## Summary
In general, it's not quite right to filter preferences by `--reinstall`
-- we still want to respect existing versions, we just don't want to
respect _installed_ versions. But now that the installed versions and
preferences are decoupled, we can remove this (`--reinstall` is enforced
on the installed versions via the `Exclusions` struct that we pass to
the resolver).
While I was here, I also cleaned up the lockfile preference code to
better match the structure for `requirements.txt`.
## Summary
I believe that this is not necessary, as the installer packages are
already considered in `CandidateSelector::get_preferred`.
Firstly, note that we never pass both non-empty installed packages _and_
non-empty preferences (the installer routines pass site packages and no
preferences; the resolver routines pass no site packages but lockfile
preferences).
However, in general, if you look at `CandidateSelector::get_preferred`,
and consider what's changing, we now skip the `if let Some(version) =
preferences.version(package_name)` case for installed packages. But we
then check installed packages within that `if`, and in the `else`. So it
seems like we'll still return them in either case?
The only behavior change is in the case that you have multiple versions
of a package installed. Previously, we'd respect one of them, because
`Preferences` takes the last winner (it's a hash map, so we just replace
the package key with the last version we see); but in installed
packages, we always ignore distributions with multiple versions, since
it's indicative of a broken environment. That's a fine change IMO. We
could change `CandidateSelector::get_preferred` to support this if we
wanted to.
## Summary
We currently rely on libgit2 for most git-related functionality.
However, libgit2 has long-standing performance issues, as well as lags
significantly behind git in terms of new features. For these reasons we
now use the git CLI by default for fetching repositories
(https://github.com/astral-sh/uv/pull/1781). This PR completely drops
libgit2 in favor of the git CLI for all git-related functionality, which
should allow us to use features such as partial clones and sparse
checkouts in the future for performance.
There is also a lot of technical debt in the current git code as it's
mostly taken from Cargo. Switching to the git CLI *vastly* simplifies
the `uv-git` codebase.
Eventually we might want to look into switching to
[`gitoxide`](https://github.com/Byron/gitoxide), but it's currently too
immature for our use case.
## Summary
This PR changes the lock-file format to use inline tables for wheels and
source distributions, which currently use separate tables that make the
file harder to follow.
```diff
[[distribution]]
name = "typing-extensions"
version = "4.10.0"
source = "registry+https://pypi.org/simple"
- [distribution.sdist]
- url = "0d26ce356c7c323176620b7b483e44/typing_extensions-4.10.0.tar.gz"
- hash = "sha256:b0abd7c89e8fb96f98db18d86106ff1d90ab692004eb746cf6eda2682f91b3cb"
- size = 77558
-
- [[distribution.wheel]]
- url = "dc04a3ea60b9bc8074b5d6b7ab90bb/typing_extensions-4.10.0-py3-none-any.whl"
- hash = "sha256:69b1a937c3a517342112fb4c6df7e72fc39a38e7891a5730ed4985b5214b5475"
- size = 33926
+ sdist = { url = "0d26ce356c7c323176620b7b483e44/typing_extensions-4.10.0.tar.gz", hash = "sha256:b0abd7c89e8fb96f98db18d86106ff1d90ab692004eb746cf6eda2682f91b3cb", size = 77558 }
+ wheel = [{ url = "dc04a3ea60b9bc8074b5d6b7ab90bb/typing_extensions-4.10.0-py3-none-any.whl", hash = "sha256:69b1a937c3a517342112fb4c6df7e72fc39a38e7891a5730ed4985b5214b5475", size = 33926 }]
```
The downside is that the inline-tables end up quite long and TOML
doesn't support line breaks in inline tables, yet.
Part of https://github.com/astral-sh/uv/issues/3611.
We significantly regressed performance in some cases because we were
cloning the resolver state one more time than we needed to. That doesn't
sound like a lot, but in the case where there are no forks, it implies
we were cloning the state for every `get_dependencies` called when we
shouldn't have been cloning it at all.
