5504623785
This driver supports UART-DM HW on MSM platforms. It uses the on chip DMA to drive data transfers and has optional support for UART power management independent of Linux suspend/resume and wakeup from Rx. The driver was originally developed by Google. It is functionally equivalent to the version available at: http://android.git.kernel.org/?p=kernel/experimental.git the differences being: 1) Remove wakelocks and change unsupported DMA API. 2) Replace clock selection register codes by macros. 3) Fix checkpatch errors and add inline documentation. 4) Add runtime PM hooks for active power state transitions. 5) Handle error path and cleanup resources if required. CC: Nick Pelly <npelly@google.com> Signed-off-by: Sankalp Bose <sankalpb@codeaurora.org> Signed-off-by: Mayank Rana <mrana@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
97 lines
4.0 KiB
Makefile
97 lines
4.0 KiB
Makefile
#
|
|
# Makefile for the kernel serial device drivers.
|
|
#
|
|
|
|
obj-$(CONFIG_SERIAL_CORE) += serial_core.o
|
|
obj-$(CONFIG_SERIAL_21285) += 21285.o
|
|
|
|
# These Sparc drivers have to appear before others such as 8250
|
|
# which share ttySx minor node space. Otherwise console device
|
|
# names change and other unplesantries.
|
|
obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
|
|
obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
|
|
obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
|
|
obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
|
|
obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
|
|
|
|
obj-$(CONFIG_SERIAL_8250) += 8250.o
|
|
obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
|
|
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
|
|
obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
|
|
obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
|
|
obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
|
|
obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
|
|
obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o
|
|
obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
|
|
obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
|
|
obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
|
|
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
|
|
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
|
|
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
|
|
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
|
|
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
|
|
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
|
|
obj-$(CONFIG_SERIAL_PXA) += pxa.o
|
|
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
|
|
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
|
|
obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
|
|
obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
|
|
obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
|
|
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
|
|
obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
|
|
obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
|
|
obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
|
|
obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
|
|
obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
|
|
obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
|
|
obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
|
|
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
|
|
obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
|
|
obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o
|
|
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
|
|
obj-$(CONFIG_SERIAL_MUX) += mux.o
|
|
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
|
|
obj-$(CONFIG_SERIAL_68360) += 68360serial.o
|
|
obj-$(CONFIG_SERIAL_MCF) += mcf.o
|
|
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
|
|
obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
|
|
obj-$(CONFIG_SERIAL_DZ) += dz.o
|
|
obj-$(CONFIG_SERIAL_ZS) += zs.o
|
|
obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
|
|
obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o
|
|
obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
|
|
obj-$(CONFIG_SERIAL_IMX) += imx.o
|
|
obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o
|
|
obj-$(CONFIG_SERIAL_ICOM) += icom.o
|
|
obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o
|
|
obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
|
|
obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
|
|
obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
|
|
obj-$(CONFIG_SERIAL_SC26XX) += sc26xx.o
|
|
obj-$(CONFIG_SERIAL_JSM) += jsm/
|
|
obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
|
|
obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
|
|
obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
|
|
obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
|
|
obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
|
|
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
|
|
obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
|
|
obj-$(CONFIG_SERIAL_MSM_HS) += msm_serial_hs.o
|
|
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
|
|
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
|
|
obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
|
|
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
|
|
obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
|
|
obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
|
|
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
|
|
obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
|
|
obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
|
|
obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
|
|
obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
|
|
obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o
|
|
obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o
|
|
obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o
|
|
obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o
|
|
obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
|
|
obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o
|