f8824e151fbfa0ac0a258015d606ea6f4a10251b
12693 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
f8824e151f |
Merge tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes as usual, but the only significant stuff in ALSA core
part is the MIDI 2.0 support, while ASoC core kept receiving the code
refactoring. The majority of changes are seen rather in device
drivers, and quite a few new drivers can be found there.
Here we go, some highlights:
ALSA and ASoC Core:
- Support of MIDI 2.0 devices: rawmidi and sequencer API have been
extended for the support of the new UMP (Universal MIDI Packet)
protocol, USB audio driver got the USB MIDI 2.0 interface support
- Continued refactoring around ASoC DAI links and the ordering of
trigger callbacks
- PCM ABI extension for better drain support
ASoC Drivers:
- Conversions of many drivers to use maple tree based caches
- Everlasting improvement works on ASoC Intel drivers
- Compressed audio support for Qualcomm
- Support for AMD SoundWire, Analog Devices SSM3515, Google
Chameleon, Ingenic X1000, Intel systems with various CODECs,
Loongson platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton
NAU8825C, NXP platforms with NAU8822, Qualcomm WSA884x, StarFive
JH7110, Texas Instruments TAS2781
HD-audio:
- Quirks for HP and ASUS machines
- CS35L41 HD-audio codec fixes
- Loongson HD-audio support
Misc:
- A new virtual PCM test driver for kselftests
- Continued refactoring and improvements on the legacy emu10k1
driver"
* tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (556 commits)
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook
ASoC: hdmi-codec: fix channel info for compressed formats
ALSA: pcm: fix ELD constraints for (E)AC3, DTS(-HD) and MLP formats
ASoC: core: Always store of_node when getting DAI link component
ASoC: tas2781: Fix error code in tas2781_load_calibration()
ASoC: amd: update pm_runtime enable sequence
ALSA: ump: Export MIDI1 / UMP conversion helpers
ASoC: tas2781: fix Kconfig dependencies
ASoC: amd: acp: remove acp poweroff function
ASoC: amd: acp: clear pdm dma interrupt mask
ASoC: codecs: max98090: Allow dsp_a mode
ASoC: qcom: common: add default jack dapm pins
ASoC: loongson: fix address space confusion
ASoC: dt-bindings: microchip,sama7g5-pdmc: Simplify "microchip,mic-pos" constraints
ASoC: tegra: Remove stale comments in AHUB
ASoC: tegra: Use normal system sleep for ASRC
ALSA: hda/realtek: Add quirks for ROG ALLY CS35l41 audio
ASoC: fsl-asoc-card: Allow passing the number of slots in use
ASoC: codecs: wsa884x: Add WSA884x family of speakers
ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers
...
|
||
|
Linus Torvalds
|
3a8a670eee |
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
|
||
|
Linus Torvalds
|
84fccbba93 |
Merge tag 'spi-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"One small core feature this time around but mostly driver improvements
and additions for SPI:
- Add support for controlling the idle state of MOSI, some systems
can support this and depending on the system integration may need
it to avoid glitching in some situations
- Support for polling mode in the S3C64xx driver and DMA on the
Qualcomm QSPI driver
- Support for several Allwinner SoCs, AMD Pensando Elba, Intel Mount
Evans, Renesas RZ/V2M, and ST STM32H7"
* tag 'spi-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits)
spi: dt-bindings: atmel,at91rm9200-spi: fix broken sam9x7 compatible
spi: dt-bindings: atmel,at91rm9200-spi: add sam9x7 compatible
spi: Add support for Renesas CSI
spi: dt-bindings: Add bindings for RZ/V2M CSI
spi: sun6i: Use the new helper to derive the xfer timeout value
spi: atmel: Prevent false timeouts on long transfers
spi: dt-bindings: stm32: do not disable spi-slave property for stm32f4-f7
spi: Create a helper to derive adaptive timeouts
spi: spi-geni-qcom: correctly handle -EPROBE_DEFER from dma_request_chan()
spi: stm32: disable spi-slave property for stm32f4-f7
spi: stm32: introduction of stm32h7 SPI device mode support
spi: stm32: use dmaengine_terminate_{a}sync instead of _all
spi: stm32: renaming of spi_master into spi_controller
spi: dw: Remove misleading comment for Mount Evans SoC
spi: dt-bindings: snps,dw-apb-ssi: Add compatible for Intel Mount Evans SoC
spi: dw: Add compatible for Intel Mount Evans SoC
spi: s3c64xx: Use dev_err_probe()
spi: s3c64xx: Use the managed spi master allocation function
spi: spl022: Probe defer is no error
spi: spi-imx: fix mixing of native and gpio chipselects for imx51/imx53/imx6 variants
...
|
||
|
Linus Torvalds
|
6e17c6de3d |
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton: - Yosry Ahmed brought back some cgroup v1 stats in OOM logs - Yosry has also eliminated cgroup's atomic rstat flushing - Nhat Pham adds the new cachestat() syscall. It provides userspace with the ability to query pagecache status - a similar concept to mincore() but more powerful and with improved usability - Mel Gorman provides more optimizations for compaction, reducing the prevalence of page rescanning - Lorenzo Stoakes has done some maintanance work on the get_user_pages() interface - Liam Howlett continues with cleanups and maintenance work to the maple tree code. Peng Zhang also does some work on maple tree - Johannes Weiner has done some cleanup work on the compaction code - David Hildenbrand has contributed additional selftests for get_user_pages() - Thomas Gleixner has contributed some maintenance and optimization work for the vmalloc code - Baolin Wang has provided some compaction cleanups, - SeongJae Park continues maintenance work on the DAMON code - Huang Ying has done some maintenance on the swap code's usage of device refcounting - Christoph Hellwig has some cleanups for the filemap/directio code - Ryan Roberts provides two patch series which yield some rationalization of the kernel's access to pte entries - use the provided APIs rather than open-coding accesses - Lorenzo Stoakes has some fixes to the interaction between pagecache and directio access to file mappings - John Hubbard has a series of fixes to the MM selftesting code - ZhangPeng continues the folio conversion campaign - Hugh Dickins has been working on the pagetable handling code, mainly with a view to reducing the load on the mmap_lock - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from 128 to 8 - Domenico Cerasuolo has improved the zswap reclaim mechanism by reorganizing the LRU management - Matthew Wilcox provides some fixups to make gfs2 work better with the buffer_head code - Vishal Moola also has done some folio conversion work - Matthew Wilcox has removed the remnants of the pagevec code - their functionality is migrated over to struct folio_batch * tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits) mm/hugetlb: remove hugetlb_set_page_subpool() mm: nommu: correct the range of mmap_sem_read_lock in task_mem() hugetlb: revert use of page_cache_next_miss() Revert "page cache: fix page_cache_next/prev_miss off by one" mm/vmscan: fix root proactive reclaim unthrottling unbalanced node mm: memcg: rename and document global_reclaim() mm: kill [add|del]_page_to_lru_list() mm: compaction: convert to use a folio in isolate_migratepages_block() mm: zswap: fix double invalidate with exclusive loads mm: remove unnecessary pagevec includes mm: remove references to pagevec mm: rename invalidate_mapping_pagevec to mapping_try_invalidate mm: remove struct pagevec net: convert sunrpc from pagevec to folio_batch i915: convert i915_gpu_error to use a folio_batch pagevec: rename fbatch_count() mm: remove check_move_unevictable_pages() drm: convert drm_gem_put_pages() to use a folio_batch i915: convert shmem_sg_free_table() to use a folio_batch scatterlist: add sg_set_folio() ... |
