d461e96cd2
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
326 lines
7.6 KiB
Plaintext
326 lines
7.6 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
menu "Platform selection"
|
|
|
|
config ARCH_ACTIONS
|
|
bool "Actions Semi Platforms"
|
|
select OWL_TIMER
|
|
select PINCTRL
|
|
help
|
|
This enables support for the Actions Semiconductor S900 SoC family.
|
|
|
|
config ARCH_SUNXI
|
|
bool "Allwinner sunxi 64-bit SoC Family"
|
|
select ARCH_HAS_RESET_CONTROLLER
|
|
select GENERIC_IRQ_CHIP
|
|
select IRQ_DOMAIN_HIERARCHY
|
|
select IRQ_FASTEOI_HIERARCHY_HANDLERS
|
|
select PINCTRL
|
|
select RESET_CONTROLLER
|
|
select SUN4I_TIMER
|
|
help
|
|
This enables support for Allwinner sunxi based SoCs like the A64.
|
|
|
|
config ARCH_ALPINE
|
|
bool "Annapurna Labs Alpine platform"
|
|
select ALPINE_MSI if PCI
|
|
help
|
|
This enables support for the Annapurna Labs Alpine
|
|
Soc family.
|
|
|
|
config ARCH_APPLE
|
|
bool "Apple Silicon SoC family"
|
|
select APPLE_AIC
|
|
help
|
|
This enables support for Apple's in-house ARM SoC family, starting
|
|
with the Apple M1.
|
|
|
|
config ARCH_BCM2835
|
|
bool "Broadcom BCM2835 family"
|
|
select TIMER_OF
|
|
select GPIOLIB
|
|
select MFD_CORE
|
|
select PINCTRL
|
|
select PINCTRL_BCM2835
|
|
select ARM_AMBA
|
|
select ARM_GIC
|
|
select ARM_TIMER_SP804
|
|
help
|
|
This enables support for the Broadcom BCM2837 and BCM2711 SoC.
|
|
These SoCs are used in the Raspberry Pi 3 and 4 devices.
|
|
|
|
config ARCH_BCM4908
|
|
bool "Broadcom BCM4908 family"
|
|
select GPIOLIB
|
|
help
|
|
This enables support for the Broadcom BCM4906, BCM4908 and
|
|
BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be
|
|
found in home routers.
|
|
|
|
config ARCH_BCM_IPROC
|
|
bool "Broadcom iProc SoC Family"
|
|
select COMMON_CLK_IPROC
|
|
select GPIOLIB
|
|
select PINCTRL
|
|
help
|
|
This enables support for Broadcom iProc based SoCs
|
|
|
|
config ARCH_BERLIN
|
|
bool "Marvell Berlin SoC Family"
|
|
select DW_APB_ICTL
|
|
select DW_APB_TIMER_OF
|
|
select GPIOLIB
|
|
select PINCTRL
|
|
help
|
|
This enables support for Marvell Berlin SoC Family
|
|
|
|
config ARCH_BITMAIN
|
|
bool "Bitmain SoC Platforms"
|
|
help
|
|
This enables support for the Bitmain SoC Family.
|
|
|
|
config ARCH_BRCMSTB
|
|
bool "Broadcom Set-Top-Box SoCs"
|
|
select ARCH_HAS_RESET_CONTROLLER
|
|
select GENERIC_IRQ_CHIP
|
|
select PINCTRL
|
|
help
|
|
This enables support for Broadcom's ARMv8 Set Top Box SoCs
|
|
|
|
config ARCH_EXYNOS
|
|
bool "ARMv8 based Samsung Exynos SoC family"
|
|
select COMMON_CLK_SAMSUNG
|
|
select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
|
|
select EXYNOS_PMU
|
|
select PINCTRL
|
|
select PINCTRL_EXYNOS
|
|
select PM_GENERIC_DOMAINS if PM
|
|
select SOC_SAMSUNG
|
|
help
|
|
This enables support for ARMv8 based Samsung Exynos SoC family.
|
|
|
|
config ARCH_SPARX5
|
|
bool "ARMv8 based Microchip Sparx5 SoC family"
|
|
select PINCTRL
|
|
select DW_APB_TIMER_OF
|
|
help
|
|
This enables support for the Microchip Sparx5 ARMv8-based
|
|
SoC family of TSN-capable gigabit switches.
