f1d4fed13fa0c0f8c99cdbbc27460f1e1f46fd4e
7198 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
61307b7be4 |
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
||
|
Linus Torvalds
|
ff2632d7d0 |
Merge tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman: - Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT. - Allow per-process DEXCR (Dynamic Execution Control Register) settings via prctl, notably NPHIE which controls hashst/hashchk for ROP protection. - Install powerpc selftests in sub-directories. Note this changes the way run_kselftest.sh needs to be invoked for powerpc selftests. - Change fadump (Firmware Assisted Dump) to better handle memory add/remove. - Add support for passing additional parameters to the fadump kernel. - Add support for updating the kdump image on CPU/memory add/remove events. - Other small features, cleanups and fixes. Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang, Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui. * tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits) powerpc/fadump: Fix section mismatch warning powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP powerpc/fadump: update documentation about bootargs_append powerpc/fadump: pass additional parameters when fadump is active powerpc/fadump: setup additional parameters for dump capture kernel powerpc/pseries/fadump: add support for multiple boot memory regions selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction" KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info() KVM: PPC: Fix documentation for ppc mmu caps KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#" powerpc/code-patching: Use dedicated memory routines for patching powerpc/code-patching: Test patch_instructions() during boot powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region() powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX powerpc: Fix typos powerpc/eeh: Fix spelling of the word "auxillary" and update comment macintosh/ams: Fix unused variable warning powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large ... |
||
|
Linus Torvalds
|
f4b0c4b508 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Move a lot of state that was previously stored on a per vcpu basis
into a per-CPU area, because it is only pertinent to the host while
the vcpu is loaded. This results in better state tracking, and a
smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in nested
virtualisation. The last two instructions also require emulating
part of the pointer authentication extension. As a result, the trap
handling of pointer authentication has been greatly simplified.
- Turn the global (and not very scalable) LPI translation cache into
a per-ITS, scalable cache, making non directly injected LPIs much
cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing for
smaller EL2 mapping and some flexibility in implementing more or
less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR map has
been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
LoongArch:
- Add ParaVirt IPI support
- Add software breakpoint support
- Add mmio trace events support
RISC-V:
- Support guest breakpoints using ebreak
- Introduce per-VCPU mp_state_lock and reset_cntx_lock
- Virtualize SBI PMU snapshot and counter overflow interrupts
- New selftests for SBI PMU and Guest ebreak
- Some preparatory work for both TDX and SNP page fault handling.
This also cleans up the page fault path, so that the priorities of
various kinds of fauls (private page, no memory, write to read-only
slot, etc.) are easier to follow.
x86:
- Minimize amount of time that shadow PTEs remain in the special
REMOVED_SPTE state.
This is a state where the mmu_lock is held for reading but
concurrent accesses to the PTE have to spin; shortening its use
allows other vCPUs to repopulate the zapped region while the zapper
finishes tearing down the old, defunct page tables.
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID
field, which is defined by hardware but left for software use.
This lets KVM communicate its inability to map GPAs that set bits
51:48 on hosts without 5-level nested page tables. Guest firmware
is expected to use the information when mapping BARs; this avoids
that they end up at a legal, but unmappable, GPA.
- Fixed a bug where KVM would not reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- As usual, a bunch of code cleanups.
x86 (AMD):
- Implement a new and improved API to initialize SEV and SEV-ES VMs,
which will also be extendable to SEV-SNP.
The new API specifies the desired encryption in KVM_CREATE_VM and
then separately initializes the VM. The new API also allows
customizing the desired set of VMSA features; the features affect
the measurement of the VM's initial state, and therefore enabling
them cannot be done tout court by the hypervisor.
While at it, the new API includes two bugfixes that couldn't be
applied to the old one without a flag day in userspace or without
affecting the initial measurement. When a SEV-ES VM is created with
the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected
once the VMSA has been encrypted. Also, the FPU and AVX state will
be synchronized and encrypted too.
- Support for GHCB version 2 as applicable to SEV-ES guests.
This, once more, is only accessible when using the new
KVM_SEV_INIT2 flow for initialization of SEV-ES VMs.
x86 (Intel):
- An initial bunch of prerequisite patches for Intel TDX were merged.
They generally don't do anything interesting. The only somewhat
user visible change is a new debugging mode that checks that KVM's
MMU never triggers a #VE virtualization exception in the guest.
- Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig
VM-Exit to L1, as per the SDM.
Generic:
- Use vfree() instead of kvfree() for allocations that always use
vcalloc() or __vcalloc().
- Remove .change_pte() MMU notifier - the changes to non-KVM code are
small and Andrew Morton asked that I also take those through the
KVM tree.
The callback was only ever implemented by KVM (which was also the
original user of MMU notifiers) but it had been nonfunctional ever
since calls to set_pte_at_notify were wrapped with
invalidate_range_start and invalidate_range_end... in 2012.
Selftests:
- Enhance the demand paging test to allow for better reporting and
stressing of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing
elapsed time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support
MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test wrapper
shell script, to play nice with running in a minimal userspace
environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able
to complete a reasonable number of KVM_RUNs, as the assert can fail
on a completely valid setup.
If the test is run on a large-ish system that is otherwise idle,
and the test isn't affined to a low-ish number of CPUs, the vCPU
task can be repeatedly migrated to CPUs that are in deep sleep
states, which results in the vCPU having very little net runtime
before the next migration due to high wakeup latencies.
- Define _GNU_SOURCE for all selftests to fix a warning that was
introduced by a change to kselftest_harness.h late in the 6.9
cycle, and because forcing every test to #define _GNU_SOURCE is
painful.
