Files
linux/Documentation
Sergei Shtylyov bafbdd527d phylib: Add device reset GPIO support
The PHY devices sometimes do have their reset signal (maybe even power
supply?) tied to some GPIO and sometimes it also does happen that a boot
loader does not leave it deasserted. So far this issue has been attacked
from (as I believe) a wrong angle: by teaching the MAC driver to manipulate
the GPIO in question; that solution, when applied to the device trees, led
to adding the PHY reset GPIO properties to the MAC device node, with one
exception: Cadence MACB driver which could handle the "reset-gpios" prop
in a PHY device subnode. I believe that the correct approach is to teach
the 'phylib' to get the MDIO device reset GPIO from the device tree node
corresponding to this device -- which this patch is doing...

Note that I had to modify the AT803x PHY driver as it would stop working
otherwise -- it made use of the reset GPIO for its own purposes...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>
[geert: Propagate actual errors from fwnode_get_named_gpiod()]
[geert: Avoid destroying initial setup]
[geert: Consolidate GPIO descriptor acquiring code]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05 12:51:19 -05:00
..
2017-09-22 21:57:09 +02:00
2017-11-18 11:32:27 +09:00
2017-11-01 21:32:25 -07:00
2017-03-31 12:55:11 +02:00
2017-05-16 08:44:18 -03:00
2017-09-26 14:58:23 -06:00
2017-07-14 13:51:29 -06:00
2017-08-19 11:02:53 -07:00
2017-07-14 13:51:34 -06:00
2017-07-14 13:51:42 -06:00
2017-07-14 13:51:43 -06:00
2017-07-14 13:51:43 -06:00
2017-07-14 13:51:45 -06:00
2017-07-14 13:51:45 -06:00
2017-07-14 13:51:46 -06:00
2017-07-14 13:57:58 -06:00
2017-07-14 13:57:59 -06:00
2017-07-06 08:23:30 +02:00
2017-07-07 13:14:14 +02:00
2017-07-14 13:58:04 -06:00
2017-07-14 13:58:14 -06:00
2017-07-14 13:58:10 -06:00
2017-07-14 13:58:11 -06:00