## Summary
1. Discussed in review of #16678 that println should be replaced by
using `printer`. The `println` pattern was pretty consistent across all
the `dir` commands, so I've updated all of them in this PR (there are
some usages of `println` outside of `uv/src/commands` that I didn't
touch -- the use cases there seemed more complex and nuanced).
2. I missed two comments in the previous PR before merging, so updates
from those are in here as well.
## Test Plan
No behavior changes, existing tests for all commands pass.
---------
Signed-off-by: Mikayla Thompson <mrt@mikayla.codes>
Addresses https://github.com/astral-sh/uv/issues/13636
Prints the path to the workspace root by default, and any of the child
packages if requested.
I looped it into the same preview flag as `workspace metadata`, given
how closely related they are.
## Summary
```
─> uv workspace dir
/Users/mikayla/code/uv/dev-envs
─> uv workspace dir --package foo-proj
/Users/mikayla/code/uv/dev-envs/foo-proj
─> uv workspace dir --package bar-proj
error: Package `bar-proj` not found in workspace.
```
## Test Plan
Unit tests added.
---------
Signed-off-by: Mikayla Thompson <mrt@mikayla.codes>
Co-authored-by: Zanie Blue <contact@zanie.dev>
Resolves https://github.com/astral-sh/uv/issues/16427
This PR updates `uv version --bump` so you can pin the exact number
you’re targeting, i.e. `--bump patch=10` or `--bump dev=42`. The
command-line interface now parses those `component=value` flags, and the
bump logic actually sets the version to the number you asked for.
This adds the scaffolding for a `uv workspace metadata` command, as an
equivalent to `cargo metadata`, for integration with downstream tools. I
didn't do much here beyond emit the workspace root path and the paths of
the workspace members. I explored doing a bit more in #16638, but I
think we're actually going to want to come up with a fairly
comprehensive schema like `cargo metadata` has. I've started exploring
that too, but I don't have a concrete proposal to share yet.
I don't want this to be a top-level command because I think people would
expect `uv metadata <PACKAGE>` to show metadata about arbitrary packages
(this has been requested several times). I also think we can do other
things in the workspace namespace to make trivial integrations simpler,
like `uv workspace list` (enumerate members) and `uv workspace dir`
(show the path to the workspace root).
I don't expect this to be stable at all to start. I've both gated it
with preview and hidden it from the help. The intent is to merge so we
can iterate on it as we figure out what integrations need.
Addresses https://github.com/astral-sh/uv/issues/15790
## Summary
After discussion, the functionality of `--project` vs `--directory` was
quite unclear in this case, so deprecating `--project` for `init` is
probably the clearest behavior option. This is a breaking change, so it
requires being under preview before being rolled out fully.
Included in the PR now:
- new feature flag (`init --project` is deprecated if `--preview` or
`--preview-features deprecate-project-for-init` are provided)
- tests (for `--directory` behavior, as well as the current warning and
future error)
- documentation updated in docs/concepts/projects/init.md
---------
Signed-off-by: Mikayla Thompson <mrt@mikayla.codes>
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
Similarly to #16529 that adds `UV_NO_GROUP`, this adds
`UV_NO_DEFAULT_GROUPS` that does the same as `--no-default-groups`. This
can be useful on the CI, to disable default groups on a job without
having to set the argument in all commands that could trigger a sync
(for instance
[here](8757b318e9/.github/workflows/main.yml (L105-L116))).
## Test Plan
Snapshot tests.
---------
Co-authored-by: samypr100 <3933065+samypr100@users.noreply.github.com>
## Summary
At present, we only have support for the detail routes (e.g.,
`https://pypi.org/simple/requests`), but not the top-level index route
(e.g., `https://pypi.org/simple/`). I need this for some downstream work
so pulling it into its own PR.
## Summary
These are present on the PyTorch index, but only at very old versions.
The PyPI versions are newer, and seemingly these don't need to be built
against CUDA, etc.
Closes https://github.com/astral-sh/uv/issues/16651.
