplication here.
We currently cover:
- Reporting of the vector length.
- Lack of support for changing vector length.
- Presence and size of register state for streaming SVE and ZA.
As with the SVE tests we do not yet have any validation of register
contents.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-36-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a stress test for context switching of the ZA register state based on
the similar tests Dave Martin wrote for FPSIMD and SVE registers. The test
loops indefinitely writing a data pattern to ZA then reading it back and
verifying that it's what was expected.
Unlike the other tests we manually assemble the SME instructions since at
present no released toolchain has SME support integrated.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-35-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As part of the generic code for signal handling test cases we parse all
signal frames to make sure they have at least the basic form we expect
and that there are no unexpected frames present in the signal context.
Add coverage of the ZA signal frame to this code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-34-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
One of the features of SME is the addition of streaming mode, in which we
have access to a set of streaming mode SVE registers at the SME vector
length. Since these are accessed using the SVE instructions let's reuse
the existing SVE stress test for testing with a compile time option for
controlling the few small differences needed:
- Enter streaming mode immediately on starting the program.
- In streaming mode FFR is removed so skip reading and writing FFR.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-33-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Provide RDVL helpers for SME and extend the main vector configuration tests
to cover SME.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-32-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Scalable Matrix Extension adds a new system register TPIDR2 intended to
be used by libc for its own thread specific use, add some kselftests which
exercise the ABI for it.
Since this test should with some adjustment work for TPIDR and any other
similar registers added in future add tests for it in a separate
directory rather than placing it with the other floating point tests,
nothing existing looked suitable so I created a new test directory
called "abi".
Since this feature is intended to be used by libc the test is built as
freestanding code using nolibc so we don't end up with the test program
and libc both trying to manage the register simultaneously and
distrupting each other. As a result of being written using nolibc rather
than using hwcaps to identify if SME is available in the system we check
for the default SME vector length configuration in proc, adding hwcap
support to nolibc seems like disproportionate effort and didn't feel
entirely idiomatic for what nolibc is trying to do.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-31-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Scalable Matrix Extenions (SME) introduces additional register state
with configurable vector lengths, similar to SVE but configured separately.
Extend vlset to support configuring this state with a --sme or -s command
line option.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-30-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As for the kernel so that we don't have ambitious toolchain requirements
to build the tests manually encode some of the SVE instructions.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-29-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The current tests use the prctls for various things but there's no
coverage of the edges of the interface so add some basics. This isn't
hugely useful as it is (it originally had some coverage for the
combinations with asymmetric mode but we removed the prctl() for that)
but it might be a helpful starting point for future work, for example
covering error handling.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419103243.24774-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we just have a big if statement with a non-specific diagnostic
checking both the mode and the tag. Since we'll need to dynamically check
for asymmetric mode support in the system and to improve debugability split
these checks out.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419103243.24774-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Help people figure out problems by printing a diagnostic when we get an
unexpected asynchronous fault.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419103243.24774-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The MTE selftests have a helper evaluate_test() which translates a return
code into a call to ksft_test_result_*(). Currently this only handles pass
and fail, silently ignoring any other code. Update the helper to support
skipped tests and log any unknown return codes as an error so we get at
least some diagnostic if anything goes wrong.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419103243.24774-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we validate that we can set the floating point state via the SVE
regset and read the data via the FPSIMD regset but we do not valiate that
the opposite case works as expected. Add a test that covers this case,
noting that when reading via SVE regset the kernel has the option of
returning either SVE or FPSIMD data so we need to accept both formats.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220404090613.181272-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently the sve-ptrace test for setting and reading FPSIMD data assumes
that the child will start off in FPSIMD only mode and that it can use this
to read some FPSIMD mode SVE ptrace data, skipping the test if it can't.
This isn't an assumption guaranteed by the ABI and also limits how we can
use this testcase within the program. Instead skip the initial read and
just generate a FPSIMD format buffer for the write part of the test, making
the coverage more robust in the face of future kernel and test program
changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220404090613.181272-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The comment for ptrace_sve_get_fpsimd_data() doesn't describe what the test
does at all, fix that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220404090613.181272-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Implement per subtest log collection for both parallel
and sequential test execution. This allows granular
per-subtest error output in the 'All error logs' section.
Add subtest log transfer into the protocol during the
parallel test execution.
Move all test log printing logic into dump_test_log
function. One exception is the output of test names when
verbose printing is enabled. Move test name/result
printing into separate functions to avoid repetition.
Print all successful subtest results in the log. Print
only failed test logs when test does not have subtests.
Or only failed subtests' logs when test has subtests.
Disable 'All error logs' output when verbose mode is
enabled. This functionality was already broken and is
causing confusion.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220427041353.246007-1-mykolal@fb.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-27
We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).
The main changes are:
1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
information about failed CO-RE relocations, from Andrii Nakryiko.
2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
(via probe read) and referenced ones that can be passed to in-kernel helpers,
from Kumar Kartikeya Dwivedi.
3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.
4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
the effective prog array before the rcu_read_lock, from Stanislav Fomichev.
5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
for USDT arguments under riscv{32,64}, from Pu Lehui.
6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.
7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
so it can be shipped under Alpine which is musl-based, from Dominique Martinet.
8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
need to use call_rcu_tasks_trace() barrier, from KP Singh.
9) Improve libbpf API documentation and fix error return handling of various
API functions, from Grant Seltzer.
10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
length of frags + frag_list may surpass old offset limit, from Liu Jian.
11) Various improvements to prog_tests in area of logging, test execution
and by-name subtest selection, from Mykola Lysenko.
12) Simplify map_btf_id generation for all map types by moving this process
to build time with help of resolve_btfids infra, from Menglong Dong.
13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
helpers; the probing caused always to use old helpers, from Runqing Yang.
14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
tracing macros, from Vladimir Isaev.
15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
switched to memcg-based memory accouting a while ago, from Yafang Shao.
16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.
17) Fix BPF selftests in two occasions to work around regressions caused by latest
LLVM to unblock CI until their fixes are worked out, from Yonghong Song.