||
|
Linus Torvalds
|
582c161cf3 |
Merge tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook: "There are three areas of note: A bunch of strlcpy()->strscpy() conversions ended up living in my tree since they were either Acked by maintainers for me to carry, or got ignored for multiple weeks (and were trivial changes). The compiler option '-fstrict-flex-arrays=3' has been enabled globally, and has been in -next for the entire devel cycle. This changes compiler diagnostics (though mainly just -Warray-bounds which is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_ coverage. In other words, there are no new restrictions, just potentially new warnings. Any new FORTIFY warnings we've seen have been fixed (usually in their respective subsystem trees). For more details, see commit |
||
|
Linus Torvalds
|
d416a46c95 |
Merge tag 'execve-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook: - Fix a few comments for correctness and typos (Baruch Siach) - Small simplifications for binfmt (Christophe JAILLET) - Set p_align to 4 for PT_NOTE in core dump (Fangrui Song) * tag 'execve-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: binfmt_elf: fix comment typo s/reset/regset/ elf: correct note name comment binfmt: Slightly simplify elf_fdpic_map_file() binfmt: Use struct_size() coredump, vmcore: Set p_align to 4 for PT_NOTE |
||
|
Linus Torvalds
|
21953eb16c |
Merge tag 'lsm-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore: - A SafeSetID patch to correct what appears to be a cut-n-paste typo in the code causing a UID to be printed where a GID was desired. This is coming via the LSM tree because we haven't been able to get a response from the SafeSetID maintainer (Micah Morton) in several months. Hopefully we are able to get in touch with Micah, but until we do I'm going to pick them up in the LSM tree. - A small fix to the reiserfs LSM xattr code. We're continuing to work through some issues with the reiserfs code as we try to fixup the LSM xattr handling, but in the process we're uncovering some ugly problems in reiserfs and we may just end up removing the LSM xattr support in reiserfs prior to reiserfs' removal. For better or worse, this shouldn't impact any of the reiserfs users, as we discovered that LSM xattrs on reiserfs were completely broken, meaning no one is currently using the combo of reiserfs and a file labeling LSM. - A tweak to how the cap_user_data_t struct/typedef is declared in the header file to appease the Sparse gods. - In the process of trying to sort out the SafeSetID lost-maintainer problem I realized that I needed to update the labeled networking entry to "Supported". - Minor comment/documentation and spelling fixes. * tag 'lsm-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: device_cgroup: Fix kernel-doc warnings in device_cgroup SafeSetID: fix UID printed instead of GID MAINTAINERS: move labeled networking to "supported" capability: erase checker warnings about struct __user_cap_data_struct lsm: fix a number of misspellings reiserfs: Initialize sec->length in reiserfs_security_init(). capability: fix kernel-doc warnings in capability.c |
||
|
Linus Torvalds
|
6a46676994 |
Merge tag 's390-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev: - Fix the style of protected key API driver source: use x-mas tree for all local variable declarations - Rework protected key API driver to not use the struct pkey_protkey and pkey_clrkey anymore. Both structures have a fixed size buffer, but with the support of ECC protected key these buffers are not big enough. Use dynamic buffers internally and transparently for userspace - Add support for a new 'non CCA clear key token' with ECC clear keys supported: ECC P256, ECC P384, ECC P521, ECC ED25519 and ECC ED448. This makes it possible to derive a protected key from the ECC clear key input via PKEY_KBLOB2PROTK3 ioctl, while currently the only way to derive is via PCKMO instruction - The s390 PMU of PAI crypto and extension 1 NNPA counters use atomic_t for reference counting. Replace this with the proper data type refcount_t - Select ARCH_SUPPORTS_INT128, but limit this to clang for now, since gcc generates inefficient code, which may lead to stack overflows - Replace one-element array with flexible-array member in struct vfio_ccw_parent and refactor the rest of the code accordingly. Also, prefer struct_size() over sizeof() open- coded versions - Introduce OS_INFO_FLAGS_ENTRY pointing to a flags field and OS_INFO_FLAG_REIPL_CLEAR flag that informs a dumper whether the system memory should be cleared or not once dumped - Fix a hang when a user attempts to remove a VFIO-AP mediated device attached to a guest: add VFIO_DEVICE_GET_IRQ_INFO and VFIO_DEVICE_SET_IRQS IOCTLs and wire up the VFIO bus driver callback to request a release of the device - Fix calculation for R_390_GOTENT relocations for modules - Allow any user space process with CAP_PERFMON capability read and display the CPU Measurement facility counter sets - Rework large statically-defined per-CPU cpu_cf_events data structure and replace it with dynamically allocated structures created when a perf_event_open() system call is invoked or /dev/hwctr device is accessed * tag 's390-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cpum_cf: rework PER_CPU_DEFINE of struct cpu_cf_events s390/cpum_cf: open access to hwctr device for CAP_PERFMON privileged process s390/module: fix rela calculation for R_390_GOTENT s390/vfio-ap: wire in the vfio_device_ops request callback s390/vfio-ap: realize the VFIO_DEVICE_SET_IRQS ioctl s390/vfio-ap: realize the VFIO_DEVICE_GET_IRQ_INFO ioctl s390/pkey: add support for ecc clear key s390/pkey: do not use struct pkey_protkey s390/pkey: introduce reverse x-mas trees s390/zcore: conditionally clear memory on reipl s390/ipl: add REIPL_CLEAR flag to os_info vfio/ccw: use struct_size() helper vfio/ccw: replace one-element array with flexible-array member s390: select ARCH_SUPPORTS_INT128 s390/pai_ext: replace atomic_t with refcount_t s390/pai_crypto: replace atomic_t with refcount_t |
||
|
Linus Torvalds
|
bc6cb4d5bc |
Merge tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double()
The cmpxchg128() family of functions is basically & functionally the
same as cmpxchg_double(), but with a saner interface.
Instead of a 6-parameter horror that forced u128 - u64/u64-halves
layout details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128
types.
- Restructure the generated atomic headers, and add kerneldoc comments
for all of the generic atomic{,64,_long}_t operations.
The generated definitions are much cleaner now, and come with
documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering when
taking multiple locks of the same type.
This gets rid of one use of lockdep_set_novalidate_class() in the
bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended variable
shadowing generating garbage code on Clang on certain ARM builds.
* tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
locking/atomic: scripts: fix ${atomic}_dec_if_positive() kerneldoc
percpu: Fix self-assignment of __old in raw_cpu_generic_try_cmpxchg()
locking/atomic: treewide: delete arch_atomic_*() kerneldoc
locking/atomic: docs: Add atomic operations to the driver basic API documentation
locking/atomic: scripts: generate kerneldoc comments
docs: scripts: kernel-doc: accept bitwise negation like ~@var
locking/atomic: scripts: simplify raw_atomic*() definitions
locking/atomic: scripts: simplify raw_atomic_long*() definitions
locking/atomic: scripts: split pfx/name/sfx/order
locking/atomic: scripts: restructure fallback ifdeffery
locking/atomic: scripts: build raw_atomic_long*() directly
locking/atomic: treewide: use raw_atomic*_<op>()
locking/atomic: scripts: add trivial raw_atomic*_<op>()
locking/atomic: scripts: factor out order template generation
locking/atomic: scripts: remove leftover "${mult}"
locking/atomic: scripts: remove bogus order parameter
locking/atomic: xtensa: add preprocessor symbols
locking/atomic: x86: add preprocessor symbols
locking/atomic: sparc: add preprocessor symbols
locking/atomic: sh: add preprocessor symbols
...
|
||
Jakub Kicinski
|
61dc651cdf |
Merge tag 'nf-next-23-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next 1) Allow slightly larger IPVS connection table size from Kconfig for 64-bit arch, from Abhijeet Rastogi. 2) Since IPVS connection table might be larger than 2^20 after previous patch, allow to limit it depending on the available memory. Moreover, use kvmalloc. From Julian Anastasov. 3) Do not rebuild VLAN header in nft_payload when matching source and destination MAC address. 4) Remove nested rcu read lock side in ip_set_test(), from Florian Westphal. 5) Allow to update set size, also from Florian. 6) Improve NAT tuple selection when connection is closing, from Florian Westphal. 7) Support for resetting set element stateful expression, from Phil Sutter. 8) Use NLA_POLICY_MAX to narrow down maximum attribute value in nf_tables, from Florian Westphal. * tag 'nf-next-23-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: limit allowed range via nla_policy netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET netfilter: snat: evict closing tcp entries on reply tuple collision netfilter: nf_tables: permit update of set size netfilter: ipset: remove rcu_read_lock_bh pair from ip_set_test netfilter: nft_payload: rebuild vlan header when needed ipvs: dynamically limit the connection hash table ipvs: increase ip_vs_conn_tab_bits range for 64BIT ==================== Link: https://lore.kernel.org/r/20230626064749.75525-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
a0433f8cae |
Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
|
||
|
Linus Torvalds
|
0aa69d53ac |
Merge tag 'for-6.5/io_uring-2023-06-23' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Nothing major in this release, just a bunch of cleanups and some
optimizations around networking mostly.
- clean up file request flags handling (Christoph)
- clean up request freeing and CQ locking (Pavel)
- support for using pre-registering the io_uring fd at setup time
(Josh)
- Add support for user allocated ring memory, rather than having the
kernel allocate it. Mostly for packing rings into a huge page (me)
- avoid an unnecessary double retry on receive (me)
- maintain ordering for task_work, which also improves performance
(me)
- misc cleanups/fixes (Pavel, me)"
* tag 'for-6.5/io_uring-2023-06-23' of git://git.kernel.dk/linux: (39 commits)
io_uring: merge conditional unlock flush helpers
io_uring: make io_cq_unlock_post static
io_uring: inline __io_cq_unlock
io_uring: fix acquire/release annotations
io_uring: kill io_cq_unlock()
io_uring: remove IOU_F_TWQ_FORCE_NORMAL
io_uring: don't batch task put on reqs free
io_uring: move io_clean_op()
io_uring: inline io_dismantle_req()
io_uring: remove io_free_req_tw
io_uring: open code io_put_req_find_next
io_uring: add helpers to decode the fixed file file_ptr
io_uring: use io_file_from_index in io_msg_grab_file
io_uring: use io_file_from_index in __io_sync_cancel
io_uring: return REQ_F_ flags from io_file_get_flags
io_uring: remove io_req_ffs_set
io_uring: remove a confusing comment above io_file_get_flags
io_uring: remove the mode variable in io_file_get_flags
io_uring: remove __io_file_supports_nowait
io_uring: wait interruptibly for request completions on exit
...
|
||
|
Linus Torvalds
|
c0a572d9d3 |
Merge tag 'v6.5/vfs.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to extend move_mount() to allow adding a mount
beneath the topmost mount of a mount stack.
There are two LWN articles about this. One covers the original patch
series in [1]. The other in [2] summarizes the session and roughly the
discussion between Al and me at LSFMM. The second article also goes
into some good questions from attendees.
Since all details are found in the relevant commit with a technical
dive into semantics and locking at the end I'm only adding the
motivation and core functionality for this from commit message and
leave out the invasive details. The code is also heavily commented and
annotated as well which was explicitly requested.
TL;DR:
> mount -t ext4 /dev/sda /mnt
|
└─/mnt /dev/sda ext4
> mount --beneath -t xfs /dev/sdb /mnt
|
└─/mnt /dev/sdb xfs
└─/mnt /dev/sda ext4
> umount /mnt
|
└─/mnt /dev/sdb xfs
The longer motivation is that various distributions are adding or are
in the process of adding support for system extensions and in the
future configuration extensions through various tools. A more detailed
explanation on system and configuration extensions can be found on the
manpage which is listed below at [3].
System extension images may – dynamically at runtime — extend the
/usr/ and /opt/ directory hierarchies with additional files. This is
particularly useful on immutable system images where a /usr/ and/or
/opt/ hierarchy residing on a read-only file system shall be extended
temporarily at runtime without making any persistent modifications.
When one or more system extension images are activated, their /usr/
and /opt/ hierarchies are combined via overlayfs with the same
hierarchies of the host OS, and the host /usr/ and /opt/ overmounted
with it ("merging"). When they are deactivated, the mount point is
disassembled — again revealing the unmodified original host version of
the hierarchy ("unmerging"). Merging thus makes the extension's
resources suddenly appear below the /usr/ and /opt/ hierarchies as if
they were included in the base OS image itself. Unmerging makes them
disappear again, leaving in place only the files that were shipped
with the base OS image itself.
System configuration images are similar but operate on directories
containing system or service configuration.
On nearly all modern distributions mount propagation plays a crucial
role and the rootfs of the OS is a shared mount in a peer group
(usually with peer group id 1):
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/ / ext4 shared:1 29 1
On such systems all services and containers run in a separate mount
namespace and are pivot_root()ed into their rootfs. A separate mount
namespace is almost always used as it is the minimal isolation
mechanism services have. But usually they are even much more isolated
up to the point where they almost become indistinguishable from
containers.
Mount propagation again plays a crucial role here. The rootfs of all
these services is a slave mount to the peer group of the host rootfs.