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [jiff](https://redirect.github.com/BurntSushi/jiff) |
workspace.dependencies | patch | `0.2.15` -> `0.2.16` |
---
### Release Notes
<details>
<summary>BurntSushi/jiff (jiff)</summary>
###
[`v0.2.16`](https://redirect.github.com/BurntSushi/jiff/blob/HEAD/CHANGELOG.md#0216-2025-11-07)
[Compare
Source](https://redirect.github.com/BurntSushi/jiff/compare/0.2.15...0.2.16)
\===================
This release contains a number of enhancements and bug fixes that have
accrued
over the last few months. Most are small polishes. A couple of the bug
fixes
apply to panics that could occur when parsing invalid `TZ` strings or
invalid
`strptime` format strings.
Also, parsing into a `Span` should now be much faster (for both the ISO
8601
and "friendly" duration formats).
Enhancements:
- [#​298](https://redirect.github.com/BurntSushi/jiff/issues/298):
Add Serde helpers for (de)serializing `std::time::Duration` values.
- [#​396](https://redirect.github.com/BurntSushi/jiff/issues/396):
Add `Sub` and `Add` trait implementations for `Zoned` (in addition to
the
already existing trait implementations for `&Zoned`).
- [#​397](https://redirect.github.com/BurntSushi/jiff/pull/397):
Add `BrokenDownTime::set_meridiem` and ensure it overrides the hour when
formatting.
- [#​409](https://redirect.github.com/BurntSushi/jiff/pull/409):
Switch dependency on `serde` to `serde_core`. This should help speed up
compilation times in some cases.
- [#​430](https://redirect.github.com/BurntSushi/jiff/pull/430):
Add new `Zoned::series` API, making it consistent with the same API on
other
datetime types.
- [#​432](https://redirect.github.com/BurntSushi/jiff/pull/432):
When `lenient` mode is enabled for `strftime`, Jiff will no longer error
when
the formatting string contains invalid UTF-8.
- [#​432](https://redirect.github.com/BurntSushi/jiff/pull/432):
Formatting of `%y` and `%g` no longer fails based on the specific year
value.
- [#​432](https://redirect.github.com/BurntSushi/jiff/pull/432):
Parsing of `%s` is now a bit more consistent with other fields.
Moreover,
`BrokenDownTime::{to_timestamp,to_zoned}` will now prefer timestamps
parsed
with `%s` over any other fields that have been parsed.
- [#​433](https://redirect.github.com/BurntSushi/jiff/pull/433):
Allow parsing just a `%s` into a `Zoned` via the `Etc/Unknown` time
zone.
Bug fixes:
- [#​386](https://redirect.github.com/BurntSushi/jiff/issues/386):
Fix a bug where `2087-12-31T23:00:00Z` in the `Africa/Casablanca` time
zone
could not be round-tripped (because its offset was calculated
incorrectly as
a result of not handling "permanent DST" POSIX time zones).
- [#​407](https://redirect.github.com/BurntSushi/jiff/issues/407):
Fix a panic that occurred when parsing an empty string as a POSIX time
zone.
- [#​410](https://redirect.github.com/BurntSushi/jiff/issues/410):
Fix a panic that could occur when parsing `%:` via `strptime` APIs.
- [#​414](https://redirect.github.com/BurntSushi/jiff/pull/414):
Update some parts of the documentation to indicate that
`TimeZone::unknown()`
is a fallback for `TimeZone::system()` (instead of the `jiff 0.1`
behavior of
using `TimeZone::UTC`).
- [#​423](https://redirect.github.com/BurntSushi/jiff/issues/423):
Fix a panicking bug when reading malformed TZif data.
- [#​426](https://redirect.github.com/BurntSushi/jiff/issues/426):
Fix a panicking bug when parsing century (`%C`) via `strptime`.
- [#​445](https://redirect.github.com/BurntSushi/jiff/pull/445):
Fixed bugs with parsing durations like `-9223372036854775808s`
and `-PT9223372036854775808S`.
