Commit 704c91e59f ('selftests/bpf: Test "bpftool gen min_core_btf"')
added a test test_core_btfgen to test core relocation with btf
generated with 'bpftool gen min_core_btf'. Currently,
among 76 subtests, 25 are skipped.
...
#46/69 core_reloc_btfgen/enumval:OK
#46/70 core_reloc_btfgen/enumval___diff:OK
#46/71 core_reloc_btfgen/enumval___val3_missing:OK
#46/72 core_reloc_btfgen/enumval___err_missing:SKIP
#46/73 core_reloc_btfgen/enum64val:OK
#46/74 core_reloc_btfgen/enum64val___diff:OK
#46/75 core_reloc_btfgen/enum64val___val3_missing:OK
#46/76 core_reloc_btfgen/enum64val___err_missing:SKIP
...
#46 core_reloc_btfgen:SKIP
Summary: 1/51 PASSED, 25 SKIPPED, 0 FAILED
Alexei found that in the above core_reloc_btfgen/enum64val___err_missing
should not be skipped.
Currently, the core_reloc tests have some negative tests.
In Commit 704c91e59f, for core_reloc_btfgen, all negative tests
are skipped with the following condition
if (!test_case->btf_src_file || test_case->fails) {
test__skip();
continue;
}
This is too conservative. Negative tests do not fail
mkstemp() and run_btfgen() should not be skipped.
There are a few negative tests indeed failing run_btfgen()
and this patch added 'run_btfgen_fails' to mark these tests
so that they can be skipped for btfgen tests. With this,
we have
...
#46/69 core_reloc_btfgen/enumval:OK
#46/70 core_reloc_btfgen/enumval___diff:OK
#46/71 core_reloc_btfgen/enumval___val3_missing:OK
#46/72 core_reloc_btfgen/enumval___err_missing:OK
#46/73 core_reloc_btfgen/enum64val:OK
#46/74 core_reloc_btfgen/enum64val___diff:OK
#46/75 core_reloc_btfgen/enum64val___val3_missing:OK
#46/76 core_reloc_btfgen/enum64val___err_missing:OK
...
Summary: 1/62 PASSED, 14 SKIPPED, 0 FAILED
Totally 14 subtests are skipped instead of 25.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220614055526.628299-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Unlike GCC clang uses a single compiler image to support multiple target
architectures meaning that we can't simply rely on CROSS_COMPILE to select
the output architecture. Instead we must pass --target to the compiler to
tell it what to output, kselftest was not doing this so cross compilation
of kselftest using clang resulted in kselftest being built for the host
architecture.
More work is required to fix tests using custom rules but this gets the
bulk of things building.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Replace calls to kvm_check_cap() that treat its return as a boolean with
calls to kvm_has_cap(). Several instances of kvm_check_cap() were missed
when kvm_has_cap() was introduced.
Reported-by: Andrew Jones <drjones@redhat.com>
Fixes: 3ea9b80965 ("KVM: selftests: Add kvm_has_cap() to provide syntactic sugar")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613161942.1586791-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a duplicate TEST_ASSERT() on the number of runnable vCPUs in
vm_nr_pages_required() that snuck in during a rebase gone bad.
Reported-by: Andrew Jones <drjones@redhat.com>
Fixes: 6e1d13bf38 ("KVM: selftests: Move per-VM/per-vCPU nr pages calculation to __vm_create()")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613161942.1586791-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the goofy static_assert on the size of the @vm/@vcpu parameters
with a call to a dummy helper, i.e. let the compiler naturally complain
about an incompatible type instead of homebrewing a poor replacement.
Reported-by: Andrew Jones <drjones@redhat.com>
Fixes: fcba483e82 ("KVM: selftests: Sanity check input to ioctls() at build time")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613161942.1586791-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an apostrophe in a comment about it being the caller's, not callers,
responsibility to free an object.
Reported-by: Andrew Jones <drjones@redhat.com>
Fixes: 768e9a6185 ("KVM: selftests: Purge vm+vcpu_id == vcpu silliness")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613161942.1586791-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_binary_stats_test accepts two arguments, the number of vms
and number of vcpus. If these inputs are not equal then the
test would likely crash for one reason or another due to using
miscalculated indices for the vcpus array. Fix the index
expressions by swapping the use of i and j.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20220614081041.2571511-1-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Properly reset the SVE/SME flags on vcpu load
* Fix a vgic-v2 regression regarding accessing the pending
state of a HW interrupt from userspace (and make the code
common with vgic-v3)
* Fix access to the idreg range for protected guests
* Ignore 'kvm-arm.mode=protected' when using VHE
* Return an error from kvm_arch_init_vm() on allocation failure
* A bunch of small cleanups (comments, annotations, indentation)
RISC-V:
* Typo fix in arch/riscv/kvm/vmid.c
* Remove broken reference pattern from MAINTAINERS entry
x86-64:
* Fix error in page tables with MKTME enabled
* Dirty page tracking performance test extended to running a nested
guest
* Disable APICv/AVIC in cases that it cannot implement correctly
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKjTIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNhPQgAiIVtp8aepujUM/NhkNyK3SIdLzlS
oZCZiS6bvaecKXi/QvhBU0EBxAEyrovk3lmVuYNd41xI+PDjyaA4SDIl5DnToGUw
bVPNFSYqjpF939vUUKjc0RCdZR4o5g3Od3tvWoHTHviS1a8aAe5o9pcpHpD0D6Mp
Gc/o58nKAOPl3htcFKmjymqo3Y6yvkJU9NB7DCbL8T5mp5pJ959Mw1/LlmBaAzJC
OofrynUm4NjMyAj/mAB1FhHKFyQfjBXLhiVlS0SLiiEA/tn9/OXyVFMKG+n5VkAZ
Q337GMFe2RikEIuMEr3Rc4qbZK3PpxHhaj+6MPRuM0ho/P4yzl2Nyb/OhA==
=h81Q
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"While last week's pull request contained miscellaneous fixes for x86,
this one covers other architectures, selftests changes, and a bigger
series for APIC virtualization bugs that were discovered during 5.20
development. The idea is to base 5.20 development for KVM on top of
this tag.
ARM64:
- Properly reset the SVE/SME flags on vcpu load
- Fix a vgic-v2 regression regarding accessing the pending state of a
HW interrupt from userspace (and make the code common with vgic-v3)
- Fix access to the idreg range for protected guests
- Ignore 'kvm-arm.mode=protected' when using VHE
- Return an error from kvm_arch_init_vm() on allocation failure
- A bunch of small cleanups (comments, annotations, indentation)
RISC-V:
- Typo fix in arch/riscv/kvm/vmid.c
- Remove broken reference pattern from MAINTAINERS entry
x86-64:
- Fix error in page tables with MKTME enabled
- Dirty page tracking performance test extended to running a nested
guest
- Disable APICv/AVIC in cases that it cannot implement correctly"
[ This merge also fixes a misplaced end parenthesis bug introduced in
commit 3743c2f025 ("KVM: x86: inhibit APICv/AVIC on changes to APIC
ID or APIC base") pointed out by Sean Christopherson ]
Link: https://lore.kernel.org/all/20220610191813.371682-1-seanjc@google.com/
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits)
KVM: selftests: Restrict test region to 48-bit physical addresses when using nested
KVM: selftests: Add option to run dirty_log_perf_test vCPUs in L2
KVM: selftests: Clean up LIBKVM files in Makefile
KVM: selftests: Link selftests directly with lib object files
KVM: selftests: Drop unnecessary rule for STATIC_LIBS
KVM: selftests: Add a helper to check EPT/VPID capabilities
KVM: selftests: Move VMX_EPT_VPID_CAP_AD_BITS to vmx.h
KVM: selftests: Refactor nested_map() to specify target level
KVM: selftests: Drop stale function parameter comment for nested_map()
KVM: selftests: Add option to create 2M and 1G EPT mappings
KVM: selftests: Replace x86_page_size with PG_LEVEL_XX
KVM: x86: SVM: fix nested PAUSE filtering when L0 intercepts PAUSE
KVM: x86: SVM: drop preempt-safe wrappers for avic_vcpu_load/put
KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blocking
KVM: x86: disable preemption while updating apicv inhibition
KVM: x86: SVM: fix avic_kick_target_vcpus_fast
KVM: x86: SVM: remove avic's broken code that updated APIC ID
KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base
KVM: x86: document AVIC/APICv inhibit reasons
KVM: x86/mmu: Set memory encryption "value", not "mask", in shadow PDPTRs
...
-----BEGIN PGP SIGNATURE-----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=1Lf0
-----END PGP SIGNATURE-----
Merge tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- A fix for a 5.19 regression for a case in which early device tree
initializes the RNG, which flips a static branch.
On most plaforms, jump labels aren't initialized until much later, so
this caused splats. On a few mailing list threads, we cooked up easy
fixes for arm64, arm32, and risc-v. But then things looked slightly
more involved for xtensa, powerpc, arc, and mips. And at that point,
when we're patching 7 architectures in a place before the console is
even available, it seems like the cost/risk just wasn't worth it.
So random.c works around it now by checking the already exported
`static_key_initialized` boolean, as though somebody already ran into
this issue in the past. I'm not super jazzed about that; it'd be
prettier to not have to complicate downstream code. But I suppose
it's practical.
- A few small code nits and adding a missing __init annotation.
- A change to the default config values to use the cpu and bootloader's
seeds for initializing the RNG earlier.
This brings them into line with what all the distros do (Fedora/RHEL,
Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void... at
least), and moreover will now give us test coverage in various test
beds that might have caught the above device tree bug earlier.
- A change to WireGuard CI's configuration to increase test coverage
around the RNG.
- A documentation comment fix to unrelated maintainerless CRC code that
I was asked to take, I guess because it has to do with polynomials
(which the RNG thankfully no longer uses).
* tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
wireguard: selftests: use maximum cpu features and allow rng seeding
random: remove rng_has_arch_random()
random: credit cpu and bootloader seeds by default
random: do not use jump labels before they are initialized
random: account for arch randomness in bits
random: mark bootloader randomness code as __init
random: avoid checking crng_ready() twice in random_init()
crc-itu-t: fix typo in CRC ITU-T polynomial comment
Add benchmark for hash_map to reproduce the worst case
that non-stop update when map's free is zero.
Just like this:
./run_bench_bpf_hashmap_full_update.sh
Setting up benchmark 'bpf-hashmap-ful-update'...
Benchmark 'bpf-hashmap-ful-update' started.
1:hash_map_full_perf 555830 events per sec
...
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Link: https://lore.kernel.org/r/20220610023308.93798-3-zhoufeng.zf@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a static assert to the KVM/VM/vCPU ioctl() helpers to verify that the
size of the argument provided matches the expected size of the IOCTL.
Because ioctl() ultimately takes a "void *", it's all too easy to pass in
garbage and not detect the error until runtime. E.g. while working on a
CPUID rework, selftests happily compiled when vcpu_set_cpuid()
unintentionally passed the cpuid() function as the parameter to ioctl()
(a local "cpuid" parameter was removed, but its use was not replaced with
"vcpu->cpuid" as intended).
Tweak a variety of benign issues that aren't compatible with the sanity
check, e.g. passing a non-pointer for ioctls().
Note, static_assert() requires a string on older versions of GCC. Feed
it an empty string to make the compiler happy.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the TAP-friendly ksft_exit_skip() instead of KVM's custom print_skip()
when skipping a test via __TEST_REQUIRE. KVM's "skipping test" has no
known benefit, whereas some setups rely on TAP output.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add TEST_REQUIRE() and __TEST_REQUIRE() to replace the myriad open coded
instances of selftests exiting with KSFT_SKIP after printing an
informational message. In addition to reducing the amount of boilerplate
code in selftests, the UPPERCASE macro names make it easier to visually
identify a test's requirements.
Convert usage that erroneously uses something other than print_skip()
and/or "exits" with '0' or some other non-KSFT_SKIP value.
Intentionally drop a kvm_vm_free() in aarch64/debug-exceptions.c as part
of the conversion. All memory and file descriptors are freed on process
exit, so the explicit free is superfluous.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kvm_has_cap() to wrap kvm_check_cap() and return a bool for the use
cases where the caller only wants check if a capability is supported,
i.e. doesn't care about the value beyond whether or not it's non-zero.
The "check" terminology is somewhat ambiguous as the non-boolean return
suggests that '0' might mean "success", i.e. suggests that the ioctl uses
the 0/-errno pattern. Provide a wrapper instead of trying to find a new
name for the raw helper; the "check" terminology is derived from the name
of the ioctl, so using e.g. "get" isn't a clear win.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return an 'unsigned int' instead of a signed 'int' from kvm_check_cap(),
to make it more obvious that kvm_check_cap() can never return a negative
value due to its assertion that the return is ">= 0".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove DEFAULT_GUEST_PHY_PAGES and open code the magic number (with a
comment) in vm_nr_pages_required(). Exposing DEFAULT_GUEST_PHY_PAGES to
tests was a symptom of the VM creation APIs not cleanly supporting tests
that create runnable vCPUs, but can't do so immediately. Now that tests
don't have to manually compute the amount of memory needed for basic
operation, make it harder for tests to do things that should be handled
by the framework, i.e. force developers to improve the framework instead
of hacking around flaws in individual tests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vm->max_gfn to compute the highest gpa in vmx_apic_access_test, and
blindly trust that the highest gfn/gpa will be well above the memory
carved out for memslot0. The existing check is beyond paranoid; KVM
doesn't support CPUs with host.MAXPHYADDR < 32, and the selftests are all
kinds of hosed if memslot0 overlaps the local xAPIC, which resides above
"lower" (below 4gb) DRAM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle all memslot0 size adjustments in __vm_create(). Currently, the
adjustments reside in __vm_create_with_vcpus(), which means tests that
call vm_create() or __vm_create() directly are left to their own devices.
Some tests just pass DEFAULT_GUEST_PHY_PAGES and don't bother with any
adjustments, while others mimic the per-vCPU calculations.
For vm_create(), and thus __vm_create(), take the number of vCPUs that
will be runnable to calculate that number of per-vCPU pages needed for
memslot0. To give readers a hint that neither vm_create() nor
__vm_create() create vCPUs, name the parameter @nr_runnable_vcpus instead
of @nr_vcpus. That also gives readers a hint as to why tests that create
larger numbers of vCPUs but never actually run those vCPUs can skip
straight to the vm_create_barebones() variant.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop @num_percpu_pages from __vm_create_with_vcpus(), all callers pass
'0' and there's unlikely to be a test that allocates just enough memory
that it needs a per-CPU allocation, but not so much that it won't just do
its own memory management.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All callers of __vm_create_with_vcpus() pass DEFAULT_GUEST_PHY_PAGES for
@slot_mem_pages; drop the param and just hardcode the "default" as the
base number of pages for slot0.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop a variety of 'struct kvm_vm' accessors that wrap a single variable
now that tests can simply reference the variable directly.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop vcpu_state() now that all tests reference vcpu->run directly.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop vcpu_get() and rename vcpu_find() to vcpu_exists() to make it that
much harder for a test to give meaning to a vCPU ID. I.e. force tests to
capture a vCPU when the vCPU is created.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take a vCPU directly instead of a VM+vcpu pair in all vCPU-scoped helpers
and ioctls.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Require the caller of __vm_create_with_vcpus() to provide a non-NULL
array of vCPUs now that all callers do so. It's extremely unlikely a
test will have a legitimate use case for creating a VM with vCPUs without
wanting to do something with those vCPUs, and if there is such a use case,
requiring that one-off test to provide a dummy array is a minor
annoyance.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Grab the vCPU from vm_vcpu_add() directly instead of doing vcpu_get()
after the fact. This will allow removing vcpu_get() entirely.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track vCPUs by their 'struct kvm_vcpu' object, and stop assuming that a
vCPU's ID is the same as its index when referencing a vCPU's metadata.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for taking a vCPU pointer in vCPU-scoped functions, grab
the vCPU(s) created by __vm_vcpu_add() and use the ID from the vCPU
object instead of hardcoding the ID in ioctl() invocations.
Rename init1/init2 => init0/init1 to avoid having odd/confusing code
where vcpu0 consumes init1 and vcpu1 consumes init2.
Note, this change could easily be done when the functions are converted
in the future, and/or the vcpu{0,1} vs. init{1,2} discrepancy could be
ignored, but then there would be no opportunity to poke fun at the
1-based counting scheme.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track the vCPU's 'struct kvm_vcpu' object in get-reg-list instead of
hardcoding '0' everywhere.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track vCPUs by their 'struct kvm_vcpu' object in kvm_binary_stats_test,
not by their ID. The per-vCPU helpers will soon take a vCPU instead of a
VM+vcpu_id pair.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reference vCPUs by their 'struct kvm_vcpu' object in kvm_page_table_test
instead of by their ID. This moves selftests one step closer towards
taking a 'struct kvm_vcpu *' instead of VM+vcpu_id for vCPU helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the @vcpuids parameter from VM creators now that there are no users.
Allowing tests to specify IDs was a gigantic mistake as it resulted in
tests with arbitrary and ultimately meaningless IDs that differed only
because the author used test X intead of test Y as the source for
copy+paste (the de facto standard way to create a KVM selftest).
Except for literally two tests, x86's set_boot_cpu_id and s390's resets,
tests do not and should not care about the vCPU ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop all vm_create_default*() helpers, the "default" naming turned out to
terrible as wasn't extensible (hard to have multiple defaults), was a lie
(half the settings were default, half weren't), and failed to capture
relationships between helpers, e.g. compared with the kernel's standard
underscores pattern.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vm_create_with_vcpus() in max_guest_memory_test and reference vCPUs
by their 'struct kvm_vcpu' object instead of their ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vm_create() instead of vm_create_default_with_vcpus() in
tsc_scaling_sync. The existing call doesn't create any vCPUs, and the
guest_code() entry point is set when vm_vcpu_add_default() is invoked.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tprot to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of passing around vCPU IDs. Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==1. The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage. If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert diag318_test_handler to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of passing around vCPU IDs. Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==6. The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage. If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass around a 'struct kvm_vcpu' object instead of a vCPU ID in s390's
memop test. Pass NULL for the vCPU instead of a magic '-1' ID to
indicate that an ioctl/test should be done at VM scope.
Rename "struct test_vcpu vcpu" to "struct test_info info" in order to
avoid naming collisions (this is the bulk of the diff :-( ).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass around a 'struct kvm_vcpu' object in the "resets" test instead of
referencing the vCPU by the global VCPU_ID. Rename the #define for the
vCPU's ID to ARBITRARY_NON_ZERO_VCPU_ID to make it more obvious that (a)
the value matters but (b) is otherwise arbitrary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert sync_regs_test to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of passing around vCPU IDs. Note, this
is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing
non-zero vCPU IDs is desirable for generic tests, that can be done in the
future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vm_create_with_one_vcpu to use vm_create_with_vcpus() and pass
around 'struct kvm_vcpu' objects instead of passing around vCPU IDs.
Don't bother with macros for the HALTER versus SENDER indices, the vast
majority of references don't differentiate between the vCPU roles, and
the code that does either has a comment or an explicit reference to the
role, e.g. to halter_guest_code() or sender_guest_code().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a combination of vm_create(), vm_create_with_vcpus(), and
vm_vcpu_add() to convert vgic_init from vm_create_default_with_vcpus(),
and away from referncing vCPUs by ID.
Thus continues the march toward total annihilation of "default" helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sync the next stage using the VM before said VM is potentially freed by
the TEST_STAGE_HVC_IFACE_FEAT_DISABLED stage.
Opportunistically take a double pointer in anticipation of also having to
set the new vCPU pointer once the test stops hardcoding '0' everywhere.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework vcpu_{g,s}et_reg() to provide the APIs that tests actually want to
use, and drop the three "one-off" implementations that cropped up due to
the poor API.
Ignore the handful of direct KVM_{G,S}ET_ONE_REG calls that don't fit the
APIs for one reason or another.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a combination of vm_create(), vm_create_with_vcpus(), and
vm_vcpu_add() to convert vgic_init from vm_create_default_with_vcpus(),
and away from referncing vCPUs by ID.
Thus continues the march toward total annihilation of "default" helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert triple_fault_event_test to use vm_create_with_one_vcpu() and pull
the vCPU's ID from 'struct kvm_vcpu'.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert svm_nested_soft_inject_test to use vm_create_with_one_vcpu() and
pull the vCPU's ID from 'struct kvm_vcpu'.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert arch_timer to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of requiring that the index into the
array of vCPUs for a given vCPU is also the ID of the vCPU
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert steal_time to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of requiring that the index into the
array of vCPUs for a given vCPU is also the ID of the vCPU.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a VM creator that "returns" the created vCPUs by filling the provided
array. This will allow converting multi-vCPU tests away from hardcoded
vCPU IDs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass around 'struct kvm_vcpu' objects in hardware_disable_test instead of
the VM+vcpu_id (called "index" by the test).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass around 'struct kvm_vcpu' objects in psci_test instead of relying on
global VCPU_IDs. Ideally, the test wouldn't have to manually create
vCPUs and thus care about vCPU IDs, but it's not the end of the world and
avoiding that behavior isn't guaranteed to be a net positive (an attempt
at macro shenanigans did not go very well).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework set_boot_cpu_id to pass around 'struct kvm_vcpu' objects instead
of relying on global VCPU_IDs. The test is still ugly, but that's
unavoidable since the point of the test is to verify that KVM correctly
assigns VCPU_ID==0 to be the BSP by default. This is literally one of
two KVM selftests that legitimately needs to care about the exact vCPU
IDs of the vCPUs it creates.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vm_vcpu_add() to __vm_vcpu_add(), and vm_vcpu_add_default() to
vm_vcpu_add() to show the relationship between the newly minted
vm_vcpu_add() and __vm_vcpu_add().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return the created 'struct kvm_vcpu' object from vm_vcpu_add_default(),
which cleans up a few tests and will eventually allow removing vcpu_get()
entirely.
Opportunistically rename @vcpuid to @vcpu_id to follow preferred kernel
style.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add "arch" into the name of utility functions that are declared in common
code, but (surprise!) have arch-specific implementations. Shuffle code
around so that all such helpers' declarations are bundled together.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An "unrestricted guest" is an VMX-only concept, move the relevant helper
to x86-64 code. Assume most readers can correctly convert underscores to
spaces and oppurtunistically trim the function comment.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the declaration of guest_get_vcpuid() to include/aarch64/processor.h,
it is implemented and used only by arm64.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vgic_irq to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of passing around a vCPU ID (which is
always the global VCPU_ID...).
Opportunstically align the indentation for multiple functions'
parameters.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert fix_hypercall_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert debug-exceptions to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert xapic_state_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of the raw vCPU ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track the added 'struct kvm_vcpu' object in tsc_scaling_sync instead of
relying purely on the VM + vcpu_id combination. Ideally, the test
wouldn't need to manually manage vCPUs, but the need to invoke a per-VM
ioctl before creating vCPUs is not handled by the selftests framework,
at least not yet...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert system_counter_offset_test to use vm_create_with_one_vcpu() and
pass around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert set_memory_region_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert dirty_log_test to pass around a 'struct kvm_vcpu' object instead
of using a global VCPU_ID. Note, this is a "functional" change in the
sense that the test now creates a vCPU with vcpu_id==0 instead of
vcpu_id==5. The non-zero VCPU_ID was 100% arbitrary and added little to
no validation coverage. If testing non-zero vCPU IDs is desirable for
generic tests, that can be done in the future by tweaking the VM creation
helpers.
The test still hardcodes usage of vcpu_id==0, but only for a few lines.
That wart will be removed in the not-too-distant future.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert xen_shinfo_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage. If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert xen_vmcall_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage. If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Opportunistically make the "vm" variable local, it is unused outside of
main().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_invalid_nested_guest_state to use vm_create_with_one_vcpu() and
pass around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert userspace_io_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID. Note,
this is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==1. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing non-zero
vCPU IDs is desirable for generic tests, that can be done in the future by
tweaking the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert cpuid_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunistically use vcpu_run() instead of _vcpu_run(), the test expects
KVM_RUN to succeed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert cr4_cpuid_sync_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID. Note,
this is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==1. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing non-zero
vCPU IDs is desirable for generic tests, that can be done in the future by
tweaking the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert amx_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.o
Opportunistically use vcpu_run() instead of _vcpu_run(), the test expects
KVM_RUN to succeed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace MOVE_RIP+SET_RIP with a proper helper, vcpu_skip_insn(), that is
more descriptive, doesn't subtly access local variables, and provides
type safety.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert debug_regs to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunstically drop the CLEAR_DEBUG/APPLY_DEBUG macros as they only
obfuscate the code, e.g. operating on local variables not "passed" to the
macro is all kinds of confusing.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert emulator_error_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID. Note,
this is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing non-zero
vCPU IDs is desirable for generic tests, that can be done in the future by
tweaking the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert evmcs_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage. If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run(), the test expects
KVM_RUN to succeed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert hyperv_clock to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert hyperv_features to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert hyperv_svm_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==1. The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage. If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run(), the test expects
KVM_RUN to succeed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert kvm_clock_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tsc_msrs_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_exception_with_invalid_guest_state to use
vm_create_with_one_vcpu() and pass around a 'struct kvm_vcpu' object
instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert userspace_msr_exit_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Note, this is a "functional" change in the sense that the test now
creates a vCPU with vcpu_id==0 instead of vcpu_id==1. The non-zero
VCPU_ID was 100% arbitrary and added little to no validation coverage.
If testing non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded. Fix minor coding style violations
too.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_apic_access_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunistically make the "vm" variable local, it is unused outside of
main().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_close_while_nested_test to use vm_create_with_one_vcpu() and
pass around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Note, this is a "functional" change in the sense that the test now
creates a vCPU with vcpu_id==0 instead of vcpu_id==5. The non-zero
VCPU_ID was 100% arbitrary and added little to no validation coverage.
If testing non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Opportunistically make the "vm" variable local, it is unused outside of
main().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_dirty_log_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Note, this is a "functional" change in the sense that the test now
creates a vCPU with vcpu_id==0 instead of vcpu_id==1. The non-zero
VCPU_ID was 100% arbitrary and added little to no validation coverage.
If testing non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert set_sregs_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this
is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing
non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_nested_tsc_scaling_test to use vm_create_with_one_vcpu() and
pass around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert platform_info_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert kvm_pv_test to use vm_create_with_one_vcpu() and pass arounda
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunistically use vcpu_run() instead of _vcpu_run() with an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert hyperv_cpuid to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert sync_regs_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this
is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing
non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert svm_vmcall_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this
is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==5. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing
non-zero vCPU IDs is desirable for generic tests, that can be done in the
future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert svm_int_ctl_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Opportunistically make the "vm" variable a local function variable, there
are no users outside of main().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert state_test to use vm_create_with_one_vcpu() and
vm_recreate_with_one_vcpu(), and pass around a 'struct kvm_vcpu' object
instead of using a global VCPU_ID. Note, this is a "functional" change
in the sense that the test now creates a vCPU with vcpu_id==0 instead of
vcpu_id==5. The non-zero VCPU_ID was 100% arbitrary and added little to
no validation coverage. If testing non-zero vCPU IDs is desirable for
generic tests, that can be done in the future by tweaking the VM creation
helpers.
Opportunistically use vcpu_run() instead of _vcpu_run(), the test expects
KVM_RUN to succeed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert smm_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this
is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==1. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing
non-zero vCPU IDs is desirable for generic tests, that can be done in the
future by tweaking the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run(), the test expects
KVM_RUN to succeed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert pmu_event_filter_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Rename run_vm_to_sync() to run_vcpu_to_sync() accordingly.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert mmu_role_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Note, this is a "functional" change in the sense that the test now
creates a vCPU with vcpu_id==0 instead of vcpu_id==1. The non-zero
VCPU_ID was 100% arbitrary and added little to no validation coverage.
If testing non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run() plus an open
coded assert that KVM_RUN succeeded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_tsc_adjust_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Note, this is a "functional" change in the sense that the test now
creates a vCPU with vcpu_id==0 instead of vcpu_id==5. The non-zero
VCPU_ID was 100% arbitrary and added little to no validation coverage.
If testing non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_set_nested_state_test to use vm_create_with_one_vcpu() and
pass around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Note, this is a "functional" change in the sense that the test now
creates a vCPU with vcpu_id==0 instead of vcpu_id==5. The non-zero
VCPU_ID was 100% arbitrary and added little to no validation coverage.
If testing non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_pmu_msrs_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert vmx_preemption_timer_test to use vm_create_with_one_vcpu() and
pass around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Note, this is a "functional" change in the sense that the test now
creates a vCPU with vcpu_id==0 instead of vcpu_id==5. The non-zero
VCPU_ID was 100% arbitrary and added little to no validation coverage.
If testing non-zero vCPU IDs is desirable for generic tests, that can be
done in the future by tweaking the VM creation helpers.
Opportunistically use vcpu_run() instead of _vcpu_run(), the test expects
KVM_RUN to succeed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert xss_msr_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID. Note, this
is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==1. The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage. If testing
non-zero vCPU IDs is desirable for generic tests, that can be done in the
future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert rseq_test to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert memslot_perf_test to use __vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
This is the first of many, many steps towards eliminating VCPU_ID from
all KVM selftests, and towards eventually purging the VM+vcpu_id mess.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return the created vCPU from vm_vcpu_add() so that callers don't need to
manually retrieve the vCPU that was just added. Opportunistically drop
the "heavy" function comment, it adds a lot of lines of "code" but not
much value, e.g. it's pretty obvious that @vm is a virtual machine...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename 'struct vcpu' to 'struct kvm_vcpu' to align with 'struct kvm_vm'
in the selftest, and to give readers a hint that the struct is specific
to KVM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the "state" field of 'struct vcpu' to "run". KVM calls it "run",
the struct name is "kvm_run", etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename xapic_state_test's kvm_vcpu struct to xapic_vcpu to avoid a
collision when the common 'struct vcpu' is renamed to 'struct kvm_vcpu'
in a future patch.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add ____vm_create() to be the innermost helper, and turn vm_create() into
a wrapper the specifies VM_MODE_DEFAULT. Most of the vm_create() callers
just want the default mode, or more accurately, don't care about the mode.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vm_create_without_vcpus() to vm_create() so that it's not
misconstrued as helper that creates a VM that can never have vCPUs, as
opposed to a helper that "just" creates a VM without vCPUs added at time
zero.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vm_create() to vm_create_barebones() and drop the @phys_pages
param. Pass '0' for the number of pages even though some callers pass
'DEFAULT_GUEST_PHY_PAGES', as the intent behind creating truly barebones
VMs is purely to create a VM, i.e. there aren't vCPUs, there's no guest
code loaded, etc..., and so there is nothing that will ever need or
consume guest memory.
Freeing up the name vm_create() will allow using the name for an inner
helper to the other VM creators, which need a "full" VM.
Opportunisticaly rewrite the function comment for addr_gpa2alias() to
focus on what the _function_ does, not what its _sole caller_ does.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Open code adding and doing setup for a vCPU in get-reg-list in order to
avoid the stack allocation that comes with aarch64_vcpu_add_default().
get-reg-list doesn't need to run the vCPU, and so doesn't need the guest
to be backed with memory. This will allow future cleanup to turn what is
current vm_create() into a barebones helper.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vm_create_without_vcpus() instead of open coding a rough equivalent
in psci_test.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vm_create_without_vcpus() instead of open coding a rough equivalent
in hardware_disable_test.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vm_create_without_vcpus() instead of open coding a rough equivalent.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vm_create_without_vcpus() in set_boot_cpu_id instead of open coding
the equivlant now that the "without_vcpus" variant does
vm_adjust_num_guest_pages().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the call to vm_adjust_num_guest_pages() from vm_create_with_vcpus()
down into vm_create_without_vcpus(). This will allow a future patch to
make the "w/o vCPUs" variant the common inner helper, e.g. so that the
"with_vcpus" helper calls the "without_vcpus" helper, instead of having
them be separate paths.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add VM creation helpers to expose/return 'struct vcpu' so that tests
don't have to hardcode a VCPU_ID or make assumptions about what vCPU ID
is used by the framework just to retrieve a vCPU the test created.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers for the various one-off helpers used by x86's vCPU state
save/restore helpers, and convert the other open coded ioctl()s to use
existing helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the get/set part of the MP_STATE and GUEST_DEBUG helpers to the end
to align with the many other ioctl() wrappers/helpers. Note, this is not
an endorsement of the predominant style, the goal is purely to provide
consistency in the selftests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Consolidate the helper for retrieving the list of save/restore MSRs and
the list of feature MSRs, and use the common helpers in the related
get_msr_index_features test. Switching to the common helpers eliminates
the testcase that KVM returns the same -E2BIG result if the input number
of MSRs is '1' versus '0', but considered that testcase isn't very
interesting, e.g. '0' and '1' are equally arbitrary, and certainly not
worth the additional code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Assert that KVM_SET_MSRS returns '0' or '1' when setting XSS to a
non-zero value. The ioctl() itself should "succeed", its only the
setting of the XSS MSR that should fail/fault.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cache the list of MSRs to save restore, mostly to justify not freeing the
list in the caller, which simplifies consumption of the list.
Opportunistically move the XSS test's so called is_supported_msr() to
common code as kvm_msr_is_in_save_restore_list(). The XSS is "supported"
by KVM, it's simply not in the save/restore list because KVM doesn't yet
allow a non-zero value.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework the KVM_ENABLE_CAP helpers to take the cap and arg0; literally
every current user, and likely every future user, wants to set 0 or 1
arguments and nothing else.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add __vm_enable_cap() and use it for negative tests that expect
KVM_ENABLE_CAP to fail. Opportunistically clean up the MAX_VCPU_ID test
error messages.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a backpointer to 'struct vcpu' so that tests can get at the owning
VM when passing around a vCPU object. Long term, this will be little
more than a nice-to-have feature, but in the short term it is a critical
step toward purging the VM+vcpu_id ioctl mess without introducing even
more churn.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the asserts for the many REDIST_REGS accesses into common helpers
instead of copy+pasting the same, unhelpful asserts over and over. Not
providing the actual (or expected) value makes it unnecessarily painful
to debug failures, especially since test_assert() prints the errno
unconditionally, e.g. on success, it may print a stale, misleading errno.
Use kvm_device_attr_get() to handle the "success" check so that the
"success" and "expected == actual" asserts are separated, which will make
it far less likely that a user incorrectly assumes the ioctl() failed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split the get/set device_attr helpers instead of using a boolean param to
select between get and set. Duplicating upper level wrappers is a very,
very small price to pay for improved readability, and having constant (at
compile time) inputs will allow the selftests framework to sanity check
ioctl() invocations.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop 'int' returns from *_device_has_attr() helpers that assert the
return is '0', there's no point in returning '0' and "requiring" the
caller to perform a redundant assertion.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_device_check_attr() and its variants to kvm_has_device_attr()
to be consistent with the ioctl names and with other helpers in the KVM
selftests framework.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Multiplex the return value and fd (on success) in __kvm_create_device()
to mimic common library helpers that return file descriptors, e.g. open().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move KVM_CREATE_DEVICE_TEST to its own helper, identifying "real" versus
"test" device creation based on a hardcoded boolean buried in the middle
of a param list is painful for readers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the two calls that pass @test=true to kvm_create_device() and drop
the @test param entirely. The two removed calls don't check the return
value of kvm_create_device(), so other than verifying KVM doesn't explode,
which is extremely unlikely given that the non-test variant was _just_
called, they are pointless and provide no validation coverage.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the KVM_IOCTL_ERROR() macro to generate error messages for a handful
of one-off arm64 ioctls. The calls in question are made without an
associated struct kvm_vm/kvm_vcpu as they are used to configure those
structs, i.e. can't be easily converted to e.g. vcpu_ioctl().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold kvm_util_internal.h into kvm_util_base.h, i.e. make all KVM utility
stuff "public". Hiding struct implementations from tests has been a
massive failure, as it has led to pointless and poorly named wrappers,
unnecessarily opaque code, etc...
Not to mention that the approach was a complete failure as evidenced by
the non-zero number of tests that were including kvm_util_internal.h.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make regs_dump() and sregs_dump() static, they're only implemented by
x86 and only used internally.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use __KVM_SYSCALL_ERROR() to report and pretty print non-KVM syscall and
ioctl errors, e.g. for mmap(), munmap(), uffd ioctls, etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced KVM-specific ioctl() helpers instead of open
coding calls to ioctl() just to pretty print the ioctl name.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make kvm_ioctl() a macro wrapper and print the _name_ of the ioctl on
failure instead of the number.
Deliberately do not use __stringify(), as that will expand the ioctl all
the way down to its numerical sequence, again the intent is to print the
name of the macro.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced VM-specific ioctl() helpers instead of open
coding calls to ioctl() just to pretty print the ioctl name. Keep a few
open coded assertions that provide additional info.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make vm_ioctl() a macro wrapper and print the _name_ of the ioctl on
failure instead of the number.
Deliberately do not use __stringify(), as that will expand the ioctl all
the way down to its numerical sequence. Again the intent is to print the
name of the macro.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add vcpu_get() to wrap vcpu_find() and deduplicate a pile of code that
asserts the requested vCPU exists.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop vcpu_get_fd(), it no longer has any users, and really should not
exist as the framework has failed if tests need to manually operate on
a vCPU fd.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vcpu_access_device_attr() in arm's arch_timer test instead of
manually retrieving the vCPU's fd. This will allow dropping vcpu_get_fd()
in a future patch.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add __vcpu_run() so that tests that want to avoid asserts on KVM_RUN
failures don't need to open code the ioctl() call.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced vCPU-specific ioctl() helpers instead of
open coding calls to ioctl() just to pretty print the ioctl name.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split vcpu_nested_state_set() into a wrapper that asserts, and an inner
helper that does not. Passing a bool is all kinds of awful as it's
unintuitive for readers and requires returning an 'int' from a function
that for most users can never return anything other than "success".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop @mode from vm_create() and have it use VM_MODE_DEFAULT. Add and use
an inner helper, __vm_create(), to service the handful of tests that want
something other than VM_MODE_DEFAULT.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make vcpu_ioctl() a macro wrapper and pretty the _name_ of the ioctl on
failure instead of the number. Add inner macros to allow handling cases
where the name of the ioctl needs to be resolved higher up the stack, and
to allow using the formatting for non-ioctl syscalls without being
technically wrong.
Deliberately do not use __stringify(), as that will expand the ioctl all
the way down to its numerical sequence, again the intent is to print the
name of the macro.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a second underscore to inner ioctl() helpers to better align with
commonly accepted kernel coding style, and to allow using a single
underscore variant in the future for macro shenanigans.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the @perm param from vm_create() and always open VM file descriptors
with O_RDWR. There's no legitimate use case for other permissions, and
if a selftest wants to do oddball negative testing it can open code the
necessary bits instead of forcing a bunch of tests to provide useless
information.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop declarations for allocate_kvm_dirty_log() and vm_create_device(),
which no longer have implementations.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When iterating over vCPUs, invoke access_v3_redist_reg() on the "current"
vCPU instead of vCPU0, which is presumably what was intended by iterating
over all vCPUs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update 'ret' with the return value of _kvm_device_access() prior to
asserting that ret is non-zero. In the current code base, the flaw is
benign as 'ret' is guaranteed to be -EBUSY from the previous run_vcpu(),
which also means that errno==EBUSY prior to _kvm_device_access(), thus
the "errno == EFAULT" part of the assert means that a false negative is
impossible (unless the kernel is being truly mean and spuriously setting
errno=EFAULT while returning success).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The x86-only KVM_CAP_TRIPLE_FAULT_EVENT was (appropriately) renamed to
KVM_CAP_X86_TRIPLE_FAULT_EVENT when the patches were applied, but the
docs and selftests got left behind. Fix them.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By forcing the maximum CPU that QEMU has available, we expose additional
capabilities, such as the RNDR instruction, which increases test
coverage. This then allows the CI to skip the fake seeding step in some
cases. Also enable STRICT_KERNEL_RWX to catch issues related to early
jump labels when the RNG is initialized at boot.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to show tests
x86:
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Rewrite gfn-pfn cache refresh
* Refuse starting the module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit
The selftests nested code only supports 4-level paging at the moment.
This means it cannot map nested guest physical addresses with more than
48 bits. Allow perf_test_util nested mode to work on hosts with more
than 48 physical addresses by restricting the guest test region to
48-bits.
While here, opportunistically fix an off-by-one error when dealing with
vm_get_max_gfn(). perf_test_util.c was treating this as the maximum
number of GFNs, rather than the maximum allowed GFN. This didn't result
in any correctness issues, but it did end up shifting the test region
down slightly when using huge pages.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-12-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an option to dirty_log_perf_test that configures the vCPUs to run in
L2 instead of L1. This makes it possible to benchmark the dirty logging
performance of nested virtualization, which is particularly interesting
because KVM must shadow L1's EPT/NPT tables.
For now this support only works on x86_64 CPUs with VMX. Otherwise
passing -n results in the test being skipped.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-11-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Break up the long lines for LIBKVM and alphabetize each architecture.
This makes reading the Makefile easier, and will make reading diffs to
LIBKVM easier.
No functional change intended.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-10-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The linker does obey strong/weak symbols when linking static libraries,
it simply resolves an undefined symbol to the first-encountered symbol.
This means that defining __weak arch-generic functions and then defining
arch-specific strong functions to override them in libkvm will not
always work.
More specifically, if we have:
lib/generic.c:
void __weak foo(void)
{
pr_info("weak\n");
}
void bar(void)
{
foo();
}
lib/x86_64/arch.c:
void foo(void)
{
pr_info("strong\n");
}
And a selftest that calls bar(), it will print "weak". Now if you make
generic.o explicitly depend on arch.o (e.g. add function to arch.c that
is called directly from generic.c) it will print "strong". In other
words, it seems that the linker is free to throw out arch.o when linking
because generic.o does not explicitly depend on it, which causes the
linker to lose the strong symbol.
One solution is to link libkvm.a with --whole-archive so that the linker
doesn't throw away object files it thinks are unnecessary. However that
is a bit difficult to plumb since we are using the common selftests
makefile rules. An easier solution is to drop libkvm.a just link
selftests with all the .o files that were originally in libkvm.a.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-9-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "all: $(STATIC_LIBS)" rule. The KVM selftests already depend
on $(STATIC_LIBS), so there is no reason to have an extra "all" rule.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-8-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create a small helper function to check if a given EPT/VPID capability
is supported. This will be re-used in a follow-up commit to check for 1G
page support.
No functional change intended.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-7-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a VMX-related macro so move it to vmx.h. While here, open code
the mask like the rest of the VMX bitmask macros.
No functional change intended.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-6-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor nested_map() to specify that it explicityl wants 4K mappings
(the existing behavior) and push the implementation down into
__nested_map(), which can be used in subsequent commits to create huge
page mappings.
No function change intended.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-5-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nested_map() does not take a parameter named eptp_memslot. Drop the
comment referring to it.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current EPT mapping code in the selftests only supports mapping 4K
pages. This commit extends that support with an option to map at 2M or
1G. This will be used in a future commit to create large page mappings
to test eager page splitting.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86_page_size is an enum used to communicate the desired page size with
which to map a range of memory. Under the hood they just encode the
desired level at which to map the page. This ends up being clunky in a
few ways:
- The name suggests it encodes the size of the page rather than the
level.
- In other places in x86_64/processor.c we just use a raw int to encode
the level.
Simplify this by adopting the kernel style of PG_LEVEL_XX enums and pass
around raw ints when referring to the level. This makes the code easier
to understand since these macros are very common in KVM MMU code.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220520233249.3776001-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf 2022-06-09
We've added 6 non-merge commits during the last 2 day(s) which contain
a total of 8 files changed, 49 insertions(+), 15 deletions(-).
The main changes are:
1) Fix an illegal copy_to_user() attempt seen by syzkaller through arm64
BPF JIT compiler, from Eric Dumazet.
2) Fix calling global functions from BPF_PROG_TYPE_EXT programs by using
the correct program context type, from Toke Høiland-Jørgensen.
3) Fix XSK TX batching invalid descriptor handling, from Maciej Fijalkowski.
4) Fix potential integer overflows in multi-kprobe link code by using safer
kvmalloc_array() allocation helpers, from Dan Carpenter.
5) Add Quentin as bpftool maintainer, from Quentin Monnet.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
MAINTAINERS: Add a maintainer for bpftool
xsk: Fix handling of invalid descriptors in XSK TX batching API
selftests/bpf: Add selftest for calling global functions from freplace
bpf: Fix calling global functions from BPF_PROG_TYPE_EXT programs
bpf: Use safer kvmalloc_array() where possible
bpf, arm64: Clear prog->jited_len along prog->jited
====================
Link: https://lore.kernel.org/r/20220608234133.32265-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Fix TDP MMU performance issue with disabling dirty logging
* Fix 5.14 regression with SVM TSC scaling
* Fix indefinite stall on applying live patches
* Fix unstable selftest
* Fix memory leak from wrong copy-and-paste
* Fix missed PV TLB flush when racing with emulation
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKglysUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOJDAgArpPcAnJbeT2VQTQcp94e4tp9k1Sf
gmUewajco4zFVB/sldE0fIporETkaX+FYYPiaNDdNgJ2lUw/HUJBN7KoFEYTZ37N
Xx/qXiIXQYFw1bmxTnacLzIQtD3luMCzOs/6/Q7CAFZIBpUtUEjkMlQOBuxoKeG0
B0iLCTJSw0taWcN170aN8G6T+5+bdR3AJW1k2wkgfESfYF9NfJoTUHQj9WTMzM2R
aBRuXvUI/rWKvQY3DfoRmgg9Ig/SirSC+abbKIs4H08vZIEUlPk3WOZSKpsN/Wzh
3XDnVRxgnaRLx6NI/ouI2UYJCmjPKbNcueGCf5IfUcHvngHjAEG/xxe4Qw==
=zQ9u
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
- syzkaller NULL pointer dereference
- TDP MMU performance issue with disabling dirty logging
- 5.14 regression with SVM TSC scaling
- indefinite stall on applying live patches
- unstable selftest
- memory leak from wrong copy-and-paste
- missed PV TLB flush when racing with emulation
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: do not report a vCPU as preempted outside instruction boundaries
KVM: x86: do not set st->preempted when going back to user space
KVM: SVM: fix tsc scaling cache logic
KVM: selftests: Make hyperv_clock selftest more stable
KVM: x86/MMU: Zap non-leaf SPTEs when disabling dirty logging
x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm()
KVM: x86/mmu: Check every prev_roots in __kvm_mmu_free_obsolete_roots()
entry/kvm: Exit to user mode when TIF_NOTIFY_SIGNAL is set
KVM: Don't null dereference ops->destroy
Add a selftest for triple fault event:
- launch the L2 and exit to userspace via I/O.
- using KVM_SET_VCPU_EVENTS to pend a triple fault event.
- with the immediate_exit, check the triple fault is pending.
- run for real with pending triple fault and L1 can see the triple
fault.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20220524135624.22988-3-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the following coccicheck warnings:
tools/testing/selftests/kvm/lib/s390x/ucall.c:25:15-17: WARNING
opportunity for min()
tools/testing/selftests/kvm/lib/x86_64/ucall.c:27:15-17: WARNING
opportunity for min()
tools/testing/selftests/kvm/lib/riscv/ucall.c:56:15-17: WARNING
opportunity for min()
tools/testing/selftests/kvm/lib/aarch64/ucall.c:82:15-17: WARNING
opportunity for min()
tools/testing/selftests/kvm/lib/aarch64/ucall.c:55:20-21: WARNING
opportunity for min()
min() is defined in tools/include/linux/kernel.h.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20220511120621.36956-1-guozhengkui@vivo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Basic test coverage of KVM_CAP_MAX_VCPU_ID cap.
This capability can be enabled before vCPU creation and only allowed
to set once. if assigned vcpu id is beyond KVM_CAP_MAX_VCPU_ID
capability, vCPU creation will fail.
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220422134456.26655-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a KVM self-test that checks whether a nSVM L1 is able to successfully
inject a software interrupt, a soft exception and a NMI into its L2 guest.
In practice, this tests both the next_rip field consistency and
L1-injected event with intervening L0 VMEXIT during its delivery:
the first nested VMRUN (that's also trying to inject a software interrupt)
will immediately trigger a L0 NPF.
This L0 NPF will have zero in its CPU-returned next_rip field, which if
incorrectly reused by KVM will trigger a #PF when trying to return to
such address 0 from the interrupt handler.
For NMI injection this tests whether the L1 NMI state isn't getting
incorrectly mixed with the L2 NMI state if a L1 -> L2 NMI needs to be
re-injected.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
[sean: check exact L2 RIP on first soft interrupt]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <d5f3d56528558ad8e28a9f1e1e4187f5a1e6770a.1651440202.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix NAT support for NFPROTO_INET without layer 3 address,
from Florian Westphal.
2) Use kfree_rcu(ptr, rcu) variant in nf_tables clean_net path.
3) Use list to collect flowtable hooks to be deleted.
4) Initialize list of hook field in flowtable transaction.
5) Release hooks on error for flowtable updates.
6) Memleak in hardware offload rule commit and abort paths.
7) Early bail out in case device does not support for hardware offload.
This adds a new interface to net/core/flow_offload.c to check if the
flow indirect block list is empty.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: bail out early if hardware offload is not supported
netfilter: nf_tables: memleak flow rule from commit path
netfilter: nf_tables: release new hooks on unsupported flowtable flags
netfilter: nf_tables: always initialize flowtable hook list in transaction
netfilter: nf_tables: delete flowtable hooks via transaction list
netfilter: nf_tables: use kfree_rcu(ptr, rcu) to release hooks in clean_net path
netfilter: nat: really support inet nat without l3 address
====================
Link: https://lore.kernel.org/r/20220606212055.98300-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest that calls a global function with a context object parameter
from an freplace function to check that the program context type is
correctly converted to the freplace target when fetching the context type
from the kernel BTF.
v2:
- Trim includes
- Get rid of global function
- Use __noinline
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220606075253.28422-2-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test for enum64 value relocations.
The test will be skipped if clang version is 14 or lower
since enum64 is only supported from version 15.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062718.3726307-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a few unit tests for BTF_KIND_ENUM64 deduplication.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062713.3725409-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests to use the new enum kflag and enum64 API functions
in selftest btf_write.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062703.3724287-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The kflag is supported now for BTF_KIND_ENUM.
So remove the test which tests verifier failure
due to existence of kflag.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062657.3723737-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to show tests
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+SKTgaM0CPnbq/vKEXu8gLWmHHwFAmKXf2wACgkQEXu8gLWm
HHzu1Q//WjEuOX5nBjklMUlDB2oB2+vFSyW9lE7x9m38EnFTH8QTfH695ChVoNN+
j06Fhd4ENjxqTTYs7z67tP4TSQ/LhB/GsPydKCEOnB/63+k2cnYeS3wsv19213F0
IyvpN6MkzxoktV4m1EtKhlvXGpEBoXZCczgBLj3FYlNQ7kO8RsSkF9rOnhuP9Yjh
l2876bWHWlbU0qWmRSAu0spkwHWjtyh/bnQKzXotQyrQ9bo1yMQvhe2HH8HVTSio
cjRlseWVi01rJKzKcs6D7MFMctLKr5y0onxBgGJnRh27KoBY195ICH2Jz2LfJoor
EP57YcXZqfxzKCGHTGgVYMgFeixX6nzBgqTpDIHMQzvoM1IrQKl+d5riepO03xpS
gZxHtJqZi8s+t8w0ZFBHj83VXkzFyLuCIeui9vo3cQ00K7bBrNUSw1BAdqT5HTzW
K2R4jSQaszjw8mDz3R3G1+yg6PjMS6cDEU1+G2Id7xSYTV3lJnBDVzas7aEUNCC4
LzIrD5c4dscyZzIjAp9huVwpZoCNLy6jtecRTaGhA2YiE0VMWtJlMJHwbShlSnM7
5VhEn859namvoYtN8XBaTFa/jRDOxO+LHWuOy172oaBUgaVHBjZQLyrlit1FRQvT
SVruCmgtJ7u7RD/8uVDfPNR05DTSWQYzklJoKx2avKZj5FIx7ms=
=/6Ue
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: pvdump and selftest improvements
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to show tests
hyperv_clock doesn't always give a stable test result, especially with
AMD CPUs. The test compares Hyper-V MSR clocksource (acquired either
with rdmsr() from within the guest or KVM_GET_MSRS from the host)
against rdtsc(). To increase the accuracy, increase the measured delay
(done with nop loop) by two orders of magnitude and take the mean rdtsc()
value before and after rdmsr()/KVM_GET_MSRS.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220601144322.1968742-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
bpf_helpers.h has been moved to tools/lib/bpf since 5.10, so add more
including path.
Fixes: edae34a3ed ("selftests net: add UDP GRO fraglist + bpf self-tests")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220606064517.8175-1-lina.wang@mediatek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As subject, we only test SKB mode for xdping at present.
Now add DRV mode for xdping.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220602032507.464453-1-liuhangbin@gmail.com
tc_redirect_dtime was reported flaky from time to time. It
always fails at the udp test and complains about the bpf@tc-ingress
got a skb->tstamp when handling udp packet. It is unexpected
because the skb->tstamp should have been cleared when crossing
different netns.
The most likely cause is that the skb is actually a tcp packet
from the earlier tcp test. It could be the final TCP_FIN handling.
This patch tightens the skb->tstamp check in the bpf prog. It ensures
the skb is the current testing traffic. First, it checks that skb
matches the IPPROTO of the running test (i.e. tcp vs udp).
Second, it checks the server port (dst_ns_port). The server
port is unique for each test (50000 + test_enum).
Also fixed a typo in test_udp_dtime(): s/P100/P101/
Fixes: c803475fd8 ("bpf: selftests: test skb->tstamp in redirect_neigh")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220601234050.2572671-1-kafai@fb.com
- Initialise jump labels before setup_machine_fdt(), needed by commit
f5bda35fba ("random: use static branch for crng_ready()").
- Sparse warnings: missing prototype, incorrect __user annotation.
- Skip SVE kselftest if not sufficient vector lengths supported.
-----BEGIN PGP SIGNATURE-----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=25eW
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Most of issues addressed were introduced during this merging window.
- Initialise jump labels before setup_machine_fdt(), needed by commit
f5bda35fba ("random: use static branch for crng_ready()").
- Sparse warnings: missing prototype, incorrect __user annotation.