- Provide a global pseudo-RNG instance for all tests, so that library
code can generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes
from guest code on x86, e.g. to help validate KVM's emulation of
locked accesses.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default
exception handlers at VM creation, instead of forcing tests to
manually trigger the related setup.
Documentation:
- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits)
selftests/kvm: remove dead file
KVM: selftests: arm64: Test vCPU-scoped feature ID registers
KVM: selftests: arm64: Test that feature ID regs survive a reset
KVM: selftests: arm64: Store expected register value in set_id_regs
KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
KVM: arm64: Only reset vCPU-scoped feature ID regs once
KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
KVM: arm64: Rename is_id_reg() to imply VM scope
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: SEV: Allow per-guest configuration of GHCB protocol version
KVM: SEV: Add GHCB handling for termination requests
KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
KVM: SEV: Add support to handle AP reset MSR protocol
KVM: x86: Explicitly zero kvm_caps during vendor module load
KVM: x86: Fully re-initialize supported_mce_cap on vendor module load
KVM: x86: Fully re-initialize supported_vm_types on vendor module load
KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values
...
|
||
|
Linus Torvalds
|
a49468240e |
Merge tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded
execmem_alloc() and execmem_free() so to make emphasis these helpers
are actually used outside of modules.
It starts with a non-functional changes API rename / placeholders to
then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges.
Archs now can intitialize this execmem_info as the last part of
mm_core_init() if they have to diverge from the norm. Each range is a
known type clearly articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future
enhancements an immediate clear gain is we get to enable KPROBES
without MODULES now. That is ultimately what motiviated to pick this
work up again, now with smaller goal as concrete stepping stone"
* tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of
kprobes: remove dependency on CONFIG_MODULES
powerpc: use CONFIG_EXECMEM instead of CONFIG_MODULES where appropriate
x86/ftrace: enable dynamic ftrace without CONFIG_MODULES
arch: make execmem setup available regardless of CONFIG_MODULES
powerpc: extend execmem_params for kprobes allocations
arm64: extend execmem_info for generated code allocations
riscv: extend execmem_params for generated code allocations
mm/execmem, arch: convert remaining overrides of module_alloc to execmem
mm/execmem, arch: convert simple overrides of module_alloc to execmem
mm: introduce execmem_alloc() and execmem_free()
module: make module_memory_{alloc,free} more self-contained
sparc: simplify module_alloc()
nios2: define virtual address space for modules
mips: module: rename MODULE_START to MODULES_VADDR
arm64: module: remove unneeded call to kasan_alloc_module_shadow()
kallsyms: replace deprecated strncpy with strscpy
module: allow UNUSED_KSYMS_WHITELIST to be relative against objtree.
|
||
|
Linus Torvalds
|
2d9db778dd |
Merge tag 'timers-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
"Core code:
- Make timekeeping and VDSO time readouts resilent against math
overflow:
In guest context the kernel is prone to math overflow when the host
defers the timer interrupt due to overload, malfunction or malice.
This can be mitigated by checking the clocksource delta for the
maximum deferrement which is readily available. If that value is
exceeded then the code uses a slowpath function which can handle
the multiplication overflow.
This functionality is enabled unconditionally in the kernel, but
made conditional in the VDSO code. The latter is conditional
because it allows architectures to optimize the check so it is not
causing performance regressions.
On X86 this is achieved by reworking the existing check for
negative TSC deltas as a negative delta obviously exceeds the
maximum deferrement when it is evaluated as an unsigned value. That
avoids two conditionals in the hotpath and allows to hide both the
negative delta and the large delta handling in the same slow path.
- Add an initial minimal ktime_t abstraction for Rust
- The usual boring cleanups and enhancements
Drivers:
- Boring updates to device trees and trivial enhancements in various
drivers"
* tag 'timers-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
clocksource/drivers/arm_arch_timer: Mark hisi_161010101_oem_info const
clocksource/drivers/timer-ti-dm: Remove an unused field in struct dmtimer
clocksource/drivers/renesas-ostm: Avoid reprobe after successful early probe
clocksource/drivers/renesas-ostm: Allow OSTM driver to reprobe for RZ/V2H(P) SoC
dt-bindings: timer: renesas: ostm: Document Renesas RZ/V2H(P) SoC
rust: time: doc: Add missing C header links
clocksource: Make the int help prompt unit readable in ncurses
hrtimer: Rename __hrtimer_hres_active() to hrtimer_hres_active()
timerqueue: Remove never used function timerqueue_node_expires()
rust: time: Add Ktime
vdso: Fix powerpc build U64_MAX undeclared error
clockevents: Convert s[n]printf() to sysfs_emit()
clocksource: Convert s[n]printf() to sysfs_emit()
clocksource: Make watchdog and suspend-timing multiplication overflow safe
timekeeping: Let timekeeping_cycles_to_ns() handle both under and overflow
timekeeping: Make delta calculation overflow safe
timekeeping: Prepare timekeeping_cycles_to_ns() for overflow safety
timekeeping: Fold in timekeeping_delta_to_ns()
timekeeping: Consolidate timekeeping helpers
timekeeping: Refactor timekeeping helpers
...
