## Summary
This PR removes most of the syntax errors from the test cases. This
would create noise when https://github.com/astral-sh/ruff/pull/11901 is
complete. These syntax errors are also just noise for the test itself.
## Test Plan
Update the snapshots and verify that they're still the same.
## Summary
This PR is a follow-up on #11845 to add the re-lexing logic for normal
list parsing.
A normal list parsing is basically parsing elements without any
separator in between i.e., there can only be trivia tokens in between
the two elements. Currently, this is only being used for parsing
**assignment statement** and **f-string elements**. Assignment
statements cannot be in a parenthesized context, but f-string can have
curly braces so this PR is specifically for them.
I don't think this is an ideal recovery but the problem is that both
lexer and parser could add an error for f-strings. If the lexer adds an
error it'll emit an `Unknown` token instead while the parser adds the
error directly. I think we'd need to move all f-string errors to be
emitted by the parser instead. This way the parser can correctly inform
the lexer that it's out of an f-string and then the lexer can pop the
current f-string context out of the stack.
## Test Plan
Add test cases, update the snapshots, and run the fuzzer.
## Summary
Fixes https://github.com/astral-sh/ruff-vscode/issues/496.
Cells are no longer removed from the notebook index when a notebook gets
updated, but rather when `textDocument/didClose` is called for them.
This solves an issue where their premature removal from the notebook
cell index would cause their URL to be un-queryable in the
`textDocument/didClose` handler.
## Test Plan
Create and then delete a notebook cell in VS Code. No error should
appear.
## Summary
This PR implements the re-lexing logic in the parser.
This logic is only applied when recovering from an error during list
parsing. The logic is as follows:
1. During list parsing, if an unexpected token is encountered and it
detects that an outer context can understand it and thus recover from
it, it invokes the re-lexing logic in the lexer
2. This logic first checks if the lexer is in a parenthesized context
and returns if it's not. Thus, the logic is a no-op if the lexer isn't
in a parenthesized context
3. It then reduces the nesting level by 1. It shouldn't reset it to 0
because otherwise the recovery from nested list parsing will be
incorrect
4. Then, it tries to find last newline character going backwards from
the current position of the lexer. This avoids any whitespaces but if it
encounters any character other than newline or whitespace, it aborts.
5. Now, if there's a newline character, then it needs to be re-lexed in
a logical context which means that the lexer needs to emit it as a
`Newline` token instead of `NonLogicalNewline`.
6. If the re-lexing gives a different token than the current one, the
token source needs to update it's token collection to remove all the
tokens which comes after the new current position.
It turns out that the list parsing isn't that happy with the results so
it requires some re-arranging such that the following two errors are
raised correctly:
1. Expected comma
2. Recovery context error
For (1), the following scenarios needs to be considered:
* Missing comma between two elements
* Half parsed element because the grammar doesn't allow it (for example,
named expressions)
For (2), the following scenarios needs to be considered:
1. If the parser is at a comma which means that there's a missing
element otherwise the comma would've been consumed by the first `eat`
call above. And, the parser doesn't take the re-lexing route on a comma
token.
2. If it's the first element and the current token is not a comma which
means that it's an invalid element.
resolves: #11640
## Test Plan
- [x] Update existing test snapshots and validate them
- [x] Add additional test cases specific to the re-lexing logic and
validate the snapshots
- [x] Run the fuzzer on 3000+ valid inputs
- [x] Run the fuzzer on invalid inputs
- [x] Run the parser on various open source projects
- [x] Make sure the ecosystem changes are none
How was this working for anyone else? The `prettier` path did not exist
on my machine. Also added `--force` to the push because otherwise you
can't re-run the script for a given Ruff commit.
## Summary
This PR updates the server capabilities to include the commands that
Ruff supports. This is similar to how there's a list of possible code
actions supported by the server.
I noticed this when I was trying to find whether Helix supported
workspace commands or not based on Jane's comment
(https://github.com/astral-sh/ruff/pull/11831#discussion_r1634984921)
and I found the `:lsp-workspace-command` in the editor but it didn't
show up anything in the picker.