- Skip SVE kselftest if not sufficient vector lengths supported"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kselftest/arm64: signal: Skip SVE signal test if not enough VLs supported
arm64: Initialize jump labels before setup_machine_fdt()
arm64: hibernate: Fix syntax errors in comments
arm64: Remove the __user annotation for the restore_za_context() argument
ftrace/fgraph: fix increased missing-prototypes warnings
Here is the set of driver core changes for 5.19-rc1.
Note, I'm not really happy with this pull request as-is, see below for
details, but overall this is all good for everything but a small set of
systems, which we have a fix for already.
Lots of tiny driver core changes and cleanups happened this cycle,
but the two major things were:
- firmware_loader reorganization and additions including the
ability to have XZ compressed firmware images and the ability
for userspace to initiate the firmware load when it needs to,
instead of being always initiated by the kernel. FPGA devices
specifically want this ability to have their firmware changed
over the lifetime of the system boot, and this allows them to
work without having to come up with yet-another-custom-uapi
interface for loading firmware for them.
- physical location support added to sysfs so that devices that
know this information, can tell userspace where they are
located in a common way. Some ACPI devices already support
this today, and more bus types should support this in the
future.
Smaller changes included:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten any
linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request if you want to take them directly, _OR_ I can just revert
the probe timeout changes and they can wait for the next -rc1 merge
cycle. Given that the fixes are tested, and pretty simple, I'm leaning
toward that choice. Sorry this all came at the end of the merge window,
I should have resolved this all 2 weeks ago, that's my fault as it was
in the middle of some travel for me.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time outs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnv/A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/fACgvmenbo5HipqyHnOmTQlT50xQ9EYAn2eTq6ai
GkjLXBGNWOPBa5cU52qf
=yEi/
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
Here is the large set of char, misc, and other driver subsystem updates
for 5.19-rc1. The merge request for this has been delayed as I wanted
to get lots of linux-next testing due to some late arrivals of changes
for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers
and cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that
below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no reported
problems.
Note, there are 3 merge conflicts when merging this with your tree:
- MAINTAINERS, should be easy to resolve
- drivers/slimbus/qcom-ctrl.c, should be straightforward
resolution
- drivers/misc/lkdtm/stackleak.c, not an easy resolution. This
has been noted in the linux-next tree for a while, and
resolved there, here's a link to the resolution that Stephen
came up with and that Kees says is correct:
https://lore.kernel.org/r/20220509185344.3fe1a354@canb.auug.org.au
I will be glad to provide a merge point that contains these resolutions
if that makes things any easier for you.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnkbA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylOrgCggbbAFwESBY9o2YfpG+2VOLpc0GAAoJgY1XN8
P/gumbLEpFvoBZ5xLIW8
=KCgk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
A collection of small fixes for 5.19 merge window. Nothing particular
stands out, as most changes are device-specific fixes and quirks.
-----BEGIN PGP SIGNATURE-----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=SGqO
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 5.19 merge window. Nothing particular
stands out, as most changes are device-specific fixes and quirks"
* tag 'sound-fix-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
selftests: alsa: Handle pkg-config failure more gracefully
ALSA: usb-audio: Optimize TEAC clock quirk
ASoC: da7219: cancel AAD related work earlier for jack removal
ASoC: da7219: Fix pole orientation detection on certain headsets
ASoC: Intel: avs: Fix build error on arc, m68k and sparc
ALSA: hda/realtek - Fix microphone noise on ASUS TUF B550M-PLUS
ALSA: hda/via: Delete does not require return
ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9520 laptop
ASoC: Intel: common: fix typo for tplg naming
ALSA: usb-audio: Cancel pending work at closing a MIDI substream
ALSA: usb-audio: Add mixer mapping for Gigabyte B450/550 Mobos
ASoC: rt5640: Do not manipulate pin "Platform Clock" if the "Platform Clock" is not in the DAPM
ASoC: SOF: amd: Fixed Build error
ASoC: fsl_sai: Fix FSL_SAI_xDR/xFR definition
ASoC: soc-pcm: fix BE transition for TRIGGER_START
In the commit da00d2f117 ("bpf: Add test ops for BPF_PROG_TYPE_TRACING"),
the bpf_fentry_test1 function was moved into bpf_prog_test_run_tracing(),
which is the test_run function of the tracing BPF programs.
Thus calling 'bpf_prog_test_run_opts(filter_fd, &topts)' will not trigger
bpf_fentry_test1 function as filter_fd is a sk_filter BPF program.
Fix it by replacing filter_fd with fexit_fd in the bpf_prog_test_run_opts()
function.
Fixes: da00d2f117 ("bpf: Add test ops for BPF_PROG_TYPE_TRACING")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220521151329.648013-1-ytcoode@gmail.com
This change adds a test for libbpf_bpf_link_type_str. The test retrieves
all variants of the bpf_link_type enumeration using BTF and makes sure
that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-12-deso@posteo.net
This change switches bpftool over to using the recently introduced
libbpf_bpf_attach_type_str function instead of maintaining its own
string representation for the bpf_attach_type enum.
Note that contrary to other enum types, the variant names that bpftool
maps bpf_attach_type to do not adhere a simple to follow rule. With
bpf_prog_type, for example, the textual representation can easily be
inferred by stripping the BPF_PROG_TYPE_ prefix and lowercasing the
remaining string. bpf_attach_type violates this rule for various
variants.
We decided to fix up this deficiency with this change, meaning that
bpftool uses the same textual representations as libbpf. Supporting
tests, completion scripts, and man pages have been adjusted accordingly.
However, we did add support for accepting (the now undocumented)
original attach type names when they are provided by users.
For the test (test_bpftool_synctypes.py), I have removed the enum
representation checks, because we no longer mirror the various enum
variant names in bpftool source code. For the man page, help text, and
completion script checks we are now using enum definitions from
uapi/linux/bpf.h as the source of truth directly.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-10-deso@posteo.net
This change adds a test for libbpf_bpf_attach_type_str. The test
retrieves all variants of the bpf_attach_type enumeration using BTF and
makes sure that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-9-deso@posteo.net
This change switches bpftool over to using the recently introduced
libbpf_bpf_map_type_str function instead of maintaining its own string
representation for the bpf_map_type enum.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-7-deso@posteo.net
This change adds a test for libbpf_bpf_map_type_str. The test retrieves
all variants of the bpf_map_type enumeration using BTF and makes sure
that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-6-deso@posteo.net
This change switches bpftool over to using the recently introduced
libbpf_bpf_prog_type_str function instead of maintaining its own string
representation for the bpf_prog_type enum.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-4-deso@posteo.net
This change adds a test for libbpf_bpf_prog_type_str. The test retrieves
all variants of the bpf_prog_type enumeration using BTF and makes sure
that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-3-deso@posteo.net
Current release - new code bugs:
- af_packet: make sure to pull the MAC header, avoid skb panic in GSO
- ptp_clockmatrix: fix inverted logic in is_single_shot()
- netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag
- dt-bindings: net: adin: fix adi,phy-output-clock description syntax
- wifi: iwlwifi: pcie: rename CAUSE macro, avoid MIPS build warning
Previous releases - regressions:
- Revert "net: af_key: add check for pfkey_broadcast in function
pfkey_process"
- tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
- nf_tables: disallow non-stateful expression in sets earlier
- nft_limit: clone packet limits' cost value
- nf_tables: double hook unregistration in netns path
- ping6: fix ping -6 with interface name
Previous releases - always broken:
- sched: fix memory barriers to prevent skbs from getting stuck
in lockless qdiscs
- neigh: set lower cap for neigh_managed_work rearming, avoid
constantly scheduling the probe work
- bpf: fix probe read error on big endian in ___bpf_prog_run()
- amt: memory leak and error handling fixes
Misc:
- ipv6: expand & rename accept_unsolicited_na to accept_untracked_na
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bWkn
-----END PGP SIGNATURE-----
Merge tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - new code bugs:
- af_packet: make sure to pull the MAC header, avoid skb panic in GSO
- ptp_clockmatrix: fix inverted logic in is_single_shot()
- netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag
- dt-bindings: net: adin: fix adi,phy-output-clock description syntax
- wifi: iwlwifi: pcie: rename CAUSE macro, avoid MIPS build warning
Previous releases - regressions:
- Revert "net: af_key: add check for pfkey_broadcast in function
pfkey_process"
- tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
- nf_tables: disallow non-stateful expression in sets earlier
- nft_limit: clone packet limits' cost value
- nf_tables: double hook unregistration in netns path
- ping6: fix ping -6 with interface name
Previous releases - always broken:
- sched: fix memory barriers to prevent skbs from getting stuck in
lockless qdiscs
- neigh: set lower cap for neigh_managed_work rearming, avoid
constantly scheduling the probe work
- bpf: fix probe read error on big endian in ___bpf_prog_run()
- amt: memory leak and error handling fixes
Misc:
- ipv6: expand & rename accept_unsolicited_na to accept_untracked_na"
* tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
net/af_packet: make sure to pull mac header
net: add debug info to __skb_pull()
net: CONFIG_DEBUG_NET depends on CONFIG_NET
stmmac: intel: Add RPL-P PCI ID
net: stmmac: use dev_err_probe() for reporting mdio bus registration failure
tipc: check attribute length for bearer name
ice: fix access-beyond-end in the switch code
nfp: remove padding in nfp_nfdk_tx_desc
ax25: Fix ax25 session cleanup problems
net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline
sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels
sfc/siena: fix considering that all channels have TX queues
socket: Don't use u8 type in uapi socket.h
net/sched: act_api: fix error code in tcf_ct_flow_table_fill_tuple_ipv6()
net: ping6: Fix ping -6 with interface name
macsec: fix UAF bug for real_dev
octeontx2-af: fix error code in is_valid_offset()
wifi: mac80211: fix use-after-free in chanctx code
bonding: guard ns_targets by CONFIG_IPV6
tcp: tcp_rtx_synack() can be called from process context
...
On platform where SVE is supported but there are less than 2 VLs available
the signal SVE change test should be skipped instead of failing.
Reported-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220524103149.2802-1-cristian.marussi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Update comments in the memblock tests so that they will have consistent
style.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmKYXQwTHHJwcHRAbGlu
dXguaWJtLmNvbQAKCRA5A4Ymyw79kawvB/4omytet0iJoAJ66J7iMPeR8yuCL5tD
idtUR5arytQ0G6tgjpDXjGE2114VWHbI4DaypmJ1xd/Z01cbqF3lWKj0mPIILq+Q
2JKbS8O5Y8j7if6br5CKRG6aIjqPa2Q3ZPp2a+eFux1ZA5EKdRZ4M+vsdRKVqD3/
ntJ/7T3wena3BbuQk6CPbj/BGmUYOzbYXDJrIXZy9iFsCdsKrdVReFuRbIf+f4j6
tPU0im16gwaibVRBhtpo8dNgaYXnSLmTYUMlFv9dUovAHOvhqQWAWynrESno+G02
RGihoA2ezxQ4gh8Eou8nwS/94phbz5ocu6A9rbBXorM0NPRs7Tyld0TN
=LvSB
-----END PGP SIGNATURE-----
Merge tag 'memblock-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock test suite updates from Mike Rapoport:
"Comment updates for memblock test suite
Update comments in the memblock tests so that they will have
consistent style"
* tag 'memblock-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: remove completed TODO item
memblock tests: update style of comments for memblock_free_*() functions
memblock tests: update style of comments for memblock_remove_*() functions
memblock tests: update style of comments for memblock_reserve_*() functions
memblock tests: update style of comments for memblock_add_*() functions
Let's standardize the s390x KVM selftest output to the TAP output
generated via the kselftests.h interface.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20220531101554.36844-5-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The tprot test currently does not have any output (unless one of
the TEST_ASSERT statement fails), so it's hard to say for a user
whether a certain new sub-test has been included in the binary or
not. Let's make this a little bit more user-friendly and include
some TAP output via the kselftests.h interface.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20220531101554.36844-4-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The sync_regs test currently does not have any output (unless one
of the TEST_ASSERT statement fails), so it's hard to say for a user
whether a certain new sub-test has been included in the binary or
not. Let's make this a little bit more user-friendly and include
some TAP output via the kselftests.h interface.
To be able to distinguish the different sub-tests more easily, we
also break up the huge main() function here in more fine grained
parts.
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20220531101554.36844-3-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The memop test currently does not have any output (unless one of the
TEST_ASSERT statement fails), so it's hard to say for a user whether
a certain new sub-test has been included in the binary or not. Let's
make this a little bit more user-friendly and include some TAP output
via the kselftests.h interface.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20220531101554.36844-2-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
When no l3 address is given, priv->family is set to NFPROTO_INET and
the evaluation function isn't called.
Call it too so l4-only rewrite can work.
Also add a test case for this.
Fixes: a33f387ecd ("netfilter: nft_nat: allow to specify layer 4 protocol NAT only")
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Follow the pattern used by other selftests like memfd and fall back on the
standard toolchain options to build with a system installed alsa-lib if
we don't get anything from pkg-config. This reduces our build dependencies
a bit in the common case while still allowing use of pkg-config in case
there is a need for it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220531151337.2933810-1-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
RFC 9131 changes default behaviour of handling RX of NA messages when the
corresponding entry is absent in the neighbour cache. The current
implementation is limited to accept just unsolicited NAs. However, the
RFC is more generic where it also accepts solicited NAs. Both types
should result in adding a STALE entry for this case.
Expand accept_untracked_na behaviour to also accept solicited NAs to
be compliant with the RFC and rename the sysctl knob to
accept_untracked_na.
Fixes: f9a2fb7331 ("net/ipv6: Introduce accept_unsolicited_na knob to implement router-side changes for RFC9131")
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220530101414.65439-1-aajith@arista.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmKUhm4aHHRzYm9nZW5k
QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHDDZRAAlIU5WIgXsCNb4AhzyE+W
ALU8/bA1scMBNBlClSwm3QeSn2PhaKZWV4jlSgLZito7vwQZg/97NaCCZoRalIoA
CjhGxw/Bc2SYnj3nR3D3LMYOyu7vIjupKEwZc40WMCT8gVQOXC/K/5cFH2hWVlQs
8xRz55TyXga2s+RwbIaml2HbvOWBkw9SYrrwgeRBgHpLfRD3IB5bbhR+X/lt4AnX
o+ViyvnX8e9Hq2Zt3HFN2MYtnmJ+CPoiMzt9ONMO/6gISYffh3d1CMXLGRD7p2KO
VsEcf3NgXgV5SulnK5inNqext3bUh0GFGMF3dwlqsJ2jtqLz8gAbtjeAqP8PcOm9
zT2vpdxFpgIVRIpSeimL5K3ypTzcUFoH3tHTH6yGjRHkAHNkJYZZGbEPNn3zm4U+
7gRbss0x+sYz4Wm3urPkyhuniO3vVGSI2Xmb0PZqOLPKlO9ihfRjxs+I17UVQbY1
CdNkVQmCldvhDmI7BAbWwa0jByaSRFWyu2XEiliQ4zom+cKQ4bjUZJuDOheyYKcK
jMgqZBPT7HN4ilM3TN7hFxbAFr8oNwA6Eqh8W2Qt6PX0QatvflQ6wvyhmyEDgnP7
AbnjPtkFBQeis8H3Hyv2UyVcpCDCNMFFonYqDqCQwNOThqgurPwlnjF4E5tDb5rG
q1A8JIq3BVa6rsgXisfwaF4=
=hTzI
-----END PGP SIGNATURE-----
Merge tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits)
MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC
MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA
MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem()
MIPS: Kconfig: Fix indentation and add endif comment
MIPS: bmips: Fix compiler warning observed on W=1 build
MIPS: Rewrite `csum_tcpudp_nofold' in plain C
mips: setup: use strscpy to replace strlcpy
MIPS: Octeon: add SNIC10E board
MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.
MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
MIPS: Ingenic: Add PWM nodes for X1830.
MIPS: Octeon: fix typo in comment
MIPS: loongson32: Kconfig: Remove extra space
MIPS: Sibyte: remove unnecessary return variable
MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation
selftests/ftrace: Save kprobe_events to test log
MIPS: tools: no need to initialise statics to 0
MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon
MIPS: VR41xx: Drop redundant spinlock initialization
MIPS: smp: optimization for flush_tlb_mm when exiting
...
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT).
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later).
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ.
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later.
- Drop support for system call instruction emulation.
- Many other small features and fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas Sanjaya, Bjorn
Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian King, Daniel Axtens, Dwaipayan
Ray, Fabiano Rosas, Finn Thain, Frank Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu
Hua, Haowen Bai, Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof Kozlowski, Laurent
Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes, Miaoqian Lin, Minghao Chi, Nathan
Chancellor, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár,
Paul Mackerras, Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang wangx, Xiaomeng Tong,
Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing, Yu Kuai, Zheng Bin, Zou Wei, Zucheng
Zheng.
-----BEGIN PGP SIGNATURE-----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=15oQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later
- Drop support for system call instruction emulation
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.
* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/64: Include cache.h directly in paca.h
powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
powerpc/xics: Include missing header
powerpc/powernv/pci: Drop VF MPS fixup
powerpc/fsl_book3e: Don't set rodata RO too early
powerpc/microwatt: Add mmu bits to device tree
powerpc/powernv/flash: Check OPAL flash calls exist before using
powerpc/powermac: constify device_node in of_irq_parse_oldworld()
powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
powerpc: Enable the DAWR on POWER9 DD2.3 and above
powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
powerpc: Fix all occurences of "the the"
selftests/powerpc/pmu/ebb: remove fixed_instruction.S
powerpc/platforms/83xx: Use of_device_get_match_data()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
powerpc/pseries/vas: Call misc_deregister if sysfs init fails
powerpc/papr_scm: Fix leaking nvdimm_events_map elements
...
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously hidden
behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL DVSEC
/ 'mem_enable') before enabling new CXL 2.0 decode configurations (CXL
HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYpFUogAKCRDfioYZHlFs
Zz+VAP9o/NkYhbaM2Ne9ImgsdJii96gA8nN7q/q/ZoXjsSx2WQD+NRC5d3ZwZDCa
9YKEkntnvbnAZOCs+ZUuyZBgNh6vsgU=
=p92w
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for this cycle.
The highlight is new driver-core infrastructure and CXL subsystem
changes for allowing lockdep to validate device_lock() usage. Thanks
to PeterZ for setting me straight on the current capabilities of the
lockdep API, and Greg acked it as well.
On the CXL ACPI side this update adds support for CXL _OSC so that
platform firmware knows that it is safe to still grant Linux native
control of PCIe hotplug and error handling in the presence of CXL
devices. A circular dependency problem was discovered between suspend
and CXL memory for cases where the suspend image might be stored in
CXL memory where that image also contains the PCI register state to
restore to re-enable the device. Disable suspend for now until an
architecture is defined to clarify that conflict.
Lastly a collection of reworks, fixes, and cleanups to the CXL
subsystem where support for snooping mailbox commands and properly
handling the "mem_enable" flow are the highlights.
Summary:
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously
hidden behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag
set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL
DVSEC / 'mem_enable') before enabling new CXL 2.0 decode
configurations (CXL HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure"
* tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (47 commits)
cxl/port: Enable HDM Capability after validating DVSEC Ranges
cxl/port: Reuse 'struct cxl_hdm' context for hdm init
cxl/port: Move endpoint HDM Decoder Capability init to port driver
cxl/pci: Drop @info argument to cxl_hdm_decode_init()
cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()
cxl/mem: Skip range enumeration if mem_enable clear
cxl/mem: Consolidate CXL DVSEC Range enumeration in the core
cxl/pci: Move cxl_await_media_ready() to the core
cxl/mem: Validate port connectivity before dvsec ranges
cxl/mem: Fix cxl_mem_probe() error exit
cxl/pci: Drop wait_for_valid() from cxl_await_media_ready()
cxl/pci: Consolidate wait_for_media() and wait_for_media_ready()
cxl/mem: Drop mem_enabled check from wait_for_media()
nvdimm: Fix firmware activation deadlock scenarios
device-core: Kill the lockdep_mutex
nvdimm: Drop nd_device_lock()
ACPI: NFIT: Drop nfit_device_lock()
nvdimm: Replace lockdep_mutex with local lock classes
cxl: Drop cxl_device_lock()
cxl/acpi: Add root device lockdep validation
...
API:
- Test in-place en/decryption with two sglists in testmgr.
- Fix process vs. softirq race in cryptd.
Algorithms:
- Add arm64 acceleration for sm4.
- Add s390 acceleration for chacha20.
Drivers:
- Add polarfire soc hwrng support in mpsf.
- Add support for TI SoC AM62x in sa2ul.
- Add support for ATSHA204 cryptochip in atmel-sha204a.
- Add support for PRNG in caam.
- Restore support for storage encryption in qat.
- Restore support for storage encryption in hisilicon/sec.
-----BEGIN PGP SIGNATURE-----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=oVRe
-----END PGP SIGNATURE-----
Merge tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Test in-place en/decryption with two sglists in testmgr
- Fix process vs softirq race in cryptd
Algorithms:
- Add arm64 acceleration for sm4
- Add s390 acceleration for chacha20
Drivers:
- Add polarfire soc hwrng support in mpsf
- Add support for TI SoC AM62x in sa2ul
- Add support for ATSHA204 cryptochip in atmel-sha204a
- Add support for PRNG in caam
- Restore support for storage encryption in qat
- Restore support for storage encryption in hisilicon/sec"
* tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume()
crypto: hisilicon/sec - delete the flag CRYPTO_ALG_ALLOCATES_MEMORY
crypto: qat - add support for 401xx devices
crypto: qat - re-enable registration of algorithms
crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag
crypto: qat - add param check for DH
crypto: qat - add param check for RSA
crypto: qat - remove dma_free_coherent() for DH
crypto: qat - remove dma_free_coherent() for RSA
crypto: qat - fix memory leak in RSA
crypto: qat - add backlog mechanism
crypto: qat - refactor submission logic
crypto: qat - use pre-allocated buffers in datapath
crypto: qat - set to zero DH parameters before free
crypto: s390 - add crypto library interface for ChaCha20
crypto: talitos - Uniform coding style with defined variable
crypto: octeontx2 - simplify the return expression of otx2_cpt_aead_cbc_aes_sha_setkey()
crypto: cryptd - Protect per-CPU resource by disabling BH.
crypto: sun8i-ce - do not fallback if cryptlen is less than sg length
crypto: sun8i-ce - rework debugging
...
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYpFPcQAKCRDfioYZHlFs
Z9A3AQCdfoT5sY3OK+I/3oTvJ//6lw2MtXrnXFM046ICKPi9sgD8CzR9mRAHA+vj
kxOtJEU2bA9naninXGORsDUndiNkwQo=
=gVIn
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and DAX updates from Dan Williams:
"New support for clearing memory errors when a file is in DAX mode,
alongside with some other fixes and cleanups.
Previously it was only possible to clear these errors using a truncate
or hole-punch operation to trigger the filesystem to reallocate the
block, now, any page aligned write can opportunistically clear errors
as well.
This change spans x86/mm, nvdimm, and fs/dax, and has received the
appropriate sign-offs. Thanks to Jane for her work on this.
Summary:
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)"
* tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
pmem: implement pmem_recovery_write()
pmem: refactor pmem_clear_poison()
dax: add .recovery_write dax_operation
dax: introduce DAX_RECOVERY_WRITE dax access mode
mce: fix set_mce_nospec to always unmap the whole page
x86/mce: relocate set{clear}_mce_nospec() functions
acpi/nfit: rely on mce->misc to determine poison granularity
testing: nvdimm: asm/mce.h is not needed in nfit.c
testing: nvdimm: iomap: make __nfit_test_ioremap a macro
nvdimm: Allow overwrite in the presence of disabled dimms
tools/testing/nvdimm: remove unneeded flush_workqueue
and alloc_contig_range alignment", from Zi Yan.
A series of z3fold cleanups and fixes from Miaohe Lin.
Some memcg selftests work from Michal Koutný <mkoutny@suse.com>
Some swap fixes and cleanups from Miaohe Lin.
Several individual minor fixups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYpEE7QAKCRDdBJ7gKXxA
jlamAP9WmjNdx+5Pz5OkkaSjBO7y7vBrBTcQ9e5pz8bUWRoQhwEA+WtsssLmq9aI
7DBDmBKYCMTbzOQTqaMRHkB+JWZo+Ao=
=L3f1
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- Two follow-on fixes for the post-5.19 series "Use pageblock_order for
cma and alloc_contig_range alignment", from Zi Yan.
- A series of z3fold cleanups and fixes from Miaohe Lin.
- Some memcg selftests work from Michal Koutný <mkoutny@suse.com>
- Some swap fixes and cleanups from Miaohe Lin
- Several individual minor fixups
* tag 'mm-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
mm/shmem.c: suppress shift warning
mm: Kconfig: reorganize misplaced mm options
mm: kasan: fix input of vmalloc_to_page()
mm: fix is_pinnable_page against a cma page
mm: filter out swapin error entry in shmem mapping
mm/shmem: fix infinite loop when swap in shmem error at swapoff time
mm/madvise: free hwpoison and swapin error entry in madvise_free_pte_range
mm/swapfile: fix lost swap bits in unuse_pte()
mm/swapfile: unuse_pte can map random data if swap read fails
selftests: memcg: factor out common parts of memory.{low,min} tests
selftests: memcg: remove protection from top level memcg
selftests: memcg: adjust expected reclaim values of protected cgroups
selftests: memcg: expect no low events in unprotected sibling
selftests: memcg: fix compilation
mm/z3fold: fix z3fold_page_migrate races with z3fold_map
mm/z3fold: fix z3fold_reclaim_page races with z3fold_free
mm/z3fold: always clear PAGE_CLAIMED under z3fold page lock
mm/z3fold: put z3fold page back into unbuddied list when reclaim or migration fails
revert "mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_alloc"
mm/z3fold: throw warning on failure of trylock_page in z3fold_alloc
...
The memory protection test setup and runtime is almost equal for
memory.low and memory.min cases.
It makes modification of the common parts prone to mistakes, since the
protections are similar not only in setup but also in principle, factor
the common part out.
Past exceptions between the tests:
- missing memory.min is fine (kept),
- test_memcg_low protected orphaned pagecache (adapted like
test_memcg_min and we keep the processes of protected memory running).
The evaluation in two tests is different (OOM of allocator vs low events
of protégés), this is kept different.
Link: https://lkml.kernel.org/r/20220518161859.21565-6-mkoutny@suse.com
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
CC: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Richard Palethorpe <rpalethorpe@suse.de>
Cc: David Vernet <void@manifault.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The reclaim is triggered by memory limit in a subtree, therefore the
testcase does not need configured protection against external reclaim.
Also, correct respective comments.
Link: https://lkml.kernel.org/r/20220518161859.21565-5-mkoutny@suse.com
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: David Vernet <void@manifault.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Richard Palethorpe <rpalethorpe@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The numbers are not easy to derive in a closed form (certainly mere
protections ratios do not apply), therefore use a simulation to obtain
expected numbers.
Link: https://lkml.kernel.org/r/20220518161859.21565-4-mkoutny@suse.com
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: David Vernet <void@manifault.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Richard Palethorpe <rpalethorpe@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This is effectively a revert of commit cdc69458a5 ("cgroup: account for
memory_recursiveprot in test_memcg_low()"). The case test_memcg_low will
fail with memory_recursiveprot until resolved in reclaim code.
However, this patch preserves the existing helpers and variables for later
uses.
Link: https://lkml.kernel.org/r/20220518161859.21565-3-mkoutny@suse.com
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: David Vernet <void@manifault.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Richard Palethorpe <rpalethorpe@suse.de>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memcontrol selftests fixups", v2.
Flushing the patches to make memcontrol selftests check the events
behavior we had consensus about (test_memcg_low fails).
(test_memcg_reclaim, test_memcg_swap_max fail for me now but it's present
even before the refactoring.)
The two bigger changes are:
- adjustment of the protected values to make tests succeed with the given
tolerance,
- both test_memcg_low and test_memcg_min check protection of memory in
populated cgroups (actually as per Documentation/admin-guide/cgroup-v2.rst
memory.min should not apply to empty cgroups, which is not the case
currently. Therefore I unified tests with the populated case in order to to
bring more broken tests).
This patch (of 5):
This fixes mis-applied changes from commit 72b1e03aa7 ("cgroup: account
for memory_localevents in test_memcg_oom_group_leaf_events()").
Link: https://lkml.kernel.org/r/20220518161859.21565-1-mkoutny@suse.com
Link: https://lkml.kernel.org/r/20220518161859.21565-2-mkoutny@suse.com
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Richard Palethorpe <rpalethorpe@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kernel function urandom_read is replaced with urandom_read_iter.
Therefore, kprobe on urandom_read is not working any more:
[root@eth50-1 bpf]# ./test_progs -n 161
test_stacktrace_build_id:PASS:skel_open_and_load 0 nsec
libbpf: kprobe perf_event_open() failed: No such file or directory
libbpf: prog 'oncpu': failed to create kprobe 'urandom_read+0x0' \
perf event: No such file or directory
libbpf: prog 'oncpu': failed to auto-attach: -2
test_stacktrace_build_id:FAIL:attach_tp err -2
161 stacktrace_build_id:FAIL
Fix this by replacing urandom_read with urandom_read_iter in the test.
Fixes: 1b388e7765 ("random: convert to using fops->read_iter()")
Reported-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20220526191608.2364049-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* ultravisor communication device driver
* fix TEID on terminating storage key ops
RISC-V:
* Added Sv57x4 support for G-stage page table
* Added range based local HFENCE functions
* Added remote HFENCE functions based on VCPU requests
* Added ISA extension registers in ONE_REG interface
* Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
* Add support for the ARMv8.6 WFxT extension
* Guard pages for the EL2 stacks
* Trap and emulate AArch32 ID registers to hide unsupported features
* Ability to select and save/restore the set of hypercalls exposed
to the guest
* Support for PSCI-initiated suspend in collaboration with userspace
* GICv3 register-based LPI invalidation support
* Move host PMU event merging into the vcpu data structure
* GICv3 ITS save/restore fixes
* The usual set of small-scale cleanups and fixes
x86:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
* Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
* Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
* V_TSC_AUX support
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKN9M4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNLeAf+KizAlQwxEehHHeNyTkZuKyMawrD6
zsqAENR6i1TxiXe7fDfPFbO2NR0ZulQopHbD9mwnHJ+nNw0J4UT7g3ii1IAVcXPu
rQNRGMVWiu54jt+lep8/gDg0JvPGKVVKLhxUaU1kdWT9PhIOC6lwpP3vmeWkUfRi
PFL/TMT0M8Nfryi0zHB0tXeqg41BiXfqO8wMySfBAHUbpv8D53D2eXQL6YlMM0pL
2quB1HxHnpueE5vj3WEPQ3PCdy1M2MTfCDBJAbZGG78Ljx45FxSGoQcmiBpPnhJr
C6UGP4ZDWpml5YULUoA70k5ylCbP+vI61U4vUtzEiOjHugpPV5wFKtx5nw==
=ozWx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
file-backed transparent hugepages.
Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
enablement of the recent huge page vmemmap optimization feature.
Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
David Vernet has done some fixup work on the memcg selftests.
Peter Xu has taught userfaultfd to handle write protection faults against
shmem- and hugetlbfs-backed files.
More DAMON development from SeongJae Park - adding online tuning of the
feature and support for monitoring of fixed virtual address ranges. Also
easier discovery of which monitoring operations are available.
Nadav Amit has done some optimization of TLB flushing during mprotect().
Neil Brown continues to labor away at improving our swap-over-NFS support.
David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
Peng Liu fixed some errors in the core hugetlb code.
Joao Martins has reduced the amount of memory consumed by device-dax's
compound devmaps.
Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
Roman Gushchin has done more work on the memcg selftests.
And, of course, many smaller fixes and cleanups. Notably, the customary
million cleanup serieses from Miaohe Lin.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
=nFe6
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
The psock_snd test sends and receives packets over loopback, and
the test results depend on parameter settings:
Set rp_filter=0,
or set rp_filter=1 and accept_local=1
so that the test will pass. Otherwise, this test will fail with
Resource temporarily unavailable:
sudo ./psock_snd.sh
dgram
tx: 128
rx: 142
./psock_snd: recv: Resource temporarily unavailable
For most distro kernel releases(like Ubuntu or Centos), the parameter
rp_filter is enabled by default, so it's necessary to enable the
parameter lo.accept_local in psock_snd test. And this test runs
inside a netns, changing a sysctl is fine.
Signed-off-by: luyun <luyun@kylinos.cn>
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220525031819.866684-1-luyun_611@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Not much dramatic changes at this time, but we've received quite
a lot of changes for ASoC, while there are still a few fixes and
quirks for usual HD- and USB-auido. Here are some highlights.
* ASoC:
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs
- Initial stages of Intel AVS driver merge
- Introduction of v4 IPC mechanism for SOF
- TDM mode support for AK4613
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
* Others
- A few regression fixes after the USB-audio endpoint management
refactoring
- More enhancements for Cirrus HD-audio codec support (still ongoing)
- Addition of generic serial MIDI driver
-----BEGIN PGP SIGNATURE-----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=5qBk
-----END PGP SIGNATURE-----
Merge tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Not much dramatic changes at this time, but we've received quite a lot
of changes for ASoC, while there are still a few fixes and quirks for
usual HD- and USB-auido. Here are some highlights.
ASoC:
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs
- Initial stages of Intel AVS driver merge
- Introduction of v4 IPC mechanism for SOF
- TDM mode support for AK4613
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
Others:
- A few regression fixes after the USB-audio endpoint management
refactoring
- More enhancements for Cirrus HD-audio codec support (still ongoing)
- Addition of generic serial MIDI driver"
* tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits)
ALSA: hda/realtek - Add new type for ALC245
ALSA: usb-audio: Configure sync endpoints before data
ALSA: ctxfi: fix typo in comment
ALSA: cs5535audio: fix typo in comment
ALSA: ctxfi: Add SB046x PCI ID
ALSA: usb-audio: Add missing ep_idx in fixed EP quirks
ALSA: usb-audio: Workaround for clock setup on TEAC devices
ALSA: lola: Bounds check loop iterator against streams array size
ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv()
ASoC: rt1308-sdw: add the default value of register 0xc320
ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic
ASoC: rt9120: Fix 3byte read, valule offset typo
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver.
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver
ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR'
ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get()
ASoC: SOF: mediatek: remove duplicate include in mt8195.c
ASoC: SOF: mediatek: Add mt8195 debug dump
ASoC: SOF: mediatek: Add mediatek common debug dump
...
Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding
to very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space
to remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections
that have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting.
This makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core
from Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wjii
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
Pull cgroup updates from Tejun Heo:
"Nothing too interesting. This adds cpu controller selftests and there
are a couple code cleanup patches"
* 'for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: remove the superfluous judgment
cgroup: Make cgroup_debug static
kseltest/cgroup: Make test_stress.sh work if run interactively
kselftest/cgroup: fix test_stress.sh to use OUTPUT dir
cgroup: Add config file to cgroup selftest suite
cgroup: Add test_cpucg_max_nested() testcase
cgroup: Add test_cpucg_max() testcase
cgroup: Add test_cpucg_nested_weight_underprovisioned() testcase
cgroup: Adding test_cpucg_nested_weight_overprovisioned() testcase
cgroup: Add test_cpucg_weight_underprovisioned() testcase
cgroup: Add test_cpucg_weight_overprovisioned() testcase
cgroup: Add test_cpucg_stats() testcase to cgroup cpu selftests
cgroup: Add new test_cpu.c test suite in cgroup selftests
This KUnit update for Linux 5.19-rc1 consists of several fixes, cleanups,
and enhancements to tests and framework:
- introduces _NULL and _NOT_NULL macros to pointer error checks
- reworks kunit_resource allocation policy to fix memory leaks when
caller doesn't specify free() function to be used when allocating
memory using kunit_add_resource() and kunit_alloc_resource() funcs.
- adds ability to specify suite-level init and exit functions
-----BEGIN PGP SIGNATURE-----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=DzVQ
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests and framework:
- introduce _NULL and _NOT_NULL macros to pointer error checks
- rework kunit_resource allocation policy to fix memory leaks when
caller doesn't specify free() function to be used when allocating
memory using kunit_add_resource() and kunit_alloc_resource() funcs.
- add ability to specify suite-level init and exit functions"
* tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits)
kunit: tool: Use qemu-system-i386 for i386 runs
kunit: fix executor OOM error handling logic on non-UML
kunit: tool: update riscv QEMU config with new serial dependency
kcsan: test: use new suite_{init,exit} support
kunit: tool: Add list of all valid test configs on UML
kunit: take `kunit_assert` as `const`
kunit: tool: misc cleanups
kunit: tool: minor cosmetic cleanups in kunit_parser.py
kunit: tool: make parser stop overwriting status of suites w/ no_tests
kunit: tool: remove dead parse_crash_in_log() logic
kunit: tool: print clearer error message when there's no TAP output
kunit: tool: stop using a shell to run kernel under QEMU
kunit: tool: update test counts summary line format
kunit: bail out of test filtering logic quicker if OOM
lib/Kconfig.debug: change KUnit tests to default to KUNIT_ALL_TESTS
kunit: Rework kunit_resource allocation policy
kunit: fix debugfs code to use enum kunit_status, not bool
kfence: test: use new suite_{init/exit} support, add .kunitconfig
kunit: add ability to specify suite-level init and exit functions
kunit: rename print_subtest_{start,end} for clarity (s/subtest/suite)
...
This Kselftest update for Linux 5.19-rc1 consists of several fixes,
cleanups, and enhancements to tests:
- adds mips support for kprobe args string and syntax tests
- updates to resctrl test to use kselftest framework
- fixes, cleanups, and enhancements to tests
-----BEGIN PGP SIGNATURE-----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=MKRc
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests:
- add mips support for kprobe args string and syntax tests
- updates to resctrl test to use kselftest framework
- fixes, cleanups, and enhancements to tests"
* tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftests/ir : Improve readability of modprobe error message
selftests/resctrl: Fix null pointer dereference on open failed
selftests/resctrl: Add missing SPDX license to Makefile
selftests/resctrl: Update README about using kselftest framework to build/run resctrl_tests
selftests/resctrl: Make resctrl_tests run using kselftest framework
selftests/resctrl: Fix resctrl_tests' return code to work with selftest framework
selftests/resctrl: Change the default limited time to 120 seconds
selftests/resctrl: Kill child process before parent process terminates if SIGTERM is received
selftests/resctrl: Print a message if the result of MBM&CMT tests is failed on Intel CPU
selftests/resctrl: Extend CPU vendor detection
selftests/x86/corrupt_xstate_header: Use provided __cpuid_count() macro
selftests/x86/amx: Use provided __cpuid_count() macro
selftests/vm/pkeys: Use provided __cpuid_count() macro
selftests: Provide local define of __cpuid_count()
selftests/damon: add damon to selftests root Makefile
selftests/binderfs: Improve message to provide more info
selftests: mqueue: drop duplicate min definition
selftests/ftrace: add mips support for kprobe args syntax tests
selftests/ftrace: add mips support for kprobe args string tests
The default "timeout" for one kselftest is 45 seconds, while some cases in
run_vmtests.sh require more time. This will cause testing timeout like:
not ok 4 selftests: vm: run_vmtests.sh # TIMEOUT 45 seconds
Therefore, add the "settings" file with timeout variable so users can set
the "timeout" value.
Link: https://lkml.kernel.org/r/20220521083825.319654-4-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The "test_hmm.sh" file used by run_vmtests.sh dose not be installed into
INSTALL_PATH. Thus run_vmtests.sh can not call it in INSTALL_PATH:
---------------------------
running ./test_hmm.sh smoke
---------------------------
./run_vmtests.sh: line 74: ./test_hmm.sh: No such file or directory
[FAIL]
-----------------------
Add "test_hmm.sh" to TEST_FILES so that it will be installed.
Link: https://lkml.kernel.org/r/20220521083825.319654-3-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests: vm: a few fixup patches".
This series contains three fixup patches for vm selftests. They are
independent. Please see the patches.
This patch (of 3):
Currently, ksm_tests operates "merge_across_nodes" with NUMA either
enabled or disabled. In a system with NUMA disabled, these operations
will fail and output a misleading report given "merge_across_nodes" does
not exist in sysfs:
----------------------------
running ./ksm_tests -M -p 10
----------------------------
f /sys/kernel/mm/ksm/merge_across_nodes
fopen: No such file or directory
Cannot save default tunables
[FAIL]
----------------------
So check numa_available() before those operations to skip them if NUMA is
disabled.
Link: https://lkml.kernel.org/r/20220521083825.319654-1-patrick.wang.shcn@gmail.com
Link: https://lkml.kernel.org/r/20220521083825.319654-2-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Spelling mistake (triple letters) in comment. Detected with the help of
Coccinelle.
Link: https://lkml.kernel.org/r/20220521111145.81697-80-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce process_mrelease syscall sanity tests which include tests
which expect to fail:
- process_mrelease with invalid pidfd and flags inputs
- process_mrelease on a live process with no pending signals
and valid process_mrelease usage which is expected to succeed. Because
process_mrelease has to be used against a process with a pending SIGKILL,
it's possible that the process exits before process_mrelease gets called.
In such cases we retry the test with a victim that allocates twice more
memory up to 1GB. This would require the victim process to spend more
time during exit and process_mrelease has a better chance of catching the
process before it exits and succeeding.
On success the test reports the amount of memory the child had to allocate
for reaping to succeed. Sample output:
$ mrelease_test
Success reaping a child with 1MB of memory allocations
On failure the test reports the failure. Sample outputs:
$ mrelease_test
All process_mrelease attempts failed!
$ mrelease_test
process_mrelease: Invalid argument
Link: https://lkml.kernel.org/r/20220518204316.13131-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If the first goto is taken, 'fd' is not opened yet (and is un-initialized).
So a direct return is safer.
Link: https://lkml.kernel.org/r/628312312eb40e0e39463a2c06415fde5295c716.1653229120.git.christophe.jaillet@wanadoo.fr
Fixes: c1a31a2f7a ("cgroup: fix racy check in alloc_pagecache_max_30M() helper function")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: David Vernet <void@manifault.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fixing side effect of the so-called opportunistic change in the commit.
Fixes: dc8a9febbab0 ("KVM: selftests: x86: Fix test failure on arch lbr capable platforms")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518170118.66263-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
-----BEGIN PGP SIGNATURE-----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=Xznv
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-5.19-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 5.19
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=mh7W
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.19
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
[Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated
from 4 to 6. - Paolo]
On Arch LBR capable platforms, LBR_FMT in perf capability msr is 0x3f,
so the last format test will fail. Use a true invalid format(0x30) for
the test if it's running on these platforms. Opportunistically change
the file name to reflect the tests actually carried out.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220512084046.105479-1-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Important changes:
* improve the path_rename LSM hook implementations for RENAME_EXCHANGE;
* fix a too-restrictive filesystem control for a rare corner case;
* set the nested sandbox limitation to 16 layers;
* add a new LANDLOCK_ACCESS_FS_REFER access right to properly handle
file reparenting (i.e. full rename and link support);
* add new tests and documentation;
* format code with clang-format to make it easier to maintain and
contribute.
Related patch series:
* [PATCH v1 0/7] Landlock: Clean up coding style with clang-format
https://lore.kernel.org/r/20220506160513.523257-1-mic@digikod.net
* [PATCH v2 00/10] Minor Landlock fixes and new tests
https://lore.kernel.org/r/20220506160820.524344-1-mic@digikod.net
* [PATCH v3 00/12] Landlock: file linking and renaming support
https://lore.kernel.org/r/20220506161102.525323-1-mic@digikod.net
* [PATCH v2] landlock: Explain how to support Landlock
https://lore.kernel.org/r/20220513112743.156414-1-mic@digikod.net
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCYousmBAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSWToA/32m9xJhfppiTBHqw6Dt47v4sjuE/3ScwO/O
40rzaqs3AQD8AWHeqvPuM2lwPp1NQS4mcfv7K3DSCGBbUjHqdcl3Aw==
=+tJO
-----END PGP SIGNATURE-----
Merge tag 'landlock-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock updates from Mickaël Salaün:
- improve the path_rename LSM hook implementations for RENAME_EXCHANGE;
- fix a too-restrictive filesystem control for a rare corner case;
- set the nested sandbox limitation to 16 layers;
- add a new LANDLOCK_ACCESS_FS_REFER access right to properly handle
file reparenting (i.e. full rename and link support);
- add new tests and documentation;
- format code with clang-format to make it easier to maintain and
contribute.
* tag 'landlock-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (30 commits)
landlock: Explain how to support Landlock
landlock: Add design choices documentation for filesystem access rights
landlock: Document good practices about filesystem policies
landlock: Document LANDLOCK_ACCESS_FS_REFER and ABI versioning
samples/landlock: Add support for file reparenting
selftests/landlock: Add 11 new test suites dedicated to file reparenting
landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER
LSM: Remove double path_rename hook calls for RENAME_EXCHANGE
landlock: Move filesystem helpers and add a new one
landlock: Fix same-layer rule unions
landlock: Create find_rule() from unmask_layers()
landlock: Reduce the maximum number of layers to 16
landlock: Define access_mask_t to enforce a consistent access mask size
selftests/landlock: Test landlock_create_ruleset(2) argument check ordering
landlock: Change landlock_restrict_self(2) check ordering
landlock: Change landlock_add_rule(2) argument check ordering
selftests/landlock: Add tests for O_PATH
selftests/landlock: Fully test file rename with "remove" access
selftests/landlock: Extend access right tests to directories
selftests/landlock: Add tests for unknown access rights
...
- Initial support for the ARMv9 Scalable Matrix Extension (SME). SME
takes the approach used for vectors in SVE and extends this to provide
architectural support for matrix operations. No KVM support yet, SME
is disabled in guests.
- Support for crashkernel reservations above ZONE_DMA via the
'crashkernel=X,high' command line option.
- btrfs search_ioctl() fix for live-lock with sub-page faults.
- arm64 perf updates: support for the Hisilicon "CPA" PMU for monitoring
coherent I/O traffic, support for Arm's CMN-650 and CMN-700
interconnect PMUs, minor driver fixes, kerneldoc cleanup.
- Kselftest updates for SME, BTI, MTE.
- Automatic generation of the system register macros from a 'sysreg'
file describing the register bitfields.
- Update the type of the function argument holding the ESR_ELx register
value to unsigned long to match the architecture register size
(originally 32-bit but extended since ARMv8.0).
- stacktrace cleanups.
- ftrace cleanups.
- Miscellaneous updates, most notably: arm64-specific huge_ptep_get(),
avoid executable mappings in kexec/hibernate code, drop TLB flushing
from get_clear_flush() (and rename it to get_clear_contig()),
ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE.
-----BEGIN PGP SIGNATURE-----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=0DjE
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Initial support for the ARMv9 Scalable Matrix Extension (SME).
SME takes the approach used for vectors in SVE and extends this to
provide architectural support for matrix operations. No KVM support
yet, SME is disabled in guests.
- Support for crashkernel reservations above ZONE_DMA via the
'crashkernel=X,high' command line option.
- btrfs search_ioctl() fix for live-lock with sub-page faults.
- arm64 perf updates: support for the Hisilicon "CPA" PMU for
monitoring coherent I/O traffic, support for Arm's CMN-650 and
CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup.
- Kselftest updates for SME, BTI, MTE.
- Automatic generation of the system register macros from a 'sysreg'
file describing the register bitfields.
- Update the type of the function argument holding the ESR_ELx register
value to unsigned long to match the architecture register size
(originally 32-bit but extended since ARMv8.0).
- stacktrace cleanups.
- ftrace cleanups.
- Miscellaneous updates, most notably: arm64-specific huge_ptep_get(),
avoid executable mappings in kexec/hibernate code, drop TLB flushing
from get_clear_flush() (and rename it to get_clear_contig()),
ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (145 commits)
arm64/sysreg: Generate definitions for FAR_ELx
arm64/sysreg: Generate definitions for DACR32_EL2
arm64/sysreg: Generate definitions for CSSELR_EL1
arm64/sysreg: Generate definitions for CPACR_ELx
arm64/sysreg: Generate definitions for CONTEXTIDR_ELx
arm64/sysreg: Generate definitions for CLIDR_EL1
arm64/sve: Move sve_free() into SVE code section
arm64: Kconfig.platforms: Add comments
arm64: Kconfig: Fix indentation and add comments
arm64: mm: avoid writable executable mappings in kexec/hibernate code
arm64: lds: move special code sections out of kernel exec segment
arm64/hugetlb: Implement arm64 specific huge_ptep_get()
arm64/hugetlb: Use ptep_get() to get the pte value of a huge page
arm64: kdump: Do not allocate crash low memory if not needed
arm64/sve: Generate ZCR definitions
arm64/sme: Generate defintions for SVCR
arm64/sme: Generate SMPRI_EL1 definitions
arm64/sme: Automatically generate SMPRIMAP_EL2 definitions
arm64/sme: Automatically generate SMIDR_EL1 defines
arm64/sme: Automatically generate defines for SMCR
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-05-23
We've added 113 non-merge commits during the last 26 day(s) which contain
a total of 121 files changed, 7425 insertions(+), 1586 deletions(-).
The main changes are:
1) Speed up symbol resolution for kprobes multi-link attachments, from Jiri Olsa.
2) Add BPF dynamic pointer infrastructure e.g. to allow for dynamically sized ringbuf
reservations without extra memory copies, from Joanne Koong.
3) Big batch of libbpf improvements towards libbpf 1.0 release, from Andrii Nakryiko.
4) Add BPF link iterator to traverse links via seq_file ops, from Dmitrii Dolgov.
5) Add source IP address to BPF tunnel key infrastructure, from Kaixi Fan.
6) Refine unprivileged BPF to disable only object-creating commands, from Alan Maguire.
7) Fix JIT blinding of ld_imm64 when they point to subprogs, from Alexei Starovoitov.
8) Add BPF access to mptcp_sock structures and their meta data, from Geliang Tang.
9) Add new BPF helper for access to remote CPU's BPF map elements, from Feng Zhou.
10) Allow attaching 64-bit cookie to BPF link of fentry/fexit/fmod_ret, from Kui-Feng Lee.
11) Follow-ups to typed pointer support in BPF maps, from Kumar Kartikeya Dwivedi.
12) Add busy-poll test cases to the XSK selftest suite, from Magnus Karlsson.
13) Improvements in BPF selftest test_progs subtest output, from Mykola Lysenko.
14) Fill bpf_prog_pack allocator areas with illegal instructions, from Song Liu.
15) Add generic batch operations for BPF map-in-map cases, from Takshak Chahande.
16) Make bpf_jit_enable more user friendly when permanently on 1, from Tiezhu Yang.
17) Fix an array overflow in bpf_trampoline_get_progs(), from Yuntao Wang.
====================
Link: https://lore.kernel.org/r/20220523223805.27931-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds tests for dynptrs, which include cases that the
verifier needs to reject (for example, a bpf_ringbuf_reserve_dynptr
without a corresponding bpf_ringbuf_submit/discard_dynptr) as well
as cases that should successfully pass.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-7-joannelkoong@gmail.com
This pull request contains the following branches:
docs.2022.04.20a: Documentation updates.
fixes.2022.04.20a: Miscellaneous fixes.
nocb.2022.04.11b: Callback-offloading updates, mainly simplifications.
rcu-tasks.2022.04.11b: RCU-tasks updates, including some -rt fixups,
handling of systems with sparse CPU numbering, and a fix for a
boot-time race-condition failure.
srcu.2022.05.03a: Put SRCU on a memory diet in order to reduce the size
of the srcu_struct structure.
torture.2022.04.11b: Torture-test updates fixing some bugs in tests and
closing some testing holes.
torture-tasks.2022.04.20a: Torture-test updates for the RCU tasks flavors,
most notably ensuring that building rcutorture and friends does
not change the RCU-tasks-related Kconfig options.
torturescript.2022.04.20a: Torture-test scripting updates.
exp.2022.05.11a: Expedited grace-period updates, most notably providing
milliseconds-scale (not all that) soft real-time response from
synchronize_rcu_expedited(). This is also the first time in
almost 30 years of RCU that someone other than me has pushed
for a reduction in the RCU CPU stall-warning timeout, in this
case by more than three orders of magnitude from 21 seconds to
20 milliseconds. This tighter timeout applies only to expedited
grace periods.
-----BEGIN PGP SIGNATURE-----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=4spH
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.05.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU update from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offloading updates, mainly simplifications
- RCU-tasks updates, including some -rt fixups, handling of systems
with sparse CPU numbering, and a fix for a boot-time race-condition
failure
- Put SRCU on a memory diet in order to reduce the size of the
srcu_struct structure
- Torture-test updates fixing some bugs in tests and closing some
testing holes
- Torture-test updates for the RCU tasks flavors, most notably ensuring
that building rcutorture and friends does not change the
RCU-tasks-related Kconfig options
- Torture-test scripting updates
- Expedited grace-period updates, most notably providing
milliseconds-scale (not all that) soft real-time response from
synchronize_rcu_expedited().
This is also the first time in almost 30 years of RCU that someone
other than me has pushed for a reduction in the RCU CPU stall-warning
timeout, in this case by more than three orders of magnitude from 21
seconds to 20 milliseconds. This tighter timeout applies only to
expedited grace periods
* tag 'rcu.2022.05.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
rcu: Move expedited grace period (GP) work to RT kthread_worker
rcu: Introduce CONFIG_RCU_EXP_CPU_STALL_TIMEOUT
srcu: Drop needless initialization of sdp in srcu_gp_start()
srcu: Prevent expedited GPs and blocking readers from consuming CPU
srcu: Add contention check to call_srcu() srcu_data ->lock acquisition
srcu: Automatically determine size-transition strategy at boot
rcutorture: Make torture.sh allow for --kasan
rcutorture: Make torture.sh refscale and rcuscale specify Tasks Trace RCU
rcutorture: Make kvm.sh allow more memory for --kasan runs
torture: Save "make allmodconfig" .config file
scftorture: Remove extraneous "scf" from per_version_boot_params
rcutorture: Adjust scenarios' Kconfig options for CONFIG_PREEMPT_DYNAMIC
torture: Enable CSD-lock stall reports for scftorture
torture: Skip vmlinux check for kvm-again.sh runs
scftorture: Adjust for TASKS_RCU Kconfig option being selected
rcuscale: Allow rcuscale without RCU Tasks Rude/Trace
rcuscale: Allow rcuscale without RCU Tasks
refscale: Allow refscale without RCU Tasks Rude/Trace
refscale: Allow refscale without RCU Tasks
rcutorture: Allow specifying per-scenario stat_interval
...
These test suites try to check all edge cases for directory and file
renaming or linking involving a new parent directory, with and without
LANDLOCK_ACCESS_FS_REFER and other access rights.
layout1:
* reparent_refer: Tests simple FS_REFER usage.
