Test iterators of vma, files and tasks.
Ensure the API works appropriately to visit all tasks,
tasks in a process, or a particular task.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20220926184957.208194-5-kuifeng@fb.com
Bits 27 through 31 in Hyper-V hypercall 'control' are reserved (see
HV_HYPERCALL_RSVD0_MASK) but '0xdeadbeef' includes them. This causes
KVM to return HV_STATUS_INVALID_HYPERCALL_INPUT instead of the expected
HV_STATUS_INVALID_HYPERCALL_CODE.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/all/87fsgjol20.fsf@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Load RAX with -EFAULT prior to making a Hyper-V hypercall so that tests
can't get false negatives due to the compiler coincidentally loading the
"right" value into RAX, i.e. to ensure that _KVM_ and not the compiler
is correctly clearing RAX on a successful hypercall.
Note, initializing *hv_status (in C code) to -EFAULT is not sufficient
to avoid false negatives, as the compiler can still "clobber" RAX and
thus load garbage into *hv_status if the hypercall faults (or if KVM
doesn't set RAX).
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220922062451.2927010-1-vipinsh@google.com
[sean: move to separate patch, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Commit cc5851c6be ("KVM: selftests: Use exception fixup for #UD/#GP
Hyper-V MSR/hcall tests") introduced a wrong guest assert in guest_hcall().
It is not checking the successful hypercall results and only checks the
result when a fault happens.
GUEST_ASSERT_2(!hcall->ud_expected || res == hcall->expect,
hcall->expect, res);
Correct the assertion by only checking results of the successful
hypercalls.
This issue was observed when this test started failing after building it
in Clang. Above guest assert statement fails because "res" is not equal
to "hcall->expect" when "hcall->ud_expected" is true. "res" gets some
garbage value in Clang from the RAX register. In GCC, RAX is 0 because
it using RAX for @output_address in the asm statement and resetting it
to 0 before using it as output operand in the same asm statement. Clang
is not using RAX for @output_address.
Fixes: cc5851c6be ("KVM: selftests: Use exception fixup for #UD/#GP Hyper-V MSR/hcall tests")
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220922062451.2927010-1-vipinsh@google.com
[sean: wrap changelog at ~75 chars, move -EFAULT change to separate patch]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix the comment to accurately describe the test and recently added
SYSTEM_SUSPEND test case.
What was once psci_cpu_on_test was renamed and extended to squeeze in a
test case for PSCI SYSTEM_SUSPEND. Nonetheless, the author of those
changes (whoever they may be...) failed to update the file comment to
reflect what had changed.
Reported-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220819162100.213854-1-oliver.upton@linux.dev
For PERF_SAMPLE_BRANCH_STACK sample type, different branch_sample_type,
ie branch filters are supported. The testcase "bhrb_filter_map_test"
tests the valid and invalid filter maps in different powerpc platforms.
Update this testcase to include scenario to cover multiple branch
filters at sametime. Since powerpc doesn't support multiple filters at
sametime, expect failure during perf_event_open.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921145255.20972-3-atrajeev@linux.vnet.ibm.com
Test 84a0: Create TEQL with default setting
Test 7734: Create TEQL with multiple device
Test 34a9: Delete TEQL with valid handle
Test 6289: Show TEQL stats
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 6430: Create TBF with default setting
Test 0518: Create TBF with mtu setting
Test 320a: Create TBF with peakrate setting
Test 239b: Create TBF with latency setting
Test c975: Create TBF with overhead setting
Test 948c: Create TBF with linklayer setting
Test 3549: Replace TBF with mtu
Test f948: Change TBF with latency time
Test 2348: Show TBF class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test ba39: Add taprio Qdisc to multi-queue device (8 queues)
Test 9462: Add taprio Qdisc with multiple sched-entry
Test 8d92: Add taprio Qdisc with txtime-delay
Test d092: Delete taprio Qdisc with valid handle
Test 8471: Show taprio class
Test 0a85: Add taprio Qdisc to single-queue device
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 283e: Create skbprio with default setting
Test c086: Create skbprio with limit setting
Test 6733: Change skbprio with limit setting
Test 2958: Show skbprio class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 7482: Create SFQ with default setting
Test c186: Create SFQ with limit setting
Test ae23: Create SFQ with perturb setting
Test a430: Create SFQ with quantum setting
Test 4539: Create SFQ with divisor setting
Test b089: Create SFQ with flows setting
Test 99a0: Create SFQ with depth setting
Test 7389: Create SFQ with headdrop setting
Test 6472: Create SFQ with redflowlimit setting
Test 8929: Show SFQ class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 3294: Create SFB with default setting
Test 430a: Create SFB with rehash setting
Test 3410: Create SFB with db setting
Test 49a0: Create SFB with limit setting
Test 1241: Create SFB with max setting
Test 3249: Create SFB with target setting
Test 30a9: Create SFB with increment setting
Test 239a: Create SFB with decrement setting
Test 9301: Create SFB with penalty_rate setting
Test 2a01: Create SFB with penalty_burst setting
Test 3209: Change SFB with rehash setting
Test 5447: Show SFB class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 3289: Create PLUG with default setting
Test 0917: Create PLUG with block setting
Test 483b: Create PLUG with release setting
Test 4995: Create PLUG with release_indefinite setting
Test 389c: Create PLUG with limit setting
Test 384a: Delete PLUG with valid handle
Test 439a: Replace PLUG with limit setting
Test 9831: Change PLUG with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 900c: Create pfifo_fast with default setting
Test 7470: Dump pfifo_fast stats
Test b974: Replace pfifo_fast with different handle
Test 3240: Delete pfifo_fast with valid handle
Test 4385: Delete pfifo_fast with invalid handle
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 4812: Create HHF with default setting
Test 8a92: Create HHF with limit setting
Test 3491: Create HHF with quantum setting
Test ba04: Create HHF with reset_timeout setting
Test 4238: Create HHF with admit_bytes setting
Test 839f: Create HHF with evict_timeout setting
Test a044: Create HHF with non_hh_weight setting
Test 32f9: Change HHF with limit setting
Test 385e: Show HHF class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 8942: Create GRED with default setting
Test 5783: Create GRED with grio setting
Test 8a09: Create GRED with limit setting
Test 48cb: Create GRED with ecn setting
Test 763a: Change GRED setting
Test 8309: Show GRED class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 983b: Create FQ with default setting
Test 38a1: Create FQ with limit packet setting
Test 0a18: Create FQ with flow_limit setting
Test 2390: Create FQ with quantum setting
Test 845b: Create FQ with initial_quantum setting
Test 9398: Create FQ with maxrate setting
Test 342c: Create FQ with nopacing setting
Test 6391: Create FQ with refill_delay setting
Test 238b: Create FQ with low_rate_threshold setting
Test 7582: Create FQ with orphan_mask setting
Test 4894: Create FQ with timer_slack setting
Test 324c: Create FQ with ce_threshold setting
Test 424a: Create FQ with horizon time setting
Test 89e1: Create FQ with horizon_cap setting
Test 32e1: Delete FQ with valid handle
Test 49b0: Replace FQ with limit setting
Test 9478: Change FQ with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 34ba: Create ETF with default setting
Test 438f: Create ETF with delta nanos setting
Test 9041: Create ETF with deadline_mode setting
Test 9a0c: Create ETF with skip_sock_check setting
Test 2093: Delete ETF with valid handle
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 983a: Create CODEL with default setting
Test 38aa: Create CODEL with limit packet setting
Test 9178: Create CODEL with target setting
Test 78d1: Create CODEL with interval setting
Test 238a: Create CODEL with ecn setting
Test 939c: Create CODEL with ce_threshold setting
Test 8380: Delete CODEL with valid handle
Test 289c: Replace CODEL with limit setting
Test 0648: Change CODEL with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 8937: Create CHOKE with default setting
Test 48c0: Create CHOKE with min packet setting
Test 38c1: Create CHOKE with max packet setting
Test 234a: Create CHOKE with ecn setting
Test 4380: Create CHOKE with burst setting
Test 48c7: Delete CHOKE with valid handle
Test 4398: Replace CHOKE with min setting
Test 0301: Change CHOKE with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 7628: Create ATM with default setting
Test 390a: Delete ATM with valid handle
Test 32a0: Show ATM class
Test 6310: Dump ATM stats
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the tests are run in a function $@ there actually contains the
function arguments, not the script ones.
Pass "$@" to the function as well.
Fixes: 272d1f4cfa ("selftests: bpf: test_kmod.sh: Pass parameters to the module")
Signed-off-by: Yauheni Kaliuta <ykaliuta@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220926092320.564631-1-ykaliuta@redhat.com
Skip selftests that require EPT support in the VM when it is not
available. For example, if running on a machine where kvm_intel.ept=N
since KVM does not offer EPT support to guests if EPT is not supported
on the host.
This commit causes vmx_dirty_log_test to be skipped instead of failing
on hosts where kvm_intel.ept=N.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220926171457.532542-1-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The socket 2 bind the addr in use, bind should fail with EADDRINUSE. So
if bind success or errno != EADDRINUSE, testcase should be failed.
Fixes: 3ca8e40299 ("soreuseport: BPF selection functional test")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1663916557-10730-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With CONFIG_X86_KERNEL_IBT enabled the test for kprobe with offset
won't work because of the extra endbr instruction.
As suggested by Andrii adding CONFIG_X86_KERNEL_IBT detection
and using appropriate offset value based on that.
