Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data
will be set to NULL in device_unbind_cleanup() after calling ->remove().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data
will be set to NULL in device_unbind_cleanup() after calling ->remove().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data
will be set to NULL in device_unbind_cleanup() after calling ->remove().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
req->cqe.res is set in io_read() to the amount of bytes left to be done,
which is used to figure out whether to fail a read or not. However,
io_read() may do another without returning, and we stash the previous
value into ->bytes_done but forget to update cqe.res. Then we ask a read
to do strictly less than cqe.res but expect the return to be exactly
cqe.res.
Fix the bug by updating cqe.res for retries.
Cc: stable@vger.kernel.org
Reported-and-Tested-by: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3a1088440c7be98e5800267af922a67da0ef9f13.1664235732.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 1527f69204 ("ata: ahci: Add Green Sardine vendor ID as
board_ahci_mobile") added an explicit entry for AMD Green Sardine
AHCI controller using the board_ahci_mobile configuration (this
configuration has later been renamed to board_ahci_low_power).
The board_ahci_low_power configuration enables support for low power
modes.
This explicit entry takes precedence over the generic AHCI controller
entry, which does not enable support for low power modes.
Therefore, when commit 1527f69204 ("ata: ahci: Add Green Sardine
vendor ID as board_ahci_mobile") was backported to stable kernels,
it make some Pioneer optical drives, which was working perfectly fine
before the commit was backported, stop working.
The real problem is that the Pioneer optical drives do not handle low
power modes correctly. If these optical drives would have been tested
on another AHCI controller using the board_ahci_low_power configuration,
this issue would have been detected earlier.
Unfortunately, the board_ahci_low_power configuration is only used in
less than 15% of the total AHCI controller entries, so many devices
have never been tested with an AHCI controller with low power modes.
Fixes: 1527f69204 ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile")
Cc: stable@vger.kernel.org
Reported-by: Jaap Berkhout <j.j.berkhout@staalenberk.nl>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Declarations for static symbols are useless code repetition (unless
there are cyclic dependencies).
Reorder some functions and variables which allows to get rid of 7
forward declarations.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220926153946.1478260-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
cpu idle hardware workaround.
* A new Intel model number. Folks like these upstream as soon as
possible so that each developer doing feature development doesn't
need to carry their own #define.
* SGX fixes for a userspace crash and a rare kernel warning
-----BEGIN PGP SIGNATURE-----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=ULl1
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Dave Hansen:
- A performance fix for recent large AMD systems that avoids an ancient
cpu idle hardware workaround
- A new Intel model number. Folks like these upstream as soon as
possible so that each developer doing feature development doesn't
need to carry their own #define
- SGX fixes for a userspace crash and a rare kernel warning
* tag 'x86_urgent_for_v6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ACPI: processor idle: Practically limit "Dummy wait" workaround to old Intel systems
x86/sgx: Handle VA page allocation failure for EAUG on PF.
x86/sgx: Do not fail on incomplete sanitization on premature stop of ksgxd
x86/cpu: Add CPU model numbers for Meteor Lake
I'm getting warnings:
/tmp/next/build/drivers/leds/leds-pca963x.c: In function 'pca963x_register_leds':
/tmp/next/build/drivers/leds/leds-pca963x.c:355:3: error: this 'if' clause does not guard...
+[-Werror=misleading-indentation]
355 | if (hw_blink)
| ^~
/tmp/next/build/drivers/leds/leds-pca963x.c:357:4: note: ...this statement, but the latter is
+misleadingly indented as if it were guarded by the 'if'
357 | led->blinking = false;
| ^~~
cc1: all warnings being treated as errors
Fix the indentation to make them go away.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
A recent change affecting the behaviour of phys_to_dma() to
actually require the device tree ranges to work unmasked a
bug in the Integrator DMA ranges.