* reparent_link: Tests a mix of FS_MAKE_REG and FS_REFER with links.
* reparent_rename: Tests a mix of FS_MAKE_REG and FS_REFER with renames
and RENAME_EXCHANGE.
* reparent_exdev_layers_rename1/2: Tests renames with two layers.
* reparent_exdev_layers_exchange1/2/3: Tests exchanges with two layers.
* reparent_remove: Tests file and directory removal with rename.
* reparent_dom_superset: Tests access partial ordering.
layout1_bind:
* reparent_cross_mount: Tests FS_REFER propagation across mount points.
Test coverage for security/landlock is 95.4% of 604 lines according to
gcc/gcov-11.
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506161102.525323-9-mic@digikod.net
Add a new LANDLOCK_ACCESS_FS_REFER access right to enable policy writers
to allow sandboxed processes to link and rename files from and to a
specific set of file hierarchies. This access right should be composed
with LANDLOCK_ACCESS_FS_MAKE_* for the destination of a link or rename,
and with LANDLOCK_ACCESS_FS_REMOVE_* for a source of a rename. This
lift a Landlock limitation that always denied changing the parent of an
inode.
Renaming or linking to the same directory is still always allowed,
whatever LANDLOCK_ACCESS_FS_REFER is used or not, because it is not
considered a threat to user data.
However, creating multiple links or renaming to a different parent
directory may lead to privilege escalations if not handled properly.
Indeed, we must be sure that the source doesn't gain more privileges by
being accessible from the destination. This is handled by making sure
that the source hierarchy (including the referenced file or directory
itself) restricts at least as much the destination hierarchy. If it is
not the case, an EXDEV error is returned, making it potentially possible
for user space to copy the file hierarchy instead of moving or linking
it.
Instead of creating different access rights for the source and the
destination, we choose to make it simple and consistent for users.
Indeed, considering the previous constraint, it would be weird to
require such destination access right to be also granted to the source
(to make it a superset). Moreover, RENAME_EXCHANGE would also add to
the confusion because of paths being both a source and a destination.
See the provided documentation for additional details.
New tests are provided with a following commit.
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506161102.525323-8-mic@digikod.net
The original behavior was to check if the full set of requested accesses
was allowed by at least a rule of every relevant layer. This didn't
take into account requests for multiple accesses and same-layer rules
allowing the union of these accesses in a complementary way. As a
result, multiple accesses requested on a file hierarchy matching rules
that, together, allowed these accesses, but without a unique rule
allowing all of them, was illegitimately denied. This case should be
rare in practice and it can only be triggered by the path_rename or
file_open hook implementations.
For instance, if, for the same layer, a rule allows execution
beneath /a/b and another rule allows read beneath /a, requesting access
to read and execute at the same time for /a/b should be allowed for this
layer.
This was an inconsistency because the union of same-layer rule accesses
was already allowed if requested once at a time anyway.
This fix changes the way allowed accesses are gathered over a path walk.
To take into account all these rule accesses, we store in a matrix all
layer granting the set of requested accesses, according to the handled
accesses. To avoid heap allocation, we use an array on the stack which
is 2*13 bytes. A following commit bringing the LANDLOCK_ACCESS_FS_REFER
access right will increase this size to reach 112 bytes (2*14*4) in case
of link or rename actions.
Add a new layout1.layer_rule_unions test to check that accesses from
different rules pertaining to the same layer are ORed in a file
hierarchy. Also test that it is not the case for rules from different
layers.
Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20220506161102.525323-5-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
The maximum number of nested Landlock domains is currently 64. Because
of the following fix and to help reduce the stack size, let's reduce it
to 16. This seems large enough for a lot of use cases (e.g. sandboxed
init service, spawning a sandboxed SSH service, in nested sandboxed
containers). Reducing the number of nested domains may also help to
discover misuse of Landlock (e.g. creating a domain per rule).
Add and use a dedicated layer_mask_t typedef to fit with the number of
layers. This might be useful when changing it and to keep it consistent
with the maximum number of layers.
Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20220506161102.525323-3-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add inval_create_ruleset_arguments, extension of
inval_create_ruleset_flags, to also check error ordering for
landlock_create_ruleset(2).
This is similar to the previous commit checking landlock_add_rule(2).
Test coverage for security/landlock is 94.4% of 504 lines accorging to
gcc/gcov-11.
Link: https://lore.kernel.org/r/20220506160820.524344-11-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
According to the Landlock goal to be a security feature available to
unprivileges processes, it makes more sense to first check for
no_new_privs before checking anything else (i.e. syscall arguments).
Merge inval_fd_enforce and unpriv_enforce_without_no_new_privs tests
into the new restrict_self_checks_ordering. This is similar to the
previous commit checking other syscalls.
Link: https://lore.kernel.org/r/20220506160820.524344-10-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
This makes more sense to first check the ruleset FD and then the rule
attribute. It will be useful to factor out code for other rule types.
Add inval_add_rule_arguments tests, extension of empty_path_beneath_attr
tests, to also check error ordering for landlock_add_rule(2).
Link: https://lore.kernel.org/r/20220506160820.524344-9-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
These tests were missing to check the check_access_path() call with all
combinations of maybe_remove(old_dentry) and maybe_remove(new_dentry).
Extend layout1.link with a new complementary test and check that
REMOVE_FILE is not required to link a file.
Cc: Shuah Khan <shuah@kernel.org>
Link: https://lore.kernel.org/r/20220506160820.524344-7-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Make sure that all filesystem access rights can be tied to directories.
Rename layout1.file_access_rights to layout1.file_and_dir_access_rights
to reflect this change.
Cc: Shuah Khan <shuah@kernel.org>
Link: https://lore.kernel.org/r/20220506160820.524344-6-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Replace SYS_<syscall> with __NR_<syscall>. Using the __NR_<syscall>
notation, provided by UAPI, is useful to build tests on systems without
the SYS_<syscall> definitions.
Replace SYS_pivot_root with __NR_pivot_root, and SYS_move_mount with
__NR_move_mount.
Define renameat2() and RENAME_EXCHANGE if they are unknown to old build
systems.
Cc: Shuah Khan <shuah@kernel.org>
Link: https://lore.kernel.org/r/20220506160820.524344-3-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Use the standard interface order h1, swp1, swp2, h2 that is used by the
forwarding selftest framework. The previous order was confusing even
with the ASCII drawing. That isn't needed anymore.
This also drops the fixed MAC addresses and uses STABLE_MAC_ADDRS, which
ensures the MAC addresses are unique.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a robotic rename as follows:
eth0 -> swp1
eth1 -> swp2
eth2 -> h2
eth3 -> h1
This brings the selftest more in line with the other forwarding
selftests, where h1 is connected to swp1, and h2 to swp2.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bring this driver-specific selftest output in line with the other
selftests.
Before:
Testing VLAN pop.. OK
Testing VLAN push.. OK
Testing ingress VLAN modification.. OK
Testing egress VLAN modification.. OK
Testing frame prioritization.. OK
After:
TEST: VLAN pop [ OK ]
TEST: VLAN push [ OK ]
TEST: Ingress VLAN modification [ OK ]
TEST: Egress VLAN modification [ OK ]
TEST: Frame prioritization [ OK ]
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add newly added stress_reuseport_listen object to .gitignore file.
Fixes: ec8cb4f617 ("net: selftests: Stress reuseport listen")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 3752e453f6 ("selftests/powerpc: Add tests of PMU EBBs") added
selftest testcases to verify EBB interface. instruction_count_test.c
testcase needs a fixed loop function to count overhead. Instead of using
the thirty_two_instruction_loop() in fixed_instruction_loop.S in ebb
folder, file is linked with thirty_two_instruction_loop() in loop.S from
top folder. Since fixed_instruction_loop.S not used, patch removes the
file.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220322045638.10443-1-maddy@linux.ibm.com
In commit f3054ffd71 ("selftests/powerpc: Return skip code for
spectre_v2"), the spectre_v2 selftest is updated to be aware of cases
where the vulnerability status reported in sysfs is incorrect, skipping
the test instead.
This happens because qemu can misrepresent the mitigation status of the
host to the guest. If the count cache is disabled in the host, and this
is correctly reported to the guest, then the guest won't apply
mitigations. If the guest is then migrated to a new host where
mitigations are necessary, it is now vulnerable because it has not
applied mitigations.
Update the selftest to report when we see excessive misses, indicative of
the count cache being disabled. If software flushing is enabled, also
warn that these flushes are just wasting performance.
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Rebase and update change log appropriately]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210608064809.199116-1-ruscur@russell.cc
* Correctly expose GICv3 support even if no irqchip is created
so that userspace doesn't observe it changing pointlessly
(fixing a regression with QEMU)
* Don't issue a hypercall to set the id-mapped vectors when
protected mode is enabled (fix for pKVM in combination with
CPUs affected by Spectre-v3a)
x86: Five oneliners, of which the most interesting two are:
* a NULL pointer dereference on INVPCID executed with
paging disabled, but only if KVM is using shadow paging
* an incorrect bsearch comparison function which could truncate
the result and apply PMU event filtering incorrectly. This one
comes with a selftests update too.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKH1qYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMadgf9E1u5skRjtv+RWPbfs/v3irnirY/L
x5TaVb2yiPahNH5qgFL2xnJ9jCcCNlxxn5uKpEAi0JFrqc6uCS0Rh1TPfqEN0lLt
5PGJD2JSKXAWVRkObS3j5iZuQX4ZvDRY53eSQv6pdcU+evjTq1H5WZ83uciqo0J5
xilKEtUIpJ9o0ELw9BjAd3vlRlOPpveHq+48DJN7cO0L/eju9Lz9kqJQTE7WQato
SsmpXPNIaSlk3U3yWAfOYgzyVkZQW/JiKS++TfVr5VQMppbOI6bxo3UfDAygiA9e
9KZAWrwoXqDMNp9756Y6lfT7g8PblnXgOvTXa/cV+ypaeAuuTU/iBSLwxQ==
=gWsP
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly expose GICv3 support even if no irqchip is created so
that userspace doesn't observe it changing pointlessly (fixing a
regression with QEMU)
- Don't issue a hypercall to set the id-mapped vectors when protected
mode is enabled (fix for pKVM in combination with CPUs affected by
Spectre-v3a)
x86 (five oneliners, of which the most interesting two are):
- a NULL pointer dereference on INVPCID executed with paging
disabled, but only if KVM is using shadow paging
- an incorrect bsearch comparison function which could truncate the
result and apply PMU event filtering incorrectly. This one comes
with a selftests update too"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: fix NULL pointer dereference on guest INVPCID
KVM: x86: hyper-v: fix type of valid_bank_mask
KVM: Free new dirty bitmap if creating a new memslot fails
KVM: eventfd: Fix false positive RCU usage warning
selftests: kvm/x86: Verify the pmu event filter matches the correct event
selftests: kvm/x86: Add the helper function create_pmu_event_filter
kvm: x86/pmu: Fix the compare function used by the pmu event filter
KVM: arm64: Don't hypercall before EL2 init
KVM: arm64: vgic-v3: Consistently populate ID_AA64PFR0_EL1.GIC
KVM: x86/mmu: Update number of zapped pages even if page list is stable
tests load/attach bpf prog with maps, perfbuf and ringbuf, pinning
them. Then effective caps are dropped and we verify we can
- pick up the pin
- create ringbuf/perfbuf
- get ringbuf/perfbuf events, carry out map update, lookup and delete
- create a link
Negative testing also ensures
- BPF prog load fails
- BPF map create fails
- get fd by id fails
- get next id fails
- query fails
- BTF load fails
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/1652970334-30510-3-git-send-email-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test populates the bhash table for a given port with
MAX_THREADS * MAX_CONNECTIONS sockets, and then times how long
a bind request on the port takes.
When populating the bhash table, we create the sockets and then bind
the sockets to the same address and port (SO_REUSEADDR and SO_REUSEPORT
are set). When timing how long a bind on the port takes, we bind on a
different address without SO_REUSEPORT set. We do not set SO_REUSEPORT
because we are interested in the case where the bind request does not
go through the tb->fastreuseport path, which is fragile (eg
tb->fastreuseport path does not work if binding with a different uid).
To run the test locally, I did:
* ulimit -n 65535000
* ip addr add 2001:0db8:0:f101::1 dev eth0
* ./bind_bhash_test 443
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 49bb39bdda ("selftests: fib_nexthops: Make the test more robust")
increased the timeout of ping commands to 5 seconds, to make the test
more robust. Make the timeout configurable using '-w' argument to allow
user to change it depending on the system that runs the test. Some systems
suffer from slow forwarding performance, so they may need to change the
timeout.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220519070921.3559701-1-amcohen@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the trampoline_count test doesn't include any fmod_ret bpf
programs, fix it to make the test cover all possible trampoline program
types.
Since fmod_ret bpf programs can't be attached to __set_task_comm function,
as it's neither whitelisted for error injection nor a security hook, change
it to bpf_modify_return_test.
This patch also does some other cleanups such as removing duplicate code,
dropping inconsistent comments, etc.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220519150610.601313-1-ytcoode@gmail.com
This patch verifies the 'first' struct member of struct mptcp_sock, which
points to the first subflow of msk. Save 'sk' in mptcp_storage, and verify
it with 'first' in verify_msk().
v5:
- Use ASSERT_EQ() instead of a manual comparison + log (Andrii).
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-8-mathew.j.martineau@linux.intel.com
This patch verifies another member of struct mptcp_sock, ca_name. Add a
new function get_msk_ca_name() to read the sysctl tcp_congestion_control
and verify it in verify_msk().
v3: Access the sysctl through the filesystem to avoid compatibility
issues with the busybox sysctl command.
v4: use ASSERT_* instead of CHECK_FAIL (Andrii)
v5: use ASSERT_STRNEQ() instead of strncmp() (Andrii)
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-7-mathew.j.martineau@linux.intel.com
This patch verifies the struct member token of struct mptcp_sock. Add a
new member token in struct mptcp_storage to store the token value of the
msk socket got by bpf_skc_to_mptcp_sock(). Trace the kernel function
mptcp_pm_new_connection() by using bpf fentry prog to obtain the msk token
and save it in a global bpf variable. Pass the variable to verify_msk() to
verify it with the token saved in socket_storage_map.
v4:
- use ASSERT_* instead of CHECK_FAIL (Andrii)
- skip the test if 'ip mptcp monitor' is not supported (Mat)
v5:
- Drop 'ip mptcp monitor', trace mptcp_pm_new_connection instead (Martin)
- Use ASSERT_EQ (Andrii)
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-6-mathew.j.martineau@linux.intel.com
This patch extends the MPTCP test base, to test the new helper
bpf_skc_to_mptcp_sock().
Define struct mptcp_sock in bpf_tcp_helpers.h, use bpf_skc_to_mptcp_sock
to get the msk socket in progs/mptcp_sock.c and store the infos in
socket_storage_map.
Get the infos from socket_storage_map in prog_tests/mptcp.c. Add a new
function verify_msk() to verify the infos of MPTCP socket, and rename
verify_sk() to verify_tsk() to verify TCP socket only.
v2: Add CONFIG_MPTCP check for clearer error messages
v4:
- use ASSERT_* instead of CHECK_FAIL (Andrii)
- drop bpf_mptcp_helpers.h (Andrii)
v5:
- some 'ASSERT_*' were replaced in the next commit by mistake.
- Drop CONFIG_MPTCP (Martin)
- Use ASSERT_EQ (Andrii)
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-5-mathew.j.martineau@linux.intel.com
This patch adds a base for MPTCP specific tests.
It is currently limited to the is_mptcp field in case of plain TCP
connection because there is no easy way to get the subflow sk from a msk
in userspace. This implies that we cannot lookup the sk_storage attached
to the subflow sk in the sockops program.
v4:
- add copyright 2022 (Andrii)
- use ASSERT_* instead of CHECK_FAIL (Andrii)
- drop SEC("version") (Andrii)
- use is_mptcp in tcp_sock, instead of bpf_tcp_sock (Martin & Andrii)
v5:
- Drop connect_to_mptcp_fd (Martin)
- Use BPF test skeleton (Andrii)
- Use ASSERT_EQ (Andrii)
- Drop the 'msg' parameter of verify_sk
Co-developed-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-4-mathew.j.martineau@linux.intel.com
CONFIG_IKCONFIG_PROC is required by BPF selftests, otherwise we get
errors like this:
libbpf: failed to open system Kconfig
libbpf: failed to load object 'kprobe_multi'
libbpf: failed to load BPF skeleton 'kprobe_multi': -22
It's because /proc/config.gz is opened in bpf_object__read_kconfig_file()
in tools/lib/bpf/libbpf.c:
file = gzopen("/proc/config.gz", "r");
So this patch enables CONFIG_IKCONFIG and CONFIG_IKCONFIG_PROC in
tools/testing/selftests/bpf/config.
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220519233016.105670-3-mathew.j.martineau@linux.intel.com
comments from Andrii Nakryiko, details in here:
https://lore.kernel.org/lkml/20220511093854.411-1-zhoufeng.zf@bytedance.com/T/
use /* */ instead of //
use libbpf_num_possible_cpus() instead of sysconf(_SC_NPROCESSORS_ONLN)
use 8 bytes for value size
fix memory leak
use ASSERT_EQ instead of ASSERT_OK
add bpf_loop to fetch values on each possible CPU
Fixes: ed7c13776e ("selftests/bpf: add test case for bpf_map_lookup_percpu_elem")
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220518025053.20492-1-zhoufeng.zf@bytedance.com
Check that suppression is not indicated on injection of a key checked
protection exception caused by a memop after it already modified guest
memory, as that violates the definition of suppression.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220512131019.2594948-3-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Adds some selftests to test ioctl error paths of the uv-uapi.
The Kconfig S390_UV_UAPI must be selected and the Ultravisor facility
must be available. The test can be executed by non-root, however, the
uvdevice special file /dev/uv must be accessible for reading and
writing which may imply root privileges.
./test-uv-device
TAP version 13
1..6
# Starting 6 tests from 3 test cases.
# RUN uvio_fixture.att.fault_ioctl_arg ...
# OK uvio_fixture.att.fault_ioctl_arg
ok 1 uvio_fixture.att.fault_ioctl_arg
# RUN uvio_fixture.att.fault_uvio_arg ...
# OK uvio_fixture.att.fault_uvio_arg
ok 2 uvio_fixture.att.fault_uvio_arg
# RUN uvio_fixture.att.inval_ioctl_cb ...
# OK uvio_fixture.att.inval_ioctl_cb
ok 3 uvio_fixture.att.inval_ioctl_cb
# RUN uvio_fixture.att.inval_ioctl_cmd ...
# OK uvio_fixture.att.inval_ioctl_cmd
ok 4 uvio_fixture.att.inval_ioctl_cmd
# RUN attest_fixture.att_inval_request ...
# OK attest_fixture.att_inval_request
ok 5 attest_fixture.att_inval_request
# RUN attest_fixture.att_inval_addr ...
# OK attest_fixture.att_inval_addr
ok 6 attest_fixture.att_inval_addr
# PASSED: 6 / 6 tests passed.
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20220510144724.3321985-3-seiden@linux.ibm.com>
Link: https://lore.kernel.org/kvm/20220510144724.3321985-3-seiden@linux.ibm.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Add a test to demonstrate that when the guest programs an event select
it is matched correctly in the pmu event filter and not inadvertently
filtered. This could happen on AMD if the high nybble[1] in the event
select gets truncated away only leaving the bottom byte[2] left for
matching.
This is a contrived example used for the convenience of demonstrating
this issue, however, this can be applied to event selects 0x28A (OC
Mode Switch) and 0x08A (L1 BTB Correction), where 0x08A could end up
being denied when the event select was only set up to deny 0x28A.
[1] bits 35:32 in the event select register and bits 11:8 in the event
select.
[2] bits 7:0 in the event select register and bits 7:0 in the event
select.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220517051238.2566934-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper function that creates a pmu event filter given an event
list. Currently, a pmu event filter can only be created with the same
hard coded event list. Add a way to create one given a different event
list.
Also, rename make_pmu_event_filter to alloc_pmu_event_filter to clarify
it's purpose given the introduction of create_pmu_event_filter.
No functional changes intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220517051238.2566934-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, we simply hang using "while (1) ;" upon any unexpected
guest traps because the default guest trap handler is guest_hang().
The above approach is not useful to anyone because KVM selftests
users will only see a hung application upon any unexpected guest
trap.
This patch improves unexpected guest trap handling for KVM RISC-V
selftests by doing the following:
1) Return to host user-space
2) Dump VCPU registers
3) Die using TEST_ASSERT(0, ...)
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add the multiple subflows test case for MP_FAIL, to test the MP_FAIL
reset case. Use the test_linkfail value to make 1024KB test files.
Invoke reset_with_fail() to use 'iptables' and 'tc action pedit' rules
to produce the bit flips to trigger the checksum failures on ns2eth2.
Add delays on ns2eth1 to make sure more data can translate on ns2eth2.
The check_invert flag is enabled in reset_with_fail(), so this test
prints out the inverted bytes, instead of the file mismatch errors.
Invoke pedit_action_pkts() to get the numbers of the packets edited
by the tc pedit actions, and print this numbers to the output.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The port driver maps component registers for port operations. Reuse that
mapping for HDM Decoder Capability setup / enable. Move
devm_cxl_setup_hdm() before cxl_hdm_decode_init() and plumb @cxlhdm
through the hdm init helpers.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165291691712.1426646.14336397551571515480.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that nothing external to cxl_hdm_decode_init() considers
'struct cxl_endpoint_dvec_info' move it internal to
cxl_hdm_decode_init().
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165291690612.1426646.7866084245521113414.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for changing how the driver handles 'mem_enable' in the CXL
DVSEC control register. Merge the contents of cxl_hdm_decode_init() into
cxl_dvsec_ranges() and rename the combined function cxl_hdm_decode_init().
The possible cleanups and fixes that result from this merge are saved for a
follow-on change.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/165291690027.1426646.10249756632415633752.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for fixing the setting of the 'mem_enabled' bit in CXL
DVSEC Control register, move all CXL DVSEC range enumeration into the
same source file.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165291688886.1426646.15046138604010482084.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Allow cxl_await_media_ready() to be mocked for testing purposes rather
than carrying the maintenance burden of an indirect function call in the
mainline driver.
With the move cxl_await_media_ready() can no longer reuse the mailbox
timeout override, so add a media_ready_timeout module parameter to the
core to backfill.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165291688340.1426646.4755627801983775011.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
netfilter subtrees.
Notably this reverts a recent TCP/DCCP netns-related change
to address a possible UaF.
Current release - regressions:
- tcp: revert "tcp/dccp: get rid of inet_twsk_purge()"
- xfrm: set dst dev to blackhole_netdev instead of loopback_dev in ifdown
Previous releases - regressions:
- netfilter: flowtable: fix TCP flow teardown
- can: revert "can: m_can: pci: use custom bit timings for Elkhart Lake"
- xfrm: check encryption module availability consistency
- eth: vmxnet3: fix possible use-after-free bugs in vmxnet3_rq_alloc_rx_buf()
- eth: mlx5: initialize flow steering during driver probe
- eth: ice: fix crash when writing timestamp on RX rings
Previous releases - always broken:
- mptcp: fix checksum byte order
- eth: lan966x: fix assignment of the MAC address
- eth: mlx5: remove HW-GRO from reported features
- eth: ftgmac100: disable hardware checksum on AST2600
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=C848
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, xfrm and netfilter subtrees.
Notably this reverts a recent TCP/DCCP netns-related change to address
a possible UaF.
Current release - regressions:
- tcp: revert "tcp/dccp: get rid of inet_twsk_purge()"
- xfrm: set dst dev to blackhole_netdev instead of loopback_dev in
ifdown
Previous releases - regressions:
- netfilter: flowtable: fix TCP flow teardown
- can: revert "can: m_can: pci: use custom bit timings for Elkhart
Lake"
- xfrm: check encryption module availability consistency
- eth: vmxnet3: fix possible use-after-free bugs in
vmxnet3_rq_alloc_rx_buf()
- eth: mlx5: initialize flow steering during driver probe
- eth: ice: fix crash when writing timestamp on RX rings
Previous releases - always broken:
- mptcp: fix checksum byte order
- eth: lan966x: fix assignment of the MAC address
- eth: mlx5: remove HW-GRO from reported features
- eth: ftgmac100: disable hardware checksum on AST2600"
* tag 'net-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.
ptp: ocp: change sysfs attr group handling
selftests: forwarding: fix missing backslash
netfilter: nf_tables: disable expression reduction infra
netfilter: flowtable: move dst_check to packet path
netfilter: flowtable: fix TCP flow teardown
net: ftgmac100: Disable hardware checksum on AST2600
igb: skip phy status check where unavailable
nfc: pn533: Fix buggy cleanup order
mptcp: Do TCP fallback on early DSS checksum failure
mptcp: fix checksum byte order
net: af_key: check encryption module availability consistency
net: af_key: add check for pfkey_broadcast in function pfkey_process
net/mlx5: Drain fw_reset when removing device
net/mlx5e: CT: Fix setting flow_source for smfs ct tuples
net/mlx5e: CT: Fix support for GRE tuples
net/mlx5e: Remove HW-GRO from reported features
net/mlx5e: Properly block HW GRO when XDP is enabled
net/mlx5e: Properly block LRO when XDP is enabled
net/mlx5e: Block rx-gro-hw feature in switchdev mode
...
- Test for new usercopy memory regions
- avoid GCC 12 warnings
- update expected CONFIGs for selftests
-----BEGIN PGP SIGNATURE-----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=CiSx
-----END PGP SIGNATURE-----
Merge tag 'lkdtm-next' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-next
Kees writes:
lkdtm updates for -next
- Test for new usercopy memory regions
- avoid GCC 12 warnings
- update expected CONFIGs for selftests
* tag 'lkdtm-next' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/heap: Hide allocation size from -Warray-bounds
selftests/lkdtm: Add configs for stackleak and "after free" tests
lkdtm/usercopy: Check vmalloc and >0-order folios
lkdtm/usercopy: Rename "heap" to "slab"
lkdtm: cfi: Fix type width for masking PAC bits
Fix missing backslash, introduced in f62c5acc80. Causes all tests to
not be installed.
Fixes: f62c5acc80 ("selftests/net/forwarding: add missing tests to Makefile")
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20220518151630.2747773-1-troglobit@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When build bpf test and install it to another folder, e.g.
make -j10 install -C tools/testing/selftests/ TARGETS="bpf" \
SKIP_TARGETS="" INSTALL_PATH=/tmp/kselftests
The ima_setup.sh is missed in target folder, which makes test_ima failed.
Fix it by adding ima_setup.sh to TEST_PROGS_EXTENDED.
Fixes: 34b82d3ac1 ("bpf: Add a selftest for bpf_ima_inode_hash")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220516040020.653291-1-liuhangbin@gmail.com
We're currently using the x86_64 qemu for i386 builds. While this is not
incorrect, it's probably more sensible to use the i386 one, which will
at least fail properly if we accidentally were to build a 64-bit kernel.
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
hw_stats_l3.sh test is failing often for l3 stats shows less than 20
packets after 2 seconds sleep.
This is happening since there is a race between the 2 seconds sleep and
the netdevsim actually delivering the packets.
Increase the sleep time so the packets will be delivered successfully on
time.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add config options which are needed for LKDTM sub-tests:
STACKLEAK_ERASING test needs GCC_PLUGIN_STACKLEAK config.
READ_AFTER_FREE and READ_BUDDY_AFTER_FREE tests need
INIT_ON_FREE_DEFAULT_ON config.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220517132932.1484719-1-usama.anjum@collabora.com
bpf selftests can no longer be built with CFLAGS=-static with
liburandom_read.so and its dependent target.
Filter out -static for liburandom_read.so and its dependent target.
When building statically, this leaves urandom_read relying on
system-wide shared libraries.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220514002115.1376033-1-yosryahmed@google.com
Up till now, dax_direct_access() is used implicitly for normal
access, but for the purpose of recovery write, dax range with
poison is requested. To make the interface clear, introduce
enum dax_access_mode {
DAX_ACCESS,
DAX_RECOVERY_WRITE,
}
where DAX_ACCESS is used for normal dax access, and
DAX_RECOVERY_WRITE is used for dax recovery write.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/165247982851.52965.11024212198889762949.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Old tc versions (iproute2 5.3) show actions in multiple lines, not a
single line. Then the following unexpected MP_FAIL selftest output
occurs:
file received by server has inverted byte at 169
./mptcp_join.sh: line 1277: [: [{"total acts":1},{"actions":[{"order":0 pedit ,"control_action":{"type":"pipe"}keys 1
index 1 ref 1 bind 1,"installed":0,"last_used":0
key #0 at 148: val ff000000 mask ffffffff
5: integer expression expected
001 Infinite map syn[ ok ] - synack[ ok ] - ack[ ok ]
sum[ ok ] - csum [ ok ]
ftx[ ok ] - failrx[ ok ]
rtx[ ok ] - rstrx [ ok ]
itx[ ok ] - infirx[ ok ]
ftx[ ok ] - failrx[ ok ] invert
This patch adds a 'grep' before 'sed' to fix this.
Fixes: b6e074e171 ("selftests: mptcp: add infinite map testcase")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve the readability of error message which says module not found.
The new behaviour is consistent with the modprobe command.
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The config for the serial console for riscv,
CONFIG_SERIAL_EARLYCON_RISCV_SBI, added a dependency,
CONFIG_RISCV_SBI_V01, at some point, so add that in to the base arch
config.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It's often desirable (particularly in test automation) to run as many
tests as possible. This config enables all the tests which work as
builtins under UML at present, increasing the total tests run from 156
to 342 (not counting 36 'skipped' tests).
They can be run with:
./tools/testing/kunit/kunit.py run
--kunitconfig=./tools/testing/kunit/configs/all_tests_uml.config
This acts as an in-between point between the KUNIT_ALL_TESTS config
(which enables only tests whose dependencies are already enabled), and
the kunit_tool --alltests option, which tries to use allyesconfig,
taking a very long time to build and breaking very often.
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This primarily comes from running pylint over kunit tool code and
ignoring some warnings we don't care about.
If we ever got a fully clean setup, we could add this to run_checks.py,
but we're not there yet.
Fix things like
* Drop unused imports
* check `is None`, not `== None` (see PEP 8)
* remove redundant parens around returns
* remove redundant `else` / convert `elif` to `if` where appropriate
* rename make_arch_qemuconfig() param to base_kunitconfig (this is the
name used in the subclass, and it's a better one)
* kunit_tool_test: check the exit code for SystemExit (could be 0)
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There should be no behavioral changes from this patch.
This patch removes redundant comment text, inlines a function used in
only one place, and other such minor tweaks.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Consider this invocation
$ ./tools/testing/kunit/kunit.py parse <<EOF
TAP version 14
1..2
ok 1 - suite
# Subtest: no_tests_suite
# catastrophic error!
not ok 1 - no_tests_suite
EOF
It will have a 0 exit code even though there's a "not ok".
Consider this one:
$ ./tools/testing/kunit/kunit.py parse <<EOF
TAP version 14
1..2
ok 1 - suite
not ok 1 - no_tests_suite
EOF
It will a non-zero exit code.
Why?
We have this line in the kunit_parser.py
> parent_test = parse_test_header(lines, test)
where we have special handling when we see "# Subtest" and we ignore the
explicit reported "not ok 1" status!
Also, NO_TESTS at a suite-level only results in a non-zero status code
where then there's only one suite atm.
This change is the minimal one to make sure we don't overwrite it.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This logic depends on the kernel logging a message containing
'kunit test case crashed', but there is no corresponding logic to do so.
This is likely a relic of the revision process KUnit initially went
through when being upstreamed.
Delete it given
1) it's been missing for years and likely won't get implemented
2) the parser has been moving to be a more general KTAP parser,
kunit-only magic like this isn't how we'd want to implement it.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In case a distribution enables branch protection by default do as we do for
the main kernel and explicitly disable branch protection when building the
test case for having BTI disabled to ensure it doesn't get turned on by the
toolchain defaults.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220516182213.727589-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The "bti" selftests are built with -nostdlib, which apparently
automatically creates a statically linked binary, which is what we want
and need for BTI (to avoid interactions with the dynamic linker).
However this is not true when building a PIE binary, which some
toolchains (Ubuntu) configure as the default.
When compiling btitest with such a toolchain, it will create a
dynamically linked binary, which will probably fail some tests, as the
dynamic linker might not support BTI:
===================
TAP version 13
1..18
not ok 1 nohint_func/call_using_br_x0
not ok 2 nohint_func/call_using_br_x16
not ok 3 nohint_func/call_using_blr
....
===================
To make sure we create static binaries, add an explicit -static on the
linker command line. This forces static linking even if the toolchain
defaults to PIE builds, and fixes btitest runs on BTI enabled machines.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Fixes: 314bcbf09f ("kselftest: arm64: Add BTI tests")
Link: https://lore.kernel.org/r/20220511172129.2078337-1-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* kvm-arm64/psci-suspend:
: .
: Add support for PSCI SYSTEM_SUSPEND and allow userspace to
: filter the wake-up events.
:
: Patches courtesy of Oliver.
: .
Documentation: KVM: Fix title level for PSCI_SUSPEND
selftests: KVM: Test SYSTEM_SUSPEND PSCI call
selftests: KVM: Refactor psci_test to make it amenable to new tests
selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
KVM: arm64: Implement PSCI SYSTEM_SUSPEND
KVM: arm64: Add support for userspace to suspend a vCPU
KVM: arm64: Return a value from check_vcpu_requests()
KVM: arm64: Rename the KVM_REQ_SLEEP handler
KVM: arm64: Track vCPU power state using MP state values
KVM: arm64: Dedupe vCPU power off helpers
KVM: arm64: Don't depend on fallthrough to hide SYSTEM_RESET2
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/hcall-selection:
: .
: Introduce a new set of virtual sysregs for userspace to
: select the hypercalls it wants to see exposed to the guest.
:
: Patches courtesy of Raghavendra and Oliver.
: .
KVM: arm64: Fix hypercall bitmap writeback when vcpus have already run
KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace
Documentation: Fix index.rst after psci.rst renaming
selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-list
selftests: KVM: aarch64: Introduce hypercall ABI test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
tools: Import ARM SMCCC definitions
Docs: KVM: Add doc for the bitmap firmware registers
Docs: KVM: Rename psci.rst to hypercalls.rst
KVM: arm64: Add vendor hypervisor firmware register
KVM: arm64: Add standard hypervisor firmware register
KVM: arm64: Setup a framework for hypercall bitmap firmware registers
KVM: arm64: Factor out firmware register handling from psci.c
Signed-off-by: Marc Zyngier <maz@kernel.org>
In the MTE tests there are several places where we use chains of if
statements to open code what could be written as switch statements, move
over to switch statements to make the idiom clearer.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220510164520.768783-6-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Void pointers may be freely used with other pointer types in C, any casts
between void * and other pointer types serve no purpose other than to
mask potential warnings. Drop such casts from check_tags_inclusion to
help with future review of the code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The MTE check_tags_inclusion test uses the mte_switch_mode() helper but
ignores the return values it generates meaning we might not be testing
the things we're trying to test, fail the test if it reports an error.
The helper will log any errors it returns.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
mte_switch_mode() currently rejects attempts to set a zero tag however
there are tests such as check_tags_inclusion which attempt to cover cases
with zero tags using mte_switch_mode(). Since it is not clear why we are
rejecting zero tags change the test to accept them.
The issue has not previously been as apparent as it should be since the
return value of mte_switch_mode() was not always checked in the callers
and the tests weren't otherwise failing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When we detect a problem in verify_mte_pointer_validity() while checking
tags we don't log what the problem was which makes debugging harder. Add
some diagnostics.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add and delete a bunch of endpoints and verify the
respect of configured limits.
This covers the codepath introduced by the previous patch.
Fixes: 69c6ce7b6e ("selftests: mptcp: add implicit endpoint test case")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
usdt_400 test case relies on compiler using the same arg spec for
usdt_400 USDT. This assumption breaks with Clang (Clang generates
different arg specs with varying offsets relative to %rbp), so simplify
this further and hard-code the constant which will guarantee that arg
spec is the same across all 400 inlinings.
Fixes: 630301b0d5 ("selftests/bpf: Add basic USDT selftests")
Reported-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220513173703.89271-1-andrii@kernel.org
Commit 54de76c012 ("kselftest/cgroup: fix test_stress.sh to use OUTPUT
dir") changes the test_core command path from . to $OUTPUT. However,
variable OUTPUT may not be defined if the command is run interactively.
Fix that by using ${OUTPUT:-.} to cover both cases.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYnvwxgAKCRDdBJ7gKXxA
jhymAQDvHnFT3F5ydvBqApbzrQRUk/+fkkQSrF/xYawknZNgkAEA6Tnh9XqYplJN
bbmml6HTVvDjprEOCGakY/Kyz7qmdQ0=
=SMJQ
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Seven MM fixes, three of which address issues added in the most recent
merge window, four of which are cc:stable.
Three non-MM fixes, none very serious"
[ And yes, that's a real pull request from Andrew, not me creating a
branch from emailed patches. Woo-hoo! ]
* tag 'mm-hotfixes-stable-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add a mailing list for DAMON development
selftests: vm: Makefile: rename TARGETS to VMTARGETS
mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool
mailmap: add entry for martyna.szapar-mudlaw@intel.com
arm[64]/memremap: don't abuse pfn_valid() to ensure presence of linear map
procfs: prevent unprivileged processes accessing fdinfo dir
mm: mremap: fix sign for EFAULT error return value
mm/hwpoison: use pr_err() instead of dump_page() in get_any_page()
mm/huge_memory: do not overkill when splitting huge_zero_page
Revert "mm/memory-failure.c: skip huge_zero_page in memory_failure()"
alloc_pagecache_max_30M() in the cgroup memcg tests performs a 50MB
pagecache allocation, which it expects to be capped at 30MB due to the
calling process having a memory.high setting of 30MB. After the
allocation, the function contains a check that verifies that MB(29) <
memory.current <= MB(30). This check can actually fail
non-deterministically.
The testcases that use this function are test_memcg_high() and
test_memcg_max(), which set memory.min and memory.max to 30MB respectively
for the cgroup under test. The allocation can slightly exceed this number
in both cases, and for memory.max, the process performing the allocation
will not have the OOM killer invoked as it's performing a pagecache
allocation. This patchset therefore updates the above check to instead
use the verify_close() helper function.
Link: https://lkml.kernel.org/r/20220423155619.3669555-6-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
test_memcg_sock() in the cgroup memcg tests, verifies expected memory
accounting for sockets. The test forks a process which functions as a TCP
server, and sends large buffers back and forth between itself (as the TCP
client) and the forked TCP server. While doing so, it verifies that
memory.current and memory.stat.sock look correct.
There is currently a check in tcp_client() which asserts memory.current >=
memory.stat.sock. This check is racy, as between memory.current and
memory.stat.sock being queried, a packet could come in which causes
mem_cgroup_charge_skmem() to be invoked. This could cause
memory.stat.sock to exceed memory.current. Reversing the order of
querying doesn't address the problem either, as memory may be reclaimed
between the two calls. Instead, this patch just removes that assertion
altogether, and instead relies on the values_close() check that follows to
validate the expected accounting.
Link: https://lkml.kernel.org/r/20220423155619.3669555-5-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test_memcg_oom_group_leaf_events() testcase in the cgroup memcg tests
validates that processes in a group that perform allocations exceeding
memory.oom.group are killed. It also validates that the
memory.events.oom_kill events are properly propagated in this case.
Commit 06e11c907ea4 ("kselftests: memcg: update the oom group leaf events
test") fixed test_memcg_oom_group_leaf_events() to account for the fact
that the memory.events.oom_kill events in a child cgroup is propagated up
to its parent. This behavior can actually be configured by the
memory_localevents mount option, so this patch updates the testcase to
properly account for the possible presence of this mount option.
Link: https://lkml.kernel.org/r/20220423155619.3669555-4-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test_memcg_low() testcase in test_memcontrol.c verifies the expected
behavior of groups using the memory.low knob. Part of the testcase
verifies that a group with memory.low that experiences reclaim due to
memory pressure elsewhere in the system, observes memory.events.low events
as a result of that reclaim.
In commit 8a931f8013 ("mm: memcontrol: recursive memory.low
protection"), the memory controller was updated to propagate memory.low
and memory.min protection from a parent group to its children via a
configurable memory_recursiveprot mount option. This unfortunately broke
the memcg tests, which asserts that a sibling that experienced reclaim but
had a memory.low value of 0, would not observe any memory.low events.
This patch updates test_memcg_low() to account for the new behavior
introduced by memory_recursiveprot.
So as to make the test resilient to multiple configurations, the patch
also adds a new proc_mount_contains() helper that checks for a string in
/proc/mounts, and is used to toggle behavior based on whether the default
memory_recursiveprot was present.
Link: https://lkml.kernel.org/r/20220423155619.3669555-3-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix bugs in memcontroller cgroup tests", v2.
tools/testing/selftests/cgroup/test_memcontrol.c contains a set of
testcases which validate expected behavior of the cgroup memory
controller. Roman Gushchin recently sent out a patchset that fixed a few
issues in the test. This patchset continues that effort by fixing a few
more issues that were causing non-deterministic failures in the suite.
With this patchset, I'm unable to reproduce any more errors after running
the tests in a continuous loop for many iterations. Before, I was able to
reproduce at least one of the errors fixed in this patchset with just one
or two runs.
This patch (of 5):
In test_memcg_min() and test_memcg_low(), there is an array of four
sibling cgroups. All but one of these sibling groups does a 50MB
allocation, and the group that does no allocation is the third of four in
the array. This is not a problem per se, but makes it a bit tricky to do
some assertions in test_memcg_low(), as we want to make assertions on the
siblings based on whether or not they performed allocations. Having a
static index before which all groups have performed an allocation makes
this cleaner.
This patch therefore reorders the sibling groups so that the group that
performs no allocations is the last in the array. A follow-on patch will
leverage this to fix a bug in the test that incorrectly asserts that a
sibling group that had performed an allocation, but only had protection
from its parent, will not observe any memory.events.low events during
reclaim.
Link: https://lkml.kernel.org/r/20220423155619.3669555-1-void@manifault.com
Link: https://lkml.kernel.org/r/20220423155619.3669555-2-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Address the following coccicheck warning:
tools/testing/selftests/vm/userfaultfd.c:1536:21-22: WARNING opportunity
for swap().
tools/testing/selftests/vm/userfaultfd.c:1540:33-34: WARNING opportunity
for swap().
by using swap() for the swapping of variable values and drop
`tmp_area` that is not needed any more.
`swap()` macro in userfaultfd.c is introduced in commit 681696862b
("selftests: vm: remove dependecy from internal kernel macros")
It has been tested with gcc (Debian 8.3.0-6) 8.3.0.
Link: https://lkml.kernel.org/r/20220407123141.4998-1-guozhengkui@vivo.com
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After we added support for shmem and hugetlbfs, we can turn uffd-wp test
on always now.
Link: https://lkml.kernel.org/r/20220405014932.15212-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a regression test that validates that mremap fails for vma's that
don't exist.
Link: https://lkml.kernel.org/r/20220427224439.23828-3-dossche.niels@gmail.com
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit adds a selftest test case for ensuring the existence and the
permission (read-only) of the 'avail_oprations' DAMON sysfs file.
Link: https://lkml.kernel.org/r/20220426203843.45238-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert a bunch of selftests to using newly added high-level BPF map
APIs.
This change exposed that map_kptr selftests allocated too big buffer,
which is fixed in this patch as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220512220713.2617964-2-andrii@kernel.org
Check that ld_imm64 with src_reg=1 (aka BPF_PSEUDO_FUNC) works
with jit_blinding.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220513011025.13344-2-alexei.starovoitov@gmail.com
Rarely some of the test cases fail. Make the test more robust by increasing
the timeout of ping commands to 5 seconds.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement a crypto library interface for the s390-native ChaCha20 cipher
algorithm. This allows us to stop to select CRYPTO_CHACHA20 and instead
select CRYPTO_ARCH_HAVE_LIB_CHACHA. This allows BIG_KEYS=y not to build
a whole ChaCha20 crypto infrastructure as a built-in, but build a smaller
CRYPTO_LIB_CHACHA instead.
Make CRYPTO_CHACHA_S390 config entry to look like similar ones on other
architectures. Remove CRYPTO_ALGAPI select as anyway it is selected by
CRYPTO_SKCIPHER.
Add a new test module and a test script for ChaCha20 cipher and its
interfaces. Here are test results on an idle z15 machine:
Data | Generic crypto TFM | s390 crypto TFM | s390 lib
size | enc dec | enc dec | enc dec
-----+--------------------+------------------+----------------
512b | 1545ns 1295ns | 604ns 446ns | 430ns 407ns
4k | 9536ns 9463ns | 2329ns 2174ns | 2170ns 2154ns
64k | 149.6us 149.3us | 34.4us 34.5us | 33.9us 33.1us
6M | 23.61ms 23.11ms | 4223us 4160us | 3951us 4008us
60M | 143.9ms 143.9ms | 33.5ms 33.2ms | 32.2ms 32.1ms
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a test that has 300 VIPs listening on port 443.
Each VIP:443 will have 80 listening socks by using SO_REUSEPORT.
Thus, it will have 24000 listening socks.
Before removing the port only listening_hash, all socks will be in the
same port 443 bucket and inet_reuseport_add_sock() spends much time to
walk through the bucket. After removing the port only listening_hash
and move all usage to the port+addr lhash2, each bucket in the
ideal case has 80 sk which is much smaller than before.
Here is the test result from a qemu:
Before: listen 24000 socks took 210.210485362 (~210s)
After: listen 24000 socks took 0.207173 (~210ms)
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before:
$ ./tools/testing/kunit/kunit.py parse /dev/null
...
[ERROR] Test : invalid KTAP input!
After:
$ ./tools/testing/kunit/kunit.py parse /dev/null
...
[ERROR] Test <missing>: could not find any KTAP output!
This error message gets printed out when extract_tap_output() yielded no
lines. So while it could be because of malformed KTAP output from KUnit,
it could also be due to not having any KTAP output at all.
Try and make the error message here more clear.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Note: this potentially breaks custom qemu_configs if people are using
them! But the fix for them is simple, don't specify multiple arguments
in one string and don't add on a redundant ''.
It feels a bit iffy to be using a shell in the first place.
There's the usual shenanigans where people could pass in arbitrary shell
commands via --kernel_arg (since we're just adding '' around the
kernel_cmdline) or via a custom qemu_config.
This isn't too much of a concern given the nature of this script (and
the qemu_config file is in python, you can do w/e you want already).
But it does have some other drawbacks.
One example of a kunit-specific pain point:
If the relevant qemu binary is missing, we get output like this:
> /bin/sh: line 1: qemu-system-aarch64: command not found
This in turn results in our KTAP parser complaining about
missing/invalid KTAP, but we don't directly show the error!
It's even more annoying to debug when you consider --raw_output only
shows KUnit output by default, i.e. you need --raw_output=all to see it.
Whereas directly invoking the binary, Python will raise a
FileNotFoundError for us, which is a noisier but more clear.
Making this change requires
* splitting parameters like ['-m 256'] into ['-m', '256'] in
kunit/qemu_configs/*.py
* change [''] to [] in kunit/qemu_configs/*.py since otherwise
QEMU fails w/ 'Device needs media, but drive is empty'
* dropping explicit quoting of the kernel cmdline
* using shlex.quote() when we print what command we're running
so the user can copy-paste and run it
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Before:
> Testing complete. Passed: 137, Failed: 0, Crashed: 0, Skipped: 36, Errors: 0
After:
> Testing complete. Ran 173 tests: passed: 137, skipped: 36
Even with our current set of statuses, the output is a bit verbose.
It could get worse in the future if we add more (e.g. timeout, kasan).
Let's only print the relevant ones.
I had previously been sympathetic to the argument that always
printing out all the statuses would make it easier to parse results.
But now we have commit acd8e8407b ("kunit: Print test statistics on
failure"), there are test counts printed out in the raw output.
We don't currently print out an overall total across all suites, but it
would be easy to add, if we see a need for that.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Running cgroup kselftest with O= fails to run the with_stress test due
to hardcoded ./test_core. Find test_core binary using the OUTPUT directory.
Fixes: 1a99fcc035 ("selftests: cgroup: Run test_core under interfering stress")
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
It may lead to kernel panic when execute the following testcase on mips:
# cd tools/testing/selftests/ftrace
# ./ftracetest test.d/kprobe/multiple_kprobes.tc
A preliminary analysis shows that the issue is related with
echo 1 > events/kprobes/enable
after add the 256 probe points.
In order to find the root cause, I want to verify which probe point has
problem, so it is necessary to save kprobe_events to test log.
With this patch, we can get the 256 probe points in the test log through
the following command:
# ./ftracetest test.d/kprobe/multiple_kprobes.tc -vvv -k
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
To more clearly distinguish between the various heap types, rename the
slab tests to "slab".
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
fexit_stress is attaching maximum allowed amount of fexit programs to
bpf_fentry_test1 kernel function, which is used by a bunch of other
parallel tests, thus pretty frequently interfering with their execution.
Given the test assumes nothing else is attaching to bpf_fentry_test1,
mark it serial.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220511232012.609370-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Check at runtime how various operations for kptr_ref affect its refcount
and verify against the actual count.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220511194654.765705-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This uses the newly added SEC("?foo") naming to disable autoload of
programs, and then loads them one by one for the object and verifies
that loading fails and matches the returned error string from verifier.
This is similar to already existing verifier tests but provides coverage
for BPF C.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220511194654.765705-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In an effort to actually test the refcounting logic at runtime, add a
refcount_t member to prog_test_ref_kfunc and use it in selftests to
verify and test the whole logic more exhaustively.
The kfunc calls for prog_test_member do not require runtime refcounting,
as they are only used for verifier selftests, not during runtime
execution. Hence, their implementation now has a WARN_ON_ONCE as it is
not meant to be reachable code at runtime. It is strictly used in tests
triggering failure cases in the verifier. bpf_kfunc_call_memb_release is
called from map free path, since prog_test_member is embedded in map
value for some verifier tests, so we skip WARN_ON_ONCE for it.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220511194654.765705-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The host interfaces $h1 and $h2 don't have to be switchdev interfaces,
but due to the fact that we pass $tcflags which may have the value of
"skip_sw", we force $h2 to offload a drop rule for dst_ip, something
which it may not be able to do.
The selftest only wants to verify the hit count of this rule as a means
of figuring out whether the packet was received, so remove the $tcflags
for it and let it be done in software.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220510220904.284552-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With latest clang, I got the following compilation errors:
.../prog_tests/test_tunnel.c:291:6: error: variable 'local_ip_map_fd' is used uninitialized
whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (attach_tc_prog(&tc_hook, -1, set_dst_prog_fd))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../bpf/prog_tests/test_tunnel.c:312:6: note: uninitialized use occurs here
if (local_ip_map_fd >= 0)
^~~~~~~~~~~~~~~
...
.../prog_tests/kprobe_multi_test.c:346:6: error: variable 'err' is used uninitialized
whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (IS_ERR(map))
^~~~~~~~~~~
.../prog_tests/kprobe_multi_test.c:388:6: note: uninitialized use occurs here
if (err) {
^~~
This patch fixed the above compilation errors.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20220511184735.3670214-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some of the BPF selftests are failing when running with a rather bare
bones configuration based on tools/testing/selftests/bpf/config.
Specifically, we see a bunch of failures due to errno 95:
> test_attach_api:PASS:fentry_raw_skel_load 0 nsec
> libbpf: prog 'test_kprobe_manual': failed to attach: Operation not supported
> test_attach_api:FAIL:bpf_program__attach_kprobe_multi_opts unexpected error: -95
> 79 /6 kprobe_multi_test/attach_api_syms:FAIL
The cause of these is that CONFIG_FPROBE is missing. With this change we
add this configuration value to the BPF selftests config.
Signed-off-by: Daniel Müller <deso@posteo.net>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20220511172249.4082510-1-deso@posteo.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert the stats tests from spinning on the getsockopt to just check
getsockopt once when the Rx thread has received all the packets. The
actual completion of receiving the last packet forms a natural point
in time when the receiver is ready to call the getsockopt to check the
stats. In the previous version , we just span on the getsockopt until
we received the right answer. This could be forever or just getting
the "correct" answer by shear luck.
The pacing_on variable can now be dropped since all test can now
handle pacing properly.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make the stats tests look and feel just like normal tests instead of
bunched under the umbrella of TEST_STATS. This means we will always
run each of them even if one fails. Also gets rid of some special case
code.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce validation functions that can be optionally called by the Rx
and Tx threads. These are then used to replace the Rx and Tx stats
dispatchers. This so that we in the next commit can make the stats
tests proper normal tests and not be some special case, as today.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove the veth pair when the tests are aborted by pressing
ctrl-c. Currently in this situation, the veth pair is left on the
system polluting the netdev space.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-7-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a timeout to the tests so that if all packets have not been
received within 3 seconds, fail the ongoing test. Hinders a test from
dead-locking if there is something wrong.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-6-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix the reporting of failed tests as it was broken in several
ways. First, a failed test was reported as both failed and passed
messing up the count. Second, tests were not aborted after a failure
and could generate more "failures" messing up the count even
more. Third, the failure reporting from the application to the shell
script was wrong. It always reported pass. And finally, the handling
of the failures in the launch script was not correct.
Correct all this by propagating the failure up through the function
calls to a calling function that can abort the test. A receiver or
sender thread will mark the new variable in the test spec called fail,
if a test has failed. This is then picked up by the main thread when
everyone else has exited and this is then marked and propagated up to
the calling script.
Also add a summary function in the calling script so that a user
does not have to go through the sub tests to see if something has
failed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Execute all xsk selftests for busy-poll mode too. Currently they were
only run for the standard interrupt driven softirq mode. Replace the
unused option queue-id with the new option busy-poll.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Do not try to send packets of zero length since they are dropped by
veth after commit 726e2c5929 ("veth: Ensure eth header is in skb's
linear part"). Replace these two packets with packets of length 60 so
that they are not dropped.
Also clean up the confusing naming. MIN_PKT_SIZE was really
MIN_ETH_PKT_SIZE and PKT_SIZE was both MIN_ETH_SIZE and the default
packet size called just PKT_SIZE. Make it consistent by using the
right define in the right place.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-3-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove the spec-file that is not used any longer from the shell
scripts. Also remove an unused option.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that reads all functions from ftrace available_filter_functions
file and attach them all through kprobe_multi API.
