## Summary
This is a smaller alternative to #10794. If the `Requires-Dist` that we
extract statically doesn't match the lockfile metadata, we now go back
to the distribution database to double-check. Checking the
`Requires-Dist` is itself very cheap, so in the worst case, we're just
paying the same cost as prior to this optimization.
Closes https://github.com/astral-sh/uv/issues/10776.
## Summary
When resolving Git metadata, we may be able to fetch the metadata from
GitHub directly in some cases. This is _way_ faster, since we don't need
to perform many Git operations and, in particular, don't need to clone
the repo.
This only works in the following cases:
- The Git repository is public. Otherwise, I believe you need an access
token, which we don't have.
- The `pyproject.toml` has static metadata.
- The `pyproject.toml` has no `tool.uv.sources`. Otherwise, we need to
lower them... And, if there are any paths or workspace sources, that
requires an install path (i.e., we need the content on-disk).
- The project is in the repo root. If it's in a subdirectory, it could
be a workspace member. And if it's a workspace member, there could be
sources defined in the workspace root. But we can't know without
fetching the workspace root -- and we need the workspace in order to
find the root...
Closes#10568.
## Summary
These are very similar to (and computed in the same way as) the hints we
should during a failed resolution, but for install-time.
Closes#10635.
## Test Plan
As an example, when installing PyTorch on macOS with Python 3.13 (wheels
exist for Linux):
```
error: Distribution `torch==2.5.1 @ registry+https://pypi.org/simple` can't be installed because it doesn't have a source distribution or wheel for the current platform
hint: You're on macOS (`macosx_14_0_arm64`), but `torch` (v2.5.1) only has wheels for the following platform: `manylinux1_x86_64`
```
See https://github.com/astral-sh/uv/issues/4204 for motivation
This doesn't really reach the user experience I'd expect — i.e., we end
up saying a virtual environment "does not exist" which is a little
silly. However, I think improving the error messaging on interpreter
queries in general should be solved separately. I did one small
"general" change in
89e11d0222
— otherwise we don't show the message at all.
---------
Co-authored-by: konsti <konstin@mailbox.org>
## Summary
The fix I shipped in https://github.com/astral-sh/uv/pull/10690
regressed an important case. If we solve a PyPI branch before a PyTorch
branch, we'll end up respecting the preference, and choosing `2.2.2`
instead of `2.2.2+cpu`.
This PR goes back to ignoring preferences that don't map to the current
index. However, to solve https://github.com/astral-sh/uv/issues/10383,
we need to special-case `requirements.txt`, which can't provide explicit
indexes. So, if a preference comes from `requirements.txt`, we still
respect it.
Closes https://github.com/astral-sh/uv/issues/10772.
## Summary
For example, `cargo run python install
cpython-3.12.8-linux-x86_64_v3-gnu` (on macOS) shouldn't attempt to
patch the dylib. At present, it leads to this warning:
```
warning: Failed to patch the install name of the dynamic library for /Users/crmarsh/.local/share/uv/python/cpython-3.12.8-linux-x86_64_v3-gnu/bin/python3.12. This may cause issues when building Python native extensions.
Underlying error: Failed to update the install name of the Python dynamic library located at `/Users/crmarsh/.local/share/uv/python/cpython-3.12.8-linux-x86_64_v3-gnu/lib/libpython3.12.dylib`
```
## Summary
We now respect environment variable-based authentication when the
explicit index is defined outside of the workspace root. This applies to
both local and Git-based projects.
Closes https://github.com/astral-sh/uv/issues/10680.
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
<!-- What's the purpose of the change? What does it do, and why? -->
The new ARM runners report a permission error:
```
Run uvx twine check wheelhouse/*
error: failed to open file `/home/runneradmin/.config/uv/uv.toml`: Permission denied (os error 13)
```
In this PR, a PermissionsError is treated like not finding the file.
I reworked the structure just a bit to avoid calling `err.kind()`
multiple times.
## Test Plan
<!-- How was it tested? -->
Added a UNIX only test where I set the permissions of the folder
containing the file and try to find it.
---------
Signed-off-by: Henry Schreiner <henryschreineriii@gmail.com>
## Summary
This has a few effects:
1. We only call `preferences` once, which should be more efficient.
2. We collect `preferences` into a vector when there are multiple. Less
efficient, but pretty rare?
3. We now correctly prefer preferences from the same index.
## Summary
A bug in `requires_python` (which infers the Python requirement from a
marker) was leading us to break an invariant around the relationship
between the marker environment and the Python requirement. This, in
turn, was leading us to drop parts of the environment space when
solving.
Specifically, in the linked example, we generated a fork for
`python_full_version < '3.10' or platform_python_implementation !=
'CPython'`, which was later split into `python_full_version == '3.8.*'`
and `python_full_version == '3.9.*'`, losing the
`platform_python_implementation != 'CPython'` portion.
Closes https://github.com/astral-sh/uv/issues/10669.
## Summary
We can retain the small-size advantage of our new tags by moving the
"unknown tag" case into `WheelTagLarge`. This ensures that we can still
represent unknown tags, but avoid paying the cost for them.
Log the file that failed to bytecode compile when encountering a timeout
for debugging #6105 better.