The PL110 uses the CMA allocator to obtain coherent allocations
from a dedicated 1MB video memory, leading to the following
call chain:
drm_gem_cma_create()
dma_alloc_attrs()
dma_alloc_from_dev_coherent()
__dma_alloc_from_coherent()
dma_get_device_base()
phys_to_dma()
translate_phys_to_dma()
phys_to_dma() by way of translate_phys_to_dma() will nowadays not
provide 1:1 mappings unless the ranges are properly defined in
the device tree and reflected into the dev->dma_range_map.
There is a bug in the device trees because the DMA ranges are
incorrectly specified, and the patch uncovers this bug.
Solution:
- Fix the LB (logic bus) ranges to be 1-to-1 like they should
have always been.
- Provide a 1:1 dma-ranges attribute to the PL110.
- Mark the PL110 display controller as DMA coherent.
This makes the DMA ranges work right and makes the PL110
framebuffer work again.
Fixes: af6f23b88e ("ARM/dma-mapping: use the generic versions of dma_to_phys/phys_to_dma by default")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220926073311.1610568-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently, struct efi_boot_memmap is a struct that is passed around
between callers of efi_get_memory_map() and the users of the resulting
data, and which carries pointers to various variables whose values are
provided by the EFI GetMemoryMap() boot service.
This is overly complex, and it is much easier to carry these values in
the struct itself. So turn the struct into one that carries these data
items directly, including a flex array for the variable number of EFI
memory descriptors that the boot service may return.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The virt map is a set of efi_memory_desc_t descriptors that are passed
to SetVirtualAddressMap() to inform the firmware about the desired
virtual mapping of the regions marked as EFI_MEMORY_RUNTIME. The only
reason we currently call the efi_get_memory_map() helper is that it
gives us an allocation that is guaranteed to be of sufficient size.
However, efi_get_memory_map() has grown some additional complexity over
the years, and today, we're actually better off calling the EFI boot
service directly with a zero size, which tells us how much memory should
be enough for the virt map.
While at it, avoid creating the VA map allocation if we will not be
using it anyway, i.e., if efi_novamap is true.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Practical experience (and advice from Alexei) tell us that bitfields in
structs lead to un-optimized assembly code. I've verified this change
does lead to better x86_64 assembly, both via objdump and playing with
code snippets in godbolt.org.
Using scripts/bloat-o-meter shows the code size is reduced with 24
bytes for xdp_convert_buff_to_frame() that gets inlined e.g. in
i40e_xmit_xdp_tx_ring() which were used for microbenchmarking.
Microbenchmarking results do show improvements, but very small and
varying between 0.5 to 2 nanosec improvement per packet.
The member @metasize is changed from u8 to u32. Future users of this
area could split this into two u16 fields. I've also benchmarked with
two u16 fields showing equal performance gains and code size reduction.
The moved member @frame_sz doesn't change sizeof struct due to existing
padding. Like xdp_buff member @frame_sz is placed next to @flags, which
allows compiler to optimize assignment of these.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/166393728005.2213882.4162674859542409548.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cycle, 18 are for earlier issues, and are cc:stable.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYzH+NgAKCRDdBJ7gKXxA
ju4AAQDrFWErVp+ra5P66SSbiFmm8NAW1awt4nHwAPcihNf3yQD/eQcB3w2q0Dm1
9HjsyEVkTYIeaJSAbCraDnMwUdWTIgY=
=p5+0
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull last (?) hotfixes from Andrew Morton:
"26 hotfixes.
