Saeed Mahameed says:
====================
mlx5-update-2017-05-23
First patch from Leon, came to remove the redundant usage of mlx5_vzalloc,
and directly use kvzalloc across all mlx5 drivers.
2nd patch from Noa, adds new device IDs into the supported devices list.
3rd and 4th patches from Ilan are adding the basic infrastructure and
support for Mellanox's mlx5 FPGA.
Last two patches from Tariq came to modify the outdated driver version
reported in ethtool and in mlx5_ib to more reflect the current driver state
and remove the redundant date string reported in the version.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Current API between qed and protocol modules allows passing an
additional private string - but it doesn't get utilized by qed
anywhere.
Clarify the API by removing it and renaming it 'set_name'.
CC: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace meaningless logged print ('Ending successfully qede probe')
with a single-liner containing interesting information about probed
device.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass additional information about package installed on persistent memory
so that protocol drivers would be able to log it.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we're closing the parser searching for RDMA when stoping the
fastpath, we need to re-enable it when starting the fastpath once again.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Today, driver has a synchronization point while closing
the device which synchronizes its slowpath interrupt line.
However, that's insufficient as that ISR would schedule the
slowpath-tasklet - so even after ISR is over it's possible the
handling of the interrupt has not completed.
By doing a disable/enable on the taskelt we guarantee that all
HW events that should no longer be genereated from that point
onward in the flow are truly behind us.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case nvram layout of board is incorrect, board may exhibit peculiar
oddities. Log such a rare event.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Flows configuring tunnel ports in HW use the main_ptt which should
be reserved for core-functionality.
Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Solves the following warning in qede -
- Several cases of missing cpu_to_le16() conversions
- Adds 'static' to one function declaration
- Removes dcbnl operation that's currently getting populated twice
Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of busy poll, napi_complete_done returns false and does not
dequeue napi. In this case do not unmask the intr. We are guaranteed
napi is called again. This reduces unnecessary iowrites.
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
State of autonegotiation may have changed but is not yet refreshed.
Make sure ethtool respects the NFP_PORT_CHANGED flag when looking
at autoneg.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If reading new state of the port failed, mark the port back as CHANGED.
This way next user state request will trigger refresh, which will
hopefully succeed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After port configuration is performed mark it as changed. This
will close a window of time between configuration and async
state refresh which runs from a workqueue where old port state
would be reported.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add link to nfp_ports to make it possible to iterate over all ports.
This will come in handy when some ports may be representors.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Track whether physical port's state have changed since last refresh
inside the nfp_port structure instead of the vNIC structure.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Always updating port state in place by overriding values in exiting
pf->eth_tbl makes things easier to manage and allows us to have a
common helper for both full and per-port refresh.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Encapsulate port information into struct nfp_port. nfp_port will
soon be extended to contain devlink_port information. It also makes
it easier to reuse port-related code between vNICs and representors.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We only support core NIC apps which have vNICs for each physical port/
split and no representors right now. Enforce that either each vNIC has
a NSP eth_table entry or if NSP port table is not available none do.
One scenario this will prevent from happening is user force-loading
wrong firmware file if FW app requires different firmwares per media
config.
While at it move some code to nfp_net_pf_alloc_vnic() to make it
counter-match nfp_net_pf_free_vnic() better.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a concept of an application. For now it's just grouping
pointers and serving as a layer of indirection. It will help us
weaken the dependency on nfp_net in ethtool code. Later series
will flesh out support for different apps in the driver.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vNIC is a PCIe-side abstraction NFP firmwares supported by this
driver use. It was initially meant to represent a device port
and therefore a netdev but today should be thought of as a way
of grouping descriptor rings and associated state. Advanced apps
will have vNICs without netdevs and ports without a vNIC (using
representors instead).
Make sure code refers to vNICs as vNICs and not ports or netdevs.
No functional changes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct nfp_net represents a vNIC, we will be moving away from the
requirement for every vNIC to have a netdev associated with it.