|
|
|
|
The SparX-5 Ethernet switch family provides a rich set of
|
|
switching features such as advanced TCAM-based VLAN and QoS
|
|
processing enabling delivery of differentiated services, and
|
|
security through TCAM-based frame processing using versatile
|
|
content aware processor (VCAP).
|
|
|
|
config ARCH_K3
|
|
bool "Texas Instruments Inc. K3 multicore SoC architecture"
|
|
select PM_GENERIC_DOMAINS if PM
|
|
select MAILBOX
|
|
select SOC_TI
|
|
select TI_MESSAGE_MANAGER
|
|
select TI_SCI_PROTOCOL
|
|
select TI_SCI_INTR_IRQCHIP
|
|
select TI_SCI_INTA_IRQCHIP
|
|
select TI_K3_SOCINFO
|
|
help
|
|
This enables support for Texas Instruments' K3 multicore SoC
|
|
architecture.
|
|
|
|
config ARCH_LAYERSCAPE
|
|
bool "ARMv8 based Freescale Layerscape SoC family"
|
|
select EDAC_SUPPORT
|
|
help
|
|
This enables support for the Freescale Layerscape SoC family.
|
|
|
|
config ARCH_LG1K
|
|
bool "LG Electronics LG1K SoC Family"
|
|
help
|
|
This enables support for LG Electronics LG1K SoC Family
|
|
|
|
config ARCH_HISI
|
|
bool "Hisilicon SoC Family"
|
|
select ARM_TIMER_SP804
|
|
select HISILICON_IRQ_MBIGEN if PCI
|
|
select PINCTRL
|
|
help
|
|
This enables support for Hisilicon ARMv8 SoC family
|
|
|
|
config ARCH_KEEMBAY
|
|
bool "Keem Bay SoC"
|
|
help
|
|
This enables support for Intel Movidius SoC code-named Keem Bay.
|
|
|
|
config ARCH_MEDIATEK
|
|
bool "MediaTek SoC Family"
|
|
select ARM_GIC
|
|
select PINCTRL
|
|
select MTK_TIMER
|
|
help
|
|
This enables support for MediaTek MT27xx, MT65xx, MT76xx
|
|
& MT81xx ARMv8 SoCs
|
|
|
|
config ARCH_MESON
|
|
bool "Amlogic Platforms"
|
|
select COMMON_CLK
|
|
help
|
|
This enables support for the arm64 based Amlogic SoCs
|
|
such as the s905, S905X/D, S912, A113X/D or S905X/D2
|
|
|
|
config ARCH_MVEBU
|
|
bool "Marvell EBU SoC Family"
|
|
select ARMADA_AP806_SYSCON
|
|
select ARMADA_CP110_SYSCON
|
|
select ARMADA_37XX_CLK
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select MVEBU_GICP
|
|
select MVEBU_ICU
|
|
select MVEBU_ODMI
|
|
select MVEBU_PIC
|
|
select MVEBU_SEI
|
|
select OF_GPIO
|
|
select PINCTRL
|
|
select PINCTRL_ARMADA_37XX
|
|
select PINCTRL_ARMADA_AP806
|
|
select PINCTRL_ARMADA_CP110
|
|
help
|
|
This enables support for Marvell EBU familly, including:
|
|
- Armada 3700 SoC Family
|
|
- Armada 7K SoC Family
|
|
- Armada 8K SoC Family
|
|
|
|
config ARCH_MXC
|
|
bool "ARMv8 based NXP i.MX SoC family"
|
|
select ARM64_ERRATUM_843419
|
|
select ARM64_ERRATUM_845719 if COMPAT
|
|
select IMX_GPCV2
|
|
select IMX_GPCV2_PM_DOMAINS
|
|
select PM
|
|
select PM_GENERIC_DOMAINS
|
|
select SOC_BUS
|
|
select TIMER_IMX_SYS_CTR
|
|
help
|
|
This enables support for the ARMv8 based SoCs in the
|
|
NXP i.MX family.
|
|
|
|
config ARCH_QCOM
|
|
bool "Qualcomm Platforms"
|
|
select GPIOLIB
|
|
select PINCTRL
|
|
help
|
|
This enables support for the ARMv8 based Qualcomm chipsets.
