Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc7. It's
nothing huge, just a bunch of small fixes of reported problems,
including:
- lots of tiny iio driver fixes
- nvmem driver fixex
- binder UAF bugfix
- uio driver crash fix
- other small fixes
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
Drivers: hv: vmbus: Fix rescind handling in uio_hv_generic
uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind
misc: keba: Fix sysfs group creation
dt-bindings: nvmem: Use soc-nvmem node name instead of nvmem
nvmem: Fix return type of devm_nvmem_device_get() in kerneldoc
nvmem: u-boot-env: error if NVMEM device is too small
misc: fastrpc: Fix double free of 'buf' in error path
binder: fix UAF caused by offsets overwrite
iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
iio: adc: ad7173: fix GPIO device info
iio: adc: ad7124: fix DT configuration parsing
iio: adc: ad_sigma_delta: fix irq_flags on irq request
iio: adc: ads1119: Fix IRQ flags
iio: fix scale application in iio_convert_raw_to_processed_unlocked
iio: adc: ad7124: fix config comparison
iio: adc: ad7124: fix chip ID mismatch
iio: adc: ad7173: Fix incorrect compatible string
iio: buffer-dmaengine: fix releasing dma channel on error
iio: adc: ad7606: remove frstdata check for serial mode
...
The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display from an unknown
OEM used in a number of handheld gaming devices made by Anbernic.
Previously committed using the OEM serial without a vendor prefix,
however following subsequent discussion the preference is to use the
integrating device vendor and name where the OEM is unknown.
There are 4 RG35XX series devices from Anbernic based on an Allwinner
H700 SoC using this panel, with the -Plus variant introduced first.
Therefore the -Plus is used as the fallback for the subsequent -H,
-2024, and -SP devices.
Alter the filename and compatible string to reflect the convention.
Fixes: 45b888a898 ("dt-bindings: display: panel: Add WL-355608-A8 panel")
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-2-ryan@testtoast.com
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.11-rc6. Included in here are:
- dwc3 driver fixes for reported issues
- MAINTAINER file update, marking a driver as unsupported :(
- cdnsp driver fixes
- USB gadget driver fix
- USB sysfs fix
- other tiny fixes
- new device ids for usb serial driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add MeiG Smart SRM825L
usb: cdnsp: fix for Link TRB with TC
usb: dwc3: st: add missing depopulate in probe error path
usb: dwc3: st: fix probed platform device ref count on probe error path
usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)
usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes()
usb: typec: fsa4480: Relax CHIP_ID check
usb: dwc3: xilinx: add missing depopulate in probe error path
usb: dwc3: omap: add missing depopulate in probe error path
dt-bindings: usb: microchip,usb2514: Fix reference USB device schema
usb: gadget: uvc: queue pump work in uvcg_video_enable()
cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI Controller
usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function
usb: dwc3: core: Prevent USB core invalid event buffer address access
MAINTAINERS: Mark UVC gadget driver as orphan
Pull input fixes from Dmitry Torokhov:
- a tweak to uinput interface to reject requests with abnormally large
number of slots. 100 slots/contacts should be enough for real devices
- support for FocalTech FT8201 added to the edt-ft5x06 driver
- tweaks to i8042 to handle more devices that have issue with its
emulation
- Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
840 G2
- other minor fixes
* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: himax_hx83112b - fix incorrect size when reading product ID
Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
Input: uinput - reject requests with unreasonable number of slots
Input: edt-ft5x06 - add support for FocalTech FT8201
dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
Input: adc-joystick - fix optional value handling
Input: synaptics - enable SMBus for HP Elitebook 840 G2
Input: ads7846 - ratelimit the spi_sync error message
Pull devicetree fixes from Rob Herring:
- Fix a possible (but unlikely) out-of-bounds read in interrupts
parsing code
- Add AT25 EEPROM "fujitsu,mb85rs256" compatible
- Update Konrad Dybcio's email