Also removing test7 program, because it does the same as test6.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220926153340.1621984-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Changing return value of kprobe's version of bpf_get_func_ip
to return zero if the attach address is not on the function's
entry point.
For kprobes attached in the middle of the function we can't easily
get to the function address especially now with the CONFIG_X86_KERNEL_IBT
support.
If user cares about current IP for kprobes attached within the
function body, they can get it with PT_REGS_IP(ctx).
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220926153340.1621984-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martynas reported bpf_get_func_ip returning +4 address when
CONFIG_X86_KERNEL_IBT option is enabled.
When CONFIG_X86_KERNEL_IBT is enabled we'll have endbr instruction
at the function entry, which screws return value of bpf_get_func_ip()
helper that should return the function address.
There's short term workaround for kprobe_multi bpf program made by
Alexei [1], but we need this fixup also for bpf_get_attach_cookie,
that returns cookie based on the entry_ip value.
Moving the fixup in the fprobe handler, so both bpf_get_func_ip
and bpf_get_attach_cookie get expected function address when
CONFIG_X86_KERNEL_IBT option is enabled.
Also renaming kprobe_multi_link_handler entry_ip argument to fentry_ip
so it's clearer this is an ftrace __fentry__ ip.
[1] commit 7f0059b58f ("selftests/bpf: Fix kprobe_multi test.")
Cc: Peter Zijlstra <peterz@infradead.org>
Reported-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220926153340.1621984-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When mremap call results in expansion, it might be possible to merge the
VMA with the next VMA which might become adjacent. This patch adds
vma_merge call after the expansion is done to try and merge.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20220603145719.1012094-3-matenajakub@gmail.com
Signed-off-by: Jakub Matěna <matenajakub@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This is a test suite that uses the radix test infrastructure. It has been
split into its own commit to allow for easier review of the maple tree
code.
The testing includes:
- Allocation of nodes
- gfp flag allocation checks
- Expansion & contraction of tree
- preallocation checks
- tree navigation by next/prev
- tree navigation by iterators (mas_for_each, etc)
- Number of nodes for a given number of entries
- Generic tree construction tests
- Addition and removal of entries in forward and reverse numerical indexes
- gap searching both forward and reverse
- Combining gaps by overwriting entries in different ways
- splitting right-most node
- splitting left-most node
- overwriting multiple slots
- overwriting across different levels of the tree
- overwriting the middle of a tree
- causing a 3-way split up to the root by overwriting the last slot and
first slot of different nodes and spanning different levels
- RCU stress testing of the tree with threads
- Duplication of the tree by entry count
- Tests which were generated by fuzzers have been added.
- A large number of tests which come from recording crashing in a VM and
reconstructing the tree (see check_erase2_set())
Link: https://lkml.kernel.org/r/20220906194824.2110408-8-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
maple tree uses lockdep_is_held, so define it as external in the header.
Link: https://lkml.kernel.org/r/20220906194824.2110408-7-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add support for kmem_cache_free_bulk() and kmem_cache_alloc_bulk() to the
radix tree test suite.
Link: https://lkml.kernel.org/r/20220906194824.2110408-6-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add functions to get the number of allocations, and total allocations from
a kmem_cache. Also add a function to get the allocated size and a way to
zero the total allocations.
Link: https://lkml.kernel.org/r/20220906194824.2110408-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmem_cache_set_non_kernel() is a mechanism to allow a certain number of
kmem_cache_alloc requests to succeed even when GFP_KERNEL is not set in
the flags. This functionality allows for testing different paths though
the code.
Link: https://lkml.kernel.org/r/20220906194824.2110408-4-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Introducing the Maple Tree"
The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently. There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface. If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.
The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes. With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses. The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.
The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The
long term goal is to reduce or remove the mmap_lock contention.
The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers. A single write operation will be
allowed at a time. A reader re-walks if stale data is encountered. VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.
Davidlor said
: Yes I like the maple tree, and at this stage I don't think we can ask for
: more from this series wrt the MM - albeit there seems to still be some
: folks reporting breakage. Fundamentally I see Liam's work to (re)move
: complexity out of the MM (not to say that the actual maple tree is not
: complex) by consolidating the three complimentary data structures very
: much worth it considering performance does not take a hit. This was very
: much a turn off with the range locking approach, which worst case scenario
: incurred in prohibitive overhead. Also as Liam and Matthew have
: mentioned, RCU opens up a lot of nice performance opportunities, and in
: addition academia[1] has shown outstanding scalability of address spaces
: with the foundation of replacing the locked rbtree with RCU aware trees.
A similar work has been discovered in the academic press
https://pdos.csail.mit.edu/papers/rcuvm:asplos12.pdf
Sheer coincidence. We designed our tree with the intention of solving the
hardest problem first. Upon settling on a b-tree variant and a rough
outline, we researched ranged based b-trees and RCU b-trees and did find
that article. So it was nice to find reassurances that we were on the
right path, but our design choice of using ranges made that paper unusable
for us.
This patch (of 70):
The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently. There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface. If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.
The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes. With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses. The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.
The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The
long term goal is to reduce or remove the mmap_lock contention.
The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers. A single write operation will be
allowed at a time. A reader re-walks if stale data is encountered. VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.
There is additional BUG_ON() calls added within the tree, most of which
are in debug code. These will be replaced with a WARN_ON() call in the
future. There is also additional BUG_ON() calls within the code which
will also be reduced in number at a later date. These exist to catch
things such as out-of-range accesses which would crash anyways.
Link: https://lkml.kernel.org/r/20220906194824.2110408-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20220906194824.2110408-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We can make the phc2sys helper not only synchronize a PHC to
CLOCK_REALTIME, which is what it currently does, but also CLOCK_REALTIME
to a PHC, which is going to be needed in distributed TSN tests.
Instead of making the complexity of the arguments passed to
phc2sys_start() explode, we can let it figure out the sync direction
automatically, based on ptp4l's port states.
Towards that goal, pass just the path to the desired ptp4l instance's
UNIX domain socket, and remove the $if_name argument (from which it
derives the PHC). Also adapt the one caller from the ocelot psfp.sh
test. In the case of psfp.sh, phc2sys_start is able to properly figure
out that CLOCK_REALTIME is the source clock and swp1's PHC is the
destination, because of the way in which ptp4l_start for the
UDS_ADDRESS_SWP1 was called: with slave_only=false, so it will always
win the BMCA and always become the sync master between itself and $h1.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the PID variable for the isochron receiver into a separate
namespace per stats port, to allow multiple receivers (and/or
orchestration daemons) to be instantiated by the same script.
Preserve the existing behavior by making isochron_do() use the default
stats TCP port of 5000.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch ports will want to act as Boundary Clocks, which are configured
using ptp4l by specifying the "-i" argument multiple times.
Since we track a log file and a pid file for each ptp4l instance, and we
want to be compatible with the existing single-port callers of
ptp4l_start and ptp4l_stop, pass the interface list as a single string
of space-separated values. Based on this, we create a label for each
ptp4l instance, where the spaces are replaced with underscores
(ptp4l_start "eth0 eth1" generates "ptp4l_pid_eth0_eth1").
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The extra_args argument ($3) of isochron_recv_start is overwritten with
uds ($2), if that argument exists.
This is currently not a problem, because the only TSN selftest
(ocelot/psfp.sh) omits remote sync so it does not specify to the
receiver a UNIX domain socket for ptp4l. So $uds is currently an empty
string.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a syntax error test case for eprobe as same as kprobes.
Link: https://lkml.kernel.org/r/165932115471.2850673.8014722990775242727.stgit@devnote2
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a test to verify that KVM_{G,S}ET_EVENTS play nice with pending vs.
injected exceptions when an exception is being queued for L2, and that
KVM correctly handles L1's exception intercept wants.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-27-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include the vmx.h and svm.h uapi headers that KVM so kindly provides
instead of manually defining all the same exit reasons/code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-26-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The updated Enlightened VMCS definition has 'encls_exiting_bitmap'
field which needs mapping to VMCS, add the missing encoding.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220830133737.1539624-13-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Require KVM_CAP_VM_DISABLE_NX_HUGE_PAGES for the entire NX hugepage test
instead of skipping the "disable" subtest if the capability isn't
supported by the host kernel. While the "enable" subtest does provide
value when the capability isn't supported, silently providing only half
the promised coveraged is undesirable, i.e. it's better to skip the test
so that the user knows something.
Alternatively, the test could print something to alert the user instead
of silently skipping the subtest, but that would encourage other tests
to follow suit, and it's not clear that it's desirable to take selftests
in that direction. And if selftests do head down the path of skipping
subtests, such behavior needs first-class support in the framework.
Opportunistically convert other test preconditions to TEST_REQUIRE().
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20220812175301.3915004-1-oliver.upton@linux.dev
[sean: rewrote changelog to capture discussion about skipping the test]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add one test for wait redirect sock's send memory test for sockmap.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220823133755.314697-3-liujian56@huawei.com
- Fix a infinite loop bug in fsdax
- Fix memory-type detection for devdax (EINJ regression)
- Small cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYy+skgAKCRDfioYZHlFs
Zxw3AQCVDbuMh2wBUSJP4G4XF+ZHM+FntpUmawcmUFsEjt0fGQEA9NCjOoj7jLlP
BrI1OtbskTLAMzJeRI3qY3irV4iHsAI=
=28T9
-----END PGP SIGNATURE-----
Merge tag 'dax-and-nvdimm-fixes-v6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull NVDIMM and DAX fixes from Dan Williams:
"A recently discovered one-line fix for devdax that further addresses a
v5.5 regression, and (a bit embarrassing) a small batch of fixes that
have been sitting in my fixes tree for weeks.