This is done so the service will receive mount propagation events from
the host when certain files or directories are updated.
In addition, the rootfs of each service, container, and sandbox is
also a shared mount in its separate peer group:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/ / ext4 shared:24 master:1 71 47
For people not too familiar with mount propagation, the master:1 means
that this is a slave mount to peer group 1. Which as one can see is
the host rootfs as indicated by shared:1 above. The shared:24
indicates that the service rootfs is a shared mount in a separate peer
group with peer group id 24.
A service may run other services. Such nested services will also have
a rootfs mount that is a slave to the peer group of the outer service
rootfs mount.
For containers things are just slighly different. A container's rootfs
isn't a slave to the service's or host rootfs' peer group. The rootfs
mount of a container is simply a shared mount in its own peer group:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/home/ubuntu/debian-tree / ext4 shared:99 61 60
So whereas services are isolated OS components a container is treated
like a separate world and mount propagation into it is restricted to a
single well known mount that is a slave to the peer group of the
shared mount /run on the host:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/propagate/debian-tree /run/host/incoming tmpfs master:5 71 68
Here, the master:5 indicates that this mount is a slave to the peer
group with peer group id 5. This allows to propagate mounts into the
container and served as a workaround for not being able to insert
mounts into mount namespaces directly. But the new mount api does
support inserting mounts directly. For the interested reader the
blogpost in [4] might be worth reading where I explain the old and the
new approach to inserting mounts into mount namespaces.
Containers of course, can themselves be run as services. They often
run full systems themselves which means they again run services and
containers with the exact same propagation settings explained above.
The whole system is designed so that it can be easily updated,
including all services in various fine-grained ways without having to
enter every single service's mount namespace which would be
prohibitively expensive. The mount propagation layout has been
carefully chosen so it is possible to propagate updates for system
extensions and configurations from the host into all services.
The simplest model to update the whole system is to mount on top of
/usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc
will then propagate into every service. This works cleanly the first
time. However, when the system is updated multiple times it becomes
necessary to unmount the first update on /opt, /usr, /etc and then
propagate the new update. But this means, there's an interval where
the old base system is accessible. This has to be avoided to protect
against downgrade attacks.
The vfs already exposes a mechanism to userspace whereby mounts can be
mounted beneath an existing mount. Such mounts are internally referred
to as "tucked". The patch series exposes the ability to mount beneath
a top mount through the new MOVE_MOUNT_BENEATH flag for the
move_mount() system call. This allows userspace to seamlessly upgrade
mounts. After this series the only thing that will have changed is
that mounting beneath an existing mount can be done explicitly instead
of just implicitly.
The crux is that the proposed mechanism already exists and that it is
so powerful as to cover cases where mounts are supposed to be updated
with new versions. Crucially, it offers an important flexibility.
Namely that updates to a system may either be forced or can be delayed
and the umount of the top mount be left to a service if it is a
cooperative one"
Link: https://lwn.net/Articles/927491 [1]
Link: https://lwn.net/Articles/934094 [2]
Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [3]
Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [4]
Link: https://github.com/flatcar/sysext-bakery
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2
Link: https://github.com/systemd/systemd/pull/26013
* tag 'v6.5/vfs.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: allow to mount beneath top mount
fs: use a for loop when locking a mount
fs: properly document __lookup_mnt()
fs: add path_mounted()
|
||
|
Linus Torvalds
|
64bf6ae93e |
Merge tag 'v6.5/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Miscellaneous features, cleanups, and fixes for vfs and individual fs
Features:
- Use mode 0600 for file created by cachefilesd so it can be run by
unprivileged users. This aligns them with directories which are
already created with mode 0700 by cachefilesd
- Reorder a few members in struct file to prevent some false sharing
scenarios
- Indicate that an eventfd is used a semaphore in the eventfd's
fdinfo procfs file
- Add a missing uapi header for eventfd exposing relevant uapi
defines
- Let the VFS protect transitions of a superblock from read-only to
read-write in addition to the protection it already provides for
transitions from read-write to read-only. Protecting read-only to
read-write transitions allows filesystems such as ext4 to perform
internal writes, keeping writers away until the transition is
completed
Cleanups:
- Arnd removed the architecture specific arch_report_meminfo()
prototypes and added a generic one into procfs.h. Note, we got a
report about a warning in amdpgpu codepaths that suggested this was
bisectable to this change but we concluded it was a false positive
- Remove unused parameters from split_fs_names()
- Rename put_and_unmap_page() to unmap_and_put_page() to let the name
reflect the order of the cleanup operation that has to unmap before
the actual put
- Unexport buffer_check_dirty_writeback() as it is not used outside
of block device aops
- Stop allocating aio rings from highmem
- Protecting read-{only,write} transitions in the VFS used open-coded
barriers in various places. Replace them with proper little helpers
and document both the helpers and all barrier interactions involved
when transitioning between read-{only,write} states
- Use flexible array members in old readdir codepaths
Fixes:
- Use the correct type __poll_t for epoll and eventfd
- Replace all deprecated strlcpy() invocations, whose return value
isn't checked with an equivalent strscpy() call
- Fix some kernel-doc warnings in fs/open.c
- Reduce the stack usage in jffs2's xattr codepaths finally getting
rid of this: fs/jffs2/xattr.c:887:1: error: the frame size of 1088
bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
royally annoying compilation warning
- Use __FMODE_NONOTIFY instead of FMODE_NONOTIFY where an int and not
fmode_t is required to avoid fmode_t to integer degradation
warnings
- Create coredumps with O_WRONLY instead of O_RDWR. There's a long
explanation in that commit how O_RDWR is actually a bug which we
found out with the help of Linus and git archeology
- Fix "no previous prototype" warnings in the pipe codepaths
- Add overflow calculations for remap_verify_area() as a signed
addition overflow could be triggered in xfstests
- Fix a null pointer dereference in sysv
- Use an unsigned variable for length calculations in jfs avoiding
compilation warnings with gcc 13
- Fix a dangling pipe pointer in the watch queue codepath
- The legacy mount option parser provided as a fallback by the VFS
for filesystems not yet converted to the new mount api did prefix
the generated mount option string with a leading ',' causing issues
for some filesystems
- Fix a repeated word in a comment in fs.h
- autofs: Update the ctime when mtime is updated as mandated by
POSIX"
* tag 'v6.5/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
readdir: Replace one-element arrays with flexible-array members
fs: Provide helpers for manipulating sb->s_readonly_remount
fs: Protect reconfiguration of sb read-write from racing writes
eventfd: add a uapi header for eventfd userspace APIs
autofs: set ctime as well when mtime changes on a dir
eventfd: show the EFD_SEMAPHORE flag in fdinfo
fs/aio: Stop allocating aio rings from HIGHMEM
fs: Fix comment typo
fs: unexport buffer_check_dirty_writeback
fs: avoid empty option when generating legacy mount string
watch_queue: prevent dangling pipe pointer
fs.h: Optimize file struct to prevent false sharing
highmem: Rename put_and_unmap_page() to unmap_and_put_page()
cachefiles: Allow the cache to be non-root
init: remove unused names parameter in split_fs_names()
jfs: Use unsigned variable for length calculations
fs/sysv: Null check to prevent null-ptr-deref bug
fs: use UB-safe check for signed addition overflow in remap_verify_area
procfs: consolidate arch_report_meminfo declaration
fs: pipe: reveal missing function protoypes
...