18) Misc cleanups all over the place, from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add libbpf's log fixup logic selftests
libbpf: Fix up verifier log for unguarded failed CO-RE relos
libbpf: Simplify bpf_core_parse_spec() signature
libbpf: Refactor CO-RE relo human description formatting routine
libbpf: Record subprog-resolved CO-RE relocations unconditionally
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
libbpf: Fix logic for finding matching program for CO-RE relocation
libbpf: Drop unhelpful "program too large" guess
libbpf: Fix anonymous type check in CO-RE logic
bpf: Compute map_btf_id during build time
selftests/bpf: Add test for strict BTF type check
selftests/bpf: Add verifier tests for kptr
selftests/bpf: Add C tests for kptr
libbpf: Add kptr type tag macros to bpf_helpers.h
bpf: Make BTF type match stricter for release arguments
bpf: Teach verifier about kptr_get kfunc helpers
bpf: Wire up freeing of referenced kptr
bpf: Populate pairs of btf_id and destructor kfunc in btf
bpf: Adapt copy_map_value for multiple offset case
...
====================
Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the multiple checksum errors occur in chk_csum_nr(), print the
numbers of the errors as an extra message.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends chk_fail_nr to check the MP_FAIL response mibs.
Add a new argument invert for chk_fail_nr to allow it can check the
MP_FAIL TX and RX mibs from the opposite direction.
When the infinite map is received before the MP_FAIL response, the
response will be lost. A '-' can be added into fail_tx or fail_rx to
represent that MP_FAIL response TX or RX can be lost when doing the
checks.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the single subflow test case for MP_FAIL, to test the infinite
mapping case. Use the test_linkfail value to make 128KB test files.
Add a new function reset_with_fail(), in it use 'iptables' and 'tc
action pedit' rules to produce the bit flips to trigger the checksum
failures. Set validate_checksum to enable checksums for the MP_FAIL
tests without passing the '-C' argument. Set check_invert flag to
enable the invert bytes check for the output data in check_transfer().
Instead of the file mismatch error, this test prints out the inverted
bytes.
Add a new function pedit_action_pkts() to get the numbers of the packets
edited by the tc pedit actions. Print this numbers to the output.
Also add the needed kernel configures in the selftests config file.
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds a simple test of some basic matrix multiply assist (MMA)
instructions.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200622021832.15870-1-alistair@popple.id.au
Add tests validating that libbpf is indeed patching up BPF verifier log
with CO-RE relocation details. Also test partial and full truncation
scenarios.
This test might be a bit fragile due to changing BPF verifier log
format. If that proves to be frequently breaking, we can simplify tests
or remove the truncation subtests. But for now it seems useful to test
it in those conditions that are otherwise rarely occuring in practice.
Also test CO-RE relo failure in a subprog as that excercises subprogram CO-RE
relocation mapping logic which doesn't work out of the box without extra
relo storage previously done only for gen_loader case.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-11-andrii@kernel.org
Enhance linked_funcs selftest with two tricky features that might not
obviously work correctly together. We add CO-RE relocations to entry BPF
programs and mark those programs as non-autoloadable with SEC("?...")
annotation. This makes sure that libbpf itself handles .BTF.ext CO-RE
relocation data matching correctly for SEC("?...") programs, as well as
ensures that BPF static linker handles this correctly (this was the case
before, no changes are necessary, but it wasn't explicitly tested).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-6-andrii@kernel.org
Currently if opening /dev/null fails to open then file pointer fp
is null and further access to fp via fprintf will cause a null
pointer dereference. Fix this by returning a negative error value
when a null fp is detected.
Detected using cppcheck static analysis:
tools/testing/selftests/resctrl/fill_buf.c:124:6: note: Assuming
that condition '!fp' is not redundant
if (!fp)
^
tools/testing/selftests/resctrl/fill_buf.c:126:10: note: Null
pointer dereference
fprintf(fp, "Sum: %d ", ret);
Fixes: a2561b12fe ("selftests/resctrl: Add built in benchmark")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
All work currently pending will be done first by calling destroy_workqueue,
so there is no need to flush it explicitly.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220424062655.3221152-1-ran.jianping@zte.com.cn
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Ensure that the edge case where first member type was matched
successfully even if it didn't match BTF type of register is caught and
rejected by the verifier.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-14-memxor@gmail.com
Reuse bpf_prog_test functions to test the support for PTR_TO_BTF_ID in
BPF map case, including some tests that verify implementation sanity and
corner cases.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-13-memxor@gmail.com
This uses the __kptr and __kptr_ref macros as well, and tries to test
the stuff that is supposed to work, since we have negative tests in
test_verifier suite. Also include some code to test map-in-map support,
such that the inner_map_meta matches the kptr_off_tab of map added as
element.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-12-memxor@gmail.com
The function __perf_reg_mask has an unsigned return type, but returns a
negative constant to indicate an error condition. So we change unsigned
to int.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1650788802-14402-1-git-send-email-baihaowen@meizu.com
Add a new type flag for bpf_arg_type that when set tells verifier that
for a release function, that argument's register will be the one for
which meta.ref_obj_id will be set, and which will then be released
using release_reference. To capture the regno, introduce a new field
release_regno in bpf_call_arg_meta.
This would be required in the next patch, where we may either pass NULL
or a refcounted pointer as an argument to the release function
bpf_kptr_xchg. Just releasing only when meta.ref_obj_id is set is not
enough, as there is a case where the type of argument needed matches,
but the ref_obj_id is set to 0. Hence, we must enforce that whenever
meta.ref_obj_id is zero, the register that is to be released can only
be NULL for a release function.
Since we now indicate whether an argument is to be released in
bpf_func_proto itself, is_release_function helper has lost its utitlity,
hence refactor code to work without it, and just rely on
meta.release_regno to know when to release state for a ref_obj_id.
Still, the restriction of one release argument and only one ref_obj_id
passed to BPF helper or kfunc remains. This may be lifted in the future.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-3-memxor@gmail.com
resctrl_tests can be built or run using kselftests framework.