The older fixes have soaked in linux-next during that time and address
an fsdax infinite loop and some other minor fixups.
- Fix a infinite loop bug in fsdax
- Fix memory-type detection for devdax (EINJ regression)
- Small cleanups"
* tag 'dax-and-nvdimm-fixes-v6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
devdax: Fix soft-reservation memory description
fsdax: Fix infinite loop in dax_iomap_rw()
nvdimm/namespace: drop nested variable in create_namespace_pmem()
ndtest: Cleanup all of blk namespace specific code
pmem: fix a name collision
Add -l (--log-level) flag to override default BPF verifier log lever.
This only matters in verbose mode, which is the mode in which veristat
emits verifier log for each processed BPF program.
This is important because for successfully verified BPF programs
log_level 1 is empty, as BPF verifier truncates all the successfully
verified paths. So -l2 is the only way to actually get BPF verifier log
in practice. It looks sometihng like this:
[vmuser@archvm bpf]$ sudo ./veristat xdp_tx.bpf.o -vl2
Processing 'xdp_tx.bpf.o'...
PROCESSING xdp_tx.bpf.o/xdp_tx, DURATION US: 19, VERDICT: success, VERIFIER LOG:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
; return XDP_TX;
0: (b4) w0 = 3 ; R0_w=3
1: (95) exit
verification time 19 usec
stack depth 0
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
File Program Verdict Duration (us) Total insns Total states Peak states
------------ ------- ------- ------------- ----------- ------------ -----------
xdp_tx.bpf.o xdp_tx success 19 2 0 0
------------ ------- ------- ------------- ----------- ------------ -----------
Done. Processed 1 files, 0 programs. Skipped 1 files, 0 programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923175913.3272430-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Emit "Processing <filepath>..." for each BPF object file to be
processed, to show progress. But also add -q (--quiet) flag to silence
such messages. Doing something more clever (like overwriting same output
line) is to cumbersome and easily breakable if there is any other
console output (e.g., errors from libbpf).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923175913.3272430-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make veristat ignore non-BPF object files. This allows simpler
mass-verification (e.g., `sudo ./veristat *.bpf.o` in selftests/bpf
directory). Note that `sudo ./veristat *.o` would also work, but with
selftests's multiple copies of BPF object files (.bpf.o and
.bpf.linked{1,2,3}.o) it's 4x slower.
Also, given some of BPF object files could be incomplete in the sense
that they are meant to be statically linked into final BPF object file
(like linked_maps, linked_funcs, linked_vars), note such instances in
stderr, but proceed anyways. This seems like a better trade off between
completely silently ignoring BPF object file and aborting
mass-verification altogether.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923175913.3272430-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make sure veristat doesn't spend ridiculous amount of time parsing
verifier stats from verifier log, especially for very large logs or
truncated logs (e.g., when verifier returns -ENOSPC due to too small
buffer). For this, parse lines from the end of the log and make sure we
parse only up to 100 last lines, where stats should be, if at all.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923175913.3272430-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The cgroup_hierarchical_stats selftest is complicated. It has to be,
because it tests an entire workflow of recording, aggregating, and
dumping cgroup stats. However, some of the complexity is unnecessary.
The test now enables the memory controller in a cgroup hierarchy, invokes
reclaim, measure reclaim time, THEN uses that reclaim time to test the
stats collection and aggregation. We don't need to use such a
complicated stat, as the context in which the stat is collected is
orthogonal.
Simplify the test by using a simple stat instead of reclaim time, the
total number of times a process has ever entered a cgroup. This makes
the test simpler and removes the dependency on the memory controller and
the memory reclaim interface.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20220919175330.890793-1-yosryahmed@google.com
It's not currently possible but in the future we may get
IORING_CQE_F_MORE and so a notification even for a failed request, i.e.
when cqe->res <= 0. That's precisely what the documentation says, so
adjust the test and do IORING_CQE_F_MORE checks regardless of the main
completion cqe->res.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/aac948ea753a8bfe1fa3b82fe45debcb54586369.1663953085.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
for-6.0 has the following fix for cgroup_get_from_id().
836ac87d ("cgroup: fix cgroup_get_from_id")
which conflicts with the following two commits in for-6.1.
4534dee9 ("cgroup: cgroup: Honor caller's cgroup NS when resolving cgroup id")
fa7e439c ("cgroup: Homogenize cgroup_get_from_id() return value")
While the resolution is straightforward, the code ends up pretty ugly
afterwards. Let's pull for-6.0-fixes into for-6.1 so that the code can be
fixed up there.
Signed-off-by: Tejun Heo <tj@kernel.org>
* Fix for kmemleak with pKVM
s390:
* Fixes for VFIO with zPCI
* smatch fix
x86:
* Ensure XSAVE-capable hosts always allow FP and SSE state to be saved
and restored via KVM_{GET,SET}_XSAVE
* Fix broken max_mmu_rmap_size stat
* Fix compile error with old glibc that doesn't have gettid()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmMtvg4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNy2Af/VybWK2uAbaMkV6irQ1YTJIrRPco1
C+JQdiQklYbjzThfPWNF/MiH+VTObloR1KqztOeQbfcrgwzygO68D3bs0wkAukLA
mtdcMjdsqNx8r9u533i6S8Dpo0RkHKl+I8+3mHdPHTzlrbCuYJFFFxFNLhE+xbrK
DP2Gl/xXIGYwOv2nfHA/xxI7TRICv4IxmzQazxlmC27n6BLNSr8qp6jI9lXJQfJ8
XJh3SbmRux3/cs2oEqONg8DySJh631kI1jGGOmL3qk07ZR7A5KZ+lju0xM7vQIEq
aR25YNYZux+BPIY/WxT1R0j6pwinBmFp8OoQYCs8DaQ65fdE5gegtJRpow==
=VADm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"As everyone back came back from conferences, here are the pending
patches for Linux 6.0.
ARM:
- Fix for kmemleak with pKVM
s390:
- Fixes for VFIO with zPCI
- smatch fix
x86:
- Ensure XSAVE-capable hosts always allow FP and SSE state to be
saved and restored via KVM_{GET,SET}_XSAVE
- Fix broken max_mmu_rmap_size stat
- Fix compile error with old glibc that doesn't have gettid()"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Inject #UD on emulated XSETBV if XSAVES isn't enabled
KVM: x86: Always enable legacy FP/SSE in allowed user XFEATURES
KVM: x86: Reinstate kvm_vcpu_arch.guest_supported_xcr0
KVM: x86/mmu: add missing update to max_mmu_rmap_size
selftests: kvm: Fix a compile error in selftests/kvm/rseq_test.c
KVM: s390: pci: register pci hooks without interpretation
KVM: s390: pci: fix GAIT physical vs virtual pointers usage
KVM: s390: Pass initialized arg even if unused
KVM: s390: pci: fix plain integer as NULL pointer warnings
KVM: arm64: Use kmemleak_free_part_phys() to unregister hyp_mem_base
Fix for a code analyser warning
-----BEGIN PGP SIGNATURE-----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=Z7gl
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-6.0-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
More pci fixes
Fix for a code analyser warning
It looks like this test has been accidentally dropped when resolving
conflicts in this Makefile.
Most probably because there were 3 different patches modifying this file
in parallel:
commit 152e8ec776 ("selftests/bonding: add a test for bonding lladdr target")
commit bbb774d921 ("net: Add tests for bonding and team address list management")
commit 2ffd57327f ("selftests: bonding: cause oops in bond_rr_gen_slave_id")
The first one was applied in 'net-next' while the two other ones were
recently applied in the 'net' tree.
But that's alright, easy to fix by re-adding the missing one!
Fixes: 0140a7168f ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20220923082306.2468081-1-matthieu.baerts@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The livepatch kselftests rely on comparing expected and actual output
from such commands as sysctl. A recent commit in procps-ng v4.0.0 [1]
changed sysctl's output to emit key pathnames like:
sysctl: setting key "/proc/sys/kernel/ftrace_enabled": Device or resource busy
versus previous dotted output:
sysctl: setting key "kernel.ftrace_enabled": Device or resource busy
The modification in output was later reverted [2], but since the change
has been tagged in procps-ng v4.0.0, update the livepatch kselftest to
handle either case.