8 are for issues which were introduced during this -rc cycle, 18 are
for earlier issues, and are cc:stable"
* tag 'mm-hotfixes-stable-2022-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
x86/uaccess: avoid check_object_size() in copy_from_user_nmi()
mm/page_isolation: fix isolate_single_pageblock() isolation behavior
mm,hwpoison: check mm when killing accessing process
mm/hugetlb: correct demote page offset logic
mm: prevent page_frag_alloc() from corrupting the memory
mm: bring back update_mmu_cache() to finish_fault()
frontswap: don't call ->init if no ops are registered
mm/huge_memory: use pfn_to_online_page() in split_huge_pages_all()
mm: fix madivse_pageout mishandling on non-LRU page
powerpc/64s/radix: don't need to broadcast IPI for radix pmd collapse flush
mm: gup: fix the fast GUP race against THP collapse
mm: fix dereferencing possible ERR_PTR
vmscan: check folio_test_private(), not folio_get_private()
mm: fix VM_BUG_ON in __delete_from_swap_cache()
tools: fix compilation after gfp_types.h split
mm/damon/dbgfs: fix memory leak when using debugfs_lookup()
mm/migrate_device.c: copy pte dirty bit to page
mm/migrate_device.c: add missing flush_cache_page()
mm/migrate_device.c: flush TLB while holding PTL
x86/mm: disable instrumentations of mm/pgprot.c
...
Vladimir Oltean says:
====================
Improve tsn_lib selftests for future distributed tasks
Some of the boards I am working with are limited in the number of ports
that they offer, and as more TSN related selftests are added, it is
important to be able to distribute the work among multiple boards.
A large part of implementing that is ensuring network-wide
synchronization, but also permitting more streams of data to flow
through the network. There is the more important aspect of also
coordinating the timing characteristics of those streams, and that is
also something that is tackled, although not in this modest patch set.
The goal here is not to introduce new selftests yet, but just to lay a
better foundation for them. These patches are a part of the cleanup work
I've done while working on selftests for frame preemption. They are
regression-tested with psfp.sh.
====================
Link: https://lore.kernel.org/r/20220923210016.3406301-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can make the phc2sys helper not only synchronize a PHC to
CLOCK_REALTIME, which is what it currently does, but also CLOCK_REALTIME
to a PHC, which is going to be needed in distributed TSN tests.
Instead of making the complexity of the arguments passed to
phc2sys_start() explode, we can let it figure out the sync direction
automatically, based on ptp4l's port states.
Towards that goal, pass just the path to the desired ptp4l instance's
UNIX domain socket, and remove the $if_name argument (from which it
derives the PHC). Also adapt the one caller from the ocelot psfp.sh
test. In the case of psfp.sh, phc2sys_start is able to properly figure
out that CLOCK_REALTIME is the source clock and swp1's PHC is the
destination, because of the way in which ptp4l_start for the
UDS_ADDRESS_SWP1 was called: with slave_only=false, so it will always
win the BMCA and always become the sync master between itself and $h1.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the PID variable for the isochron receiver into a separate
namespace per stats port, to allow multiple receivers (and/or
orchestration daemons) to be instantiated by the same script.
Preserve the existing behavior by making isochron_do() use the default
stats TCP port of 5000.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch ports will want to act as Boundary Clocks, which are configured
using ptp4l by specifying the "-i" argument multiple times.
Since we track a log file and a pid file for each ptp4l instance, and we
want to be compatible with the existing single-port callers of
ptp4l_start and ptp4l_stop, pass the interface list as a single string
of space-separated values. Based on this, we create a label for each
ptp4l instance, where the spaces are replaced with underscores
(ptp4l_start "eth0 eth1" generates "ptp4l_pid_eth0_eth1").
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The extra_args argument ($3) of isochron_recv_start is overwritten with
uds ($2), if that argument exists.
This is currently not a problem, because the only TSN selftest
(ocelot/psfp.sh) omits remote sync so it does not specify to the
receiver a UNIX domain socket for ptp4l. So $uds is currently an empty
string.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The devm_ioremap() function returns NULL on error, it doesn't return
error pointers.
Fixes: 3a1a274e93 ("mlxbf_gige: compute MDIO period based on i1clk")
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Link: https://lore.kernel.org/r/20220923023640.116057-1-wupeng58@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The label passed to the QDESC_GET for the ETHOFLD TXQ, RXQ, and FLQ, is the
'out' one, which skips the 'out_unlock' label, and thus doesn't unlock the
'uld_mutex' before returning. Additionally, since commit 5148e5950c
("cxgb4: add EOTID tracking and software context dump"), the access to
these ETHOFLD hardware queues should be protected by the 'mqprio_mutex'
instead.