Avoiding the clone results in somewhat tortured code. This can probably
be refactored by moving bits out to a helper routine, but that also
seemed non-trivial. So we let this suffice for now.
This addresses the lack of marker support in prior commits.
Specifically, we add them as a new field to `AnnotatedDist`, and from
there, they get added to a `Distribution` in a `Lock`.
This commit is a pretty invasive change that implements the merging
of resolutions created by each fork of the resolver.
The main idea here is that each `SolveState` is converted into a
`Resolution` (a new type) and stored on the heap after its fork
completes. When all forks complete, they are all merged into a single
`Resolution`. This `Resolution` is then used to build a `ResolutionGraph`.
Construction of `ResolutionGraph` mostly stays the same (despite the
gnarly diff due to an indent change) with one exception: the code to
extract dependency edges out of PubGrub's state has been moved to
`SolveState::into_resolution`. The idea here is that once a fork
completes, we extract what we need from the PubGrub state and then
throw it away. We store these edges in our own intermediate type which
is then converted into petgraph edges in the `ResolutionGraph`
constructor.
One interesting change we make here is that our edge
data is now a `Version` instead of a `Range<Version>`. I don't think
`Range<Version>` was actually being used anywhere, so this seems okay?
In any case, I think `Version` here is correct because a resolution
corresponds to specific dependencies of each package. Moreover, I didn't
see an easy way to make things work with `Range<Version>`. Notably,
since we no longer have the guarantee that there is only one version of
each package, we need to use `(PackageName, Version)` instead of just
`PackageName` for inverted lookups in `ResolutionGraph::from_state`.
Finally, the main resolver loop itself is changed a bit to track all
forked resolutions and then merge them at the end.
Note that we don't really have any dealings with markers in this commit.
We'll get to that in a subsequent commit.
This changes the constructor to just take an `InMemoryIndex`
directly instead of the constituent parts. No real reason other
than it seems a little simpler.
There are still some TODOs/FIXMEs here, but this makes represents a
chunk of the resolver refactoring to enable forking. We don't do any
merging of resolutions yet, so crucially, this code is broken when no
marker environment is provided. But when a marker environment is
provided, this should behave the same as a non-forking resolver. In
particular, `get_dependencies_forking` is just `get_dependencies`
whenever there's a marker environment.
This makes it so we can pass any function to determine whether an extra
is always true or not.
For example, `markers.simplify_extras_with(|_| true)` will remove all
extras in any marker expression. This wasn't possible to express
(without knowing all of the marker names) using the old API, but becomes
trivial to express with a predicate function.
While this could be done by callers since the representation
of `MarkerTree` is public, they are just annoying enough to do
that I think it makes sense to provide them on `MarkerTree`
itself.
These could also be improved in the future to do even more
flattening of conjunctions/disjunctions (or perhaps even
more robust simplification). But for now, some basic flattening
is good enough.
These routines will be used to combine marker expressions when
merging forked resolutions.
## Summary
Ensures that we avoid upgrading packages unless `--upgrade` or similar
is passed.
For now, the resolver only respects these for registry distributions.
Closes https://github.com/astral-sh/uv/issues/3918.
## Summary
This PR adds extras to the lockfile, and enables users to selectively
sync extras in `uv sync` and `uv run`. The end result here was fairly
simple, though it required a few refactors to get here. The basic idea
is that `DistributionId` now includes `extra: Option<ExtraName>`, so we
effectively treat extras as separate packages. Generating the lockfile,
and generating the resolution from the lockfile, fall out of this
naturally with no special-casing or additional changes.
The main downside here is that it bloats the lockfile significantly.
Specifically:
- We include _all_ distribution URLs and hashes for _every_ extra
variant.
- We include all dependencies for the extra variant, even though that
are dependencies of the base package.
We could normalize this representation by changing each distribution
have an `optional-dependencies` hash map that keys on extras, but we
actually don't have the information we need to create that right now
(specifically, we can't differentiate between dependencies that
_require_ the extra and dependencies on the base package).