[1] 6389deca5b
[2] b159c198c9
Reported-by: Dennis(Zhuoheng) Li <denli@redhat.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220811212138.182575-1-joe.lawrence@redhat.com
Test 290a: Show RED class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 2410: Show prio class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 1023: Show mq class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 0521: Show ingress class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 0582: Create QFQ with default setting
Test c9a3: Create QFQ with class weight setting
Test 8452: Create QFQ with class maxpkt setting
Test d920: Create QFQ with multiple class setting
Test 0548: Delete QFQ with handle
Test 5901: Show QFQ class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test cb28: Create NETEM with default setting
Test a089: Create NETEM with limit flag
Test 3449: Create NETEM with delay time
Test 3782: Create NETEM with distribution and corrupt flag
Test 2b82: Create NETEM with distribution and duplicate flag
Test a932: Create NETEM with distribution and loss flag
Test e01a: Create NETEM with distribution and loss state flag
Test ba29: Create NETEM with loss gemodel flag
Test 0492: Create NETEM with reorder flag
Test 7862: Create NETEM with rate limit
Test 7235: Create NETEM with multiple slot rate
Test 5439: Create NETEM with multiple slot setting
Test 5029: Change NETEM with loss state
Test 3785: Replace NETEM with delay time
Test 4502: Delete NETEM with handle
Test 0785: Show NETEM class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 20ba: Add multiq Qdisc to multi-queue device (8 queues)
Test 4301: List multiq Class
Test 7832: Delete nonexistent multiq Qdisc
Test 2891: Delete multiq Qdisc twice
Test 1329: Add multiq Qdisc to single-queue device
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 9903: Add mqprio Qdisc to multi-queue device (8 queues)
Test 453a: Delete nonexistent mqprio Qdisc
Test 5292: Delete mqprio Qdisc twice
Test 45a9: Add mqprio Qdisc to single-queue device
Test 2ba9: Show mqprio class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 0904: Create HTB with default setting
Test 3906: Create HTB with default-N setting
Test 8492: Create HTB with r2q setting
Test 9502: Create HTB with direct_qlen setting
Test b924: Create HTB with class rate and burst setting
Test 4359: Create HTB with class mpu setting
Test 9048: Create HTB with class prio setting
Test 4994: Create HTB with class ceil setting
Test 9523: Create HTB with class cburst setting
Test 5353: Create HTB with class mtu setting
Test 346a: Create HTB with class quantum setting
Test 303a: Delete HTB with handle
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 3254: Create HFSC with default setting
Test 0289: Create HFSC with class sc and ul rate setting
Test 846a: Create HFSC with class sc umax and dmax setting
Test 5413: Create HFSC with class rt and ls rate setting
Test 9312: Create HFSC with class rt umax and dmax setting
Test 6931: Delete HFSC with handle
Test 8436: Show HFSC class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 4957: Create FQ_CODEL with default setting
Test 7621: Create FQ_CODEL with limit setting
Test 6871: Create FQ_CODEL with memory_limit setting
Test 5636: Create FQ_CODEL with target setting
Test 630a: Create FQ_CODEL with interval setting
Test 4324: Create FQ_CODEL with quantum setting
Test b190: Create FQ_CODEL with noecn flag
Test 5381: Create FQ_CODEL with ce_threshold setting
Test c9d2: Create FQ_CODEL with drop_batch setting
Test 523b: Create FQ_CODEL with multiple setting
Test 9283: Replace FQ_CODEL with noecn setting
Test 3459: Change FQ_CODEL with limit setting
Test 0128: Delete FQ_CODEL with handle
Test 0435: Show FQ_CODEL class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 6345: Create DSMARK with default setting
Test 3462: Create DSMARK with default_index setting
Test ca95: Create DSMARK with set_tc_index flag
Test a950: Create DSMARK with multiple setting
Test 4092: Delete DSMARK with handle
Test 5930: Show DSMARK class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 0385: Create DRR with default setting
Test 2375: Delete DRR with handle
Test 3092: Show DRR class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 1820: Create CBS with default setting
Test 1532: Create CBS with hicredit setting
Test 2078: Create CBS with locredit setting
Test 9271: Create CBS with sendslope setting
Test 0482: Create CBS with idleslope setting
Test e8f3: Create CBS with multiple setting
Test 23c9: Replace CBS with sendslope setting
Test a07a: Change CBS with idleslope setting
Test 43b3: Delete CBS with handle
Test 9472: Show CBS class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 3460: Create CBQ with default setting
Test 0592: Create CBQ with mpu
Test 4684: Create CBQ with valid cell num
Test 4345: Create CBQ with invalid cell num
Test 4525: Create CBQ with valid ewma
Test 6784: Create CBQ with invalid ewma
Test 5468: Delete CBQ with handle
Test 492a: Show CBQ class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 1212: Create CAKE with default setting
Test 3281: Create CAKE with bandwidth limit
Test c940: Create CAKE with autorate-ingress flag
Test 2310: Create CAKE with rtt time
Test 2385: Create CAKE with besteffort flag
Test a032: Create CAKE with diffserv8 flag
Test 2349: Create CAKE with diffserv4 flag
Test 8472: Create CAKE with flowblind flag
Test 2341: Create CAKE with dsthost and nat flag
Test 5134: Create CAKE with wash flag
Test 2302: Create CAKE with flowblind and no-split-gso flag
Test 0768: Create CAKE with dual-srchost and ack-filter flag
Test 0238: Create CAKE with dual-dsthost and ack-filter-aggressive flag
Test 6572: Create CAKE with memlimit and ptm flag
Test 2436: Create CAKE with fwmark and atm flag
Test 3984: Create CAKE with overhead and mpu
Test 5421: Create CAKE with conservative and ingress flag
Test 6854: Delete CAKE with conservative and ingress flag
Test 2342: Replace CAKE with mpu
Test 2313: Change CAKE with mpu
Test 4365: Show CAKE class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Free the created fd or allocated bpf_object after test case succeeds,
else there will be resource leaks.
Spotted by using address sanitizer and checking the content of
/proc/$pid/fd directory.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220921070035.2016413-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Destroy the created skeleton when CONFIG_PREEMPT is off, else will be
resource leak.
Fixes: 73b97bc78b ("selftests/bpf: Test concurrent updates on bpf_task_storage_busy")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220921070035.2016413-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The following warning appears when executing:
make -C tools/testing/selftests/kvm
rseq_test.c: In function ‘main’:
rseq_test.c:237:33: warning: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Wimplicit-function-declaration]
(void *)(unsigned long)gettid());
^~~~~~
getgid
/usr/bin/ld: /tmp/ccr5mMko.o: in function `main':
../kvm/tools/testing/selftests/kvm/rseq_test.c:237: undefined reference to `gettid'
collect2: error: ld returned 1 exit status
make: *** [../lib.mk:173: ../kvm/tools/testing/selftests/kvm/rseq_test] Error 1
Use the more compatible syscall(SYS_gettid) instead of gettid() to fix it.
More subsequent reuse may cause it to be wrapped in a lib file.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220802071240.84626-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Added urandom_read shared lib is missing from the list of installed
files what makes urandom_read test after `make install` or `make
gen_tar` broken.
Add the library to TEST_GEN_FILES. The names in the list do not
contain $(OUTPUT) since it's added by lib.mk code.
Fixes: 00a0fa2d7d ("selftests/bpf: Add urandom_read shared lib and USDTs")
Signed-off-by: Yauheni Kaliuta <ykaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220920161409.129953-1-ykaliuta@redhat.com
We use a local variable hwcap to refer to the element of the hwcaps array
which we are currently checking. When checking for the relevant hwcap bit
being set in testing we were dereferencing hwcaps rather than hwcap in
fetching the AT_HWCAP to use, which is perfectly valid C but means we were
always checking the bit was set in the hwcap for whichever feature is first
in the array. Remove the stray s.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220907113400.12982-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
A handful of awaited fixes here - revert of the FEC changes,
bluetooth fix, fixes for iwlwifi spew.
We added a warning in PHY/MDIO code which is triggering on
a couple of platforms in a false-positive-ish way. If we can't
iron that out over the week we'll drop it and re-add for 6.1.
I've added a new "follow up fixes" section for fixes to fixes
in 6.0-rcs but it may actually give the false impression that
those are problematic or that more testing time would have
caught them. So likely a one time thing.
Follow up fixes:
- nf_tables_addchain: fix nft_counters_enabled underflow
- ebtables: fix memory leak when blob is malformed
- nf_ct_ftp: fix deadlock when nat rewrite is needed
Current release - regressions:
- Revert "fec: Restart PPS after link state change"
- Revert "net: fec: Use a spinlock to guard `fep->ptp_clk_on`"
- Bluetooth: fix HCIGETDEVINFO regression
- wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
- mptcp: fix fwd memory accounting on coalesce
- rwlock removal fall out:
- ipmr: always call ip{,6}_mr_forward() from RCU read-side
critical section
- ipv6: fix crash when IPv6 is administratively disabled
- tcp: read multiple skbs in tcp_read_skb()
- mdio_bus_phy_resume state warning fallout:
- eth: ravb: fix PHY state warning splat during system resume
- eth: sh_eth: fix PHY state warning splat during system resume
Current release - new code bugs:
- wifi: iwlwifi: don't spam logs with NSS>2 messages
- eth: mtk_eth_soc: enable XDP support just for MT7986 SoC
Previous releases - regressions:
- bonding: fix NULL deref in bond_rr_gen_slave_id
- wifi: iwlwifi: mark IWLMEI as broken
Previous releases - always broken:
- nf_conntrack helpers:
- irc: tighten matching on DCC message
- sip: fix ct_sip_walk_headers
- osf: fix possible bogus match in nf_osf_find()
- ipvlan: fix out-of-bound bugs caused by unset skb->mac_header
- core: fix flow symmetric hash
- bonding, team: unsync device addresses on ndo_stop
- phy: micrel: fix shared interrupt on LAN8814
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=wrep
-----END PGP SIGNATURE-----
Merge tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wifi, netfilter and can.
A handful of awaited fixes here - revert of the FEC changes, bluetooth
fix, fixes for iwlwifi spew.
We added a warning in PHY/MDIO code which is triggering on a couple of
platforms in a false-positive-ish way. If we can't iron that out over
the week we'll drop it and re-add for 6.1.
I've added a new "follow up fixes" section for fixes to fixes in
6.0-rcs but it may actually give the false impression that those are
problematic or that more testing time would have caught them. So
likely a one time thing.