Remove "netdev" from some function names and prefer passing
struct nfp_net pointer as argument instead of struct net_device *.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit dc9c4d0fe0, the arp_target array moved from a static global
to a local variable. By the nature of static globals, the array used to
be initialized to all 0. At present, it's full of random data, which
that gets interpreted as arp_target values, when none have actually been
specified. Systems end up booting with spew along these lines:
[ 32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[ 32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[ 32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0
[ 32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[ 32.204892] lacp0: Setting MII monitoring interval to 100
[ 32.211071] lacp0: Removing ARP target 216.124.228.17
[ 32.216824] lacp0: Removing ARP target 218.160.255.255
[ 32.222646] lacp0: Removing ARP target 185.170.136.184
[ 32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal
[ 32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[ 32.243987] lacp0: Removing ARP target 56.125.228.17
[ 32.249625] lacp0: Removing ARP target 218.160.255.255
[ 32.255432] lacp0: Removing ARP target 15.157.233.184
[ 32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal
[ 32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[ 32.276632] lacp0: Removing ARP target 16.0.0.0
[ 32.281755] lacp0: Removing ARP target 218.160.255.255
[ 32.287567] lacp0: Removing ARP target 72.125.228.17
[ 32.293165] lacp0: Removing ARP target 218.160.255.255
[ 32.298970] lacp0: Removing ARP target 8.125.228.17
[ 32.304458] lacp0: Removing ARP target 218.160.255.255
None of these were actually specified as ARP targets, and the driver does
seem to clean up the mess okay, but it's rather noisy and confusing, leaks
values to userspace, and the 255.255.255.255 spew shows up even when debug
prints are disabled.
The fix: just zero out arp_target at init time.
While we're in here, init arp_all_targets_value in the right place.
Fixes: dc9c4d0fe0 ("bonding: reduce scope of some global variables")
CC: Mahesh Bandewar <maheshb@google.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
sizeof(priv->ucc_pram) is 4 as it is the size of a pointer, but we want
to reserve space for the struct ucc_hdlc_param.
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As of 7bb11dc9f5 and 0622cab034, bond slaves in a 3ad bond are not
removed from the aggregator when they are down, and the active slave count
is NOT equal to number of ports in the aggregator, but rather the number
of ports in the aggregator that are still enabled. The sysfs spew for
bonding_show_ad_num_ports() has a comment that says "Show number of active
802.3ad ports.", but it's currently showing total number of ports, both
active and inactive. Remedy it by using the same logic introduced in
0622cab034 in __bond_3ad_get_active_agg_info(), so sysfs, procfs and
netlink all report the number of active ports. Note that this means that
IFLA_BOND_AD_INFO_NUM_PORTS really means NUM_ACTIVE_PORTS instead of
NUM_PORTS, and thus perhaps should be renamed for clarity.
Lightly tested on a dual i40e lacp bond, simulating link downs with an ip
link set dev <slave2> down, was able to produce the state where I could
see both in the same aggregator, but a number of ports count of 1.
MII Status: up
Active Aggregator Info:
Aggregator ID: 1
Number of ports: 2 <---
Slave Interface: ens10
MII Status: up <---
Aggregator ID: 1
Slave Interface: ens11
MII Status: up
Aggregator ID: 1
MII Status: up
Active Aggregator Info:
Aggregator ID: 1
Number of ports: 1 <---
Slave Interface: ens10
MII Status: down <---
Aggregator ID: 1
Slave Interface: ens11
MII Status: up
Aggregator ID: 1
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If dma mask checks fail in atl2_probe(), it breaks off initialization,
deallocates all resources, but returns zero.
The patch adds proper error code return value and
make error code setup unified.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
The macsec implementation shouldn't account for rx/tx packets that are
dropped in the netdev framework. The netdev framework itself accounts
for such packets by atomically updating struct net_device`rx_dropped and
struct net_device`tx_dropped fields. Later on when the stats for macsec
link is retrieved, the packets dropped in netdev framework will be
included in dev_get_stats() after calling macsec.c`macsec_get_stats64()
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some drivers were calling the skb_tx_timestamp() function only when
a hardware timestamp was not requested. Now that applications can use
the SOF_TIMESTAMPING_OPT_TX_SWHW option to request both software and
hardware timestamps, the drivers need to be modified to unconditionally
call skb_tx_timestamp().
