Bluetooth Wii Remote support: Wii Remote / Wii Wheel, Nunchuk and Classic Controller through KPAD (#73)

* Bluetooth Wii Remote support: the game reads a real Wii Remote through KPAD

Enable SDL3's HIDAPI Wii driver and hand a paired Wii Remote (bare or with
Nunchuk) to the game as a real Wii Remote: WPADProbe reports CORE/FREESTYLE
and KPADRead fills KPADStatus[0] from SDL every frame (buttons, accelerometer
in KPAD's g frame, Nunchuk stick and accelerometer), while the GameCube pad
view of that port reports no controller. The game's own motion code then
handles wheelies, tricks and Wii Wheel steering. Classic Controllers and
Wii U Pro Controllers keep going through the GameCube pad path with a default
button table picked by name.

SDL's Wii driver drops a remote on a failed Bluetooth read or when the
Nunchuk is plugged or unplugged and never re-adds it, so the runtime keeps
rescanning (Dolphin style) while no Wii controller is present by toggling the
driver hint off and, a few frames later, on again; a dropped remote is back
within 1-2 s. Settings live in the F10 overlay under Wii Remotes (Bluetooth)
and in Config.toml (wii_remotes, wii_continuous_scan).

* Fix Wii U Pro / Classic Controller ZL and ZR not registering

SDL's Wii driver reports ZL/ZR as the LEFT_TRIGGER/RIGHT_TRIGGER analog
axes, never as digital shoulder buttons. Binding them to
LEFT_SHOULDER/RIGHT_SHOULDER meant they never fired and also disabled
aurora's own analog-trigger fallback (a button table entry for
PAD_TRIGGER_L/R marks the trigger as "handled", even when the bound
digital button never actually presses). Leaving them unbound lets the
default axis mapping drive them like every other analog-trigger pad.

Reported by an end-to-end tester connecting a real Classic Controller to
a Wii Remote.

* Wii Remotes menu: live raw D-pad/ZL/ZR readout for Classic Controller / Wii U Pro

Diagnostic aid for a reported issue where the Classic Controller's D-pad
does not do anything in-game (no wheelies). Shows what SDL itself sees so
a driver-level problem (nothing lights up) can be told apart from a
mapping problem (it lights up but the game does not react).

* Fix Classic Controller D-pad input

* Address CodeRabbit review on PR #73

- PADRead: hide KPAD-served ports even while input is blocked so the port
  error state does not flip when the overlay opens/closes.
- WPADProbe: run the Wii Remote rescan state machine before probing so a
  reconnect probe before the next PADRead can see the remote.
- EnsureSensors: only cache the gamepad id once every accelerometer enabled,
  so a failed activation is retried.
- ConfigureSdlHints: reset the in-flight rescan bookkeeping.
- Settings overlay: disable "Rescan now" while Wii Remotes are turned off.

* Bluetooth Wii Remote: fix wheel steering, native Classic Controller, extension hot-swap

Accelerometer
- The SDL -> KPAD conversion negated the wrong axis: SDL's z is the remote's
  +Y (towards the user), so KPAD acc is (-wiiX, -wiiZ, +wiiY). Fixes mirrored
  Wii Wheel steering.
- Drop reports whose accelerometer bytes arrive zeroed (+-5.12 g on every axis,
  a few times a minute over Bluetooth) and repeat the last good sample; they
  read as a full-lock steer plus a 9 g shake.
- One-button zero-point calibration in the overlay (remote flat, buttons up),
  stored in Config.toml as wii_accel_offset_x/y/z. SDL's read of the remote's
  factory calibration times out over Bluetooth and falls back to a nominal
  zero point, which left a per-axis bias of up to ~0.3 g on the tested remote.
- Live accelerometer readout and an optional per-frame CSV trace
  (wii_accel_trace = true) for debugging.

Classic Controller through KPAD/WPAD
- WPADProbe reports WPAD_DEV_CLASSIC; KPADRead fills ex_status.cl and
  KPADGetUnifiedWpadStatus the raw WPADCLStatus (WPAD_CL_BUTTON_* bits, sticks
  in the SDK's signed -512..511 range, triggers), so the game shows the Classic
  layout and icons and no button mapping is involved. Ports served through KPAD
  are hidden from PADRead; only the Wii U Pro Controller stays a GameCube pad.