Add description on how to do so in README.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In kselftest framework, all tests can be build/run at a time,
and a sub test also can be build/run individually. As follows:
$ make kselftest-all TARGETS=resctrl
$ make -C tools/testing/selftests run_tests
$ make -C tools/testing/selftests TARGETS=resctrl run_tests
However, resctrl_tests cannot be run using kselftest framework,
users have to change directory to tools/testing/selftests/resctrl/,
run "make" to build executable file "resctrl_tests",
and run "sudo ./resctrl_tests" to execute the test.
To build/run resctrl_tests using kselftest framework.
Modify tools/testing/selftests/Makefile
and tools/testing/selftests/resctrl/Makefile.
Even after this change, users can still build/run resctrl_tests
without using framework as before.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> # resctrl changes
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In kselftest framework, if a sub test can not run by some reasons,
the test result should be marked as SKIP rather than FAIL.
Return KSFT_SKIP(4) instead of KSFT_FAIL(1) if resctrl_tests is not run
as root or it is run on a test environment which does not support resctrl.
- ksft_exit_fail_msg(): returns KSFT_FAIL(1)
- ksft_exit_skip(): returns KSFT_SKIP(4)
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When testing on a Intel(R) Xeon(R) Gold 6254 CPU @ 3.10GHz the resctrl
selftests fail due to timeout after exceeding the default time limit of
45 seconds. On this system the test takes about 68 seconds.
Since the failing test by default accesses a fixed size of memory, the
execution time should not vary significantly between different environment.
A new default of 120 seconds should be sufficient yet easy to customize
with the introduction of the "settings" file for reference.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In kselftest framework, a sub test is run using the timeout utility
and it will send SIGTERM to the test upon timeout.
In resctrl_tests, a child process is created by fork() to
run benchmark but SIGTERM is not set in sigaction().
If SIGTERM signal is received, the parent process will be killed,
but the child process still exists.
Kill child process before the parent process terminates
if SIGTERM signal is received.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
According to "Intel Resource Director Technology (Intel RDT) on
2nd Generation Intel Xeon Scalable Processors Reference Manual",
When the Intel Sub-NUMA Clustering(SNC) feature is enabled,
Intel CMT and MBM counters may not be accurate.
However, there does not seem to be an architectural way to detect
if SNC is enabled.
If the result of MBM&CMT test fails on Intel CPU,
print a message to let users know a possible cause of failure.
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, the resctrl_tests only has a function to detect AMD vendor.
Since when the Intel Sub-NUMA Clustering feature is enabled,
Intel CMT and MBM counters may not be accurate,
the resctrl_tests also need a function to detect Intel vendor.
And in the future, resctrl_tests will need a function to detect different
vendors, such as Arm.
Extend the function to detect Intel vendor as well. Also,
this function can be easily extended to detect other vendors.
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be supported with gcc v3.2,
the minimal required version for stable kernels.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be supported with gcc v3.2,
the minimal required version for stable kernels.
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from already included kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be compiled with gcc v3.2,
the minimal required version for stable kernels.
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: linux-mm@kvack.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Some selftests depend on information provided by the CPUID instruction.
To support this dependency the selftests implement private wrappers for
CPUID.
Duplication of the CPUID wrappers should be avoided.
Both gcc and clang/LLVM provide __cpuid_count() macros but neither
the macro nor its header file are available in all the compiler
versions that need to be supported by the selftests. __cpuid_count()
as provided by gcc is available starting with gcc v4.4, so it is
not available if the latest tests need to be run in all the
environments required to support kernels v4.9 and v4.14 that
have the minimal required gcc v3.2.
Duplicate gcc's __cpuid_count() macro to provide a centrally defined
macro for __cpuid_count() to help eliminate the duplicate CPUID wrappers
while continuing to compile in older environments.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the damon selftests are not built with the rest of the
selftests. We add damon to the list of targets.
Fixes: b348eb7abd ("mm/damon: add user space selftests")
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Yuanchu Xie <yuanchu@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Most of the test suites in tools/testing/selftests contain a config file
that specifies which kernel config options need to be present in order for
the test suite to be able to run and perform meaningful validation. There
is no config file for the tools/testing/selftests/cgroup test suite, so
this patch adds one.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup cpu controller selftests have a test_cpucg_max() testcase
that validates the behavior of the cpu.max knob. Let's also add a
testcase that verifies that the behavior works correctly when set on a
nested cgroup.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup cpu controller test suite has a number of testcases that
validate the expected behavior of the cpu.weight knob, but none for
cpu.max. This testcase fixes that by adding a testcase for cpu.max as well.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup cpu controller test suite currently contains a testcase called
test_cpucg_nested_weight_underprovisioned() which verifies the expected
behavior of cpu.weight when applied to nested cgroups. That first testcase
validated the expected behavior when the processes in the leaf cgroups
overcommitted the system. This patch adds a complementary
test_cpucg_nested_weight_underprovisioned() testcase which validates
behavior when those leaf cgroups undercommit the system.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup cpu controller tests in
tools/testing/selftests/cgroup/test_cpu.c have some testcases that validate
the expected behavior of setting cpu.weight on cgroups, and then hogging
CPUs. What is still missing from the suite is a testcase that validates
nested cgroups. This patch adds test_cpucg_nested_weight_overprovisioned(),
which validates that a parent's cpu.weight will override its children if
they overcommit a host, and properly protect any sibling groups of that
parent.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently the binderfs test says what failure it encountered
without saying why it may occurred when it fails to mount
binderfs. So, Warn about enabling CONFIG_ANDROID_BINDERFS in the
running kernel.
Signed-off-by: Karthik Alapati <mail@karthek.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Once line card is activated, check the device FW version is exposed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once line card is provisioned, check if HW revision and INI version
are exposed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once line card is provisioned, check the count of devices on it and
print them out.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not much of a test but we keep on getting problems with boolean controls
not being called Switches so let's add a few basic checks to help people
spot problems.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220421115020.14118-1-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds an initial subset of forwarding selftests which I considered
to be relevant for DSA drivers, along with a forwarding.config that
makes it easier to run them (disables veth pair creation, makes sure MAC
addresses are unique and stable).