Performance:
- [#​445](https://redirect.github.com/BurntSushi/jiff/pull/445):
Parsing into `Span` or `SignedDuration` is now a fair bit faster in some
cases.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "before 4am on Monday" (UTC),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR was generated by [Mend Renovate](https://mend.io/renovate/).
View the [repository job
log](https://developer.mend.io/github/astral-sh/uv).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0MS4xNTkuNCIsInVwZGF0ZWRJblZlciI6IjQxLjE1OS40IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6WyJpbnRlcm5hbCJdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Resolves https://github.com/astral-sh/uv/issues/16295
This PR updates the Conda base-environment heuristic to recognize
Pixi-managed environments by checking for the `conda-meta/pixi` marker
file. Pixi default environments now resolve as isolated child
environments instead of system installations, restoring the expected uv
pip behavior without the `--system` flag.
`.rsrc` is the idiomatic way of storing metadata and non-code resources
in PE
binaries. This should make the resulting binaries more robust as they
are no longer
dependent on the exact location of a certain magic number.
Addresses: #15022
## Test Plan
Existing integration test for `uv-trampoline-builder` + addition to
ensure robustness
to code signing.
---------
Co-authored-by: samypr100 <3933065+samypr100@users.noreply.github.com>
Co-authored-by: Zanie Blue <contact@zanie.dev>
This is failing with
```
Run python3 scripts/check_system_python.py --uv ./uv
INFO: Checking that `pylint` isn't installed.
WARNING: Package(s) not found: pylint
INFO: Installing the package `pylint`.
DEBUG uv 0.9.7 (2cd1400fb 2025-11-06)
DEBUG Acquired shared lock for `/Users/runner/.cache/uv`
DEBUG Searching for default Python interpreter in search path or managed installations
DEBUG Found `cpython-3.14.0-macos-x86_64-none` at `/usr/local/bin/python3` (first executable in the search path)
Using Python 3.14.0 environment at: /usr/local/opt/python@3.14/Frameworks/Python.framework/Versions/3.14
DEBUG Released lock at `/Users/runner/.cache/uv/.lock`
error: The interpreter at /usr/local/opt/python@3.14/Frameworks/Python.framework/Versions/3.14 is externally managed, and indicates the following:
To install Python packages system-wide, try brew install
xyz, where xyz is the package you are trying to
install.
If you wish to install a Python library that isn't in Homebrew,
use a virtual environment:
python3 -m venv path/to/venv
source path/to/venv/bin/activate
python3 -m pip install xyz
If you wish to install a Python application that isn't in Homebrew,
it may be easiest to use 'pipx install xyz', which will manage a
virtual environment for you. You can install pipx with
brew install pipx
You may restore the old behavior of pip by passing
the '--break-system-packages' flag to pip, or by adding
'break-system-packages = true' to your pip.conf file. The latter
will permanently disable this error.
If you disable this error, we STRONGLY recommend that you additionally
pass the '--user' flag to pip, or set 'user = true' in your pip.conf
file. Failure to do this can result in a broken Homebrew installation.
Read more about this behavior here: <https://peps.python.org/pep-0668/>
```
## Summary
Now that we perform this fast-path in
`crates/uv-distribution/src/source/mod.rs`, I _think_ the fast-path here
is no longer used? In my testing, we only actually took this path when
the fast-path _already_ failed (and thus it would fail again, wasting
time).
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
Fixed a typo in the docs.
Regenerated the docs, with the fix.
<!-- What's the purpose of the change? What does it do, and why? -->
## Summary
Fix incomplete value_type attribute for default-groups field in the
ToolUv struct schema definition. The value_type was missing its value,
which should be str | list[str] to reflect that default-groups can
accept either the literal "all" or a list of group names. (#16574)
Resolves https://github.com/astral-sh/uv/issues/16433
When `uv init` infers a project name from the working directory,
directories with characters outside the PEP 503 rules produced the
generic “Not a valid package or extra name” message that didn’t explain
the source of the problem. This change intercepts that failure, reports
whether the current or explicit target directory caused it, and tells
the user to supply an explicit `--name`.