|
||
Mike Rapoport (IBM)
|
0a956d52e6 |
powerpc: use CONFIG_EXECMEM instead of CONFIG_MODULES where appropriate
There are places where CONFIG_MODULES guards the code that depends on memory allocation being done with module_alloc(). Replace CONFIG_MODULES with CONFIG_EXECMEM in such places. Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Linus Torvalds
|
6e5a0c30b6 |
Merge tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
* tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/pelt: Remove shift of thermal clock
sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()
thermal/cpufreq: Remove arch_update_thermal_pressure()
sched/cpufreq: Take cpufreq feedback into account
cpufreq: Add a cpufreq pressure feedback for the scheduler
sched/fair: Fix update of rd->sg_overutilized
sched/vtime: Do not include <asm/vtime.h> header
s390/irq,nmi: Include <asm/vtime.h> header directly
s390/vtime: Remove unused __ARCH_HAS_VTIME_TASK_SWITCH leftover
sched/vtime: Get rid of generic vtime_task_switch() implementation
sched/vtime: Remove confusing arch_vtime_task_switch() declaration
sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags
sched/fair: Rename set_rd_overutilized_status() to set_rd_overutilized()
sched/fair: Rename SG_OVERLOAD to SG_OVERLOADED
sched/fair: Rename {set|get}_rd_overload() to {set|get}_rd_overloaded()
sched/fair: Rename root_domain::overload to ::overloaded
sched/fair: Use helper functions to access root_domain::overload
sched/fair: Check root_domain::overload value before update
sched/fair: Combine EAS check with root_domain::overutilized access
sched/fair: Simplify the continue_balancing logic in sched_balance_newidle()
...
|
||
|
Linus Torvalds
|
92f74f7f40 |
Merge tag 'execve-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook: - Provide knob to change (previously fixed) coredump NOTES size (Allen Pais) - Add sched_prepare_exec tracepoint (Marco Elver) - Make /proc/$pid/auxv work under binfmt_elf_fdpic (Max Filippov) - Convert ARCH_HAVE_EXTRA_ELF_NOTES to proper Kconfig (Vignesh Balasubramanian) - Leave a gap between .bss and brk * tag 'execve-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: fs/coredump: Enable dynamic configuration of max file note size binfmt_elf_fdpic: fix /proc/<pid>/auxv binfmt_elf: Leave a gap between .bss and brk Replace macro "ARCH_HAVE_EXTRA_ELF_NOTES" with kconfig tracing: Add sched_prepare_exec tracepoint |
||
Michael Ellerman
|
e789d4499a |
Merge branch 'topic/kdump-hotplug' into next
Merge our topic branch containing kdump hotplug changes, more detail from the
original cover letter:
Commit
|
||
Paolo Bonzini
|
4232da23d7 |
Merge tag 'loongarch-kvm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.10 1. Add ParaVirt IPI support. 2. Add software breakpoint support. 3. Add mmio trace events support. |
||
Hari Bathini
|
3416c9daa6 |
powerpc/fadump: pass additional parameters when fadump is active
Append the additional parameters passed/set in the dedicated parameter area (RTAS_FADUMP_PARAM_AREA) to bootargs in fadump capture kernel. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240509115755.519982-4-hbathini@linux.ibm.com |
||
|
Hari Bathini
|
683eab94da |
powerpc/fadump: setup additional parameters for dump capture kernel
For fadump case, passing additional parameters to dump capture kernel helps in minimizing the memory footprint for it and also provides the flexibility to disable components/modules, like hugepages, that are hindering the boot process of the special dump capture environment. Set up a dedicated parameter area to be passed to the capture kernel. This area type is defined as RTAS_FADUMP_PARAM_AREA. Sysfs attribute '/sys/kernel/fadump/bootargs_append' is exported to the userspace to specify the additional parameters to be passed to the capture kernel Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240509115755.519982-3-hbathini@linux.ibm.com |
||
|
Hari Bathini
|
78d5cc15fb |
powerpc/pseries/fadump: add support for multiple boot memory regions
Currently, fadump on pseries assumes a single boot memory region even though f/w supports more than one boot memory region. Add support for more boot memory regions to make the implementation flexible for any enhancements that introduce other region types. For this, rtas memory structure for fadump is updated to have multiple boot memory regions instead of just one. Additionally, methods responsible for creating the fadump memory structure during both the first and second kernel boot have been modified to take these multiple boot memory regions into account. Also, a new callback has been added to the fadump_ops structure to get the maximum boot memory regions supported by the platform. Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240509115755.519982-2-hbathini@linux.ibm.com |
||
|
Paolo Bonzini
|
aa24865fb5 |
Merge tag 'kvm-riscv-6.10-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.10 - Support guest breakpoints using ebreak - Introduce per-VCPU mp_state_lock and reset_cntx_lock - Virtualize SBI PMU snapshot and counter overflow interrupts - New selftests for SBI PMU and Guest ebreak |
||
Matthias Schiffer
|
ad679719d7 |
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
This register number is hardware-specific, rename it for clarity. FIXME comments are added in a few places where it seems like the wrong register is used. As I can't test this, only the rename is done with no functional change. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240124105031.45734-1-matthias.schiffer@ew.tq-group.com |
||
Bjorn Helgaas
|
0ddbbb8960 |
powerpc: Fix typos
Fix typos, most reported by "codespell arch/powerpc". Only touches comments, no code changes. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240103231605.1801364-8-helgaas@kernel.org |
||
Ghanshyam Agrawal
|
39434af10f |
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
Fix spelling of the word "auxillary" in arch/powerpc/kernel/eeh_pe.c and arch/powerpc/include/asm/eeh.h. Also update the eeh_set_pe_aux_size() comment to include the units. Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com> [mpe: Squash into one commit] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/2ab034609285b21c309cd8ab26c937c846d37ee7.1703756365.git.ghanshyam1898@gmail.com |
||
Christophe Leroy
|
8ecf3c1dab |
powerpc/bpf/32: Fix failing test_bpf tests
Recent additions in BPF like cpu v4 instructions, test_bpf module
exhibits the following failures:
test_bpf: #82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
test_bpf: #83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
test_bpf: #84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
test_bpf: #85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
test_bpf: #86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
test_bpf: #165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times)
test_bpf: #166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times)
test_bpf: #169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times)