Follow up fixes:
- nf_tables_addchain: fix nft_counters_enabled underflow
- ebtables: fix memory leak when blob is malformed
- nf_ct_ftp: fix deadlock when nat rewrite is needed
Current release - regressions:
- Revert "fec: Restart PPS after link state change" and the related
"net: fec: Use a spinlock to guard `fep->ptp_clk_on`"
- Bluetooth: fix HCIGETDEVINFO regression
- wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
- mptcp: fix fwd memory accounting on coalesce
- rwlock removal fall out:
- ipmr: always call ip{,6}_mr_forward() from RCU read-side
critical section
- ipv6: fix crash when IPv6 is administratively disabled
- tcp: read multiple skbs in tcp_read_skb()
- mdio_bus_phy_resume state warning fallout:
- eth: ravb: fix PHY state warning splat during system resume
- eth: sh_eth: fix PHY state warning splat during system resume
Current release - new code bugs:
- wifi: iwlwifi: don't spam logs with NSS>2 messages
- eth: mtk_eth_soc: enable XDP support just for MT7986 SoC
Previous releases - regressions:
- bonding: fix NULL deref in bond_rr_gen_slave_id
- wifi: iwlwifi: mark IWLMEI as broken
Previous releases - always broken:
- nf_conntrack helpers:
- irc: tighten matching on DCC message
- sip: fix ct_sip_walk_headers
- osf: fix possible bogus match in nf_osf_find()
- ipvlan: fix out-of-bound bugs caused by unset skb->mac_header
- core: fix flow symmetric hash
- bonding, team: unsync device addresses on ndo_stop
- phy: micrel: fix shared interrupt on LAN8814"
* tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
selftests: forwarding: add shebang for sch_red.sh
bnxt: prevent skb UAF after handing over to PTP worker
net: marvell: Fix refcounting bugs in prestera_port_sfp_bind()
net: sched: fix possible refcount leak in tc_new_tfilter()
net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD
udp: Use WARN_ON_ONCE() in udp_read_skb()
selftests: bonding: cause oops in bond_rr_gen_slave_id
bonding: fix NULL deref in bond_rr_gen_slave_id
net: phy: micrel: fix shared interrupt on LAN8814
net/smc: Stop the CLC flow if no link to map buffers on
ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficient
net: atlantic: fix potential memory leak in aq_ndev_close()
can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported
can: gs_usb: gs_can_open(): fix race dev->can.state condition
can: flexcan: flexcan_mailbox_read() fix return value for drop = true
net: sh_eth: Fix PHY state warning splat during system resume
net: ravb: Fix PHY state warning splat during system resume
netfilter: nf_ct_ftp: fix deadlock when nat rewrite is needed
netfilter: ebtables: fix memory leak when blob is malformed
netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain()
...
RHEL/Fedora RPM build checks are stricter, and complain when executable
files don't have a shebang line, e.g.
*** WARNING: ./kselftests/net/forwarding/sch_red.sh is executable but has no shebang, removing executable bit
Fix it by adding shebang line.
Fixes: 6cf0291f95 ("selftests: forwarding: Add a RED test for SW datapath")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220922024453.437757-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This bonding selftest used to cause a kernel oops on aarch64
and should be architectures agnostic.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add -f (--filter) argument which accepts glob-based filters for
narrowing down what BPF object files and programs within them should be
processed by veristat. This filtering applies both to comparison and
main (verification) mode.
Filter can be of two forms:
- file (object) filter: 'strobemeta*'; in this case all the programs
within matching files are implicitly allowed (or denied, depending
if it's positive or negative rule, see below);
- file and prog filter: 'strobemeta*/*unroll*' will further filter
programs within matching files to only allow those program names that
match '*unroll*' glob.
As mentioned, filters can be positive (allowlisting) and negative
(denylisting). Negative filters should start with '!': '!strobemeta*'
will deny any filename which basename starts with "strobemeta".
Further, one extra special syntax is supported to allow more convenient
use in practice. Instead of specifying rule on the command line,
veristat allows to specify file that contains rules, both positive and
negative, one line per one filter. This is achieved with -f @<filepath>
use, where <filepath> points to a text file containing rules (negative
and positive rules can be mixed). For convenience empty lines and lines
starting with '#' are ignored. This feature is useful to have some
pre-canned list of object files and program names that are tested
repeatedly, allowing to check in a list of rules and quickly specify
them on the command line.
As a demonstration (and a short cut for nearest future), create a small
list of "interesting" BPF object files from selftests/bpf and commit it
as veristat.cfg. It currently includes 73 programs, most of which are
the most complex and largest BPF programs in selftests, as judged by
total verified instruction count and verifier states total.
If there is overlap between positive or negative filters, negative
filter takes precedence (denylisting is stronger than allowlisting). If
no allow filter is specified, veristat implicitly assumes '*/*' rule. If
no deny rule is specified, veristat (logically) assumes no negative
filters.
Also note that -f (just like -e and -s) can be specified multiple times
and their effect is cumulative.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220921164254.3630690-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add ability to compare and contrast two veristat runs, previously
recorded with veristat using CSV output format.
When veristat is called with -C (--compare) flag, veristat expects
exactly two input files specified, both should be in CSV format.
Expectation is that it's output from previous veristat runs, but as long
as column names and formats match, it should just work. First CSV file
is designated as a "baseline" provided, and the second one is
comparison (experiment) data set. Establishing baseline matters later
when calculating difference percentages, see below.
Veristat parses these two CSV files and "reconstructs" verifier stats
(it could be just a subset of all possible stats). File and program
names are mandatory as they are used as joining key (these two "stats"
are designated as "key stats" in the code).
Veristat currently enforces that the set of stats recorded in both CSV
has to exactly match, down to exact order. This is just a simplifying
condition which can be lifted with a bit of additional pre-processing to
reorded stat specs internally, which I didn't bother doing, yet.
For all the non-key stats, veristat will output three columns: one for
baseline data, one for comparison data, and one with an absolute and
relative percentage difference. If either baseline or comparison values
are missing (that is, respective CSV file doesn't have a row with
*exactly* matching file and program name), those values are assumed to
be empty or zero. In such case relative percentages are forced to +100%
or -100% output, for consistency with a typical case.
Veristat's -e (--emit) and -s (--sort) specs still apply, so even if CSV
contains lots of stats, user can request to compare only a subset of
them (and specify desired column order as well). Similarly, both CSV and
human-readable table output is honored. Note that input is currently
always expected to be CSV.
Here's an example shell session, recording data for biosnoop tool on two
different kernels and comparing them afterwards, outputting data in table
format.
# on slightly older production kernel
$ sudo ./veristat biosnoop_bpf.o
File Program Verdict Duration (us) Total insns Total states Peak states
-------------- ------------------------ ------- ------------- ----------- ------------ -----------
biosnoop_bpf.o blk_account_io_merge_bio success 37 24 1 1
biosnoop_bpf.o blk_account_io_start failure 0 0 0 0
biosnoop_bpf.o block_rq_complete success 76 104 6 6
biosnoop_bpf.o block_rq_insert success 83 85 7 7
biosnoop_bpf.o block_rq_issue success 79 85 7 7
-------------- ------------------------ ------- ------------- ----------- ------------ -----------
Done. Processed 1 object files, 5 programs.
$ sudo ./veristat ~/local/tmp/fbcode-bpf-objs/biosnoop_bpf.o -o csv > baseline.csv
$ cat baseline.csv
file_name,prog_name,verdict,duration,total_insns,total_states,peak_states
biosnoop_bpf.o,blk_account_io_merge_bio,success,36,24,1,1
biosnoop_bpf.o,blk_account_io_start,failure,0,0,0,0
biosnoop_bpf.o,block_rq_complete,success,82,104,6,6
biosnoop_bpf.o,block_rq_insert,success,78,85,7,7
biosnoop_bpf.o,block_rq_issue,success,74,85,7,7
# on latest bpf-next kernel
$ sudo ./veristat biosnoop_bpf.o
File Program Verdict Duration (us) Total insns Total states Peak states
-------------- ------------------------ ------- ------------- ----------- ------------ -----------
biosnoop_bpf.o blk_account_io_merge_bio success 31 24 1 1
biosnoop_bpf.o blk_account_io_start failure 0 0 0 0
biosnoop_bpf.o block_rq_complete success 76 104 6 6
biosnoop_bpf.o block_rq_insert success 83 91 7 7
biosnoop_bpf.o block_rq_issue success 74 91 7 7
-------------- ------------------------ ------- ------------- ----------- ------------ -----------
Done. Processed 1 object files, 5 programs.
$ sudo ./veristat biosnoop_bpf.o -o csv > comparison.csv
$ cat comparison.csv
file_name,prog_name,verdict,duration,total_insns,total_states,peak_states
biosnoop_bpf.o,blk_account_io_merge_bio,success,71,24,1,1
biosnoop_bpf.o,blk_account_io_start,failure,0,0,0,0
biosnoop_bpf.o,block_rq_complete,success,82,104,6,6
biosnoop_bpf.o,block_rq_insert,success,83,91,7,7
biosnoop_bpf.o,block_rq_issue,success,87,91,7,7
# now let's compare with human-readable output (note that no sudo needed)
# we also ignore verification duration in this case to shortned output
$ ./veristat -C baseline.csv comparison.csv -e file,prog,verdict,insns
File Program Verdict (A) Verdict (B) Verdict (DIFF) Total insns (A) Total insns (B) Total insns (DIFF)
-------------- ------------------------ ----------- ----------- -------------- --------------- --------------- ------------------
biosnoop_bpf.o blk_account_io_merge_bio success success MATCH 24 24 +0 (+0.00%)
biosnoop_bpf.o blk_account_io_start failure failure MATCH 0 0 +0 (+100.00%)
biosnoop_bpf.o block_rq_complete success success MATCH 104 104 +0 (+0.00%)
biosnoop_bpf.o block_rq_insert success success MATCH 91 85 -6 (-6.59%)
biosnoop_bpf.o block_rq_issue success success MATCH 91 85 -6 (-6.59%)
-------------- ------------------------ ----------- ----------- -------------- --------------- --------------- ------------------
While not particularly exciting example (it turned out to be kind of hard to
quickly find a nice example with significant difference just because of kernel
version bump), it should demonstrate main features.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220921164254.3630690-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Teach veristat to output results as CSV table for easier programmatic
processing. Change what was --output/-o argument to now be --emit/-e.