* tag 'devicetree-fixes-for-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: Prevent device address out-of-bounds read in interrupt map walk
dt-bindings: eeprom: at25: add fujitsu,mb85rs256 compatible
dt-bindings: Batch-update Konrad Dybcio's email
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu and xe. The larger amdgpu fix is for a
new IP block introduced in rc1, so should be fine. The xe fixes
contain some missed fixes from the end of the previous round along
with some fixes which required precursor changes, but otherwise
everything seems fine,
mediatek:
- fix cursor crash
amdgpu:
- Fix MES ring buffer overflow
- DCN 3.5 fix
- DCN 3.2.1 fix
- DP MST fix
- Cursor fixes
- JPEG fixes
- Context ops validation
- MES 12 fixes
- VCN 5.0 fix
- HDP fix
panel:
- dt bindings style fix
- orientation quirks
rockchip:
- inno-hdmi: fix infoframe upload
v3d:
- fix OOB access in v3d_csd_job_run()
xe:
- Validate user fence during creation
- Fix use after free when client stats are captured
- SRIOV fixes
- Runtime PM fixes"
* tag 'drm-fixes-2024-08-16' of https://gitlab.freedesktop.org/drm/kernel: (37 commits)
drm/xe: Hold a PM ref when GT TLB invalidations are inflight
drm/xe: Drop xe_gt_tlb_invalidation_wait
drm/xe: Add xe_gt_tlb_invalidation_fence_init helper
drm/xe/pf: Fix VF config validation on multi-GT platforms
drm/xe: Build PM into GuC CT layer
drm/xe/vf: Fix register value lookup
drm/xe: Fix use after free when client stats are captured
drm/xe: Take a ref to xe file when user creates a VM
drm/xe: Add ref counting for xe_file
drm/xe: Move part of xe_file cleanup to a helper
drm/xe: Validate user fence during creation
drm/rockchip: inno-hdmi: Fix infoframe upload
drm/amd/amdgpu: add HDP_SD support on gc 12.0.0/1
drm/amdgpu: Update kmd_fw_shared for VCN5
drm/amd/amdgpu: command submission parser for JPEG
drm/amdgpu/mes12: fix suspend issue
drm/amdgpu/mes12: sw/hw fini for unified mes
drm/amdgpu/mes12: configure two pipes hardware resources
drm/amdgpu/mes12: adjust mes12 sw/hw init for multiple pipes
drm/amdgpu/mes12: add mes pipe switch support
...
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless and netfilter
Current release - regressions:
- udp: fall back to software USO if IPv6 extension headers are
present
- wifi: iwlwifi: correctly lookup DMA address in SG table
Current release - new code bugs:
- eth: mlx5e: fix queue stats access to non-existing channels splat
Previous releases - regressions:
- eth: mlx5e: take state lock during tx timeout reporter
- eth: mlxbf_gige: disable RX filters until RX path initialized
- eth: igc: fix reset adapter logics when tx mode change
Previous releases - always broken:
- tcp: update window clamping condition
- netfilter:
- nf_queue: drop packets with cloned unconfirmed conntracks
- nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
- vsock: fix recursive ->recvmsg calls
- dsa: vsc73xx: fix MDIO bus access and PHY opera
- eth: gtp: pull network headers in gtp_dev_xmit()
- eth: igc: fix packet still tx after gate close by reducing i226 MAC
retry buffer
- eth: mana: fix RX buf alloc_size alignment and atomic op panic
- eth: hns3: fix a deadlock problem when config TC during resetting"
* tag 'net-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net: hns3: use correct release function during uninitialization
net: hns3: void array out of bound when loop tnl_num
net: hns3: fix a deadlock problem when config TC during resetting
net: hns3: use the user's cfg after reset
net: hns3: fix wrong use of semaphore up
selftests: net: lib: kill PIDs before del netns
pse-core: Conditionally set current limit during PI regulator registration
net: thunder_bgx: Fix netdev structure allocation
net: ethtool: Allow write mechanism of LPL and both LPL and EPL
vsock: fix recursive ->recvmsg calls
selftest: af_unix: Fix kselftest compilation warnings
netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
netfilter: nf_tables: Introduce nf_tables_getobj_single
netfilter: nf_tables: Audit log dump reset after the fact
selftests: netfilter: add test for br_netfilter+conntrack+queue combination
netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
netfilter: flowtable: initialise extack before use
netfilter: nfnetlink: Initialise extack before use in ACKs
netfilter: allow ipv6 fragments to arrive on different devices
tcp: Update window clamping condition
...