test_bpf: #170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times)
test_bpf: #172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times)
test_bpf: #313 BSWAP 16: 0x0123456789abcdef -> 0xefcd
eBPF filter opcode 00d7 (@2) unsupported
jited:0 301 PASS
test_bpf: #314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89
eBPF filter opcode 00d7 (@2) unsupported
jited:0 555 PASS
test_bpf: #315 BSWAP 64: 0x0123456789abcdef -> 0x67452301
eBPF filter opcode 00d7 (@2) unsupported
jited:0 268 PASS
test_bpf: #316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89
eBPF filter opcode 00d7 (@2) unsupported
jited:0 269 PASS
test_bpf: #317 BSWAP 16: 0xfedcba9876543210 -> 0x1032
eBPF filter opcode 00d7 (@2) unsupported
jited:0 460 PASS
test_bpf: #318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476
eBPF filter opcode 00d7 (@2) unsupported
jited:0 320 PASS
test_bpf: #319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe
eBPF filter opcode 00d7 (@2) unsupported
jited:0 222 PASS
test_bpf: #320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476
eBPF filter opcode 00d7 (@2) unsupported
jited:0 273 PASS
test_bpf: #344 BPF_LDX_MEMSX | BPF_B
eBPF filter opcode 0091 (@5) unsupported
jited:0 432 PASS
test_bpf: #345 BPF_LDX_MEMSX | BPF_H
eBPF filter opcode 0089 (@5) unsupported
jited:0 381 PASS
test_bpf: #346 BPF_LDX_MEMSX | BPF_W
eBPF filter opcode 0081 (@5) unsupported
jited:0 505 PASS
test_bpf: #490 JMP32_JA: Unconditional jump: if (true) return 1
eBPF filter opcode 0006 (@1) unsupported
jited:0 261 PASS
test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed]
Fix them by adding missing processing.
Fixes:
|
||
|
Michael Ellerman
|
be140f1732 |
powerpc/64: Set _IO_BASE to POISON_POINTER_DELTA not 0 for CONFIG_PCI=n
There is code that builds with calls to IO accessors even when CONFIG_PCI=n, but the actual calls are guarded by runtime checks. If not those calls would be faulting, because the page at virtual address zero is (usually) not mapped into the kernel. As Arnd pointed out, it is possible a large port value could cause the address to be above mmap_min_addr which would then access userspace, which would be a bug. To avoid any such issues, set _IO_BASE to POISON_POINTER_DELTA. That is a value chosen to point into unmapped space between the kernel and userspace, so any access will always fault. Note that on 32-bit POISON_POINTER_DELTA is 0, so the patch only has an effect on 64-bit. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240503075619.394467-2-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
03c0f2c2b2 |
powerpc/io: Avoid clang null pointer arithmetic warnings
With -Wextra clang warns about pointer arithmetic using a null pointer.
When building with CONFIG_PCI=n, that triggers a warning in the IO
accessors, eg:
In file included from linux/arch/powerpc/include/asm/io.h:672:
linux/arch/powerpc/include/asm/io-defs.h:23:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
23 | DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
linux/arch/powerpc/include/asm/io.h:591:53: note: expanded from macro '__do_inb'
591 | #define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port);
| ~~~~~~~~~~~~~~~~~~~~~ ^
That is because when CONFIG_PCI=n, _IO_BASE is defined as 0.
Although _IO_BASE is defined as plain 0, the cast (PCI_IO_ADDR) converts
it to void * before the addition with port happens.
Instead the addition can be done first, and then the cast. The resulting
value will be the same, but avoids the warning, and also avoids void
pointer arithmetic which is apparently non-standard.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYtEh8zmq8k8wE-8RZwW-Qr927RLTn+KqGnq1F=ptaaNsA@mail.gmail.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240503075619.394467-1-mpe@ellerman.id.au
|
||
Benjamin Gray
|
628d701f2d |
powerpc/dexcr: Add DEXCR prctl interface
Now that we track a DEXCR on a per-task basis, individual tasks are free to configure it as they like. The interface is a pair of getter/setter prctl's that work on a single aspect at a time (multiple aspects at once is more difficult if there are different rules applied for each aspect, now or in future). The getter shows the current state of the process config, and the setter allows setting/clearing the aspect. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> [mpe: Account for PR_RISCV_SET_ICACHE_FLUSH_CTX, shrink some longs lines] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240417112325.728010-5-bgray@linux.ibm.com |
||
|
Linus Torvalds
|
ef09525775 |
Merge tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman: - Fix incorrect delay handling in the plpks (keystore) code - Fix a panic when an LPAR boots with a frozen PE Thanks to Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, and Nayna Jain. * tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE powerpc/pseries: make max polling consistent for longer H_CALLs |
||
|
Benjamin Gray
|
bbd99922d0 |
powerpc/dexcr: Reset DEXCR value across exec
Inheriting the DEXCR across exec can have security and usability concerns. If a program is compiled with hash instructions it generally expects to run with NPHIE enabled. But if the parent process disables NPHIE then if it's not careful it will be disabled for any children too and the protection offered by hash checks is basically worthless. This patch introduces a per-process reset value that new execs in a particular process tree are initialized with. This enables fine grained control over what DEXCR value child processes run with by default. For example, containers running legacy binaries that expect hash instructions to act as NOPs could configure the reset value of the container root to control the default reset value for all members of the container. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> [mpe: Add missing SPDX tag on dexcr.c] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240417112325.728010-4-bgray@linux.ibm.com |
||
|
Benjamin Gray
|
75171f06c4 |
powerpc/dexcr: Track the DEXCR per-process
Add capability to make the DEXCR act as a per-process SPR. We do not yet have an interface for changing the values per task. We also expect the kernel to use a single DEXCR value across all tasks while in privileged state, so there is no need to synchronize after changing it (the userspace aspects will synchronize upon returning to userspace). Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240417112325.728010-3-bgray@linux.ibm.com |
||
Dr. David Alan Gilbert
|
4071739249 |
powerpc/module: Remove arch specific module bug stuff
The last function to reference module_bug_list went in 2008's commit |
||
Nathan Lynch
|
ff2e185cf7 |
powerpc/pseries: Enforce hcall result buffer validity and size
plpar_hcall(), plpar_hcall9(), and related functions expect callers to
provide valid result buffers of certain minimum size. Currently this
is communicated only through comments in the code and the compiler has
no idea.