So, I looked at the implementation in Helix
(9c479e6d2d/helix-term/src/commands/typed.rs (L1372-L1384))
which made me realize that Ruff doesn't provide this in its
capabilities. Currently, this does require `ruff` to be first in the
list of language servers in the user config but that should be resolved
by https://github.com/helix-editor/helix/pull/10176. So, the following
config should work:
```toml
[[language]]
name = "python"
# Ruff should come first until https://github.com/helix-editor/helix/pull/10176 is released
language-servers = ["ruff", "pyright"]
```
## Test Plan
1. Neovim's server capabilities output should include the supported
commands:
```
executeCommandProvider = {
commands = { "ruff.applyFormat", "ruff.applyAutofix", "ruff.applyOrganizeImports", "ruff.printDebugInformation" },
workDoneProgress = false
},
```
2. Helix should now display the commands to pick from when
`:lsp-workspace-command` is invoked:
<img width="832" alt="Screenshot 2024-06-13 at 08 47 14"
src="https://github.com/astral-sh/ruff/assets/67177269/09048ecd-c974-4e09-ab56-9482ff3d780b">
## Summary
This PR adds a new enum to determine the kind of terminator token i.e.,
is it actually terminates the list or is it used for error recovery.
This is important because the parser should take the error recovery
route in case the terminator token is used for better error recovery.
This will then try to re-lex the token if it's the case.
I haven't updated any reference to use this new enum as otherwise it'll
update the snapshots. I plan to do that in a follow-up PR so that it's
easier to reason about.
## Test plan
`cargo insta test`
## Summary
This PR separates the terminator token for f-string elements depending
on the context. A list of f-string element can occur either in a regular
f-string or a format spec of an f-string. The terminator token is
different depending on that context.
## Test Plan
`cargo insta test` and verify the updated snapshots.
## Summary
This PR re-uses the `ruff_python_trivia::is_python_whitespace` in the
lexer instead of defining its own. This was mainly to avoid circular
dependency which was resolved in #11261.
## Summary
Add Constraint nodes to flow graph, and narrow types based on that (only
`is None` and `is not None` narrowing supported for now, to prototype
the structure.)
Also add simplification of zero- and one-element unions and
intersections, and flattening of intersections.
There's a lot more normalization logic needed for unions and
intersections (as is obvious from the inferred type in the added
`narrow_none` test), but this will be non-trivial and I'd rather do it
in a separate PR.
Here's a flowchart diagram for the code in the added `narrow_none` test:
The top branch is for the `if` expression in the initial assignment to
`x`; that `Constraint` node would only affect the type of `flag`, which
we don't care about in this test.
The second branch is for the `if` statement, with `Constraint` node
affecting the type of `x`.
## Test Plan
Added tests.
## Summary
Fixes#11744.
We now show a distinct popup message when we fail to get a document
snapshot during command execution. This message more clearly
communicates the issue to the user, instead of a generic "ruff
encountered an error" message.
## Test Plan
Try running `Fix all auto-fixable problems` on an incompatible file (for
example: `settings.json`). You should see the following popup message:
<img width="456" alt="Screenshot 2024-06-11 at 11 47 16 AM"
src="https://github.com/astral-sh/ruff/assets/19577865/3a28e3d7-3896-4dd0-b117-f87300dd3b68">
## Summary
Closes#11715.
Introduces a new command, `ruff.printDebugInformation`. This will print
useful information about the status of the server to `stderr`.
Right now, the information shown by this command includes:
* The path to the server executable
* The version of the executable
* The text encoding being used
* The number of open documents and workspaces
* A list of registered configuration files
* The capabilities of the client
## Test Plan
First, checkout and use [the corresponding `ruff-vscode`
PR](https://github.com/astral-sh/ruff-vscode/pull/495).
Running the `Print debug information` command in VS Code should show
something like the following in the Output channel:
<img width="991" alt="Screenshot 2024-06-11 at 11 41 46 AM"
src="https://github.com/astral-sh/ruff/assets/19577865/ab93c009-bb7b-4291-b057-d44fdc6f9f86">
## Summary
Fixes#10968.