Add missed property phys, which indicate how connect to serdes phy.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: fsl-mc@80c000000: dpmacs:ethernet@7: Unevaluated properties are not allowed ('phys' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for reported issues for
6.11-rc3. Included in here are:
- usb serial driver MODULE_DESCRIPTION() updates
- usb serial driver fixes
- typec driver fixes
- usb-ip driver fix
- gadget driver fixes
- dt binding update
All of these have been in linux-next with no reported issues"
* tag 'usb-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix a deadlock in ucsi_send_command_common()
usb: typec: tcpm: avoid sink goto SNK_UNATTACHED state if not received source capability message
usb: gadget: f_fs: pull out f->disable() from ffs_func_set_alt()
usb: gadget: f_fs: restore ffs_func_disable() functionality
USB: serial: debug: do not echo input by default
usb: typec: tipd: Delete extra semi-colon
usb: typec: tipd: Fix dereferencing freeing memory in tps6598x_apply_patch()
usb: gadget: u_serial: Set start_delayed during suspend
usb: typec: tcpci: Fix error code in tcpci_check_std_output_cap()
usb: typec: fsa4480: Check if the chip is really there
usb: gadget: core: Check for unset descriptor
usb: vhci-hcd: Do not drop references before new references are gained
usb: gadget: u_audio: Check return codes from usb_ep_enable and config_ep_by_speed.
usb: gadget: midi2: Fix the response for FB info with block 0xff
dt-bindings: usb: microchip,usb2514: Add USB2517 compatible
USB: serial: garmin_gps: use struct_size() to allocate pkt
USB: serial: garmin_gps: annotate struct garmin_packet with __counted_by
USB: serial: add missing MODULE_DESCRIPTION() macros
USB: serial: spcp8x5: remove unused struct 'spcp8x5_usb_ctrl_arg'
Pull drm fixes from Dave Airlie:
"Weekly regular fixes, mostly amdgpu with i915/xe having a few each,
and then some misc bits across the board, seems about right for rc3
time.
client:
- fix null ptr deref
bridge:
- connector: fix double free
atomic:
- fix async flip update
panel:
- document panel
omap:
- add config dependency
tests:
- fix gem shmem test
drm buddy:
- Add start address to trim function
amdgpu:
- DMCUB fix
- Fix DET programming on some DCNs
- DCC fixes
- DCN 4.0.1 fixes
- SMU 14.0.x update
- MMHUB fix
- DCN 3.1.4 fix
- GC 12.0 fixes
- Fix soft recovery error propogation
- SDMA 7.0 fixes
- DSC fix
xe:
- Fix off-by-one when processing RTP rules
- Use dma_fence_chain_free in chain fence unused as a sync
- Fix PL1 disable flow in xe_hwmon_power_max_write
- Take ref to VM in delayed dump snapshot
i915:
- correct dual pps handling for MTL_PCH+ [display]
- Adjust vma offset for framebuffer mmap offset [gem]
- Fix Virtual Memory mapping boundaries calculation [gem]
- Allow evicting to use the requested placement
- Attempt to get pages without eviction first"
* tag 'drm-fixes-2024-08-10' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
drm/xe: Take ref to VM in delayed snapshot
drm/xe/hwmon: Fix PL1 disable flow in xe_hwmon_power_max_write
drm/xe: Use dma_fence_chain_free in chain fence unused as a sync
drm/xe/rtp: Fix off-by-one when processing rules
drm/amdgpu: Add DCC GFX12 flag to enable address alignment
drm/amdgpu: correct sdma7 max dw
drm/amdgpu: Add address alignment support to DCC buffers
drm/amd/display: Skip Recompute DSC Params if no Stream on Link
drm/amdgpu: change non-dcc buffer copy configuration
drm/amdgpu: Forward soft recovery errors to userspace
drm/amdgpu: add golden setting for gc v12
drm/buddy: Add start address support to trim function
drm/amd/display: Add missing program DET segment call to pipe init
drm/amd/display: Add missing DCN314 to the DML Makefile
drm/amdgpu: force to use legacy inv in mmhub
drm/amd/pm: update powerplay structure on smu v14.0.2/3
drm/amd/display: Add missing mcache registers
drm/amd/display: Add dcc propagation value
drm/amd/display: Add missing DET segments programming
drm/amd/display: Replace dm_execute_dmub_cmd with dc_wake_and_execute_dmub_cmd
...