|
||
Takashi Iwai
|
a15b513756 |
Merge branch 'for-next' into for-linus
Pull the 6.5-devel branch for upstreaming. Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
Phil Sutter
|
079cd63321 |
netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET
Analogous to NFT_MSG_GETOBJ_RESET, but for set elements with a timeout or attached stateful expressions like counters or quotas - reset them all at once. Respect a per element timeout value if present to reset the 'expires' value to. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
||
|
Jakub Kicinski
|
a685d0df75 |
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-06-23
We've added 49 non-merge commits during the last 24 day(s) which contain
a total of 70 files changed, 1935 insertions(+), 442 deletions(-).
The main changes are:
1) Extend bpf_fib_lookup helper to allow passing the route table ID,
from Louis DeLosSantos.
2) Fix regsafe() in verifier to call check_ids() for scalar registers,
from Eduard Zingerman.
3) Extend the set of cpumask kfuncs with bpf_cpumask_first_and()
and a rework of bpf_cpumask_any*() kfuncs. Additionally,
add selftests, from David Vernet.
4) Fix socket lookup BPF helpers for tc/XDP to respect VRF bindings,
from Gilad Sever.
5) Change bpf_link_put() to use workqueue unconditionally to fix it
under PREEMPT_RT, from Sebastian Andrzej Siewior.
6) Follow-ups to address issues in the bpf_refcount shared ownership
implementation, from Dave Marchevsky.
7) A few general refactorings to BPF map and program creation permissions
checks which were part of the BPF token series, from Andrii Nakryiko.
8) Various fixes for benchmark framework and add a new benchmark
for BPF memory allocator to BPF selftests, from Hou Tao.
9) Documentation improvements around iterators and trusted pointers,
from Anton Protopopov.
10) Small cleanup in verifier to improve allocated object check,
from Daniel T. Lee.
11) Improve performance of bpf_xdp_pointer() by avoiding access
to shared_info when XDP packet does not have frags,
from Jesper Dangaard Brouer.
12) Silence a harmless syzbot-reported warning in btf_type_id_size(),
from Yonghong Song.
13) Remove duplicate bpfilter_umh_cleanup in favor of umd_cleanup_helper,
from Jarkko Sakkinen.
14) Fix BPF selftests build for resolve_btfids under custom HOSTCFLAGS,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
bpf, docs: Document existing macros instead of deprecated
bpf, docs: BPF Iterator Document
selftests/bpf: Fix compilation failure for prog vrf_socket_lookup
selftests/bpf: Add vrf_socket_lookup tests
bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings
bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint
bpf: Factor out socket lookup functions for the TC hookpoint.
selftests/bpf: Set the default value of consumer_cnt as 0
selftests/bpf: Ensure that next_cpu() returns a valid CPU number
selftests/bpf: Output the correct error code for pthread APIs
selftests/bpf: Use producer_cnt to allocate local counter array
xsk: Remove unused inline function xsk_buff_discard()
bpf: Keep BPF_PROG_LOAD permission checks clear of validations
bpf: Centralize permissions checks for all BPF map types
bpf: Inline map creation logic in map_create() function
bpf: Move unprivileged checks into map_create() and bpf_prog_load()
bpf: Remove in_atomic() from bpf_link_put().
selftests/bpf: Verify that check_ids() is used for scalars in regsafe()
bpf: Verify scalar ids mapping in regsafe() using check_ids()
selftests/bpf: Check if mark_chain_precision() follows scalar ids
...
====================
Link: https://lore.kernel.org/r/20230623211256.8409-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
Baruch Siach
|
0b3d412798 |
elf: correct note name comment
NT_PRFPREG note is named "CORE". Correct the comment accordingly.
Fixes:
|
||
|
Jakub Kicinski
|
e6988447c1 |
Merge tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says: ==================== Notable changes this time around: MAINTAINERS - add missing driver git trees ath11k - factory test mode support iwlwifi - config rework to drop test devices and split the different families - major update for new firmware and MLO stack - initial multi-link reconfiguration suppor - multi-BSSID and MLO improvements other - fix the last few W=1 warnings from GCC 13 - merged wireless tree to avoid conflicts * tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (245 commits) wifi: ieee80211: fix erroneous NSTR bitmap size checks wifi: rtlwifi: cleanup USB interface wifi: rtlwifi: simplify LED management wifi: ath10k: improve structure padding wifi: ath9k: convert msecs to jiffies where needed wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow wifi: iwlwifi: mvm: update two most recent GTKs on D3 resume flow wifi: iwlwifi: mvm: Refactor security key update after D3 wifi: mac80211: mark keys as uploaded when added by the driver wifi: iwlwifi: remove support of A0 version of FM RF wifi: iwlwifi: cfg: clean up Bz module firmware lines wifi: iwlwifi: pcie: add device id 51F1 for killer 1675 wifi: iwlwifi: bump FW API to 83 for AX/BZ/SC devices wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constants wifi: iwlwifi: also unify Ma device configurations wifi: iwlwifi: also unify Sc device configurations wifi: iwlwifi: unify Bz/Gl device configurations wifi: iwlwifi: pcie: also drop jacket from info macro wifi: iwlwifi: remove support for *nJ devices wifi: iwlwifi: don't load old firmware for 22000 ... ==================== Link: https://lore.kernel.org/r/20230622185602.147650-2-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
08eeccb249 |
Merge tag 'linux-can-next-for-6.5-20230622' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-06-22
The first patch is by Carsten Schmidt, targets the kvaser_usb driver
and adds len8_dlc support.
Marcel Hellwig's patch for the xilinx_can driver adds support for CAN
transceivers via the PHY framework.
Frank Jungclaus contributes 6+2 patches for the esd_usb driver in
preparation for the upcoming CAN-USB/3 support.
The 2 patches by Miquel Raynal for the sja1000 driver work around
overruns stalls on the Renesas SoCs.
The next 3 patches are by me and fix the coding style in the
rx-offload helper and in the m_can and ti_hecc driver.
Vincent Mailhol contributes 3 patches to fix and update the
calculation of the length of CAN frames on the wire.
Oliver Hartkopp's patch moves the CAN_RAW_FILTER_MAX definition into
the correct header.
The remaining 14 patches are by Jimmy Assarsson, target the
kvaser_pciefd driver and bring various updates and improvements.