The intention is to request driver writers to run these selftests during
review and make sure that the tests pass, or at least that the problems
are known.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This tests the capability of switch ports to filter out undesired
traffic. Different drivers are expected to have different capabilities
here (so some may fail and some may pass), yet the test still has some
value, for example to check for regressions.
There are 2 kinds of failures, one is when a packet which should have
been accepted isn't (and that should be fixed), and the other "failure"
(as reported by the test) is when a packet could have been filtered out
(for being unnecessary) yet it was received.
The bridge driver fares particularly badly at this test:
TEST: br0: Unicast IPv4 to primary MAC address [ OK ]
TEST: br0: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address [FAIL]
reception succeeded, but should have failed
TEST: br0: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to joined group [ OK ]
TEST: br0: Multicast IPv4 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: br0: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: br0: Multicast IPv6 to joined group [ OK ]
TEST: br0: Multicast IPv6 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: br0: Multicast IPv6 to unknown group, allmulti [ OK ]
mainly because it does not implement IFF_UNICAST_FLT. Yet I still think
having the test (with the failures) is useful in case somebody wants to
tackle that problem in the future, to make an easy before-and-after
comparison.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bombard a standalone switch port with various kinds of traffic to ensure
it is really standalone and doesn't leak packets to other switch ports.
Also check for switch ports in different bridges, and switch ports in a
VLAN-aware bridge but having different pvids. No forwarding should take
place in either case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pinging an IPv6 link-local multicast address selects the link-local
unicast address of the interface as source, and we'd like to monitor for
that in tcpdump.
Add a helper to the forwarding library which retrieves the link-local
IPv6 address of an interface, to make that task easier.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the forwarding library with calls to some small C programs which
join an IP multicast group and send some packets to it. Both IPv4 and
IPv6 groups are supported. Use cases range from testing IGMP/MLD
snooping, to RX filtering, to multicast routing.
Testing multicast traffic using msend/mreceive is intended to be done
using tcpdump.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend tcpdump_start() & C:o to handle multiple instances. Useful when
observing bridge operation, e.g., unicast learning/flooding, and any
case of multicast distribution (to these ports but not that one ...).
This means the interface argument is now a mandatory argument to all
tcpdump_*() functions, hence the changes to the ocelot flower test.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For some use-cases we may want to change the tcpdump flags used in
tcpdump_start(). For instance, observing interfaces without the PROMISC
flag, e.g. to see what's really being forwarded to the bridge interface.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By default, DSA switch ports inherit their MAC address from the DSA
master.
This works well for practical situations, but some selftests like
bridge_vlan_unaware.sh loop back 2 standalone DSA ports with 2 bridged
DSA ports, and require the bridge to forward packets between the
standalone ports.
Due to the bridge seeing that the MAC DA it needs to forward is present
as a local FDB entry (it coincides with the MAC address of the bridge
ports), the test packets are not forwarded, but terminated locally on
br0. In turn, this makes the ping and ping6 tests fail.
Address this by introducing an option to have stable MAC addresses.
When mac_addr_prepare is called, the current addresses of the netifs are
saved and replaced with 00:01:02:03:04:${netif number}. Then when
mac_addr_restore is called at the end of the test, the original MAC
addresses are restored. This ensures that the MAC addresses are unique,
which makes the test pass even for DSA ports.
The usage model is for the behavior to be opt-in via STABLE_MAC_ADDRS,
which DSA should set to true, all others behave as before. By hooking
the calls to mac_addr_prepare and mac_addr_restore within the forwarding
lib itself, we do not need to patch each individual selftest, the only
requirement is that pre_cleanup is called.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a function chk_infi_nr() to check the mibs for the
infinite mapping. Invoke it in chk_join_nr() when validate_checksum
is set.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Remove 's' & 'u' as valid ISA extension
* Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
x86:
* Fix NMI watchdog in guests on AMD
* Fix for SEV cache incoherency issues
* Don't re-acquire SRCU lock in complete_emulated_io()
* Avoid NULL pointer deref if VM creation fails
* Fix race conditions between APICv disabling and vCPU creation
* Bugfixes for disabling of APICv
* Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
selftests:
* Do not use bitfields larger than 32-bits, they differ between GCC and clang
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJi3KUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMhvQf/Yncfg3MkOvKsVxnCe7diKDTI/E2n
wBGNIcL8r7L9oIltHL4Mh7JQTacHFQOZ9PQ30NO1p+pznZ03e8LR59IF1JpP7VOU
sWrLZ5a4bIAEjOpA7Jxcee6hUBwewBauDgFLbb+YAI2lAahiH7jVfywDRife/c3k
N2LjeA75K8UvMiDCfjxxxerFJK91zaqjWlUNF2OhtFp/5pnMfS+nli9Q8QS837pZ
oUf+0Beb2RpSHan+wbYVU7X3ZLwtpR0M3w3uXOG+X3as56wDf26znXS02aSwa45x
lfX+pqJfmb4vCJJDXt6avH27EVgTq0Vew+BhQHG3VLRO6uxZ+smX6qmsuw==
=kvbw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"The main and larger change here is a workaround for AMD's lack of
cache coherency for encrypted-memory guests.
I have another patch pending, but it's waiting for review from the
architecture maintainers.