|
|
|
|
config ARCH_REALTEK
|
|
bool "Realtek Platforms"
|
|
select RESET_CONTROLLER
|
|
help
|
|
This enables support for the ARMv8 based Realtek chipsets,
|
|
like the RTD1295.
|
|
|
|
config ARCH_RENESAS
|
|
bool "Renesas SoC Platforms"
|
|
select GPIOLIB
|
|
select PINCTRL
|
|
select SOC_BUS
|
|
help
|
|
This enables support for the ARMv8 based Renesas SoCs.
|
|
|
|
config ARCH_ROCKCHIP
|
|
bool "Rockchip Platforms"
|
|
select ARCH_HAS_RESET_CONTROLLER
|
|
select PINCTRL
|
|
select PM
|
|
select ROCKCHIP_TIMER
|
|
help
|
|
This enables support for the ARMv8 based Rockchip chipsets,
|
|
like the RK3368.
|
|
|
|
config ARCH_S32
|
|
bool "NXP S32 SoC Family"
|
|
help
|
|
This enables support for the NXP S32 family of processors.
|
|
|
|
config ARCH_SEATTLE
|
|
bool "AMD Seattle SoC Family"
|
|
help
|
|
This enables support for AMD Seattle SOC Family
|
|
|
|
config ARCH_INTEL_SOCFPGA
|
|
bool "Intel's SoCFPGA ARMv8 Families"
|
|
help
|
|
This enables support for Intel's SoCFPGA ARMv8 families:
|
|
Stratix 10 (ex. Altera), Agilex and eASIC N5X.
|
|
|
|
config ARCH_SYNQUACER
|
|
bool "Socionext SynQuacer SoC Family"
|
|
|
|
config ARCH_TEGRA
|
|
bool "NVIDIA Tegra SoC Family"
|
|
select ARCH_HAS_RESET_CONTROLLER
|
|
select ARM_GIC_PM
|
|
select CLKSRC_MMIO
|
|
select TIMER_OF
|
|
select GPIOLIB
|
|
select PINCTRL
|
|
select PM
|
|
select PM_GENERIC_DOMAINS
|
|
select RESET_CONTROLLER
|
|
help
|
|
This enables support for the NVIDIA Tegra SoC family.
|
|
|
|
config ARCH_SPRD
|
|
bool "Spreadtrum SoC platform"
|
|
help
|
|
Support for Spreadtrum ARM based SoCs
|
|
|
|
config ARCH_THUNDER
|
|
bool "Cavium Inc. Thunder SoC Family"
|
|
help
|
|
This enables support for Cavium's Thunder Family of SoCs.
|
|
|
|
config ARCH_THUNDER2
|
|
bool "Cavium ThunderX2 Server Processors"
|
|
select GPIOLIB
|
|
help
|
|
This enables support for Cavium's ThunderX2 CN99XX family of
|
|
server processors.
|
|
|
|
config ARCH_UNIPHIER
|
|
bool "Socionext UniPhier SoC Family"
|
|
select ARCH_HAS_RESET_CONTROLLER
|
|
select PINCTRL
|
|
select RESET_CONTROLLER
|
|
help
|
|
This enables support for Socionext UniPhier SoC family.
|
|
|
|
config ARCH_VEXPRESS
|
|
bool "ARMv8 software model (Versatile Express)"
|
|
select GPIOLIB
|
|
select PM
|
|
select PM_GENERIC_DOMAINS
|
|
help
|
|
This enables support for the ARMv8 software model (Versatile
|
|
Express).
|
|
|
|
config ARCH_VISCONTI
|
|
bool "Toshiba Visconti SoC Family"
|
|
select PINCTRL
|
|
select PINCTRL_VISCONTI
|
|
help
|
|
This enables support for Toshiba Visconti SoCs Family.
|
|
|
|
config ARCH_VULCAN
|
|
def_bool n
|
|
|
|
config ARCH_XGENE
|
|
bool "AppliedMicro X-Gene SOC Family"
|
|
help
|
|
This enables support for AppliedMicro X-Gene SOC Family
|
|
|
|
config ARCH_ZYNQMP
|
|
bool "Xilinx ZynqMP Family"
|
|
help
|
|
This enables support for Xilinx ZynqMP Family
|
|
|
|
endmenu
|