For example, if I write a bug like this:
long retbuf[PLPAR_HCALL_BUFSIZE]; // should be PLPAR_HCALL9_BUFSIZE
plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf, ...);
This compiles with no diagnostics emitted, but likely results in stack
corruption at runtime when plpar_hcall9() stores results past the end
of the array. (To be clear this is a contrived example and I have not
found a real instance yet.)
To make this class of error less likely, we can use explicitly-sized
array parameters instead of pointers in the declarations for the hcall
APIs. When compiled with -Warray-bounds[1], the code above now
provokes a diagnostic like this:
error: array argument is too small;
is of size 32, callee requires at least 72 [-Werror,-Warray-bounds]
60 | plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf,
| ^ ~~~~~~
[1] Enabled for LLVM builds but not GCC for now. See commit
|
||
Sourabh Jain
|
c6c5b14dac |
powerpc: make fadump resilient with memory add/remove events
Due to changes in memory resources caused by either memory hotplug or online/offline events, the elfcorehdr, which describes the CPUs and memory of the crashed kernel to the kernel that collects the dump (known as second/fadump kernel), becomes outdated. Consequently, attempting dump collection with an outdated elfcorehdr can lead to failed or inaccurate dump collection. Memory hotplug or online/offline events is referred as memory add/remove events in reset of the commit message. The current solution to address the aforementioned issue is as follows: Monitor memory add/remove events in userspace using udev rules, and re-register fadump whenever there are changes in memory resources. This leads to the creation of a new elfcorehdr with updated system memory information. There are several notable issues associated with re-registering fadump for every memory add/remove events. 1. Bulk memory add/remove events with udev-based fadump re-registration can lead to race conditions and, more importantly, it creates a wide window during which fadump is inactive until all memory add/remove events are settled. 2. Re-registering fadump for every memory add/remove event is inefficient. 3. The memory for elfcorehdr is allocated based on the memblock regions available during early boot and remains fixed thereafter. However, if elfcorehdr is later recreated with additional memblock regions, its size will increase, potentially leading to memory corruption. Address the aforementioned challenges by shifting the creation of elfcorehdr from the first kernel (also referred as the crashed kernel), where it was created and frequently recreated for every memory add/remove event, to the fadump kernel. As a result, the elfcorehdr only needs to be created once, thus eliminating the necessity to re-register fadump during memory add/remove events. At present, the first kernel prepares fadump header and stores it in the fadump reserved area. The fadump header includes the start address of the elfcorehdr, crashing CPU details, and other relevant information. In the event of a crash in the first kernel, the second/fadump boots and accesses the fadump header prepared by the first kernel. It then performs the following steps in a platform-specific function [rtas|opal]_fadump_process: 1. Sanity check for fadump header 2. Update CPU notes in elfcorehdr Along with the above, update the setup_fadump()/fadump.c to create elfcorehdr and set its address to the global variable elfcorehdr_addr for the vmcore module to process it in the second/fadump kernel. Section below outlines the information required to create the elfcorehdr and the changes made to make it available to the fadump kernel if it's not already. To create elfcorehdr, the following crashed kernel information is required: CPU notes, vmcoreinfo, and memory ranges. At present, the CPU notes are already prepared in the fadump kernel, so no changes are needed in that regard. The fadump kernel has access to all crashed kernel memory regions, including boot memory regions that are relocated by firmware to fadump reserved areas, so no changes for that either. However, it is necessary to add new members to the fadump header, i.e., the 'fadump_crash_info_header' structure, in order to pass the crashed kernel's vmcoreinfo address and its size to fadump kernel. In addition to the vmcoreinfo address and size, there are a few other attributes also added to the fadump_crash_info_header structure. 1. version: It stores the fadump header version, which is currently set to 1. This provides flexibility to update the fadump crash info header in the future without changing the magic number. For each change in the fadump header, the version will be increased. This will help the updated kernel determine how to handle kernel dumps from older kernels. The magic number remains relevant for checking fadump header corruption. 2. pt_regs_sz/cpu_mask_sz: Store size of pt_regs and cpu_mask structure of first kernel. These attributes are used to prevent dump processing if the sizes of pt_regs or cpu_mask structure differ between the first and fadump kernels. Note: if either first/crashed kernel or second/fadump kernel do not have the changes introduced here then kernel fail to collect the dump and prints relevant error message on the console. Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240422195932.1583833-2-sourabhjain@linux.ibm.com |
||
Shrikanth Hegde
|
6d43416385 |
powerpc/pseries: Add failure related checks for h_get_mpp and h_get_ppp
Couple of Minor fixes: - hcall return values are long. Fix that for h_get_mpp, h_get_ppp and parse_ppp_data - If hcall fails, values set should be at-least zero. It shouldn't be uninitialized values. Fix that for h_get_mpp and h_get_ppp Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240412092047.455483-3-sshegde@linux.ibm.com |