Closes#3700.
## Summary
This PR just ensures that when running `uv lock` (or `uv run`), we lock
with all extras. When we later install, we'll also _install_ with all
extras, but that will be changed in a future PR.
## Summary
Today, we represent each package as a single node in the graph, and
combine all the extras. This is helpful for the `requirements.txt`-style
resolution, in which we want to show each a single line for each package
with the extras combined into a single array.
This PR modifies the representation to instead use a separate node for
each (package, extra) pair. We then reduce into the previous format when
printing in the `requirements.txt`-style format, so there shouldn't be
any user-facing changes here.
## Summary
This PR addresses an issue where `tool.uv` settings are not read if
`tool.uv.sources` or `tool.uv.workspaces` are present in the TOML file.
## Test Plan
Tested locally.
## Summary
Modifies `uv run` to write and read from the lockfile, rather than
resolving the project requirements as-is on each invocation.
Closes https://github.com/astral-sh/uv/issues/3891.
## Summary
Resolves https://github.com/astral-sh/uv/issues/3896. Adding progress
bars to the `MultiProgress` after configuring them seems to not
synchronize the required state fully.
## Test Plan
The repeated output is gone when testing locally.
## Summary
There are a few behavior changes in here:
- We now enforce `--require-hashes` for editables, like pip. So if you
use `--require-hashes` with an editable requirement, we'll reject it. I
could change this if it seems off.
- We now treat source tree requirements, editable or not (e.g., both `-e
./black` and `./black`) as if `--refresh` is always enabled. This
doesn't mean that we _always_ rebuild them; but if you pass
`--reinstall`, then yes, we always rebuild them. I think this is an
improvement and is close to how editables work today.
Closes#3844.
Closes#2695.
## Summary
<!-- What's the purpose of the change? What does it do, and why? -->
It removes the unused result when creating the Cache with the
`from_path` constructor. I don't believe it does any io operations any
more at least.
Add workspace support when using `-r <path>/pyproject.toml` or `-e
<path>` in the pip interface. It is limited to all-editable
static-metadata workspaces, and tests only include a single main
workspace, ignoring path dependencies in another workspace. This can be
considered the MVP for workspace support: You can create a workspace,
you can install from it, but some options and conveniences are still
missing. I'll file follow-up tickets (support in lockfiles, support path
deps in other workspace, #3625)
There is also support in `uv run`, but we need
https://github.com/astral-sh/uv/issues/3700 first to properly support
using different current projects in the bluejay interface, currently the
resolution and therefore the lockfile depends on the current project.
I'd do this change first (it's big enough already), then #3700, and then
add workspace support properly to bluejay.
Fixes#3404
This bumps the versions of pep580 and pep440 to coincide with the
crates.io versions. While not strictly the same, the new types in uv us
an `Inner` struct. Practically I've found I'm still able to use the
patched versions, as can seen from the open PR here:
https://github.com/prefix-dev/pixi/pull/1436.
Would be great if this bump can be done so we can keep combining the
types :)
Follow-up to https://github.com/astral-sh/uv/pull/3797 to clean up the
test isolation in `uv-interpreter`.
I still want to expose a CLI at some point like `uv python <...>` for
discovery and test from there, hopefully this will make that transition
simpler.
Extends #3726
Moves toolchain storage out of `UV_BOOTSTRAP_DIR` (`./bin`) into the
proper user data directory as defined by #3726.
Replaces `UV_BOOTSTRAP_DIR` with `UV_TOOLCHAIN_DIR` for customization.
Installed toolchains will be discovered without opt-in, but the idea is
still that these are not yet user-facing.
## Summary
This also adds filtering for the ARM Pythons, since that needs some libc
changes; and it closes https://github.com/astral-sh/uv/issues/3854 by
way of adding an "arm" branch.
Charlie Marsh
Ibraheem Ahmed
Andrew Gallant
konsti
Ahmed Ilyas
Tim de Jager
Tim de Jager
Zanie Blue
renovate[bot]