And then use --output-format/-o <fmt> to specify output format.
Currently "table" and "csv" is supported, table being default.
For CSV output mode veristat is using spec identifiers as column names.
E.g., instead of "Total states" veristat uses "total_states" as a CSV
header name.
Internally veristat recognizes three formats, one of them
(RESFMT_TABLE_CALCLEN) is a special format instructing veristat to
calculate column widths for table output. This felt a bit cleaner and
more uniform than either creating separate functions just for this.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220921164254.3630690-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_object__close(obj) is called twice for BPF object files with single
BPF program in it. This causes crash. Fix this by not calling
bpf_object__close() unnecessarily.
Fixes: c8bc5e0509 ("selftests/bpf: Add veristat tool for mass-verifying BPF object files")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220921164254.3630690-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests to ensure that only supported dynamic pointer types are accepted,
that the passed argument is actually a dynamic pointer, that the passed
argument is a pointer to the stack, and that bpf_verify_pkcs7_signature()
correctly handles dynamic pointers with data set to NULL.
The tests are currently in the deny list for s390x (JIT does not support
calling kernel function).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220920075951.929132-14-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Perform several tests to ensure the correct implementation of the
bpf_verify_pkcs7_signature() kfunc.
Do the tests with data signed with a generated testing key (by using
sign-file from scripts/) and with the tcp_bic.ko kernel module if it is
found in the system. The test does not fail if tcp_bic.ko is not found.
First, perform an unsuccessful signature verification without data.
Second, perform a successful signature verification with the session
keyring and a new one created for testing.
Then, ensure that permission and validation checks are done properly on the
keyring provided to bpf_verify_pkcs7_signature(), despite those checks were
deferred at the time the keyring was retrieved with bpf_lookup_user_key().
The tests expect to encounter an error if the Search permission is removed
from the keyring, or the keyring is expired.
Finally, perform a successful and unsuccessful signature verification with
the keyrings with pre-determined IDs (the last test fails because the key
is not in the platform keyring).
The test is currently in the deny list for s390x (JIT does not support
calling kernel function).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Link: https://lore.kernel.org/r/20220920075951.929132-13-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test to ensure that bpf_lookup_user_key() creates a referenced
special keyring when the KEY_LOOKUP_CREATE flag is passed to this function.
Ensure that the kfunc rejects invalid flags.
Ensure that a keyring can be obtained from bpf_lookup_system_key() when one
of the pre-determined keyring IDs is provided.
The test is currently blacklisted for s390x (JIT does not support calling
kernel function).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Link: https://lore.kernel.org/r/20220920075951.929132-12-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add verifier tests for bpf_lookup_*_key() and bpf_key_put(), to ensure that
acquired key references stored in the bpf_key structure are released, that
a non-NULL bpf_key pointer is passed to bpf_key_put(), and that key
references are not leaked.
Also, slightly modify test_verifier.c, to find the BTF ID of the attach
point for the LSM program type (currently, it is done only for TRACING).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220920075951.929132-11-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since the eBPF CI does not support kernel modules, change the kernel config
to compile everything as built-in.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Daniel Müller <deso@posteo.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220920075951.929132-10-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move dynptr type check to is_dynptr_type_expected() from
is_dynptr_reg_valid_init(), so that callers can better determine the cause
of a negative result (dynamic pointer not valid/initialized, dynamic
pointer of the wrong type). It will be useful for example for BTF, to
restrict which dynamic pointer types can be passed to kfuncs, as initially
only the local type will be supported.
Also, splitting makes the code more readable, since checking the dynamic
pointer type is not necessarily related to validity and initialization.
Split the validity/initialization and dynamic pointer type check also in
the verifier, and adjust the expected error message in the test (a test for
an unexpected dynptr type passed to a helper cannot be added due to missing
suitable helpers, but this case has been tested manually).
Cc: Joanne Koong <joannelkoong@gmail.com>
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220920075951.929132-4-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's possible to specify particular tests for test_bpf.ko with
module parameters. Make it possible to pass the module parameters,
example:
test_kmod.sh test_range=1,3
Since magnitude tests take long time it can be reasonable to skip
them.
Signed-off-by: Yauheni Kaliuta <ykaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220908120146.381218-1-ykaliuta@redhat.com
This change includes selftests that validate the expected behavior and
APIs of the new BPF_MAP_TYPE_USER_RINGBUF map type.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220920000100.477320-5-void@manifault.com
The attach flags is meaningless for effective query and
its value will always be set as 0 during effective query.
Root cg's effective progs is always its attached progs,
so we use non-effective query to get its progs count and
attach flags. And we don't need the remain attach flags
check.
Fixes: b79c9fc955 ("bpf: implement BPF_PROG_QUERY for BPF_LSM_CGROUP")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20220921104604.2340580-4-pulehui@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extend the ptrace test support for NT_ARM_TLS to cover TPIDR2_EL0 - on
systems that support SME the NT_ARM_TLS regset can be up to 2 elements
long with the second element containing TPIDR2_EL0. On systems
supporting SME we verify that this value can be read and written while
on systems that do not support SME we verify correct truncation of reads
and writes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154921.837871-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In preparation for extending support for NT_ARM_TLS to cover additional
TPIDRs add some tests for the existing interface. Do this in a generic
ptrace test program to provide a place to collect additional tests in
the future.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154921.837871-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Test 0811: Add multiple basic filter with cmp ematch u8/link layer and
default action and dump them
Test 5129: List basic filters
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 8293: Add tcindex filter with default action
Test 7281: Add tcindex filter with hash size and pass action
Test b294: Add tcindex filter with mask shift and reclassify action
Test 0532: Add tcindex filter with pass_on and continue actions
Test d473: Add tcindex filter with pipe action
Test 2940: Add tcindex filter with miltiple actions
Test 1893: List tcindex filters
Test 2041: Change tcindex filter with pass action
Test 9203: Replace tcindex filter with pass action
Test 7957: Delete tcindex filter with drop action
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 2141: Add rsvp filter with tcp proto and specific IP address
Test 5267: Add rsvp filter with udp proto and specific IP address
Test 2819: Add rsvp filter with src ip and src port
Test c967: Add rsvp filter with tunnelid and continue action
Test 5463: Add rsvp filter with tunnel and pipe action
Test 2332: Add rsvp filter with miltiple actions
Test 8879: Add rsvp filter with tunnel and skp flag
Test 8261: List rsvp filters
Test 8989: Delete rsvp filter
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test e122: Add route filter with from and to tag
Test 6573: Add route filter with fromif and to tag
Test 1362: Add route filter with to flag and reclassify action
Test 4720: Add route filter with from flag and continue actions
Test 2812: Add route filter with form tag and pipe action
Test 7994: Add route filter with miltiple actions
Test 4312: List route filters
Test 2634: Delete route filter with pipe action
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 5294: Add flow filter with map key and ops
Test 3514: Add flow filter with map key or ops
Test 7534: Add flow filter with map key xor ops
Test 4524: Add flow filter with map key rshift ops
Test 0230: Add flow filter with map key addend ops
Test 2344: Add flow filter with src map key
Test 9304: Add flow filter with proto map key
Test 9038: Add flow filter with proto-src map key
Test 2a03: Add flow filter with proto-dst map key
Test a073: Add flow filter with iif map key
Test 3b20: Add flow filter with priority map key
Test 8945: Add flow filter with mark map key
Test c034: Add flow filter with nfct map key
Test 0205: Add flow filter with nfct-src map key
Test 5315: Add flow filter with nfct-src map key
Test 7849: Add flow filter with nfct-proto-src map key
Test 9902: Add flow filter with nfct-proto-dst map key
Test 6742: Add flow filter with rt-classid map key
Test 5432: Add flow filter with sk-uid map key
Test 4134: Add flow filter with sk-gid map key
Test 4522: Add flow filter with vlan-tag map key
Test 4253: Add flow filter with rxhash map key
Test 4452: Add flow filter with hash key list
Test 4341: Add flow filter with muliple ops
Test 4392: List flow filters
Test 4322: Change flow filter with map key num
Test 2320: Replace flow filter with map key num
Test 3213: Delete flow filter with map key num
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 6273: Add cgroup filter with cmp ematch u8/link layer and drop action
Test 4721: Add cgroup filter with cmp ematch u8/link layer with trans
flag and pass action
Test d392: Add cgroup filter with cmp ematch u16/link layer and pipe action
Test 0234: Add cgroup filter with cmp ematch u32/link layer and miltiple
actions
Test 8499: Add cgroup filter with cmp ematch u8/network layer and pass
