Anton Vorontsov a2dd70a11d [POWERPC] QE: get rid of most device_types and model ...

Now we're searching for "fsl,qe", "fsl,qe-muram", "fsl,qe-muram-data"
and "fsl,qe-ic".

Unfortunately it's still impossible to remove device_type = "qe"
from the existing device trees because older u-boots are looking for it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2008-01-28 08:32:55 -06:00

..

bestcomm

[POWERPC] arch/powerpc/: Spelling fixes

2007-12-20 16:15:51 +11:00

qe_lib

[POWERPC] QE: get rid of most device_types and model

2008-01-28 08:32:55 -06:00

axonram.c

[POWERPC] Clean out asm/of_{platform, device}.h from sysdev/

2007-12-06 14:44:30 +11:00

cpm1.c

[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c

2008-01-28 08:31:05 -06:00

cpm2_pic.c

[POWERPC] cpm2: Infrastructure code cleanup.

2007-10-04 11:02:04 -05:00

cpm2_pic.h

[POWERPC] cpm2: CPM2 interrupt controller fix

2007-02-07 14:03:20 +11:00

cpm2.c

[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c

2008-01-28 08:31:05 -06:00

cpm_common.c

[POWERPC] cpm: Fix a couple minor issues in cpm_common.c.

2007-11-09 03:47:44 -06:00

dart_iommu.c

[POWERPC] Fix section mismatch in dart_iommu.c

2007-08-17 11:02:06 +10:00

dart.h

[POWERPC] Use 4kB iommu pages even on 64kB-page systems

2006-11-01 14:52:48 +11:00

dcr-low.S

[POWERPC] Generic DCR infrastructure

2006-12-04 16:08:25 +11:00

dcr.c

Use dcr_host_t.base in dcr_unmap()

2007-10-15 14:29:49 -04:00

fsl_pci.c

[POWERPC] FSL: Rework PCI/PCIe support for 85xx/86xx

2008-01-23 19:31:16 -06:00

fsl_pci.h

[POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected

2007-07-23 10:27:08 -05:00

fsl_rio.c

[POWERPC] Move RapidIO support code from arch/ppc

2008-01-23 19:35:15 -06:00

fsl_rio.h

[POWERPC] Move RapidIO support code from arch/ppc

2008-01-23 19:35:15 -06:00

fsl_soc.c

[POWERPC] QE: get rid of most device_types and model

2008-01-28 08:32:55 -06:00

fsl_soc.h

[POWERPC] 85xx/86xx: refactor RSTCR reset code

2007-10-08 08:38:47 -05:00

grackle.c

[POWERPC] pci32: Add flags modifying the PCI code behaviour

2007-12-20 16:18:07 +11:00

i8259.c

[POWERPC] i8259: Add disable method

2007-11-08 14:15:29 +11:00

indirect_pci.c

[POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci

2007-10-12 14:05:17 +10:00

ipic.c

[POWERPC] Add support for mpc512x interrupts to ipic

2008-01-23 19:34:24 -06:00

ipic.h

[POWERPC] ipic: ack only for edge interrupts

2007-12-12 01:53:07 -06:00

Kconfig

[POWERPC] 4xx: PLB to PCI Express support

2007-12-23 13:12:34 -06:00

Makefile

[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c

2008-01-28 08:31:05 -06:00

micropatch.c

[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c

2008-01-28 08:31:05 -06:00

mmio_nvram.c

[POWERPC] arch/powerpc/: Spelling fixes

2007-12-20 16:15:51 +11:00

mpc8xx_pic.c

[POWERPC] 8xx: Remove sysdev/commproc.h

2008-01-28 08:31:02 -06:00

mpc8xx_pic.h

[POWERPC] 8xx: mpc885ads pcmcia support

2007-07-10 00:33:51 -05:00

mpic_msi.c

[POWERPC] Fix section mismatch in PCI code

2007-09-19 15:25:34 +10:00

mpic_pasemi_msi.c

[POWERPC] pasemi: Implement MSI support

2007-12-20 16:15:23 +11:00

mpic_u3msi.c

[POWERPC] Inline u3msi_compose_msi_msg()

2007-10-03 09:11:42 +10:00

mpic.c

[POWERPC] Fixup use of phys_addr_t in mpic code

2008-01-23 19:32:33 -06:00

mpic.h

[POWERPC] pasemi: Implement NMI support

2007-12-28 09:22:24 -06:00

mv64x60_dev.c

[POWERPC] Use for_each macros in arch/powerpc/sysdev

2008-01-17 14:56:54 +11:00

mv64x60_pci.c

[POWERPC] Use for_each macros in arch/powerpc/sysdev

2008-01-17 14:56:54 +11:00

mv64x60_pic.c

[POWERPC] Provide a default irq_host match, which matches on an exact of_node

2007-09-14 01:33:20 +10:00

mv64x60_udbg.c

[POWERPC] Use for_each macros in arch/powerpc/sysdev

2008-01-17 14:56:54 +11:00

mv64x60.h

[POWERPC] Add Marvell mv64x60 udbg putc/getc functions

2007-09-22 14:49:21 +10:00

of_rtc.c

[POWERPC] Enable RTC for Ebony and Walnut (v2)

2008-01-25 07:07:26 -06:00

pmi.c

[POWERPC] Clean out asm/of_{platform, device}.h from sysdev/

2007-12-06 14:44:30 +11:00

ppc4xx_pci.c

[POWERPC] 4xx: PCIe: Increase max busses per port to 64

2008-01-08 08:05:23 -06:00

ppc4xx_pci.h

[POWERPC] 4xx: PCI-E Link setup improvements

2007-12-23 13:18:49 -06:00

rtc_cmos_setup.c

[POWERPC] Add interrupt resource for RTC CMOS driver

2007-08-17 13:18:58 -05:00

tsi108_dev.c

[POWERPC] Use for_each macros in arch/powerpc/sysdev

2008-01-17 14:56:54 +11:00

tsi108_pci.c

[POWERPC] Provide a default irq_host match, which matches on an exact of_node

2007-09-14 01:33:20 +10:00

uic.c

[POWERPC] Use for_each macros in arch/powerpc/sysdev

2008-01-17 14:56:54 +11:00

xilinx_intc.c

[POWERPC] Xilinx: update compatible list for interrupt controller

2008-01-09 07:48:31 -07:00