RISC-V:
- Remove 's' & 'u' as valid ISA extension
- Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
x86:
- Fix NMI watchdog in guests on AMD
- Fix for SEV cache incoherency issues
- Don't re-acquire SRCU lock in complete_emulated_io()
- Avoid NULL pointer deref if VM creation fails
- Fix race conditions between APICv disabling and vCPU creation
- Bugfixes for disabling of APICv
- Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
selftests:
- Do not use bitfields larger than 32-bits, they differ between GCC
and clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: selftests: introduce and use more page size-related constants
kvm: selftests: do not use bitfields larger than 32-bits for PTEs
KVM: SEV: add cache flush to solve SEV cache incoherency issues
KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
KVM: SVM: Simplify and harden helper to flush SEV guest page(s)
KVM: selftests: Silence compiler warning in the kvm_page_table_test
KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
KVM: SPDX style and spelling fixes
KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
KVM: nVMX: Defer APICv updates while L2 is active until L1 is active
KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
RISC-V: KVM: Restrict the extensions that can be disabled
RISC-V: KVM: Remove 's' & 'u' as valid ISA extension
It turns out that by having CONFIG_ACPI=n, we've been failing to boot
additional CPUs, and so these systems were functionally UP. The code
bloat is unfortunate for build times, but I don't see an alternative. So
this commit sets CONFIG_ACPI=y for x86_64 and i686 configs.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use bpf_link_create() API in fexit_stress test to attach FEXIT programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Kui-Feng Lee <kuifeng@fb.com>
Link: https://lore.kernel.org/bpf/20220421033945.3602803-4-andrii@kernel.org
test_cpu.c includes testcases that validate the cgroup cpu controller.
This patch adds a new testcase called test_cpucg_weight_underprovisioned()
that verifies that processes with different cpu.weight that are all running
on an underprovisioned system, still get roughly the same amount of cpu
time.
Because test_cpucg_weight_underprovisioned() is very similar to
test_cpucg_weight_overprovisioned(), this patch also pulls the common logic
into a separate helper function that is invoked from both testcases, and
which uses function pointers to invoke the unique portions of the
testcases.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
test_cpu.c includes testcases that validate the cgroup cpu controller.
This patch adds a new testcase called test_cpucg_weight_overprovisioned()
that verifies the expected behavior of creating multiple processes with
different cpu.weight, on a system that is overprovisioned.
So as to avoid code duplication, this patch also updates cpu_hog_func_param
to take a new hog_clock_type enum which informs how time is counted in
hog_cpus_timed() (either process time or wall clock time).
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
test_cpu.c includes testcases that validate the cgroup cpu controller.
This patch adds a new testcase called test_cpucg_stats() that verifies the
expected behavior of the cpu.stat interface. In doing so, we define a
new hog_cpus_timed() function which takes a cpu_hog_func_param struct
that configures how many CPUs it uses, and how long it runs. Future
patches will also spawn threads that hog CPUs, so this function will
eventually serve those use-cases as well.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup selftests suite currently contains tests that validate various
aspects of cgroup, such as validating the expected behavior for memory
controllers, the expected behavior of cgroup.procs, etc. There are no tests
that validate the expected behavior of the cgroup cpu controller.
This patch therefore adds a new test_cpu.c file that will contain cpu
controller testcases. The file currently only contains a single testcase
that validates creating nested cgroups with cgroup.subtree_control
including cpu. Future patches will add more sophisticated testcases that
validate functional aspects of the cpu controller.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Turn kmem_cache_alloc() into a wrapper around kmem_cache_alloc_lru().
Fixes: 9bbdc0f324 ("xarray: use kmem_cache_alloc_lru to allocate xa_node")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Li Wang <liwang@redhat.com>
Merge misc fixes from Andrew Morton:
"13 patches.
Subsystems affected by this patch series: mm (memory-failure, memcg,
userfaultfd, hugetlbfs, mremap, oom-kill, kasan, hmm), and kcov"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/mmu_notifier.c: fix race in mmu_interval_notifier_remove()
kcov: don't generate a warning on vm_insert_page()'s failure
MAINTAINERS: add Vincenzo Frascino to KASAN reviewers
oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup
selftest/vm: add skip support to mremap_test
selftest/vm: support xfail in mremap_test
selftest/vm: verify remap destination address in mremap_test
selftest/vm: verify mmap addr in mremap_test
mm, hugetlb: allow for "high" userspace addresses
userfaultfd: mark uffd_wp regardless of VM_WRITE flag
memcg: sync flush only if periodic flush is delayed
mm/memory-failure.c: skip huge_zero_page in memory_failure()
mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()
The xz -9 option leads to an unnecessarily too large dictionary that
isn't really suitable for the kernel firmware loader. Pass the
dictionary size explicitly, instead.
While we're at it, make the xz command call defined in $RUN_XZ for
simplicity.
Fixes: 108ae07c50 ("selftests: firmware: Add compressed firmware tests")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220421152908.4718-3-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow the mremap test to be skipped due to errors such as failing to
parse the mmap_min_addr sysctl.
Link: https://lkml.kernel.org/r/20220420215721.4868-4-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use ksft_test_result_xfail for the tests which are expected to fail.
Link: https://lkml.kernel.org/r/20220420215721.4868-3-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because mremap does not have a MAP_FIXED_NOREPLACE flag, it can destroy
existing mappings. This causes a segfault when regions such as text are
remapped and the permissions are changed.
Verify the requested mremap destination address does not overlap any
existing mappings by using mmap's MAP_FIXED_NOREPLACE flag. Keep
incrementing the destination address until a valid mapping is found or
fail the current test once the max address is reached.
Link: https://lkml.kernel.org/r/20220420215721.4868-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoid calling mmap with requested addresses that are less than the
system's mmap_min_addr. When run as root, mmap returns EACCES when
trying to map addresses < mmap_min_addr. This is not one of the error
codes for the condition to retry the mmap in the test.
Rather than arbitrarily retrying on EACCES, don't attempt an mmap until
addr > vm.mmap_min_addr.
Add a munmap call after an alignment check as the mappings are retained
after the retry and can reach the vm.max_map_count sysctl.
Link: https://lkml.kernel.org/r/20220420215721.4868-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clean up code that was hardcoding masks for various fields,
now that the masks are included in processor.h.
For more cleanup, define PAGE_SIZE and PAGE_MASK just like in Linux.
