[Why]
1. It could hit bandwidth limitdation under single dimm
memory when connecting 8K external monitor.
2. IsSupportedVidPn got validation failed with
2K240Hz eDP + 8K24Hz external monitor.
3. It's better to filter out such combination in
EnumVidPnCofuncModality
4. For short term, filter out in dc bandwidth validation.
[How]
Force 2K@240Hz+8K@24Hz timing validation false in dc.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
After gpu-reset, sometimes the driver fails to enable vblank irq,
causing flip_done timed out and the desktop freezed.
During gpu-reset, we disable and enable vblank irq in dm_suspend() and
dm_resume(). Later on in amdgpu_irq_gpu_reset_resume_helper(), we check
irqs' refcount and decide to enable or disable the irqs again.
However, we have 2 sets of API for controling vblank irq, one is
dm_vblank_get/put() and another is amdgpu_irq_get/put(). Each API has
its own refcount and flag to store the state of vblank irq, and they
are not synchronized.
In drm we use the first API to control vblank irq but in
amdgpu_irq_gpu_reset_resume_helper() we use the second set of API.
The failure happens when vblank irq was enabled by dm_vblank_get()
before gpu-reset, we have vblank->enabled true. However, during
gpu-reset, in amdgpu_irq_gpu_reset_resume_helper() vblank irq's state
checked from amdgpu_irq_update() is DISABLED. So finally it disables
vblank irq again. After gpu-reset, if there is a cursor plane commit,
the driver will try to enable vblank irq by calling drm_vblank_enable(),
but the vblank->enabled is still true, so it fails to turn on vblank
irq and causes flip_done can't be completed in vblank irq handler and
desktop become freezed.
[How]
Combining the 2 vblank control APIs by letting drm's API finally calls
amdgpu_irq's API, so the irq's refcount and state of both APIs can be
synchronized. Also add a check to prevent refcount from being less then
0 in amdgpu_irq_put().
v2:
- Add warning in amdgpu_irq_enable() if the irq is already disabled.
- Call dc_interrupt_set() in dm_set_vblank() to avoid refcount change
if it is in gpu-reset.
v3:
- Improve commit message and code comments.
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
During a suspend/resume cycle the VO power domain will be disabled and
the VOP2 registers will reset to their default values. After that the
cached register values will be out of sync and the read/modify/write
operations we do on the window registers will result in bogus values
written. Fix this by re-initializing the register cache each time we
enable the VOP2. With this the VOP2 will show a picture after a
suspend/resume cycle whereas without this the screen stays dark.
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413144347.3506023-1-s.hauer@pengutronix.de
When considering whether to mark one context as stopped and another as
started we need to look at whether the previous and new _contexts_ are
different and not just requests. Otherwise the software tracked context
start time was incorrectly updated to the most recent lite-restore time-
stamp, which was in some cases resulting in active time going backward,
until the context switch (typically the heartbeat pulse) would synchronise
with the hardware tracked context runtime. Easiest use case to observe
this behaviour was with a full screen clients with close to 100% engine
load.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: bb6287cb18 ("drm/i915: Track context current active time")
Cc: <stable@vger.kernel.org> # v5.19+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320151423.1708436-1-tvrtko.ursulin@linux.intel.com
[tursulin: Fix spelling in commit msg.]
(cherry picked from commit b3e7005187)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This reverts commit df622729dd as it introduces a use-after-free,
which isn't easy to fix without going back to the design drawing board.
Reported-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This reverts commit 97804a133c, as it builds on top of df622729dd
("drm/scheduler: track GPU active time per entity") which needs to be
reverted, as it introduces a use-after-free.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
drm_gem_prime_mmap() takes a reference on the GEM object, but before that
drm_gem_mmap_obj() already takes a reference, which will be leaked as only
one reference is dropped when the mapping is closed. Drop the extra
reference when dma_buf_mmap() succeeds.
Cc: stable@vger.kernel.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
8b/10b encoding needs to add 3% fec overhead into the pbn.
