[video] frame_generation_method = "redraw" (default) | "reprojection",
PSX_FRAME_GEN_METHOD overrides; replaces frame_generation_redraw.
- Redraw runs and allocates nothing of reprojection: no snapshots, depth
image, programs, HUD matching; the cost-spike clamp and the dynamic
resolution load formula apply to reprojection only. Switching to redraw
or turning Smooth motion off frees what reprojection held.
- Uniform locations and PSX_RP_DEBUG/PSX_RP_NOPREV are read once with the
programs.
- Each method gets its own breaker settings, set again on a switch;
frame_gen_hold takes a kind (step down / over budget), not a string.
- The warp's depth is cleared before the cars are drawn (PGXP depth tested
them LEQUAL against it).
- The warp restores the renderer's texture bindings on units 1 and 2 and
never leaves a sampler on texture 0.
- gl_frame_gen_test: redraw asserts nothing of reprojection ran or was
allocated (its phase 0.5 digest matches master's); reprojection runs
check the warp's pixels on a parallax pan (vs the redraw of the pair, no
holes, HUD exact), real frames unchanged, and no warp depth with PGXP.
- FRAME_GENERATION.md: the key, the default, reprojection and its
R4-tuned object rules.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Dynamic resolution: Smooth motion's share inflates the measured cost
instead of shrinking the period, so guest-bound detection works again
(it had pinned the level at the ceiling).
- Cost estimate: a sample more than 4x the estimate counts as 4x (one
stall no longer stops generation for many seconds); compiling the
reprojection programs is outside the timed frame.
- Reprojection source: the surface snapshotted at the real frame's present
(two slots: newer and older); the HUD and mirror of both lists are
'keep' in the depth image, drawn last, so a HUD drawn after its list
closed is kept too. Tunnel A/G/B worst ratio 2.9 -> 1.3.
- HUD needles: 2D triangles that move between the frames are drawn at
their in-between position; under them the older frame's dial shows.
- Split screen: a view whose camera cannot be fitted keeps the real image
instead of rejecting the frame (FgCamParams.keep_partial).
- Car redraw skips object triangles before the first world triangle (the
sky dome). Redundant base copies skipped when reprojecting.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each in-between frame warps the newer real frame's finished image by the
in-between camera instead of drawing the scene again:
- per game frame: a snapshot of the list's finished image (taken when the
list closes; R4 flips to a buffer before drawing into it, so the live
surface is not a stable source) and a 2x native image of camera 1/z,
pixel kind and view rasterized from the recorded triangles in painter
order (world / car-or-dome / 2D-HUD-small-view);
- per in-between frame: one grid draw (a vertex per native pixel) that
unprojects world pixels with their depth, moves them by the view's
in-between camera (fg_view_affine) and samples the snapshot at full
resolution, nearest wins; cells over depth edges or non-world pixels are
left to the snapshot underneath; 2D/HUD pixels are put back; cars are
drawn again at their own in-between position.
Measured: ~0.3-0.8 ms CPU and ~0.3-2 ms GPU per in-between frame (was 2-4
ms each), A/G/B max out-of-range 0.3-3 %, worst ratio 1.1-1.5.
[video] frame_generation_redraw / PSX_FRAME_GEN_REDRAW=1 keeps the old path.
Planner/holds: dynres 'over budget' no longer stops cheap reprojected
frames; guest-late trips ignored while they are cheap; allocation and
shader compilation are kept out of the cost estimate. frame_gen JSON:
rp_ms, rp_zn, reprojected, np (why a flip planned none); debug buffer 4 KiB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
[video] pgxp_seam = "off" | "fine" | "wide" (default off; PSX_PGXP_SEAM,
PSX_PGXP_SEAM_PX). Above 1x, a vertex that sits on a neighbour's edge only to
the PS1's precision leaves a hairline crack. Opaque 3D triangles move each
edge outward (mitred, limited at sharp corners): fine = 1 output px, wide =
half a native px; UVs, colour, q and SZ extrapolate with the barycentric
coordinates of the new corners so textures do not slide.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
[video] pgxp_color_correction (default off; PSX_PGXP_COLOR overrides). Gouraud
colour on PGXP 3D triangles interpolates with 1/SZ; textured triangles with
perspective UVs share their w. The flag rides in the per-vertex PGXP code the
depth buffer already carries (sz + 65536).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- gpu.c sends gr_set_depth_triangle only while a PGXP renderer feature is
on (gl_renderer_pgxp_render_wanted): no RTH_DEPTH per triangle otherwise.