It also prints stats info with -v option, like on my setup:
test_bench_attach: found 48712 functions
test_bench_attach: attached in 1.069s
test_bench_attach: detached in 0.373s
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220510122616.2652285-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace usage of CHECK with a corresponding ASSERT_* macro for bpf_iter
tests. Only done if the final result is equivalent, no changes when
replacement means loosing some information, e.g. from formatting string.
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20220510155233.9815-4-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace bpf_trace_printk with bpf_printk in test_tunnel_kern.c.
function bpf_printk is more easier and useful than bpf_trace_printk.
Signed-off-by: Kaixi Fan <fankaixi.li@bytedance.com>
Link: https://lore.kernel.org/r/20220430074844.69214-4-fankaixi.li@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move vxlan tunnel testcases from test_tunnel.sh to test_progs.
And add vxlan tunnel source testcases also. Other tunnel testcases
will be moved to test_progs step by step in the future.
Rename bpf program section name as SEC("tc") because test_progs
bpf loader could not load sections with name SEC("gre_set_tunnel").
Because of this, add bpftool to load bpf programs in test_tunnel.sh.
Signed-off-by: Kaixi Fan <fankaixi.li@bytedance.com>
Link: https://lore.kernel.org/r/20220430074844.69214-3-fankaixi.li@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds up test cases that handles 4 combinations:
a) outer map: BPF_MAP_TYPE_ARRAY_OF_MAPS
inner maps: BPF_MAP_TYPE_ARRAY and BPF_MAP_TYPE_HASH
b) outer map: BPF_MAP_TYPE_HASH_OF_MAPS
inner maps: BPF_MAP_TYPE_ARRAY and BPF_MAP_TYPE_HASH
Signed-off-by: Takshak Chahande <ctakshak@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220510082221.2390540-2-ctakshak@fb.com
The gup_test binary will fail showing only the output of perror("open") in
the case that /sys/kernel/debug/gup_test is not found. This will almost
always be due to CONFIG_GUP_TEST not being set, which enables
compilation of a kernel that provides this file.
Add a short error message to clarify this failure and point the user to
the solution.
Link: https://lkml.kernel.org/r/20220502224942.995427-1-jsavitz@redhat.com
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The tools/testing/selftests/vm/Makefile uses the variable TARGETS
internally to generate a list of platform-specific binary build targets
suffixed with _{32,64}. When building the selftests using its own
Makefile directly, such as via the following command run in a kernel tree:
One receives an error such as the following:
make: Entering directory '/root/linux/tools/testing/selftests'
make --no-builtin-rules ARCH=x86 -C ../../.. headers_install
make[1]: Entering directory '/root/linux'
INSTALL ./usr/include
make[1]: Leaving directory '/root/linux'
make[1]: Entering directory '/root/linux/tools/testing/selftests/vm'
make[1]: *** No rule to make target 'vm.c', needed by '/root/linux/tools/testing/selftests/vm/vm_64'. Stop.
make[1]: Leaving directory '/root/linux/tools/testing/selftests/vm'
make: *** [Makefile:175: all] Error 2
make: Leaving directory '/root/linux/tools/testing/selftests'
The TARGETS variable passed to tools/testing/selftests/Makefile collides
with the TARGETS used in tools/testing/selftests/vm/Makefile, so rename
the latter to VMTARGETS, eliminating the collision with no functional
change.
Link: https://lkml.kernel.org/r/20220504213454.1282532-1-jsavitz@redhat.com
Fixes: f21fda8f64 ("selftests: vm: pkeys: fix multilib builds for x86")
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Acked-by: Nico Pache <npache@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add barrier() and barrier_var() macros into bpf_helpers.h to be used by
end users. While a bit advanced and specialized instruments, they are
sometimes indispensable. Instead of requiring each user to figure out
exact asm volatile incantations for themselves, provide them from
bpf_helpers.h.
Also remove conflicting definitions from selftests. Some tests rely on
barrier_var() definition being nothing, those will still work as libbpf
does the #ifndef/#endif guarding for barrier() and barrier_var(),
allowing users to redefine them, if necessary.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-8-andrii@kernel.org
Excercise both supported forms of bpf_core_field_exists() and
bpf_core_field_size() helpers: variable-based field reference and
type/field name-based one.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-5-andrii@kernel.org
Prevent "classic" and light skeleton generation rules from stomping on
each other's toes due to the use of the same <obj>.linked{1,2,3}.o
naming pattern. There is no coordination and synchronizataion between
.skel.h and .lskel.h rules, so they can easily overwrite each other's
intermediate object files, leading to errors like:
/bin/sh: line 1: 170928 Bus error (core dumped)
/data/users/andriin/linux/tools/testing/selftests/bpf/tools/sbin/bpftool gen skeleton
/data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.linked3.o
name test_ksyms_weak
> /data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h
make: *** [Makefile:507: /data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h] Error 135
make: *** Deleting file '/data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h'
Fix by using different suffix for light skeleton rule.
Fixes: c48e51c8b0 ("bpf: selftests: Add selftests for module kfunc support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-2-andrii@kernel.org
Add extended_error to the binderfs feature list, to help userspace
determine whether the BINDER_GET_EXTENDED_ERROR ioctl is supported by
the binder driver.
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220429235644.697372-4-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a comma after each array value to make clang-format keep the
current array formatting. See the following commit.
Automatically modified with:
sed -i 's/\t\({}\|NULL\)$/\0,/' tools/testing/selftests/landlock/fs_test.c
Link: https://lore.kernel.org/r/20220506160513.523257-5-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
In preparation to a following commit, add clang-format on and
clang-format off stanzas around constant definitions and the TEST_F_FORK
macro. This enables to keep aligned values, which is much more readable
than packed definitions.
Add other clang-format exceptions for FIXTURE() and
FIXTURE_VARIANT_ADD() declarations to force space before open brace,
which is reported by checkpatch.pl .
Link: https://lore.kernel.org/r/20220506160513.523257-4-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Remove completed item from TODO list.
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Update comments in memblock_free_*() functions to match the style used
in tests/alloc_*.c by rewording to make the expected outcome more apparent
and, if more than one memblock is involved, adding a visual of the
memory blocks.
If the comment has an extra column of spaces, remove the extra space at
the beginning of each line for consistency and to conform to Linux kernel
coding style.
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Update comments in memblock_remove_*() functions to match the style used
in tests/alloc_*.c by rewording to make the expected outcome more apparent
and, if more than one memblock is involved, adding a visual of the
memory blocks.
If the comment has an extra column of spaces, remove the extra space at
the beginning of each line for consistency and to conform to Linux kernel
coding style.
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Update comments in memblock_reserve_*() functions to match the style used
in tests/alloc_*.c by rewording to make the expected outcome more apparent
and, if more than one memblock is involved, adding a visual of the
memory blocks.
If the comment has an extra column of spaces, remove the extra space at
the beginning of each line for consistency and to conform to Linux kernel
coding style.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Update comments in memblock_add_*() functions to match the style used
in tests/alloc_*.c by rewording to make the expected outcome more apparent
and, if more than one memblock is involved, adding a visual of the
memory blocks.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
When NET_F_F_GRO_FRAGLIST is enabled and bpf_skb_change_proto is used,
check if udp packets and tcp packets are successfully delivered to user
space. If wrong udp packets are delivered, udpgso_bench_rx will exit
with "Initial byte out of range"
Signed-off-by: Maciej enczykowski <maze@google.com>
Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a selftest that uses an IPIP topology and tests that L3 HW stats
reflect the traffic in the tunnel.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function get_l3_stats() from the test hw_stats_l3.sh will be useful for
any test that wishes to work with L3 stats. Furthermore, it is easy to
generalize to other HW stats suites (for when such are added). Therefore,
move the code to lib.sh, rewrite it to have the same interface as the other
stats-collecting functions, and generalize to take the name of the HW stats
suite to collect as an argument.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'ping' utility is able to manage two kind of sockets (raw or icmp),
depending on the sysctl ping_group_range. By default, ping_group_range is
set to '1 0', which forces ping to use an ip raw socket.
Let's replay the ping tests by allowing 'ping' to use the ip icmp socket.
After the previous patch, ipv4 tests results are the same with both kinds
of socket. For ipv6, there are a lot a new failures (the previous patch
fixes only two cases).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireguard
Previous releases - regressions:
- igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
- mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()
- rds: acquire netns refcount on TCP sockets
- rxrpc: enable IPv6 checksums on transport socket
- nic: hinic: fix bug of wq out of bound access
- nic: thunder: don't use pci_irq_vector() in atomic context
- nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS flag
- nic: mlx5e:
- lag, fix use-after-free in fib event handler
- fix deadlock in sync reset flow
Previous releases - always broken:
- tcp: fix insufficient TCP source port randomness
- can: grcan: grcan_close(): fix deadlock
- nfc: reorder destructive operations in to avoid bugs
Misc:
- wireguard: improve selftests reliability
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=XuN7
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, rxrpc and wireguard.
Previous releases - regressions:
- igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
- mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()
- rds: acquire netns refcount on TCP sockets
- rxrpc: enable IPv6 checksums on transport socket
- nic: hinic: fix bug of wq out of bound access
- nic: thunder: don't use pci_irq_vector() in atomic context
- nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS
flag
- nic: mlx5e:
- lag, fix use-after-free in fib event handler
- fix deadlock in sync reset flow
Previous releases - always broken:
- tcp: fix insufficient TCP source port randomness
- can: grcan: grcan_close(): fix deadlock
- nfc: reorder destructive operations in to avoid bugs
Misc:
- wireguard: improve selftests reliability"
* tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
NFC: netlink: fix sleep in atomic bug when firmware download timeout
selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer
tcp: drop the hash_32() part from the index calculation
tcp: increase source port perturb table to 2^16
tcp: dynamically allocate the perturb table used by source ports
tcp: add small random increments to the source port
tcp: resalt the secret every 10 seconds
tcp: use different parts of the port_offset for index and offset
secure_seq: use the 64 bits of the siphash for port offset calculation
wireguard: selftests: set panic_on_warn=1 from cmdline
wireguard: selftests: bump package deps
wireguard: selftests: restore support for ccache
wireguard: selftests: use newer toolchains to fill out architectures
wireguard: selftests: limit parallelism to $(nproc) tests at once
wireguard: selftests: make routing loop test non-fatal
net/mlx5: Fix matching on inner TTC
net/mlx5: Avoid double clear or set of sync reset requested
net/mlx5: Fix deadlock in sync reset flow
net/mlx5e: Fix trust state reset in reload
net/mlx5e: Avoid checking offload capability in post_parse action
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJlxloeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGBoIH/3b1GGuTBq8XndVl
1EaCJe/3auE8cHklNpLyTWsQY7He9CcIe4b0fGmtkUlwqAE6E5fUPfqwzjjb3eux
MDPYYKbnjm/jA73dbTbr3lxMlc/caZpuRrwwuek0+vS0DLYhP917NmDvGX8q3l5U
84RCEHztrTmzOivS0BwNJV1XFpcqnODTDN4zNR43o9ZY9tVY4/OqL0+lcQIHM2Nh
6urEzWMMi+BRGaOqdgtt+NxmgKQNTRAkPan6FpJloRSxrOzl4LiYBKMfE2iyisND
91i1CGvOQjaQNIw9JYNvtSWGawMb+obTyCFHyj1Qm7LwD0VAZ+FQrvrdGz4rJrAY
Sq01XYs=
=Rl6l
-----END PGP SIGNATURE-----
Merge tag 'v5.18-rc4' into next
Merge master into next, to bring in commit 5f24d5a579 ("mm, hugetlb:
allow for "high" userspace addresses"), which is needed as a
prerequisite for the series converting powerpc to the generic mmap
logic.
As discussed here with Ido Schimmel:
https://patchwork.kernel.org/project/netdevbpf/patch/20220224102908.5255-2-jianbol@nvidia.com/
the default conform-exceed action is "reclassify", for a reason we don't
really understand.
The point is that hardware can't offload that police action, so not
specifying "conform-exceed" was always wrong, even though the command
used to work in hardware (but not in software) until the kernel started
adding validation for it.
Fix the command used by the selftest by making the policer drop on
exceed, and pass the packet to the next action (goto) on conform.
Fixes: 8cd6b020b6 ("selftests: ocelot: add some example VCAP IS1, IS2 and ES0 tc offloads")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220503121428.842906-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than setting this once init is running, set panic_on_warn from
the kernel command line, so that it catches splats from WireGuard
initialization code and the various crypto selftests.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use newer, more reliable package dependencies. These should hopefully
reduce flakes. However, we keep the old iputils package, as it
accumulated bugs after resulting in flakes on slow machines.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When moving to non-system toolchains, we inadvertantly killed the
ability to use ccache. So instead, build ccache support into the test
harness directly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than relying on the system to have cross toolchains available,
simply download musl.cc's ones and use that libc.so, and then we use it
to fill in a few missing platforms, such as riscv64, riscv64, powerpc64,
and s390x.
Since riscv doesn't have a second serial port in its device description,
we have to use virtio's vport. This is actually the same situation on
ARM, but we were previously hacking QEMU up to work around this, which
required a custom QEMU. Instead just do the vport trick on ARM too.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The parallel tests were added to catch queueing issues from multiple
cores. But what happens in reality when testing tons of processes is
that these separate threads wind up fighting with the scheduler, and we
wind up with contention in places we don't care about that decrease the
chances of hitting a bug. So just do a test with the number of CPU
cores, rather than trying to scale up arbitrarily.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is customary for selftests to have a comment with a topology diagram,
which serves to illustrate the situation in which the test is done. This
selftest lacks it. Add it.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is customary for selftests to have a comment with a topology diagram,
which serves to illustrate the situation in which the test is done. This
selftest lacks it. Add it.
While at it, fix the list of tests so that the test names are enumerated
one at a line.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A number of mlxsw-specific QoS tests use manual QoS DCB management. As
such, they need to make sure lldpad is not running, because it would
override the configuration the test has applied using other tools. To that
end, these selftests invoke the bail_on_lldpad() helper, which terminates
the selftest if th lldpad is running.
Some of these tests however first install the bash exit trap, which invokes
a cleanup() at the test exit. If bail_on_lldpad() has terminated the script
even before the setup part was run, the cleanup part will be very confused.
Therefore make sure bail_on_lldpad() is invoked before the cleanup is
registered.
While there are still edge cases where the user terminates the script
before the setup was fully done, this takes care of a common situation
where the cleanup would be invoked in an inconsistent state.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds a selftest script that performs a comprehensive
behavioral/functional test of all userspace PM capabilities by exercising
all the newly added APIs and changes to support said capabilities.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with a
"listen" option to bind a MPTCP listening socket to the
provided addr+port. This option is exercised in testing
subflow initiation scenarios in conjunction with userspace
path managers where the MPTCP application does not hold an
active listener to accept requests for new subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds to self-testing support for the MPTCP netlink interface
by capturing various MPTCP netlink events (and all their metadata)
associated with connections, subflows and address announcements.
It is used in self-testing scripts that exercise MPTCP netlink commands
to precisely validate those operations by examining the dispatched
MPTCP netlink events in response to those commands.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with a "dsf"
(destroy subflow) option to support the newly added netlink interface
command MPTCP_PM_CMD_SUBFLOW_DESTROY over the chosen MPTCP connection.
E.g. ./pm_nl_ctl dsf lip 10.0.2.1 lport 44567 rip 10.0.2.2 rport 56789
token 823274047
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with a "csf"
(create subflow) option to support the newly added netlink interface
command MPTCP_PM_CMD_SUBFLOW_CREATE over the chosen MPTCP connection.
E.g. ./pm_nl_ctl csf lip 10.0.2.1 lid 23 rip 10.0.2.2 rport 56789
token 823274047
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with a "rem"
(remove) option to support the newly added netlink interface command
MPTCP_PM_CMD_REMOVE to issue a REMOVE_ADDR signal over the
chosen MPTCP connection.
E.g. ./pm_nl_ctl rem token 823274047 id 23
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with an "ann"
(announce) option to support the newly added netlink interface command
MPTCP_PM_CMD_ANNOUNCE to issue ADD_ADDR advertisements over the
chosen MPTCP connection.
E.g. ./pm_nl_ctl ann 192.168.122.75 token 823274047 id 25 dev enp1s0
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the arm64 kselftests attempt to locate the ABI headers using
custom logic which doesn't work correctly in the case of out of tree builds
if KBUILD_OUTPUT is not specified. Since lib.mk defines KHDR_INCLUDES with
the appropriate flags we can simply remove the custom logic and use that
instead.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220503231655.211346-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Assert that the vCPU exits to userspace with KVM_SYSTEM_EVENT_SUSPEND if
the guest calls PSCI SYSTEM_SUSPEND. Additionally, guarantee that the
SMC32 and SMC64 flavors of this call are discoverable with the
PSCI_FEATURES call.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-13-oupton@google.com
Split up the current test into several helpers that will be useful to
subsequent test cases added to the PSCI test suite.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-12-oupton@google.com
Setting a vCPU's MP state to KVM_MP_STATE_STOPPED has the effect of
powering off the vCPU. Rather than using the vCPU init feature flag, use
the KVM_SET_MP_STATE ioctl to power off the target vCPU.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-11-oupton@google.com
The PSCI and PV stolen time tests both need to make SMCCC calls within
the guest. Create a helper for making SMCCC calls and rework the
existing tests to use the library function.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-10-oupton@google.com
There are other interactions with PSCI worth testing; rename the PSCI
test to make it more generic.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-9-oupton@google.com
Test basic (port-default, VLAN PCP and IP DSCP) QoS classification for
Ocelot switches. Advanced QoS classification using tc filters is covered
by tc_flower_chains.sh in the same directory.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220502155424.4098917-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check userspace PM behavior to ensure ADD_ADDR echoes are only sent when
there is an active userspace daemon. If the daemon is restarting or
hasn't loaded yet, the missing echo will cause the peer to retransmit
the ADD_ADDR - and hopefully the daemon will be ready to receive it at
that later time.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This verifies that if a filter is set up with the wait killable feature
that it obeys the semantics that non-fatal signals are ignored during
a notification after the notification is received.
Cases tested:
* Non-fatal signal prior to receive
* Non-fatal signal during receive
* Fatal signal after receive
The normal signal handling is tested in user_notification_signal. That
behaviour remains unchanged.
On an unsupported kernel, these tests will immediately bail as it relies
on a new seccomp flag.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503080958.20220-4-sargun@sargun.me
This splits up the get_proc_stat function to make it so we can use it as a
generic helper to read the nth field from multiple different files, versus
replicating the logic in multiple places.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503080958.20220-3-sargun@sargun.me
Add the psuedo-firmware registers KVM_REG_ARM_STD_BMAP,
KVM_REG_ARM_STD_HYP_BMAP, and KVM_REG_ARM_VENDOR_HYP_BMAP to
the base_regs[] list.
Also, add the COPROC support for KVM_REG_ARM_FW_FEAT_BMAP.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220502233853.1233742-10-rananta@google.com
Introduce a KVM selftest to check the hypercall interface
for arm64 platforms. The test validates the user-space'
[GET|SET]_ONE_REG interface to read/write the psuedo-firmware
registers as well as its effects on the guest upon certain
configurations.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220502233853.1233742-9-rananta@google.com
The PSCI and PV stolen time tests both need to make SMCCC calls within
the guest. Create a helper for making SMCCC calls and rework the
existing tests to use the library function.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220409184549.1681189-11-oupton@google.com
There are other interactions with PSCI worth testing; rename the PSCI
test to make it more generic.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220409184549.1681189-10-oupton@google.com
The program uses CLOCK_TAI as default clock since it was added to the
Linux repo. In commit:
| 040806343b ("selftests/net: so_txtime multi-host support")
a help text stating the wrong default clock was added.
This patch fixes the help text.
Fixes: 040806343b ("selftests/net: so_txtime multi-host support")
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220502094638.1921702-3-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch fixes the parsing of the cmd line supplied start time on 32
bit systems. A "long" on 32 bit systems is only 32 bit wide and cannot
hold a timestamp in nano second resolution.
Fixes: 040806343b ("selftests/net: so_txtime multi-host support")
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220502094638.1921702-2-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test that sends 1Gbps of traffic through the switch, into which it
then injects a burst of traffic and tests that there are no drops.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add two helpers, start_traffic_pktsize() and start_tcp_traffic_pktsize(),
that allow explicit overriding of packet size. Change start_traffic() and
start_tcp_traffic() to dispatch through these helpers with the default
packet size.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In emulated environments, the bridge ports enslaved to br1 get a carrier
before changing br1's PVID. This means that by the time the PVID is
changed, br1 is already operational and configured with an IPv6
link-local address.
When the test is run with netdevs registered by mlxsw, changing the PVID
is vetoed, as changing the VID associated with an existing L3 interface
is forbidden. This restriction is similar to the 8021q driver's
restriction of changing the VID of an existing interface.
Fix this by taking br1 down and bringing it back up when it is fully
configured.
With this fix, the test reliably passes on top of both the SW and HW
data paths (emulated or not).
Fixes: 239e754af8 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220502084507.364774-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Felix VSC9959 switch in NXP LS1028A supports the tc-gate action
which enforced time-based access control per stream. A stream as seen by
this switch is identified by {MAC DA, VID}.
We use the standard forwarding selftest topology with 2 host interfaces
and 2 switch interfaces. The host ports must require timestamping non-IP
packets and supporting tc-etf offload, for isochron to work. The
isochron program monitors network sync status (ptp4l, phc2sys) and
deterministically transmits packets to the switch such that the tc-gate
action either (a) always accepts them based on its schedule, or
(b) always drops them.
I tried to keep as much of the logic that isn't specific to the NXP
LS1028A in a new tsn_lib.sh, for future reuse. This covers
synchronization using ptp4l and phc2sys, and isochron.
The cycle-time chosen for this selftest isn't particularly impressive
(and the focus is the functionality of the switch), but I didn't really
know what to do better, considering that it will mostly be run during
debugging sessions, various kernel bloatware would be enabled, like
lockdep, KASAN, etc, and we certainly can't run any races with those on.
I tried to look through the kselftest framework for other real time
applications and didn't really find any, so I'm not sure how better to
prepare the environment in case we want to go for a lower cycle time.
At the moment, the only thing the selftest is ensuring is that dynamic
frequency scaling is disabled on the CPU that isochron runs on. It would
probably be useful to have a blacklist of kernel config options (checked
through zcat /proc/config.gz) and some cyclictest scripts to run
beforehand, but I saw none of those.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20220501112953.3298973-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Merge 5.18-rc5 into char-misc-next
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a boilerplate test loop to run all tests in
vrf_strict_mode_test.sh. Add a -t flag that allows a selected test to
run. Remove the vrf_strict_mode_tests function which is now unused.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220429164658.GA656707@jaehee-ThinkPad-X1-Extreme
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When generating the selftests to another folder, the fixed tests are
missing as they are not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net/forwarding" INSTALL_PATH=/tmp/kselftests
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When generating the selftests to another folder, the fixed tests are
missing as they are not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net" INSTALL_PATH=/tmp/kselftests
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tests ensure that the in-kernel path manager is bypassed when
the userspace path manager is configured. Kernel code is still
responsible for ADD_ADDR echo, so also make sure that's working.
Tested-by: Geliang Tang <geliang.tang@suse.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new test for memory.reclaim that verifies that the interface
correctly reclaims memory as intended, from both anon and file pages.
Link: https://lkml.kernel.org/r/20220425190040.2475377-5-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Chen Wandun <chenwandun@huawei.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, alloc_anon_noexit() calls alloc_anon() which instantly frees
the allocated memory. alloc_anon_noexit() is usually used with
cg_run_nowait() to run a process in the background that allocates
memory. It makes sense for the background process to keep the memory
allocated and not instantly free it (otherwise there is no point of
running it in the background).
Link: https://lkml.kernel.org/r/20220425190040.2475377-4-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Chen Wandun <chenwandun@huawei.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When multiple notifications are waiting, ensure they show up in order, as
defined by the (predictable) seccomp notification ID. This ensures FIFO
ordering of notification delivery as notification ids are monitonic and
decided when the notification is generated (as opposed to received).
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: linux-kselftest@vger.kernel.org
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220428015447.13661-2-sargun@sargun.me
Running the seccomp tests under the kernel with "defconfig"
shouldn't fail. Because the CONFIG_USER_NS is not supported
in "defconfig". Skipping this case instead of failing it is
better.
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/7f7687696a5c0a2d040a24474616e945c7cf2bb5.1648599460.git.yang.guang5@zte.com.cn
Add a test to check that PTRACE_O_SUSPEND_SECCOMP can't be set without
CAP_SYS_ADMIN through PTRACE_SEIZE or PTRACE_SETOPTIONS.
Signed-off-by: Jann Horn <jannh@google.com>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Since commit 92d25637a3 ("kselftest: signal all child processes"), tests
are executed in background process groups. This means that trying to read
from stdin now throws SIGTTIN when stdin is a TTY, which breaks some
seccomp selftests that try to use read(0, NULL, 0) as a dummy syscall.
The simplest way to fix that is probably to just use -1 instead of 0 as
the dummy read()'s FD.
Fixes: 92d25637a3 ("kselftest: signal all child processes")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220319010011.1374622-1-jannh@google.com
asm/mce.h is not available on arm, and it is not needed to build nfit.c.
Remove the include.
It was likely needed for COPY_MC_TEST
Fixes: 3adb776384 ("x86, libnvdimm/test: Remove COPY_MC_TEST")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/20220429074334.21771-1-msuchanek@suse.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The ioremap passed as argument to __nfit_test_ioremap can be a macro so
it cannot be passed as function argument. Make __nfit_test_ioremap into
a macro so that ioremap can be passed as untyped macro argument.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Fixes: 6bc756193f ("tools/testing/nvdimm: libnvdimm unit test infrastructure")
Link: https://lore.kernel.org/r/20220429134039.18252-1-msuchanek@suse.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add selftests to verify the firmware upload mechanism. These test
include simple firmware uploads as well as upload cancellation and
error injection. The test creates three firmware devices and verifies
that they all work correctly and independently.
Tested-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220426163532.114961-1-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These might not be issues yet, but they make the script more fragile.
Also by fixing them we give a better example to future readers, who might
copy/paste or otherwise re-use snippets from our script.
- Use "read -r", since we don't ever want read to be interpreting '\'
characters as escape sequences...
- Quote variables, to deal with spaces properly.
- Use $() instead of the older and harder-to-nest ``.
- Get rid of superfluous "$" prefixes inside arithmetic $(()).
Link: https://lkml.kernel.org/r/20220421224928.1848230-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously, each test printed out its own header, dealt with its own
return code, etc. By just putting this standard stuff in a function, we
can delete > 300 lines from the script.
This also makes adding future tests easier. And, it gets rid of various
inconsistencies that already exist:
- Some tests correctly deal with ksft_skip, but others don't.
- Some tests just print the executable name, others print arguments, and
yet others print some comment in the header.
- Most tests print out a header with two separator lines, but not the
HMM smoke test or the memfd_secret test, which only print one.
- We had a redundant "exit" at the end, with all the boilerplate it's an
easy oversight.
Link: https://lkml.kernel.org/r/20220421224928.1848230-1-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This introduces three tests:
1) Sanity check soft dirty basic semantics: allocate area, clean,
dirty, check if the SD bit is flipped.
2) Check VMA reuse: validate the VM_SOFTDIRTY usage
3) Check soft-dirty on huge pages
This was motivated by Will Deacon's fix commit 912efa17e5 ("mm: proc:
Invalidate TLB after clearing soft-dirty page state"). I was tracking the
same issue that he fixed, and this test would have caught it.
Link: https://lkml.kernel.org/r/20220420084036.4101604-2-usama.anjum@collabora.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Will Deacon <will@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Bring common functions to a new file while keeping code as much same as
possible. These functions can be used in the new tests. This helps in
avoiding code duplication.
Link: https://lkml.kernel.org/r/20220420084036.4101604-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Gabriel Krisman Bertazi <krisman@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Print three possible reasons /sys/kernel/debug/gup_test cannot be opened
to help users of this test diagnose failures.
Link: https://lkml.kernel.org/r/20220405214809.3351223-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add some basic migration tests and in particular tests that will
stress both the pte and pmd migration entry wait paths.
Link: https://lkml.kernel.org/r/20220324014349.229253-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 0e4b01df86 ("mm, memcg: throttle allocators when failing
reclaim over memory.high") allocating memory over memory.high became very
time consuming. But it's exactly what the memory.high test from cgroup
kselftests is doing: it tries to allocate 100M with 30M memory.high value.
It takes forever to complete.
In order to keep it passing (or failing) in a reasonable amount of time
let's try to allocate only a little over 30M: 31M to be precise.
With this change test_memcontrol finishes in a reasonable amount of
time:
$ time ./test_memcontrol
ok 1 test_memcg_subtree_control
ok 2 test_memcg_current
ok 3 test_memcg_min
ok 4 test_memcg_low
ok 5 test_memcg_high
ok 6 test_memcg_max
ok 7 test_memcg_oom_events
ok 8 test_memcg_swap_max
ok 9 test_memcg_sock
ok 10 test_memcg_oom_group_leaf_events
ok 11 test_memcg_oom_group_parent_events
ok 12 test_memcg_oom_group_score_events
real 0m2.273s
user 0m0.064s
sys 0m0.739s
Link: https://lkml.kernel.org/r/20220415000133.3955987-3-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: David Vernet <void@manifault.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: memcg kselftests fixes".
This patch (of 4):
Commit 9852ae3fe5 ("mm, memcg: consider subtrees in memory.events") made
memory.events recursive: all events are propagated upwards by the tree.
It was a change in semantics.
It broke the oom group leaf events test: it assumes that after an OOM the
oom_kill counter is zero on parent's level.
Let's adjust the test: it should have similar expectations for the child
and parent levels.
The test passes after this fix.
Link: https://lkml.kernel.org/r/20220415000133.3955987-2-roman.gushchin@linux.dev
Link: https://lkml.kernel.org/r/20220415000133.3955987-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: David Vernet <void@manifault.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a subtest that excercises bpf_map__set_autocreate() API and
validates that libbpf properly fixes up BPF verifier log with correct
map information.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220428041523.4089853-5-andrii@kernel.org
Add new or modify existing SEC() definitions to be target-less and
validate that libbpf handles such program definitions correctly.
For kprobe/kretprobe we also add explicit test that generic
bpf_program__attach() works in cases when kprobe definition contains
proper target. It wasn't previously tested as selftests code always
explicitly specified the target regardless.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220428185349.3799599-4-andrii@kernel.org
and netfilter.
Current release - new code bugs:
- bridge: switchdev: check br_vlan_group() return value
- use this_cpu_inc() to increment net->core_stats, fix preempt-rt
Previous releases - regressions:
- eth: stmmac: fix write to sgmii_adapter_base
Previous releases - always broken:
- netfilter: nf_conntrack_tcp: re-init for syn packets only,
resolving issues with TCP fastopen
- tcp: md5: fix incorrect tcp_header_len for incoming connections
- tcp: fix F-RTO may not work correctly when receiving DSACK
- tcp: ensure use of most recently sent skb when filling rate samples
- tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
- virtio_net: fix wrong buf address calculation when using xdp
- xsk: fix forwarding when combining copy mode with busy poll
- xsk: fix possible crash when multiple sockets are created
- bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from
bpf_xmit lwt hook
- sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event
- wireguard: device: check for metadata_dst with skb_valid_dst()
- netfilter: update ip6_route_me_harder to consider L3 domain
- gre: make o_seqno start from 0 in native mode
- gre: switch o_seqno to atomic to prevent races in collect_md mode
Misc:
- add Eric Dumazet to networking maintainers
- dt: dsa: realtek: remove realtek,rtl8367s string
- netfilter: flowtable: Remove the empty file
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XOSt
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and netfilter.
Current release - new code bugs:
- bridge: switchdev: check br_vlan_group() return value
- use this_cpu_inc() to increment net->core_stats, fix preempt-rt
Previous releases - regressions:
- eth: stmmac: fix write to sgmii_adapter_base
Previous releases - always broken:
- netfilter: nf_conntrack_tcp: re-init for syn packets only,
resolving issues with TCP fastopen
- tcp: md5: fix incorrect tcp_header_len for incoming connections
- tcp: fix F-RTO may not work correctly when receiving DSACK
- tcp: ensure use of most recently sent skb when filling rate samples
- tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
- virtio_net: fix wrong buf address calculation when using xdp
- xsk: fix forwarding when combining copy mode with busy poll
- xsk: fix possible crash when multiple sockets are created
- bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from
bpf_xmit lwt hook
- sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event
- wireguard: device: check for metadata_dst with skb_valid_dst()
- netfilter: update ip6_route_me_harder to consider L3 domain
- gre: make o_seqno start from 0 in native mode
- gre: switch o_seqno to atomic to prevent races in collect_md mode
Misc:
- add Eric Dumazet to networking maintainers
- dt: dsa: realtek: remove realtek,rtl8367s string
- netfilter: flowtable: Remove the empty file"
* tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
tcp: fix F-RTO may not work correctly when receiving DSACK
Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"
net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK
ixgbe: ensure IPsec VF<->PF compatibility
MAINTAINERS: Update BNXT entry with firmware files
netfilter: nft_socket: only do sk lookups when indev is available
net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
bnx2x: fix napi API usage sequence
tls: Skip tls_append_frag on zero copy size
Add Eric Dumazet to networking maintainers
netfilter: conntrack: fix udp offload timeout sysctl
netfilter: nf_conntrack_tcp: re-init for syn packets only
net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
net: Use this_cpu_inc() to increment net->core_stats
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
ice: fix use-after-free when deinitializing mailbox snapshot
ice: wait 5 s for EMP reset after firmware flash
ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()
...
Currently the arm64 floating point tests don't support out of tree builds
due to two quirks of the kselftest build system. One is that when building
a program from multiple files we shouldn't separately compile the main
program to an object file as that will result in the pattern rule not
matching when adjusted for the output directory. The other is that we also
need to include $(OUTPUT) in the names of the binaries when specifying the
dependencies in order to ensure that they get picked up with O=.
Rewrite the dependencies for the executables to fix these issues. The
kselftest build system will ensure OUTPUT is always defined.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We provide a couple of object files with helpers linked into several of
the test programs, ensure they are cleaned.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some of the rules in lib.mk use a top_srcdir variable to figure out where
the top of the kselftest tree is, provide it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The kselftest lib.mk provides a default all target which builds additional
programs from TEST_GEN_PROGS_EXTENDED, use that rather than using
TEST_PROGS_EXTENDED which is for programs that don't need to be built like
shell scripts. Leave fpsimd-stress and sve-stress there since they are
scripts.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fix the following coccicheck warnings:
tools/testing/selftests/arm64/mte/check_child_memory.c:110:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:88:24-25:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:90:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:147:24-25:
WARNING: Use ARRAY_SIZE
`ARRAY_SIZE` macro is defined in tools/testing/selftests/kselftest.h.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419032501.22790-1-guozhengkui@vivo.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a small testcase that attempts to do a clone() with ZA enabled and
verifies that it remains enabled with the same contents. We only check
one word in one horizontal vector of ZA since there's already other tests
that check for data corruption more broadly, we're just looking to make
sure that ZA is still enabled and it looks like the data got copied.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220419112247.711548-40-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For every possible combination of SVE and SME vector length verify that for
each possible value of SVCR after a syscall we leave streaming mode and ZA
is preserved. We don't need to take account of any streaming/non streaming
SVE vector length changes in the assembler code since the store instructions
will handle the vector length for us. We log if the system supports FA64 and
only try to set FFR in streaming mode if it does.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-39-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add some basic coverage for the ZA ptrace interface, including walking
through all the vector lengths supported in the system. Unlike SVE
doing syscalls does not discard the ZA state so when we set data in ZA
we run the child process briefly, having it add one to each byte in ZA
in order to validate that both the vector size and data are being read
and written as expected when the process runs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-38-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In order to allow ptrace of streaming mode SVE registers we have added a
new regset for streaming mode which in isolation offers the same ABI as
regular SVE with a different vector type. Add this to the array of regsets
we handle, together with additional tests for the interoperation of the
two regsets.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-37-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add test cases for the SME signal handing ABI patterned off the SVE tests.
Due to the small size of the tests and the differences in ABI (especially
around needing to account for both streaming SVE and ZA) there is some code
duplication here.
We currently cover:
- Reporting of the vector length.
- Lack of support for changing vector length.
- Presence and size of register state for streaming SVE and ZA.
As with the SVE tests we do not yet have any validation of register
contents.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-36-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a stress test for context switching of the ZA register state based on
the similar tests Dave Martin wrote for FPSIMD and SVE registers. The test
loops indefinitely writing a data pattern to ZA then reading it back and
verifying that it's what was expected.
Unlike the other tests we manually assemble the SME instructions since at
present no released toolchain has SME support integrated.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-35-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As part of the generic code for signal handling test cases we parse all
signal frames to make sure they have at least the basic form we expect
and that there are no unexpected frames present in the signal context.
Add coverage of the ZA signal frame to this code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-34-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
One of the features of SME is the addition of streaming mode, in which we
have access to a set of streaming mode SVE registers at the SME vector
length. Since these are accessed using the SVE instructions let's reuse
the existing SVE stress test for testing with a compile time option for
controlling the few small differences needed:
- Enter streaming mode immediately on starting the program.
- In streaming mode FFR is removed so skip reading and writing FFR.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-33-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Provide RDVL helpers for SME and extend the main vector configuration tests
to cover SME.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-32-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Scalable Matrix Extension adds a new system register TPIDR2 intended to
be used by libc for its own thread specific use, add some kselftests which
exercise the ABI for it.
Since this test should with some adjustment work for TPIDR and any other
similar registers added in future add tests for it in a separate
directory rather than placing it with the other floating point tests,
nothing existing looked suitable so I created a new test directory
called "abi".
Since this feature is intended to be used by libc the test is built as
freestanding code using nolibc so we don't end up with the test program
and libc both trying to manage the register simultaneously and
distrupting each other. As a result of being written using nolibc rather
than using hwcaps to identify if SME is available in the system we check
for the default SME vector length configuration in proc, adding hwcap
support to nolibc seems like disproportionate effort and didn't feel
entirely idiomatic for what nolibc is trying to do.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-31-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Scalable Matrix Extenions (SME) introduces additional register state
with configurable vector lengths, similar to SVE but configured separately.
Extend vlset to support configuring this state with a --sme or -s command
line option.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-30-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As for the kernel so that we don't have ambitious toolchain requirements
to build the tests manually encode some of the SVE instructions.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-29-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The current tests use the prctls for various things but there's no
coverage of the edges of the interface so add some basics. This isn't
hugely useful as it is (it originally had some coverage for the
combinations with asymmetric mode but we removed the prctl() for that)
but it might be a helpful starting point for future work, for example
covering error handling.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419103243.24774-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we just have a big if statement with a non-specific diagnostic
checking both the mode and the tag. Since we'll need to dynamically check
for asymmetric mode support in the system and to improve debugability split
these checks out.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419103243.24774-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Help people figure out problems by printing a diagnostic when we get an
unexpected asynchronous fault.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419103243.24774-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The MTE selftests have a helper evaluate_test() which translates a return
code into a call to ksft_test_result_*(). Currently this only handles pass
and fail, silently ignoring any other code. Update the helper to support
skipped tests and log any unknown return codes as an error so we get at
least some diagnostic if anything goes wrong.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419103243.24774-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we validate that we can set the floating point state via the SVE
regset and read the data via the FPSIMD regset but we do not valiate that
the opposite case works as expected. Add a test that covers this case,
noting that when reading via SVE regset the kernel has the option of
returning either SVE or FPSIMD data so we need to accept both formats.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220404090613.181272-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently the sve-ptrace test for setting and reading FPSIMD data assumes
that the child will start off in FPSIMD only mode and that it can use this
to read some FPSIMD mode SVE ptrace data, skipping the test if it can't.
This isn't an assumption guaranteed by the ABI and also limits how we can
use this testcase within the program. Instead skip the initial read and
just generate a FPSIMD format buffer for the write part of the test, making
the coverage more robust in the face of future kernel and test program
changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220404090613.181272-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The comment for ptrace_sve_get_fpsimd_data() doesn't describe what the test
does at all, fix that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220404090613.181272-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Implement per subtest log collection for both parallel
and sequential test execution. This allows granular
per-subtest error output in the 'All error logs' section.
Add subtest log transfer into the protocol during the
parallel test execution.
Move all test log printing logic into dump_test_log
function. One exception is the output of test names when
verbose printing is enabled. Move test name/result
printing into separate functions to avoid repetition.
Print all successful subtest results in the log. Print
only failed test logs when test does not have subtests.
Or only failed subtests' logs when test has subtests.
Disable 'All error logs' output when verbose mode is
enabled. This functionality was already broken and is
causing confusion.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220427041353.246007-1-mykolal@fb.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-27
We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).
The main changes are:
1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
information about failed CO-RE relocations, from Andrii Nakryiko.
2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
(via probe read) and referenced ones that can be passed to in-kernel helpers,
from Kumar Kartikeya Dwivedi.
3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.
4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
the effective prog array before the rcu_read_lock, from Stanislav Fomichev.
5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
for USDT arguments under riscv{32,64}, from Pu Lehui.
6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.
7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
so it can be shipped under Alpine which is musl-based, from Dominique Martinet.
8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
need to use call_rcu_tasks_trace() barrier, from KP Singh.
9) Improve libbpf API documentation and fix error return handling of various
API functions, from Grant Seltzer.
10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
length of frags + frag_list may surpass old offset limit, from Liu Jian.
11) Various improvements to prog_tests in area of logging, test execution
and by-name subtest selection, from Mykola Lysenko.
12) Simplify map_btf_id generation for all map types by moving this process
to build time with help of resolve_btfids infra, from Menglong Dong.
13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
helpers; the probing caused always to use old helpers, from Runqing Yang.
14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
tracing macros, from Vladimir Isaev.
15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
switched to memcg-based memory accouting a while ago, from Yafang Shao.
16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.
17) Fix BPF selftests in two occasions to work around regressions caused by latest
LLVM to unblock CI until their fixes are worked out, from Yonghong Song.
18) Misc cleanups all over the place, from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add libbpf's log fixup logic selftests
libbpf: Fix up verifier log for unguarded failed CO-RE relos
libbpf: Simplify bpf_core_parse_spec() signature
libbpf: Refactor CO-RE relo human description formatting routine
libbpf: Record subprog-resolved CO-RE relocations unconditionally
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
libbpf: Fix logic for finding matching program for CO-RE relocation
libbpf: Drop unhelpful "program too large" guess
libbpf: Fix anonymous type check in CO-RE logic
bpf: Compute map_btf_id during build time
selftests/bpf: Add test for strict BTF type check
selftests/bpf: Add verifier tests for kptr
selftests/bpf: Add C tests for kptr
libbpf: Add kptr type tag macros to bpf_helpers.h
bpf: Make BTF type match stricter for release arguments
bpf: Teach verifier about kptr_get kfunc helpers
bpf: Wire up freeing of referenced kptr
bpf: Populate pairs of btf_id and destructor kfunc in btf
bpf: Adapt copy_map_value for multiple offset case
...
====================
Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the multiple checksum errors occur in chk_csum_nr(), print the
numbers of the errors as an extra message.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends chk_fail_nr to check the MP_FAIL response mibs.
Add a new argument invert for chk_fail_nr to allow it can check the
MP_FAIL TX and RX mibs from the opposite direction.
When the infinite map is received before the MP_FAIL response, the
response will be lost. A '-' can be added into fail_tx or fail_rx to
represent that MP_FAIL response TX or RX can be lost when doing the
checks.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the single subflow test case for MP_FAIL, to test the infinite
mapping case. Use the test_linkfail value to make 128KB test files.
Add a new function reset_with_fail(), in it use 'iptables' and 'tc
action pedit' rules to produce the bit flips to trigger the checksum
failures. Set validate_checksum to enable checksums for the MP_FAIL
tests without passing the '-C' argument. Set check_invert flag to
enable the invert bytes check for the output data in check_transfer().
Instead of the file mismatch error, this test prints out the inverted
bytes.
Add a new function pedit_action_pkts() to get the numbers of the packets
edited by the tc pedit actions. Print this numbers to the output.
Also add the needed kernel configures in the selftests config file.
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds a simple test of some basic matrix multiply assist (MMA)
instructions.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200622021832.15870-1-alistair@popple.id.au
Add tests validating that libbpf is indeed patching up BPF verifier log
with CO-RE relocation details. Also test partial and full truncation
scenarios.
This test might be a bit fragile due to changing BPF verifier log
format. If that proves to be frequently breaking, we can simplify tests
or remove the truncation subtests. But for now it seems useful to test
it in those conditions that are otherwise rarely occuring in practice.
Also test CO-RE relo failure in a subprog as that excercises subprogram CO-RE
relocation mapping logic which doesn't work out of the box without extra
relo storage previously done only for gen_loader case.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-11-andrii@kernel.org
Enhance linked_funcs selftest with two tricky features that might not
obviously work correctly together. We add CO-RE relocations to entry BPF
programs and mark those programs as non-autoloadable with SEC("?...")
annotation. This makes sure that libbpf itself handles .BTF.ext CO-RE
relocation data matching correctly for SEC("?...") programs, as well as
ensures that BPF static linker handles this correctly (this was the case
before, no changes are necessary, but it wasn't explicitly tested).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-6-andrii@kernel.org
Currently if opening /dev/null fails to open then file pointer fp
is null and further access to fp via fprintf will cause a null
pointer dereference. Fix this by returning a negative error value
when a null fp is detected.
Detected using cppcheck static analysis:
tools/testing/selftests/resctrl/fill_buf.c:124:6: note: Assuming
that condition '!fp' is not redundant
if (!fp)
^
tools/testing/selftests/resctrl/fill_buf.c:126:10: note: Null
pointer dereference
fprintf(fp, "Sum: %d ", ret);
Fixes: a2561b12fe ("selftests/resctrl: Add built in benchmark")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
All work currently pending will be done first by calling destroy_workqueue,
so there is no need to flush it explicitly.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220424062655.3221152-1-ran.jianping@zte.com.cn
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Ensure that the edge case where first member type was matched
successfully even if it didn't match BTF type of register is caught and
rejected by the verifier.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-14-memxor@gmail.com
Reuse bpf_prog_test functions to test the support for PTR_TO_BTF_ID in
BPF map case, including some tests that verify implementation sanity and
corner cases.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-13-memxor@gmail.com
This uses the __kptr and __kptr_ref macros as well, and tries to test
the stuff that is supposed to work, since we have negative tests in
test_verifier suite. Also include some code to test map-in-map support,
such that the inner_map_meta matches the kptr_off_tab of map added as
element.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-12-memxor@gmail.com
The function __perf_reg_mask has an unsigned return type, but returns a
negative constant to indicate an error condition. So we change unsigned
to int.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1650788802-14402-1-git-send-email-baihaowen@meizu.com
Add a new type flag for bpf_arg_type that when set tells verifier that
for a release function, that argument's register will be the one for
which meta.ref_obj_id will be set, and which will then be released
using release_reference. To capture the regno, introduce a new field
release_regno in bpf_call_arg_meta.
This would be required in the next patch, where we may either pass NULL
or a refcounted pointer as an argument to the release function
bpf_kptr_xchg. Just releasing only when meta.ref_obj_id is set is not
enough, as there is a case where the type of argument needed matches,
but the ref_obj_id is set to 0. Hence, we must enforce that whenever
meta.ref_obj_id is zero, the register that is to be released can only
be NULL for a release function.
Since we now indicate whether an argument is to be released in
bpf_func_proto itself, is_release_function helper has lost its utitlity,
hence refactor code to work without it, and just rely on
meta.release_regno to know when to release state for a ref_obj_id.
Still, the restriction of one release argument and only one ref_obj_id
passed to BPF helper or kfunc remains. This may be lifted in the future.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-3-memxor@gmail.com
resctrl_tests can be built or run using kselftests framework.
Add description on how to do so in README.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In kselftest framework, all tests can be build/run at a time,
and a sub test also can be build/run individually. As follows:
$ make kselftest-all TARGETS=resctrl
$ make -C tools/testing/selftests run_tests
$ make -C tools/testing/selftests TARGETS=resctrl run_tests
However, resctrl_tests cannot be run using kselftest framework,
users have to change directory to tools/testing/selftests/resctrl/,
run "make" to build executable file "resctrl_tests",
and run "sudo ./resctrl_tests" to execute the test.
To build/run resctrl_tests using kselftest framework.
Modify tools/testing/selftests/Makefile
and tools/testing/selftests/resctrl/Makefile.
Even after this change, users can still build/run resctrl_tests
without using framework as before.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> # resctrl changes
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In kselftest framework, if a sub test can not run by some reasons,
the test result should be marked as SKIP rather than FAIL.
Return KSFT_SKIP(4) instead of KSFT_FAIL(1) if resctrl_tests is not run
as root or it is run on a test environment which does not support resctrl.
- ksft_exit_fail_msg(): returns KSFT_FAIL(1)
- ksft_exit_skip(): returns KSFT_SKIP(4)
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When testing on a Intel(R) Xeon(R) Gold 6254 CPU @ 3.10GHz the resctrl
selftests fail due to timeout after exceeding the default time limit of
45 seconds. On this system the test takes about 68 seconds.
Since the failing test by default accesses a fixed size of memory, the
execution time should not vary significantly between different environment.
A new default of 120 seconds should be sufficient yet easy to customize
with the introduction of the "settings" file for reference.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In kselftest framework, a sub test is run using the timeout utility
and it will send SIGTERM to the test upon timeout.
In resctrl_tests, a child process is created by fork() to
run benchmark but SIGTERM is not set in sigaction().
If SIGTERM signal is received, the parent process will be killed,
but the child process still exists.
Kill child process before the parent process terminates
if SIGTERM signal is received.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
According to "Intel Resource Director Technology (Intel RDT) on
2nd Generation Intel Xeon Scalable Processors Reference Manual",
When the Intel Sub-NUMA Clustering(SNC) feature is enabled,
Intel CMT and MBM counters may not be accurate.
However, there does not seem to be an architectural way to detect
if SNC is enabled.
If the result of MBM&CMT test fails on Intel CPU,
print a message to let users know a possible cause of failure.
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, the resctrl_tests only has a function to detect AMD vendor.
Since when the Intel Sub-NUMA Clustering feature is enabled,
Intel CMT and MBM counters may not be accurate,
the resctrl_tests also need a function to detect Intel vendor.
And in the future, resctrl_tests will need a function to detect different
vendors, such as Arm.
Extend the function to detect Intel vendor as well. Also,
this function can be easily extended to detect other vendors.
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be supported with gcc v3.2,
the minimal required version for stable kernels.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be supported with gcc v3.2,
the minimal required version for stable kernels.
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from already included kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be compiled with gcc v3.2,
the minimal required version for stable kernels.
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: linux-mm@kvack.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Some selftests depend on information provided by the CPUID instruction.
To support this dependency the selftests implement private wrappers for
CPUID.
Duplication of the CPUID wrappers should be avoided.
Both gcc and clang/LLVM provide __cpuid_count() macros but neither
the macro nor its header file are available in all the compiler
versions that need to be supported by the selftests. __cpuid_count()
as provided by gcc is available starting with gcc v4.4, so it is
not available if the latest tests need to be run in all the
environments required to support kernels v4.9 and v4.14 that
have the minimal required gcc v3.2.
Duplicate gcc's __cpuid_count() macro to provide a centrally defined
macro for __cpuid_count() to help eliminate the duplicate CPUID wrappers
while continuing to compile in older environments.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the damon selftests are not built with the rest of the
selftests. We add damon to the list of targets.
Fixes: b348eb7abd ("mm/damon: add user space selftests")
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Yuanchu Xie <yuanchu@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Most of the test suites in tools/testing/selftests contain a config file
that specifies which kernel config options need to be present in order for
the test suite to be able to run and perform meaningful validation. There
is no config file for the tools/testing/selftests/cgroup test suite, so
this patch adds one.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup cpu controller selftests have a test_cpucg_max() testcase
that validates the behavior of the cpu.max knob. Let's also add a
testcase that verifies that the behavior works correctly when set on a
nested cgroup.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup cpu controller test suite has a number of testcases that
validate the expected behavior of the cpu.weight knob, but none for
cpu.max. This testcase fixes that by adding a testcase for cpu.max as well.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup cpu controller test suite currently contains a testcase called
test_cpucg_nested_weight_underprovisioned() which verifies the expected
behavior of cpu.weight when applied to nested cgroups. That first testcase
validated the expected behavior when the processes in the leaf cgroups
overcommitted the system. This patch adds a complementary
test_cpucg_nested_weight_underprovisioned() testcase which validates
behavior when those leaf cgroups undercommit the system.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup cpu controller tests in
tools/testing/selftests/cgroup/test_cpu.c have some testcases that validate
the expected behavior of setting cpu.weight on cgroups, and then hogging
CPUs. What is still missing from the suite is a testcase that validates
nested cgroups. This patch adds test_cpucg_nested_weight_overprovisioned(),
which validates that a parent's cpu.weight will override its children if
they overcommit a host, and properly protect any sibling groups of that
parent.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently the binderfs test says what failure it encountered
without saying why it may occurred when it fails to mount
binderfs. So, Warn about enabling CONFIG_ANDROID_BINDERFS in the
running kernel.
Signed-off-by: Karthik Alapati <mail@karthek.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Once line card is activated, check the device FW version is exposed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once line card is provisioned, check if HW revision and INI version
are exposed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once line card is provisioned, check the count of devices on it and
print them out.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not much of a test but we keep on getting problems with boolean controls
not being called Switches so let's add a few basic checks to help people
spot problems.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220421115020.14118-1-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds an initial subset of forwarding selftests which I considered
to be relevant for DSA drivers, along with a forwarding.config that
makes it easier to run them (disables veth pair creation, makes sure MAC
addresses are unique and stable).
The intention is to request driver writers to run these selftests during
review and make sure that the tests pass, or at least that the problems
are known.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This tests the capability of switch ports to filter out undesired
traffic. Different drivers are expected to have different capabilities
here (so some may fail and some may pass), yet the test still has some
value, for example to check for regressions.
There are 2 kinds of failures, one is when a packet which should have
been accepted isn't (and that should be fixed), and the other "failure"
(as reported by the test) is when a packet could have been filtered out
(for being unnecessary) yet it was received.
The bridge driver fares particularly badly at this test:
TEST: br0: Unicast IPv4 to primary MAC address [ OK ]
TEST: br0: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address [FAIL]
reception succeeded, but should have failed
TEST: br0: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to joined group [ OK ]
TEST: br0: Multicast IPv4 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: br0: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: br0: Multicast IPv6 to joined group [ OK ]
TEST: br0: Multicast IPv6 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: br0: Multicast IPv6 to unknown group, allmulti [ OK ]
mainly because it does not implement IFF_UNICAST_FLT. Yet I still think
having the test (with the failures) is useful in case somebody wants to
tackle that problem in the future, to make an easy before-and-after
comparison.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bombard a standalone switch port with various kinds of traffic to ensure
it is really standalone and doesn't leak packets to other switch ports.