PAGE_SIZE in particular was defined by several tests.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Red Hat's QE team reported test failure on access_tracking_perf_test:
Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages
guest physical test memory offset: 0x3fffbffff000
Populating memory : 0.684014577s
Writing to populated memory : 0.006230175s
Reading from populated memory : 0.004557805s
==== Test Assertion Failure ====
lib/kvm_util.c:1411: false
pid=125806 tid=125809 errno=4 - Interrupted system call
1 0x0000000000402f7c: addr_gpa2hva at kvm_util.c:1411
2 (inlined by) addr_gpa2hva at kvm_util.c:1405
3 0x0000000000401f52: lookup_pfn at access_tracking_perf_test.c:98
4 (inlined by) mark_vcpu_memory_idle at access_tracking_perf_test.c:152
5 (inlined by) vcpu_thread_main at access_tracking_perf_test.c:232
6 0x00007fefe9ff81ce: ?? ??:0
7 0x00007fefe9c64d82: ?? ??:0
No vm physical memory at 0xffbffff000
I can easily reproduce it with a Intel(R) Xeon(R) CPU E5-2630 with 46 bits
PA.
It turns out that the address translation for clearing idle page tracking
returned a wrong result; addr_gva2gpa()'s last step, which is based on
"pte[index[0]].pfn", did the calculation with 40 bits length and the
high 12 bits got truncated. In above case the GPA address to be returned
should be 0x3fffbffff000 for GVA 0xc0000000, but it got truncated into
0xffbffff000 and the subsequent gpa2hva lookup failed.
The width of operations on bit fields greater than 32-bit is
implementation defined, and differs between GCC (which uses the bitfield
precision) and clang (which uses 64-bit arithmetic), so this is a
potential minefield. Remove the bit fields and using manual masking
instead.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2075036
Reported-by: Nana Liu <nanliu@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current release - regressions:
- rxrpc: restore removed timer deletion
Current release - new code bugs:
- gre: fix device lookup for l3mdev use-case
- xfrm: fix egress device lookup for l3mdev use-case
Previous releases - regressions:
- sched: cls_u32: fix netns refcount changes in u32_change()
- smc: fix sock leak when release after smc_shutdown()
- xfrm: limit skb_page_frag_refill use to a single page
- eth: atlantic: invert deep par in pm functions, preventing null
derefs
- eth: stmmac: use readl_poll_timeout_atomic() in atomic state
Previous releases - always broken:
- gre: fix skb_under_panic on xmit
- openvswitch: fix OOB access in reserve_sfa_size()
- dsa: hellcreek: calculate checksums in tagger
- eth: ice: fix crash in switchdev mode
- eth: igc:
- fix infinite loop in release_swfw_sync
- fix scheduling while atomic
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=thBq
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from xfrm and can.
Current release - regressions:
- rxrpc: restore removed timer deletion
Current release - new code bugs:
- gre: fix device lookup for l3mdev use-case
- xfrm: fix egress device lookup for l3mdev use-case
Previous releases - regressions:
- sched: cls_u32: fix netns refcount changes in u32_change()
- smc: fix sock leak when release after smc_shutdown()
- xfrm: limit skb_page_frag_refill use to a single page
- eth: atlantic: invert deep par in pm functions, preventing null
derefs
- eth: stmmac: use readl_poll_timeout_atomic() in atomic state
Previous releases - always broken:
- gre: fix skb_under_panic on xmit
- openvswitch: fix OOB access in reserve_sfa_size()
- dsa: hellcreek: calculate checksums in tagger
- eth: ice: fix crash in switchdev mode
- eth: igc:
- fix infinite loop in release_swfw_sync
- fix scheduling while atomic"
* tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
drivers: net: hippi: Fix deadlock in rr_close()
selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets
selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets
nfc: MAINTAINERS: add Bug entry
net: stmmac: Use readl_poll_timeout_atomic() in atomic state
doc/ip-sysctl: add bc_forwarding
netlink: reset network and mac headers in netlink_dump()
net: mscc: ocelot: fix broken IP multicast flooding
net: dsa: hellcreek: Calculate checksums in tagger
net: atlantic: invert deep par in pm functions, preventing null derefs
can: isotp: stop timeout monitoring when no first frame was sent
bonding: do not discard lowest hash bit for non layer3+4 hashing
net: lan966x: Make sure to release ptp interrupt
ipv6: make ip6_rt_gc_expire an atomic_t
net: Handle l3mdev in ip_tunnel_init_flow
l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu
net/sched: cls_u32: fix possible leak in u32_init_knode()
net/sched: cls_u32: fix netns refcount changes in u32_change()
powerpc: Update MAINTAINERS for ibmvnic and VAS
net: restore alpha order to Ethernet devices in config
...
When compiling kvm_page_table_test.c, I get this compiler warning
with gcc 11.2:
kvm_page_table_test.c: In function 'pre_init_before_test':
../../../../tools/include/linux/kernel.h:44:24: warning: comparison of
distinct pointer types lacks a cast
44 | (void) (&_max1 == &_max2); \
| ^~
kvm_page_table_test.c:281:21: note: in expansion of macro 'max'
281 | alignment = max(0x100000, alignment);
| ^~~
Fix it by adjusting the type of the absolute value.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20220414103031.565037-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switching to libbpf 1.0 API broke test_lpm_map and test_lru_map as error
reporting changed. Instead of setting errno and returning -1 bpf calls
now return -Exxx directly.
Drop errno checks and look at return code directly.
Fixes: b858ba8c52 ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20220421094320.1563570-1-asavkov@redhat.com
I am getting the following compilation error for prog_tests/uprobe_autoattach.c:
tools/testing/selftests/bpf/prog_tests/uprobe_autoattach.c: In function ‘test_uprobe_autoattach’:
./test_progs.h:209:26: error: pointer ‘mem’ may be used after ‘free’ [-Werror=use-after-free]
The value of mem is now used in one of the asserts, which is why it may be
confusing compilers. However, it is not dereferenced. Silence this by moving
free(mem) after the assert block.
Fixes: 1717e24801 ("selftests/bpf: Uprobe tests should verify param/return values")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220421132317.1583867-1-asavkov@redhat.com
Switching to libbpf 1.0 API broke test_sock and test_sysctl as they
check for return of bpf_prog_attach to be exactly -1. Switch the check
to '< 0' instead.