- The SZ rides in the textured vertex's unused colour alpha, so TEXV stays
26 floats for every title.
- gl_renderer_set_pgxp_depth / _threshold / pgxp_render_stats sync with a
live render thread (GL_RT_SYNC) like their neighbours.
- A depth-mode change is its own batch-break reason (7); batch_diag returns
all eight reasons.
- Smooth-motion in-between frames replay RTH_DEPTH and test depth from
their own clear; gl_frame_gen_test gains a PGXP pass (overlapping 3D
triangles out of painter order) where the in-between frame must match
the real one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
[video] pgxp_depth_buffer (default off; PSX_PGXP_DEPTH overrides) and
pgxp_depth_threshold. gpu.c hands the GL backend each triangle's GTE SZ when
all three vertices are dataflow-precise (gr_set_depth_triangle); the backend
draws those opaque triangles with a LEQUAL depth test and write. 2D,
unproven, semi-transparent polygons, lines and rectangles never test or
write. Depth mode is a batch key and rides in every high-resolution-window,
native-wide and render-thread replay command. Clears are colourless
depth-only draws through the flat batch: after a drawing-area change or a
fill, and when the average SZ rises by the threshold (4096, as DuckStation).
Generated (Smooth motion) frames draw without depth.
Docs: ENHANCEMENTS.md G1.14.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- settings.toml parses [video] vsync = "vrr" and a launcher save writes it
back as "vrr" (was dropped / saved as "on"); every mode round-trips in
video_enhancement_settings_test.
- fg_slots counts the display intervals the clock (fg_clock_phase) fills,
with the same 0.985 phase limit. fg_plan_hz and the dynamic resolution
share use it: 59.94 Hz content on a 60 Hz panel (2.002 intervals) plans
and budgets one in-between frame, as shown, not two.
- The real share read on the emulation thread uses atomics: s_fg_flip_vb,
s_fg_swap_ema and a published copy of the generated-frame cost estimate.
- fg_hud_lerp accepts a match at the 8th 2D triangle of the window.
- docs/FRAME_GENERATION.md: the plan's slots and the vrr mode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Dynamic resolution budgets the real frames with the share of the game
frame Smooth motion leaves them (gl_renderer_frame_gen_real_share), so the
scale drops until the in-between frames fit the display refresh.
- In-between frames are timed from the game frame's arrival, not from the end
of its composition; the last one per game frame is no longer dropped by a
quarter-interval margin.
- Views under 15 % of the largest (a rear-view mirror) stay as the real frame
drew them: a wrong mirror camera fit threw its lane marks across the
screen as a dashed line.
- HUD: 2D triangles both frames draw with the same key that moved a little
(tachometer needle) are interpolated; changed digits stay as drawn.
- frame_gen JSON: end_ahead / end_bp / end_phase counters.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In-between frames go on one global grid at the display refresh (or the
VRR panel maximum), never faster, across game frames; the interpolation
phase comes from the host clock, so 90/100/144/165/240 Hz and other rates
that are no multiple of 30 work. Up to 15 generated frames per game frame.
Fix: a display buffer that changed size at the same origin (e.g. the first
frame after a save-state load) left a stale entry that every list closed
with, so no two frames ever matched and Smooth motion stayed off for the
rest of the session. The entry is replaced now. frame_gen JSON reports
why the last flip planned nothing (noplan_why).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Variable refresh (G-Sync/FreeSync, ProMotion): present each frame when it is
ready (swap interval 0). Smooth motion targets the panel's maximum refresh at
the current size (psx_sdl_display_max_refresh) and never exceeds it.