ASoC: Fixes for v6.11
Quite a lot of fixes have come in since the merge window, there's some
repetitive fixes over the Qualcomm drivers increasing the patch count,
along with a large batch of fixes from Cirrus. We also have some quirks
and some individual fixes.
The Rockchip variant of the dwc-ahci controller does have and need power-
domains to work, though the binding does not mention them, making dtccheck
quite unhappy:
DTC_CHK arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dtb
/home/devel/hstuebner/00_git-repos/linux-rockchip/_build-arm64/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dtb: sata@fc800000: Unevaluated properties are not allowed ('power-domains' was unexpected)
from schema $id: http://devicetree.org/schemas/ata/rockchip,dwc-ahci.yaml#
Fix that by adding the missing power-domain property to the binding.
Fixes: 85b0e13b19 ("dt-bindings: ata: dwc-ahci: add Rockchip RK3588")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Pull more devicetree updates from Rob Herring:
"Most of this is a treewide change to of_property_for_each_u32() which
was small enough to do in one go before rc1 and avoids the need to
create of_property_for_each_u32_some_new_name().
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property"
* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
of: remove internal arguments from of_property_for_each_u32()
dt-bindings: watchdog: add support for Amlogic A4 SoCs
Pull spi fixes from Mark Brown:
"The bulk of this is a series of fixes for the microchip-core driver
mostly originating from one of their customers, I also applied an
additional patch adding support for controlling the word size which
came along with it since it's still the merge window and clearly had a
bunch of fairly thorough testing.
We also have a fix for the compatible used to bind spidev to the
BH2228FV"
* tag 'spi-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: add correct compatible for Rohm BH2228FV
dt-bindings: trivial-devices: fix Rohm BH2228FV compatible string
spi: microchip-core: add support for word sizes of 1 to 32 bits
spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer
spi: microchip-core: fix init function not setting the master and motorola modes
spi: microchip-core: only disable SPI controller when register value change requires it
spi: microchip-core: defer asserting chip select until just before write to TX FIFO
spi: microchip-core: fix the issues in the isr
Pull i3c updates from Alexandre Belloni:
"This cycle, there are new features for the Designware controller and
fixes for the other IPs:
- dw: optional apb clock and power management support, IBI handling
fixes
- mipi-i3c-hci: IBI handling fixes
- svc: a few fixes"
* tag 'i3c/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
dt-bindings: i3c: add header for generic I3C flags
i3c: master: svc: Fix error code in svc_i3c_master_do_daa_locked()
i3c: master: Enhance i3c_bus_type visibility for device searching & event monitoring
i3c: dw: Add power management support
i3c: dw: Add some functions for reusability
i3c: dw: Save timing registers and other values
i3c: master: svc: Improve DAA STOP handle code logic
i3c: dw: Add optional apb clock
i3c: dw: Use new *_enabled clk API
dt-bindings: i3c: dw: Add apb clock binding
i3c: master: svc: Convert comma to semicolon
i3c: mipi-i3c-hci: Round IBI data chunk size to HW supported value
i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup
i3c: mipi-i3c-hci: Set IBI Status and Data Ring base addresses
i3c: mipi-i3c-hci: Switch to lower_32_bits()/upper_32_bits() helpers
i3c: dw: Remove ibi_capable property
i3c: dw: Fix IBI intr programming
i3c: dw: Fix clearing queue thld
i3c: mipi-i3c-hci: Fix number of DAT/DCT entries for HCI versions < 1.1
i3c: master: svc: resend target address when get NACK
Pull misc hotfixes from Andrew Morton:
"11 hotfixes, 7 of which are cc:stable. 7 are MM, 4 are other"
* tag 'mm-hotfixes-stable-2024-07-26-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: handle inconsistent state in nilfs_btnode_create_block()
selftests/mm: skip test for non-LPA2 and non-LVA systems
mm/page_alloc: fix pcp->count race between drain_pages_zone() vs __rmqueue_pcplist()
mm: memcg: add cacheline padding after lruvec in mem_cgroup_per_node
alloc_tag: outline and export free_reserved_page()
decompress_bunzip2: fix rare decompression failure
mm/huge_memory: avoid PMD-size page cache if needed
mm: huge_memory: use !CONFIG_64BIT to relax huge page alignment on 32 bit machines
mm: fix old/young bit handling in the faulting path
dt-bindings: arm: update James Clark's email address
MAINTAINERS: mailmap: update James Clark's email address
The 'single-channel' property is an uint32, not an array, so 'items' is
an incorrect constraint. This didn't matter until dtschema recently
changed how properties are decoded. This results in this warning:
Documentation/devicetree/bindings/iio/adc/adi,ad7192.example.dtb: adc@0: \
channel@1:single-channel: 1 is not of type 'array'
Fixes: caf7b7632b ("dt-bindings: iio: adc: ad7192: Add AD7194 support")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240723230904.1299744-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull drm fixes from Dave Airlie:
"Fixes for rc1, mostly amdgpu, i915 and xe, with some other misc ones,
doesn't seem to be anything too serious.