Also check for switch ports in different bridges, and switch ports in a
VLAN-aware bridge but having different pvids. No forwarding should take
place in either case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pinging an IPv6 link-local multicast address selects the link-local
unicast address of the interface as source, and we'd like to monitor for
that in tcpdump.
Add a helper to the forwarding library which retrieves the link-local
IPv6 address of an interface, to make that task easier.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the forwarding library with calls to some small C programs which
join an IP multicast group and send some packets to it. Both IPv4 and
IPv6 groups are supported. Use cases range from testing IGMP/MLD
snooping, to RX filtering, to multicast routing.
Testing multicast traffic using msend/mreceive is intended to be done
using tcpdump.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend tcpdump_start() & C:o to handle multiple instances. Useful when
observing bridge operation, e.g., unicast learning/flooding, and any
case of multicast distribution (to these ports but not that one ...).
This means the interface argument is now a mandatory argument to all
tcpdump_*() functions, hence the changes to the ocelot flower test.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For some use-cases we may want to change the tcpdump flags used in
tcpdump_start(). For instance, observing interfaces without the PROMISC
flag, e.g. to see what's really being forwarded to the bridge interface.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By default, DSA switch ports inherit their MAC address from the DSA
master.
This works well for practical situations, but some selftests like
bridge_vlan_unaware.sh loop back 2 standalone DSA ports with 2 bridged
DSA ports, and require the bridge to forward packets between the
standalone ports.
Due to the bridge seeing that the MAC DA it needs to forward is present
as a local FDB entry (it coincides with the MAC address of the bridge
ports), the test packets are not forwarded, but terminated locally on
br0. In turn, this makes the ping and ping6 tests fail.
Address this by introducing an option to have stable MAC addresses.
When mac_addr_prepare is called, the current addresses of the netifs are
saved and replaced with 00:01:02:03:04:${netif number}. Then when
mac_addr_restore is called at the end of the test, the original MAC
addresses are restored. This ensures that the MAC addresses are unique,
which makes the test pass even for DSA ports.
The usage model is for the behavior to be opt-in via STABLE_MAC_ADDRS,
which DSA should set to true, all others behave as before. By hooking
the calls to mac_addr_prepare and mac_addr_restore within the forwarding
lib itself, we do not need to patch each individual selftest, the only
requirement is that pre_cleanup is called.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a function chk_infi_nr() to check the mibs for the
infinite mapping. Invoke it in chk_join_nr() when validate_checksum
is set.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Remove 's' & 'u' as valid ISA extension
* Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
x86:
* Fix NMI watchdog in guests on AMD
* Fix for SEV cache incoherency issues
* Don't re-acquire SRCU lock in complete_emulated_io()
* Avoid NULL pointer deref if VM creation fails
* Fix race conditions between APICv disabling and vCPU creation
* Bugfixes for disabling of APICv
* Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
selftests:
* Do not use bitfields larger than 32-bits, they differ between GCC and clang
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJi3KUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMhvQf/Yncfg3MkOvKsVxnCe7diKDTI/E2n
wBGNIcL8r7L9oIltHL4Mh7JQTacHFQOZ9PQ30NO1p+pznZ03e8LR59IF1JpP7VOU
sWrLZ5a4bIAEjOpA7Jxcee6hUBwewBauDgFLbb+YAI2lAahiH7jVfywDRife/c3k
N2LjeA75K8UvMiDCfjxxxerFJK91zaqjWlUNF2OhtFp/5pnMfS+nli9Q8QS837pZ
oUf+0Beb2RpSHan+wbYVU7X3ZLwtpR0M3w3uXOG+X3as56wDf26znXS02aSwa45x
lfX+pqJfmb4vCJJDXt6avH27EVgTq0Vew+BhQHG3VLRO6uxZ+smX6qmsuw==
=kvbw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"The main and larger change here is a workaround for AMD's lack of
cache coherency for encrypted-memory guests.
I have another patch pending, but it's waiting for review from the
architecture maintainers.
RISC-V:
- Remove 's' & 'u' as valid ISA extension
- Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
x86:
- Fix NMI watchdog in guests on AMD
- Fix for SEV cache incoherency issues
- Don't re-acquire SRCU lock in complete_emulated_io()
- Avoid NULL pointer deref if VM creation fails
- Fix race conditions between APICv disabling and vCPU creation
- Bugfixes for disabling of APICv
- Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
selftests:
- Do not use bitfields larger than 32-bits, they differ between GCC
and clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: selftests: introduce and use more page size-related constants
kvm: selftests: do not use bitfields larger than 32-bits for PTEs
KVM: SEV: add cache flush to solve SEV cache incoherency issues
KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
KVM: SVM: Simplify and harden helper to flush SEV guest page(s)
KVM: selftests: Silence compiler warning in the kvm_page_table_test
KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
KVM: SPDX style and spelling fixes
KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
KVM: nVMX: Defer APICv updates while L2 is active until L1 is active
KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
RISC-V: KVM: Restrict the extensions that can be disabled
RISC-V: KVM: Remove 's' & 'u' as valid ISA extension
It turns out that by having CONFIG_ACPI=n, we've been failing to boot
additional CPUs, and so these systems were functionally UP. The code
bloat is unfortunate for build times, but I don't see an alternative. So
this commit sets CONFIG_ACPI=y for x86_64 and i686 configs.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use bpf_link_create() API in fexit_stress test to attach FEXIT programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Kui-Feng Lee <kuifeng@fb.com>
Link: https://lore.kernel.org/bpf/20220421033945.3602803-4-andrii@kernel.org
test_cpu.c includes testcases that validate the cgroup cpu controller.
This patch adds a new testcase called test_cpucg_weight_underprovisioned()
that verifies that processes with different cpu.weight that are all running
on an underprovisioned system, still get roughly the same amount of cpu
time.
Because test_cpucg_weight_underprovisioned() is very similar to
test_cpucg_weight_overprovisioned(), this patch also pulls the common logic
into a separate helper function that is invoked from both testcases, and
which uses function pointers to invoke the unique portions of the
testcases.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
test_cpu.c includes testcases that validate the cgroup cpu controller.
This patch adds a new testcase called test_cpucg_weight_overprovisioned()
that verifies the expected behavior of creating multiple processes with
different cpu.weight, on a system that is overprovisioned.
So as to avoid code duplication, this patch also updates cpu_hog_func_param
to take a new hog_clock_type enum which informs how time is counted in
hog_cpus_timed() (either process time or wall clock time).
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
test_cpu.c includes testcases that validate the cgroup cpu controller.
This patch adds a new testcase called test_cpucg_stats() that verifies the
expected behavior of the cpu.stat interface. In doing so, we define a
new hog_cpus_timed() function which takes a cpu_hog_func_param struct
that configures how many CPUs it uses, and how long it runs. Future
patches will also spawn threads that hog CPUs, so this function will
eventually serve those use-cases as well.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup selftests suite currently contains tests that validate various
aspects of cgroup, such as validating the expected behavior for memory
controllers, the expected behavior of cgroup.procs, etc. There are no tests
that validate the expected behavior of the cgroup cpu controller.
This patch therefore adds a new test_cpu.c file that will contain cpu
controller testcases. The file currently only contains a single testcase
that validates creating nested cgroups with cgroup.subtree_control
including cpu. Future patches will add more sophisticated testcases that
validate functional aspects of the cpu controller.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Turn kmem_cache_alloc() into a wrapper around kmem_cache_alloc_lru().
Fixes: 9bbdc0f324 ("xarray: use kmem_cache_alloc_lru to allocate xa_node")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Li Wang <liwang@redhat.com>
Merge misc fixes from Andrew Morton:
"13 patches.
Subsystems affected by this patch series: mm (memory-failure, memcg,
userfaultfd, hugetlbfs, mremap, oom-kill, kasan, hmm), and kcov"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/mmu_notifier.c: fix race in mmu_interval_notifier_remove()
kcov: don't generate a warning on vm_insert_page()'s failure
MAINTAINERS: add Vincenzo Frascino to KASAN reviewers
oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup
selftest/vm: add skip support to mremap_test
selftest/vm: support xfail in mremap_test
selftest/vm: verify remap destination address in mremap_test
selftest/vm: verify mmap addr in mremap_test
mm, hugetlb: allow for "high" userspace addresses
userfaultfd: mark uffd_wp regardless of VM_WRITE flag
memcg: sync flush only if periodic flush is delayed
mm/memory-failure.c: skip huge_zero_page in memory_failure()
mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()
The xz -9 option leads to an unnecessarily too large dictionary that
isn't really suitable for the kernel firmware loader. Pass the
dictionary size explicitly, instead.
While we're at it, make the xz command call defined in $RUN_XZ for
simplicity.
Fixes: 108ae07c50 ("selftests: firmware: Add compressed firmware tests")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220421152908.4718-3-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow the mremap test to be skipped due to errors such as failing to
parse the mmap_min_addr sysctl.
Link: https://lkml.kernel.org/r/20220420215721.4868-4-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use ksft_test_result_xfail for the tests which are expected to fail.
Link: https://lkml.kernel.org/r/20220420215721.4868-3-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because mremap does not have a MAP_FIXED_NOREPLACE flag, it can destroy
existing mappings. This causes a segfault when regions such as text are
remapped and the permissions are changed.
Verify the requested mremap destination address does not overlap any
existing mappings by using mmap's MAP_FIXED_NOREPLACE flag. Keep
incrementing the destination address until a valid mapping is found or
fail the current test once the max address is reached.
Link: https://lkml.kernel.org/r/20220420215721.4868-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoid calling mmap with requested addresses that are less than the
system's mmap_min_addr. When run as root, mmap returns EACCES when
trying to map addresses < mmap_min_addr. This is not one of the error
codes for the condition to retry the mmap in the test.
Rather than arbitrarily retrying on EACCES, don't attempt an mmap until
addr > vm.mmap_min_addr.
Add a munmap call after an alignment check as the mappings are retained
after the retry and can reach the vm.max_map_count sysctl.
Link: https://lkml.kernel.org/r/20220420215721.4868-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clean up code that was hardcoding masks for various fields,
now that the masks are included in processor.h.
For more cleanup, define PAGE_SIZE and PAGE_MASK just like in Linux.
PAGE_SIZE in particular was defined by several tests.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Red Hat's QE team reported test failure on access_tracking_perf_test:
Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages
guest physical test memory offset: 0x3fffbffff000
Populating memory : 0.684014577s
Writing to populated memory : 0.006230175s
Reading from populated memory : 0.004557805s
==== Test Assertion Failure ====
lib/kvm_util.c:1411: false
pid=125806 tid=125809 errno=4 - Interrupted system call
1 0x0000000000402f7c: addr_gpa2hva at kvm_util.c:1411
2 (inlined by) addr_gpa2hva at kvm_util.c:1405
3 0x0000000000401f52: lookup_pfn at access_tracking_perf_test.c:98
4 (inlined by) mark_vcpu_memory_idle at access_tracking_perf_test.c:152
5 (inlined by) vcpu_thread_main at access_tracking_perf_test.c:232
6 0x00007fefe9ff81ce: ?? ??:0
7 0x00007fefe9c64d82: ?? ??:0
No vm physical memory at 0xffbffff000
I can easily reproduce it with a Intel(R) Xeon(R) CPU E5-2630 with 46 bits
PA.
It turns out that the address translation for clearing idle page tracking
returned a wrong result; addr_gva2gpa()'s last step, which is based on
"pte[index[0]].pfn", did the calculation with 40 bits length and the
high 12 bits got truncated. In above case the GPA address to be returned
should be 0x3fffbffff000 for GVA 0xc0000000, but it got truncated into
0xffbffff000 and the subsequent gpa2hva lookup failed.
The width of operations on bit fields greater than 32-bit is
implementation defined, and differs between GCC (which uses the bitfield
precision) and clang (which uses 64-bit arithmetic), so this is a
potential minefield. Remove the bit fields and using manual masking
instead.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2075036
Reported-by: Nana Liu <nanliu@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current release - regressions:
- rxrpc: restore removed timer deletion
Current release - new code bugs:
- gre: fix device lookup for l3mdev use-case
- xfrm: fix egress device lookup for l3mdev use-case
Previous releases - regressions:
- sched: cls_u32: fix netns refcount changes in u32_change()
- smc: fix sock leak when release after smc_shutdown()
- xfrm: limit skb_page_frag_refill use to a single page
- eth: atlantic: invert deep par in pm functions, preventing null
derefs
- eth: stmmac: use readl_poll_timeout_atomic() in atomic state
Previous releases - always broken:
- gre: fix skb_under_panic on xmit
- openvswitch: fix OOB access in reserve_sfa_size()
- dsa: hellcreek: calculate checksums in tagger
- eth: ice: fix crash in switchdev mode
- eth: igc:
- fix infinite loop in release_swfw_sync
- fix scheduling while atomic
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmJhLbcSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOknxkP/jiAATyBt/HQFykQNiZ7cdrcv1gzJ3Lg
BmrV1QmbrNwfffBtmBHRliP7x0vNF6fV8LUKjfyQh1YgJw8I9F/FDH/1fojhBZq/
JJpZrh+TFikBBM4RDMJ0aQi6ssOEo8S9gfN4W48F/49O4S3Q/Gbgv7Lk0jL8utRz
7RgGUVxX+xOSklvh2Tn/xHdYPeebPhLojiKhmH+l6xghyDEUHkemF3AkLwV9QMnq
LXmNP4y100xcdCW1bLbyVcq0lbwdLSg4SL+2wC2bvgEDRR0MUezQyNxD6Oqrmusn
sASZYgNK92R9ekLBqTX/QwV/XIT+17hclTk4u0eV8GnemnibqOq7DhDqtKyeAzbD
mfU6Z5Ku6LuXA1U+2w1jxnd4cJTacA+dCRKcQD91ReguBbCd6zOweB996iBNLucK
Kf+r6qWWLxt+JmhSexb/T+oQHsdgvIPSQXNHUH2W8w+2DdTB/EPcSL76DlbZUxrP
up4EC3Nr3oxJjHbv7Iq4d9mHuRlwoOOpNJ3mARlfRDL6iuL0zECTweST3qT9YyIH
Cz4FGj7kwEDTxGtufoTVia+/JmS39f2lBrMKuhbTVo+qcYhs3zJM4Ki9bAgOKXqI
Qf+I73x9yQZ182afq4DsRXLnq/BajmRMyX2/kebY8KsARzRsPAktBhsT17SI6tUG
3MiLiHiIb0qM
=thBq
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from xfrm and can.
Current release - regressions:
- rxrpc: restore removed timer deletion
Current release - new code bugs:
- gre: fix device lookup for l3mdev use-case
- xfrm: fix egress device lookup for l3mdev use-case
Previous releases - regressions:
- sched: cls_u32: fix netns refcount changes in u32_change()
- smc: fix sock leak when release after smc_shutdown()
- xfrm: limit skb_page_frag_refill use to a single page
- eth: atlantic: invert deep par in pm functions, preventing null
derefs
- eth: stmmac: use readl_poll_timeout_atomic() in atomic state
Previous releases - always broken:
- gre: fix skb_under_panic on xmit
- openvswitch: fix OOB access in reserve_sfa_size()
- dsa: hellcreek: calculate checksums in tagger
- eth: ice: fix crash in switchdev mode
- eth: igc:
- fix infinite loop in release_swfw_sync
- fix scheduling while atomic"
* tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
drivers: net: hippi: Fix deadlock in rr_close()
selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets
selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets
nfc: MAINTAINERS: add Bug entry
net: stmmac: Use readl_poll_timeout_atomic() in atomic state
doc/ip-sysctl: add bc_forwarding
netlink: reset network and mac headers in netlink_dump()
net: mscc: ocelot: fix broken IP multicast flooding
net: dsa: hellcreek: Calculate checksums in tagger
net: atlantic: invert deep par in pm functions, preventing null derefs
can: isotp: stop timeout monitoring when no first frame was sent
bonding: do not discard lowest hash bit for non layer3+4 hashing
net: lan966x: Make sure to release ptp interrupt
ipv6: make ip6_rt_gc_expire an atomic_t
net: Handle l3mdev in ip_tunnel_init_flow
l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu
net/sched: cls_u32: fix possible leak in u32_init_knode()
net/sched: cls_u32: fix netns refcount changes in u32_change()
powerpc: Update MAINTAINERS for ibmvnic and VAS
net: restore alpha order to Ethernet devices in config
...
When compiling kvm_page_table_test.c, I get this compiler warning
with gcc 11.2:
kvm_page_table_test.c: In function 'pre_init_before_test':
../../../../tools/include/linux/kernel.h:44:24: warning: comparison of
distinct pointer types lacks a cast
44 | (void) (&_max1 == &_max2); \
| ^~
kvm_page_table_test.c:281:21: note: in expansion of macro 'max'
281 | alignment = max(0x100000, alignment);
| ^~~
Fix it by adjusting the type of the absolute value.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20220414103031.565037-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switching to libbpf 1.0 API broke test_lpm_map and test_lru_map as error
reporting changed. Instead of setting errno and returning -1 bpf calls
now return -Exxx directly.
Drop errno checks and look at return code directly.
Fixes: b858ba8c52 ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20220421094320.1563570-1-asavkov@redhat.com
I am getting the following compilation error for prog_tests/uprobe_autoattach.c:
tools/testing/selftests/bpf/prog_tests/uprobe_autoattach.c: In function ‘test_uprobe_autoattach’:
./test_progs.h:209:26: error: pointer ‘mem’ may be used after ‘free’ [-Werror=use-after-free]
The value of mem is now used in one of the asserts, which is why it may be
confusing compilers. However, it is not dereferenced. Silence this by moving
free(mem) after the assert block.
Fixes: 1717e24801 ("selftests/bpf: Uprobe tests should verify param/return values")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220421132317.1583867-1-asavkov@redhat.com
Switching to libbpf 1.0 API broke test_sock and test_sysctl as they
check for return of bpf_prog_attach to be exactly -1. Switch the check
to '< 0' instead.
Fixes: b858ba8c52 ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20220421130104.1582053-1-asavkov@redhat.com
The torture.sh script provides extra memory for scftorture and rcuscale.
However, the total memory provided is only 1G, which is less than the
2G that is required for KASAN testing. This commit therefore ups the
torture.sh script's 1G to 2G.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that the Tasks RCU flavors are selected by their users rather than
by the rcutorture scenarios, torture.sh fails when attempting to run
NOPREEMPT scenarios for refscale and rcuscale. This commit therefore
makes torture.sh specify CONFIG_TASKS_TRACE_RCU=y to avoid such failure.
Why not also CONFIG_TASKS_RCU? Because tracing selects this one.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
KASAN allots significant memory to track allocation state, and the amount
of memory has increased recently, which results in frequent OOMs on a
few of the rcutorture scenarios. This commit therefore provides 2G of
memory for --kasan runs, up from the 512M default.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, torture.sh saves only the build output and exit code from the
"make allmodconfig" test. This commit also saves the .config file.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is an extraneous "scf" in the per_version_boot_params shell function
used by scftorture. No harm done in that it is just passed as an argument
to the /init program in initrd, but this commit nevertheless removes it.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that CONFIG_PREEMPT_DYNAMIC=y is the default, kernels that are
ostensibly built with CONFIG_PREEMPT_NONE=y or CONFIG_PREEMPT_VOLUNTARY=y
are now actually built with CONFIG_PREEMPT=y, but are by default booted
so as to disable preemption. Although this allows much more flexibility
from a single kernel binary, it means that the current rcutorture
scenarios won't find build errors that happen only when preemption is
fully disabled at build time.
This commit therefore adds CONFIG_PREEMPT_DYNAMIC=n to several scenarios,
and while in the area switches one from CONFIG_PREEMPT_NONE=y to
CONFIG_PREEMPT_VOLUNTARY=y to add coverage of this Kconfig option.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit passes the csdlock_debug=1 kernel parameter in order to
enable CSD-lock stall reports for torture.sh scftorure runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvm-again.sh script reruns an previously built set of kernels, so
the vmlinux files are associated with that previous run, not this on.
This results in kvm-find_errors.sh reporting spurious failed-build errors.
This commit therefore omits the vmlinux check for kvm-again.sh runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adjusts the scftorture PREEMPT and NOPREEMPT scenarios to
account for the TASKS_RCU Kconfig option being explicitly selected rather
than computed in isolation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds rcuscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of rcuscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds rcuscale, whether built-in or as
a module, in which case RCU Tasks is (unnecessarily) built. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of rcuscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds refscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of refscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds refscale, whether built-in or as a
module, in which case RCU Tasks is (unnecessarily) built in. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of refscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcutorture test suite makes double use of the rcutorture.stat_interval
module parameter. As its name suggests, it controls the frequency
of statistics printing, but it also controls the rcu_torture_writer()
stall timeout. The current setting of 15 seconds works surprisingly well.
However, given that the RCU tasks stall-warning timeout is ten -minutes-,
15 seconds is too short for TASKS02, which runs a non-preemptible kernel
on a single CPU.
This commit therefore adds checks for per-scenario specification of the
rcutorture.stat_interval module parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that CONFIG_PREEMPT_DYNAMIC=y is the default, TASKS02 no longer
builds a pure non-preemptible kernel that uses Tiny RCU. This commit
therefore fixes this new hole in rcutorture testing by adding
CONFIG_PREEMPT_DYNAMIC=n to the TASKS02 rcutorture scenario.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_RUDE_RCU, whether anything else
needs Tasks Rude RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Rude.
However, there is a need to select CONFIG_TASKS_RUDE_RCU for testing
purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is
thus a CONFIG_FORCE_TASKS_RUDE_RCU that selects CONFIG_TASKS_RUDE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds rcutorture, whether built-in or as
a module, in which case RCU Tasks is (unnecessarily) used. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of rcutorture
from the presence of RCU Tasks.
However, there is a need to select CONFIG_TASKS_RCU for testing purposes.
Except that casual users must not be bothered with questions -- for them,
this needs to be fully automated. There is thus a CONFIG_FORCE_TASKS_RCU
that selects CONFIG_TASKS_RCU, is user-selectable, but which depends
on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_TRACE_RCU, whether anything else
needs Tasks Trace RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Trace.
However, there is a need to select CONFIG_TASKS_TRACE_RCU for
testing purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is thus
a CONFIG_FORCE_TASKS_TRACE_RCU that selects CONFIG_TASKS_TRACE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, any kernel built with CONFIG_PREEMPTION=y also gets
CONFIG_TASKS_RCU=y, which is not helpful to people trying to build
preemptible kernels of minimal size.
Because CONFIG_TASKS_RCU=y is needed only in kernels doing tracing of
one form or another, this commit moves from TASKS_RCU deciding when it
should be enabled to the tracing Kconfig options explicitly selecting it.
This allows building preemptible kernels without TASKS_RCU, if desired.
This commit also updates the SRCU-N and TREE09 rcutorture scenarios
in order to avoid Kconfig errors that would otherwise result from
CONFIG_TASKS_RCU being selected without its CONFIG_RCU_EXPERT dependency
being met.
[ paulmck: Apply BPF_SYSCALL feedback from Andrii Nakryiko. ]
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Use bpf_prog_test_run_opts to test the skb_load_bytes function. Tests
the behavior when offset is greater than INT_MAX or a normal value.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220416105801.88708-4-liujian56@huawei.com
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes: d01724dd2a ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes: 94d302deae ("selftests: mlxsw: Add a test for VxLAN flooding")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop duplicate macro min() definition in mq_perf_tests.c, use MIN() in
sys/param.h instead.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This is the mips variant of commit <3990b5baf225> ("selftests/ftrace:
Add s390 support for kprobe args tests").
Signed-off-by: Ze Zhang <zhangze@loongson.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This is the mips variant of commit <3990b5baf225> ("selftests/ftrace:
Add s390 support for kprobe args tests").
Signed-off-by: Ze Zhang <zhangze@loongson.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a few test cases that ensure we catch cases of badly ordered type
tags in modifier chains.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220419164608.1990559-3-memxor@gmail.com
Take advantage of new libbpf feature for declarative non-autoloaded BPF
program SEC() definitions in few test that test single program at a time
out of many available programs within the single BPF object.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220419002452.632125-2-andrii@kernel.org
The llvm patch [1] enabled opaque pointer which caused selftest
'exhandler' failure.
...
; work = task->task_works;
7: (79) r1 = *(u64 *)(r6 +2120) ; R1_w=ptr_callback_head(off=0,imm=0) R6_w=ptr_task_struct(off=0,imm=0)
; func = work->func;
8: (79) r2 = *(u64 *)(r1 +8) ; R1_w=ptr_callback_head(off=0,imm=0) R2_w=scalar()
; if (!work && !func)
9: (4f) r1 |= r2
math between ptr_ pointer and register with unbounded min value is not allowed
below is insn 10 and 11
10: (55) if r1 != 0 goto +5
11: (18) r1 = 0 ll
...
In llvm, the code generation of 'r1 |= r2' happened in codegen
selectiondag phase due to difference of opaque pointer vs. non-opaque pointer.
Without [1], the related code looks like:
r2 = *(u64 *)(r6 + 2120)
r1 = *(u64 *)(r2 + 8)
if r2 != 0 goto +6 <LBB0_4>
if r1 != 0 goto +5 <LBB0_4>
r1 = 0 ll
...
I haven't found a good way in llvm to fix this issue. So let us workaround the
problem first so bpf CI won't be blocked.
[1] https://reviews.llvm.org/D123300
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220419050900.3136024-1-yhs@fb.com
This is a pre-req to add separate logging for each subtest in
test_progs.
Move all the mutable test data to the test_result struct.
Move per-test init/de-init into the run_one_test function.
Consolidate data aggregation and final log output in
calculate_and_print_summary function.
As a side effect, this patch fixes double counting of errors
for subtests and possible duplicate output of subtest log
on failures.
Also, add prog_tests_framework.c test to verify some of the
counting logic.
As part of verification, confirmed that number of reported
tests is the same before and after the change for both parallel
and sequential test execution.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220418222507.1726259-1-mykolal@fb.com
Introduce basic line card manipulation which consists of provisioning,
unprovisioning and activation of a line card.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new neighbour cache entry in STALE state for routers on receiving
an unsolicited (gratuitous) neighbour advertisement with
target link-layer-address option specified.
This is similar to the arp_accept configuration for IPv4.
A new sysctl endpoint is created to turn on this behaviour:
/proc/sys/net/ipv6/conf/interface/accept_unsolicited_na.
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to test various backward-edge control flow integrity methods,
add a test that manipulates the return address on the stack. Currently
only arm64 Pointer Authentication and Shadow Call Stack is supported.
$ echo CFI_BACKWARD | cat >/sys/kernel/debug/provoke-crash/DIRECT
Under SCS, successful test of the mitigation is reported as:
lkdtm: Performing direct entry CFI_BACKWARD
lkdtm: Attempting unchecked stack return address redirection ...
lkdtm: ok: redirected stack return address.
lkdtm: Attempting checked stack return address redirection ...
lkdtm: ok: control flow unchanged.
Under PAC, successful test of the mitigation is reported by the PAC
exception handler:
lkdtm: Performing direct entry CFI_BACKWARD
lkdtm: Attempting unchecked stack return address redirection ...
lkdtm: ok: redirected stack return address.
lkdtm: Attempting checked stack return address redirection ...
Unable to handle kernel paging request at virtual address bfffffc0088d0514
Mem abort info:
ESR = 0x86000004
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
[bfffffc0088d0514] address between user and kernel address ranges
...
If the CONFIGs are missing (or the mitigation isn't working), failure
is reported as:
lkdtm: Performing direct entry CFI_BACKWARD
lkdtm: Attempting unchecked stack return address redirection ...
lkdtm: ok: redirected stack return address.
lkdtm: Attempting checked stack return address redirection ...
lkdtm: FAIL: stack return address was redirected!
lkdtm: This is probably expected, since this kernel was built *without* CONFIG_ARM64_PTR_AUTH_KERNEL=y nor CONFIG_SHADOW_CALL_STACK=y
Co-developed-by: Dan Li <ashimida@linux.alibaba.com>
Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20220416001103.1524653-1-keescook@chromium.org
This Kselftest fixes update consists of a mqueue perf test memory leak
bug fix. mq_perf_tests fail to call CPU_FREE to free memory allocated
by CPU_SET.
-----BEGIN PGP SIGNATURE-----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=+5jP
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"A mqueue perf test memory leak bug fix.
mq_perf_tests failed to call CPU_FREE to free memory allocated by
CPU_SET"
* tag 'linux-kselftest-fixes-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu set
+WARNING: Possible comma where semicolon could be used
+#397: FILE: tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c:700:
++ tmr.type = KVM_XEN_VCPU_ATTR_TYPE_TIMER,
++ vcpu_ioctl(vm, VCPU_ID, KVM_XEN_VCPU_GET_ATTR, &tmr);
Fixes: 25eaeebe71 ("KVM: x86/xen: Add self tests for KVM_XEN_HVM_CONFIG_EVTCHN_SEND")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-4-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge branch for features that did not make it into 5.18:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add boilerplate test loop in test to run all tests
in fib_rule_tests.sh
Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cxl_dvsec_decode_init() is tasked with checking whether legacy DVSEC
range based decode is in effect, or whether HDM can be enabled / already
is enabled. As such it either succeeds or fails and that result is the
return value. The @do_hdm_init variable is misleading in the case where
HDM operation is already found to be active, so just call it @retval.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/164730736435.3806189.2537160791687837469.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* Miscellaneous bugfixes
* A small cleanup for the new workqueue code
* Documentation syntax fix
RISC-V:
* Remove hgatp zeroing in kvm_arch_vcpu_put()
* Fix alignment of the guest_hang() in KVM selftest
* Fix PTE A and D bits in KVM selftest
* Missing #include in vcpu_fp.c
ARM:
* Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
* Fix the MMU write-lock not being taken on THP split
* Fix mixed-width VM handling
* Fix potential UAF when debugfs registration fails
* Various selftest updates for all of the above
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJVtdMUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO33QgAiPh80xUkYfnl8FVN440S5F7UOPQ2
Cs/PbroNoP+Oz2GoG07aaqnUkFFApeBE5S+VMu1zhRNAernqpreN64/Y2iNaz0Y6
+MbvEX0FhQRW0UZJIF2m49ilgO8Gkt6aEpVRulq5G9w4NWiH1PtR25FVXfDMi8OG
xdw4x1jwXNI9lOQJ5EpUKVde3rAbxCfoC6hCTh5pCNd9oLuVeLfnC+Uv91fzXltl
EIeBlV0/mAi3RLp2E/AX38WP6ucMZqOOAy91/RTqX6oIx/7QL28ZNHXVrwQ67Hkd
pAr3MAk84tZL58lnosw53i5aXAf9CBp0KBnpk2KGutfRNJ4Vzs1e+DZAJA==
=vqAv
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86:
- Miscellaneous bugfixes
- A small cleanup for the new workqueue code
- Documentation syntax fix
RISC-V:
- Remove hgatp zeroing in kvm_arch_vcpu_put()
- Fix alignment of the guest_hang() in KVM selftest
- Fix PTE A and D bits in KVM selftest
- Missing #include in vcpu_fp.c
ARM:
- Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
- Fix the MMU write-lock not being taken on THP split
- Fix mixed-width VM handling
- Fix potential UAF when debugfs registration fails
- Various selftest updates for all of the above"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (24 commits)
KVM: x86: hyper-v: Avoid writing to TSC page without an active vCPU
KVM: SVM: Do not activate AVIC for SEV-enabled guest
Documentation: KVM: Add SPDX-License-Identifier tag
selftests: kvm: add tsc_scaling_sync to .gitignore
RISC-V: KVM: include missing hwcap.h into vcpu_fp
KVM: selftests: riscv: Fix alignment of the guest_hang() function
KVM: selftests: riscv: Set PTE A and D bits in VS-stage page table
RISC-V: KVM: Don't clear hgatp CSR in kvm_arch_vcpu_put()
selftests: KVM: Free the GIC FD when cleaning up in arch_timer
selftests: KVM: Don't leak GIC FD across dirty log test iterations
KVM: Don't create VM debugfs files outside of the VM directory
KVM: selftests: get-reg-list: Add KVM_REG_ARM_FW_REG(3)
KVM: avoid NULL pointer dereference in kvm_dirty_ring_push
KVM: arm64: selftests: Introduce vcpu_width_config
KVM: arm64: mixed-width check should be skipped for uninitialized vCPUs
KVM: arm64: vgic: Remove unnecessary type castings
KVM: arm64: Don't split hugepages outside of MMU write lock
KVM: arm64: Drop unneeded minor version check from PSCI v1.x handler
KVM: arm64: Actually prevent SMC64 SYSTEM_RESET2 from AArch32
KVM: arm64: Generally disallow SMC64 for AArch32 guests
...
It wasn't clear when SLAB_LINEAR_OVERFLOW would be expected to trip.
Explicitly describe it and include the CONFIGs in the kselftest.
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The selftest "mqueue/mq_perf_tests.c" use CPU_ALLOC to allocate
CPU set. This cpu set is used further in pthread_attr_setaffinity_np
and by pthread_create in the code. But in current code, allocated
cpu set is not freed.
Fix this issue by adding CPU_FREE in the "shutdown" function which
is called in most of the error/exit path for the cleanup. There are
few error paths which exit without using shutdown. Add a common goto
error path with CPU_FREE for these cases.
Fixes: 7820b0715b ("tools/selftests: add mq_perf_tests")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Boiler plate for testing static mdb entries. This first test verifies
adding and removing host mdb entries for all supported types: IPv4,
IPv6, and MAC multicast.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For consecutive numbers the lscpu command collapses the output and just
shows the range with start and end. The processors are numbered that
way on POWER8.
$ sudo ppc64_cpu --smt=8
$ lscpu | grep '^NUMA node'
NUMA node(s): 2
NUMA node0 CPU(s): 0-79
NUMA node8 CPU(s): 80-159
This causes the heuristic to detect the number threads per core, looking
for the number after the first comma, to fail, and QEMU aborts because of
invalid arguments.
$ lscpu | grep '^NUMA node0' | sed -e 's/^[^,-]*(,|\-)\([0-9]*\),.*$/\1/'
NUMA node0 CPU(s): 0-79
But the lscpu command shows the number of threads per core:
$ sudo ppc64_cpu --smt=8
$ lscpu | grep 'Thread(s) per core'
Thread(s) per core: 8
$ sudo ppc64_cpu --smt=off
$ lscpu | grep 'Thread(s) per core'
Thread(s) per core: 1
This commit therefore directly uses that value and replaces use of grep
with "sed -n" and its "p" command.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit weakens the checks of the kvm.sh script's --torture parameter
and the kvm-recheck.sh script's parsing so that experimental torture tests
may be created without updating these two scripts. The changes required
are to the appropriate Makefile and Kconfig file, plus a directory
whose name begins with "X" must be added to the rcutorture/configs file.
This new directory's name can then be passed in via the kvm.sh script's
--torture parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The torture.sh script normally runs unattended, so there is not much
point in the "ssh" command asking for a password. This commit therefore
adds the "-o Batchmode=yes" argument to each "ssh" command to cause it
to fail rather than ask for a password.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
An "echo" slipped in between an "ssh" and the "ret=$?" that was intended
to collect its exit code, which prevents torture.sh from detecting
"ssh" failure. This commit therefore reassociates the two.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the rcupdate.rcu_normal and rcupdate.rcu_expedited kernel
boot parameters are not regularly tested. The potential addition of
polled expedited grace-period APIs increases the amount of code that is
affected by these kernel boot parameters. This commit therefore adds a
"--do-rt" argument to torture.sh to exercise these kernel-boot options.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The tsc_scaling_sync's binary should be present in the .gitignore
file for the git to ignore it.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check dumping of mptcp listener sockets:
1. filter by dport should not return any results
2. filter by sport should return listen sk
3. filter by saddr+sport should return listen sk
4. no filter should return listen sk
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Replace unnecessary list_for_each_entry_continue() in nf_tables,
from Jakob Koschel.
2) Add struct nf_conntrack_net_ecache to conntrack event cache and
use it, from Florian Westphal.
3) Refactor ctnetlink_dump_list(), also from Florian.
4) Bump module reference counter on cttimeout object addition/removal,
from Florian.
5) Consolidate nf_log MAC printer, from Phil Sutter.
6) Add basic logging support for unknown ethertype, from Phil Sutter.
7) Consolidate check for sysctl nf_log_all_netns toggle, also from Phil.
8) Replace hardcode value in nft_bitwise, from Jeremy Sowden.
9) Rename BASIC-like goto tags in nft_bitwise to more meaningful names,
also from Jeremy.
10) nft_fib support for reverse path filtering with policy-based routing
on iif. Extend selftests to cover for this new usecase, from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Its now possible to use fib expression in the forward chain (where both
the input and output interfaces are known).
Add a simple test case for this.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We have switched to memcg-based memory accouting and thus the rlimit is
not needed any more. LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK was introduced in
libbpf for backward compatibility, so we can use it instead now. After
this change, the header tools/testing/selftests/bpf/bpf_rlimit.h can be
removed.
This patch also removes the useless header sys/resource.h from many files
in tools/testing/selftests/bpf/.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220409125958.92629-3-laoar.shao@gmail.com
Improve subtest selection logic when using -t/-a/-d parameters.
In particular, more than one subtest can be specified or a
combination of tests / subtests.
-a send_signal -d send_signal/send_signal_nmi* - runs send_signal
test without nmi tests
-a send_signal/send_signal_nmi*,find_vma - runs two send_signal
subtests and find_vma test
-a 'send_signal*' -a find_vma -d send_signal/send_signal_nmi* -
runs 2 send_signal test and find_vma test. Disables two send_signal
nmi subtests
-t send_signal -t find_vma - runs two *send_signal* tests and one
*find_vma* test
This will allow us to have granular control over which subtests
to disable in the CI system instead of disabling whole tests.
Also, add new selftest to avoid possible regression when
changing prog_test test name selection logic.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220409001750.529930-1-mykolal@fb.com
- Fix a compile error in the nvdimm unit tests
- Fix a shadowed variable warning in the CXL PCI driver
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYlIY6QAKCRDfioYZHlFs
Z0aeAQDDYcicYRhLZ3Ljbg6stitBIumpdVcKDHm4WkC9gbmB4QEArnXLpcHPWyAa
zmgc1Yrp9gOnpNSRMog9Wc8NaR45KA8=
=Ov5t
-----END PGP SIGNATURE-----
Merge tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull cxl and nvdimm fixes from Dan Williams:
- Fix a compile error in the nvdimm unit tests
- Fix a shadowed variable warning in the CXL PCI driver
* tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
cxl/pci: Drop shadowed variable
tools/testing/nvdimm: Fix security_init() symbol collision
The guest_hang() function is used as the default exception handler
for various KVM selftests applications by setting it's address in
the vstvec CSR. The vstvec CSR requires exception handler base address
to be at least 4-byte aligned so this patch fixes alignment of the
guest_hang() function.
Fixes: 3e06cdf105 ("KVM: selftests: Add initial support for RISC-V
64-bit")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Supporting hardware updates of PTE A and D bits is optional for any
RISC-V implementation so current software strategy is to always set
these bits in both G-stage (hypervisor) and VS-stage (guest kernel).
If PTE A and D bits are not set by software (hypervisor or guest)
then RISC-V implementations not supporting hardware updates of these
bits will cause traps even for perfectly valid PTEs.
Based on above explanation, the VS-stage page table created by various
KVM selftest applications is not correct because PTE A and D bits are
not set. This patch fixes VS-stage page table programming of PTE A and
D bits for KVM selftests.
Fixes: 3e06cdf105 ("KVM: selftests: Add initial support for RISC-V
64-bit")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-09
We've added 63 non-merge commits during the last 9 day(s) which contain
a total of 68 files changed, 4852 insertions(+), 619 deletions(-).
The main changes are:
1) Add libbpf support for USDT (User Statically-Defined Tracing) probes.
USDTs are an abstraction built on top of uprobes, critical for tracing
and BPF, and widely used in production applications, from Andrii Nakryiko.
2) While Andrii was adding support for x86{-64}-specific logic of parsing
USDT argument specification, Ilya followed-up with USDT support for s390
architecture, from Ilya Leoshkevich.
3) Support name-based attaching for uprobe BPF programs in libbpf. The format
supported is `u[ret]probe/binary_path:[raw_offset|function[+offset]]`, e.g.
attaching to libc malloc can be done in BPF via SEC("uprobe/libc.so.6:malloc")
now, from Alan Maguire.
4) Various load/store optimizations for the arm64 JIT to shrink the image
size by using arm64 str/ldr immediate instructions. Also enable pointer
authentication to verify return address for JITed code, from Xu Kuohai.
5) BPF verifier fixes for write access checks to helper functions, e.g.
rd-only memory from bpf_*_cpu_ptr() must not be passed to helpers that
write into passed buffers, from Kumar Kartikeya Dwivedi.
6) Fix overly excessive stack map allocation for its base map structure and
buckets which slipped-in from cleanups during the rlimit accounting removal
back then, from Yuntao Wang.
7) Extend the unstable CT lookup helpers for XDP and tc/BPF to report netfilter
connection tracking tuple direction, from Lorenzo Bianconi.
8) Improve bpftool dump to show BPF program/link type names, Milan Landaverde.
9) Minor cleanups all over the place from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits)
bpf: Fix excessive memory allocation in stack_map_alloc()
selftests/bpf: Fix return value checks in perf_event_stackmap test
selftests/bpf: Add CO-RE relos into linked_funcs selftests
libbpf: Use weak hidden modifier for USDT BPF-side API functions
libbpf: Don't error out on CO-RE relos for overriden weak subprogs
samples, bpf: Move routes monitor in xdp_router_ipv4 in a dedicated thread
libbpf: Allow WEAK and GLOBAL bindings during BTF fixup
libbpf: Use strlcpy() in path resolution fallback logic
libbpf: Add s390-specific USDT arg spec parsing logic
libbpf: Make BPF-side of USDT support work on big-endian machines
libbpf: Minor style improvements in USDT code
libbpf: Fix use #ifdef instead of #if to avoid compiler warning
libbpf: Potential NULL dereference in usdt_manager_attach_usdt()
selftests/bpf: Uprobe tests should verify param/return values
libbpf: Improve string parsing for uprobe auto-attach
libbpf: Improve library identification for uprobe binary path resolution
selftests/bpf: Test for writes to map key from BPF helpers
selftests/bpf: Test passing rdonly mem to global func
bpf: Reject writes for PTR_TO_MAP_KEY in check_helper_mem_access
bpf: Check PTR_TO_MEM | MEM_RDONLY in check_helper_mem_access
...
====================
Link: https://lore.kernel.org/r/20220408231741.19116-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bpf_get_stackid() function may also return 0 on success as per UAPI BPF
helper documentation. Therefore, correct checks from 'val > 0' to 'val >= 0'
to ensure that they cover all possible success return values.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220408041452.933944-1-ytcoode@gmail.com
Add CO-RE relocations into __weak subprogs for multi-file linked_funcs
selftest to make sure libbpf handles such combination well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220408181425.2287230-4-andrii@kernel.org
Starting with the new perf-event support in the nvdimm core, the
nfit_test mock module stops compiling. Rename its security_init() to
nfit_security_init().
tools/testing/nvdimm/test/nfit.c:1845:13: error: conflicting types for ‘security_init’; have ‘void(struct nfit_test *)’
1845 | static void security_init(struct nfit_test *t)
| ^~~~~~~~~~~~~
In file included from ./include/linux/perf_event.h:61,
from ./include/linux/nd.h:11,
from ./drivers/nvdimm/nd-core.h:11,
from tools/testing/nvdimm/test/nfit.c:19:
Fixes: 9a61d0838c ("drivers/nvdimm: Add nvdimm pmu structure")
Cc: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/164904238610.1330275.1889212115373993727.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
uprobe/uretprobe tests don't do any validation of arguments/return values,
and without this we can't be sure we are attached to the right function,
or that we are indeed attached to a uprobe or uretprobe. To fix this
record argument and return value for auto-attached functions and ensure
these match expectations. Also need to filter by pid to ensure we do
not pick up stray malloc()s since auto-attach traces libc system-wide.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1649245431-29956-4-git-send-email-alan.maguire@oracle.com
In order to correctly destroy a VM, all references to the VM must be
freed. The arch_timer selftest creates a VGIC for the guest, which
itself holds a reference to the VM.
Close the GIC FD when cleaning up a VM.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220406235615.1447180-4-oupton@google.com
dirty_log_perf_test instantiates a VGICv3 for the guest (if supported by
hardware) to reduce the overhead of guest exits. However, the test does
not actually close the GIC fd when cleaning up the VM between test
iterations, meaning that the VM is never actually destroyed in the
kernel.
While this is generally a bad idea, the bug was detected from the kernel
spewing about duplicate debugfs entries as subsequent VMs happen to
reuse the same FD even though the debugfs directory is still present.
Abstract away the notion of setup/cleanup of the GIC FD from the test
by creating arch-specific helpers for test setup/cleanup. Close the GIC
FD on VM cleanup and do nothing for the other architectures.
Fixes: c340f7899a ("KVM: selftests: Add vgic initialization for dirty log perf test for ARM")
Reviewed-by: Jing Zhang <jingzhangos@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220406235615.1447180-3-oupton@google.com
When testing a kernel with commit a5905d6af4 ("KVM: arm64:
Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated")
get-reg-list output
vregs: Number blessed registers: 234
vregs: Number registers: 238
vregs: There are 1 new registers.
Consider adding them to the blessed reg list with the following lines:
KVM_REG_ARM_FW_REG(3),
vregs: PASS
...
That output inspired two changes: 1) add the new register to the
blessed list and 2) explain why "Number registers" is actually four
larger than "Number blessed registers" (on the system used for
testing), even though only one register is being stated as new.
The reason is that some registers are host dependent and they get
filtered out when comparing with the blessed list. The system
used for the test apparently had three filtered registers.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220316125129.392128-1-drjones@redhat.com
Alexei Starovoitov says:
====================
pull-request: bpf 2022-04-06
We've added 8 non-merge commits during the last 8 day(s) which contain
a total of 9 files changed, 139 insertions(+), 36 deletions(-).
The main changes are:
1) rethook related fixes, from Jiri and Masami.
2) Fix the case when tracing bpf prog is attached to struct_ops, from Martin.
3) Support dual-stack sockets in bpf_tcp_check_syncookie, from Maxim.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets
bpf: Support dual-stack sockets in bpf_tcp_check_syncookie
bpf: selftests: Test fentry tracing a struct_ops program
bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT
rethook: Fix to use WRITE_ONCE() for rethook:: Handler
selftests/bpf: Fix warning comparing pointer to 0
bpf: Fix sparse warnings in kprobe_multi_resolve_syms
bpftool: Explicit errno handling in skeletons
====================
Link: https://lore.kernel.org/r/20220407031245.73026-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When invoking bpf_for_each_map_elem callback, we are passed a
PTR_TO_MAP_KEY, previously writes to this through helper may be allowed,
but the fix in previous patches is meant to prevent that case. The test
case tries to pass it as writable memory to helper, and fails test if it
succeeds to pass the verifier.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220319080827.73251-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add two test cases, one pass read only map value pointer to global
func, which should be rejected. The same code checks it for kfunc, so
that is covered as well. Second one tries to use the missing check for
PTR_TO_MEM's MEM_RDONLY flag and tries to write to a read only memory
pointer. Without prior patches, both of these tests fail.
Reviewed-by: Hao Luo <haoluo@google.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220319080827.73251-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_map_value_size() uses num_possible_cpus() to determine map size, but
some of the tests only allocate enough memory for online cpus. This
results in out-of-bound writes in userspace during bpf(BPF_MAP_LOOKUP_ELEM)
syscalls in cases when number of online cpus is lower than the number of
possible cpus. Fix by switching from get_nprocs_conf() to
bpf_num_possible_cpus() when determining the number of processors in
these tests (test_progs/netcnt and test_cgroup_storage).
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220406085408.339336-1-asavkov@redhat.com
The function does not check that parsing_end is false after parsing
argument. Thus, if the final part of the argument is something like '4-',
which is invalid, parse_num_list() will discard it instead of returning
-EINVAL.
Before:
$ ./test_progs -n 2,4-
#2 atomic_bounds:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
After:
$ ./test_progs -n 2,4-
Failed to parse test numbers.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220406003622.73539-1-ytcoode@gmail.com
The previous commit fixed support for dual-stack sockets in
bpf_tcp_check_syncookie. This commit adjusts the selftest to verify the
fixed functionality.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Arthur Fabre <afabre@cloudflare.com>
Link: https://lore.kernel.org/bpf/20220406124113.2795730-2-maximmi@nvidia.com
Introduce a test for aarch64 that ensures non-mixed-width vCPUs
(all 64bit vCPUs or all 32bit vcPUs) can be configured, and
mixed-width vCPUs cannot be configured.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220329031924.619453-3-reijiw@google.com
Extend urandom_read helper binary to include USDTs of 4 combinations:
semaphore/semaphoreless (refcounted and non-refcounted) and based in
executable or shared library. We also extend urandom_read with ability
to report it's own PID to parent process and wait for parent process to
ready itself up for tracing urandom_read. We utilize popen() and
underlying pipe properties for proper signaling.
Once urandom_read is ready, we add few tests to validate that libbpf's
USDT attachment handles all the above combinations of semaphore (or lack
of it) and static or shared library USDTs. Also, we validate that libbpf
handles shared libraries both with PID filter and without one (i.e., -1
for PID argument).
Having the shared library case tested with and without PID is important
because internal logic differs on kernels that don't support BPF
cookies. On such older kernels, attaching to USDTs in shared libraries
without specifying concrete PID doesn't work in principle, because it's
impossible to determine shared library's load address to derive absolute
IPs for uprobe attachments. Without absolute IPs, it's impossible to
perform correct look up of USDT spec based on uprobe's absolute IP (the
only kind available from BPF at runtime). This is not the problem on
newer kernels with BPF cookie as we don't need IP-to-ID lookup because
BPF cookie value *is* spec ID.
So having those two situations as separate subtests is good because
libbpf CI is able to test latest selftests against old kernels (e.g.,
4.9 and 5.5), so we'll be able to disable PID-less shared lib attachment
for old kernels, but will still leave PID-specific one enabled to validate
this legacy logic is working correctly.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20220404234202.331384-8-andrii@kernel.org
Add semaphore-based USDT to test_progs itself and write basic tests to
valicate both auto-attachment and manual attachment logic, as well as
BPF-side functionality.
Also add subtests to validate that libbpf properly deduplicates USDT
specs and handles spec overflow situations correctly, as well as proper
"rollback" of partially-attached multi-spec USDT.
BPF-side of selftest intentionally consists of two files to validate
that usdt.bpf.h header can be included from multiple source code files
that are subsequently linked into final BPF object file without causing
any symbol duplication or other issues. We are validating that __weak
maps and bpf_usdt_xxx() API functions defined in usdt.bpf.h do work as
intended.
USDT selftests utilize sys/sdt.h header that on Ubuntu systems comes
from systemtap-sdt-devel package. But to simplify everyone's life,
including CI but especially casual contributors to bpf/bpf-next that
are trying to build selftests, I've checked in sys/sdt.h header from [0]
directly. This way it will work on all architectures and distros without
having to figure it out for every relevant combination and adding any
extra implicit package dependencies.
[0] https://sourceware.org/git?p=systemtap.git;a=blob_plain;f=includes/sys/sdt.h;h=ca0162b4dc57520b96638c8ae79ad547eb1dd3a1;hb=HEAD
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20220404234202.331384-7-andrii@kernel.org
Before, our help output contained lines like
--kconfig_add KCONFIG_ADD
--qemu_config qemu_config
--jobs jobs
They're not very helpful.
The former kind come from the automatic 'metavar' we get from argparse,
the uppercase version of the flag name.
The latter are where we manually specified metavar as the flag name.
After:
--build_dir DIR
--make_options X=Y
--kunitconfig PATH
--kconfig_add CONFIG_X=Y
--arch ARCH
--cross_compile PREFIX
--qemu_config FILE
--jobs N
--timeout SECONDS
--raw_output [{all,kunit}]
--json [FILE]
This patch tries to make the code more clear by specifying the _type_ of
input we expect, e.g. --build_dir is a DIR, --qemu_config is a FILE.
I also switched it to uppercase since it looked more clearly like
placeholder text that way.
This patch also changes --raw_output to specify `choices` to make it
more clear what the options are, and this way argparse can validate it
for us, as shown by the added test case.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
attach_probe selftest fails on aarch64 with `failed to create kprobe
'sys_nanosleep+0x0' perf event: No such file or directory`. This is
because, like on several other architectures, nanosleep has a prefix.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220404142101.27900-1-iii@linux.ibm.com
The script for checking that various lists of types in bpftool remain in
sync with the UAPI BPF header uses a regex to parse enum bpf_prog_type.
If this enum contains a set of values different from the list of program
types in bpftool, it complains.
This script should have reported the addition, some time ago, of the new
BPF_PROG_TYPE_SYSCALL, which was not reported to bpftool's program types
list. It failed to do so, because it failed to parse that new type from
the enum. This is because the new value, in the BPF header, has an
explicative comment on the same line, and the regex does not support
that.
Let's update the script to support parsing enum values when they have
comments on the same line.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220404140944.64744-1-quentin@isovalent.com
Filling log files with color codes makes diffs and other comparisons
difficult. Only emit vt100 codes when the stdout is a TTY.
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: linux-kselftest@vger.kernel.org
Cc: kunit-dev@googlegroups.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Before, kunit.py always printed "arch": "UM" in its json output, but...
1. With `kunit.py parse`, we could be parsing output from anywhere, so
we can't say that.
2. Capitalizing it is probably wrong, as it's `ARCH=um`
3. Commit 87c9c16317 ("kunit: tool: add support for QEMU") made it so
kunit.py could knowingly run a different arch, yet we'd still always
claim "UM".
This patch addresses all of those. E.g.
1.
$ ./tools/testing/kunit/kunit.py parse .kunit/test.log --json | grep -o '"arch.*' | sort -u
"arch": "",
2.
$ ./tools/testing/kunit/kunit.py run --json | ...
"arch": "um",
3.
$ ./tools/testing/kunit/kunit.py run --json --arch=x86_64 | ...
"arch": "x86_64",
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When using --json, kunit.py run/exec/parse will produce results in
KernelCI json format.
As part of that, we include the build_dir that was used, and we
(incorrectly) hardcode in the arch, etc.
We'll want a way to plumb more values (as well as the correct `arch`),
so this patch groups those fields into kunit_json.Metadata type.