* tag 'linux-can-next-for-6.5-20230622' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (33 commits)
can: kvaser_pciefd: Use TX FIFO size read from CAN controller
can: kvaser_pciefd: Refactor code
can: kvaser_pciefd: Add len8_dlc support
can: kvaser_pciefd: Use FIELD_{GET,PREP} and GENMASK where appropriate
can: kvaser_pciefd: Sort register definitions
can: kvaser_pciefd: Change return type for kvaser_pciefd_{receive,transmit,set_tx}_irq()
can: kvaser_pciefd: Rename device ID defines
can: kvaser_pciefd: Sort includes in alphabetic order
can: kvaser_pciefd: Remove SPI flash parameter read functionality
can: uapi: move CAN_RAW_FILTER_MAX definition to raw.h
can: kvaser_pciefd: Define unsigned constants with type suffix 'U'
can: kvaser_pciefd: Set hardware timestamp on transmitted packets
can: kvaser_pciefd: Add function to set skb hwtstamps
can: kvaser_pciefd: Remove handler for unused KVASER_PCIEFD_PACK_TYPE_EFRAME_ACK
can: kvaser_pciefd: Remove useless write to interrupt register
can: length: refactor frame lengths definition to add size in bits
can: length: fix bitstuffing count
can: length: fix description of the RRS field
can: m_can: fix coding style
can: ti_hecc: fix coding style
...
====================
Link: https://lore.kernel.org/r/20230622082658.571150-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
Oliver Hartkopp
|
735d86a8aa |
can: uapi: move CAN_RAW_FILTER_MAX definition to raw.h
CAN_RAW_FILTER_MAX is only relevant for CAN_RAW sockets and used in linux/can/raw.c or in userspace applications that include the raw.h file anyway. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230609121051.9631-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> |
||
Paolo Abeni
|
492432074e |
mptcp: introduce MPTCP_FULL_INFO getsockopt
Some user-space applications want to monitor the subflows utilization. Dumping the per subflow tcp_info is not enough, as the PM could close and re-create the subflows under-the-hood, fooling the accounting. Even checking the src/dst addresses used by each subflow could not be enough, because new subflows could re-use the same address/port of the just closed one. This patch introduces a new socket option, allow dumping all the relevant information all-at-once (everything, everywhere...), in a consistent manner. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/388 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Paolo Abeni
|
38967f424b |
mptcp: track some aggregate data counters
Currently there are no data transfer counters accounting for all the subflows used by a given MPTCP socket. The user-space can compute such figures aggregating the subflow info, but that is inaccurate if any subflow is closed before the MPTCP socket itself. Add the new counters in the MPTCP socket itself and expose them via the existing diag and sockopt. While touching mptcp_diag_fill_info(), acquire the relevant locks before fetching the msk data, to ensure better data consistency Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/385 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Johannes Berg
|
6c5b9a3296 |
wifi: nl80211/reg: add no-EHT regulatory flag
This just propagates to the channel flags, like no-HE and similar other flags before it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.74ce2983aed8.Ifa343ba89c11760491daad5aee5a81209d5735a7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
Michael Schmitz
|
95a55437dc |
block: change all __u32 annotations to __be32 in affs_hardblocks.h
The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.
Use u64 as type for sector address and size to allow using disks up to
2 TB without LBD support, and disks larger than 2 TB with LBD. The RBD
format allows to specify disk sizes up to 2^128 bytes (though native
OS limitations reduce this somewhat, to max 2^68 bytes), so check for
u64 overflow carefully to protect against overflowing sector_t.
This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted (now resubmitted as patch 1 of this series).
Patch 3 (this series) adds additional error checking and warning
messages. One of the error checks now makes use of the previously
unused rdb_CylBlocks field, which causes a 'sparse' warning
(cast to restricted __be32).
Annotate all 32 bit fields in affs_hardblocks.h as __be32, as the
on-disk format of RDB and partition blocks is always big endian.
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes:
|
||
Rahul Rameshbabu
|
c3b60ab7a4 |
ptp: Add .getmaxphase callback to ptp_clock_info
Enables advertisement of the maximum offset supported by the phase control functionality of PHCs. The callback is used to return an error if an offset not supported by the PHC is used in ADJ_OFFSET. The ioctls PTP_CLOCK_GETCAPS and PTP_CLOCK_GETCAPS2 now advertise the maximum offset a PHC's phase control functionality is capable of supporting. Introduce new sysfs node, max_phase_adjustment. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Veerendranath Jakkam
|
065563b20a |
wifi: cfg80211/nl80211: Add support to indicate STA MLD setup links removal
STA MLD setup links may get removed if AP MLD remove the corresponding affiliated APs with Multi-Link reconfiguration as described in P802.11be_D3.0, section 35.3.6.2.2 Removing affiliated APs. Currently, there is no support to notify such operation to cfg80211 and userspace. Add support for the drivers to indicate STA MLD setup links removal to cfg80211 and notify the same to userspace. Upon receiving such indication from the driver, clear the MLO links information of the removed links in the WDEV. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230317142153.237900-1-quic_vjakkam@quicinc.com [rename function and attribute, fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Jakub Kicinski
|
173780ff18 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/mlx5/driver.h |
||
Wen Yang
|
2d8c9dcf71 |
eventfd: add a uapi header for eventfd userspace APIs
Create a uapi header include/uapi/linux/eventfd.h, move the associated flags to the uapi header, and include it from linux/eventfd.h. Suggested-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Wen Yang <wenyang.linux@foxmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dylan Yudaken <dylany@fb.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Eric Biggers <ebiggers@google.com> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Message-Id: <tencent_2B6A999A23E86E522D5D9859D54FFCF9AA05@qq.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
Ilan Peer
|
6cf963edbb |
wifi: cfg80211: Support association to AP MLD with disabled links
An AP part of an AP MLD might be temporarily disabled, and might be enabled later. Such a link should be included in the association exchange, but should not be used until enabled. Extend the NL80211_CMD_ASSOCIATE to also indicate disabled links. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230608163202.c4c61ee4c4a5.I784ef4a0d619fc9120514b5615458fbef3b3684a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
Gilad Itzkovitch
|
2ad66fcb2f |
wifi: cfg80211: S1G rate information and calculations
Increase the size of S1G rate_info flags to support S1G and add flags for new S1G MCS and the supported bandwidths. Also, include S1G rate information to netlink STA rate message. Lastly, add rate calculation function for S1G MCS. Signed-off-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com> Link: https://lore.kernel.org/r/20230518000723.991912-1-gilad.itzkovitch@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Takashi Iwai
|
508b662b69 |
Merge branch 'topic/midi20' into for-next