Extension hot-swap
- SDL's Wii driver destroys the joystick on an extension change but keeps the
  HID handle open, and HIDAPI never re-creates a joystick for such a device.
  Patch the vendored SDL at configure time (AuroraSDL3Patches.cmake, wired into
  AuroraSDL3Provider.cmake for both the downloaded tarball and a pre-provided
  FETCHCONTENT_SOURCE_DIR_SDL) so the joystick is rebuilt in place with the new
  extension type, without touching the Bluetooth handle.
- Keep a vanished remote's channel alive with neutral input for up to 3 s while
  SDL re-creates the joystick, so the game never sees a disconnection. The
  driver-hint rescan stays as a fallback for real drops, starting 3 s after
  the loss, and also runs from the overlay's per-frame Draw. Log rescans.

Mappings / overlay
- Do not apply the shared positional [controller] bindings to Wii pads: that
  override is what made a Classic Controller's A/B and X/Y look swapped.
- Raw D-pad fallback also for the Wii U Pro Controller; overlay readouts read
  joystick buttons directly (SDL's generated HIDAPI mapping expects a hat).
- Overlay: Classic Controller readout, accelerometer readout and calibration.
- README: Bluetooth Wii Remote section and known limitations.

* Review pass on the Wii Remote input path

- EffectiveKind: stop bridging an extension swap once a different controller
  has taken the port, and note that everything touching the scanner state runs
  on the guest thread.
- KPADGetUnifiedWpadStatus: fill every requested entry (the SDK returns `count`
  recent samples), capped at KPAD's 16 read buffers.
- IsKpadKind gets internal linkage; the calibration accessors get their
  comments; clarify why Draw() also runs Poll().

* Drop the dead Classic-Controller-as-GameCube-pad matching

A Wii Remote with a Classic Controller is served through KPAD and its port is
hidden from PADRead, so the name matches that once gave it a GameCube button
table and the raw D-pad fallback could never take effect any more. Both now
match only the Wii U Pro Controller, and the default table is renamed
accordingly (g_defaultButtonsWiiUPro).

---------

Co-authored-by: LOL <andresguerra2k26@gmail.com>
Co-authored-by: Nick <89667145+Nick1232345@users.noreply.github.com>

runtime/include/runtime_config.h

@@ -8,6 +8,7 @@
 #include <cstdint>
 #include <filesystem>
 #include <fstream>
+#include <iomanip>
 #include <iostream>
 #include <limits>
 #include <optional>
@@ -53,6 +54,25 @@ struct RuntimeUserConfig {
     std::optional<bool> audioMuted;
     std::optional<bool> audioMixWorker;
     std::optional<bool> attenuateMusicWhenMediaPlays;
+    // Real Wii Remotes (with or without Nunchuk / Classic Controller) and Wii U Pro
+    // Controllers paired over Bluetooth, driven by SDL's HIDAPI Wii driver. The driver
+    // is opt-in on SDL's side, so this decides whether the runtime turns it on.
+    std::optional<bool> wiiRemotes;
+    // Keep re-enumerating Bluetooth HID devices while no Wii controller is connected
+    // (Dolphin's "continuous scanning"), so a remote that dropped or was switched on
+    // after launch shows up without restarting.
+    std::optional<bool> wiiContinuousScan;
+    // Accelerometer zero-point correction for the Bluetooth Wii Remote, in g and in
+    // SDL's sensor frame (x right, y out of the button face, z towards the user).
+    // SDL's Wii driver falls back to a nominal zero point when its read of the
+    // remote's calibration block times out (common over Bluetooth), so this is
+    // measured in the overlay with the remote at rest.
+    std::optional<double> wiiAccelOffsetX;
+    std::optional<double> wiiAccelOffsetY;
+    std::optional<double> wiiAccelOffsetZ;
+    // Debugging aid: append every KPAD sample of the Bluetooth remote (raw and
+    // corrected accelerometer, buttons) to wii_accel_trace.csv next to Config.toml.
+    std::optional<bool> wiiAccelTrace;
     std::optional<bool> networkEnabled;
     std::optional<bool> discordPresenceEnabled;
     // The application ID of the WiiCompiled Discord application. This is only
@@ -375,6 +395,7 @@ inline void AppendOverlayRoots(RuntimeUserConfig& config, const std::string& roo
     }
 }
 
+// Reads every supported setting out of a parsed Config.toml document.
 inline RuntimeUserConfig ParseConfigDocument(const toml::value& document) {
     RuntimeUserConfig config;
 