Fixes: b858ba8c52 ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20220421130104.1582053-1-asavkov@redhat.com
The torture.sh script provides extra memory for scftorture and rcuscale.
However, the total memory provided is only 1G, which is less than the
2G that is required for KASAN testing. This commit therefore ups the
torture.sh script's 1G to 2G.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that the Tasks RCU flavors are selected by their users rather than
by the rcutorture scenarios, torture.sh fails when attempting to run
NOPREEMPT scenarios for refscale and rcuscale. This commit therefore
makes torture.sh specify CONFIG_TASKS_TRACE_RCU=y to avoid such failure.
Why not also CONFIG_TASKS_RCU? Because tracing selects this one.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
KASAN allots significant memory to track allocation state, and the amount
of memory has increased recently, which results in frequent OOMs on a
few of the rcutorture scenarios. This commit therefore provides 2G of
memory for --kasan runs, up from the 512M default.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, torture.sh saves only the build output and exit code from the
"make allmodconfig" test. This commit also saves the .config file.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is an extraneous "scf" in the per_version_boot_params shell function
used by scftorture. No harm done in that it is just passed as an argument
to the /init program in initrd, but this commit nevertheless removes it.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that CONFIG_PREEMPT_DYNAMIC=y is the default, kernels that are
ostensibly built with CONFIG_PREEMPT_NONE=y or CONFIG_PREEMPT_VOLUNTARY=y
are now actually built with CONFIG_PREEMPT=y, but are by default booted
so as to disable preemption. Although this allows much more flexibility
from a single kernel binary, it means that the current rcutorture
scenarios won't find build errors that happen only when preemption is
fully disabled at build time.
This commit therefore adds CONFIG_PREEMPT_DYNAMIC=n to several scenarios,
and while in the area switches one from CONFIG_PREEMPT_NONE=y to
CONFIG_PREEMPT_VOLUNTARY=y to add coverage of this Kconfig option.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit passes the csdlock_debug=1 kernel parameter in order to
enable CSD-lock stall reports for torture.sh scftorure runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvm-again.sh script reruns an previously built set of kernels, so
the vmlinux files are associated with that previous run, not this on.
This results in kvm-find_errors.sh reporting spurious failed-build errors.
This commit therefore omits the vmlinux check for kvm-again.sh runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adjusts the scftorture PREEMPT and NOPREEMPT scenarios to
account for the TASKS_RCU Kconfig option being explicitly selected rather
than computed in isolation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds rcuscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of rcuscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds rcuscale, whether built-in or as
a module, in which case RCU Tasks is (unnecessarily) built. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of rcuscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds refscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of refscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds refscale, whether built-in or as a
module, in which case RCU Tasks is (unnecessarily) built in. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of refscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcutorture test suite makes double use of the rcutorture.stat_interval
module parameter. As its name suggests, it controls the frequency
of statistics printing, but it also controls the rcu_torture_writer()
stall timeout. The current setting of 15 seconds works surprisingly well.
However, given that the RCU tasks stall-warning timeout is ten -minutes-,
15 seconds is too short for TASKS02, which runs a non-preemptible kernel
on a single CPU.
This commit therefore adds checks for per-scenario specification of the
rcutorture.stat_interval module parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that CONFIG_PREEMPT_DYNAMIC=y is the default, TASKS02 no longer
builds a pure non-preemptible kernel that uses Tiny RCU. This commit
therefore fixes this new hole in rcutorture testing by adding
CONFIG_PREEMPT_DYNAMIC=n to the TASKS02 rcutorture scenario.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_RUDE_RCU, whether anything else
needs Tasks Rude RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Rude.
However, there is a need to select CONFIG_TASKS_RUDE_RCU for testing
purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is
thus a CONFIG_FORCE_TASKS_RUDE_RCU that selects CONFIG_TASKS_RUDE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds rcutorture, whether built-in or as
a module, in which case RCU Tasks is (unnecessarily) used. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of rcutorture
from the presence of RCU Tasks.
However, there is a need to select CONFIG_TASKS_RCU for testing purposes.
Except that casual users must not be bothered with questions -- for them,
this needs to be fully automated. There is thus a CONFIG_FORCE_TASKS_RCU
that selects CONFIG_TASKS_RCU, is user-selectable, but which depends
on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_TRACE_RCU, whether anything else
needs Tasks Trace RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Trace.
However, there is a need to select CONFIG_TASKS_TRACE_RCU for
testing purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is thus
a CONFIG_FORCE_TASKS_TRACE_RCU that selects CONFIG_TASKS_TRACE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, any kernel built with CONFIG_PREEMPTION=y also gets
CONFIG_TASKS_RCU=y, which is not helpful to people trying to build
preemptible kernels of minimal size.
Because CONFIG_TASKS_RCU=y is needed only in kernels doing tracing of
one form or another, this commit moves from TASKS_RCU deciding when it
should be enabled to the tracing Kconfig options explicitly selecting it.
This allows building preemptible kernels without TASKS_RCU, if desired.
This commit also updates the SRCU-N and TREE09 rcutorture scenarios
in order to avoid Kconfig errors that would otherwise result from
CONFIG_TASKS_RCU being selected without its CONFIG_RCU_EXPERT dependency
being met.
[ paulmck: Apply BPF_SYSCALL feedback from Andrii Nakryiko. ]
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Use bpf_prog_test_run_opts to test the skb_load_bytes function. Tests
the behavior when offset is greater than INT_MAX or a normal value.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220416105801.88708-4-liujian56@huawei.com
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes: d01724dd2a ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes: 94d302deae ("selftests: mlxsw: Add a test for VxLAN flooding")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop duplicate macro min() definition in mq_perf_tests.c, use MIN() in
sys/param.h instead.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This is the mips variant of commit <3990b5baf225> ("selftests/ftrace:
Add s390 support for kprobe args tests").
Signed-off-by: Ze Zhang <zhangze@loongson.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This is the mips variant of commit <3990b5baf225> ("selftests/ftrace:
Add s390 support for kprobe args tests").