Fixes: 2d0cb84dd9 ("cxgb4: add ETHOFLD hardware queue support")
Fixes: 5148e5950c ("cxgb4: add EOTID tracking and software context dump")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Link: https://lore.kernel.org/r/20220922175109.764898-1-rafaelmendsr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
forgotten to apply before the last pull request for ext4. My bad.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmMx4H8ACgkQ8vlZVpUN
gaPSMwgAij3HAydTOXKBpiMW426I+GhhQCeKzud2uPs74gB3ikfh0YizJe520dpH
ffFAnItLAGChcO+vRpYSJumFKQJpCu+bb/6lOJ2oVBhoASPBlNNxVmSsyqcNMmaI
HGmvPgwcAhzeaaAFzkhzcpeEdygldUGClekRwvjLqYyj6i9EfwHkPBVzMn/9sSNk
Pasp3AhEH5c2IhR9JnH7VvNDCIVBnIqapKsiyysBs1cjEvs5wCLAm3PhgKrjGERR
RUvirl5jbTAAxRxdyiBppVSsbj10lLD+knKSxdnoJ+X7jiZp7ktEcCI+DVdwt5Cd
NmfwlVJxQ91lq90FBsJyB6lzU5e69g==
=GEOG
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull missed ext4 fix from Ted Ts'o:
"Fix an potential unitialzied variable bug; this was a fixup that I had
forgotten to apply before the last pull request for ext4. My bad"
* tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fixup possible uninitialized variable access in ext4_mb_choose_next_group_cr1()
There is a recursive lock on the cpu_hotplug_lock.
In kernel/trace/trace_osnoise.c:<start/stop>_per_cpu_kthreads:
- start_per_cpu_kthreads calls cpus_read_lock() and if
start_kthreads returns a error it will call stop_per_cpu_kthreads.
- stop_per_cpu_kthreads then calls cpus_read_lock() again causing
deadlock.
Fix this by calling cpus_read_unlock() before calling
stop_per_cpu_kthreads. This behavior can also be seen in commit
f46b16520a ("trace/hwlat: Implement the per-cpu mode").
This error was noticed during the LTP ftrace-stress-test:
WARNING: possible recursive locking detected
--------------------------------------------
sh/275006 is trying to acquire lock:
ffffffffb02f5400 (cpu_hotplug_lock){++++}-{0:0}, at: stop_per_cpu_kthreads
but task is already holding lock:
ffffffffb02f5400 (cpu_hotplug_lock){++++}-{0:0}, at: start_per_cpu_kthreads
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(cpu_hotplug_lock);
lock(cpu_hotplug_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by sh/275006:
#0: ffff8881023f0470 (sb_writers#24){.+.+}-{0:0}, at: ksys_write
#1: ffffffffb084f430 (trace_types_lock){+.+.}-{3:3}, at: rb_simple_write
#2: ffffffffb02f5400 (cpu_hotplug_lock){++++}-{0:0}, at: start_per_cpu_kthreads
Link: https://lkml.kernel.org/r/20220919144932.3064014-1-npache@redhat.com
Fixes: c8895e271f ("trace/osnoise: Support hotplug operations")
Signed-off-by: Nico Pache <npache@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
For now, this selftest module can only work in x86 because of the
kprobe cmd was fixed use of x86 registers.
This patch adapted to register names under arm and riscv, So that
this module can be worked on those platform.