PSX_HOST_REFRESH_HZ / PSX_HOST_REFRESH_MAX_HZ simulate a display for headless
tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review of #561. Guest time now has two entry points (psx_cycles.h): the
CPU charge psx_cpu_charge() (instruction base, load fudge/region/completion,
i-cache refills, BIOS HLE costs), which applies [timing] guest_cycle_scale,
and the unscaled device advance psx_advance_cycles() (DMA, idle skips,
mul/div and GTE deadline waits). The emitters' block-mode charges emit
psx_cpu_charge; overlay DLLs accumulate it raw and publish through the
cpu_charge callback (was advance_cycles, same slot) into the same host
function, so nothing is scaled at the DLL boundary. The batched
psx_cyc_charge path, the dirty-RAM interpreter, psx_cyc_readmem, i-cache
refills and bios_hle.c all charge through it. At scale 1 it is exactly
psx_advance_cycles.
Gate in psxrecomp: [timing] guest_cycle_scale_gate, RAM predicates judged
at every VBlank edge (deterministic, works online, no mod needed), plus
psx_mod_set_guest_cycle_scale_gate() in mod_plugins.h for custom logic or
to tie the scale to a mod (guest_cycle_scale_gated = true; every mod
session reset shuts it). The carried fraction and both gate states are a
boot_state section (BS_SEC_GCS, written only when the scale is not 1), so
savestates and the netplay rollback snapshot re-simulate the same cycles.
psx_guest_cycle_scale_gate_test pins tier identity, the gates and rollback
re-simulation against the real psx_cycles.c.
OpenBIOS regenerated (emitter stamp); retail SCPH1001 is not.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No CPU is emulated: recompiled code charges the guest clock a fixed cost
per instruction. guest_cycle_scale = N charges 1/N of it (instruction,
load, mul/div, GTE latencies, overlay DLL batches) while VBlank, timers,
CD, SPU and DMA keep hardware time, so the game never runs out of frame
time. A title constant in game.toml (1 = faithful, 1..64), never a player
setting; guest_cycle_scale_gated applies it only while the title's mod
opens the gate (psx_guest_cycle_scale_gate_open). PSX_GUEST_CYCLE_SCALE
overrides for testing. A scale other than 1 is folded into the netplay
content fingerprint as a safety net.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The UI prepass re-read aperture node payloads through the RAM-folded key, so
THPS2's relocated prim arena discarded the HUD squash every frame.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
(cherry picked from commit fd6267e952)
A full-screen rect backdrop that stops short of the reveal vetoes polygon overhang (Tomba village, beads-eio.4.28).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The remaining tunnel cracks came from vertex sources, not from missing
depth: 46 % of R4 lookups were marked ambiguous because the same 3D point
is projected several times per frame (corners shared by separate meshes,
other functions), so those vertices fell back to a triangle-mean guess.
- The same point projected again is one vertex (the smaller identity, so
the choice does not follow draw order).
- Up to two different points on one pixel are kept; gpu.c picks the one
projected by the same function as the triangle's other vertices, else
the one nearest their depth.
- Per-vertex motion is no longer rounded to 1/8 px: at high internal
scales the rounding opened hairlines along long T-junction seams.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Corner and tunnel runs showed light cracks along seams and near the view
edge in generated frames:
- weld: every placed vertex at one screen position of a view moves alike
(the same corner arrives from several projections);
- a vertex without a projection on an edge between placed vertices moves
as that point of the edge (T-junctions from the game's polygon splits);
- a vertex the in-between camera passes is projected at a clamped depth,
and such a game frame is not generated (no near-plane clipping: tunnel
ceilings, overhead bridges);
- debug: "clamped", "guessed" (CPU-built vertices placed by a triangle
mean over a >1 px motion spread).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pairing triangles of consecutive draw lists by key and draw order paired
the wrong ones whenever the game reordered, culled or switched LODs (R4:
a grandstand of one repeated texture turned into a staircase; on a
synthetic version 225 of 226 pairs were wrong). No primitive is paired by
draw order any more.
gte.cpp notes each RTPS/RTPT output (only while generation is on) with an
identity (issuing ra + model-space vertex), its camera-space position and
H, indexed by screen word; gpu.c records each polygon vertex's source
ahead of the triangle (RTH_FG_SRC, never drawn). Per view the camera
motion between the two frames is fitted from the paired camera-space
vertices (RANSAC + least squares); one real frame is redrawn from the
in-between camera: world vertices re-projected, vertices moving against
the world (cars) lerped in camera space, CPU-built vertices moved with
their triangle, HUD/2D unchanged. Moving forward the older frame is
redrawn; uncovered areas show the newer real frame. A verdict rejects
the generated frame (the real one shows) without projections, with few
pairs/inliers, or with a motion no camera makes. Real frames are
unchanged (gl_frame_gen_test).