This patch should have no user visible changes.
And since we only used build_dir in KunitParseRequest for json, we can
now move it out of that struct and add it into KunitExecRequest, which
needs it and used to get it via inheritance.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use a more idiomatic check that a list is non-empty (`if mylist:`) and
simplify the function body by dedenting and using a dict to map between
the kunit TestStatus enum => KernelCI json status string.
The dict hopefully makes it less likely to have bugs like commit
9a6bb30a88 ("kunit: tool: fix --json output for skipped tests").
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
--build_dir is set to a default of '.kunit' since commit ddbd60c779
("kunit: use --build_dir=.kunit as default"), but even before then it
was explicitly set to ''.
So outside of one unit test, there was no way for the build_dir to be
ever be None, and we can simplify code by fixing the unit test and
enforcing that via updated type annotations.
E.g. this lets us drop `get_file_path()` since it's now exactly
equivalent to os.path.join().
Note: there's some `if build_dir` checks that also fail if build_dir is
explicitly set to '' that just guard against passing "O=" to make.
But running `make O=` works just fine, so drop these checks.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since we formally require python3.7+ since commit df4b0807ca
("kunit: tool: Assert the version requirement"), we can just use
@dataclasses.dataclass instead.
In kunit_config.py, we used namedtuple to create a hashable type that
had `name` and `value` fields and had to subclass it to define a custom
`__str__()`.
@datalcass lets us just define one type instead.
In qemu_config.py, we use namedtuple to allow modules to define various
parameters. Using @dataclass, we can add type-annotations for all these
fields, making our code more typesafe and making it easier for users to
figure out how to define new configs.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit be886ba90c ("kunit: run kunit_tool from any directory")
introduced this variable, but it was unused even in that commit.
Since it's still unused now and callers can instead use
get_kernel_root_path(), delete this var.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently kunit_json.get_json_result() will output the JSON-ified test
output to json_path, but iff it's not "stdout".
Instead, move the responsibility entirely over to the one caller.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
FIXTURE_VARIANT data is passed to FIXTURE_SETUP and TEST_F as "variant".
In some cases, the variant will change the setup, such that expectations
also change on teardown. Also pass variant to FIXTURE_TEARDOWN.
The new FIXTURE_TEARDOWN logic is identical to that in FIXTURE_SETUP,
right above.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201210231010.420298-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kselftest test harness has traditionally not run the registered
TEARDOWN handler when a test encountered an ASSERT. This creates
unexpected situations and tests need to be very careful about using
ASSERT, which seems a needless hurdle for test writers.
Because of the harness's design for optional failure handlers, the
original implementation of ASSERT used an abort() to immediately
stop execution, but that meant the context for running teardown was
lost. Instead, use setjmp/longjmp so that teardown can be done.
Failed SETUP routines continue to not be followed by TEARDOWN, though.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
I fixed a few warnings like this in commit e2aa5e650b
("selftests: fixup build warnings in pidfd / clone3 tests"), but I
missed this one by mistake. Since this variable is unused, remove it.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The way the test target was defined before, when building with clang we
get a command line like this:
clang -Wall -Werror -g -I../../../../usr/include/ \
regression_enomem.c ../pidfd/pidfd.h -o regression_enomem
This yields an error, because clang thinks we want to produce both a *.o
file, as well as a precompiled header:
clang: error: cannot specify -o when generating multiple output files
gcc, for whatever reason, doesn't exhibit the same behavior which I
suspect is why the problem wasn't noticed before.
This can be fixed simply by using the LOCAL_HDRS infrastructure the
selftests lib.mk provides. It does the right think and marks the target
as depending on the header (so if the header changes, we rebuild), but
it filters the header out of the compiler command line, so we don't get
the error described above.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In order to successfully build all these 32bit tests, these 32bit gcc
and glibc packages, named gcc-32bit and glibc-devel-static-32bit on SUSE,
need to be installed.
This patch added this information in warn_32bit_failure.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix the following coccicheck warning:
tools/testing/selftests/proc/proc-pid-vm.c:371:26-27:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/proc/proc-pid-vm.c:420:26-27:
WARNING: Use ARRAY_SIZE
It has been tested with gcc (Debian 8.3.0-6) 8.3.0 on x86_64.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix the following coccicheck warning:
tools/testing/selftests/vDSO/vdso_test_correctness.c:309:46-47:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/vDSO/vdso_test_correctness.c:373:46-47:
WARNING: Use ARRAY_SIZE
It has been tested with gcc (Debian 8.3.0-6) 8.3.0 on x86_64.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
add tests that verify attaching by name for
1. local functions in a program
2. library functions in a shared object
...succeed for uprobe and uretprobes using new "func_name"
option for bpf_program__attach_uprobe_opts(). Also verify
auto-attach works where uprobe, path to binary and function
name are specified, but fails with -EOPNOTSUPP with a SEC
name that does not specify binary path/function.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1648654000-21758-5-git-send-email-alan.maguire@oracle.com
Now that u[ret]probes can use name-based specification, it makes
sense to add support for auto-attach based on SEC() definition.
The format proposed is
SEC("u[ret]probe/binary:[raw_offset|[function_name[+offset]]")
For example, to trace malloc() in libc:
SEC("uprobe/libc.so.6:malloc")
...or to trace function foo2 in /usr/bin/foo:
SEC("uprobe//usr/bin/foo:foo2")
Auto-attach is done for all tasks (pid -1). prog can be an absolute
path or simply a program/library name; in the latter case, we use
PATH/LD_LIBRARY_PATH to resolve the full path, falling back to
standard locations (/usr/bin:/usr/sbin or /usr/lib64:/usr/lib) if
the file is not found via environment-variable specified locations.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1648654000-21758-4-git-send-email-alan.maguire@oracle.com
Currently, when we run test_progs with just executable file name, for
example 'PATH=. test_progs-no_alu32', cd_flavor_subdir() will not check
if test_progs is running as a flavored test runner and switch into
corresponding sub-directory.
This will cause test_progs-no_alu32 executed by the
'PATH=. test_progs-no_alu32' command to run in the wrong directory and
load the wrong BPF objects.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220403135245.1713283-1-ytcoode@gmail.com
Return boolean values ("true" or "false") instead of 1 or 0 from bool
functions. This fixes the following warnings from coccicheck:
./tools/testing/selftests/bpf/progs/test_xdp_noinline.c:567:9-10: WARNING:
return of 0/1 in function 'get_packet_dst' with return type bool
./tools/testing/selftests/bpf/progs/test_l4lb_noinline.c:221:9-10: WARNING:
return of 0/1 in function 'get_packet_dst' with return type bool
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/1648779354-14700-1-git-send-email-baihaowen@meizu.com
Since commit 6521f89170 ("namei: prepare for idmapped mounts")
vfs_link's prototype was changed, the kprobe definition in
profiler selftest in turn wasn't updated. The result is that all
argument after the first are now stored in different registers. This
means that self-test has been broken ever since. Fix it by updating the
kprobe definition accordingly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220331140949.1410056-1-nborisov@suse.com
- Make the prctl() for enabling dynamic XSTATE components correct so it
adds the newly requested feature to the permission bitmap instead of
overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor cannot
emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it takes
the feature set of the fpstate buffer into account. The feature sets
can differ between host and guest buffers. Guest buffers do not contain
supervisor states. So far this was not an issue, but with enabling
PASID it needs to be handled in the buffer offset calculation and in
the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the values
early in the FPU/XSTATE code.
- Enable CONFIG_WERROR for X86.
- Make the X86 defconfigs more useful by adapting them to Y2022 reality.
-----BEGIN PGP SIGNATURE-----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=GK27
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
I made a stupid typo when adding the nexthop route warning selftest and
added both $IP and ip after it (double ip) on the cleanup path. The
error doesn't show up when running the test, but obviously it doesn't
cleanup properly after it.
Fixes: 392baa339c ("selftests: net: add delete nexthop route warning test")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20220225145304.36166-4-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add test cases for timers in the past, and reading the status of a timer
which has already fired.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20220309143835.253911-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Test a combination of event channel send, poll and timer operations.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20220303154127.202856-18-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for SCHEDOP_poll hypercall.
This implementation is optimized for polling for a single channel, which
is what Linux does. Polling for multiple channels is not especially
efficient (and has not been tested).
PV spinlocks slow path uses this hypercall, and explicitly crash if it's
not supported.
[ dwmw2: Rework to use kvm_vcpu_halt(), not supported for 32-bit guests ]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-17-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a test that asserts KVM rewrites guest hypercall instructions to
match the running architecture (VMCALL on VMX, VMMCALL on SVM).
Additionally, test that with the quirk disabled, KVM no longer rewrites
guest instructions and instead injects a #UD.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220316005538.2282772-3-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The test fails:
# ./test_offload.py
[...]
Test bpftool bound info reporting (own ns)...
FAIL: 3 BPF maps loaded, expected 2
File "/root/bpf-next/tools/testing/selftests/bpf/./test_offload.py", line 1177, in <module>
check_dev_info(False, "")
File "/root/bpf-next/tools/testing/selftests/bpf/./test_offload.py", line 645, in check_dev_info
maps = bpftool_map_list(expected=2, ns=ns)
File "/root/bpf-next/tools/testing/selftests/bpf/./test_offload.py", line 190, in bpftool_map_list
fail(True, "%d BPF maps loaded, expected %d" %
File "/root/bpf-next/tools/testing/selftests/bpf/./test_offload.py", line 86, in fail
tb = "".join(traceback.extract_stack().format())
Some base maps do not have names and they cannot be added due to compatibility
with older kernels, see [0]. So, just skip the unnamed maps.
[0] https://lore.kernel.org/bpf/CAEf4BzY66WPKQbDe74AKZ6nFtZjq5e+G3Ji2egcVytB9R6_sGQ@mail.gmail.com/
Signed-off-by: Yauheni Kaliuta <ykaliuta@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220329081100.9705-1-ykaliuta@redhat.com
Was never used in bpf_sk_assign_test(), and was removed from handle_{tcp,udp}()
in commit 0b9ad56b1e ("selftests/bpf: Use SOCKMAP for server sockets in
bpf_sk_assign test").
Fixes: 0b9ad56b1e ("selftests/bpf: Use SOCKMAP for server sockets in bpf_sk_assign test")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220329154914.3718658-1-eyal.birger@gmail.com
Add a test which causes a WARNING on kernels which treat a
nexthop route like a normal route when comparing for deletion and a
device is specified. That is, a route is found but we hit a warning while
matching it. The warning is from fib_info_nh() in include/net/nexthop.h
because we run it on a fib_info with nexthop object. The call chain is:
inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a
nexthop fib_info and also with fc_oif set thus calling fib_info_nh on
the fib_info and triggering the warning).
Repro steps:
$ ip nexthop add id 12 via 172.16.1.3 dev veth1
$ ip route add 172.16.101.1/32 nhid 12
$ ip route delete 172.16.101.1/32 dev veth1
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
-----BEGIN PGP SIGNATURE-----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=84rW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
Features:
- kprobes: rethook: x86: replace kretprobe trampoline with rethook
Current release - regressions:
- sfc: avoid null-deref on systems without NUMA awareness
in the new queue sizing code
Current release - new code bugs:
- vxlan: do not feed vxlan_vnifilter_dump_dev with non-vxlan devices
- eth: lan966x: fix null-deref on PHY pointer in timestamp ioctl
when interface is down
Previous releases - always broken:
- openvswitch: correct neighbor discovery target mask field
in the flow dump
- wireguard: ignore v6 endpoints when ipv6 is disabled and fix a leak
- rxrpc: fix call timer start racing with call destruction
- rxrpc: fix null-deref when security type is rxrpc_no_security
- can: fix UAF bugs around echo skbs in multiple drivers
Misc:
- docs: move netdev-FAQ to the "process" section of the documentation
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5Bvy
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking updates from Jakub Kicinski:
"Networking fixes and rethook patches.
Features:
- kprobes: rethook: x86: replace kretprobe trampoline with rethook
Current release - regressions:
- sfc: avoid null-deref on systems without NUMA awareness in the new
queue sizing code
Current release - new code bugs:
- vxlan: do not feed vxlan_vnifilter_dump_dev with non-vxlan devices
- eth: lan966x: fix null-deref on PHY pointer in timestamp ioctl when
interface is down
Previous releases - always broken:
- openvswitch: correct neighbor discovery target mask field in the
flow dump
- wireguard: ignore v6 endpoints when ipv6 is disabled and fix a leak
- rxrpc: fix call timer start racing with call destruction
- rxrpc: fix null-deref when security type is rxrpc_no_security
- can: fix UAF bugs around echo skbs in multiple drivers
Misc:
- docs: move netdev-FAQ to the 'process' section of the
documentation"
* tag 'net-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
vxlan: do not feed vxlan_vnifilter_dump_dev with non vxlan devices
openvswitch: Add recirc_id to recirc warning
rxrpc: fix some null-ptr-deref bugs in server_key.c
rxrpc: Fix call timer start racing with call destruction
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware
net: hns3: fix the concurrency between functions reading debugfs
docs: netdev: move the netdev-FAQ to the process pages
docs: netdev: broaden the new vs old code formatting guidelines
docs: netdev: call out the merge window in tag checking
docs: netdev: add missing back ticks
docs: netdev: make the testing requirement more stringent
docs: netdev: add a question about re-posting frequency
docs: netdev: rephrase the 'should I update patchwork' question
docs: netdev: rephrase the 'Under review' question
docs: netdev: shorten the name and mention msgid for patch status
docs: netdev: note that RFC postings are allowed any time
docs: netdev: turn the net-next closed into a Warning
docs: netdev: move the patch marking section up
docs: netdev: minor reword
docs: netdev: replace references to old archives
...
The LLVM make variable allows a developer to quickly switch between the
GNU and LLVM tools. However, it does not handle versioned binaries, such
as the ones shipped by Debian, as LLVM=1 just defines the tool variables
with the unversioned binaries.
There was some discussion during the review of the patch that introduces
LLVM=1 around versioned binaries, ultimately coming to the conclusion
that developers can just add the folder that contains the unversioned
binaries to their PATH, as Debian's versioned suffixed binaries are
really just symlinks to the unversioned binaries in /usr/lib/llvm-#/bin:
$ realpath /usr/bin/clang-14
/usr/lib/llvm-14/bin/clang
$ PATH=/usr/lib/llvm-14/bin:$PATH make ... LLVM=1
However, that can be cumbersome to developers who are constantly testing
series with different toolchains and versions. It is simple enough to
support these versioned binaries directly in the Kbuild system by
allowing the developer to specify the version suffix with LLVM=, which
is shorter than the above suggestion:
$ make ... LLVM=-14
It does not change the meaning of LLVM=1 (which will continue to use
unversioned binaries) and it does not add too much additional complexity
to the existing $(LLVM) code, while allowing developers to quickly test
their series with different versions of the whole LLVM suite of tools.
Some developers may build LLVM from source but not add the binaries to
their PATH, as they may not want to use that toolchain systemwide.
Support those developers by allowing them to supply the directory that
the LLVM tools are available in, as it is no more complex to support
than the version suffix change above.
$ make ... LLVM=/path/to/llvm/
Update and reorder the documentation to reflect these new additions.
At the same time, notate that LLVM=0 is not the same as just omitting it
altogether, which has confused people in the past.
Link: https://lore.kernel.org/r/20200317215515.226917-1-ndesaulniers@google.com/
Link: https://lore.kernel.org/r/20220224151322.072632223@infradead.org/
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This patch tests attaching an fentry prog to a struct_ops prog.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220330011502.2985292-1-kafai@fb.com
The seed_rng() function was written to work across lots of old kernels,
back when WireGuard used a big compatibility layer. Now that things have
evolved, we can vastly simplify this, by just marking the RNG as seeded.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add perf support for nvdimm events, initially only for 'papr_scm'
devices.
- Deprecate the 'block aperture' support in libnvdimm, it only ever
existed in the specification, not in shipping product.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYjvuTwAKCRDfioYZHlFs
Z4JbAQCViArRj/yxffDB4kg4FNlOgAQbxPblC07E06UX8Jj2DgD+NY2YJIucz0qb
87v0+CorJjtoy5dJ9vxAR8keojT3RQ0=
=oAwm
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The update for this cycle includes the deprecation of block-aperture
mode and a new perf events interface for the papr_scm nvdimm driver.
The perf events approach was acked by PeterZ.
- Add perf support for nvdimm events, initially only for 'papr_scm'
devices.
- Deprecate the 'block aperture' support in libnvdimm, it only ever
existed in the specification, not in shipping product"
* tag 'libnvdimm-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/blk: Fix title level
MAINTAINERS: remove section LIBNVDIMM BLK: MMIO-APERTURE DRIVER
powerpc/papr_scm: Fix build failure when
drivers/nvdimm: Fix build failure when CONFIG_PERF_EVENTS is not set
nvdimm/region: Delete nd_blk_region infrastructure
ACPI: NFIT: Remove block aperture support
nvdimm/namespace: Delete nd_namespace_blk
nvdimm/namespace: Delete blk namespace consideration in shared paths
nvdimm/blk: Delete the block-aperture window driver
nvdimm/region: Fix default alignment for small regions
docs: ABI: sysfs-bus-nvdimm: Document sysfs event format entries for nvdimm pmu
powerpc/papr_scm: Add perf interface support
drivers/nvdimm: Add perf interface to expose nvdimm performance stats
drivers/nvdimm: Add nvdimm pmu structure
Avoid pointer type value compared with 0 to make code clear. Reported by
coccicheck:
tools/testing/selftests/bpf/progs/map_ptr_kern.c:370:21-22:
WARNING comparing pointer to 0
tools/testing/selftests/bpf/progs/map_ptr_kern.c:397:21-22:
WARNING comparing pointer to 0
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/1648605588-19269-1-git-send-email-baihaowen@meizu.com
- do not zero buffer in set_memory_decrypted (Kirill A. Shutemov)
- fix return value of dma-debug __setup handlers (Randy Dunlap)
- swiotlb cleanups (Robin Murphy)
- remove most remaining users of the pci-dma-compat.h API
(Christophe JAILLET)
- share the ABI header for the DMA map_benchmark with userspace
(Tian Tao)
- update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen)
- remove CONFIG_DMA_REMAP (me)
-----BEGIN PGP SIGNATURE-----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=C+Es
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- do not zero buffer in set_memory_decrypted (Kirill A. Shutemov)
- fix return value of dma-debug __setup handlers (Randy Dunlap)
- swiotlb cleanups (Robin Murphy)
- remove most remaining users of the pci-dma-compat.h API
(Christophe JAILLET)
- share the ABI header for the DMA map_benchmark with userspace
(Tian Tao)
- update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen)
- remove CONFIG_DMA_REMAP (me)
* tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: benchmark: extract a common header file for map_benchmark definition
dma-debug: fix return value of __setup handlers
dma-mapping: remove CONFIG_DMA_REMAP
media: v4l2-pci-skeleton: Remove usage of the deprecated "pci-dma-compat.h" API
rapidio/tsi721: Remove usage of the deprecated "pci-dma-compat.h" API
sparc: Remove usage of the deprecated "pci-dma-compat.h" API
agp/intel: Remove usage of the deprecated "pci-dma-compat.h" API
alpha: Remove usage of the deprecated "pci-dma-compat.h" API
MAINTAINERS: update maintainer list of DMA MAPPING BENCHMARK
swiotlb: simplify array allocation
swiotlb: tidy up includes
swiotlb: simplify debugfs setup
swiotlb: do not zero buffer in set_memory_decrypted()
llvm upstream patch ([1]) added to issue warning for code like
void test() {
int j = 0;
for (int i = 0; i < 1000; i++)
j++;
return;
}
This triggered several errors in selftests/bpf build since
compilation flag -Werror is used.
...
test_lpm_map.c:212:15: error: variable 'n_matches' set but not used [-Werror,-Wunused-but-set-variable]
size_t i, j, n_matches, n_matches_after_delete, n_nodes, n_lookups;
^
test_lpm_map.c:212:26: error: variable 'n_matches_after_delete' set but not used [-Werror,-Wunused-but-set-variable]
size_t i, j, n_matches, n_matches_after_delete, n_nodes, n_lookups;
^
...
prog_tests/get_stack_raw_tp.c:32:15: error: variable 'cnt' set but not used [-Werror,-Wunused-but-set-variable]
static __u64 cnt;
^
...
For test_lpm_map.c, 'n_matches'/'n_matches_after_delete' are changed to be volatile
in order to silent the warning. I didn't remove these two declarations since
they are referenced in a commented code which might be used by people in certain
cases. For get_stack_raw_tp.c, the variable 'cnt' is removed.
[1] https://reviews.llvm.org/D122271
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220325200304.2915588-1-yhs@fb.com
14c174633f ("random: remove unused tracepoints") removed all the
tracepoints from drivers/char/random.c, one of which,
random:urandom_read, was used by stacktrace_build_id selftest to trigger
stack trace capture.
Fix breakage by switching to kprobing urandom_read() function.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220325225643.2606-1-andrii@kernel.org
Current release - regressions:
- llc: only change llc->dev when bind() succeeds, fix null-deref
Current release - new code bugs:
- smc: fix a memory leak in smc_sysctl_net_exit()
- dsa: realtek: make interface drivers depend on OF
Previous releases - regressions:
- sched: act_ct: fix ref leak when switching zones
Previous releases - always broken:
- netfilter: egress: report interface as outgoing
- vsock/virtio: enable VQs early on probe and finish the setup
before using them
Misc:
- memcg: enable accounting for nft objects
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sOIu
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- llc: only change llc->dev when bind() succeeds, fix null-deref
Current release - new code bugs:
- smc: fix a memory leak in smc_sysctl_net_exit()
- dsa: realtek: make interface drivers depend on OF
Previous releases - regressions:
- sched: act_ct: fix ref leak when switching zones
Previous releases - always broken:
- netfilter: egress: report interface as outgoing
- vsock/virtio: enable VQs early on probe and finish the setup before
using them
Misc:
- memcg: enable accounting for nft objects"
* tag 'net-5.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (39 commits)
Revert "selftests: net: Add tls config dependency for tls selftests"
net/smc: Send out the remaining data in sndbuf before close
net: move net_unlink_todo() out of the header
net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator
net: bnxt_ptp: fix compilation error
selftests: net: Add tls config dependency for tls selftests
memcg: enable accounting for nft objects
net/sched: act_ct: fix ref leak when switching zones
net/smc: fix a memory leak in smc_sysctl_net_exit()
selftests: tls: skip cmsg_to_pipe tests with TLS=n
octeontx2-af: initialize action variable
net: sparx5: switchdev: fix possible NULL pointer dereference
net/x25: Fix null-ptr-deref caused by x25_disconnect
qlcnic: dcb: default to returning -EOPNOTSUPP
net: sparx5: depends on PTP_1588_CLOCK_OPTIONAL
net: hns3: fix phy can not link up when autoneg off and reset
net: hns3: add NULL pointer check for hns3_set/get_ringparam()
net: hns3: add netdev reset check for hns3_set_tunable()
net: hns3: clean residual vf config after disable sriov
net: hns3: add max order judgement for tx spare buffer
...
-----BEGIN PGP SIGNATURE-----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=PhGM
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Forced transitions block only to-be-removed livepatches [Chengming]
- Detect when ftrace handler could not be disabled in self-tests [David]
- Calm down warning from a static analyzer [Tom]
* tag 'livepatching-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Reorder to use before freeing a pointer
livepatch: Don't block removal of patches that are safe to unload
livepatch: Skip livepatch tests if ftrace cannot be configured
selftest net tls test cases need TLS=m without this the test hangs.
Enabling config TLS solves this problem and runs to complete.
- CONFIG_TLS=m
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* A small cleanup of unused variable in __next_mem_pfn_range_in_zone
* Initial test suite to simulate memblock behaviour in userspace
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmI9bD4THHJwcHRAbGlu
dXguaWJtLmNvbQAKCRA5A4Ymyw79kXwhB/wNXR1wUb/eD3eKD+aNa2KMY5+8csjD
ghJph8wQmM9U9hsLViv3/M/H5+bY/s0riZNulKYrcmzW2BgIzF2ebcoqgfQ89YGV
bLx7lMJGxG/lCglur9m6KnOF89//Owq6Vfk7Jd6jR/F+43JO/3+5siCbTo6NrbVw
3DjT/WzvaICA646foyFTh8WotnIRbB2iYX1k/vIA3gwJ2C6n7WwoKzxU3ulKMUzg
hVlhcuTVnaV4mjFBbl23wC7i4l9dgPO9M4ZrTtlEsNHeV6uoFYRObwy6/q/CsBqI
avwgV0bQDch+QuCteUXcqIcnBpcUAfGxgiqp2PYX4lXA4gYTbo7plTna
=IemP
-----END PGP SIGNATURE-----
Merge tag 'memblock-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
"Test suite and a small cleanup:
- A small cleanup of unused variable in __next_mem_pfn_range_in_zone
- Initial test suite to simulate memblock behaviour in userspace"
* tag 'memblock-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: (27 commits)
memblock tests: Add TODO and README files
memblock tests: Add memblock_alloc_try_nid tests for bottom up
memblock tests: Add memblock_alloc_try_nid tests for top down
memblock tests: Add memblock_alloc_from tests for bottom up
memblock tests: Add memblock_alloc_from tests for top down
memblock tests: Add memblock_alloc tests for bottom up
memblock tests: Add memblock_alloc tests for top down
memblock tests: Add simulation of physical memory
memblock tests: Split up reset_memblock function
memblock tests: Fix testing with 32-bit physical addresses
memblock: __next_mem_pfn_range_in_zone: remove unneeded local variable nid
memblock tests: Add memblock_free tests
memblock tests: Add memblock_add_node test
memblock tests: Add memblock_remove tests
memblock tests: Add memblock_reserve tests
memblock tests: Add memblock_add tests
memblock tests: Add memblock reset function
memblock tests: Add skeleton of the memblock simulator
tools/include: Add debugfs.h stub
tools/include: Add pfn.h stub
...
These are negative tests, testing TLS code rejects certain
operations. They won't pass without TLS enabled, pure TCP
accepts those operations.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: d87d67fd61 ("selftests: tls: test splicing cmsgs")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The purpose of the last test case is to test VXLAN encapsulation and
decapsulation when the underlay lookup takes place in a non-default VRF.
This is achieved by enslaving the physical device of the tunnel to a
VRF.
The binding of the VXLAN UDP socket to the VRF happens when the VXLAN
device itself is opened, not when its physical device is opened. This
was also mentioned in the cited commit ("tests that moving the underlay
from a VRF to another works when down/up the VXLAN interface"), but the
test did something else.
Fix it by reopening the VXLAN device instead of its physical device.
Before:
# ./test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [FAIL]
After:
# ./test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [ OK ]
Fixes: 03f1c26b1c ("test/net: Add script for VXLAN underlay in a VRF")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220324200514.1638326-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Highlights:
- new drivers:
- AMD Host System Management Port (HSMP)
- Intel Software Defined Silicon
- removed drivers (functionality folded into other drivers):
- intel_cht_int33fe_microb
- surface3_button
- amd-pmc:
- s2idle bug-fixes
- Support for AMD Spill to DRAM STB feature
- hp-wmi:
- Fix SW_TABLET_MODE detection method (and other fixes)
- Support omen thermal profile policy v1
- serial-multi-instantiate:
- Add SPI device support
- Add support for CS35L41 amplifiers used in new laptops
- think-lmi:
- syfs-class-firmware-attributes Certificate authentication support
- thinkpad_acpi:
- Fixes + quirks
- Add platform_profile support on AMD based ThinkPads
- x86-android-tablets
- Improve Asus ME176C / TF103C support
- Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets
- Lots of various other small fixes and hardware-id additions
The following is an automated git shortlog grouped by driver:
ACPI / scan:
- Create platform device for CS35L41
ACPI / x86:
- Add support for LPS0 callback handler
ALSA:
- hda/realtek: Add support for HP Laptops
Add AMD system management interface:
- Add AMD system management interface
Add Intel Software Defined Silicon driver:
- Add Intel Software Defined Silicon driver
Documentation:
- syfs-class-firmware-attributes: Lenovo Certificate support
- Add x86/amd_hsmp driver
ISST:
- Fix possible circular locking dependency detected
Input:
- soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons
Merge remote-tracking branch 'pdx86/platform-drivers-x86-pinctrl-pmu_clk' into review-hans-gcc12:
- Merge remote-tracking branch 'pdx86/platform-drivers-x86-pinctrl-pmu_clk' into review-hans-gcc12
Merge tag 'platform-drivers-x86-serial-multi-instantiate-1' into review-hans:
- Merge tag 'platform-drivers-x86-serial-multi-instantiate-1' into review-hans
Replace acpi_bus_get_device():
- Replace acpi_bus_get_device()
amd-pmc:
- Only report STB errors when STB enabled
- Drop CPU QoS workaround
- Output error codes in messages
- Move to later in the suspend process
- Validate entry into the deepest state on resume
- uninitialized variable in amd_pmc_s2d_init()
- Set QOS during suspend on CZN w/ timer wakeup
- Add support for AMD Spill to DRAM STB feature
- Correct usage of SMU version
- Make amd_pmc_stb_debugfs_fops static
asus-tf103c-dock:
- Make 2 global structs static
asus-wmi:
- Fix regression when probing for fan curve control
hp-wmi:
- support omen thermal profile policy v1
- Changing bios_args.data to be dynamically allocated
- Fix 0x05 error code reported by several WMI calls
- Fix SW_TABLET_MODE detection method
- Fix hp_wmi_read_int() reporting error (0x05)
huawei-wmi:
- check the return value of device_create_file()
i2c-multi-instantiate:
- Rename it for a generic serial driver name
int3472:
- Add terminator to gpiod_lookup_table
intel-uncore-freq:
- fix uncore_freq_common_init() error codes
intel_cht_int33fe:
- Move to intel directory
- Drop Lenovo Yogabook YB1-X9x code
- Switch to DMI modalias based loading
intel_crystal_cove_charger:
- Fix IRQ masking / unmasking
lg-laptop:
- Move setting of battery charge limit to common location
pinctrl:
- baytrail: Add pinconf group + function for the pmu_clk
platform/dcdbas:
- move EXPORT_SYMBOL after function
platform/surface:
- Remove Surface 3 Button driver
- surface3-wmi: Simplify resource management
- Replace acpi_bus_get_device()
- Reinstate platform dependency
platform/x86/intel-uncore-freq:
- Split common and enumeration part
platform/x86/intel/uncore-freq:
- Display uncore current frequency
- Use sysfs API to create attributes
- Move to uncore-frequency folder
selftests:
- sdsi: test sysfs setup
serial-multi-instantiate:
- Add SPI support
- Reorganize I2C functions
spi:
- Add API to count spi acpi resources
- Support selection of the index of the ACPI Spi Resource before alloc
- Create helper API to lookup ACPI info for spi device
- Make spi_alloc_device and spi_add_device public again
surface:
- surface3_power: Fix battery readings on batteries without a serial number
think-lmi:
- Certificate authentication support
thinkpad_acpi:
- consistently check fan_get_status return.
- Don't use test_bit on an integer
- Fix compiler warning about uninitialized err variable
- clean up dytc profile convert
- Add PSC mode support
- Add dual fan probe
- Add dual-fan quirk for T15g (2nd gen)
- Fix incorrect use of platform profile on AMD platforms
- Add quirk for ThinkPads without a fan
tools arch x86:
- Add Intel SDSi provisiong tool
touchscreen_dmi:
- Add info for the RWC NANOTE P8 AY07J 2-in-1
x86-android-tablets:
- Depend on EFI and SPI
- Lenovo Yoga Tablet 2 830/1050 sound support
- Workaround Lenovo Yoga Tablet 2 830/1050 poweroff hang
- Add Lenovo Yoga Tablet 2 830 / 1050 data
- Fix EBUSY error when requesting IOAPIC IRQs
- Minor charger / fuel-gauge improvements
- Add Nextbook Ares 8 data
- Add IRQ to Asus ME176C accelerometer info
- Add lid-switch gpio-keys pdev to Asus ME176C + TF103C
- Add x86_android_tablet_get_gpiod() helper
- Add Asus ME176C/TF103C charger and fuelgauge props
- Add battery swnode support
- Trivial typo fix for MODULE_AUTHOR
- Fix the buttons on CZC P10T tablet
- Constify the gpiod_lookup_tables arrays
- Add an init() callback to struct x86_dev_info
- Add support for disabling ACPI _AEI handlers
- Correct crystal_cove_charger module name
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmI8SjEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wYUwf/cdUMPFy5cwpHq1LuqGy+PxVCRHCe
71PFd2Ycj+HGOtrt66RxSiCC1Seb4tylr7FvudToDaqWjlBf5n6LhpDudg4ds7Qw
lCuRlaXTIrF7p3nOLIsWvJPRqacMG79KkRM62MLTS2evtRYjbnKvFzNPJPzr8827
1AhCakE92S8gkR5lUZYYHtsaz9rZ4z4TrEtjO6GdlbL2bDw0l18dNNwdMomfVpNS
bBIHIDLeufDuMJ4PxIHlE5MB3AuZAuc0HTJWihozyJX/h5FMGI6qVm0/s9RAfHgX
XdMCpADtS/JjHCmkFgLZYIzvXTxwQVZRo5VO0Wrv5Mis6gSpxJXCd0aKlA==
=1x9/
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"New drivers:
- AMD Host System Management Port (HSMP)
- Intel Software Defined Silicon
Removed drivers (functionality folded into other drivers):
- intel_cht_int33fe_microb
- surface3_button
amd-pmc:
- s2idle bug-fixes
- Support for AMD Spill to DRAM STB feature
hp-wmi:
- Fix SW_TABLET_MODE detection method (and other fixes)
- Support omen thermal profile policy v1
serial-multi-instantiate:
- Add SPI device support
- Add support for CS35L41 amplifiers used in new laptops
think-lmi:
- syfs-class-firmware-attributes Certificate authentication support
thinkpad_acpi:
- Fixes + quirks
- Add platform_profile support on AMD based ThinkPads
x86-android-tablets:
- Improve Asus ME176C / TF103C support
- Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets
Lots of various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (60 commits)
platform/x86: think-lmi: Certificate authentication support
Documentation: syfs-class-firmware-attributes: Lenovo Certificate support
platform/x86: amd-pmc: Only report STB errors when STB enabled
platform/x86: amd-pmc: Drop CPU QoS workaround
platform/x86: amd-pmc: Output error codes in messages
platform/x86: amd-pmc: Move to later in the suspend process
ACPI / x86: Add support for LPS0 callback handler
platform/x86: thinkpad_acpi: consistently check fan_get_status return.
platform/x86: hp-wmi: support omen thermal profile policy v1
platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated
platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls
platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method
platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)
platform/x86: amd-pmc: Validate entry into the deepest state on resume
platform/x86: thinkpad_acpi: Don't use test_bit on an integer
platform/x86: thinkpad_acpi: Fix compiler warning about uninitialized err variable
platform/x86: thinkpad_acpi: clean up dytc profile convert
platform/x86: x86-android-tablets: Depend on EFI and SPI
platform/x86: amd-pmc: uninitialized variable in amd_pmc_s2d_init()
platform/x86: intel-uncore-freq: fix uncore_freq_common_init() error codes
...
Merge yet more updates from Andrew Morton:
"This is the material which was staged after willystuff in linux-next.
Subsystems affected by this patch series: mm (debug, selftests,
pagecache, thp, rmap, migration, kasan, hugetlb, pagemap, madvise),
and selftests"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (113 commits)
selftests: kselftest framework: provide "finished" helper
mm: madvise: MADV_DONTNEED_LOCKED
mm: fix race between MADV_FREE reclaim and blkdev direct IO read
mm: generalize ARCH_HAS_FILTER_PGPROT
mm: unmap_mapping_range_tree() with i_mmap_rwsem shared
mm: warn on deleting redirtied only if accounted
mm/huge_memory: remove stale locking logic from __split_huge_pmd()
mm/huge_memory: remove stale page_trans_huge_mapcount()
mm/swapfile: remove stale reuse_swap_page()
mm/khugepaged: remove reuse_swap_page() usage
mm/huge_memory: streamline COW logic in do_huge_pmd_wp_page()
mm: streamline COW logic in do_swap_page()
mm: slightly clarify KSM logic in do_swap_page()
mm: optimize do_wp_page() for fresh pages in local LRU pagevecs
mm: optimize do_wp_page() for exclusive pages in the swapcache
mm/huge_memory: make is_transparent_hugepage() static
userfaultfd/selftests: enable hugetlb remap and remove event testing
selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test
mm: enable MADV_DONTNEED for hugetlb mappings
kasan: disable LOCKDEP when printing reports
...
* Support for Sv57-based virtual memory.
* Various improvements for the MicroChip PolarFire SOC and the
associated Icicle dev board, which should allow upstream kernels to
boot without any additional modifications.
* An improved memmove() implementation.
* Support for the new Ssconfpmf and SBI PMU extensions, which allows for
a much more useful perf implementation on RISC-V systems.
* Support for restartable sequences.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmI96FcTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiQBFD/425+6xmoOru6Wiki3Ja0fqQToNrQyW
IbmE/8AxUP7UxMvJSNzvQm8deXgklzvmegXCtnjwZZins971vMzzDSI83k/zn8I7
m5thVC9z01BjodV+pvIp/44hS6FesolOLzkVHksX0Zh6h0iidrc34Qf5HrqvvNfN
CZ/4K1+E9ig5r9qZp4WdvocCXj+FzwF/30GjKoW9vwA599CEG/dCo+TNN9GKD6XS
k+xiUGwlIRA+kCLSPFCi7ev9XPr1tCmQB7uB8Igcvr7Y3mWl8HKfajQVXBnXNRC3
ifbDxpx1elJiLPyf7Rza8jIDwDhLQdxBiwPgDgP9h9R4x0uF4efq8PzLzFlFmaE+
9Z9thfykBb5dXYDFDje9bAOXvKnGk7Iqxdsz0qWo/ChEQawX1+11bJb0TNN8QTT9
YvlQfUXgb1dmEcj5yG2uVE1Y8L7YNLRMsZU3W3FbmPJZoavSOuU4x0yCGeLyv597
76af3nuBJ5v80Db97gu6St+HIACeevKflsZUf/8GS/p7d1DlvmrWzQUMEycxPTG9
UZpZak58jh7AqQ9JbLnavhwmeacY50vpZOw6QHGAHSN+8daCPlOHDG7Ver7Z+kNj
+srJ7iKMvLnnaEjGNgavfxdqTOme1gv4LWs/JdHYMkpphqVN92xBDJnhXTPRVZiQ
0x39vK86qtB46A==
=Omc6
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for Sv57-based virtual memory.
- Various improvements for the MicroChip PolarFire SOC and the
associated Icicle dev board, which should allow upstream kernels to
boot without any additional modifications.
- An improved memmove() implementation.
- Support for the new Ssconfpmf and SBI PMU extensions, which allows
for a much more useful perf implementation on RISC-V systems.
- Support for restartable sequences.
* tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (36 commits)
rseq/selftests: Add support for RISC-V
RISC-V: Add support for restartable sequence
MAINTAINERS: Add entry for RISC-V PMU drivers
Documentation: riscv: Remove the old documentation
RISC-V: Add sscofpmf extension support
RISC-V: Add perf platform driver based on SBI PMU extension
RISC-V: Add RISC-V SBI PMU extension definitions
RISC-V: Add a simple platform driver for RISC-V legacy perf
RISC-V: Add a perf core library for pmu drivers
RISC-V: Add CSR encodings for all HPMCOUNTERS
RISC-V: Remove the current perf implementation
RISC-V: Improve /proc/cpuinfo output for ISA extensions
RISC-V: Do no continue isa string parsing without correct XLEN
RISC-V: Implement multi-letter ISA extension probing framework
RISC-V: Extract multi-letter extension names from "riscv, isa"
RISC-V: Minimal parser for "riscv, isa" strings
RISC-V: Correctly print supported extensions
riscv: Fixed misaligned memory access. Fixed pointer comparison.
MAINTAINERS: update riscv/microchip entry
riscv: dts: microchip: add new peripherals to icicle kit device tree
...
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.
- Add support for livepatch to 32-bit.
- Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
- Merge vdso64 and vdso32 into a single directory.
- Fix build errors with newer binutils.
- Add support for UADDR64 relocations, which are emitted by some toolchains. This allows
powerpc to build with the latest lld.
- Fix (another) potential userspace r13 corruption in transactional memory handling.
- Cleanups of function descriptor handling & related fixes to LKDTM.
Thanks to: Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh Kumar K.V, Anton
Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chen
Jingwen, Christophe JAILLET, Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel
Henrique Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu Hua, Haren
Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason Wang, Jeremy Kerr, Joachim
Wiberg, Jordan Niethe, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan
Srinivasan, Mamatha Inamdar, Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal
Suchanek, Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nour-eddine
Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy Dunlap, Ritesh Harjani, Rohan
McLure, Russell Currey, Sachin Sant, Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain,
Thierry Reding, Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean, Wedson
Almeida Filho, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=8r2c
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Livepatch support for 32-bit is probably the standout new feature,
otherwise mostly just lots of bits and pieces all over the board.
There's a series of commits cleaning up function descriptor handling,
which touches a few other arches as well as LKDTM. It has acks from
Arnd, Kees and Helge.
Summary:
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.
- Add support for livepatch to 32-bit.
- Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
- Merge vdso64 and vdso32 into a single directory.
- Fix build errors with newer binutils.
- Add support for UADDR64 relocations, which are emitted by some
toolchains. This allows powerpc to build with the latest lld.
- Fix (another) potential userspace r13 corruption in transactional
memory handling.
- Cleanups of function descriptor handling & related fixes to LKDTM.
Thanks to Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh
Kumar K.V, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar
Chowdhury, Cédric Le Goater, Chen Jingwen, Christophe JAILLET,
Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel Henrique
Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu
Hua, Haren Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason
Wang, Jeremy Kerr, Joachim Wiberg, Jordan Niethe, Julia Lawall, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mamatha Inamdar,
Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal Suchanek,
Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Nour-eddine Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy
Dunlap, Ritesh Harjani, Rohan McLure, Russell Currey, Sachin Sant,
Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain, Thierry Reding,
Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean,
Wedson Almeida Filho, and YueHaibing"
* tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
powerpc/pseries: Fix use after free in remove_phb_dynamic()
powerpc/time: improve decrementer clockevent processing
powerpc/time: Fix KVM host re-arming a timer beyond decrementer range
powerpc/tm: Fix more userspace r13 corruption
powerpc/xive: fix return value of __setup handler
powerpc/64: Add UADDR64 relocation support
powerpc: 8xx: fix a return value error in mpc8xx_pic_init
powerpc/ps3: remove unneeded semicolons
powerpc/64: Force inlining of prevent_user_access() and set_kuap()
powerpc/bitops: Force inlining of fls()
powerpc: declare unmodified attribute_group usages const
powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
powerpc/secvar: fix refcount leak in format_show()
powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E
powerpc: Move C prototypes out of asm-prototypes.h
powerpc/kexec: Declare kexec_paca static
powerpc/smp: Declare current_set static
powerpc: Cleanup asm-prototypes.c
powerpc/ftrace: Use STK_GOT in ftrace_mprofile.S
powerpc/ftrace: Regroup PPC64 specific operations in ftrace_mprofile.S
...
Instead of having each time that wants to use ksft_exit() have to figure
out the internals of kselftest.h, add the helper ksft_finished() that
makes sure the passes, xfails, and skips are equal to the test plan count.
Link: https://lkml.kernel.org/r/20220201013717.2464392-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With MADV_DONTNEED support added to hugetlb mappings, mremap testing can
also be enabled for hugetlb.
Modify the tests to use madvise MADV_DONTNEED and MADV_REMOVE instead of
fallocate hole puch for releasing hugetlb pages.
Link: https://lkml.kernel.org/r/20220215002348.128823-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that MADV_DONTNEED support for hugetlb is enabled, add corresponding
tests. MADV_REMOVE has been enabled for some time, but no tests exist so
add them as well.
Link: https://lkml.kernel.org/r/20220215002348.128823-3-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PAGE_SIZE is not 4096 in many configurations, particularly ppc64 uses 64K
pages in majority of cases.
Add helpers to detect PAGE_SIZE and PAGE_SHIFT dynamically.
Without this tests are broken w.r.t reading /proc/self/pagemap
if (pread(pagemap_fd, ent, sizeof(ent),
(uintptr_t)ptr >> (PAGE_SHIFT - 3)) != sizeof(ent))
err(2, "read pagemap");
Link: https://lkml.kernel.org/r/20220307054355.149820-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add a driver for 'struct cxl_memdev' objects responsible for CXL.mem
operation as distinct from 'cxl_pci' mailbox operations. Its primary
responsibility is enumerating an endpoint 'struct cxl_port' and all the
'struct cxl_port' instances between an endpoint and the CXL platform
root.
- Add a driver for 'struct cxl_port' objects responsible for enumerating
and operating all Host-managed Device Memory (HDM) decoder resources
between the platform-level CXL memory description, all intervening host
bridges / switches, and the HDM resources in endpoints.
- Update the cxl_pci driver to validate CXL.mem operation precursors to
HDM decoder operation like ready-polling, and legacy CXL 1.1 DVSEC
based CXL.mem configuration.
- Add basic lockdep coverage for usage of device_lock() on CXL subsystem
objects similar to what exists for LIBNVDIMM. Include a compile-time
switch for which subsystem to validate at run-time.
- Update cxl_test to emulate a one level switch topology.
- Document a "Theory of Operation" for the subsystem.
- Add 'numa_node' and 'serial' attributes to cxl_memdev sysfs
- Include miscellaneous fixes for spec / QEMU CXL emulation
compatibility and static analysis reports.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYjpX6AAKCRDfioYZHlFs
ZzyxAQCztxAXj7mzkm1Qt5zZz4e7p/6sR49B03jBTfPtrEF9kQEAl9R15WVt6U+o
Ooof1XhRic3kT6e8zS3ZVKHzGduYxwM=
=mR94
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) updates from Dan Williams:
"This development cycle extends the subsystem to discover CXL resources
throughout a CXL/PCIe switch topology and respond to hot add/remove
events anywhere in that topology.
This is more foundational infrastructure in preparation for dynamic
memory region provisioning support. Recall that CXL memory regions, as
the new "Theory of Operation" section of
Documentation/driver-api/cxl/memory-devices.rst describes, bring
storage volume striping semantics to memory.
The hot add/remove behavior is validated with extensions to the
cxl_test unit test environment and this test in the cxl-cli test
suite:
https://github.com/pmem/ndctl/blob/djbw/for-74/cxl/test/cxl-topology.sh
Summary:
- Add a driver for 'struct cxl_memdev' objects responsible for
CXL.mem operation as distinct from 'cxl_pci' mailbox operations.
Its primary responsibility is enumerating an endpoint 'struct
cxl_port' and all the 'struct cxl_port' instances between an
endpoint and the CXL platform root.
- Add a driver for 'struct cxl_port' objects responsible for
enumerating and operating all Host-managed Device Memory (HDM)
decoder resources between the platform-level CXL memory
description, all intervening host bridges / switches, and the HDM
resources in endpoints.
- Update the cxl_pci driver to validate CXL.mem operation precursors
to HDM decoder operation like ready-polling, and legacy CXL 1.1
DVSEC based CXL.mem configuration.
- Add basic lockdep coverage for usage of device_lock() on CXL
subsystem objects similar to what exists for LIBNVDIMM. Include a
compile-time switch for which subsystem to validate at run-time.
- Update cxl_test to emulate a one level switch topology.
- Document a "Theory of Operation" for the subsystem.
- Add 'numa_node' and 'serial' attributes to cxl_memdev sysfs
- Include miscellaneous fixes for spec / QEMU CXL emulation
compatibility and static analysis reports"
* tag 'cxl-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (48 commits)
cxl/core/port: Fix NULL but dereferenced coccicheck error
cxl/port: Hold port reference until decoder release
cxl/port: Fix endpoint refcount leak
cxl/core: Fix cxl_device_lock() class detection
cxl/core/port: Fix unregister_port() lock assertion
cxl/regs: Fix size of CXL Capability Header Register
cxl/core/port: Handle invalid decoders
cxl/core/port: Fix / relax decoder target enumeration
tools/testing/cxl: Add a physical_node link
tools/testing/cxl: Enumerate mock decoders
tools/testing/cxl: Mock one level of switches
tools/testing/cxl: Fix root port to host bridge assignment
tools/testing/cxl: Mock dvsec_ranges()
cxl/core/port: Add endpoint decoders
cxl/core: Move target_list out of base decoder attributes
cxl/mem: Add the cxl_mem driver
cxl/core/port: Add switch port enumeration
cxl/memdev: Add numa_node attribute
cxl/pci: Emit device serial number
cxl/pci: Implement wait for media active
...
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
RISC-V:
- Prevent KVM_COMPAT from being selected
- Optimize __kvm_riscv_switch_to() implementation
- RISC-V SBI v0.3 support
s390:
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
- add Claudio Imbrenda as maintainer
- first step to do proper storage key checking
x86:
- Continue switching kvm_x86_ops to static_call(); introduce
static_call_cond() and __static_call_ret0 when applicable.
- Cleanup unused arguments in several functions
- Synthesize AMD 0x80000021 leaf
- Fixes and optimization for Hyper-V sparse-bank hypercalls
- Implement Hyper-V's enlightened MSR bitmap for nested SVM
- Remove MMU auditing
- Eager splitting of page tables (new aka "TDP" MMU only) when dirty
page tracking is enabled
- Cleanup the implementation of the guest PGD cache
- Preparation for the implementation of Intel IPI virtualization
- Fix some segment descriptor checks in the emulator
- Allow AMD AVIC support on systems with physical APIC ID above 255
- Better API to disable virtualization quirks
- Fixes and optimizations for the zapping of page tables:
- Zap roots in two passes, avoiding RCU read-side critical sections
that last too long for very large guests backed by 4 KiB SPTEs.
- Zap invalid and defunct roots asynchronously via concurrency-managed
work queue.
- Allowing yielding when zapping TDP MMU roots in response to the root's
last reference being put.
- Batch more TLB flushes with an RCU trick. Whoever frees the paging
structure now holds RCU as a proxy for all vCPUs running in the guest,
i.e. to prolongs the grace period on their behalf. It then kicks the
the vCPUs out of guest mode before doing rcu_read_unlock().
Generic:
- Introduce __vcalloc and use it for very large allocations that
need memcg accounting
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmI4fdwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMq8gf/WoeVHtw2QlL5Mmz6McvRRmPAYPLV
wLUIFNrRqRvd8Tw4kivzZoh/xTpwmnojv0YdK5SjKAiMjgv094YI1LrNp1JSPvmL
pitocMkA10RSJNWHeEMg9cMSKH0rKiqeYl6S1e2XsdB+UZZ2BINOCVtvglmjTAvJ
dFBdKdBkqjAUZbdXAGIvz4JEEER3N/LkFDKGaUGX+0QIQOzGBPIyLTxynxIDG6mt
RViCCFyXdy5NkVp5hZFm96vQ2qAlWL9B9+iKruQN++82+oqWbeTdSqPhdwF7GyFz
BfOv3gobQ2c4ef/aMLO5LswZ9joI1t/4kQbbAn6dNybpOAz/NXfDnbNefg==
=keox
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
RISC-V:
- Prevent KVM_COMPAT from being selected
- Optimize __kvm_riscv_switch_to() implementation
- RISC-V SBI v0.3 support
s390:
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
- add Claudio Imbrenda as maintainer
- first step to do proper storage key checking
x86:
- Continue switching kvm_x86_ops to static_call(); introduce
static_call_cond() and __static_call_ret0 when applicable.
- Cleanup unused arguments in several functions
- Synthesize AMD 0x80000021 leaf
- Fixes and optimization for Hyper-V sparse-bank hypercalls
- Implement Hyper-V's enlightened MSR bitmap for nested SVM
- Remove MMU auditing
- Eager splitting of page tables (new aka "TDP" MMU only) when dirty
page tracking is enabled
- Cleanup the implementation of the guest PGD cache
- Preparation for the implementation of Intel IPI virtualization
- Fix some segment descriptor checks in the emulator
- Allow AMD AVIC support on systems with physical APIC ID above 255
- Better API to disable virtualization quirks
- Fixes and optimizations for the zapping of page tables:
- Zap roots in two passes, avoiding RCU read-side critical
sections that last too long for very large guests backed by 4
KiB SPTEs.
- Zap invalid and defunct roots asynchronously via
concurrency-managed work queue.
- Allowing yielding when zapping TDP MMU roots in response to the
root's last reference being put.
- Batch more TLB flushes with an RCU trick. Whoever frees the
paging structure now holds RCU as a proxy for all vCPUs running
in the guest, i.e. to prolongs the grace period on their behalf.
It then kicks the the vCPUs out of guest mode before doing
rcu_read_unlock().
Generic:
- Introduce __vcalloc and use it for very large allocations that need
memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
KVM: use kvcalloc for array allocations
KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2
kvm: x86: Require const tsc for RT
KVM: x86: synthesize CPUID leaf 0x80000021h if useful
KVM: x86: add support for CPUID leaf 0x80000021
KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask
Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()"
kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU
KVM: arm64: fix typos in comments
KVM: arm64: Generalise VM features into a set of flags
KVM: s390: selftests: Add error memop tests
KVM: s390: selftests: Add more copy memop tests
KVM: s390: selftests: Add named stages for memop test
KVM: s390: selftests: Add macro as abstraction for MEM_OP
KVM: s390: selftests: Split memop tests
KVM: s390x: fix SCK locking
RISC-V: KVM: Implement SBI HSM suspend call
RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function
RISC-V: Add SBI HSM suspend related defines
RISC-V: KVM: Implement SBI v0.3 SRST extension
...
There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good. This
was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly
tricky and error-prone code.
There is a small merge conflict against a parisc cleanup, the
solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel. The
hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
There are some obvious conflicts against changes to the removed
files.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks.
-----BEGIN PGP SIGNATURE-----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=vtCN
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
It's been a fairly calm development cycle. There are a few
last-minute ALSA core fixes, most notably for covering PCM ioctl
races, but the most of rest are device-specific changes.
Below are some highlights:
* ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
* ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
* HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
* USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices
-----BEGIN PGP SIGNATURE-----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=5cCU
-----END PGP SIGNATURE-----
Merge tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been a fairly calm development cycle. There are a few last-minute
ALSA core fixes, most notably for covering PCM ioctl races, but the
most of rest are device-specific changes.