amdgpu:
- Bump driver version for GFX12 DCC
- DC documention warning fixes
- VCN unified queue power fix
- SMU fix
- RAS fix
- Display corruption fix
- SDMA 5.2 workaround
- GFX12 fixes
- Uninitialized variable fix
- VCN/JPEG 4.0.3 fixes
- Misc display fixes
- RAS fixes
- VCN4/5 harvest fix
- GPU reset fix
i915:
- Reset intel_dp->link_trained before retraining the link
- Don't switch the LTTPR mode on an active link
- Do not consider preemption during execlists_dequeue for gen8
- Allow NULL memory region
xe:
- xe_exec ioctl minor fix on sync entry cleanup upon error
- SRIOV: limit VF LMEM provisioning
- Wedge mode fixes
v3d:
- fix indirect dispatch on newer v3d revs
panel:
- fix panel backlight bindings"
* tag 'drm-next-2024-07-26' of https://gitlab.freedesktop.org/drm/kernel: (39 commits)
drm/amdgpu: reset vm state machine after gpu reset(vram lost)
drm/amdgpu: add missed harvest check for VCN IP v4/v5
drm/amdgpu: Fix eeprom max record count
drm/amdgpu: fix ras UE error injection failure issue
drm/amd/display: Remove ASSERT if significance is zero in math_ceil2
drm/amd/display: Check for NULL pointer
drm/amdgpu/vcn: Use offsets local to VCN/JPEG in VF
drm/amdgpu: Add empty HDP flush function to VCN v4.0.3
drm/amdgpu: Add empty HDP flush function to JPEG v4.0.3
drm/amd/amdgpu: Fix uninitialized variable warnings
drm/amdgpu: Fix atomics on GFX12
drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell
drm/i915: Allow NULL memory region
drm/i915/gt: Do not consider preemption during execlists_dequeue for gen8
dt-bindings: display: panel: samsung,atna33xc20: Document ATNA45AF01
drm/xe: Don't suspend device upon wedge
drm/xe: Wedge the entire device
drm/xe/pf: Limit fair VF LMEM provisioning
drm/xe/exec: Fix minor bug related to xe_sync_entry_cleanup
drm/amd/display: fix corruption with high refresh rates on DCN 3.0
...
Pull watchdog updates from Wim Van Sebroeck:
- make watchdog_class const
- rework of the rzg2l_wdt driver
- other small fixes and improvements
* tag 'linux-watchdog-6.11-rc1' of git://www.linux-watchdog.org/linux-watchdog:
dt-bindings: watchdog: dlg,da9062-watchdog: Drop blank space
watchdog: rzn1: Convert comma to semicolon
watchdog: lenovo_se10_wdt: Convert comma to semicolon
dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
watchdog: rzg2l_wdt: Add suspend/resume support
watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
watchdog: rzg2l_wdt: Remove comparison with zero
watchdog: rzg2l_wdt: Remove reset de-assert from probe
watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
watchdog: rzg2l_wdt: Make the driver depend on PM
watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011
watchdog: imx7ulp_wdt: keep already running watchdog enabled
watchdog: starfive: Add missing clk_disable_unprepare()
watchdog: Make watchdog_class const
Pull dmaengine updates from Vinod Koul:
"New support:
- New dmaengine_prep_peripheral_dma_vec() to support transfers using
dma vectors and documentation and user in AXI dma
- STMicro STM32 DMA3 support and new capabilities of cyclic dma
Updates:
- Yaml conversion for Freescale imx dma and qdma bindings,
sprd sc9860 dma binding
- Altera msgdma updates for descriptor management"
* tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dt-bindings: fsl-qdma: fix interrupts 'if' check logic
dt-bindings: dma: sprd,sc9860-dma: convert to YAML
dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: add missing MODULE_DESCRIPTION() macros
dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro
dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels
dmaengine: sh: rz-dmac: Fix lockdep assert warning
dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan()
dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM
dmaengine: qcom: gpi: remove unused struct 'reg_info'
dmaengine: moxart-dma: remove unused struct 'moxart_filter_data'
dt-bindings: fsl-qdma: Convert to yaml format
dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan
dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated
dmaengine: stm32-dma3: defer channel registration to specify channel name
dmaengine: add channel device name to channel registration
dmaengine: stm32-dma3: improve residue granularity
dmaengine: stm32-dma3: add device_pause and device_resume ops
dmaengine: stm32-dma3: add DMA_MEMCPY capability
...