Link: https://lkml.kernel.org/r/20220919125629.238242-3-zouyipeng@huawei.com
Cc: <linux-riscv@lists.infradead.org>
Cc: <mingo@redhat.com>
Cc: <paul.walmsley@sifive.com>
Cc: <palmer@dabbelt.com>
Cc: <aou@eecs.berkeley.edu>
Cc: <zanussi@kernel.org>
Cc: <liaochang1@huawei.com>
Cc: <chris.zjh@huawei.com>
Fixes: 64836248dd ("tracing: Add kprobe event command generation test module")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Fixes: bc93e19d08 ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220922070438.586692-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863ba6 ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:
SPI driver mse102x has no spi_device_id for vertexcom,mse1021
SPI driver mse102x has no spi_device_id for vertexcom,mse1022
Add spi_device_id entries to silence the warnings, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220922065717.1448498-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of error, the function get_phy_device() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Fixes: bc93e19d08 ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220922021023.811581-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arun Ramadoss says:
====================
net: dsa: microchip: ksz9477: enable interrupt for internal phy link detection
This patch series implements the common interrupt handling for ksz9477 based
switches and lan937x. The ksz9477 and lan937x has similar interrupt registers
except ksz9477 has 4 port based interrupts whereas lan937x has 6 interrupts.
The patch moves the phy interrupt hanler implemented in lan937x_main.c to
ksz_common.c, along with the mdio_register functionality.
====================
Link: https://lore.kernel.org/r/20220922071028.18012-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Config_intr and handle_interrupt are enabled for ksz9477 phy. It is
similar to all other phys in the micrel phys.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The global port interrupt routines and individual ports interrupt
routines has similar implementation except the mask & status register
and number of nested irqs in them. The mask & status register and
pointer to ksz_device is added to ksz_irq and uses the ksz_irq as
irq_chip_data.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To support the phy link detection through interrupt method for ksz9477
based switch, the interrupt handling routines are moved from
lan937x_main.c to ksz_common.c. The only changes made are functions
names are prefixed with ksz_ instead of lan937x_.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, if the mdio node is not present in the dts file then
lan937x_mdio_register return -ENODEV and entire probing process fails.
To make the mdio_register generic for all ksz series switches and to
maintain back-compatibility with existing dts file, return -ENODEV is
replaced with return 0.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the lan937x_mdio_register function, phy interrupts are enabled
irrespective of irq is enabled in the switch. Now, the check is added to
enable the phy interrupt only if the irq is enabled in the switch.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the number of port irqs is hard coded for the lan937x switch
as 6. In order to make the generic interrupt handler for ksz switches,
number of port irq supported by the switch is added to the
ksz_chip_data. It is 4 for ksz9477, 2 for ksz9897 and 3 for ksz9567.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nf_ct_put need to be called to put the refcount got by tcf_ct_fill_params
to avoid possible refcount leak when tcf_ct_flow_table_get fails.
Fixes: c34b961a24 ("net/sched: act_ct: Create nf flow table per zone")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220923020046.8021-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
taprio_dev_notifier() subscribes to netdev state changes in order to
determine whether interfaces which have a taprio root qdisc have changed
their link speed, so the internal calculations can be adapted properly.
The 'qdev' temporary variable serves no purpose, because we just use it
only once, and can just as well use qdisc_dev(q->root) directly (or the
"dev" that comes from the netdev notifier; this is because qdev is only
interesting if it was the subject of the state change, _and_ its root
qdisc belongs in the taprio list).
The 'found' variable also doesn't really serve too much of a purpose
either; we can just call taprio_set_picos_per_byte() within the loop,
and exit immediately afterwards.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20220923145921.3038904-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add cpumask_nth_{,and,andnot} as wrappers around corresponding
find functions, and use it in cpumask_local_spread().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Kernel lacks for a function that searches for Nth bit in a bitmap.
Usually people do it like this:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
We can do it more efficiently, if we:
1. find a word containing Nth bit, using hweight(); and
2. find the bit, using a helper fns(), that works similarly to
__ffs() and ffz().
fns() is implemented as a simple loop. For x86_64, there's PDEP instruction
to do that: ret = clz(pdep(1 << idx, num)). However, for large bitmaps the
most of improvement comes from using hweight(), so I kept fns() simple.