action
Test b273: Add cgroup filter with cmp ematch u8/network layer with trans
flag and drop action
Test 1934: Add cgroup filter with cmp ematch u16/network layer and pipe
action
Test 2733: Add cgroup filter with cmp ematch u32/network layer and
miltiple actions
Test 3271: Add cgroup filter with NOT cmp ematch rule and pass action
Test 2362: Add cgroup filter with two ANDed cmp ematch rules and single
action
Test 9993: Add cgroup filter with two ORed cmp ematch rules and single
action
Test 2331: Add cgroup filter with two ANDed cmp ematch rules and one ORed
ematch rule and single action
Test 3645: Add cgroup filter with two ANDed cmp ematch rules and one NOT
ORed ematch rule and single action
Test b124: Add cgroup filter with u32 ematch u8/zero offset and drop
action
Test 7381: Add cgroup filter with u32 ematch u8/zero offset and invalid
value >0xFF
Test 2231: Add cgroup filter with u32 ematch u8/positive offset and drop
action
Test 1882: Add cgroup filter with u32 ematch u8/invalid mask >0xFF
Test 1237: Add cgroup filter with u32 ematch u8/missing offset
Test 3812: Add cgroup filter with u32 ematch u8/missing AT keyword
Test 1112: Add cgroup filter with u32 ematch u8/missing value
Test 3241: Add cgroup filter with u32 ematch u8/non-numeric value
Test e231: Add cgroup filter with u32 ematch u8/non-numeric mask
Test 4652: Add cgroup filter with u32 ematch u8/negative offset and pass
Test 1331: Add cgroup filter with u32 ematch u16/zero offset and pipe
action
Test e354: Add cgroup filter with u32 ematch u16/zero offset and invalid
value >0xFFFF
Test 3538: Add cgroup filter with u32 ematch u16/positive offset and drop
action
Test 4576: Add cgroup filter with u32 ematch u16/invalid mask >0xFFFF
Test b842: Add cgroup filter with u32 ematch u16/missing offset
Test c924: Add cgroup filter with u32 ematch u16/missing AT keyword
Test cc93: Add cgroup filter with u32 ematch u16/missing value
Test 123c: Add cgroup filter with u32 ematch u16/non-numeric value
Test 3675: Add cgroup filter with u32 ematch u16/non-numeric mask
Test 1123: Add cgroup filter with u32 ematch u16/negative offset and drop
action
Test 4234: Add cgroup filter with u32 ematch u16/nexthdr+ offset and pass
action
Test e912: Add cgroup filter with u32 ematch u32/zero offset and pipe
action
Test 1435: Add cgroup filter with u32 ematch u32/positive offset and drop
action
Test 1282: Add cgroup filter with u32 ematch u32/missing offset
Test 6456: Add cgroup filter with u32 ematch u32/missing AT keyword
Test 4231: Add cgroup filter with u32 ematch u32/missing value
Test 2131: Add cgroup filter with u32 ematch u32/non-numeric value
Test f125: Add cgroup filter with u32 ematch u32/non-numeric mask
Test 4316: Add cgroup filter with u32 ematch u32/negative offset and drop
action
Test 23ae: Add cgroup filter with u32 ematch u32/nexthdr+ offset and pipe
action
Test 23a1: Add cgroup filter with canid ematch and single SFF
Test 324f: Add cgroup filter with canid ematch and single SFF with mask
Test 2576: Add cgroup filter with canid ematch and multiple SFF
Test 4839: Add cgroup filter with canid ematch and multiple SFF with masks
Test 6713: Add cgroup filter with canid ematch and single EFF
Test ab9d: Add cgroup filter with canid ematch and multiple EFF with masks
Test 5349: Add cgroup filter with canid ematch and a combination of
SFF/EFF
Test c934: Add cgroup filter with canid ematch and a combination of
SFF/EFF with masks
Test 4319: Replace cgroup filter with diffferent match
Test 4636: Delete cgroup filter
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 23c3: Add cBPF filter with valid bytecode
Test 1563: Add cBPF filter with invalid bytecode
Test 2334: Add eBPF filter with valid object-file
Test 2373: Add eBPF filter with invalid object-file
Test 4423: Replace cBPF bytecode
Test 5122: Delete cBPF filter
Test e0a9: List cBPF filters
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since 1b620d539c ("kbuild: disable header exports for UML in a
straightforward way"), installing headers fails on UML, so just disable
installing them, since they're not needed anyway on the architecture.
Fixes: b438b3b8d6 ("wireguard: selftests: support UML")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a regression test for commit 592335a416 ("bonding: accept
unsolicited NA message") and commit b7f14132bf ("bonding: use unspecified
address if no available link local address"). When the bond interface
up and no available link local address, unspecified address(::) is used to
send the NS message. The unsolicited NA message should also be accepted
for validation.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20220920033047.173244-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Remove the recent "unshare time namespace on vfork+exec" feature (Andrei Vagin)
-----BEGIN PGP SIGNATURE-----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=yFGx
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve reverts from Kees Cook:
"The recent work to support time namespace unsharing turns out to have
some undesirable corner cases, so rather than allowing the API to stay
exposed for another release, it'd be best to remove it ASAP, with the
replacement getting another cycle of testing. Nothing is known to use
this yet, so no userspace breakage is expected.
For more details, see:
https://lore.kernel.org/lkml/ed418e43ad28b8688cfea2b7c90fce1c@ispras.ru
Summary:
- Remove the recent 'unshare time namespace on vfork+exec' feature
(Andrei Vagin)"
* tag 'execve-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Revert "fs/exec: allow to unshare a time namespace on vfork+exec"
Revert "selftests/timens: add a test for vfork+exit"
Add IPv4 and IPv6 test cases for unresolved multicast routes, testing
that queued packets are forwarded after installing a matching (S, G)
route.
The test cases can be used to reproduce the bugs fixed in "ipmr: Always
call ip{,6}_mr_forward() from RCU read-side critical section".
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This selftest is designed for testing the support of NEXT-C-SID flavor
for SRv6 End behavior. It instantiates a virtual network composed of
several nodes: hosts and SRv6 routers. Each node is realized using a
network namespace that is properly interconnected to others through veth
pairs.
The test considers SRv6 routers implementing IPv4/IPv6 L3 VPNs leveraged
by hosts for communicating with each other. Such routers i) apply
different SRv6 Policies to the traffic received from connected hosts,
considering the IPv4 or IPv6 protocols; ii) use the NEXT-C-SID
compression mechanism for encoding several SRv6 segments within a single
128-bit SID address, referred to as a Compressed SID (C-SID) container.
The NEXT-C-SID is provided as a "flavor" of the SRv6 End behavior,
enabling it to properly process the C-SID containers. The correct
execution of the enabled NEXT-C-SID SRv6 End behavior is verified
through reachability tests carried out between hosts belonging to the
same VPN.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The previous patch added a test which can be used instead of qos_burst.sh.
Remove this test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an equivalent test to qos_burst, the test's purpose is same, but the
new test uses simpler topology and does not require forcing low speed.
In addition, it can be run Spectrum-2 and not only Spectrum-3+. The idea
is to use a shaper in order to limit the traffic and create congestion.
qos_burst test uses small pool, sends many small packets, and verify that
packets are not dropped, which means that many descriptors can be handled.
This test should check the change that commit c864769add
("mlxsw: Configure descriptor buffers") pushed.
Instead, the new test tries to use more than 85% of maximum supported
descriptors. The idea is to use big pool (as much as the ASIC supports),
such that the pool size does not limit the traffic, then send many small
packets, which means that many descriptors are used, and check how many
packets the switch can handle.
The usage of shaper allows to run the test in all ASICs, regardless of
the CPU abilities, as it is able to create the congestion with low rate
of packets.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The maximum pool size is exposed via 'devlink sb' command. The next
patch will add a test which increases some pools to the maximum size.
Add a function to query the value.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
QOS tests create congestion and verify the switch behavior. To create
congestion, they need to have more traffic than the port can handle, so
some of them force 1Gbps speed.
The tests assume that 1Gbps speed is supported, otherwise, they will fail.
Spectrum-4 ASIC will not support this speed in all ports, so to be able
to run the tests there, some adjustments are required. Use shapers to limit
the traffic instead of forcing speed. Note that for several ports, the
speed configuration is just for autoneg issues, so shaper is not needed
instead.
The tests already use ETS qdisc as a root and RED qdiscs as children. Add
a new TBF shaper to limit the rate of traffic, and use it as a root qdisc,
then save the previous hierarchy of qdiscs under the new TBF root.
In some ASICs, the shapers do not limit the traffic as accurately as
forcing speed. To make the tests stable, allow the backlog size to be up to
+-10% of the threshold. The aim of the tests is to make sure that with
backlog << threshold, there are no drops, and that packets are dropped
somewhere in vicinity of the configured threshold.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
QOS tests create congestion and verify the switch behavior. To create
congestion, they need to have more traffic than the port can handle, so
some of them force 1Gbps speed.
The tests assume that 1Gbps speed is supported, otherwise, they will fail.
Spectrum-4 ASIC will not support this speed in all ports, so to be able
to run QOS tests there, some adjustments are required. Use shapers to
limit the traffic instead of forcing speed. Note that for several ports,
the speed configuration is just for autoneg issues, so shaper is not needed
instead.
In tests that already use shapers, set the existing shaper to be a child of
a new TBF shaper which is added as a root qdisc and acts as a port shaper.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test result message when test_task_storage_map_stress_lookup()
succeeds or is skipped. The test case can be skipped due to the choose
of preemption model in kernel config, so export skips in test_maps.c and
increase it when needed.
