Oliver Neukum 1e56f1eb2b Bluetooth: Add firmware update for Atheros 0cf3:311f ...

The device is not functional without firmware.

The device without firmware:
T:  Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=311f Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

The device with firmware:
T:  Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=3007 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2014-02-13 09:51:36 +02:00

..

ath3k.c

Bluetooth: Add firmware update for Atheros 0cf3:311f

2014-02-13 09:51:36 +02:00

bcm203x.c

Bluetooth: Use devm_kzalloc in bcm203x.c file.

2012-08-06 15:03:00 -03:00

bfusb.c

Bluetooth: Declare bfusb_table[] as const

2013-10-11 17:05:20 +02:00

bluecard_cs.c

Bluetooth: Remove pointless parameter check in bluecard_hci_send_frame()

2013-10-11 16:57:15 +02:00

bpa10x.c

Bluetooth: Declare bpa10x_table[] as const

2013-10-11 17:05:22 +02:00

bt3c_cs.c

Bluetooth: Remove pointless parameter check in bt3c_hci_send_frame()

2013-10-11 16:57:27 +02:00

btmrvl_debugfs.c

Bluetooth: replace strict_strtol() with kstrtol()

2013-07-25 14:15:25 +01:00

btmrvl_drv.h

Bluetooth: btmrvl: remove cal-data byte swapping and redundant mem copy

2013-12-04 11:09:03 -02:00

btmrvl_main.c

Bluetooth: btmrvl: remove cal-data byte swapping and redundant mem copy

2013-12-04 11:09:03 -02:00

btmrvl_sdio.c

Bluetooth: btmrvl: use cal-data from device-tree instead of conf file

2013-12-04 11:09:03 -02:00

btmrvl_sdio.h

Bluetooth: btmrvl: use cal-data from device-tree instead of conf file

2013-12-04 11:09:03 -02:00

btsdio.c

Bluetooth: Use MD SET register for changing SDIO Type-B to Type-A

2013-12-29 21:31:07 +02:00

btuart_cs.c

Bluetooth: Remove pointless parameter check in btuart_hci_send_frame()

2013-10-11 17:00:02 +02:00

btusb.c

Bluetooth: Add firmware update for Atheros 0cf3:311f

2014-02-13 09:51:36 +02:00

btwilink.c

Bluetooth: Add hdev parameter to hdev->send driver callback

2013-10-11 15:28:03 +02:00

dtl1_cs.c

Bluetooth: Remove pointless parameter check in dtl1_hci_send_frame()

2013-10-11 17:00:08 +02:00

hci_ath.c

tty: move the termios object into the tty

2012-07-16 13:00:41 -07:00

hci_bcsp.c

Bluetooth: Provide hdev parameter to hci_recv_frame() driver callback

2013-10-11 09:45:34 +02:00

hci_h4.c

Bluetooth: Remove unused h4_check_data_len() function

2013-10-11 07:51:09 +02:00

hci_h5.c

Bluetooth: Provide hdev parameter to hci_recv_frame() driver callback

2013-10-11 09:45:34 +02:00

hci_ldisc.c

Bluetooth: Remove pointless parameter check in hci_uart_send_frame()

2013-10-11 17:00:24 +02:00

hci_ll.c

Bluetooth: Add hdev parameter to hdev->send driver callback

2013-10-11 15:28:03 +02:00

hci_uart.h

Bluetooth: Add delayed init sequence support for UART controllers

2012-07-17 14:48:29 -03:00

hci_vhci.c

Bluetooth: Add support for vectored writes to virtual HCI driver

2013-12-29 21:25:52 +02:00

Kconfig

Bluetooth: btmrvl: support Marvell Bluetooth device SD8897

2013-06-12 10:20:54 -04:00

Makefile

Bluetooth: Enable -D__CHECK_ENDIAN__ for sparse by default

2013-10-02 09:10:05 +03:00