||
Baoquan He
|
0b52663f75 |
mm/mm_init.c: remove arch_reserved_kernel_pages()
Since the current calculation of calc_nr_kernel_pages() has taken into consideration of kernel reserved memory, no need to have arch_reserved_kernel_pages() any more. Link: https://lkml.kernel.org/r/20240325145646.1044760-7-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Peter Xu
|
9636f055da |
mm/treewide: remove pXd_huge()
This API is not used anymore, drop it for the whole tree. Link: https://lkml.kernel.org/r/20240318200404.448346-13-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fabio Estevam <festevam@denx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Mark Salter <msalter@redhat.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Peter Xu
|
460b9adc05 |
mm/powerpc: redefine pXd_huge() with pXd_leaf()
PowerPC book3s 4K mostly has the same definition on both, except pXd_huge() constantly returns 0 for hash MMUs. As Michael Ellerman pointed out [1], it is safe to check _PAGE_PTE on hash MMUs, as the bit will never be set so it will keep returning false. As a reference, __p[mu]d_mkhuge() will trigger a BUG_ON trying to create such huge mappings for 4K hash MMUs. Meanwhile, the major powerpc hugetlb pgtable walker __find_linux_pte() already used pXd_leaf() to check leaf hugetlb mappings. The goal should be that we will have one API pXd_leaf() to detect all kinds of huge mappings (hugepd is still special in this case, though). AFAICT we need to use the pXd_leaf() impl (rather than pXd_huge()'s) to make sure ie. THPs on hash MMU will also return true. This helps to simplify a follow up patch to drop pXd_huge() treewide. NOTE: *_leaf() definition need to be moved before the inclusion of asm/book3s/64/pgtable-4k.h, which defines pXd_huge() with it. [1] https://lore.kernel.org/r/87v85zo6w7.fsf@mail.lhotse Link: https://lkml.kernel.org/r/20240318200404.448346-10-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fabio Estevam <festevam@denx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Mark Salter <msalter@redhat.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Sourabh Jain
|
849599b702 |
powerpc/crash: add crash memory hotplug support
Extend the arch crash hotplug handler, as introduced by the patch title
("powerpc: add crash CPU hotplug support"), to also support memory
add/remove events.
Elfcorehdr describes the memory of the crash kernel to capture the
kernel; hence, it needs to be updated if memory resources change due to
memory add/remove events. Therefore, arch_crash_handle_hotplug_event()
is updated to recreate the elfcorehdr and replace it with the previous
one on memory add/remove events.
The memblock list is used to prepare the elfcorehdr. In the case of
memory hot remove, the memblock list is updated after the arch crash
hotplug handler is triggered, as depicted in Figure 1. Thus, the
hot-removed memory is explicitly removed from the crash memory ranges
to ensure that the memory ranges added to elfcorehdr do not include the
hot-removed memory.
Memory remove
|
v
Offline pages
|
v
Initiate memory notify call <----> crash hotplug handler
chain for MEM_OFFLINE event
|
v
Update memblock list
Figure 1
There are two system calls, `kexec_file_load` and `kexec_load`, used to
load the kdump image. A few changes have been made to ensure that the
kernel can safely update the elfcorehdr component of the kdump image for
both system calls.
For the kexec_file_load syscall, kdump image is prepared in the kernel.
To support an increasing number of memory regions, the elfcorehdr is
built with extra buffer space to ensure that it can accommodate
additional memory ranges in future.
For the kexec_load syscall, the elfcorehdr is updated only if the
KEXEC_CRASH_HOTPLUG_SUPPORT kexec flag is passed to the kernel by the
kexec tool. Passing this flag to the kernel indicates that the
elfcorehdr is built to accommodate additional memory ranges and the
elfcorehdr segment is not considered for SHA calculation, making it safe
to update.
The changes related to this feature are kept under the CRASH_HOTPLUG
config, and it is enabled by default.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240326055413.186534-7-sourabhjain@linux.ibm.com
|
||
|
Sourabh Jain
|
b741092d59 |
powerpc/crash: add crash CPU hotplug support
Due to CPU/Memory hotplug or online/offline events, the elfcorehdr (which describes the CPUs and memory of the crashed kernel) and FDT (Flattened Device Tree) of kdump image becomes outdated. Consequently, attempting dump collection with an outdated elfcorehdr or FDT can lead to failed or inaccurate dump collection. Going forward, CPU hotplug or online/offline events are referred as CPU/Memory add/remove events. The current solution to address the above issue involves monitoring the CPU/Memory add/remove events in userspace using udev rules and whenever there are changes in CPU and memory resources, the entire kdump image is loaded again. The kdump image includes kernel, initrd, elfcorehdr, FDT, purgatory. Given that only elfcorehdr and FDT get outdated due to CPU/Memory add/remove events, reloading the entire kdump image is inefficient. More importantly, kdump remains inactive for a substantial amount of time until the kdump reload completes. To address the aforementioned issue, commit |
||
|
Sourabh Jain
|
0857beff9c |
powerpc/kexec: make the update_cpus_node() function public
Move the update_cpus_node() from kexec/{file_load_64.c => core_64.c}
to allow other kexec components to use it.
Later in the series, this function is used for in-kernel updates
to the kdump image during CPU/memory hotplug or online/offline events for
both kexec_load and kexec_file_load syscalls.