Pull remoteproc updates from Bjorn Andersson:
- The maximum amount of DDR memory used by the Mediatek MT8188/MT8195
SCP is increased to handle new use cases. Handling of optional L1TCM
memory is made actually optional.
- An optimization is introduced to only clear the unused portion of IPI
shared buffers, rather than the entire buffer before writing the
message.
- Detection for IPC-only mode in the TI K3 DSP remoteproc driver is
corrected. The loglevel of a debug print in the same is lowered from
error.
- Support for attaching to an running remote processor is added to the
Xilinx R5F.
- An in-kernel implementation of the Qualcomm "protected domain mapper"
(aka service registry) service is introduced, to remove the
dependency on a userspace implementation to detect when the battery
monitor and USB Type-C port manager becomes available. This is then
integrated with the Qualcomm remoteproc driver.
- The Qualcomm PAS remoteproc driver gains support for attempting to
bust hwspinlocks held by the remote processor when it
crashed/stopped.
- The TI OMAP remoteproc driver is transitioned to use devres helpers
for various forms of allocations.
- Parsing of memory-regions in the i.MX remoteproc driver is improved
to avoid a NULL pointer dereference if the phandle reference is
empty. of_node reference counting is corrected in the same.
* tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size
remoteproc: k3-dsp: Fix log levels where appropriate
remoteproc: xlnx: Add attach detach support
remoteproc: qcom: select AUXILIARY_BUS
remoteproc: k3-r5: Fix IPC-only mode detection
remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
remoteproc: qcom: enable in-kernel PD mapper
dt-bindings: remoteproc: imx_rproc: Add minItems for power-domain
remoteproc: imx_rproc: Fix refcount mistake in imx_rproc_addr_init
remoteproc: omap: Use devm_rproc_add() helper
remoteproc: omap: Use devm action to release reserved memory
remoteproc: omap: Use devm_rproc_alloc() helper
remoteproc: imx_rproc: Skip over memory region when node value is NULL
dt-bindings: remoteproc: k3-dsp: Correct optional sram properties for AM62A SoCs
remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
remoteproc: mediatek: Zero out only remaining bytes of IPI buffer
Pull more i2c updates from Wolfram Sang:
"The I2C core has two header documentation updates as the dependecies
are in now.
The I2C host drivers add some patches which nearly fell through the
cracks:
- Added descriptions in the DTS for the Qualcomm SM8650 and SM8550
Camera Control Interface (CCI).
- Added support for the "settle-time-us" property, which allows the
gpio-mux device to switch from one bus to another with a
configurable delay. The time can be set in the DTS. The latest
change also includes file sorting.
- Fixed slot numbering in the SMBus framework to prevent failures
when more than 8 slots are occupied. It now enforces a a maximum of
8 slots to be used. This ensures that the Intel PIIX4 device can
register the SPDs correctly without failure, even if other slots
are populated but not used"
* tag 'i2c-for-6.11-rc1-second-batch' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: header: improve kdoc for i2c_algorithm
i2c: header: remove unneeded stuff regarding i2c_algorithm
i2c: piix4: Register SPDs
i2c: smbus: remove i801 assumptions from SPD probing
i2c: mux: gpio: Add support for the 'settle-time-us' property
i2c: mux: gpio: Re-order #include to match alphabetic order
dt-bindings: i2c: mux-gpio: Add 'settle-time-us' property
dt-bindings: i2c: qcom-cci: Document sm8650 compatible
dt-bindings: i2c: qcom-cci: Document sm8550 compatible
Pull interrupt subsystem updates from Thomas Gleixner:
"Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to
expand any of this for new required functionality.