Below are some highlights:
ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required
for Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280,
Renesas RZ/V2L, Texas Instruments TAS585M
HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices"
* tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (486 commits)
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec
ALSA: pcm: Add stream lock during PCM reset ioctl operations
ALSA: pcm: Fix races among concurrent prealloc proc writes
ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls
ALSA: pcm: Fix races among concurrent read/write and buffer changes
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls
ASoC: atmel: mchp-pdmc: print the correct property name
MAINTAINERS: Add Shengjiu to maintainer list of sound/soc/fsl
ASoC: SOF: Add a new dai_get_clk topology IPC op
ASoC: SOF: topology: Add ops for setting up and tearing down pipelines
ASoC: SOF: expose sof_route_setup()
ASoC: SOF: Add dai_link_fixup PCM op for IPC3
ASoC: SOF: Add trigger PCM op for IPC3
ASoC: SOF: Define hw_params PCM op for IPC3
ASoC: SOF: Introduce IPC3 PCM hw_free op
ASoC: SOF: pcm: expose the sof_pcm_setup_connected_widgets() function
ASoC: SOF: Introduce IPC-specific PCM ops
ASoC: SOF: Add bytes_ext control IPC ops for IPC3
ASoC: SOF: Add bytes_get/put control IPC ops for IPC3
...
Update the arch_prctl test to check the permission bitmap whether the
requested feature is added as expected or not.
Every non-dynamic feature that is enabled is permitted already for use.
TILECFG is not dynamic feature. Ensure the bit is always on from
ARCH_GET_XCOMP_PERM.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220129173647.27981-3-chang.seok.bae@intel.com
This KUnit update for Linux 5.18-rc1 consists of:
- changes to decrease macro layering string, integer, EQ/NE asserts
- remove unused macros
- several cleanups and fixes
- new list tests for list_del_init_careful(), list_is_head() and
list_entry_is_head()
-----BEGIN PGP SIGNATURE-----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=e1/u
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- changes to decrease macro layering string, integer, EQ/NE asserts
- remove unused macros
- several cleanups and fixes
- new list tests for list_del_init_careful(), list_is_head() and
list_entry_is_head()
* tag 'linux-kselftest-kunit-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
list: test: Add a test for list_entry_is_head()
list: test: Add a test for list_is_head()
list: test: Add test for list_del_init_careful()
kunit: cleanup assertion macro internal variables
kunit: factor out str constants from binary assertion structs
kunit: consolidate KUNIT_INIT_BINARY_ASSERT_STRUCT macros
kunit: remove va_format from kunit_assert
kunit: tool: drop mostly unused KunitResult.result field
kunit: decrease macro layering for EQ/NE asserts
kunit: decrease macro layering for integer asserts
kunit: reduce layering in string assertion macros
kunit: drop unused intermediate macros for ptr inequality checks
kunit: make KUNIT_EXPECT_EQ() use KUNIT_EXPECT_EQ_MSG(), etc.
kunit: drop unused assert_type from kunit_assert and clean up macros
kunit: split out part of kunit_assert into a static const
kunit: factor out kunit_base_assert_format() call into kunit_fail()
kunit: drop unused kunit* field in kunit_assert
kunit: move check if assertion passed into the macros
kunit: add example test case showing off all the expect macros
This Kselftest test for Linux 5.18-rc1 consists of several build and
cleanup fixes.
- removing obsolete config options
- removing dependency on internal kernel macros
- adding config options
- several build fixes related to headers and install paths
-----BEGIN PGP SIGNATURE-----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=Q6bT
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Several build and cleanup fixes:
- removing obsolete config options
- removing dependency on internal kernel macros
- adding config options
- several build fixes related to headers and install paths"
* tag 'linux-kselftest-next-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (22 commits)
selftests: Fix build when $(O) points to a relative path
selftests: netfilter: fix a build error on openSUSE
selftests: kvm: add generated file to the .gitignore
selftests/exec: add generated files to .gitignore
selftests: add kselftest_install to .gitignore
selftests/rtc: continuously read RTC in a loop for 30s
selftests/lkdtm: Add UBSAN config
selftests/lkdtm: Remove dead config option
selftests/exec: Rename file binfmt_script to binfmt_script.py
selftests: Use -isystem instead of -I to include headers
selftests: vm: remove dependecy from internal kernel macros
selftests: vm: Add the uapi headers include variable
selftests: mptcp: Add the uapi headers include variable
selftests: net: Add the uapi headers include variable
selftests: landlock: Add the uapi headers include variable
selftests: kvm: Add the uapi headers include variable
selftests: futex: Add the uapi headers include variable
selftests: Correct the headers install path
selftests: Add and export a kernel uapi headers path
selftests: set the BUILD variable to absolute path
...
- New user_events interface. User space can register an event with the kernel
describing the format of the event. Then it will receive a byte in a page
mapping that it can check against. A privileged task can then enable that
event like any other event, which will change the mapped byte to true,
telling the user space application to start writing the event to the
tracing buffer.
- Add new "ftrace_boot_snapshot" kernel command line parameter. When set,
the tracing buffer will be saved in the snapshot buffer at boot up when
the kernel hands things over to user space. This will keep the traces that
happened at boot up available even if user space boot up has tracing as
well.
- Have TRACE_EVENT_ENUM() also update trace event field type descriptions.
Thus if a static array defines its size with an enum, the user space trace
event parsers can still know how to parse that array.
- Add new TRACE_CUSTOM_EVENT() macro. This acts the same as the
TRACE_EVENT() macro, but will attach to an existing tracepoint. This will
make one tracepoint be able to trace different content and not be stuck at
only what the original TRACE_EVENT() macro exports.
- Fixes to tracing error logging.
- Better saving of cmdlines to PIDs when tracing (use the wakeup events for
mapping).
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYjiO3RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhQzAQDtek5p80p/zkMGymm14wSH6qq0NdgN
Kv7fTBwEewUa0gD/UCOVLw4Oj+JtHQhCa3sCGZopmRv0BT1+4UQANqosKQY=
=Au08
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- New user_events interface. User space can register an event with the
kernel describing the format of the event. Then it will receive a
byte in a page mapping that it can check against. A privileged task
can then enable that event like any other event, which will change
the mapped byte to true, telling the user space application to start
writing the event to the tracing buffer.
- Add new "ftrace_boot_snapshot" kernel command line parameter. When
set, the tracing buffer will be saved in the snapshot buffer at boot
up when the kernel hands things over to user space. This will keep
the traces that happened at boot up available even if user space boot
up has tracing as well.
- Have TRACE_EVENT_ENUM() also update trace event field type
descriptions. Thus if a static array defines its size with an enum,
the user space trace event parsers can still know how to parse that
array.
- Add new TRACE_CUSTOM_EVENT() macro. This acts the same as the
TRACE_EVENT() macro, but will attach to an existing tracepoint. This
will make one tracepoint be able to trace different content and not
be stuck at only what the original TRACE_EVENT() macro exports.
- Fixes to tracing error logging.
- Better saving of cmdlines to PIDs when tracing (use the wakeup events
for mapping).
* tag 'trace-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (30 commits)
tracing: Have type enum modifications copy the strings
user_events: Add trace event call as root for low permission cases
tracing/user_events: Use alloc_pages instead of kzalloc() for register pages
tracing: Add snapshot at end of kernel boot up
tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
tracing: Fix strncpy warning in trace_events_synth.c
user_events: Prevent dyn_event delete racing with ioctl add/delete
tracing: Add TRACE_CUSTOM_EVENT() macro
tracing: Move the defines to create TRACE_EVENTS into their own files
tracing: Add sample code for custom trace events
tracing: Allow custom events to be added to the tracefs directory
tracing: Fix last_cmd_set() string management in histogram code
user_events: Fix potential uninitialized pointer while parsing field
tracing: Fix allocation of last_cmd in last_cmd_set()
user_events: Add documentation file
user_events: Add sample code for typical usage
user_events: Add self-test for validator boundaries
user_events: Add self-test for perf_event integration
user_events: Add self-test for dynamic_events integration
user_events: Add self-test for ftrace integration
...
- Rewrite how munlock works to massively reduce the contention
on i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4ucgACgkQDpNsjXcp
gj69Wgf6AwqwmO5Tmy+fLScDPqWxmXJofbocae1kyoGHf7Ui91OK4U2j6IpvAr+g
P/vLIK+JAAcTQcrSCjymuEkf4HkGZOR03QQn7maPIEe4eLrZRQDEsmHC1L9gpeJp
s/GMvDWiGE0Tnxu0EOzfVi/yT+qjIl/S8VvqtCoJv1HdzxitZ7+1RDuqImaMC5MM
Qi3uHag78vLmCltLXpIOdpgZhdZexCdL2Y/1npf+b6FVkAJRRNUnA0gRbS7YpoVp
CbxEJcmAl9cpJLuj5i5kIfS9trr+/QcvbUlzRxh4ggC58iqnmF2V09l2MJ7YU3XL
v1O/Elq4lRhXninZFQEm9zjrri7LDQ==
=n9Ad
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
This commit adds a selftest for DAMON sysfs interface. It tests the
functionality of 'nr' files and existence of files in each directory of
the hierarchy.
Link: https://lkml.kernel.org/r/20220228081314.5770-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix following coccicheck warning:
tools/testing/selftests/vm/userfaultfd.c:556:23-24:
WARNING this kind of initialization is deprecated
`unsigned long page_nr = *(&page_nr)` has the same form of
uninitialized_var() macro. I remove the redundant assignement. It has
been tested with gcc (Debian 8.3.0-6) 8.3.0.
The patch which removed uninitialized_var() is:
https://lore.kernel.org/all/20121028102007.GA7547@gmail.com/ And there is
very few "/* GCC */" comments in the Linux kernel code now.
Link: https://lkml.kernel.org/r/20220304082333.9252-1-guozhengkui@vivo.com
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since the head vmemmap page frame associated with each HugeTLB page is
reused, we should hide the PG_head flag of tail struct page from the
user. Add a tese case to check whether it is work properly. The test
steps are as follows.
1) alloc 2MB hugeTLB
2) get each page frame
3) apply those APIs in each page frame
4) Those APIs work completely the same as before.
Reading the flags of a page by /proc/kpageflags is done in
stable_page_flags(), which has invoked PageHead(), PageTail(),
PageCompound() and compound_head().
If those APIs work properly, the head page must have 15 and 17 bits set.
And tail pages must have 16 and 17 bits set but 15 bit unset. Those
flags are checked in check_page_flags().
Link: https://lkml.kernel.org/r/20211101031651.75851-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Cc: Bodeddula Balasubramaniam <bodeddub@amazon.com>
Cc: Chen Huang <chenhuang5@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The $(CC) variable used in Makefiles could contain several arguments
such as "ccache gcc". These need to be passed as a single string to
check_cc.sh, otherwise only the first argument will be used as the
compiler command. Without quotes, the $(CC) variable is passed as
distinct arguments which causes the script to fail to build trivial
programs.
Fix this by adding quotes around $(CC) when calling check_cc.sh to pass
the whole string as a single argument to the script even if it has
several words such as "ccache gcc".
Link: https://lkml.kernel.org/r/d0d460d7be0107a69e3c52477761a6fe694c1840.1646991629.git.guillaume.tucker@collabora.com
Fixes: e9886ace22 ("selftests, x86: Rework x86 target architecture detection")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Tested-by: "kernelci.org bot" <bot@kernelci.org>
Reviewed-by: Guenter Roeck <groeck@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Test the enforcement of memory.high limit for large amount of memory
allocation within a single kernel entry. There are valid use-cases
where the application can trigger large amount of memory allocation
within a single syscall e.g. mlock() or mmap(MAP_POPULATE).
Make sure memory.high limit enforcement works for such use-cases.
Link: https://lkml.kernel.org/r/20220211064917.2028469-4-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for RISC-V in the rseq selftests, which covers both
64-bit and 32-bit ISA with little endian mode.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Tested-by: Eric Lin <eric.lin@sifive.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler build,
from the fast-headers tree - including placeholder *_api.h headers for
later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Z8uT
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler
build, from the fast-headers tree - including placeholder *_api.h
headers for later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per
node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
* tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
sched/headers: ARM needs asm/paravirt_api_clock.h too
sched/numa: Fix boot crash on arm64 systems
headers/prep: Fix header to build standalone: <linux/psi.h>
sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y
cgroup: Fix suspicious rcu_dereference_check() usage warning
sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains
sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity()
sched/deadline,rt: Remove unused functions for !CONFIG_SMP
sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently
sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy()
sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file
sched/deadline: Remove unused def_dl_bandwidth
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
sched/tracing: Don't re-read p->state when emitting sched_switch event
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
sched/cpuacct: Remove redundant RCU read lock
sched/cpuacct: Optimize away RCU read lock
sched/cpuacct: Fix charge percpu cpuusage
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2022-03-21 v2
We've added 137 non-merge commits during the last 17 day(s) which contain
a total of 143 files changed, 7123 insertions(+), 1092 deletions(-).
The main changes are:
1) Custom SEC() handling in libbpf, from Andrii.
2) subskeleton support, from Delyan.
3) Use btf_tag to recognize __percpu pointers in the verifier, from Hao.
4) Fix net.core.bpf_jit_harden race, from Hou.
5) Fix bpf_sk_lookup remote_port on big-endian, from Jakub.
6) Introduce fprobe (multi kprobe) _without_ arch bits, from Masami.
The arch specific bits will come later.
7) Introduce multi_kprobe bpf programs on top of fprobe, from Jiri.
8) Enable non-atomic allocations in local storage, from Joanne.
9) Various var_off ptr_to_btf_id fixed, from Kumar.
10) bpf_ima_file_hash helper, from Roberto.
11) Add "live packet" mode for XDP in BPF_PROG_RUN, from Toke.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (137 commits)
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
bpftool: Fix a bug in subskeleton code generation
bpf: Fix bpf_prog_pack when PMU_SIZE is not defined
bpf: Fix bpf_prog_pack for multi-node setup
bpf: Fix warning for cast from restricted gfp_t in verifier
bpf, arm: Fix various typos in comments
libbpf: Close fd in bpf_object__reuse_map
bpftool: Fix print error when show bpf map
bpf: Fix kprobe_multi return probe backtrace
Revert "bpf: Add support to inline bpf_get_func_ip helper on x86"
bpf: Simplify check in btf_parse_hdr()
selftests/bpf/test_lirc_mode2.sh: Exit with proper code
bpf: Check for NULL return from bpf_get_btf_vmlinux
selftests/bpf: Test skipping stacktrace
bpf: Adjust BPF stack helper functions to accommodate skip > 0
bpf: Select proper size for bpf_prog_pack
...
====================
Link: https://lore.kernel.org/r/20220322050159.5507-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When compiler emits endbr insn the function address could
be different than what bpf_get_func_ip() reports.
This is a short term workaround.
bpf_get_func_ip() will be fixed later.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test creates a separate VRF for the VLAN upper, but does not destroy
it during cleanup, resulting in "RTNETLINK answers: File exists" errors.
Fix by using the same VRF for the port and its VLAN upper. This is OK
since their IP addresses do not overlap.
Before:
# ./bridge_locked_port.sh
TEST: Locked port ipv4 [ OK ]
TEST: Locked port ipv6 [ OK ]
TEST: Locked port vlan [ OK ]
# ./bridge_locked_port.sh
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
TEST: Locked port ipv4 [ OK ]
TEST: Locked port ipv6 [ OK ]
TEST: Locked port vlan [ OK ]
After:
# ./bridge_locked_port.sh
TEST: Locked port ipv4 [ OK ]
TEST: Locked port ipv6 [ OK ]
TEST: Locked port vlan [ OK ]
# ./bridge_locked_port.sh
TEST: Locked port ipv4 [ OK ]
TEST: Locked port ipv6 [ OK ]
TEST: Locked port vlan [ OK ]
Fixes: b2b681a412 ("selftests: forwarding: tests of locked port feature")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Disable learning before bringing the bridge port up in order to avoid
the FDB being populated and the test failing.
Before:
# ./bridge_locked_port.sh
RTNETLINK answers: File exists
TEST: Locked port ipv4 [FAIL]
Ping worked after locking port, but before adding FDB entry
TEST: Locked port ipv6 [ OK ]
TEST: Locked port vlan [ OK ]
After:
# ./bridge_locked_port.sh
TEST: Locked port ipv4 [ OK ]
TEST: Locked port ipv6 [ OK ]
TEST: Locked port vlan [ OK ]
Fixes: b2b681a412 ("selftests: forwarding: tests of locked port feature")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- Handle unusual AT_PHDR offsets (Akira Kawata)
- Fix initial mapping size when PT_LOADs are not ordered (Alexey Dobriyan)
- Move more code under CONFIG_COREDUMP (Alexey Dobriyan)
- Fix missing mmap_lock in file_files_note (Eric W. Biederman)
- Remove a.out support for alpha and m68k (Eric W. Biederman)
- Include first pages of non-exec ELF libraries in coredump (Jann Horn)
- Don't write past end of notes for regset gap in coredump (Rick Edgecombe)
- Comment clean-ups (Tom Rix)
- Force single empty string when argv is empty (Kees Cook)
- Add NULL argv selftest (Kees Cook)
- Properly redefine PT_GNU_* in terms of PT_LOOS (Kees Cook)
- MAINTAINERS: Update execve entry with tree (Kees Cook)
- Introduce initial KUnit testing for binfmt_elf (Kees Cook)
-----BEGIN PGP SIGNATURE-----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=SyEY
-----END PGP SIGNATURE-----
Merge tag 'execve-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
"Execve and binfmt updates.
Eric and I have stepped up to be the active maintainers of this area,
so here's our first collection. The bulk of the work was in coredump
handling fixes; additional details are noted below:
- Handle unusual AT_PHDR offsets (Akira Kawata)
- Fix initial mapping size when PT_LOADs are not ordered (Alexey
Dobriyan)
- Move more code under CONFIG_COREDUMP (Alexey Dobriyan)
- Fix missing mmap_lock in file_files_note (Eric W. Biederman)
- Remove a.out support for alpha and m68k (Eric W. Biederman)
- Include first pages of non-exec ELF libraries in coredump (Jann
Horn)
- Don't write past end of notes for regset gap in coredump (Rick
Edgecombe)
- Comment clean-ups (Tom Rix)
- Force single empty string when argv is empty (Kees Cook)
- Add NULL argv selftest (Kees Cook)
- Properly redefine PT_GNU_* in terms of PT_LOOS (Kees Cook)
- MAINTAINERS: Update execve entry with tree (Kees Cook)
- Introduce initial KUnit testing for binfmt_elf (Kees Cook)"
* tag 'execve-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf: Don't write past end of notes for regset gap
a.out: Stop building a.out/osf1 support on alpha and m68k
coredump: Don't compile flat_core_dump when coredumps are disabled
coredump: Use the vma snapshot in fill_files_note
coredump/elf: Pass coredump_params into fill_note_info
coredump: Remove the WARN_ON in dump_vma_snapshot
coredump: Snapshot the vmas in do_coredump
coredump: Move definition of struct coredump_params into coredump.h
binfmt_elf: Introduce KUnit test
ELF: Properly redefine PT_GNU_* in terms of PT_LOOS
MAINTAINERS: Update execve entry with more details
exec: cleanup comments
fs/binfmt_elf: Refactor load_elf_binary function
fs/binfmt_elf: Fix AT_PHDR for unusual ELF files
binfmt: move more stuff undef CONFIG_COREDUMP
selftests/exec: Test for empty string on NULL argv
exec: Force single empty string when argv is empty
coredump: Also dump first pages of non-executable ELF libraries
ELF: fix overflow in total mapping size calculation
`cur64`, `start64` and `ts_delta` are int64_t. Change format
specifiers in fprintf from `"%lu"` to `"%" PRId64` to adapt
to 32-bit and 64-bit systems.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220319073730.5235-1-guozhengkui@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This pull request contains the following branches:
exp.2022.02.24a: Contains a fix for idle detection from Neeraj Upadhyay
and missing access marking detected by KCSAN.
fixes.2022.02.14a: Miscellaneous fixes.
rcu_barrier.2022.02.08a: Reduces coupling between rcu_barrier() and
CPU-hotplug operations, so that rcu_barrier() no longer needs
to do cpus_read_lock(). This may also someday allow system
boot to bring CPUs online concurrently.
rcu-tasks.2022.02.08a: Enable more aggressive movement to per-CPU
queueing when reacting to excessive lock contention due
to workloads placing heavy update-side stress on RCU tasks.
rt.2022.02.01b: Improvements to RCU priority boosting, including
changes from Neeraj Upadhyay, Zqiang, and Alison Chaiken.
torture.2022.02.01b: Various fixes improving test robustness and
debug information.
torturescript.2022.02.08a: Add tests for SRCU size transitions, further
compress torture.sh build products, and improve debug output.
-----BEGIN PGP SIGNATURE-----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=ljVY
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.03.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Fix idle detection (Neeraj Upadhyay) and missing access marking
detected by KCSAN.
- Reduce coupling between rcu_barrier() and CPU-hotplug operations, so
that rcu_barrier() no longer needs to do cpus_read_lock(). This may
also someday allow system boot to bring CPUs online concurrently.
- Enable more aggressive movement to per-CPU queueing when reacting to
excessive lock contention due to workloads placing heavy update-side
stress on RCU tasks.
- Improvements to RCU priority boosting, including changes from Neeraj
Upadhyay, Zqiang, and Alison Chaiken.
- Various fixes improving test robustness and debug information.
- Add tests for SRCU size transitions, further compress torture.sh
build products, and improve debug output.
- Miscellaneous fixes.
* tag 'rcu.2022.03.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits)
rcu: Replace cpumask_weight with cpumask_empty where appropriate
rcu: Remove __read_mostly annotations from rcu_scheduler_active externs
rcu: Uninline multi-use function: finish_rcuwait()
rcu: Mark writes to the rcu_segcblist structure's ->flags field
kasan: Record work creation stack trace with interrupts enabled
rcu: Inline __call_rcu() into call_rcu()
rcu: Add mutex for rcu boost kthread spawning and affinity setting
rcu: Fix description of kvfree_rcu()
MAINTAINERS: Add Frederic and Neeraj to their RCU files
rcutorture: Provide non-power-of-two Tasks RCU scenarios
rcutorture: Test SRCU size transitions
torture: Make torture.sh help message match reality
rcu-tasks: Set ->percpu_enqueue_shift to zero upon contention
rcu-tasks: Use order_base_2() instead of ilog2()
rcu: Create and use an rcu_rdp_cpu_online()
rcu: Make rcu_barrier() no longer block CPU-hotplug operations
rcu: Rework rcu_barrier() and callback-migration logic
rcu: Refactor rcu_barrier() empty-list handling
rcu: Kill rnp->ofl_seq and use only rcu_state.ofl_lock for exclusion
torture: Change KVM environment variable to RCUTORTURE
...
-----BEGIN PGP SIGNATURE-----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=uGS4
-----END PGP SIGNATURE-----
Merge tag 'x86_sgx_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Borislav Petkov:
- A couple of fixes and improvements to the SGX selftests
* tag 'x86_sgx_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/sgx: Treat CC as one argument
selftests/x86: Add validity check and allow field splitting
selftests/sgx: Remove extra newlines in test output
selftests/sgx: Ensure enclave data available during debug print
selftests/sgx: Do not attempt enclave build without valid enclave
selftests/sgx: Fix NULL-pointer-dereference upon early test failure
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmIvta8QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNAIhB/oDSva5FryAFExVuIB+mqRkbZO9kj6fy/5J
ctN9LEVO2GI/U1TVAUWop1lXmP8Kbq5UCZOAuY8sz7dAZs7NRUWkwTrXVhaTpi6L
oxCfu5Afu76d/TGgivNz+G7/ewIJRFj5zCPmHezLF9iiWPUkcAsP0XCp4a0iOjU4
04O4d7TL/ap9ujEes+U0oEXHnyDTPrVB2OVE316FKD1fgztcjVJ2U+TxX5O4xitT
PPIfeQCjQBq1B2OC1cptE3wpP+YEr9OZJbx+Ieweidy1CSInEy0nZ13tLoUnGPGU
KPhsvO9daUCbhbd5IDRBuXmTi/sHU4NIB8LNEVzT1mUPnU8pCizv
=ziGg
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
docs: sysfs-devices-system-cpu: document "asymm" value for mte_tcf_preferred
arm64/mte: Remove asymmetric mode from the prctl() interface
arm64: Add cavium_erratum_23154_cpus missing sentinel
perf/marvell: Fix !CONFIG_OF build for CN10K DDR PMU driver
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
Documentation: vmcoreinfo: Fix htmldocs warning
kasan: fix a missing header include of static_keys.h
drivers/perf: Add Apple icestorm/firestorm CPU PMU driver
drivers/perf: arm_pmu: Handle 47 bit counters
arm64: perf: Consistently make all event numbers as 16-bits
arm64: perf: Expose some Armv9 common events under sysfs
perf/marvell: cn10k DDR perf event core ownership
perf/marvell: cn10k DDR perfmon event overflow handling
perf/marvell: CN10k DDR performance monitor support
dt-bindings: perf: marvell: cn10k ddr performance monitor
arm64: clean up tools Makefile
perf/arm-cmn: Update watchpoint format
perf/arm-cmn: Hide XP PUB events for CMN-600
arm64: drop unused includes of <linux/personality.h>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
...
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCYi62bxIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9KcoQD/dmnK80r9aYRpjP0r9lRViKBbpPxJVHR1
XNDmRVET7DkBANz1Y00wayKWskefS1rGHXDp40BNBiideWz1GFrWg/ED
=u9w6
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"In order to split the work a bit we've aligned with David Howells more
or less that I take more hardware/firmware aligned keyring patches,
and he takes care more of the framework aligned patches.
For TPM the patches worth of highlighting are the fixes for
refcounting provided by Lino Sanfilippo and James Bottomley.
Eric B. has done a bunch obvious (but important) fixes but there's one
a bit controversial: removal of asym_tpm. It was added in 2018 when
TPM1 was already declared as insecure and world had moved on to TPM2.
I don't know how this has passed all the filters but I did not have a
chance to see the patches when they were out. I simply cannot commit
to maintaining this because it was from all angles just wrong to take
it in the first place to the mainline kernel. Nobody should use this
module really for anything.
Finally, there is a new keyring '.machine' to hold MOK keys ('Machine
Owner Keys'). In the mok side MokListTrustedRT UEFI variable can be
set, from which kernel knows that MOK keys are kernel trusted keys and
they are populated to the machine keyring. This keyring linked to the
secondary trusted keyring, which means that can be used like any
kernel trusted keys. This keyring of course can be used to hold other
MOK'ish keys in other platforms in future"
* tag 'tpmdd-next-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: (24 commits)
tpm: use try_get_ops() in tpm-space.c
KEYS: asymmetric: properly validate hash_algo and encoding
KEYS: asymmetric: enforce that sig algo matches key algo
KEYS: remove support for asym_tpm keys
tpm: fix reference counting for struct tpm_chip
integrity: Only use machine keyring when uefi_check_trust_mok_keys is true
integrity: Trust MOK keys if MokListTrustedRT found
efi/mokvar: move up init order
KEYS: Introduce link restriction for machine keys
KEYS: store reference to machine keyring
integrity: add new keyring handler for mok keys
integrity: Introduce a Linux keyring called machine
integrity: Fix warning about missing prototypes
KEYS: trusted: Avoid calling null function trusted_key_exit
KEYS: trusted: Fix trusted key backends when building as module
tpm: xen-tpmfront: Use struct_size() helper
KEYS: x509: remove dead code that set ->unsupported_sig
KEYS: x509: remove never-set ->unsupported_key flag
KEYS: x509: remove unused fields
KEYS: x509: clearly distinguish between key and signature algorithms
...
When test_lirc_mode2_user exec failed, the test report failed but still
exit with 0. Fix it by exiting with an error code.
Another issue is for the LIRCDEV checking. With bash -n, we need to quote
the variable, or it will always be true. So if test_lirc_mode2_user was
not run, just exit with skip code.
Fixes: 6bdd533cee ("bpf: add selftest for lirc_mode2 type program")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220321024149.157861-1-liuhangbin@gmail.com
Add a test case for stacktrace with skip > 0 using a small sized
buffer. It didn't support skipping entries greater than or equal to
the size of buffer and filled the skipped part with 0.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220314182042.71025-2-namhyung@kernel.org
The context access converter rewrites the 4-byte load from
bpf_sk_lookup->remote_port to a 2-byte load from bpf_sk_lookup_kern
structure.
It means that we cannot treat the destination register contents as a 32-bit
value, or the code will not be portable across big- and little-endian
architectures.
This is exactly the same case as with 4-byte loads from bpf_sock->dst_port
so follow the approach outlined in [1] and treat the register contents as a
16-bit value in the test.
[1]: https://lore.kernel.org/bpf/20220317113920.1068535-5-jakub@cloudflare.com/
Fixes: 2ed0dc5937 ("selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220319183356.233666-4-jakub@cloudflare.com
In commit 9a69e2b385 ("bpf: Make remote_port field in struct
bpf_sk_lookup 16-bit wide") ->remote_port field changed from __u32 to
__be16.
However, narrow load tests which exercise 1-byte sized loads from
offsetof(struct bpf_sk_lookup, remote_port) were not adopted to reflect the
change.
As a result, on little-endian we continue testing loads from addresses:
- (__u8 *)&ctx->remote_port + 3
- (__u8 *)&ctx->remote_port + 4
which map to the zero padding following the remote_port field, and don't
break the tests because there is no observable change.
While on big-endian, we observe breakage because tests expect to see zeros
for values loaded from:
- (__u8 *)&ctx->remote_port - 1
- (__u8 *)&ctx->remote_port - 2
Above addresses map to ->remote_ip6 field, which precedes ->remote_port,
and are populated during the bpf_sk_lookup IPv6 tests.
Unsurprisingly, on s390x we observe:
#136/38 sk_lookup/narrow access to ctx v4:OK
#136/39 sk_lookup/narrow access to ctx v6:FAIL
Fix it by removing the checks for 1-byte loads from offsets outside of the
->remote_port field.
Fixes: 9a69e2b385 ("bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide")
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220319183356.233666-3-jakub@cloudflare.com
This patch adds a few calls to the existing local storage selftest to
test that we can associate multiple elements with the local storage.
The sleepable program's call to bpf_sk_storage_get with sk_storage_map2
will lead to an allocation of a new selem under the GFP_KERNEL flag.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220318045553.3091807-3-joannekoong@fb.com
Add two tests to pmtu.sh, for verifying that PMTU exceptions get
properly created for routes that don't belong to the main table.
A fib-rule based on the packet's DSCP field is used to jump to the
correct table. ECN shouldn't interfere with this process, so each test
has two components: one that only sets DSCP and one that sets both DSCP
and ECN.
One of the test triggers PMTU exceptions using ICMP Echo Requests, the
other using UDP packets (to test different handlers in the kernel).
A few adjustments are necessary in the rest of the script to allow
policy routing scenarios:
* Add global variable rt_table that allows setup_routing_*() to
add routes to a specific routing table. By default rt_table is set
to "main", so existing tests don't need to be modified.
* Another global variable, policy_mark, is used to define which
dsfield value is used for policy routing. This variable has no
effect on tests that don't use policy routing.
* The UDP version of the test uses socat. So cleanup() now also need
to kill socat PIDs.
* route_get_dst_pmtu_from_exception() and route_get_dst_exception()
now take an optional third argument specifying the dsfield. If
not specified, 0 is used, so existing users don't need to be
modified.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmI0lrQPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpDy0YQAIX2bWcPFMqHqn3CAYhTSTiOK5s+OWx9im5f
5yTPRj+SJ88SWv030r8a5dxWh2dEK2IetM9KifZ0dvmcCs8lYW/9/IUkHYY9lAYJ
9VLH4iPgs9dOD9wtfovfb+vcM8bso9Ndi3aCFJUj+bcNwYU3kBIJ+8AxA5DZoLty
5LPF38eoxrSEv9N0VwqvhGxdgqDp8Zahykr693r+8Wd3Rj6yRoqoEvqWhHdVWlWJ
3quRNkYN4LzjN3x1T9CLaZUqMofbUjfYCAvbZorALJy6In1FfgoyocFe6/JvsmzZ
xOlrWWbJz/1NNI6Hoy5aZtQavTFrHu4XbCkjBDL7RhRxj636KWelVoXAbV05XX2r
hQYMnN0bwlnAljTefguIZ7frnQyjg5OV8GMu3CTIPMqu//fA+61z+bXoyVy6pzaV
gcXHtDgIdiRaT6BJiHST8ctxZWDTr2GUgTGfdlCde7hgmJ7DjManLXvgYx101/Nz
VfvKzz3oSvVTelNa/6ZWxuUlwvly0eKONSkwjp0uq5TZ9G8NLaKitA8nKDSkoegx
41iIUEztivuu9KQvQkl8wdcCPwEk8K2sOTH7ikINS/wJ0khiUztndxCAlEPbQo50
567OiSaj5+vqFPZsxWBVTIbmkdBVKCzrG+4B1H4didMb1Q1n2lHhgj1keHTmZyVP
jlFofZxf
=J1mn
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.18
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
Add test where sender sends two message, each with own
data pattern. Reader tries to read first to broken buffer:
it has three pages size, but middle page is unmapped. Then,
reader tries to read second message to valid buffer. Test
checks, that uncopied part of first message was dropped
and thus not copied as part of second message.
Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test for receive timeout check: connection is established,
receiver sets timeout, but sender does nothing. Receiver's
'read()' call must return EAGAIN.
Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace magic numbers in BPF code with constants from bpf.h, so that they
don't require an explanation in the comments.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-4-jakub@cloudflare.com
cgroup_skb/egress programs which sock_fields test installs process packets
flying in both directions, from the client to the server, and in reverse
direction.
Recently added dst_port check relies on the fact that destination
port (remote peer port) of the socket which sends the packet is known ahead
of time. This holds true only for the client socket, which connects to the
known server port.
Filter out any traffic that is not egressing from the client socket in the
BPF program that tests reading the dst_port.
Fixes: 8f50f16ff3 ("selftests/bpf: Extend verifier and bpf_sock tests for dst_port loads")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-3-jakub@cloudflare.com
The helper macro that records an error in BPF programs that exercise sock
fields access has been inadvertently broken by adaptation work that
happened in commit b18c1f0aa4 ("bpf: selftest: Adapt sock_fields test to
use skel and global variables").
BPF_NOEXIST flag cannot be used to update BPF_MAP_TYPE_ARRAY. The operation
always fails with -EEXIST, which in turn means the error never gets
recorded, and the checks for errors always pass.
Revert the change in update flags.
Fixes: b18c1f0aa4 ("bpf: selftest: Adapt sock_fields test to use skel and global variables")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-2-jakub@cloudflare.com
The commit 314001f0bf ("af_unix: Add OOB support") introduced OOB for
AF_UNIX, but it lacks some changes for POLLPRI. Let's add the missing
piece.
In the selftest, normal datagrams are sent followed by OOB data, so this
commit replaces `POLLIN | POLLPRI` with just `POLLPRI` in the first test
case.
Fixes: 314001f0bf ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changes the selftests/bpf Makefile to also generate
a subskel.h for every skel.h it would have normally generated.
Separately, it also introduces a new subskeleton test which tests
library objects, externs, weak symbols, kconfigs, and user maps.
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1bd24956940bbbfe169bb34f7f87b11df52ef011.1647473511.git.delyank@fb.com
Adding tests for bpf_program__attach_kprobe_multi_opts function,
that test attach with pattern, symbols and addrs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-13-jolsa@kernel.org
Adding kprobe_multi attach test that uses new fprobe interface to
attach kprobe program to multiple functions.
The test is attaching programs to bpf_fentry_test* functions and
uses single trampoline program bpf_prog_test_run to trigger
bpf_fentry_test* functions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-11-jolsa@kernel.org
In namespace at_ns0, the IP address of tnl dev is 10.1.1.100 which is the
overlay IP, and the ip address of veth0 is 172.16.1.100 which is the vtep
IP. When doing 'ping 10.1.1.100' from root namespace, the remote_ip should
be 172.16.1.100.
Fixes: 933a741e3b ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Kaixi Fan <fankaixi.li@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220313164116.5889-1-fankaixi.li@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
and wireless.
Current release - regressions:
- Revert "netfilter: nat: force port remap to prevent shadowing
well-known ports", restore working conntrack on asymmetric paths
- Revert "ath10k: drop beacon and probe response which leak from
other channel", restore working AP and mesh mode on QCA9984
- eth: intel: fix hang during reboot/shutdown
Current release - new code bugs:
- netfilter: nf_tables: disable register tracking, it needs more
work to cover all corner cases
Previous releases - regressions:
- ipv6: fix skb_over_panic in __ip6_append_data when (admin-only)
extension headers get specified
- esp6: fix ESP over TCP/UDP, interpret ipv6_skip_exthdr's return
value more selectively
- bnx2x: fix driver load failure when FW not present in initrd
Previous releases - always broken:
- vsock: stop destroying unrelated sockets in nested virtualization
- packet: fix slab-out-of-bounds access in packet_recvmsg()
Misc:
- add Paolo Abeni to networking maintainers!
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pStH
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, ipsec, and wireless.
A few last minute revert / disable and fix patches came down from our
sub-trees. We're not waiting for any fixes at this point.
Current release - regressions:
- Revert "netfilter: nat: force port remap to prevent shadowing
well-known ports", restore working conntrack on asymmetric paths
- Revert "ath10k: drop beacon and probe response which leak from
other channel", restore working AP and mesh mode on QCA9984
- eth: intel: fix hang during reboot/shutdown
Current release - new code bugs:
- netfilter: nf_tables: disable register tracking, it needs more work
to cover all corner cases
Previous releases - regressions:
- ipv6: fix skb_over_panic in __ip6_append_data when (admin-only)
extension headers get specified
- esp6: fix ESP over TCP/UDP, interpret ipv6_skip_exthdr's return
value more selectively
- bnx2x: fix driver load failure when FW not present in initrd
Previous releases - always broken:
- vsock: stop destroying unrelated sockets in nested virtualization
- packet: fix slab-out-of-bounds access in packet_recvmsg()
Misc:
- add Paolo Abeni to networking maintainers!"
* tag 'net-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (26 commits)
iavf: Fix hang during reboot/shutdown
net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload
net: bcmgenet: skip invalid partial checksums
bnx2x: fix built-in kernel driver load failure
net: phy: mscc: Add MODULE_FIRMWARE macros
net: dsa: Add missing of_node_put() in dsa_port_parse_of
net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()
Revert "ath10k: drop beacon and probe response which leak from other channel"
hv_netvsc: Add check for kvmalloc_array
iavf: Fix double free in iavf_reset_task
ice: destroy flow director filter mutex after releasing VSIs
ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats()
Add Paolo Abeni to networking maintainers
atm: eni: Add check for dma_map_single
net/packet: fix slab-out-of-bounds access in packet_recvmsg()
net: mdio: mscc-miim: fix duplicate debugfs entry
net: phy: marvell: Fix invalid comparison in the resume and suspend functions
esp6: fix check on ipv6_skip_exthdr's return value
net: dsa: microchip: add spi_device_id tables
netfilter: nf_tables: disable register tracking
...
When building the vm selftests using clang, some errors are seen due to
having headers in the compilation command:
clang -Wall -I ../../../../usr/include -no-pie gup_test.c ../../../../mm/gup_test.h -lrt -lpthread -o .../tools/testing/selftests/vm/gup_test
clang: error: cannot specify -o when generating multiple output files
make[1]: *** [../lib.mk:146: .../tools/testing/selftests/vm/gup_test] Error 1
Rework to add the header files to LOCAL_HDRS before including ../lib.mk,
since the dependency is evaluated in '$(OUTPUT)/%:%.c $(LOCAL_HDRS)' in
file lib.mk.
Link: https://lkml.kernel.org/r/20220304000645.1888133-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix array_size.cocci warning in tools/testing/selftests/net.
Use `ARRAY_SIZE(arr)` instead of forms like `sizeof(arr)/sizeof(arr[0])`.
It has been tested with gcc (Debian 8.3.0-6) 8.3.0.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220316092858.9398-1-guozhengkui@vivo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When bpf_jit_harden is toggled between 0 and 2, subprog jit may fail
due to inconsistent twice read values of bpf_jit_harden during jit. So
add a test to ensure the problem is fixed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220309123321.2400262-5-houtao1@huawei.com
This patch removes the libcap usage from test_progs.
bind_perm.c is the only user. cap_*_effective() helpers added in the
earlier patch are directly used instead.
No other selftest binary is using libcap, so '-lcap' is also removed
from the Makefile.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220316173835.2039334-1-kafai@fb.com
This patch removes the libcap usage from test_verifier.
The cap_*_effective() helpers added in the earlier patch are
used instead.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220316173829.2038682-1-kafai@fb.com
After upgrading to the newer libcap (>= 2.60),
the libcap commit aca076443591 ("Make cap_t operations thread safe.")
added a "__u8 mutex;" to the "struct _cap_struct". It caused a few byte
shift that breaks the assumption made in the "struct libcap" definition
in test_verifier.c.
The bpf selftest usage only needs to enable and disable the effective
caps of the running task. It is easier to directly syscall the
capget and capset instead. It can also remove the libcap
library dependency.
The cap_helpers.{c,h} is added. One __u64 is used for all CAP_*
bits instead of two __u32.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220316173823.2036955-1-kafai@fb.com
The fundamental premise of VRF and l3mdev core code is binding a socket
to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope.
Legacy code resets flowi_oif to the l3mdev losing any original port
device binding. Ben (among others) has demonstrated use cases where the
original port device binding is important and needs to be retained.
This patch handles that by adding a new entry to the common flow struct
that can indicate the l3mdev index for later rule and table matching
avoiding the need to reset flowi_oif.
In addition to allowing more use cases that require port device binds,
this patch brings a few datapath simplications:
1. l3mdev_fib_rule_match is only called when walking fib rules and
always after l3mdev_update_flow. That allows an optimization to bail
early for non-VRF type uses cases when flowi_l3mdev is not set. Also,
only that index needs to be checked for the FIB table id.
2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev
(e.g., VRF) device. By resetting flowi_oif only for this case the
FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed,
removing several checks in the datapath. The flowi_iif path can be
simplified to only be called if the it is not loopback (loopback can
not be assigned to an L3 domain) and the l3mdev index is not already
set.
3. Avoid another device lookup in the output path when the fib lookup
returns a reject failure.
Note: 2 functional tests for local traffic with reject fib rules are
updated to reflect the new direct failure at FIB lookup time for ping
rather than the failure on packet path. The current code fails like this:
HINT: Fails since address on vrf device is out of device scope
COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
ping: Warning: source address might be selected on device other than: eth1
PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data.
--- 172.16.3.1 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
where the test now directly fails:
HINT: Fails since address on vrf device is out of device scope
COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
ping: connect: No route to host
Signed-off-by: David Ahern <dsahern@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clean up the array_size.cocci warnings under tools/testing/selftests/bpf/:
Use `ARRAY_SIZE(arr)` instead of forms like `sizeof(arr)/sizeof(arr[0])`.
tools/testing/selftests/bpf/test_cgroup_storage.c uses ARRAY_SIZE() defined
in tools/include/linux/kernel.h (sys/sysinfo.h -> linux/kernel.h), while
others use ARRAY_SIZE() in bpf_util.h.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220315130143.2403-1-guozhengkui@vivo.com
Add a test that verifies that UAPI notifications are emitted, as mlxsw
installs and deinstalls HW counters for the L3 offload xstats.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test that verifies basic UAPI contracts, netdevsim operation,
rollbacks after partial enablement in core, and UAPI notifications.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net coming late
in the 5.17-rc process:
1) Revert port remap to mitigate shadowing service ports, this is causing
problems in existing setups and this mitigation can be achieved with
explicit ruleset, eg.
... tcp sport < 16386 tcp dport >= 32768 masquerade random
This patches provided a built-in policy similar to the one described above.
2) Disable register tracking infrastructure in nf_tables. Florian reported
two issues:
- Existing expressions with no implemented .reduce interface
that causes data-store on register should cancel the tracking.
- Register clobbering might be possible storing data on registers that
are larger than 32-bits.
This might lead to generating incorrect ruleset bytecode. These two
issues are scheduled to be addressed in the next release cycle.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: disable register tracking
Revert "netfilter: conntrack: tag conntracks picked up in local out hook"
Revert "netfilter: nat: force port remap to prevent shadowing well-known ports"
====================
Link: https://lore.kernel.org/r/20220312220315.64531-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that errors occur if key protection disallows access, including
tests for storage and fetch protection override. Perform tests for both
logical vcpu and absolute vm ioctls.
Also extend the existing tests to the vm ioctl.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Link: https://lore.kernel.org/r/20220308125841.3271721-6-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Do not just test the actual copy, but also that success is indicated
when using the check only flag.
Add copy test with storage key checking enabled, including tests for
storage and fetch protection override.
These test cover both logical vcpu ioctls as well as absolute vm ioctls.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Link: https://lore.kernel.org/r/20220308125841.3271721-5-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The stages synchronize guest and host execution.
This helps the reader and constraits the execution of the test -- if the
observed staging differs from the expected the test fails.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Link: https://lore.kernel.org/r/20220308125841.3271721-4-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
In order to achieve good test coverage we need to be able to invoke the
MEM_OP ioctl with all possible parametrizations.
However, for a given test, we want to be concise and not specify a long
list of default values for parameters not relevant for the test, so the
readers attention is not needlessly diverted.
Add a macro that enables this and convert the existing test to use it.
The macro emulates named arguments and hides some of the ioctl's
redundancy, e.g. sets the key flag if an access key is specified.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Link: https://lore.kernel.org/r/20220308125841.3271721-3-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Split success case/copy test from error test, making them independent.
This means they do not share state and are easier to understand.
Also, new test can be added in the same manner without affecting the old
ones. In order to make that simpler, introduce functionality for the
setup of commonly used variables.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Link: https://lore.kernel.org/r/20220308125841.3271721-2-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Some tests, such as Test d052: Add 1M filters with the same action, may
not work with a small timeout value.
Increase timeout to 24 seconds.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Block Aperture Window support was an attempt to layer an error model
over PMEM for platforms that did not support machine-check-recovery.
However, it was abandoned before it ever shipped, and only ever existed
in the ACPI specification. Meanwhile Linux has carried a large pile of
dead code for non-shipping infrastructure. For years it has been off to
the side out of the way, but now CXL and recent directions with DAX
support have the potential to collide with this code.
In preparation for adding discontiguous namespace support, a
pre-requisite for the nvdimm subsystem to replace device-mapper for
striping + concatenation use cases, delete BLK aperture support.
On the obscure chance that some hardware vendor shipped support for this
mode, note that the driver will still keep BLK space reserved in the
label area. So an end user in this case would still have the opportunity
to report the regression to get BLK-mode support restored without
risking the data they have on that device.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/164688416668.2879318.16903178375774275120.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Building selftests/bpf with latest clang compiler (clang15 built
from source), I hit the following compilation error:
/.../prog_tests/send_signal.c:43:16: error: variable 'j' set but not used [-Werror,-Wunused-but-set-variable]
volatile int j = 0;
^
1 error generated.
The problem also exists with clang13 and clang14. clang12 is okay.
In send_signal.c, we have the following code ...
volatile int j = 0;
[...]
for (int i = 0; i < 100000000 && !sigusr1_received; i++)
j /= i + 1;
... to burn CPU cycles so bpf_send_signal() helper can be tested
in NMI mode.
Slightly changing 'j /= i + 1' to 'j /= i + j + 1' or 'j++' can
fix the problem. Further investigation indicated this should be
a clang bug ([1]). The upstream fix will be proposed later. But it
is a good idea to workaround the issue to unblock people who build
kernel/selftests with clang.
[1] https://discourse.llvm.org/t/strange-clang-unused-but-set-variable-error-with-volatile-variables/60841
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220311003721.2177170-1-yhs@fb.com
This adds an extra test to the xdp_do_redirect selftest for XDP live packet
mode, which verifies that the maximum permissible packet size is accepted
without any errors, and that a too big packet is correctly rejected.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220310225621.53374-2-toke@redhat.com
Check that bpf_kernel_read_file() denies the reading of an IMA policy, by
ensuring that ima_setup.sh exits with an error.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-10-roberto.sassu@huawei.com
Test the ability of bpf_lsm_kernel_read_file() to call the sleepable
functions bpf_ima_inode_hash() or bpf_ima_file_hash() to obtain a
measurement of a loaded IMA policy.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-9-roberto.sassu@huawei.com
Verify that bpf_ima_inode_hash() returns a non-fresh digest after a file
write, and that bpf_ima_file_hash() returns a fresh digest. Verification is
done by requesting the digest from the bprm_creds_for_exec hook, called
before ima_bprm_check().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-7-roberto.sassu@huawei.com
and ipsec.
Current release - regressions:
- Bluetooth: fix unbalanced unlock in set_device_flags()
- Bluetooth: fix not processing all entries on cmd_sync_work,
make connect with qualcomm and intel adapters reliable
- Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"
- xdp: xdp_mem_allocator can be NULL in trace_mem_connect()
- eth: ice: fix race condition and deadlock during interface enslave
Current release - new code bugs:
- tipc: fix incorrect order of state message data sanity check
Previous releases - regressions:
- esp: fix possible buffer overflow in ESP transformation
- dsa: unlock the rtnl_mutex when dsa_master_setup() fails
- phy: meson-gxl: fix interrupt handling in forced mode
- smsc95xx: ignore -ENODEV errors when device is unplugged
Previous releases - always broken:
- xfrm: fix tunnel mode fragmentation behavior
- esp: fix inter address family tunneling on GSO
- tipc: fix null-deref due to race when enabling bearer
- sctp: fix kernel-infoleak for SCTP sockets
- eth: macb: fix lost RX packet wakeup race in NAPI receive
- eth: intel stop disabling VFs due to PF error responses
- eth: bcmgenet: don't claim WOL when its not available
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=WfAR
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, and ipsec.
Current release - regressions:
- Bluetooth: fix unbalanced unlock in set_device_flags()
- Bluetooth: fix not processing all entries on cmd_sync_work, make
connect with qualcomm and intel adapters reliable
- Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"
- xdp: xdp_mem_allocator can be NULL in trace_mem_connect()
- eth: ice: fix race condition and deadlock during interface enslave
Current release - new code bugs:
- tipc: fix incorrect order of state message data sanity check
Previous releases - regressions:
- esp: fix possible buffer overflow in ESP transformation
- dsa: unlock the rtnl_mutex when dsa_master_setup() fails
- phy: meson-gxl: fix interrupt handling in forced mode
- smsc95xx: ignore -ENODEV errors when device is unplugged
Previous releases - always broken:
- xfrm: fix tunnel mode fragmentation behavior
- esp: fix inter address family tunneling on GSO
- tipc: fix null-deref due to race when enabling bearer
- sctp: fix kernel-infoleak for SCTP sockets
- eth: macb: fix lost RX packet wakeup race in NAPI receive
- eth: intel stop disabling VFs due to PF error responses
- eth: bcmgenet: don't claim WOL when its not available"
* tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
xdp: xdp_mem_allocator can be NULL in trace_mem_connect().
ice: Fix race condition during interface enslave
net: phy: meson-gxl: improve link-up behavior
net: bcmgenet: Don't claim WOL when its not available
net: arc_emac: Fix use after free in arc_mdio_probe()
sctp: fix kernel-infoleak for SCTP sockets
net: phy: correct spelling error of media in documentation
net: phy: DP83822: clear MISR2 register to disable interrupts
gianfar: ethtool: Fix refcount leak in gfar_get_ts_info
selftests: pmtu.sh: Kill nettest processes launched in subshell.
selftests: pmtu.sh: Kill tcpdump processes launched by subshell.
NFC: port100: fix use-after-free in port100_send_complete
net/mlx5e: SHAMPO, reduce TIR indication
net/mlx5e: Lag, Only handle events from highest priority multipath entry
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
net/mlx5: Fix a race on command flush flow
net/mlx5: Fix size field in bufferx_reg struct
ax25: Fix NULL pointer dereference in ax25_kill_by_device
net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr
net: ethernet: lpc_eth: Handle error for clk_enable
...
The previous patch made the follow changes:
- s/delivery_time_type/tstamp_type/
- s/bpf_skb_set_delivery_time/bpf_skb_set_tstamp/
- BPF_SKB_DELIVERY_TIME_* to BPF_SKB_TSTAMP_*
This patch is to change the test_tc_dtime.c to reflect the above.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220309090515.3712742-1-kafai@fb.com
This fixes a few issues reported by ShellCheck:
- SC2068: Double quote array expansions to avoid re-splitting elements.
- SC2206: Quote to prevent word splitting/globbing, or split robustly
with mapfile or read -a.
- SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
- SC2155: Declare and assign separately to avoid masking return values.
- SC2162: read without -r will mangle backslashes.
- SC2219: Instead of 'let expr', prefer (( expr )) .
- SC2181: Check exit code directly with e.g. 'if mycmd;', not indirectly
with $?.
- SC2236: Use -n instead of ! -z.
- SC2004: $/${} is unnecessary on arithmetic variables.
- SC2012: Use find instead of ls to better handle non-alphanumeric
filenames.
- SC2002: Useless cat. Consider 'cmd < file | ..' or 'cmd file | ..'
instead.
SC2086 (Double quotes to prevent globbing and word splitting) is ignored
because it is controlled for the moment and there are too many to
change.
While at it, also fixed the alignment in one comment.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As explained on ShellCheck's wiki [1], it is recommended to avoid
backquotes `...` in favour of parenthesis $(...):
> Backtick command substitution `...` is legacy syntax with several
> issues.
>
> - It has a series of undefined behaviors related to quoting in POSIX.
> - It imposes a custom escaping mode with surprising results.
> - It's exceptionally hard to nest.
>
> $(...) command substitution has none of these problems, and is
> therefore strongly encouraged.
[1] https://www.shellcheck.net/wiki/SC2006
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some vars are redefined in different places. Best to avoid this
classical Bash pitfall where variables are accidentally overridden by
other functions because the proper scope has not been defined.
Most issues are with loops: typically 'i' is used in for-loops but if it
is not global, calling a function from a for-loop also doing a for-loop
with the same non local 'i' variable causes troubles because the first
'i' will be assigned to another value. To prevent such issues, the
iterator variable is now declared as local just before the loop. If it
is always done like this, issues are avoided.
To distinct between local and non local variables, all non local ones
are defined at the beginning of the script. The others are now defined
with the "local" keyword.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is more readable and reduces duplicated commands.
This might also be useful to add v6 support and switch to nftables.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With ~100 tests, it helps to have this summary at the end not to scroll
to find which one has failed.