No functional changes are intended.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240326055413.186534-5-sourabhjain@linux.ibm.com
|
||
|
Sourabh Jain
|
f5f0da5a7b |
powerpc/kexec: move *_memory_ranges functions to ranges.c
Move the following functions form kexec/{file_load_64.c => ranges.c} and
make them public so that components other than KEXEC_FILE can also use
these functions.
1. get_exclude_memory_ranges
2. get_reserved_memory_ranges
3. get_crash_memory_ranges
4. get_usable_memory_ranges
Later in the series get_crash_memory_ranges function is utilized for
in-kernel updates to kdump image during CPU/Memory hotplug or
online/offline events for both kexec_load and kexec_file_load syscalls.
Since the above functions are moved to ranges.c, some of the helper
functions in ranges.c are no longer required to be public. Mark them as
static and removed them from kexec_ranges.h header file.
Finally, remove the CONFIG_KEXEC_FILE build dependency for range.c
because it is required for other config, such as CONFIG_CRASH_DUMP.
No functional changes are intended.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240326055413.186534-4-sourabhjain@linux.ibm.com
|
||
Nayna Jain
|
784354349d |
powerpc/pseries: make max polling consistent for longer H_CALLs
Currently, plpks_confirm_object_flushed() function polls for 5msec in
total instead of 5sec.
Keep max polling time consistent for all the H_CALLs, which take longer
than expected, to be 5sec. Also, make use of fsleep() everywhere to
insert delay.
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Fixes:
|
||
Alexander Gordeev
|
08a36a4854 |
sched/vtime: Do not include <asm/vtime.h> header
There is no architecture-specific code or data left that generic <linux/vtime.h> needs to know about. Thus, avoid the inclusion of <asm/vtime.h> header. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Nicholas Piggin <npiggin@gmail.com> Link: https://lore.kernel.org/r/f7cd245668b9ae61a55184871aec494ec9199c4a.1712760275.git.agordeev@linux.ibm.com |
||
|
Alexander Gordeev
|
89d6910cc5 |
sched/vtime: Get rid of generic vtime_task_switch() implementation
The generic vtime_task_switch() implementation gets built only if __ARCH_HAS_VTIME_TASK_SWITCH is not defined, but requires an architecture to implement arch_vtime_task_switch() callback at the same time, which is confusing. Further, arch_vtime_task_switch() is implemented for 32-bit PowerPC architecture only and vtime_task_switch() generic variant is rather superfluous. Simplify the whole vtime_task_switch() wiring by moving the existing generic implementation to PowerPC. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/2cb6e3caada93623f6d4f78ad938ac6cd0e2fda8.1712760275.git.agordeev@linux.ibm.com |
||
Vignesh Balasubramanian
|
a9c3475dd6 |
Replace macro "ARCH_HAVE_EXTRA_ELF_NOTES" with kconfig
"ARCH_HAVE_EXTRA_ELF_NOTES" enables an extra note section in the core dump. Kconfig variable is preferred over ARCH_HAVE_* macro. Co-developed-by: Jini Susan George <jinisusan.george@amd.com> Signed-off-by: Jini Susan George <jinisusan.george@amd.com> Signed-off-by: Vignesh Balasubramanian <vigbalas@amd.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20240412062138.1132841-2-vigbalas@amd.com Signed-off-by: Kees Cook <keescook@chromium.org> |
||
Mahesh Salgaonkar
|
0db880fc86 |
powerpc: Avoid nmi_enter/nmi_exit in real mode interrupt.
nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel crash when invoked during real mode interrupt handling (e.g. early HMI/MCE interrupt handler) if percpu allocation comes from vmalloc area. Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI() wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when percpu allocation is from the embedded first chunk. However with CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu allocation can come from the vmalloc area. With kernel command line "percpu_alloc=page" we can force percpu allocation to come from vmalloc area and can see kernel crash in machine_check_early: [ 1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110 [ 1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0 [ 1.215719] --- interrupt: 200 [ 1.215720] [c000000fffd73180] [0000000000000000] 0x0 (unreliable) [ 1.215722] [c000000fffd731b0] [0000000000000000] 0x0 [ 1.215724] [c000000fffd73210] [c000000000008364] machine_check_early_common+0x134/0x1f8 Fix this by avoiding use of nmi_enter()/nmi_exit() in real mode if percpu first chunk is not embedded. Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Shirisha Ganta <shirisha@linux.ibm.com> Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240410043006.81577-1-mahesh@linux.ibm.com |
||
Nicholas Miehlbradt
|
676b2f99b0 |
powerpc: Add static_key_feature_checks_initialized flag
JUMP_LABEL_FEATURE_CHECK_DEBUG used static_key_intialized to determine
whether {cpu,mmu}_has_feature() is used before static keys were
initialized. However, {cpu,mmu}_has_feature() should not be used before
setup_feature_keys() is called but static_key_initialized is set well
before this by the call to jump_label_init() in early_init_devtree().
This creates a window in which JUMP_LABEL_FEATURE_CHECK_DEBUG will not
detect misuse and report errors. Add a flag specifically to indicate
when {cpu,mmu}_has_feature() is safe to use.
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240408052358.5030-1-nicholas@linux.ibm.com
|
||
|
Paolo Bonzini
|
f3b65bbaed |
KVM: delete .change_pte MMU notifier callback
The .change_pte() MMU notifier callback was intended as an
optimization. The original point of it was that KSM could tell KVM to flip
its secondary PTE to a new location without having to first zap it. At
the time there was also an .invalidate_page() callback; both of them were
*not* bracketed by calls to mmu_notifier_invalidate_range_{start,end}(),
and .invalidate_page() also doubled as a fallback implementation of
.change_pte().