PSX_PRESENT_SHOT_BURST=N captures the next N composed frames, real and
generated, for checking in-between frames against their neighbours.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A render thread a frame behind lowers the plan's ceiling by one (recovering
one per 2 s) instead of tripping the breaker; the guest waiting on the queue
trips it only when the wait was a stall (a quarter of the game frame). The
real-frame cost plans with CPU time; the GPU span is reported only. The
generated-frame blit copies colour only and marks the stencil stale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Armed at init (session start, render-thread start, a new resolution) and on
a savestate load, game entry or window resize. While armed, an overrun jumps
straight to the highest level whose pure-area prediction is at or below
0.78, then is judged like any step; a fit after a step, an up step, a failed
judgement or 6 s disarm it and single steps fine-tune. A fixed cost only
makes the target dearer than predicted, so a jump never lands below the
level that fits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Opt-in under the render thread. Composed frames go to a ring of offscreen
slots at the window's size (binds of framebuffer 0 on the composing context
land on the current slot); a present thread with a second, shared context on
the same window waits on the slot's fence, copies it 1:1 and swaps. The
compositor's wait moves off rendering; the composing side waits only while
every slot is queued or on screen. Falls back to direct swaps when the shared
context or sync objects are unavailable.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
[video] frame_generation (opt-in, with render_thread): the render thread keeps
each game frame's replayed draw list, matches the triangles of the last two
(frame_gen.c), and presents in-between frames at the display refresh by
redrawing the newer list into separate surfaces with matched vertices
interpolated. It never runs guest code. Real frames are composed at their
flip and presented after the generated ones, with the same pixels and
order. Generation uses only measured surplus: a plan from render-thread CPU,
generated-frame cost and swap time, a breaker after backpressure or late
guest frames, and a pause while dynamic resolution is over budget. The
render-thread core gains a timed tick hook. Frame-cost queries pause around
generation, so dynamic resolution measures real frames only.
Tests: frame_gen_test, render_thread_test (tick), gl_frame_gen_test (real
frames identical off/on; phase 0/1 equal the endpoints). Docs:
docs/FRAME_GENERATION.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The hr (VRAM) surface stayed allocated at the ceiling. On GL-on-Metal every
render pass loads and stores the whole attachment, so its cost followed the
ceiling rather than the level: R4 2P VS at 5x ran 40-45 Hz for its first
seconds with a 10x ceiling and 60 Hz with surfaces allocated at 5x. Allocate
a new hr surface at each step and reseed it from the 1x image and the saved
rects; a failed allocation falls back to the in-place step down, or refuses
a step up.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A native-wide surface was allocated at the dynamic-resolution ceiling and
rendered into its lower-left corner. On GL-on-Metal every render pass loads
and stores the whole attachment, so the wide surfaces cost the ceiling's
bandwidth at every level. Allocate them at the level they render at and
reallocate at each step, rescaling the presented rows and margins from the
old surface. The limit check stays at the ceiling.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
--headless-opengl captured the presented image into the ring every frame
through gl_renderer_capture_display_hires, a sync point, so a headless
run (fp_identity) held the context for most of every frame. The capture
is now recorded at the same point of the frame (gl_renderer_ring_capture)
and done by the render thread; ring readers already sync first. A rect the
GL surface cannot serve is skipped there rather than resolved through a
CPU readback, and ensure_cpu refuses to run on the render thread at all:
its readback would land in the private upload source and mark the CPU
side current without gpu.c's array seeing the pixels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
One frame behind is the normal pipelined state when the render thread is
the slower side; skipping on it dropped nearly every present at 4K
widescreen. rt_frames_ahead() counts the complete frames queued after
the one being replayed; the backend skips only at two, where the
emulation thread is at the in-flight bound waiting on the render thread.