As the updated MIDI 2.0 spec has been published freshly, this is a catch up to add the support for new specs, especially UMP v1.1 features, on Linux kernel. The new UMP v1.1 introduced the concept of Function Blocks (FB), which is a kind of superset of USB MIDI 2.0 Group Terminal Blocks (GTB). The patch set adds the support for FB as the primary information source while keeping the parse of GTB as fallback. Also UMP v1.1 supports the groupless messages, the protocol switch, static FBs, and other new fundamental features, and those are supported as well. Link: https://www.midi.org/midi-articles/details-about-midi-2-0-midi-ci-profiles-and-property-exchange Link: https://lore.kernel.org/r/20230612081054.17200-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
Zahari Doychev
|
7cfffd5fed |
net: flower: add support for matching cfm fields
Add support to the tc flower classifier to match based on fields in CFM information elements like level and opcode. tc filter add dev ens6 ingress protocol 802.1q \ flower vlan_id 698 vlan_ethtype 0x8902 cfm mdl 5 op 46 \ action drop Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Takashi Iwai
|
01dfa8e969 |
ALSA: ump: Add info flag bit for static blocks
UMP v1.1 spec allows to inform whether the function blocks are static and not dynamically updated. Add a new flag bit to snd_ump_endpoint_info to reflect that attribute, too. The flag is set when a USB MIDI device is still in the old MIDI 2.0 without UMP 1.1 support. Then the driver falls back to GTBs, and they are supposed to be static-only. Link: https://lore.kernel.org/r/20230612081054.17200-10-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
Takashi Iwai
|
5437ac9bad |
ALSA: seq: ump: Handle groupless messages
The UMP Utility and Stream messages are "groupless", i.e. an incoming groupless packet should be sent only to the UMP EP port, and the event with the groupless message is sent to UMP EP as is without the group translation per port. Also, the former reserved bit 0 for the client group filter is now used for groupless events. When the bit 0 is set, the groupless events are filtered out and skipped. Link: https://lore.kernel.org/r/20230612081054.17200-6-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
Takashi Iwai
|
e375b8a045 |
ALSA: ump: Add more attributes to UMP EP and FB info
Add a few more fields to snd_ump_endpoint_info and snd_ump_block_info that are added in the new v1.1 spec. Those are filled by the UMP Stream messages. The rawmidi protocol version is bumped to 2.0.4 to indicate those updates. Also, update the proc outputs to show the newly introduced fields. Link: https://lore.kernel.org/r/20230612081054.17200-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
Alexander Mikhalitsyn
|
7b26952a91 |
net: core: add getsockopt SO_PEERPIDFD
Add SO_PEERPIDFD which allows to get pidfd of peer socket holder pidfd. This thing is direct analog of SO_PEERCRED which allows to get plain PID. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: David Ahern <dsahern@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Luca Boccassi <bluca@debian.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Stanislav Fomichev <sdf@google.com> Cc: bpf@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arch@vger.kernel.org Reviewed-by: Christian Brauner <brauner@kernel.org> Acked-by: Stanislav Fomichev <sdf@google.com> Tested-by: Luca Boccassi <bluca@debian.org> Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Alexander Mikhalitsyn
|
5e2ff6704a |
scm: add SO_PASSPIDFD and SCM_PIDFD
Implement SCM_PIDFD, a new type of CMSG type analogical to SCM_CREDENTIALS, but it contains pidfd instead of plain pid, which allows programmers not to care about PID reuse problem. We mask SO_PASSPIDFD feature if CONFIG_UNIX is not builtin because it depends on a pidfd_prepare() API which is not exported to the kernel modules. Idea comes from UAPI kernel group: https://uapi-group.org/kernel-features/ Big thanks to Christian Brauner and Lennart Poettering for productive discussions about this. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: David Ahern <dsahern@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Luca Boccassi <bluca@debian.org> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arch@vger.kernel.org Tested-by: Luca Boccassi <bluca@debian.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Aaron Conole
|
e069ba07e6 |
net: openvswitch: add support for l4 symmetric hashing
Since its introduction, the ovs module execute_hash action allowed
hash algorithms other than the skb->l4_hash to be used. However,
additional hash algorithms were not implemented. This means flows
requiring different hash distributions weren't able to use the
kernel datapath.
Now, introduce support for symmetric hashing algorithm as an
alternative hash supported by the ovs module using the flow
dissector.
Output of flow using l4_sym hash:
recirc_id(0),in_port(3),eth(),eth_type(0x0800),
ipv4(dst=64.0.0.0/192.0.0.0,proto=6,frag=no), packets:30473425,
bytes:45902883702, used:0.000s, flags:SP.,
actions:hash(sym_l4(0)),recirc(0xd)
Some performance testing with no GRO/GSO, two veths, single flow:
hash(l4(0)): 4.35 GBits/s
hash(l4_sym(0)): 4.24 GBits/s
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Jakub Kicinski
|
52f79609c0 |
net: ethtool: correct MAX attribute value for stats
When compiling YNL generated code compiler complains about
array-initializer-out-of-bounds. Turns out the MAX value
for STATS_GRP uses the value for STATS.
This may lead to random corruptions in user space (kernel
itself doesn't use this value as it never parses stats).
Fixes:
|
||
Nhat Pham
|
cf264e1329 |
cachestat: implement cachestat syscall
There is currently no good way to query the page cache state of large file
sets and directory trees. There is mincore(), but it scales poorly: the
kernel writes out a lot of bitmap data that userspace has to aggregate,
when the user really doesn not care about per-page information in that
case. The user also needs to mmap and unmap each file as it goes along,
which can be quite slow as well.
Some use cases where this information could come in handy:
* Allowing database to decide whether to perform an index scan or
direct table queries based on the in-memory cache state of the
index.
* Visibility into the writeback algorithm, for performance issues
diagnostic.
* Workload-aware writeback pacing: estimating IO fulfilled by page
cache (and IO to be done) within a range of a file, allowing for
more frequent syncing when and where there is IO capacity, and
batching when there is not.
* Computing memory usage of large files/directory trees, analogous to
the du tool for disk usage.
More information about these use cases could be found in the following
thread:
https://lore.kernel.org/lkml/20230315170934.GA97793@cmpxchg.org/
This patch implements a new syscall that queries cache state of a file and
summarizes the number of cached pages, number of dirty pages, number of
pages marked for writeback, number of (recently) evicted pages, etc. in a
given range. Currently, the syscall is only wired in for x86
architecture.
NAME
cachestat - query the page cache statistics of a file.
SYNOPSIS
#include <sys/mman.h>
struct cachestat_range {
__u64 off;
__u64 len;
};
struct cachestat {
__u64 nr_cache;
__u64 nr_dirty;
__u64 nr_writeback;
__u64 nr_evicted;
__u64 nr_recently_evicted;
};
int cachestat(unsigned int fd, struct cachestat_range *cstat_range,
struct cachestat *cstat, unsigned int flags);
DESCRIPTION
cachestat() queries the number of cached pages, number of dirty
pages, number of pages marked for writeback, number of evicted
pages, number of recently evicted pages, in the bytes range given by
`off` and `len`.
An evicted page is a page that is previously in the page cache but
has been evicted since. A page is recently evicted if its last
eviction was recent enough that its reentry to the cache would
indicate that it is actively being used by the system, and that
there is memory pressure on the system.