Later on, however, both callbacks were changed to occur within an
invalidate_range_start/end() block.
In the case of .change_pte(), commit
|
||
Adrian Hunter
|
c8e3a8b6f2 |
vdso: Consolidate vdso_calc_delta()
Consolidate vdso_calc_delta(), in preparation for further simplification. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240325064023.2997-2-adrian.hunter@intel.com |
||
Arnd Bergmann
|
cffaefd15a |
vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
Both the vdso rework and the CONFIG_PAGE_SHIFT changes were merged during
the v6.9 merge window, so it is now possible to use CONFIG_PAGE_SHIFT
instead of including asm/page.h in the vdso.
This avoids the workaround for arm64 - commit
|
||
|
Hari Bathini
|
5c4233cc09 |
powerpc/kdump: Split KEXEC_CORE and CRASH_DUMP dependency
Remove CONFIG_CRASH_DUMP dependency on CONFIG_KEXEC. CONFIG_KEXEC_CORE was used at places where CONFIG_CRASH_DUMP or CONFIG_CRASH_RESERVE was appropriate. Replace with appropriate #ifdefs to support CONFIG_KEXEC and !CONFIG_CRASH_DUMP configuration option. Also, make CONFIG_FA_DUMP dependent on CONFIG_CRASH_DUMP to avoid unmet dependencies for FA_DUMP with !CONFIG_KEXEC_CORE configuration option. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240226103010.589537-4-hbathini@linux.ibm.com |
||
|
Linus Torvalds
|
66a27abac3 |
Merge tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman: - Add AT_HWCAP3 and AT_HWCAP4 aux vector entries for future use by glibc - Add support for recognising the Power11 architected and raw PVRs - Add support for nr_cpus=n on the command line where the boot CPU is >= n - Add ppcxx_allmodconfig targets for all 32-bit sub-arches - Other small features, cleanups and fixes Thanks to Akanksha J N, Brian King, Christophe Leroy, Dawei Li, Geoff Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Kajol Jain, Kunwu Chan, Li zeming, Madhavan Srinivasan, Masahiro Yamada, Nathan Chancellor, Nicholas Piggin, Peter Bergner, Qiheng Lin, Randy Dunlap, Ricardo B. Marliere, Rob Herring, Sathvika Vasireddy, Shrikanth Hegde, Uwe Kleine-König, Vaibhav Jain, and Wen Xiong. * tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (71 commits) powerpc/macio: Make remove callback of macio driver void returned powerpc/83xx: Fix build failure with FPU=n powerpc/64s: Fix get_hugepd_cache_index() build failure powerpc/4xx: Fix warp_gpio_leds build failure powerpc/amigaone: Make several functions static powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc. macintosh/adb: make adb_dev_class constant powerpc: xor_vmx: Add '-mhard-float' to CFLAGS powerpc/fsl: Fix mfpmr() asm constraint error powerpc: Remove cpu-as-y completely powerpc/fsl: Modernise mt/mfpmr powerpc/fsl: Fix mfpmr build errors with newer binutils powerpc/64s: Use .machine power4 around dcbt powerpc/64s: Move dcbt/dcbtst sequence into a macro powerpc/mm: Code cleanup for __hash_page_thp powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks powerpc/irq: Allow softirq to hardirq stack transition powerpc: Stop using of_root powerpc/machdep: Define 'compatibles' property in ppc_md and use it of: Reimplement of_machine_is_compatible() using of_machine_compatible_match() ... |
||
|
Linus Torvalds
|
902861e34c |
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
||
|
Linus Torvalds
|
480e035fc4 |
Merge tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights are usual, more AMD IP blocks for future hw, i915/xe
changes, Displayport tunnelling support for i915, msm YUV over DP
changes, new tests for ttm, but its mostly a lot of stuff all over the
place from lots of people.
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync
in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by
hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support"
* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
drm/amd/pm: wait for completion of the EnableGfxImu message
drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
drm/amdgpu: add smu 14.0.1 support
drm/amdgpu: add VPE 6.1.1 discovery support
drm/amdgpu/vpe: add VPE 6.1.1 support
drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
drm/amdgpu/vpe: add collaborate mode support for VPE
drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
drm/amdgpu/vpe: add multi instance VPE support
drm/amdgpu/discovery: add nbif v6_3_1 ip block
drm/amdgpu: Add nbif v6_3_1 ip block support
drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
arch/powerpc: Remove <linux/fb.h> from backlight code
macintosh/via-pmu-backlight: Include <linux/backlight.h>
fbdev/chipsfb: Include <linux/backlight.h>
drm/etnaviv: Restore some id values
drm/amdkfd: make kfd_class constant
drm/amdgpu: add ring timeout information in devcoredump
...
|
||
|
Linus Torvalds
|
ce0c1c9265 |
Merge tag 'modules-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Christophe Leroy did most of the work on this release, first with a
few cleanups on CONFIG_STRICT_KERNEL_RWX and ending with error
handling for when set_memory_XX() can fail.
This is part of a larger effort to clean up all these callers which
can fail, modules is just part of it"
* tag 'modules-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Don't ignore errors from set_memory_XX()
lib/test_kmod: fix kernel-doc warnings
powerpc: Simplify strict_kernel_rwx_enabled()
modules: Remove #ifdef CONFIG_STRICT_MODULE_RWX around rodata_enabled
init: Declare rodata_enabled and mark_rodata_ro() at all time
module: Change module_enable_{nx/x/ro}() to more explicit names
module: Use set_memory_rox()
|
||
|
Linus Torvalds
|
216532e147 |
Merge tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|