In the Synapcis Cascaded MST hub, the first stage MST branch device
needs the information to determine the timeslot count for the
second stage MST branch device. Missing this overhead will leads to
insufficient timeslot allocation.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The drm_buddy_test KUnit tests verify that returned blocks have sizes
which are powers of two using is_power_of_2(). However, is_power_of_2()
operations on a 'long', but the block size is a u64. So on systems where
long is 32-bit, this can sometimes fail even on correctly sized blocks.
This only reproduces randomly, as the parameters passed to the buddy
allocator in this test are random. The seed 0xb2e06022 reproduced it
fine here.
For now, just hardcode an is_power_of_2() implementation using
x & (x - 1).
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Arunpravin Paneer Selvam <arunpravin.paneerselvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329065532.2122295-2-davidgow@google.com
Signed-off-by: Christian König <christian.koenig@amd.com>
The nouveau code used to call drm_fb_helper_initial_config() from
nouveau_fbcon_init() before calling drm_dev_register(). This would
probe all connectors so that drm_connector->status could be used during
backlight registration which runs from nouveau_connector_late_register().
After commit 4a16dd9d18 ("drm/nouveau/kms: switch to drm fbdev helpers")
the fbdev emulation code, which now is a drm-client, can only run after
drm_dev_register(). So during backlight registration the connectors are
not probed yet and the drm_connector->status == connected check in
nv50_backlight_init() would now always fail.
Replace the drm_connector->status == connected check with
a drm_helper_probe_detect() == connected check to fix nv_backlight
no longer getting registered because of this.
Fixes: 4a16dd9d18 ("drm/nouveau/kms: switch to drm fbdev helpers")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/202
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2181941
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230326205433.36485-1-hdegoede@redhat.com
Currently i915_gem_object_is_framebuffer() doesn't treat the
BO containing the framebuffer's DPT as a framebuffer itself.
This means eg. that the shrinker can evict the DPT BO while
leaving the actual FB BO bound, when the DPT is allocated
from regular shmem.
That causes an immediate oops during hibernate as we
try to rewrite the PTEs inside the already evicted
DPT obj.
TODO: presumably this might also be the reason for the
DPT related display faults under heavy memory pressure,
but I'm still not sure how that would happen as the object
should be pinned by intel_dpt_pin() while in active use by
the display engine...
Cc: stable@vger.kernel.org
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Fixes: 0dc987b699 ("drm/i915/display: Add smem fallback allocation for dpt")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit 779cb5ba64)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Keeping DC states enabled is incompatible with the _noarm()/_arm()
split we use for writing pipe/plane registers. When DC5 and PSR
are enabled, all pipe/plane registers effectively become self-arming
on account of DC5 exit arming the update, and PSR exit latching it.
What probably saves us most of the time is that (with PIPE_MISC[21]=0)
all pipe register writes themselves trigger PSR exit, and then
we don't re-enter PSR until the idle frame count has elapsed.
So it may be that the PSR exit happens already before we've
updated the state too much.
Also the PSR1 panel (at least on this KBL) seems to discard the first
frame we trasmit, presumably still scanning out from its internal
framebuffer at that point. So only the second frame we transmit is
actually visible. But I suppose that could also be panel specific
behaviour. I haven't checked out how other PSR panels behave, nor
did I bother to check what the eDP spec has to say about this.
And since this really is all about DC states, let's switch from
the MODESET domain to the DC_OFF domain. Functionally they are
100% identical. We should probably remove the MODESET domain...
And for good measure let's toss in an assert to the place where
we do the _noarm() register writes to make sure DC states are
in fact off.
v2: Just use intel_display_power_is_enabled() (Imre)
Cc: <stable@vger.kernel.org> #v5.17+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Fixes: d13dde4495 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair")
Fixes: f8a005eb89 ("drm/i915: Optimize icl+ universal plane programming")
Fixes: 890b6ec4a5 ("drm/i915: Split skl+ plane update into noarm+arm pair")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320183532.17727-1-ville.syrjala@linux.intel.com
(cherry picked from commit 41b4c7fe72)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