The unit test checks the count never exceeds the bound and that both
cases occur under a slow consumer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the render thread running, the backend's facade table records every
state change, primitive, fill, copy, CPU->VRAM upload (payload copied)
and native-wide call, and the present, into the command ring; the render
thread replays them through the unchanged glb_* functions. With it off
gl_backend_get returns the existing table and nothing new runs.
Sync points: every other GL entry point reached on the emulation thread
(readbacks, savestate restage, render passes, OpenXR, settings,
diagnostics) drains the ring and takes the context (GL_RT_SYNC); the
emulation thread then runs the rest of that frame directly, exactly as
without the thread, and hands the context back at the frame boundary when
the frame may run asynchronously again (no depth24 display, dual-raster,
frame interpolation, render pass, netplay or OpenXR).
Guest-visible VRAM stays gpu.c's array: while the render thread owns the
context, uploads stage from a private copy that receives each payload in
command order. Guest state the backend reads while drawing (per-primitive
widescreen tags, the native-wide fast-path latch) is captured at record
time; host overlays travel with the present; a present that a newer
recorded frame already supersedes is skipped. The emulation thread answers
projective/wide-present/draw-area queries from mirrors of the recorded
calls. The per-frame display-ring readback is queued (fbo_peek_deferred)
instead of being a sync point.
The GL fixtures link render_thread.c and stub the two facade hooks; the
scale fixture also gains the gpu_ws_background_requires_full_composite
stub it was already missing (it failed to link on master).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Backend-neutral core for the opt-in [video] render_thread: the emulation
thread appends records to a single-producer/single-consumer ring and the
render thread replays them in order with the graphics context current.
rt_frame_end bounds closed frames in flight (backpressure), the render
thread can tell a frame is stale, and rt_acquire is the sync point:
drain, then move the context to the emulation thread until rt_release.
No lock is held while a record executes.
render_thread_test drives it with a fake executor and context token:
ordering and payload integrity across ring wraps, oversize refusal, the
in-flight bound under a slow consumer, stale detection, randomized
acquire/release interleaving and stop while held (TSan clean).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A step controller (dynamic_resolution.c) lowers or raises the GL internal scale from frame-time telemetry between a floor and the configured ceiling; off unless a title or the player enables it. Tested by dynamic_resolution_test (synthetic load) and the real-GL gl_scale_invariance_test step modes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
gl_renderer_set_dynamic_resolution(1) keeps the hr surface and the
native-wide surfaces allocated at the scale context init gave them (the
ceiling) and lets the internal scale step to any integer level from 1 to
it while the game runs. A lower level renders into the surfaces'
lower-left VRAM*S corner; every viewport, scissor, pack, copy and capture
already takes the scale at use, so only allocation and the present's
normalised UVs read the allocated size. Off (the default) nothing is
allocated differently and no step can run.
A step runs after a present, never inside a render pass:
- it takes the top-left sample of every native block of the old surface
(the sample the pack reads) into a 1x image and reseeds the new corner
from it, so the guest-visible VRAM is unchanged byte for byte;
- it rescales the displayed rect and the draw area from their old pixels,
so neither the frame on screen nor the one being drawn shows 1x blocks;
- it rescales the native-wide margins in place, in row bands ordered so
no source row is overwritten before it is read;
- it marks the mask stencil stale (rebuilt at once while mask checking is
on) and drops the render-pass backup and images.
Reallocating per step instead measured 30-106 ms at 7x-10x on an Apple
M4, mostly the first touch of the new surface. Steps are not offered in
the windowed high-resolution mode or with dual raster.
gl_scale_invariance_test gains "steps" runs: rendering after a step into
a ceiling-sized surface equals the fixed-scale run at that level; a chain
of steps (9x down to 1x and back, 5x) leaves the native VRAM unchanged at
every step, the two rects and the wide margins exact nearest rescales of
their old pixels, everything else the old top-left samples, and mask
checking right after a step correct; the window mode refuses steps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Preserve negotiated content and dual-raster pass gates. Retain both fixture assertion sets and HD-off seams. Regenerate both BIOS with actual native emitter. Fix type-only rollback corrections and exclude extra-pad changes from digital-only promote gates.
Shokunin