@@ -440,6 +461,12 @@ inline RuntimeUserConfig ParseConfigDocument(const toml::value& document) {
     config.audioMixWorker = FindConfigValue<bool>(document, "audio", "mix_worker");
     config.attenuateMusicWhenMediaPlays =
         FindConfigValue<bool>(document, "audio", "attenuate_music_when_media_plays");
+    config.wiiRemotes = FindConfigValue<bool>(document, "controller", "wii_remotes");
+    config.wiiContinuousScan = FindConfigValue<bool>(document, "controller", "wii_continuous_scan");
+    config.wiiAccelOffsetX = FindConfigValue<double>(document, "controller", "wii_accel_offset_x");
+    config.wiiAccelOffsetY = FindConfigValue<double>(document, "controller", "wii_accel_offset_y");
+    config.wiiAccelOffsetZ = FindConfigValue<double>(document, "controller", "wii_accel_offset_z");
+    config.wiiAccelTrace = FindConfigValue<bool>(document, "controller", "wii_accel_trace");
     config.networkEnabled = FindConfigValue<bool>(document, "network", "enabled");
     config.discordPresenceEnabled = FindConfigValue<bool>(document, "discord", "enabled");
     config.discordClientId = FindConfigValue<std::string>(document, "discord", "client_id");
@@ -759,14 +786,75 @@ inline bool AudioMixWorkerEnabled(bool fallback = true) {
     return Get().audioMixWorker.value_or(fallback);
 }
 
+// Whether background music should duck automatically for other media playback.
 inline bool AttenuateMusicWhenMediaPlays(bool fallback = false) {
     return Get().attenuateMusicWhenMediaPlays.value_or(fallback);
 }
 
+// Bluetooth Wii Remotes / Wii U Pro Controllers. Read once before SDL's joystick
+// subsystem comes up, so a change only takes effect on the next launch.
+inline bool WiiRemotesEnabled(bool fallback = true) {
+    return Get().wiiRemotes.value_or(fallback);
+}
+
+// Persists the Bluetooth Wii Remote driver switch.
+inline bool SetWiiRemotesEnabled(bool value) {
+    Mutable().wiiRemotes = value;
+    return WriteSetting("controller", "wii_remotes", value ? "true" : "false");
+}
+
+// Whether to keep rescanning Bluetooth while no Wii controller is connected.
+inline bool WiiContinuousScanEnabled(bool fallback = true) {
+    return Get().wiiContinuousScan.value_or(fallback);
+}
+
+// Persists the continuous scanning switch.
+inline bool SetWiiContinuousScanEnabled(bool value) {
+    Mutable().wiiContinuousScan = value;
+    return WriteSetting("controller", "wii_continuous_scan", value ? "true" : "false");
+}
+
+// Wii Remote accelerometer zero-point correction (g, SDL sensor frame); all zero
+// when the remote has not been calibrated.
+inline std::array<double, 3> WiiAccelOffset() {
+    const RuntimeUserConfig& config = Get();
+    return {config.wiiAccelOffsetX.value_or(0.0), config.wiiAccelOffsetY.value_or(0.0),
+            config.wiiAccelOffsetZ.value_or(0.0)};
+}
+
+// Whether to write the per-frame accelerometer trace (off unless asked for).
+inline bool WiiAccelTraceEnabled(bool fallback = false) {
+    return Get().wiiAccelTrace.value_or(fallback);
+}
+
+// True while a non-zero correction is stored ("Clear calibration" writes zeros).
+inline bool HasWiiAccelOffset() {
+    const std::array<double, 3> offset = WiiAccelOffset();
+    return offset[0] != 0.0 || offset[1] != 0.0 || offset[2] != 0.0;
+}
+
+// Persists the accelerometer correction measured by the overlay's calibration.
+inline bool SetWiiAccelOffset(const std::array<double, 3>& offset) {
+    Mutable().wiiAccelOffsetX = offset[0];
+    Mutable().wiiAccelOffsetY = offset[1];
+    Mutable().wiiAccelOffsetZ = offset[2];
+    bool ok = true;
+    const char* keys[3] = {"wii_accel_offset_x", "wii_accel_offset_y", "wii_accel_offset_z"};
+    for (size_t i = 0; i < 3; ++i) {
+        // Always a float literal, so a whole-number offset does not come back as a TOML integer.
+        std::ostringstream formatted;
+        formatted << std::fixed << std::setprecision(4) << offset[i];
+        ok = WriteSetting("controller", keys[i], formatted.str()) && ok;
+    }
+    return ok;
+}
+
+// Target frame rate for frame interpolation, or 0 to disable it.
 inline uint32_t FrameInterpolationFps(uint32_t fallback = 0) {
     return Get().frameInterpolationFps.value_or(fallback);
 }
 
+// Whether to skip draws whose graphics pipeline has not finished compiling yet.
 inline bool SkipUnreadyPipelines(bool fallback = true) {
     return Get().skipUnreadyPipelines.value_or(fallback);
 }