It is especially interseting when looking at the output produced by the
CI where the kernel logs from the serial are mixed together.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Running a specific test by giving the ID is often what we want: the CI
reports an issue with the Nth test, it is reproducible with:
./mptcp_join.sh N
But this might not work when there is a need to find which commit has
introduced a regression making a test unstable: failing from time to
time. Indeed, a specific test is not attached to one ID: the ID is in
fact a counter. It means the same test can have a different ID if other
tests have been added/removed before this unstable one.
Remembering the current test can also help listing failed tests at the
end.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Often, it is needed to run one specific test.
There are options to run subgroups of tests but when only one fails, no
need to run all the subgroup. So far, the solution was to edit the
script to comment the tests that are not needed but that's not ideal.
Now, it is possible to run one specific test by giving the ID of the
tests that are going to be validated, e.g.
./mptcp_join.sh 36 37
This is cleaner and saves time.
Technically, the reset* functions now return 0 if the test can be
executed. This naturally creates sections per test in the code which is
also helpful to understand what a test is exactly doing.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Best to always reset this env var before each test to avoid surprising
behaviour depending on the order tests are running.
Also clearly set it for the last failing links test is also needed when
only this test is executed.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding a new tests group, it has to be defined in multiple places:
- in the all_tests() function
- in the 'usage()' function
- in the getopts: short option + what to do when the option is used
Because it is easy to forget one of them, it is useful to have to define
them only once.
Note: only using an associative array would simplify the code but the
entries are stored in a hashtable and iterating over the different items
doesn't give the same order as the one used in the declaration of this
array. Because we want to run these tests in the same order as before, a
"simple" array is used first.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch dropped the msg argument of chk_csum_nr, to unify chk_csum_nr
with other chk_*_nr functions.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kernel/dma/map_benchmark.c and selftests/dma/dma_map_benchmark.c
have duplicate map_benchmark definitions, which tends to lead to
inconsistent changes to map_benchmark on both sides, extract a
common header file to avoid this problem.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When using "run_cmd <command> &", then "$!" refers to the PID of the
subshell used to run <command>, not the command itself. Therefore
nettest_pids actually doesn't contain the list of the nettest commands
running in the background. So cleanup() can't kill them and the nettest
processes run until completion (fortunately they have a 5s timeout).
Fix this by defining a new command for running processes in the
background, for which "$!" really refers to the PID of the command run.
Also, double quote variables on the modified lines, to avoid shellcheck
warnings.
Fixes: ece1278a9b ("selftests: net: add ESP-in-UDP PMTU test")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cleanup() function takes care of killing processes launched by the
test functions. It relies on variables like ${tcpdump_pids} to get the
relevant PIDs. But tests are run in their own subshell, so updated
*_pids values are invisible to other shells. Therefore cleanup() never
sees any process to kill:
$ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
$ pgrep -af tcpdump
6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
Fix this by running cleanup() in the context of the test subshell.
Now that each test cleans the environment after completion, there's no
need for calling cleanup() again when the next test starts. So let's
drop it from the setup() function. This is okay because cleanup() is
also called when pmtu.sh starts, so even the first test starts in a
clean environment.
Also, use tcpdump's immediate mode. Otherwise it might not have time to
process buffered packets, resulting in missing packets or even empty
pcap files for short tests.
Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can
still inspect the test environment upon failure when using -p.
Fixes: a92a0a7b8e ("selftests: pmtu: Simplify cleanup and namespace names")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds a selftest for the XDP_REDIRECT facility in BPF_PROG_RUN, that
redirects packets into a veth and counts them using an XDP program on the
other side of the veth pair and a TC program on the local side of the veth.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-6-toke@redhat.com
These will also be used by the xdp_do_redirect test being added in the next
commit.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-5-toke@redhat.com
Add checks for memblock_alloc_try_nid for bottom up allocation direction.
As the definition of this function is pretty close to the core
memblock_alloc_range_nid, the test cases implemented here cover most of
the code paths related to the memory allocations.
The tested scenarios are:
- Region can be allocated within the requested range (both with aligned
and misaligned boundaries)
- Region can be allocated between two already existing entries
- Not enough space between already reserved regions
- Memory at the range boundaries is reserved but there is enough space
to allocate a new region
- The memory range is too narrow but memory can be allocated before
the maximum address
- Edge cases:
+ Minimum address is below memblock_start_of_DRAM()
+ Maximum address is above memblock_end_of_DRAM()
Add test case wrappers to test both directions in the same context.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/1c0ba11b8da5dc8f71ad45175c536fa4be720984.1646055639.git.karolinadrobnik@gmail.com
Add tests for memblock_alloc_try_nid for top down allocation direction.
As the definition of this function is pretty close to the core
memblock_alloc_range_nid, the test cases implemented here cover most of
the code paths related to the memory allocations.
The tested scenarios are:
- Region can be allocated within the requested range (both with aligned
and misaligned boundaries)
- Region can be allocated between two already existing entries
- Not enough space between already reserved regions
- Memory range is too narrow but memory can be allocated before
the maximum address
- Edge cases:
+ Minimum address is below memblock_start_of_DRAM()
+ Maximum address is above memblock_end_of_DRAM()
Add checks for both allocation directions:
- Region starts at the min_addr and ends at max_addr
- Maximum address is too close to the beginning of the available
memory
- Memory at the range boundaries is reserved but there is enough space
to allocate a new region
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/d6c282e0f9f62c15bf74c216214604764232d637.1646055639.git.karolinadrobnik@gmail.com
Add checks for memblock_alloc_from for bottom up allocation direction.
The tested scenarios are:
- Not enough space to allocate memory at the minimal address
- Minimal address parameter is smaller than the start address
of the available memory
- Minimal address parameter is too close to the end of the available
memory
Add test case wrappers to test both directions in the same context.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/506cf5293c8a21c012b7ea87b14af07754d3e656.1646055639.git.karolinadrobnik@gmail.com
Add checks for memblock_alloc_from for default allocation direction.
The tested scenarios are:
- Not enough space to allocate memory at the minimal address
- Minimal address parameter is smaller than the start address
of the available memory
- Minimal address is too close to the available memory
Add simple memblock_alloc_from test that can be used to test both
allocation directions (minimal address is aligned or misaligned).
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/3dd645f437975fd393010b95b8faa85d2b86490a.1646055639.git.karolinadrobnik@gmail.com
Add checks for memblock_alloc for bottom up allocation direction.
The tested scenarios are:
- Region can be allocated on the first fit (with and without
region merging)
- Region can be allocated on the second fit (with and without
region merging)
Add test case wrappers to test both directions in the same context.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/426674eee20d99dca49caf1ee0142a83dccbc98d.1646055639.git.karolinadrobnik@gmail.com
Add checks for memblock_alloc for top down allocation direction.
The tested scenarios are:
- Region can be allocated on the first fit (with and without
region merging)
- Region can be allocated on the second fit (with and without
region merging)
Add checks for both allocation directions:
- Region can be allocated between two already existing entries
- Limited memory available
- All memory is reserved
- No available memory registered with memblock
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/26ccf409b8ff0394559d38d792b2afb24b55887c.1646055639.git.karolinadrobnik@gmail.com
Allocation functions that return virtual addresses (with an exception
of _raw variant) clear the allocated memory after reserving it. This
requires valid memory ranges in memblock.memory.
Introduce memory_block variable to store memory that can be registered
with memblock data structure. Move assert.h and size.h includes to common.h
to share them between the test files.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/dce115503c74a6936c44694b00014658a1bb6522.1646055639.git.karolinadrobnik@gmail.com
All memblock data structure fields are reset in one function. In some
test cases, it's preferred to reset memory region arrays without
modifying other values like allocation direction flag.
Extract two functions from reset_memblock, so it's possible to reset
different parts of memblock:
- reset_memblock_regions - reset region arrays and their counters
- reset_memblock_attributes - set other fields to their default values
Update checks in basic_api.c to use new definitions. Remove
reset_memblock call from memblock_initialization_check, so the true
initial values are tested.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/5cc1ba9a0ade922dbf4ba450165b81a9ed17d4a9.1646055639.git.karolinadrobnik@gmail.com
Ensure implicit endpoint are created when expected and
that the user-space can update them
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some edge scenarios, an MPTCP subflows can use a local address
mapped by a "implicit" endpoint created by the in-kernel path manager.
Such endpoints presence can be confusing, as it's creation is hard
to track and will prevent the later endpoint creation from the user-space
using the same address.
Define a new endpoint flag to mark implicit endpoints and allow the
user-space to replace implicit them with user-provided data at endpoint
creation time.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The in-kernel MPTCP path manager, when processing the MPTCP_PM_CMD_FLUSH_ADDR
command, generates RM_ADDR events for each known local address. While that
is allowed by the RFC, it makes unpredictable the exact number of RM_ADDR
generated when both ends flush the PM addresses.
This change restricts the RM_ADDR generation to previously explicitly
announced addresses, and adjust the expected results in a bunch of related
self-tests.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "selftests: mptcp: improve 'fair usage on close' stability" commit
changed that self test to check the TcpAttemptFails MIB instead of
looking for TW sockets. The associated bash function wasn't renamed in
that commit because of the merge conflicts it would cause, so this
commit updates the function name as Paolo originally intended.
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without this patch, no tests would be ran when launching:
mptcp_join.sh -cCi
In any order or a combination with 2 of these letters.
The recommended way with getopt is first parse all options and then act.
This allows to do some actions in priority, e.g. display the help menu
and stop.
But also some global variables changing the behaviour of this selftests
-- like the ones behind -cCi options -- can be set before running the
different tests. By doing that, we can also avoid long and unreadable
regex.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove unneeded spleep and increase length of dummy CPU
intensive computation to guarantee test process execution.
Also, complete aforemention computation as soon as
test success criteria is met
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220308200449.1757478-4-mykolal@fb.com
Substitute sleep with dummy CPU intensive computation.
Finish aforemention computation as soon as signal was
delivered to the test process. Make the BPF code to
only execute when PID global variable is set
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220308200449.1757478-3-mykolal@fb.com
Linux kernel may automatically reduce kernel.perf_event_max_sample_rate
value when running tests in parallel on slow systems. Linux kernel checks
against this limit when opening perf event with freq=1 parameter set.
The lower bound is 1000. This patch reduces sample_freq value to 1000
in all BPF tests that use sample_freq to ensure they always can open
perf event.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220308200449.1757478-2-mykolal@fb.com
Add a selftest that enables populating a VM with the maximum amount of
guest memory allowed by the underlying architecture. Abuse KVM's
memslots by mapping a single host memory region into multiple memslots so
that the selftest doesn't require a system with terabytes of RAM.
Default to 512gb of guest memory, which isn't all that interesting, but
should work on all MMUs and doesn't take an exorbitant amount of memory
or time. E.g. testing with ~64tb of guest memory takes the better part
of an hour, and requires 200gb of memory for KVM's page tables when using
4kb pages.
To inflicit maximum abuse on KVM' MMU, default to 4kb pages (or whatever
the not-hugepage size is) in the backing store (memfd). Use memfd for
the host backing store to ensure that hugepages are guaranteed when
requested, and to give the user explicit control of the size of hugepage
being tested.
By default, spin up as many vCPUs as there are available to the selftest,
and distribute the work of dirtying each 4kb chunk of memory across all
vCPUs. Dirtying guest memory forces KVM to populate its page tables, and
also forces KVM to write back accessed/dirty information to struct page
when the guest memory is freed.
On x86, perform two passes with a MMU context reset between each pass to
coerce KVM into dropping all references to the MMU root, e.g. to emulate
a vCPU dropping the last reference. Perform both passes and all
rendezvous on all architectures in the hope that arm64 and s390x can gain
similar shenanigans in the future.
Measure and report the duration of each operation, which is helpful not
only to verify the test is working as intended, but also to easily
evaluate the performance differences different page sizes.
Provide command line options to limit the amount of guest memory, set the
size of each slot (i.e. of the host memory region), set the number of
vCPUs, and to enable usage of hugepages.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-29-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add cpu_relax() for s390 and x86 for use in arch-agnostic tests. arm64
already defines its own version.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-28-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the code for allocating guest memory via memfd out of
vm_userspace_mem_region_add() and into a new helper, kvm_memfd_alloc().
A future selftest to populate a guest with the maximum amount of guest
memory will abuse KVM's memslots to alias guest memory regions to a
single memfd-backed host region, i.e. needs to back a guest with memfd
memory without a 1:1 association between a memslot and a memfd instance.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-27-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move set_memory_region_test's KVM_SET_USER_MEMORY_REGION helper to KVM's
utils so that it can be used by other tests. Provide a raw version as
well as an assert-success version to reduce the amount of boilerplate
code need for basic usage.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-26-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In test_lwt_ip_encap, the ingress IPv6 encap test failed from time to
time. The failure occured when an IPv4 ping through the IPv6 GRE
encapsulation did not receive a reply within the timeout. The IPv4 ping
and the IPv6 ping in the test used different timeouts (1 sec for IPv4
and 6 sec for IPv6), probably taking into account that IPv6 might need
longer to successfully complete. However, when IPv4 pings (with the
short timeout) are encapsulated into the IPv6 tunnel, the delays of IPv6
apply.
The actual reason for the long delays with IPv6 was that the IPv6
neighbor discovery sometimes did not complete in time. This was caused
by the outgoing interface only having a tentative link local address,
i.e., not having completed DAD for that lladdr. The ND was successfully
retried after 1 sec but that was too late for the ping timeout.
The IPv6 addresses for the test were already added with nodad. However,
for the lladdrs, DAD was still performed. We now disable DAD in the test
netns completely and just assume that the two lladdrs on each veth pair
do not collide. This removes all the delays for IPv6 traffic in the
test.
Without the delays, we can now also reduce the delay of the IPv6 ping to
1 sec. This makes the whole test complete faster because we don't need
to wait for the excessive timeout for each IPv6 ping that is supposed
to fail.
Fixes: 0fde56e438 ("selftests: bpf: add test_lwt_ip_encap selftest")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/4987d549d48b4e316cd5b3936de69c8d4bc75a4f.1646305899.git.fmaurer@redhat.com
This reverts commit 878aed8db3.
This change breaks existing setups where conntrack is used with
asymmetric paths.
In these cases, the NAT transformation occurs on the syn-ack instead of
the syn:
1. SYN x:12345 -> y -> 443 // sent by initiator, receiverd by responder
2. SYNACK y:443 -> x:12345 // First packet seen by conntrack, as sent by responder
3. tuple_force_port_remap() gets called, sees:
'tcp from 443 to port 12345 NAT' -> pick a new source port, inititor receives
4. SYNACK y:$RANDOM -> x:12345 // connection is never established
While its possible to avoid the breakage with NOTRACK rules, a kernel
update should not break working setups.
An alternative to the revert is to augment conntrack to tag
mid-stream connections plus more code in the nat core to skip NAT
for such connections, however, this leads to more interaction/integration
between conntrack and NAT.
Therefore, revert, users will need to add explicit nat rules to avoid
port shadowing.
Link: https://lore.kernel.org/netfilter-devel/20220302105908.GA5852@breakpoint.cc/#R
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2051413
Signed-off-by: Florian Westphal <fw@strlen.de>
Add a test for /dev/tpmrm0 in async mode that checks if
the code handles invalid handles correctly.
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <linux-integrity@vger.kernel.org>
Cc: <linux-kselftest@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Tested-by: Jarkko Sakkinen<jarkko@kernel.org>
Signed-off-by: Tadeusz Struk <tstruk@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Determine an available PCR bank to be used by a test case by querying the
capability TPM2_GET_CAP. The TPM2 returns TPML_PCR_SELECTIONS that
contains an array of TPMS_PCR_SELECTIONs indicating available PCR banks
and the bitmasks that show which PCRs are enabled in each bank. Collect
the data in a dictionary. From the dictionary determine the PCR bank that
has the PCRs enabled that the test needs. This avoids test failures with
TPM2's that either to not have a SHA-1 bank or whose SHA-1 bank is
disabled.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Dynamic linking when compiling on the host can cause issues when the
libc version does not match the one in the VM image. Update the
docs to explain how to do this.
Before:
./vmtest.sh -- ./test_progs -t test_ima
./test_progs: /usr/lib/libc.so.6: version `GLIBC_2.33' not found (required by ./test_progs)
After:
LDLIBS=-static ./vmtest.sh -- ./test_progs -t test_ima
test_ima:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Reported-by: "Geyslan G. Bem" <geyslan@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220307133048.1287644-1-kpsingh@kernel.org
If the test triggers a problem it may well result in a log message from
the kernel such as a WARN() or BUG(). If these include a PID it can help
with debugging to know if it was the parent or child process that triggered
the issue, since the test is just creating a new thread the process name
will be the same either way. Print the PIDs of the parent and child on
startup so users have this information to hand should it be needed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220303192817.2732509-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Include a testcase to check if the sysfs files for energy and frequency
related have its related attribute files exist and populated
Signed-off-by: Pratik R. Sampat <psampat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220217105321.52941-3-psampat@linux.ibm.com
Add test for real address or control memory address access
error handling, using NX-GZIP engine.
The error is injected by accessing the control memory address
using illegal instruction, on successful handling the process
attempting to access control memory address using illegal
instruction receives SIGBUS.
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220107141428.67862-2-ganeshgr@linux.ibm.com
The nds32 architecture, also known as AndeStar V3, is a custom 32-bit
RISC target designed by Andes Technologies. Support was added to the
kernel in 2016 as the replacement RISC-V based V5 processors were
already announced, and maintained by (current or former) Andes
employees.
As explained by Alan Kao, new customers are now all using RISC-V,
and all known nds32 users are already on longterm stable kernels
provided by Andes, with no development work going into mainline
support any more.
While the port is still in a reasonably good shape, it only gets
worse over time without active maintainers, so it seems best
to remove it before it becomes unusable. As always, if it turns
out that there are mainline users after all, and they volunteer
to maintain the port in the future, the removal can be reverted.
Link: https://lore.kernel.org/linux-mm/YhdWNLUhk+x9RAzU@yamatobi.andestech.com/
Link: https://lore.kernel.org/lkml/20220302065213.82702-1-alankao@andestech.com/
Link: https://www.andestech.com/en/products-solutions/andestar-architecture/
Signed-off-by: Alan Kao <alankao@andestech.com>
[arnd: rewrite changelog to provide more background]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge a topic branch we are maintaining with some cross-architecture
changes to function descriptor handling and their use in LKDTM.
From Christophe's cover letter:
Fix LKDTM for PPC64/IA64/PARISC
PPC64/IA64/PARISC have function descriptors. LKDTM doesn't work on those
three architectures because LKDTM messes up function descriptors with
functions.
This series does some cleanup in the three architectures and refactors
function descriptors so that it can then easily use it in a generic way
in LKDTM.
Fit the following coccicheck warning:
tools/testing/selftests/net/reuseport_bpf_numa.c:89:28-29:
WARNING: Use ARRAY_SIZE.
It has been tested with gcc (Debian 8.3.0-6) 8.3.0 on x86_64.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test for percpu btf_type_tag. Similar to the "user" tag, we test
the following cases:
1. __percpu struct field.
2. __percpu as function parameter.
3. per_cpu_ptr() accepts dynamically allocated __percpu memory.
Because the test for "user" and the test for "percpu" are very similar,
a little bit of refactoring has been done in btf_tag.c. Basically, both
tests share the same function for loading vmlinux and module btf.
Example output from log:
> ./test_progs -v -t btf_tag
libbpf: prog 'test_percpu1': BPF program load failed: Permission denied
libbpf: prog 'test_percpu1': -- BEGIN PROG LOAD LOG --
...
; g = arg->a;
1: (61) r1 = *(u32 *)(r1 +0)
R1 is ptr_bpf_testmod_btf_type_tag_1 access percpu memory: off=0
...
test_btf_type_tag_mod_percpu:PASS:btf_type_tag_percpu 0 nsec
#26/6 btf_tag/btf_type_tag_percpu_mod1:OK
libbpf: prog 'test_percpu2': BPF program load failed: Permission denied
libbpf: prog 'test_percpu2': -- BEGIN PROG LOAD LOG --
...
; g = arg->p->a;
2: (61) r1 = *(u32 *)(r1 +0)
R1 is ptr_bpf_testmod_btf_type_tag_1 access percpu memory: off=0
...
test_btf_type_tag_mod_percpu:PASS:btf_type_tag_percpu 0 nsec
#26/7 btf_tag/btf_type_tag_percpu_mod2:OK
libbpf: prog 'test_percpu_load': BPF program load failed: Permission denied
libbpf: prog 'test_percpu_load': -- BEGIN PROG LOAD LOG --
...
; g = (__u64)cgrp->rstat_cpu->updated_children;
2: (79) r1 = *(u64 *)(r1 +48)
R1 is ptr_cgroup_rstat_cpu access percpu memory: off=48
...
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu_load 0 nsec
#26/8 btf_tag/btf_type_tag_percpu_vmlinux_load:OK
load_btfs:PASS:could not load vmlinux BTF 0 nsec
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu 0 nsec
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu_helper 0 nsec
#26/9 btf_tag/btf_type_tag_percpu_vmlinux_helper:OK
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220304191657.981240-5-haoluo@google.com
Include a few verifier selftests that test against the problems being
fixed by previous commits, i.e. release kfunc always require
PTR_TO_BTF_ID fixed and var_off to be 0, and negative offset is not
permitted and returns a helpful error message.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-9-memxor@gmail.com
check_ptr_off_reg only allows fixed offset to be set for PTR_TO_BTF_ID,
where reg->off < 0 doesn't make sense. This would shift the pointer
backwards, and fails later in btf_struct_ids_match or btf_struct_walk
due to out of bounds access (since offset is interpreted as unsigned).
Improve the verifier by rejecting this case by using a better error
message for BPF helpers and kfunc, by putting a check inside the
check_func_arg_reg_off function.
Also, update existing verifier selftests to work with new error string.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-4-memxor@gmail.com
The error message when I build vm tests on debian10 (GLIBC 2.28):
userfaultfd.c: In function `userfaultfd_pagemap_test':
userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use
in this function); did you mean `MADV_RANDOM'?
if (madvise(area_dst, test_pgsize, MADV_PAGEOUT))
^~~~~~~~~~~~
MADV_RANDOM
This patch includes these newer definitions from UAPI linux/mman.h, is
useful to fix tests build on systems without these definitions in glibc
sys/mman.h.
Link: https://lkml.kernel.org/r/20220227055330.43087-2-zhouchengming@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The hugepage-mremap test will create a file in a hugetlb filesystem. In
a default 'run_vmtests' run, the file will contain all the hugetlb
pages. After the test, the file remains and there are no free hugetlb
pages for subsequent tests. This causes those hugetlb tests to fail.
Change hugepage-mremap to take the name of the hugetlb file as an
argument. Unlink the file within the test, and just to be sure remove
the file in the run_vmtests script.
Link: https://lkml.kernel.org/r/20220201033459.156944-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Building memblock simulator on x86_64 with 32BIT_PHYS_ADDR_T=1
produces "cast to pointer from integer of different size" warnings.
Fix them by building the binary in 32-bit environment when using
32-bit physical addresses.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Add a selftest validating various aspects of libbpf's handling of custom
SEC() handlers. It also demonstrates how libraries can ensure very early
callbacks registration and unregistration using
__attribute__((constructor))/__attribute__((destructor)) functions.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220305010129.1549719-4-andrii@kernel.org
This patch updated the output info of chk_rm_nr. Renamed 'sf' to 'rmsf',
which means 'remove subflow'. Added the display of whether the inverted
namespaces has been used to check the mib counters.
The new output looks like this:
002 remove multiple subflows syn[ ok ] - synack[ ok ] - ack[ ok ]
rm [ ok ] - rmsf [ ok ]
003 remove single address syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
rm [ ok ] - rmsf [ ok ] invert
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added five more arguments for chk_join_nr(). The default
values of them are all zero.
The first two, csum_ns1 and csum_ns1, are passed to chk_csum_nr(), to
check the mib counters of the checksum errors in ns1 and ns2. A '+'
can be added into this two arguments to represent that multiple
checksum errors are allowed when doing this check. For example,
chk_csum_nr "" +2 +2
indicates that two or more checksum errors are allowed in both ns1 and
ns2.
The remaining two, fail_nr and rst_nr, are passed to chk_fail_nr() and
chk_rst_nr() respectively, to check the sending and receiving mib
counters of MP_FAIL and MP_RST.
Also did some cleanups in chk_fail_nr(), renamed two local variables
and updated the output message.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the invert bytes check for the output data in
check_transfer().
Instead of the file mismatch error:
[ FAIL ] file received by server does not match (in, out):
-rw------- 1 root root 45643832 Jan 16 15:04 /tmp/tmp.9xpM6Paivv
Trailing bytes are:
MPTCP_TEST_FILE_END_MARKER
-rw------- 1 root root 45643832 Jan 16 15:04 /tmp/tmp.wnz1Yp4u7Z
Trailing bytes are:
MPTCP_TEST_FILE_END_MARKER
Print out the inverted bytes like this:
file received by server has inverted byte at 7454789
file received by server has inverted byte at 7454790
file received by server has inverted byte at 7454791
file received by server has inverted byte at 7454792
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the self test for MP_FASTCLOSE. Reused the argument
addr_nr_ns2 of do_transfer() to pass the extra arguments '-I 2' to
mptcp_connect commands. Then mptcp_connect disconnected the
connections to trigger the MP_FASTCLOSE sending and receiving. Used
chk_fclose_nr to check the MP_FASTCLOSE mibs and used chk_rst_nr to
check the MP_RST mibs. This test used the test_linkfail value to make
1024KB test files.
The output looks like this:
Created /tmp/tmp.XB8sfv1hJ0 (size 1024 KB) containing data sent by client
Created /tmp/tmp.RtTDbzqrXI (size 1024 KB) containing data sent by server
001 fastclose test syn[ ok ] - synack[ ok ] - ack[ ok ]
ctx[ ok ] - fclzrx[ ok ]
rtx[ ok ] - rstrx [ ok ] invert
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch reused the test_linkfail values above 2 to make test files with
the given sizes (KB) for both the client side and the server side. It's
useful for the test cases using different file sizes.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using a global variable mptcp_connect, this patch added
a new local variable extra_args in do_transfer() to store the extra
arguments passing to the mptcp_connect commands.
This patch also renamed the speed level 'least' to 'speed_*'. This
more flexible way can avoid the need to add new speed levels in the
future.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added a new function chk_rst_nr() to check the numbers
of the MP_RST sending and receiving mibs.
Showed in the output whether the inverted namespaces check order is used.
Since if we pass -Cz to mptcp_join.sh, the MP_RST information is showed
twice.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added a new function chk_fclose_nr() to check the numbers
of the MP_FASTCLOSE sending and receiving mibs.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of self tests in mptcp_join.sh will soon be more than 100, the
output alignment is no longer OK. This patch adjusted it.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-03-04
We've added 32 non-merge commits during the last 14 day(s) which contain
a total of 59 files changed, 1038 insertions(+), 473 deletions(-).
The main changes are:
1) Optimize BPF stackmap's build_id retrieval by caching last valid build_id,
as consecutive stack frames are likely to be in the same VMA and therefore
have the same build id, from Hao Luo.
2) Several improvements to arm64 BPF JIT, that is, support for JITing
the atomic[64]_fetch_add, atomic[64]_[fetch_]{and,or,xor} and lastly
atomic[64]_{xchg|cmpxchg}. Also fix the BTF line info dump for JITed
programs, from Hou Tao.
3) Optimize generic BPF map batch deletion by only enforcing synchronize_rcu()
barrier once upon return to user space, from Eric Dumazet.
4) For kernel build parse DWARF and generate BTF through pahole with enabled
multithreading, from Kui-Feng Lee.
5) BPF verifier usability improvements by making log info more concise and
replacing inv with scalar type name, from Mykola Lysenko.
6) Two follow-up fixes for BPF prog JIT pack allocator, from Song Liu.
7) Add a new Kconfig to allow for loading kernel modules with non-matching
BTF type info; their BTF info is then removed on load, from Connor O'Brien.
8) Remove reallocarray() usage from bpftool and switch to libbpf_reallocarray()
in order to fix compilation errors for older glibc, from Mauricio Vásquez.
9) Fix libbpf to error on conflicting name in BTF when type declaration
appears before the definition, from Xu Kuohai.
10) Fix issue in BPF preload for in-kernel light skeleton where loaded BPF
program fds prevent init process from setting up fd 0-2, from Yucong Sun.
11) Fix libbpf reuse of pinned perf RB map when max_entries is auto-determined
by libbpf, from Stijn Tintel.
12) Several cleanups for libbpf and a fix to enforce perf RB map #pages to be
non-zero, from Yuntao Wang.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (32 commits)
bpf: Small BPF verifier log improvements
libbpf: Add a check to ensure that page_cnt is non-zero
bpf, x86: Set header->size properly before freeing it
x86: Disable HAVE_ARCH_HUGE_VMALLOC on 32-bit x86
bpf, test_run: Fix overflow in XDP frags bpf_test_finish
selftests/bpf: Update btf_dump case for conflicting names
libbpf: Skip forward declaration when counting duplicated type names
bpf: Add some description about BPF_JIT_ALWAYS_ON in Kconfig
bpf, docs: Add a missing colon in verifier.rst
bpf: Cache the last valid build_id
libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinning
bpf, selftests: Use raw_tp program for atomic test
bpf, arm64: Support more atomic operations
bpftool: Remove redundant slashes
bpf: Add config to allow loading modules with BTF mismatches
bpf, arm64: Feed byte-offset into bpf line info
bpf, arm64: Call build_prologue() first in first JIT pass
bpf: Fix issue with bpf preload module taking over stdout/stdin of kernel.
bpftool: Bpf skeletons assert type sizes
bpf: Cleanup comments
...
====================
Link: https://lore.kernel.org/r/20220304164313.31675-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Build of bpf and tc-testing selftests fails when the relative path of
the build directory is specified.
make -C tools/testing/selftests O=build0
make[1]: Entering directory '/linux_mainline/tools/testing/selftests/bpf'
../../../scripts/Makefile.include:4: *** O=build0 does not exist. Stop.
make[1]: Entering directory '/linux_mainline/tools/testing/selftests/tc-testing'
../../../scripts/Makefile.include:4: *** O=build0 does not exist. Stop.
Makefiles of bpf and tc-testing include scripts/Makefile.include file.
This file has sanity checking inside it which checks the output path.
The output path is not relative to the bpf or tc-testing. The sanity
check fails. Expand the output path to get rid of this error. The fix is
the same as mentioned in commit 150a27328b ("bpf, preload: Fix build
when $(O) points to a relative path").
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch fixed the following build error on openSUSE Leap 15.3:
=======================================================================
gcc nf-queue.c -lmnl -o tools/testing/selftests/netfilter/nf-queue
nf-queue.c:13:10: fatal error: libmnl/libmnl.h: No such file or directory
#include <libmnl/libmnl.h>
^~~~~~~~~~~~~~~~~
compilation terminated.
=======================================================================
It is because libmnl.h is put in the directory of
"/usr/include/libmnl/libmnl/" on openSUSE, not "/usr/include/libmnl/":
> rpm -ql libmnl-devel
/usr/include/libmnl
/usr/include/libmnl/libmnl
/usr/include/libmnl/libmnl/libmnl.h
/usr/lib64/libmnl.so
/usr/lib64/pkgconfig/libmnl.pc
Suggested-by: Kai Liu <kai.liu@suse.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add kselftest_install directory to the .gitignore which is created while
creation of tar ball of objects:
make -C tools/testing/selftests gen_tar
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
bluetooth, and netfilter.
Current release - regressions:
- iwlwifi: don't advertise TWT support, prevent FW crash
- xfrm: fix the if_id check in changelink
- xen/netfront: destroy queues before real_num_tx_queues is zeroed
- bluetooth: fix not checking MGMT cmd pending queue, make scanning
work again
Current release - new code bugs:
- mptcp: make SIOCOUTQ accurate for fallback socket
- bluetooth: access skb->len after null check
- bluetooth: hci_sync: fix not using conn_timeout
- smc: fix cleanup when register ULP fails
- dsa: restore error path of dsa_tree_change_tag_proto
- iwlwifi: fix build error for IWLMEI
- iwlwifi: mvm: propagate error from request_ownership to the user
Previous releases - regressions:
- xfrm: fix pMTU regression when reported pMTU is too small
- xfrm: fix TCP MSS calculation when pMTU is close to 1280
- bluetooth: fix bt_skb_sendmmsg not allocating partial chunks
- ipv6: ensure we call ipv6_mc_down() at most once, prevent leaks
- ipv6: prevent leaks in igmp6 when input queues get full
- fix up skbs delta_truesize in UDP GRO frag_list
- eth: e1000e: fix possible HW unit hang after an s0ix exit
- eth: e1000e: correct NVM checksum verification flow
- ptp: ocp: fix large time adjustments
Previous releases - always broken:
- tcp: make tcp_read_sock() more robust in presence of urgent data
- xfrm: distinguishing SAs and SPs by if_id in xfrm_migrate
- xfrm: fix xfrm_migrate issues when address family changes
- dcb: flush lingering app table entries for unregistered devices
- smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error
- mac80211: fix EAPoL rekey fail in 802.3 rx path
- mac80211: fix forwarded mesh frames AC & queue selection
- netfilter: nf_queue: fix socket access races and bugs
- batman-adv: fix ToCToU iflink problems and check the result
belongs to the expected net namespace
- can: gs_usb, etas_es58x: fix opened_channel_cnt's accounting
- can: rcar_canfd: register the CAN device when fully ready
- eth: igb, igc: phy: drop premature return leaking HW semaphore
- eth: ixgbe: xsk: change !netif_carrier_ok() handling in
ixgbe_xmit_zc(), prevent live lock when link goes down
- eth: stmmac: only enable DMA interrupts when ready
- eth: sparx5: move vlan checks before any changes are made
- eth: iavf: fix races around init, removal, resets and vlan ops
- ibmvnic: more reset flow fixes
Misc:
- eth: fix return value of __setup handlers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TqqZ
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, xfrm, wifi, bluetooth, and netfilter.
Lots of various size fixes, the length of the tag speaks for itself.
Most of the 5.17-relevant stuff comes from xfrm, wifi and bt trees
which had been lagging as you pointed out previously. But there's also
a larger than we'd like portion of fixes for bugs from previous
releases.
Three more fixes still under discussion, including and xfrm revert for
uAPI error.
Current release - regressions:
- iwlwifi: don't advertise TWT support, prevent FW crash
- xfrm: fix the if_id check in changelink
- xen/netfront: destroy queues before real_num_tx_queues is zeroed
- bluetooth: fix not checking MGMT cmd pending queue, make scanning
work again
Current release - new code bugs:
- mptcp: make SIOCOUTQ accurate for fallback socket
- bluetooth: access skb->len after null check
- bluetooth: hci_sync: fix not using conn_timeout
- smc: fix cleanup when register ULP fails
- dsa: restore error path of dsa_tree_change_tag_proto
- iwlwifi: fix build error for IWLMEI
- iwlwifi: mvm: propagate error from request_ownership to the user
Previous releases - regressions:
- xfrm: fix pMTU regression when reported pMTU is too small
- xfrm: fix TCP MSS calculation when pMTU is close to 1280
- bluetooth: fix bt_skb_sendmmsg not allocating partial chunks
- ipv6: ensure we call ipv6_mc_down() at most once, prevent leaks
- ipv6: prevent leaks in igmp6 when input queues get full
- fix up skbs delta_truesize in UDP GRO frag_list
- eth: e1000e: fix possible HW unit hang after an s0ix exit
- eth: e1000e: correct NVM checksum verification flow
- ptp: ocp: fix large time adjustments
Previous releases - always broken:
- tcp: make tcp_read_sock() more robust in presence of urgent data
- xfrm: distinguishing SAs and SPs by if_id in xfrm_migrate
- xfrm: fix xfrm_migrate issues when address family changes
- dcb: flush lingering app table entries for unregistered devices
- smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error
- mac80211: fix EAPoL rekey fail in 802.3 rx path
- mac80211: fix forwarded mesh frames AC & queue selection
- netfilter: nf_queue: fix socket access races and bugs
- batman-adv: fix ToCToU iflink problems and check the result belongs
to the expected net namespace
- can: gs_usb, etas_es58x: fix opened_channel_cnt's accounting
- can: rcar_canfd: register the CAN device when fully ready
- eth: igb, igc: phy: drop premature return leaking HW semaphore
- eth: ixgbe: xsk: change !netif_carrier_ok() handling in
ixgbe_xmit_zc(), prevent live lock when link goes down
- eth: stmmac: only enable DMA interrupts when ready
- eth: sparx5: move vlan checks before any changes are made
- eth: iavf: fix races around init, removal, resets and vlan ops
- ibmvnic: more reset flow fixes
Misc:
- eth: fix return value of __setup handlers"
* tag 'net-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report()
net: dsa: make dsa_tree_change_tag_proto actually unwind the tag proto change
ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()
selftests: mlxsw: resource_scale: Fix return value
selftests: mlxsw: tc_police_scale: Make test more robust
net: dcb: disable softirqs in dcbnl_flush_dev()
bnx2: Fix an error message
sfc: extend the locking on mcdi->seqno
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client
net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()
tcp: make tcp_read_sock() more robust
bpf, sockmap: Do not ignore orig_len parameter
net: ipa: add an interconnect dependency
net: fix up skbs delta_truesize in UDP GRO frag_list
iwlwifi: mvm: return value for request_ownership
nl80211: Update bss channel on channel switch for P2P_CLIENT
iwlwifi: fix build error for IWLMEI
ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments
batman-adv: Don't expect inter-netns unique iflink indices
...
The test runs several test cases and is supposed to return an error in
case at least one of them failed.
Currently, the check of the return value of each test case is in the
wrong place, which can result in the wrong return value. For example:
# TESTS='tc_police' ./resource_scale.sh
TEST: 'tc_police' [default] 968 [FAIL]
tc police offload count failed
Error: mlxsw_spectrum: Failed to allocate policer index.
We have an error talking to the kernel
Command failed /tmp/tmp.i7Oc5HwmXY:969
TEST: 'tc_police' [default] overflow 969 [ OK ]
...
TEST: 'tc_police' [ipv4_max] overflow 969 [ OK ]
$ echo $?
0
Fix this by moving the check to be done after each test case.
Fixes: 059b18e21c ("selftests: mlxsw: Return correct error code in resource scale test")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test adds tc filters and checks how many of them were offloaded by
grepping for 'in_hw'.
iproute2 commit f4cd4f127047 ("tc: add skip_hw and skip_sw to control
action offload") added offload indication to tc actions, producing the
following output:
$ tc filter show dev swp2 ingress
...
filter protocol ipv6 pref 1000 flower chain 0 handle 0x7c0
eth_type ipv6
dst_ip 2001:db8:1::7bf
skip_sw
in_hw in_hw_count 1
action order 1: police 0x7c0 rate 10Mbit burst 100Kb mtu 2Kb action drop overhead 0b
ref 1 bind 1
not_in_hw
used_hw_stats immediate
The current grep expression matches on both 'in_hw' and 'not_in_hw',
resulting in incorrect results.
Fix that by using JSON output instead.
Fixes: 5061e77326 ("selftests: mlxsw: Add scale test for tc-police")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In particular these include:
1) Remove output of inv for scalars in print_verifier_state
2) Replace inv with scalar in verifier error messages
3) Remove _value suffixes for umin/umax/s32_min/etc (except map_value)
4) Remove output of id=0
5) Remove output of ref_obj_id=0
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220301222745.1667206-1-mykolal@fb.com
This patch adds tests on forwarding the delivery_time for
the following cases
- tcp/udp + ip4/ip6 + bpf_redirect_neigh
- tcp/udp + ip4/ip6 + ip[6]_forward
- bpf_skb_set_delivery_time
- The old rcv timestamp expectation on tc-bpf@ingress
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that verifies operation of L3 HW statistics.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tests file configuration and error handling of the Intel Software
Defined Silicon sysfs ABI.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220225012457.1661574-2-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Use kfree_rcu(ptr, rcu) variant, using kfree_rcu(ptr) was not
intentional. From Eric Dumazet.
2) Use-after-free in netfilter hook core, from Eric Dumazet.
3) Missing rcu read lock side for netfilter egress hook,
from Florian Westphal.
4) nf_queue assume state->sk is full socket while it might not be.
Invoke sock_gen_put(), from Florian Westphal.
5) Add selftest to exercise the reported KASAN splat in 4)
6) Fix possible use-after-free in nf_queue in case sk_refcnt is 0.
Also from Florian.
7) Use input interface index only for hardware offload, not for
the software plane. This breaks tc ct action. Patch from Paul Blakey.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
net/sched: act_ct: Fix flow table lookup failure with no originating ifindex
netfilter: nf_queue: handle socket prefetch
netfilter: nf_queue: fix possible use-after-free
selftests: netfilter: add nfqueue TCP_NEW_SYN_RECV socket race test
netfilter: nf_queue: don't assume sk is full socket
netfilter: egress: silence egress hook lockdep splats
netfilter: fix use-after-free in __nf_register_net_hook()
netfilter: nf_tables: prefer kfree_rcu(ptr, rcu) variant
====================
Link: https://lore.kernel.org/r/20220301215337.378405-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
second patch was supposed to fix the first, but in reality it was
just as broken, so both have to go.
x86 host:
* Revert incorrect assumption that cr3 changes come with preempt notifier
callbacks (they don't when static branches are changed, for example)
ARM host:
* Correctly synchronise PMR and co on PSCI CPU_SUSPEND
* Skip tests that depend on GICv3 when the HW isn't available
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmIeGnUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMCYgf9GPVUOQUbHVxVqvKB1ABnY3ZIZuS3
+/XLgVifSmXb2sPQmcKIPk7eQkxlzpnVdbznJO5qFMtVKRv/ppj+/ly2wwF8l+rR
m1XvyYo2sukK5vTpBrQiRm3aWY7vpx0ds4DStLnrnBuPF/U7x6WlHSL/BqXaNcSJ
e+SXd/UFhkg7dEQaU3eqXyf2/mMfR2ZLdUb4v+/UiV7kfzzvRqNERd8HUoVk2FcM
VYBr07ChaV4XB/dZsCDVSz2Z7f7rH3sMMW82ZHKjuFUEW4Dij9NiX2ycaeRvkSLG
tnliTuROCY2bOQeIVCTHf5XqCAAm7sA1AoClFaUy30+UW9s9j45NuhUQbA==
=nuHK
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"The bigger part of the change is a revert for x86 hosts. Here the
second patch was supposed to fix the first, but in reality it was just
as broken, so both have to go.
x86 host:
- Revert incorrect assumption that cr3 changes come with preempt
notifier callbacks (they don't when static branches are changed,
for example)
ARM host:
- Correctly synchronise PMR and co on PSCI CPU_SUSPEND
- Skip tests that depend on GICv3 when the HW isn't available"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: aarch64: Skip tests if we can't create a vgic-v3
Revert "KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()"
Revert "KVM: VMX: Save HOST_CR3 in vmx_set_host_fs_gs()"
KVM: arm64: Don't miss pending interrupts for suspended vCPU
The main thing that the selftest verifies is that KVM copies x2APIC's
ICR[63:32] to/from ICR2 when userspace accesses the vAPIC page via
KVM_{G,S}ET_LAPIC. KVM previously split x2APIC ICR to ICR+ICR2 at the
time of write (from the guest), and so KVM must preserve that behavior
for backwards compatibility between different versions of KVM.
It will also test other invariants, e.g. that KVM clears the BUSY
flag on ICR writes, that the reserved bits in ICR2 are dropped on writes
from the guest, etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update btf_dump case for conflicting names caused by forward declaration.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220301053250.1464204-3-xukuohai@huawei.com
The testcase uses event code 0x35340401e0 to verify the settings for
different fields in Monitor Mode Control Register A (MMCRA). The fields
include thresh_start, thresh_stop thresh_select, sdar mode, sample and
marked bit. Checks if these fields are translated correctly via perf
interface to MMCRA.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-21-kjain@linux.ibm.com
The testcase uses event code 0x1340000001c040 to verify the settings for
different src fields in Monitor Mode Control Register 3 (MMCR3). Checks
if these fields are translated correctly via perf interface to MMCR3 on
ISA v3.1 platform.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-20-kjain@linux.ibm.com
The testcases uses cycles event to verify the freeze counter settings in
Monitor Mode Control Register 2 (MMCR2). Event modifier (exclude_kernel)
setting is used for the event attribute to check the FCxS and FCxH (
Freeze counter in privileged and hypervisor state ) settings via perf
interface.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add error checking, check MSR for MSR_HV, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-19-kjain@linux.ibm.com
The testcases uses event code 0x010000046080 to verify the l2l3 bit
setting for Monitor Mode Control Register 2 (MMCR2). check if this bit
is set correctly via perf interface in ISA v3.1 platform.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-18-kjain@linux.ibm.com
The testcase uses event code "0x26880" to verify the settings for
different fields in Monitor Mode Control Register 1 (MMCR1). The field
include PMCxCOMB. Checks if this field are translated correctly via perf
interface to MMCR1
Add selftest for mmcr1 comb field.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-16-kjain@linux.ibm.com
The testcase uses event code 0x500fa to verify the FC5-6 bit setting in
Monitor Mode Control Register 0 (MMCR0). Check if FC5-6 bit is not set
in MMCR0 when using Performance Monitor Counter 5 and 6 (PMC5 and PMC6).
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-15-kjain@linux.ibm.com
The testcase uses event code 0x1001e to verify two bit settings (FC5-6
and PMC1CE) in Monitor Mode Control Register 0 (MMCR0). Check if FC5-6
bit to be set in MMCR0 when not using Performance Monitor Counter 5 and
6 (PMC5 and PMC6). And also PMC1CE is expected to be set when using
PMC1. Test if these fields are programmed correctly via perf interface.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-14-kjain@linux.ibm.com
The testcase uses event code 0x500fa ("instructions") to verify the
PMCjCE bit setting in Monitor Mode Control Register 0 (MMCR0). This bit
is expected to be set in MMCR0 when using Performance Monitor Counter
5 (PMC5). Checks if perf interface sets this bit correctly.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-13-kjain@linux.ibm.com
The testcase uses cycles event to check the PMCCEXT bit setting in
Monitor Mode Control Register 0 (MMCR0). Check if perf interface sets
this control bit in MMCR0 on ISA v3.1 platform.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-12-kjain@linux.ibm.com
The testcase uses event code 0x500fa ("instructions") to check the
CC56RUN bit setting in Monitor Mode Control Register 0(MMCR0). In ISA
v3.1 platform, this bit is expected to be set in MMCR0 when using
Performance Monitor Counter 5 and 6 (PMC5 and PMC6). Verify this is done
correctly by perf interface.
CC56RUN bit makes PMC5 and PMC6 count regardless of the run latch state.
This bit is set in power10 since PMC5 and PMC6 is used in power10 for
counting instructions and cycles. Hence added a check to skip this test
in other platforms
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-11-kjain@linux.ibm.com
The testcase uses "instructions" event to verify two bits(PMAE and PMAO)
in Monitor Mode Control Register 0 (MMCR0). At the time of interrupt,
pmae bit ( which enables performance monitor exception ) is expected to
be cleared and pmao (which indicates performance monitor alert) bit is
expected to be set in MMCR0. And testcases handles these checks.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-10-kjain@linux.ibm.com
Add macro and utility functions to fetch individual fields from Monitor
Mode Control Register 0(MMCR0) and Monitor Mode Control Register
1(MMCR1) PMU register.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-8-kjain@linux.ibm.com
Along with it, Add macros and utility functions to fetch individual
fields from Monitor Mode Control Register 2(MMCR2) register.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-7-kjain@linux.ibm.com
Extended event_init_opts() to include initialization of sampling
testcases. Patch adds an event_init_sampling() wrapper to initialize
event attribute fields for sampling events. This includes initializing
sample period, sample type and event type.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-6-kjain@linux.ibm.com
Add couple of basic utility functions to post process the mmap buffer.
It includes function to read the total number of samples present in the
mmap buffer and function to get the address of the first sample.
Add function "get_intr_regs" which will return pointer to interrupt
registers present in the sample, incase sample type
PERF_SAMPLE_REGS_INTR is set.
Add functions "get_reg_value" which can be used to read any interrupt
register value from a given sample.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-5-kjain@linux.ibm.com
Each platform has raw event encoding format which specifies the bit
positions for different fields. The fields from event code gets
translated into performance monitoring mode control register (MMCRx)
settings. Patch add macros to extract individual fields from the event
code.
Add functions for sanity checks, since testcases currently are only
supported in power9 and power10.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Read PVR directly rather than using /proc/cpuinfo]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-4-kjain@linux.ibm.com
Add support functions for enabling perf sampling test in a new folder
"sampling_tests" under "selftests/powerpc/pmu". This includes support
functions for allocating and processing the mmap buffer. These functions
are added/defined in "sampling_tests/misc.*" files.
Also updates the corresponding Makefiles in "selftests/powerpc" and
"sampling_tests" folder.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Drop unneeded bits from the Makefile]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-3-kjain@linux.ibm.com
causes:
BUG: KASAN: slab-out-of-bounds in sk_free+0x25/0x80
Write of size 4 at addr ffff888106df0284 by task nf-queue/1459
sk_free+0x25/0x80
nf_queue_entry_release_refs+0x143/0x1a0
nf_reinject+0x233/0x770
... without 'netfilter: nf_queue: don't assume sk is full socket'.
Signed-off-by: Florian Westphal <fw@strlen.de>
This patch adds a new test script test_vxlan_vnifiltering.sh
with tests for vni filtering api, various datapath tests.
Also has a test with a mix of traditional, metadata and vni
filtering devices inuse at the same time.
Signed-off-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now atomic tests will attach fentry program and run it through
bpf_prog_test_run_opts(), but attaching fentry program depends on BPF
trampoline which is only available under x86-64. Considering many archs
have atomic support, using raw_tp program instead.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220217072232.1186625-5-houtao1@huawei.com
To enable the capturing of samples as part of perf event, add a new
field "mmap_buffer" to "struct event". This field is a place-holder for
sample collection
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-2-kjain@linux.ibm.com
Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
memfd-hugetlb: SEAL-SHRINK
fallocate(ALLOC) failed: No space left on device
./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs
opening: ./mnt/memfd
fuse: DONE
If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap. As a
result, two hugetlb pages remain reserved for the mapping. When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.
Fix by making sure to unmap in mfd_fail_write.
Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some problems with reading the RTC time may happen rarely, for example
while the RTC is updating. So read the RTC many times to catch these
problems. For example, a previous attempt for my
commit ea6fa4961a ("rtc: mc146818-lib: fix RTC presence check")
was incorrect and would have triggered this selftest.
To avoid the risk of damaging the hardware, wait 11ms before consecutive
reads.
In rtc_time_to_timestamp I copied values manually instead of casting -
just to be on the safe side. The 11ms wait period was chosen so that it is
not a divisor of 1000ms.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Yonghong Song
Mark Brown
Sean Christopherson
Andrew Jones
Linus Torvalds
Feng Zhou
Jason A. Donenfeld
Paolo Bonzini
David Matlack
Jakub Kicinski
Chenyi Qiang
Guo Zhengkui
Zeng Guang
Maciej S. Szmigiero
Toke Høiland-Jørgensen
Vitaly Kuznetsov
Lina Wang
Hangbin Liu
Martin KaFai Lau
Yuntao Wang
Daniel Müller
Cristian Marussi
Thomas Huth
Florian Westphal
Arun Ajith S
Michal Koutný
Song Liu
luyun
Patrick Wang
Muhammad Usama Anjum
Julia Lawall
Suren Baghdasaryan
Christophe JAILLET
Like Xu
Yang Weijiang
Joanne Koong
Colin Ian King
Mickaël Salaün
Vladimir Oltean
Madhavan Srinivasan
Russell Currey
Alan Maguire
Amit Cohen
Mykola Lysenko
Geliang Tang
Nicolas Rybowski
Janis Schoetterl-Glausch
Steffen Eiden
Aaron Lewis
Jiapeng Chong
Anup Patel
Dan Williams
Greg Kroah-Hartman
Joachim Wiberg
David Gow
Danielle Ratson
Yosry Ahmed
Jane Chu
Gautam Menghani
Brendan Higgins
Daniel Latypov
Andre Przywara
Marc Zyngier
Paolo Abeni
Andrii Nakryiko
Waiman Long
David Vernet
Peter Xu
Niels Dossche
SeongJae Park
Alexei Starovoitov
Vladis Dronov
Phil Auld
Tiezhu Yang
Kees Cook
Kumar Kartikeya Dwivedi
Magnus Karlsson
Kui-Feng Lee
Jiri Olsa
Dmitrii Dolgov
Kaixi Fan
Takshak Chahande
Joel Savitz
Carlos Llamas
Rebecca Mckeever
Petr Machata
Nicolas Dichtel
Michael Ellerman
Kishen Maloor
Oliver Upton
Mat Martineau
Sargun Dhillon
Raghavendra Rao Ananta
Paul E. McKenney
Marc Kleine-Budde
Ido Schimmel
Tonghao Zhang
Jaehee Park
Yang Guang
Jann Horn
Michal Suchanek
Russ Weight
Axel Rasmussen
Gabriel Krisman Bertazi
Sidhartha Kumar
Alistair Popple
Roman Gushchin
Alistair Popple
ran jianping
Haowen Bai
Shaopeng Tan
Reinette Chatre
Yuanchu Xie
Karthik Alapati
Jiri Pirko
Matthew Wilcox (Oracle)
Takashi Iwai
Artem Savkov
Liu Jian
Ze Zhang
Like Xu
Alaa Mohamed
Athira Rajeev
Paul Menzel
David S. Miller
Yafang Shao
Maxim Mikityanskiy
Reiji Watanabe
Ilya Leoshkevich
Quentin Monnet
Willem de Bruijn
Nikolay Borisov
Nikolay Aleksandrov
David Woodhouse
Boris Ostrovsky
Yauheni Kaliuta
Eyal Birger
Nathan Chancellor
Naresh Kamboju
Mike Kravetz
Mike Rapoport
Aneesh Kumar K.V
Chang S. Bae
Muchun Song
Guillaume Tucker
Shakeel Butt
Vincent Chen
Namhyung Kim
Jakub Sitnicki
Guillaume Nault
Krasnov Arseniy Vladimirovich
Kuniyuki Iwashima
Delyan Kratunov
Hou Tao
David Ahern
Ingo Molnar
Victor Nogueira
Roberto Sassu
Matthieu Baerts
Karolina Drobnik
Tian Tao
Felix Maurer
Tadeusz Struk
Stefan Berger
KP Singh
Pratik R. Sampat
Ganesh Goudar
Alan Kao
Hao Luo
Chengming Zhou
David E. Box
Xu Kuohai
Kajol Jain
Roopa Prabhu
Mateusz Jończyk