The following is the output of test_maps when the test case succeeds or
is skipped:
test_task_storage_map_stress_lookup:PASS
test_maps: OK, 0 SKIPPED
test_task_storage_map_stress_lookup SKIP (no CONFIG_PREEMPT)
test_maps: OK, 1 SKIPPED
Fixes: 73b97bc78b ("selftests/bpf: Test concurrent updates on bpf_task_storage_busy")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220919035714.2195144-1-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
* kvm-arm64/single-step-async-exception:
: .
: Single-step fixes from Reiji Watanabe:
:
: "This series fixes two bugs of single-step execution enabled by
: userspace, and add a test case for KVM_GUESTDBG_SINGLESTEP to
: the debug-exception test to verify the single-step behavior."
: .
KVM: arm64: selftests: Add a test case for KVM_GUESTDBG_SINGLESTEP
KVM: arm64: selftests: Refactor debug-exceptions to make it amenable to new test cases
KVM: arm64: Clear PSTATE.SS when the Software Step state was Active-pending
KVM: arm64: Preserve PSTATE.SS for the guest while single-step is enabled
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a test case for KVM_GUESTDBG_SINGLESTEP to the debug-exceptions test.
The test enables single-step execution from userspace, and check if the
exit to userspace occurs for each instruction that is stepped.
Set the default number of the test iterations to a number of iterations
sufficient to always reproduce the problem that the previous patch fixes
on an Ampere Altra machine.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220917010600.532642-5-reijiw@google.com
Split up the current test into a helper, but leave the debug version
checking in main(), to make it convenient to add a new debug exception
test case in a subsequent patch.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220917010600.532642-4-reijiw@google.com
Add tests for memblock_alloc_try_nid() and memblock_alloc_try_nid_raw()
where the simulated physical memory is set up with multiple NUMA nodes.
Additionally, two of these tests set nid != NUMA_NO_NODE. All tests are
run for both top-down and bottom-up allocation directions.
The tested scenarios are:
Range unrestricted:
- region cannot be allocated:
+ none of the nodes have enough memory to allocate the region
Range restricted:
- region can be allocated in the specific node requested without dropping
min_addr:
+ the range fully overlaps with the node, and there are adjacent
reserved regions
- region cannot be allocated:
+ nid is set to NUMA_NO_NODE and the total range can fit the region,
but the range is split between two nodes and everything else is
reserved
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/4b2c7e6e5f3a9837939e99293c77e0e6fc3ae4f9.1663046060.git.remckee0@gmail.com
Add tests for memblock_alloc_try_nid() and memblock_alloc_try_nid_raw()
where the simulated physical memory is set up with multiple NUMA nodes.
Additionally, all of these tests set nid != NUMA_NO_NODE. These tests are
run with a bottom-up allocation direction.
The tested scenarios are:
Range unrestricted:
- region can be allocated in the specific node requested:
+ there are no previously reserved regions
+ the requested node is partially reserved but has enough space
- the specific node requested cannot accommodate the request, but the
region can be allocated in a different node:
+ there are no previously reserved regions, but node is too small
+ the requested node is fully reserved
+ the requested node is partially reserved and does not have
enough space
Range restricted:
- region can be allocated in the specific node requested after dropping
min_addr:
+ range partially overlaps with two different nodes, where the first
node is the requested node
+ range partially overlaps with two different nodes, where the
requested node ends before min_addr
- region cannot be allocated in the specific node requested, but it can be
allocated in the requested range:
+ range overlaps with multiple nodes along node boundaries, and the
requested node ends before min_addr
+ range overlaps with multiple nodes along node boundaries, and the
requested node starts after max_addr
- region cannot be allocated in the specific node requested, but it can be
allocated after dropping min_addr:
+ range partially overlaps with two different nodes, where the
second node is the requested node
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/00c4810daaf5d050abc71915b24ed7419bb16b51.1663046060.git.remckee0@gmail.com
Add tests for memblock_alloc_try_nid() and memblock_alloc_try_nid_raw()
where the simulated physical memory is set up with multiple NUMA nodes.
Additionally, all of these tests set nid != NUMA_NO_NODE. These tests are
run with a top-down allocation direction.
The tested scenarios are:
Range unrestricted:
- region can be allocated in the specific node requested:
+ there are no previously reserved regions
+ the requested node is partially reserved but has enough space
- the specific node requested cannot accommodate the request, but the
region can be allocated in a different node:
+ there are no previously reserved regions, but node is too small
+ the requested node is fully reserved
+ the requested node is partially reserved and does not have
enough space
Range restricted:
- region can be allocated in the specific node requested after dropping
min_addr:
+ range partially overlaps with two different nodes, where the first
node is the requested node
+ range partially overlaps with two different nodes, where the
requested node ends before min_addr
- region cannot be allocated in the specific node requested, but it can be
allocated in the requested range:
+ range overlaps with multiple nodes along node boundaries, and the
requested node ends before min_addr
+ range overlaps with multiple nodes along node boundaries, and the
requested node starts after max_addr
- region cannot be allocated in the specific node requested, but it can be
allocated after dropping min_addr:
+ range partially overlaps with two different nodes, where the
second node is the requested node
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/84009c5b3969337ccf89df850db56d364f8c228b.1663046060.git.remckee0@gmail.com
Add function setup_numa_memblock() for setting up a memory layout with
multiple NUMA nodes in a previously allocated dummy physical memory.
This function can be used in place of setup_memblock() in tests that need
to simulate a NUMA system.
setup_numa_memblock():
- allows for setting up a memory layout by specifying the fraction of
MEM_SIZE in each node
Set CONFIG_NODES_SHIFT to 4 when building with NUMA=1 to allow for up to
16 NUMA nodes.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/4566d816a85f009268d4858d1ef06c7571a960f9.1663046060.git.remckee0@gmail.com
Use proper SEC("tc") for test_verif_scale{1,3} programs. It's not
a problem for selftests right now because we manually set type
programmatically, but not having correct SEC() definitions makes it
harded to generically load BPF object files.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220909193053.577111-2-andrii@kernel.org
Test that the bonding and team drivers clean up an underlying device's
address lists (dev->uc, dev->mc) when the aggregated device is deleted.
Test addition and removal of the LACPDU multicast address on underlying
devices by the bonding driver.
v2:
* add lag_lib.sh to TEST_FILES
v3:
* extend bond_listen_lacpdu_multicast test to init_state up and down cases
* remove some superfluous shell syntax and 'set dev ... up' commands
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 3671: Delete tunnel_key set action with valid index
Test 8597: Delete tunnel_key set action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 3872: Delete sample action with valid index
Test a394: Delete sample action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test b811: Delete nat action with valid index
Test a521: Delete nat action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test a972: Delete ife encode action with valid index
Test 1272: Delete ife encode action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 6571: Delete connmark action with valid index
Test 3426: Delete connmark action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 2029: Add xt action with log-prefix
Test 3562: Replace xt action log-prefix
Test 8291: Delete xt action with valid index
Test 5169: Delete xt action with invalid index
Test 7284: List xt actions
Test 5010: Flush xt actions
Test 8437: Add xt action with duplicate index
Test 2837: Add xt action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 5153: Add gate action with priority and sched-entry
Test 7189: Add gate action with base-time
Test a721: Add gate action with cycle-time
Test c029: Add gate action with cycle-time-ext
Test 3719: Replace gate base-time action
Test d821: Delete gate action with valid index
Test 3128: Delete gate action with invalid index
Test 7837: List gate actions
Test 9273: Flush gate actions
Test c829: Add gate action with duplicate index
Test 3043: Add gate action with invalid index
Test 2930: Add gate action with cookie
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test c826: Add ctinfo action with default setting
Test 0286: Add ctinfo action with dscp
Test 4938: Add ctinfo action with valid cpmark and zone
Test 7593: Add ctinfo action with drop control
Test 2961: Replace ctinfo action zone and action control
Test e567: Delete ctinfo action with valid index
Test 6a91: Delete ctinfo action with invalid index
Test 5232: List ctinfo actions
Test 7702: Flush ctinfo actions
Test 3201: Add ctinfo action with duplicate index
Test 8295: Add ctinfo action with invalid index
Test 3964: Replace ctinfo action with invalid goto_chain control
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Validate the RNG hwcap and make sure we don't generate a SIGILL reading
RNDR when it is reported.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220913141101.151400-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Wang Yufen
Kui-Feng Lee
Vitaly Kuznetsov
Vipin Sharma
Oliver Upton
Athira Rajeev
Zhengchao Shao
Pavel Begunkov
Yauheni Kaliuta
David Matlack
Jiri Olsa
Jakub Matěna
Liam R. Howlett
Vladimir Oltean
Masami Hiramatsu (Google)
Sean Christopherson
Liu Jian
Linus Torvalds
Dan Williams
Andrii Nakryiko
Yosry Ahmed
Tejun Heo
Song Liu
Paolo Bonzini
Matthieu Baerts
Joe Lawrence
Hou Tao
Jinrong Liang
Jakub Kicinski
Mark Brown
Hangbin Liu
Jonathan Toppins
Lorenzo Bianconi
Roberto Sassu
David Vernet
Pu Lehui
Ingo Molnar
Jason A. Donenfeld
Ido Schimmel
Andrea Mayer
Amit Cohen
Marc Zyngier
Reiji Watanabe
Rebecca Mckeever
Benjamin Poirier