New find_nth_bit() is ~70 times faster on x86_64/kvm in find_bit benchmark:
find_nth_bit: 7154190 ns, 16411 iterations
for_each_bit: 505493126 ns, 16315 iterations
With all that, a family of 3 new functions is added, and used where
appropriate in the following patches.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The function calculates Hamming weight of (bitmap1 & bitmap2). Now we
have to do like this:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
This requires additional memory, adds pressure on alloc subsystem, and
way less cache-friendly than just:
weight = bitmap_weight_and(map1, map2, nbits);
The following patches apply it for cpumask functions.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
__bitmap_weight() is not to be used directly in the kernel code because
it's a helper for bitmap_weight(). Switch everything to bitmap_weight().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The check_object_size() helper under CONFIG_HARDENED_USERCOPY is designed
to skip any checks where the length is known at compile time as a
reasonable heuristic to avoid "likely known-good" cases. However, it can
only do this when the copy_*_user() helpers are, themselves, inline too.
Using find_vmap_area() requires taking a spinlock. The
check_object_size() helper can call find_vmap_area() when the destination
is in vmap memory. If show_regs() is called in interrupt context, it will
attempt a call to copy_from_user_nmi(), which may call check_object_size()
and then find_vmap_area(). If something in normal context happens to be
in the middle of calling find_vmap_area() (with the spinlock held), the
interrupt handler will hang forever.
The copy_from_user_nmi() call is actually being called with a fixed-size
length, so check_object_size() should never have been called in the first
place. Given the narrow constraints, just replace the
__copy_from_user_inatomic() call with an open-coded version that calls
only into the sanitizers and not check_object_size(), followed by a call
to raw_copy_from_user().
[akpm@linux-foundation.org: no instrument_copy_from_user() in my tree...]
Link: https://lkml.kernel.org/r/20220919201648.2250764-1-keescook@chromium.org
Link: https://lore.kernel.org/all/CAOUHufaPshtKrTWOz7T7QFYUNVGFm0JBjvM700Nhf9qEL9b3EQ@mail.gmail.com
Fixes: 0aef499f31 ("mm/usercopy: Detect vmalloc overruns")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Yu Zhao <yuzhao@google.com>
Reported-by: Florian Lehner <dev@der-flo.net>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Florian Lehner <dev@der-flo.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
set_migratetype_isolate() does not allow isolating MIGRATE_CMA pageblocks
unless it is used for CMA allocation. isolate_single_pageblock() did not
have the same behavior when it is used together with
set_migratetype_isolate() in start_isolate_page_range(). This allows
alloc_contig_range() with migratetype other than MIGRATE_CMA, like
MIGRATE_MOVABLE (used by alloc_contig_pages()), to isolate first and last
pageblock but fail the rest. The failure leads to changing migratetype of
the first and last pageblock to MIGRATE_MOVABLE from MIGRATE_CMA,
corrupting the CMA region. This can happen during gigantic page
allocations.
Like Doug said here:
https://lore.kernel.org/linux-mm/a3363a52-883b-dcd1-b77f-f2bb378d6f2d@gmail.com/T/#u,
for gigantic page allocations, the user would notice no difference,
since the allocation on CMA region will fail as well as it did before.
But it might hurt the performance of device drivers that use CMA, since
CMA region size decreases.
Fix it by passing migratetype into isolate_single_pageblock(), so that
set_migratetype_isolate() used by isolate_single_pageblock() will prevent
the isolation happening.
Link: https://lkml.kernel.org/r/20220914023913.1855924-1-zi.yan@sent.com
Fixes: b2c9e2fbba ("mm: make alloc_contig_range work at pageblock granularity")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: Doug Berger <opendmb@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jakub Kicinski
Yang Yingliang
Pavel Begunkov
Niklas Cassel
Uwe Kleine-König
Xiu Jianfeng
Linus Torvalds
Pavel Machek
Linus Walleij
Ard Biesheuvel
Jesper Dangaard Brouer
ruanjinjie
Vladimir Oltean
Peng Wu
Rafael Mendonca
Andrew Morton
Nico Pache
Yipeng Zou
Wei Yongjun
Arun Ramadoss
Hangyu Hua
Yury Norov
Kees Cook
Zi Yan