CC: Richard Cochran <richardcochran@gmail.com>
CC: Willem de Bruijn <willemb@google.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include HWTSTAMP_FILTER_NTP_ALL in net_hwtstamp_validate() as a valid
filter and update drivers which can timestamp all packets, or which
explicitly list unsupported filters instead of using a default case, to
handle the filter.
CC: Richard Cochran <richardcochran@gmail.com>
CC: Willem de Bruijn <willemb@google.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When TX checksum offload is used, if the computed checksum is 0 the
LAN95xx device do not alter the checksum to 0xffff. In the case of ipv4
UDP checksum, it indicates to receiver that no checksum is calculated.
Under ipv6, UDP checksum yields a result of zero must be changed to
0xffff. Hence disabling checksum offload for ipv6 packets.
Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Reported-by: popcorn mix <popcornmix@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
issue get port information command to firmware to retrieve port
information and update if it is different from what was last
recorded and also add indication for supported link modes for
firmware port types FW_PORT_TYPE_SFP28, FW_PORT_TYPE_KR_SFP28,
FW_PORT_TYPE_CR4_QSFP.
Based on the original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current largesend and checksum offload feature in ibmveth driver,
- Source VM sends the TCP packets with ip_summed field set as
CHECKSUM_PARTIAL and TCP pseudo header checksum is placed in
checksum field
- CHECKSUM_PARTIAL flag in SKB will enable ibmveth driver to mark
"no checksum" and "checksum good" bits in transmit buffer descriptor
before the packet is delivered to pseries PowerVM Hypervisor
- If ibmveth has largesend capability enabled, transmit buffer descriptors
are market accordingly before packet is delivered to Hypervisor
(along with mss value for packets with length > MSS)
- Destination VM's ibmveth driver receives the packet with "checksum good"
bit set and so, SKB's ip_summed field is set with CHECKSUM_UNNECESSARY
- If "largesend" bit was on, mss value is copied from receive descriptor
into SKB's gso_size and other flags are appropriately set for
packets > MSS size
- The packet is now successfully delivered up the stack in destination VM
The offloads described above works fine for TCP communication among VMs in
the same pseries server ( VM A <=> PowerVM Hypervisor <=> VM B )
We are now enabling support for OVS in pseries PowerVM environment. One of
our requirements is to have ibmveth driver configured in "Trunk" mode, when
they are used with OVS. This is because, PowerVM Hypervisor will no more
bridge the packets between VMs, instead the packets are delivered to
IO Server which hosts OVS to bridge them between VMs or to external
networks (flow shown below),
VM A <=> PowerVM Hypervisor <=> IO Server(OVS) <=> PowerVM Hypervisor
<=> VM B
In "IO server" the packet is received by inbound Trunk ibmveth and then
delivered to OVS, which is then bridged to outbound Trunk ibmveth (shown
below),
Inbound Trunk ibmveth <=> OVS <=> Outbound Trunk ibmveth
In this model, we hit the following issues which impacted the VM
communication performance,
- Issue 1: ibmveth doesn't support largesend and checksum offload features
when configured as "Trunk". Driver has explicit checks to prevent
enabling these offloads.
- Issue 2: SYN packet drops seen at destination VM. When the packet
originates, it has CHECKSUM_PARTIAL flag set and as it gets delivered to
IO server's inbound Trunk ibmveth, on validating "checksum good" bits
in ibmveth receive routine, SKB's ip_summed field is set with
CHECKSUM_UNNECESSARY flag. This packet is then bridged by OVS (or Linux
Bridge) and delivered to outbound Trunk ibmveth. At this point the
outbound ibmveth transmit routine will not set "no checksum" and
"checksum good" bits in transmit buffer descriptor, as it does so only
when the ip_summed field is CHECKSUM_PARTIAL. When this packet gets
delivered to destination VM, TCP layer receives the packet with checksum
value of 0 and with no checksum related flags in ip_summed field. This
leads to packet drops. So, TCP connections never goes through fine.