Fixes#11545.
The server's tracing system has been rewritten from the ground up. The
server now has trace level and log level settings which restrict the
tracing events and spans that get logged.
* A `logLevel` setting has been added, which lets a user set the log
level. By default, it is set to `"info"`.
* A `logFile` setting has also been added, which lets the user supply an
optional file to send tracing output (it does not have to exist as a
file yet). By default, if this is unset, tracing output will be sent to
`stderr`.
* A `$/setTrace` handler has also been added, and we also set the trace
level from the initialization options. For editors without direct
support for tracing, the environment variable `RUFF_TRACE` can override
the trace level.
* Small changes have been made to how we display tracing output. We no
longer use `tracing-tree`, and instead use
`tracing_subscriber::fmt::Layer` to format output. Thread names are now
included in traces, and I've made some adjustment to thread worker names
to be more useful.
## Test Plan
In VS Code, with `ruff.trace.server` set to its default value, no logs
from Ruff should appear.
After changing `ruff.trace.server` to either `messages` or `verbose`,
you should see log messages at `info` level or higher appear in Ruff's
output:
<img width="1005" alt="Screenshot 2024-06-10 at 10 35 04 AM"
src="https://github.com/astral-sh/ruff/assets/19577865/6050d107-9815-4bd2-96d0-e86f096a57f5">
In Helix, by default, no logs from Ruff should appear.
To set the trace level in Helix, you'll need to modify your language
configuration as follows:
```toml
[language-server.ruff]
command = "/Users/jane/astral/ruff/target/debug/ruff"
args = ["server", "--preview"]
environment = { "RUFF_TRACE" = "messages" }
```
After doing this, logs of `info` level or higher should be visible in
Helix:
<img width="1216" alt="Screenshot 2024-06-10 at 10 39 26 AM"
src="https://github.com/astral-sh/ruff/assets/19577865/8ff88692-d3f7-4fd1-941e-86fb338fcdcc">
You can use `:log-open` to quickly open the Helix log file.
In Neovim, by default, no logs from Ruff should appear.
To set the trace level in Neovim, you'll need to modify your
configuration as follows:
```lua
require('lspconfig').ruff.setup {
cmd = {"/path/to/debug/executable", "server", "--preview"},
cmd_env = { RUFF_TRACE = "messages" }
}
```
You should see logs appear in `:LspLog` that look like the following:
<img width="1490" alt="Screenshot 2024-06-11 at 11 24 01 AM"
src="https://github.com/astral-sh/ruff/assets/19577865/576cd5fa-03cf-477a-b879-b29a9a1200ff">
You can adjust `logLevel` and `logFile` in `settings`:
```lua
require('lspconfig').ruff.setup {
cmd = {"/path/to/debug/executable", "server", "--preview"},
cmd_env = { RUFF_TRACE = "messages" },
settings = {
logLevel = "debug",
logFile = "your/log/file/path/log.txt"
}
}
```
The `logLevel` and `logFile` can also be set in Helix like so:
```toml
[language-server.ruff.config.settings]
logLevel = "debug"
logFile = "your/log/file/path/log.txt"
```
Even if this log file does not exist, it should now be created and
written to after running the server:
<img width="1148" alt="Screenshot 2024-06-10 at 10 43 44 AM"
src="https://github.com/astral-sh/ruff/assets/19577865/ab533cf7-d5ac-4178-97f1-e56da17450dd">
## Summary
We recently updated our old formatting and linting setup in Streamlit to
use ruff: https://github.com/streamlit/streamlit/pull/8849
Thanks for this excellent tool :)
## Test Plan
This PR only contains changes to the Readme.
Micha Reiser
Dhruv Manilawala
psychedelicious
Jane Lewis
renovate[bot]
github-actions[bot]
Zanie Blue
Yair Peretz
Filip Czaplicki
Alex Waygood
Carl Meyer
Lukas Masuch
Charlie Marsh