2 Commits

Author	SHA1	Message	Date
patchzyy	d3d0de62a6	Throttle SDL logs and gate Wii rescans (#129) ... * Throttle SDL logs and gate Wii rescans * Clarify Wii remote scan state in overlay	2026-09-03 23:29:49 +02:00
Javier R Bueno	ca7d126a13	Bluetooth Wii Remote support: Wii Remote / Wii Wheel, Nunchuk and Classic Controller through KPAD (#73) ... * Bluetooth Wii Remote support: the game reads a real Wii Remote through KPAD Enable SDL3's HIDAPI Wii driver and hand a paired Wii Remote (bare or with Nunchuk) to the game as a real Wii Remote: WPADProbe reports CORE/FREESTYLE and KPADRead fills KPADStatus[0] from SDL every frame (buttons, accelerometer in KPAD's g frame, Nunchuk stick and accelerometer), while the GameCube pad view of that port reports no controller. The game's own motion code then handles wheelies, tricks and Wii Wheel steering. Classic Controllers and Wii U Pro Controllers keep going through the GameCube pad path with a default button table picked by name. SDL's Wii driver drops a remote on a failed Bluetooth read or when the Nunchuk is plugged or unplugged and never re-adds it, so the runtime keeps rescanning (Dolphin style) while no Wii controller is present by toggling the driver hint off and, a few frames later, on again; a dropped remote is back within 1-2 s. Settings live in the F10 overlay under Wii Remotes (Bluetooth) and in Config.toml (wii_remotes, wii_continuous_scan). * Fix Wii U Pro / Classic Controller ZL and ZR not registering SDL's Wii driver reports ZL/ZR as the LEFT_TRIGGER/RIGHT_TRIGGER analog axes, never as digital shoulder buttons. Binding them to LEFT_SHOULDER/RIGHT_SHOULDER meant they never fired and also disabled aurora's own analog-trigger fallback (a button table entry for PAD_TRIGGER_L/R marks the trigger as "handled", even when the bound digital button never actually presses). Leaving them unbound lets the default axis mapping drive them like every other analog-trigger pad. Reported by an end-to-end tester connecting a real Classic Controller to a Wii Remote. * Wii Remotes menu: live raw D-pad/ZL/ZR readout for Classic Controller / Wii U Pro Diagnostic aid for a reported issue where the Classic Controller's D-pad does not do anything in-game (no wheelies). Shows what SDL itself sees so a driver-level problem (nothing lights up) can be told apart from a mapping problem (it lights up but the game does not react). * Fix Classic Controller D-pad input * Address CodeRabbit review on PR #73 - PADRead: hide KPAD-served ports even while input is blocked so the port error state does not flip when the overlay opens/closes. - WPADProbe: run the Wii Remote rescan state machine before probing so a reconnect probe before the next PADRead can see the remote. - EnsureSensors: only cache the gamepad id once every accelerometer enabled, so a failed activation is retried. - ConfigureSdlHints: reset the in-flight rescan bookkeeping. - Settings overlay: disable "Rescan now" while Wii Remotes are turned off. * Bluetooth Wii Remote: fix wheel steering, native Classic Controller, extension hot-swap Accelerometer - The SDL -> KPAD conversion negated the wrong axis: SDL's z is the remote's +Y (towards the user), so KPAD acc is (-wiiX, -wiiZ, +wiiY). Fixes mirrored Wii Wheel steering. - Drop reports whose accelerometer bytes arrive zeroed (+-5.12 g on every axis, a few times a minute over Bluetooth) and repeat the last good sample; they read as a full-lock steer plus a 9 g shake. - One-button zero-point calibration in the overlay (remote flat, buttons up), stored in Config.toml as wii_accel_offset_x/y/z. SDL's read of the remote's factory calibration times out over Bluetooth and falls back to a nominal zero point, which left a per-axis bias of up to ~0.3 g on the tested remote. - Live accelerometer readout and an optional per-frame CSV trace (wii_accel_trace = true) for debugging. Classic Controller through KPAD/WPAD - WPADProbe reports WPAD_DEV_CLASSIC; KPADRead fills ex_status.cl and KPADGetUnifiedWpadStatus the raw WPADCLStatus (WPAD_CL_BUTTON_* bits, sticks in the SDK's signed -512..511 range, triggers), so the game shows the Classic layout and icons and no button mapping is involved. Ports served through KPAD are hidden from PADRead; only the Wii U Pro Controller stays a GameCube pad. Extension hot-swap - SDL's Wii driver destroys the joystick on an extension change but keeps the HID handle open, and HIDAPI never re-creates a joystick for such a device. Patch the vendored SDL at configure time (AuroraSDL3Patches.cmake, wired into AuroraSDL3Provider.cmake for both the downloaded tarball and a pre-provided FETCHCONTENT_SOURCE_DIR_SDL) so the joystick is rebuilt in place with the new extension type, without touching the Bluetooth handle. - Keep a vanished remote's channel alive with neutral input for up to 3 s while SDL re-creates the joystick, so the game never sees a disconnection. The driver-hint rescan stays as a fallback for real drops, starting 3 s after the loss, and also runs from the overlay's per-frame Draw. Log rescans. Mappings / overlay - Do not apply the shared positional [controller] bindings to Wii pads: that override is what made a Classic Controller's A/B and X/Y look swapped. - Raw D-pad fallback also for the Wii U Pro Controller; overlay readouts read joystick buttons directly (SDL's generated HIDAPI mapping expects a hat). - Overlay: Classic Controller readout, accelerometer readout and calibration. - README: Bluetooth Wii Remote section and known limitations. * Review pass on the Wii Remote input path - EffectiveKind: stop bridging an extension swap once a different controller has taken the port, and note that everything touching the scanner state runs on the guest thread. - KPADGetUnifiedWpadStatus: fill every requested entry (the SDK returns `count` recent samples), capped at KPAD's 16 read buffers. - IsKpadKind gets internal linkage; the calibration accessors get their comments; clarify why Draw() also runs Poll(). * Drop the dead Classic-Controller-as-GameCube-pad matching A Wii Remote with a Classic Controller is served through KPAD and its port is hidden from PADRead, so the name matches that once gave it a GameCube button table and the raw D-pad fallback could never take effect any more. Both now match only the Wii U Pro Controller, and the default table is renamed accordingly (g_defaultButtonsWiiUPro). --------- Co-authored-by: LOL <andresguerra2k26@gmail.com> Co-authored-by: Nick <89667145+Nick1232345@users.noreply.github.com>	2026-09-01 21:47:31 +02:00