- Issue 3: First packet of a TCP connection will be dropped, if there is
no OVS flow cached in datapath. OVS while trying to identify the flow,
computes the checksum. The computed checksum will be invalid at the
receiving end, as ibmveth transmit routine zeroes out the pseudo
checksum value in the packet. This leads to packet drop.
- Issue 4: ibmveth driver doesn't have support for SKB's with frag_list.
When Physical NIC has GRO enabled and when OVS bridges these packets,
OVS vport send code will end up calling dev_queue_xmit, which in turn
calls validate_xmit_skb.
In validate_xmit_skb routine, the larger packets will get segmented into
MSS sized segments, if SKB has a frag_list and if the driver to which
they are delivered to doesn't support NETIF_F_FRAGLIST feature.
This patch addresses the above four issues, thereby enabling end to end
largesend and checksum offload support for better performance.
- Fix for Issue 1 : Remove checks which prevent enabling TCP largesend and
checksum offloads.
- Fix for Issue 2 : When ibmveth receives a packet with "checksum good"
bit set and if its configured in Trunk mode, set appropriate SKB fields
using skb_partial_csum_set (ip_summed field is set with
CHECKSUM_PARTIAL)
- Fix for Issue 3: Recompute the pseudo header checksum before sending the
SKB up the stack.
- Fix for Issue 4: Linearize the SKBs with frag_list. Though we end up
allocating buffers and copying data, this fix gives
upto 4X throughput increase.
Note: All these fixes need to be dropped together as fixing just one of
them will lead to other issues immediately (especially for Issues 1,2 & 3).
Signed-off-by: Sivakumar Krishnasamy <ksiva@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some variants of adapters support the 1G speed capability. Need to
allow the configuration of 1G speed if adapter supports it.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The management firmware HSI contains masks which are already
shifted to their right place, so QED_MFW_SET_FIELD() is clearing
incorrect fields by shifting the mask by the offset.
Luckily, today we set the fields in an incrementing order [so we're
not erasing any previously set fields], but this still needs fixing.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is benign, but it makes more sense to start the close sequence
only after changing the internal state [in case it would once care].
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If too many CQs are requested, qed would print the available
number as if it's a resource and not a feature leading to the
wrong print.
Fixes: 08737a3fa3 ("qed: Inform qedi the number of possible CQs")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Re-organize the logic that allocates and frees memory of various
sub-components of the hw-function -
a. No need to pass pointers to said structure as parameters;
The internal logic knows exactly where to find/set the data.
b. Nullify pointers after cleanup to prevent possible errors to
re-entrant code.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver maintains its primary MAC in a private field which
gets updated when ndo_dev_set_mac() gets called.
However, there are flows where the primary MAC of the device can change
without said NDO being called [bond device in TLB mode configuring
slaves' addresses], resulting in a configuration where there's a mismatch
between what's apparent to user [the netdevice's value] and what's
configured in the HW [the private value].
As we don't have any real motivation of maintaining this
private field, simply remove it and start using the netdevice's
field instead.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When destroying the datapath channels, qede doesn't notify qed of the
released status blocks which were acquired during the initialization.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When management firmware declares that the device is WoL-capable,
the default driver behavior would be to allow the management firmware
to take the decision of whether it's actually needed or not.
Problem is ethtool interface doesn't have a 'default' kind
of option, and user would see the interface WoL as disabled,
which doesn't accurately reflect the actual configuration.
More-so, if the user actually wants to explicitly disable WoL he'd have
to first enable it [otherwise ethtool would block the command].
Instead of allowing management to make the decision, enable WoL by
default on all devices capable of it.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch addresses the review comment from the previous patch set,
by using phy_interface_mode_is_rgmii() helper function to address
all RGMII phy mode variants.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This bit was introduced with commit 5a21232983 ("net: Support for
csum_bad in skbuff") to reduce the stack workload when processing RX
packets carrying a wrong Internet Checksum. Up to now, only one driver and
GRO core are setting it.
Suggested-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
