Recompiler — `recompiler/src/function_analysis.cpp` now stops a
function's end_addr at its mapped `jr $ra` + delay slot instead of
stretching through trailing data. Fixes Tomba's 0x80076DB0, a real
136-byte function that was being emitted as a psx_unknown_dispatch
stub because data after it poisoned the boundary heuristic.
`code_generator.cpp` emits `func_<next>(cpu); return;` as a tail
call when a mid-function seed split leaves the physical fall-through
in a different C function, plus a `debug_server_log_call_entry` at
every function entry. `full_function_emitter.cpp` splits dispatch
into `psx_dispatch_impl(cpu, addr, stop_addr)` with public
`psx_dispatch` and new `psx_dispatch_call(cpu, addr, return_addr)`
so JAL/JALR into RAM stubs can return cleanly without growing the
native stack.
Runtime — `runtime/src/dma.c`/`include/dma.h`/`src/memory.c` now
expose `dma_write_masked()`; the 16-bit and 8-bit mmio paths route
DICR/DPCR/CHCR partial writes through it so a partial DICR write no
longer accidentally clears unrelated channels' pending IRQ flags,
and CHCR only triggers DMA when the written mask actually includes
the start bit. Unified `complete_transfer(ch)` across all channels,
removed `prev_master_flag` edge detection.
MDEC (`runtime/src/mdec.c`, `include/mdec.h`) gains a full debug
surface: `MDECDebugState` snapshot, an always-on 4096-entry
`MDECDebugEvent` ring with 11 event kinds (reset, ctrl_write,
cmd_begin/done, decode_done, dma_in/out start/end, output_drained,
read_underflow), and `mdec_state` / `mdec_trace` / `mdec_trace_clear`
debug-server commands. DMA ch0/1 emit start/end events around MDEC
transfers.
CDROM (`runtime/src/cdrom.c`, `include/cdrom.h`) — read stream
separated from one-shot pending state (`read_cmd`, `read_delay`,
`start_read_stream`, `stop_read_stream`, `deliver_read_sector`);
`cdrom_state`/`cdrom_trace` report the new fields.
Thread/fiber tracing — `traps.c`'s Win32-fiber TCB save/restore now
emits 12 thread-event kinds; new `ThreadTraceEntry` ring (64 K) plus
`thread_trace` / `thread_trace_clear` debug-server commands report
both live CPU regs and the target TCB's full saved register block.
wtrace / mmio rings — `WriteTraceEntry` grew (cpu_pc, sp, v0/v1/a0-a3/
t0/t1); capacity 1 M -> 4 M. `MmioTraceEntry` grew (pc, cpu_pc, sp,
a0-a3, sr, epc, i_stat, i_mask). Both dump commands accept
`count`/`newest=1` for reverse iteration. `restore_trace` and
`dirty_block_log` emit extended register fields (a2/a3/sp).
Misc — `interrupts.c` polls debug-server every 16K checks so it
stays responsive without a separate thread. `psx_runtime.h`'s
`call_by_address` routes through `psx_dispatch_call`. Dirty-RAM
interp JAL/JALR consult `psx_dispatch_game_compiled` when the game
is wired in. iso_reader gains the entry points needed by the game
disc path. New `tools/_tomba_probe.py` for port-4470 health checks.
Generated — regenerated `SCPH1001_dispatch.c` against the new
`psx_dispatch_impl` shape.
ISSUES.md — opened Issue #3 (BIOS PS-logo glyph missing on the
disc-detected screen, cosmetic).
.gitignore — added `recompiler/build-asan*/`, `build-checked/`,
`__pycache__/`.
Validated end-to-end: BIOS boots, disc detected, Whoopee Camp FMV
plays with audio. Frame count advances through ~40K frames without
freezes. `unknown_dispatch_log.total = 0`. Remaining FMV cluster
issues (1/4-size render, FMV-2 audio missing, no skip) tracked
under TombaRecomp/ISSUES.md.
Co-Authored-By: Codex (OpenAI) <noreply@openai.com>
Root cause of VSync counter stuck at 0: DMA completion IRQs were
deliberately suppressed in dma.c, preventing the shell's chain-E004
handler (func_1FC40628) from ever seeing I_STAT bit 3. The handler
gates all VBlank callback processing on DMA interrupt presence.
Changes:
- dma.c: directly assert i_stat bit 3 on DMA ch2/ch6 completion
(bypass DICR edge detection which gets stuck because the shell
handler only acknowledges ch3 in DICR, not ch2/ch6)
- dma.c: expose dma_get_dicr()/dma_get_dpcr() for debug server
- memory.c: add DMA register range (0x1F801080-0x1F8010FF) to
mmio_read8/write8/read16/write16 — fixes crash on DICR byte read
- debug_server.c: add DPCR/DICR to irq_state command
- seeds: add 0xBFC42BA0 (shell_vblank_dispatch), 0xBFC38AF0 (shell
hot function, 178 misses), 0xBFC137D0 (kernel RAM), 0xBFC42BE0
(shell_vblank_process), 0xBFC4226C (mid-function callback loop)
- regen: 1051 dispatch entries (was 1046)
Verified: chain-E004 handler + verify now dispatch. VSync counter
still 0 because the VBlank callback loop inside func_1FC42160 is
gated by an init-done flag and the mid-function entry mechanism is
not yet resolved. New EvCB crash at BFC12A84 exposed by DMA IRQ —
next session.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Three interrupt delivery bugs fixed that were blocking shell progression:
1. RFE after handler exit: The exception handler's normal exit path
(jmpbuf longjmp at 0xBFC10944) does not execute RFE. In our model
the handler returns to psx_check_interrupts, not to the WaitEvent
caller. Without RFE, IEc stays 0 forever after the first interrupt.
Fix: apply RFE in psx_check_interrupts if IEc is still 0 after the
handler returns.
2. GPR save/restore around handler dispatch: The handler's jmpbuf exit
restores callee-saved registers from the kernel jmpbuf (intended for
a non-local jump to WaitEvent's caller). In our model this corrupts
the interrupted code's registers. Fix: save all GPRs before handler
dispatch and restore them after, matching real hardware where the
interrupted code's registers are preserved via TCB save/restore.
3. VBlank tick gated on !in_exception: The handler runs thousands of
block leaders, each calling psx_check_interrupts. Without gating,
dispatch_count advances inside the handler, firing new VBlanks that
stack up and starve the main code. Fix: only increment dispatch_count
and fire VBlank/timer ticks when not in exception handling.
4. DMA IRQ edge-triggered: update_master_irq() was level-triggered,
re-asserting i_stat bit 3 on every call while master_flag=1. Combined
with no BIOS callback to acknowledge DMA IRQs, this caused an
interrupt storm. Fix: edge-detect master_flag 0->1 transition, and
suppress DMA completion IRQs entirely since transfers are synchronous.
Also adds GPU debug diagnostics: GP0 command counters (nop/fill/draw/
env/copy), draw area/offset in gpu_state, vram_peek debug command.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Matthew Stanley