Signed-off-by: Ze Zhang <zhangze@loongson.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a few test cases that ensure we catch cases of badly ordered type
tags in modifier chains.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220419164608.1990559-3-memxor@gmail.com
Take advantage of new libbpf feature for declarative non-autoloaded BPF
program SEC() definitions in few test that test single program at a time
out of many available programs within the single BPF object.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220419002452.632125-2-andrii@kernel.org
The llvm patch [1] enabled opaque pointer which caused selftest
'exhandler' failure.
...
; work = task->task_works;
7: (79) r1 = *(u64 *)(r6 +2120) ; R1_w=ptr_callback_head(off=0,imm=0) R6_w=ptr_task_struct(off=0,imm=0)
; func = work->func;
8: (79) r2 = *(u64 *)(r1 +8) ; R1_w=ptr_callback_head(off=0,imm=0) R2_w=scalar()
; if (!work && !func)
9: (4f) r1 |= r2
math between ptr_ pointer and register with unbounded min value is not allowed
below is insn 10 and 11
10: (55) if r1 != 0 goto +5
11: (18) r1 = 0 ll
...
In llvm, the code generation of 'r1 |= r2' happened in codegen
selectiondag phase due to difference of opaque pointer vs. non-opaque pointer.
Without [1], the related code looks like:
r2 = *(u64 *)(r6 + 2120)
r1 = *(u64 *)(r2 + 8)
if r2 != 0 goto +6 <LBB0_4>
if r1 != 0 goto +5 <LBB0_4>
r1 = 0 ll
...
I haven't found a good way in llvm to fix this issue. So let us workaround the
problem first so bpf CI won't be blocked.
[1] https://reviews.llvm.org/D123300
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220419050900.3136024-1-yhs@fb.com
This is a pre-req to add separate logging for each subtest in
test_progs.
Move all the mutable test data to the test_result struct.
Move per-test init/de-init into the run_one_test function.
Consolidate data aggregation and final log output in
calculate_and_print_summary function.
As a side effect, this patch fixes double counting of errors
for subtests and possible duplicate output of subtest log
on failures.
Also, add prog_tests_framework.c test to verify some of the
counting logic.
As part of verification, confirmed that number of reported
tests is the same before and after the change for both parallel
and sequential test execution.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220418222507.1726259-1-mykolal@fb.com
Introduce basic line card manipulation which consists of provisioning,
unprovisioning and activation of a line card.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rebecca Mckeever
Casper Andersson
Adam Sindelar
Edward Liaw
Zan Aziz
Hangbin Liu
Jakub Kicinski
Daniel Borkmann
Stanislav Fomichev
Li kunyu
Alaa Mohamed
Christoph Hellwig
Linus Torvalds
Maciej Fijalkowski
Quentin Monnet
Coleman Dietsch
Petr Machata
Michael Ellerman
Dan Williams
Mat Martineau
Paolo Abeni
Kajol Jain
Athira Rajeev
Andrii Nakryiko
Gautam Menghani
Johannes Holland
Michael Jeanson
Victor Nogueira
Xiang wangx
akpm
liujing
Jakub Sitnicki
Eduard Zingerman
Zeng Guang
Jue Wang
Ben Gardon
Sean Christopherson
Ard Biesheuvel
Dimitris Michailidis
Jörn-Thorben Hinz
Raghavendra Rao Ananta
Dave Marchevsky
Paul E. McKenney
Jie2x Zhou
Maxim Mikityanskiy
Riccardo Paolo Bestetti
Ido Schimmel
Amit Cohen
Javier Martinez Canillas
Joel Savitz
Patrick Wang
Jiri Olsa
Delyan Kratunov
Ding Xiang
Yu Liao
Joanne Koong
Andrei Vagin
Janis Schoetterl-Glausch
Shaoqin Huang
Yonghong Song
Mark Brown
Andrew Jones
Feng Zhou
Jason A. Donenfeld
Paolo Bonzini
David Matlack
Chenyi Qiang
Guo Zhengkui
Maciej S. Szmigiero
Toke Høiland-Jørgensen
Vitaly Kuznetsov
Lina Wang
Martin KaFai Lau
Yuntao Wang
Daniel Müller
Cristian Marussi
Thomas Huth
Florian Westphal
Arun Ajith S
Michal Koutný
Song Liu
luyun
Muhammad Usama Anjum
Julia Lawall
Suren Baghdasaryan
Christophe JAILLET
Like Xu
Yang Weijiang
Colin Ian King
Mickaël Salaün
Vladimir Oltean
Madhavan Srinivasan
Russell Currey
Alan Maguire
Mykola Lysenko
Geliang Tang
Nicolas Rybowski
Steffen Eiden
Aaron Lewis
Jiapeng Chong
Anup Patel
Greg Kroah-Hartman
Joachim Wiberg
David Gow
Danielle Ratson
Yosry Ahmed
Jane Chu
Brendan Higgins
Daniel Latypov
Andre Przywara
Marc Zyngier
Waiman Long
David Vernet
Peter Xu
Niels Dossche
SeongJae Park
Alexei Starovoitov
Vladis Dronov
Phil Auld
Tiezhu Yang
Kees Cook
Kumar Kartikeya Dwivedi
Magnus Karlsson
Kui-Feng Lee
Dmitrii Dolgov
Kaixi Fan
Takshak Chahande
Carlos Llamas
Nicolas Dichtel
Kishen Maloor
Oliver Upton
Sargun Dhillon
Marc Kleine-Budde
Tonghao Zhang
Jaehee Park
Yang Guang
Jann Horn
Michal Suchanek
Russ Weight
Axel Rasmussen
Gabriel Krisman Bertazi
Sidhartha Kumar
Alistair Popple
Roman Gushchin
Alistair Popple
ran jianping
Haowen Bai
Shaopeng Tan
Reinette Chatre
Yuanchu Xie
Karthik Alapati
Jiri Pirko
Matthew Wilcox (Oracle)
Takashi Iwai
Artem Savkov
Liu Jian
Ze Zhang