The new function takes a pointer to a data structure as argument.
The data structure combines all existing parameters and allows for
easy extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization
before the new domain is published, so that concurrent usage sites
won't see a half initialized interrupt domain. Similar problems
exist on teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible
workarounds at the driver level.
- The usual small improvements all over the place
Drivers:
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version
to allow building the latter as a module for multi-platform
kernels
- Enable MSI support for Armada 370XP on platforms which do not
support IPIs
- The usual small fixes and enhancements all over the place"
* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
irqdomain: Fix the kernel-doc and plug it into Documentation
genirq: Set IRQF_COND_ONESHOT in request_irq()
irqchip/imx-irqsteer: Handle runtime power management correctly
irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
irqchip/gic-v4: Always configure affinity on VPE activation
Revert "irqchip/dw-apb-ictl: Support building as module"
Revert "Loongarch: Support loongarch avec"
arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
ARM: stm32: Allow build irq-stm32mp-exti driver as module
irqchip/stm32mp-exti: Allow building as module
irqchip/stm32mp-exti: Rename internal symbols
irqchip/stm32-exti: Split MCU and MPU code
arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
irqchip/dw-apb-ictl: Support building as module
irqchip/riscv-aplic: Simplify the initialization code
...
The Samsung ATNA45AF01 panel is an AMOLED eDP panel that has backlight
control over the DP AUX channel. While it works almost correctly with the
generic "edp-panel" compatible, the backlight needs special handling to
work correctly. It is similar to the existing ATNA33XC20 panel, just with
a larger resolution and size.
Add a new "samsung,atna45af01" compatible to describe this panel in the DT.
Use the existing "samsung,atna33xc20" as fallback compatible since existing
drivers should work as-is, given that resolution and size are discoverable
through the eDP link.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240715-x1e80100-crd-backlight-v2-1-31b7f2f658a3@linaro.org
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add missing MODULE_DESCRIPTION() macro
- fix offset addition for alarms
Drivers:
- isl1208: alarm clearing fixes
- mcp794xx: oscillator failure detection
- stm32: stm32mp25 support
- tps6594: power management support"
* tag 'rtc-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: stm32: add new st,stm32mp25-rtc compatible and check RIF configuration
dt-bindings: rtc: stm32: introduce new st,stm32mp25-rtc compatible
rtc: Drop explicit initialization of struct i2c_device_id::driver_data to 0
rtc: interface: Add RTC offset to alarm after fix-up
rtc: ds1307: Clamp year to valid BCD (0-99) in `set_time()`
rtc: ds1307: Detect oscillator fail on mcp794xx
rtc: isl1208: Update correct procedure for clearing alarm
rtc: isl1208: Add a delay for clearing alarm
dt-bindings: rtc: Convert rtc-fsl-ftm-alarm.txt to yaml format
rtc: add missing MODULE_DESCRIPTION() macro
rtc: abx80x: Fix return value of nvmem callback on read
rtc: cmos: Fix return value of nvmem callbacks
rtc: isl1208: Fix return value of nvmem callbacks
rtc: tps6594: Add power management support
rtc: tps6594: introduce private structure as drvdata
rtc: tps6594: Fix memleak in probe
Pull pin control updates from Linus Walleij:
"Some new drivers is the main part, the rest is cleanups and nonurgent
fixes.
Nothing much special about this, no core changes this time.