These values are returned in a cachestat struct, whose address is
given by the `cstat` argument.
The `off` and `len` arguments must be non-negative integers. If
`len` > 0, the queried range is [`off`, `off` + `len`]. If `len` ==
0, we will query in the range from `off` to the end of the file.
The `flags` argument is unused for now, but is included for future
extensibility. User should pass 0 (i.e no flag specified).
Currently, hugetlbfs is not supported.
Because the status of a page can change after cachestat() checks it
but before it returns to the application, the returned values may
contain stale information.
RETURN VALUE
On success, cachestat returns 0. On error, -1 is returned, and errno
is set to indicate the error.
ERRORS
EFAULT cstat or cstat_args points to an invalid address.
EINVAL invalid flags.
EBADF invalid file descriptor.
EOPNOTSUPP file descriptor is of a hugetlbfs file
[nphamcs@gmail.com: replace rounddown logic with the existing helper]
Link: https://lkml.kernel.org/r/20230504022044.3675469-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20230503013608.2431726-3-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Jakub Kicinski
|
449f6bc17a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: net/sched/sch_taprio.c |
||
Andy Shevchenko
|
3a41db531e |
pktcdvd: Get rid of custom printing macros
We may use traditional dev_*() macros instead of custom ones provided by the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230310164549.22133-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
GONG, Ruiqi
|
5538213436 |
capability: erase checker warnings about struct __user_cap_data_struct
Currently Sparse warns the following when compiling kernel/capability.c:
kernel/capability.c:191:35: warning: incorrect type in argument 2
(different address spaces)
kernel/capability.c:191:35: expected void const *from
kernel/capability.c:191:35: got struct __user_cap_data_struct
[noderef] __user *
kernel/capability.c:168:14: warning: dereference of noderef expression
...... (multiple noderef warnings on different locations)
kernel/capability.c:244:29: warning: incorrect type in argument 1
(different address spaces)
kernel/capability.c:244:29: expected void *to
kernel/capability.c:244:29: got struct __user_cap_data_struct
[noderef] __user ( * )[2]
kernel/capability.c:247:42: warning: dereference of noderef expression
...... (multiple noderef warnings on different locations)
It seems that defining `struct __user_cap_data_struct` together with
`cap_user_data_t` make Sparse believe that the struct is `noderef` as
well. Separate their definitions to clarify their respective attributes.
Signed-off-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
[PM: wrapped long lines in the description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
||
Tony Krowiak
|
6afc770048 |
s390/vfio-ap: realize the VFIO_DEVICE_GET_IRQ_INFO ioctl
Realize the VFIO_DEVICE_GET_IRQ_INFO ioctl to retrieve the information for the VFIO device request IRQ. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20230530223538.279198-2-akrowiak@linux.ibm.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
Florian Westphal
|
132328e8e8 |
bpf: netfilter: Add BPF_NETFILTER bpf_attach_type
Andrii Nakryiko writes:
And we currently don't have an attach type for NETLINK BPF link.
Thankfully it's not too late to add it. I see that link_create() in
kernel/bpf/syscall.c just bypasses attach_type check. We shouldn't
have done that. Instead we need to add BPF_NETLINK attach type to enum
bpf_attach_type. And wire all that properly throughout the kernel and
libbpf itself.
This adds BPF_NETFILTER and uses it. This breaks uabi but this
wasn't in any non-rc release yet, so it should be fine.
v2: check link_attack prog type in link_create too
Fixes:
|
||
Peter Zijlstra
|
224d80c584 |
types: Introduce [us]128
Introduce [us]128 (when available). Unlike [us]64, ensure they are always naturally aligned. This also enables 128bit wide atomics (which require natural alignment) such as cmpxchg128(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20230531132323.385005581@infradead.org |
||
Ming Lei
|
b5bbc52fd0 |
ublk: add control command of UBLK_U_CMD_GET_FEATURES
Add control command of UBLK_U_CMD_GET_FEATURES for returning driver's feature set or capability. This way can simplify userspace for maintaining compatibility because userspace doesn't need to send command to one device for querying driver feature set any more. Such as, with the queried feature set, userspace can choose to use: - UBLK_CMD_GET_DEV_INFO2 or UBLK_CMD_GET_DEV_INFO, - UBLK_U_CMD_* or UBLK_CMD_* Userspace code: https://github.com/ming1/ubdsrv/commits/features-cmd Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230603040601.775227-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Louis DeLosSantos
|
8ad77e72ca |
bpf: Add table ID to bpf_fib_lookup BPF helper
Add ability to specify routing table ID to the `bpf_fib_lookup` BPF helper. A new field `tbid` is added to `struct bpf_fib_lookup` used as parameters to the `bpf_fib_lookup` BPF helper. When the helper is called with the `BPF_FIB_LOOKUP_DIRECT` and `BPF_FIB_LOOKUP_TBID` flags the `tbid` field in `struct bpf_fib_lookup` will be used as the table ID for the fib lookup. If the `tbid` does not exist the fib lookup will fail with `BPF_FIB_LKUP_RET_NOT_FWDED`. The `tbid` field becomes a union over the vlan related output fields in `struct bpf_fib_lookup` and will be zeroed immediately after usage. This functionality is useful in containerized environments. For instance, if a CNI wants to dictate the next-hop for traffic leaving a container it can create a container-specific routing table and perform a fib lookup against this table in a "host-net-namespace-side" TC program. This functionality also allows `ip rule` like functionality at the TC layer, allowing an eBPF program to pick a routing table based on some aspect of the sk_buff. As a concrete use case, this feature will be used in Cilium's SRv6 L3VPN datapath. When egress traffic leaves a Pod an eBPF program attached by Cilium will determine which VRF the egress traffic should target, and then perform a FIB lookup in a specific table representing this VRF's FIB. Signed-off-by: Louis DeLosSantos <louis.delos.devel@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230505-bpf-add-tbid-fib-lookup-v2-1-0a31c22c748c@gmail.com |
||
Vladimir Oltean
|
6c1adb650c |
net/sched: taprio: add netlink reporting for offload statistics counters
Offloading drivers may report some additional statistics counters, some of them even suggested by 802.1Q, like TransmissionOverrun. In my opinion we don't have to limit ourselves to reporting counters only globally to the Qdisc/interface, especially if the device has more detailed reporting (per traffic class), since the more detailed info is valuable for debugging and can help identifying who is exceeding its time slot. But on the other hand, some devices may not be able to report both per TC and global stats. So we end up reporting both ways, and use the good old ethtool_put_stat() strategy to determine which statistics are supported by this NIC. Statistics which aren't set are simply not reported to netlink. For this reason, we need something dynamic (a nlattr nest) to be reported through TCA_STATS_APP, and not something daft like the fixed-size and inextensible struct tc_codel_xstats. A good model for xstats which are a nlattr nest rather than a fixed struct seems to be cake. # Global stats $ tc -s qdisc show dev eth0 root # Per-tc stats $ tc -s class show dev eth0 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> |