New drivers:
- Renesas RZ/V2H(P) SoC
- NXP Freescale i.MX91 SoC
- Nuvoton MA35D1 SoC
- Qualcomm PMC8380, SM4250, SM4250 LPI
Enhancements:
- A slew of scoped-based simplifications of of_node_put()"
* tag 'pinctrl-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits)
pinctrl: renesas: rzg2l: Support output enable on RZ/G2L
pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions
pinctrl: renesas: rzg2l: Clarify OEN read/write support
dt-bindings: pinctrl: pinctrl-single: Fix pinctrl-single,gpio-range description
dt-bindings: pinctrl: npcm8xx: add missing pin group and mux function
dt-bindings: pinctrl: pinctrl-single: fix schmitt related properties
pinctrl: freescale: Use scope based of_node_put() cleanups
pinctrl: equilibrium: Use scope based of_node_put() cleanups
pinctrl: ti: iodelay: Use scope based of_node_put() cleanups
pinctrl: qcom: lpass-lpi: increase MAX_NR_GPIO to 32
pinctrl: cy8c95x0: Update cache modification
pinctrl: cy8c95x0: Use cleanup.h
pinctrl: renesas: r8a779h0: Remove unneeded separators
pinctrl: renesas: r8a779g0: Add INTC-EX pins, groups, and function
pinctrl: renesas: r8a779g0: Remove unneeded separators
pinctrl: renesas: r8a779h0: Add AVB MII pins and groups
pinctrl: renesas: r8a779g0: Fix TPU suffixes
pinctrl: renesas: r8a779g0: Fix TCLK suffixes
pinctrl: renesas: r8a779g0: FIX PWM suffixes
pinctrl: renesas: r8a779g0: Fix IRQ suffixes
...
Pull MTD updates from Miquel Raynal:
"Nothing stands out for this merge window, mostly minor fixes, such as
module descriptions, the use of debug macros and Makefile
improvements.
Raw NAND changes;
- The Freescale MXC driver has been converted to the newer
'->exec_op()' interface
- The meson driver now supports handling the boot ROM area with very
specific ECC needs
- Support for the iMX8QXP has been added to the GPMI driver
- The lpx32xx driver now can get the DMA channels using DT entries
- The Qcom binding has been improved to be more future proof by Rob
- And then there is the usual load of misc and minor changes
SPI-NAND changes:
- The Macronix vendor driver has been improved to support an extended
ID to avoid conflicting with older devices after an ID reuse issue
SPI NOR changes:
- Drop support for Xilinx S3AN flashes. These flashes are for the
very old Xilinx Spartan 3 FPGAs and they need some awkward code in
the core to support.
Drop support for these flashes, along with the special handling we
needed for them in the core like non-power-of-2 page size handling
and the .setup() callback.
- Fix regression for old w25q128 flashes without SFDP tables.
Commit 83e824a4a5 ("mtd: spi-nor: Correct flags for Winbond
w25q128") dropped support for such devices under the assumption
that they aren't being used anymore. Users have now surfaced [0] so
fix the regression by supporting both kind of devices.
- Core cleanups including removal of SPI_NOR_NO_FR flag and
simplification of spi_nor_get_flash_info()"
Link: https://lore.kernel.org/r/CALxbwRo_-9CaJmt7r7ELgu+vOcgk=xZcGHobnKf=oT2=u4d4aA@mail.gmail.com/ [0]
* tag 'mtd/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (28 commits)
mtd: rawnand: lpx32xx: Fix dma_request_chan() error checks
mtd: spinand: macronix: Add support for serial NAND flash
mtd: spinand: macronix: Add support for reading Device ID 2
mtd: rawnand: lpx32xx: Request DMA channels using DT entries
dt-bindings: mtd: qcom,nandc: Define properties at top-level
mtd: rawnand: intel: use 'time_left' variable with wait_for_completion_timeout()
mtd: rawnand: mxc: use 'time_left' variable with wait_for_completion_timeout()
mtd: rawnand: gpmi: add iMX8QXP support.
mtd: rawnand: gpmi: add 'support_edo_timing' in gpmi_devdata
mtd: cmdlinepart: Replace `dbg()` macro with `pr_debug()`
mtd: add missing MODULE_DESCRIPTION() macros
mtd: make mtd_test.c a separate module
dt-bindings: mtd: gpmi-nand: Add 'fsl,imx8qxp-gpmi-nand' compatible string
mtd: rawnand: cadence: remove unused struct 'ecc_info'
mtd: rawnand: mxc: support software ECC
mtd: rawnand: mxc: implement exec_op
mtd: rawnand: mxc: separate page read from ecc calc
mtd: spi-nor: winbond: fix w25q128 regression
mtd: spi-nor: simplify spi_nor_get_flash_info()
mtd: spi-nor: get rid of SPI_NOR_NO_FR
...