[sysinfo](https://lib.rs/crates/sysinfo) would give us the option to
report memory usage too, but i'm hesitant to add a dependency just for
the error path.
These were introduced in https://github.com/astral-sh/uv/pull/587 but
are now showing up in our slow test list (#878) and we previously pared
down the `poetry_editable` test case dependencies — I think these were
just missed.
## Summary
I'm inferring that these are like... the older tag format? See, e.g.:
```
soxbindings-0.0.1-pp27-pypy_73-macosx_10_9_x86_64.whl
soxbindings-0.0.1-pp27-pypy_73-manylinux2010_x86_64.whl
soxbindings-0.0.1-pp36-pypy36_pp73-macosx_10_9_x86_64.whl
soxbindings-0.0.1-pp36-pypy36_pp73-manylinux2010_x86_64.whl
```
## Summary
Fixes#10598
## Test Plan
Looking for input here @zanieb. How/where would you include tests for
this?
More broadly: do we want a failure to perform the rename to be a hard
error? Or should it start out as a warning?
---------
Co-authored-by: Zanie Blue <contact@zanie.dev>
## Summary
This log message is shown every time a script including a uv
shebang is run. After installing all dependencies, printing this log
message every time does not add any relevant information for the user. I
would say it could even be misleading and motivate the user to debug his
own program searching for this log message.
As a consequence, reduce the log level of this message to debug.
## Test Plan
uv run was called with default settings and the log message didn't show
up.
cargo test was run and I tried to fix the issues.
## Summary
This PR modifies the lockfile to omit versions for source trees that use
`dynamic` versioning, thereby enabling projects to use dynamic
versioning with `uv.lock`.
Prior to this change, dynamic versioning was largely incompatible with
locking, especially for popular tools like `setuptools_scm` -- in that
case, every commit bumps the version, so every commit invalidates the
committed lockfile.
Closes https://github.com/astral-sh/uv/issues/7533.
## Summary
I previously made this required, but we now need to be able to create
these from a lockfile that _omits_ versions for dynamic source trees.
They should still be present in most cases, but it's best-effort.
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
I use `uv` for automation on remote hosts and it would be useful to have
it be able to tell me the supported versions of python (for the remote
machine) in a machine readable manner so I do not need to parse `uv
python list`.
This change adds `--format (json|text)` to `uv python list` to make it's
output machine readable
Loosely related:
- https://github.com/astral-sh/uv/issues/411
## Test Plan
Manually tested via
```
# quick inspection without pretty print
cargo run -- python list --format json
```
### Short example of output (trimmed down)
Cmd: `cargo run -- python list --format json | jq '.[:2]'`
```json
[
{
"key": "cpython-3.13.1+freethreaded-linux-x86_64-gnu",
"version": "3.13.1",
"version_parts": {
"major": 3,
"minor": 13,
"patch": 1
},
"path": null,
"symlink": null,
"url": "https://github.com/astral-sh/python-build-standalone/releases/download/20241219/cpython-3.13.1%2B20241219-x86_64-unknown-linux-gnu-freethreaded%2Bpgo%2Blto-full.tar.zst",
"os": "linux",
"variant": "freethreaded",
"implementation": "cpython",
"arch": "x86_64",
"libc": "gnu"
},
{
"key": "cpython-3.13.1-linux-x86_64-gnu",
"version": "3.13.1",
"version_parts": {
"major": 3,
"minor": 13,
"patch": 1
},
"path": "/usr/bin/python3.13",
"symlink": null,
"url": null,
"os": "linux",
"variant": "default",
"implementation": "cpython",
"arch": "x86_64",
"libc": "gnu"
}
]
```
---------
Co-authored-by: John Zlotek <jzlotek@gmail.com>
## Summary
I don't think this had an impact in practice, but it is "wrong" to omit
these. Confirmed that the cache (for example) now includes the build tag
(as in, `mkl_fft-1.3.8-72-cp310-cp310-manylinux2014_x86_64`).
## Summary
* Closes https://github.com/astral-sh/uv/pull/10515
* Bumps Rust Nightly to 1.85 Beta
* Removes old dev dependencies
## Test Plan
Existing tests.
Note, binaries need to be rebuilt for integrity before merging.
---------
Co-authored-by: Zanie Blue <contact@zanie.dev>
## Summary
After we resolve, we filter out any wheels that aren't applicable for
the target platforms. So, e.g., we remove macOS wheels if we find that
the user only asked to solve for Windows.
This PR extends the same logic to architectures, so that we filter out
ARM-only wheels when the user is only solving for x86, etc.
Closes#10571.
## Summary
This PR extends the thinking in #10525 to platform tags, and then uses
the structured tag enums everywhere, rather than passing around strings.
I think this is a big improvement! It means we're no longer doing ad hoc
tag parsing all over the place.
## Summary
The idea here is to show both (1) an example of a compatible tag and (2)
the tags that were available, whenever we fail to resolve due to an
abscence of matching wheels.
Closes https://github.com/astral-sh/uv/issues/2777.
## Summary
I need to be able to do non-lexicographic comparisons between tags
(e.g., so I can sort `cp313` as greater than `cp39`). It ended up being
easiest to just create structured types for all the tags we support,
with `FromStr` and `Display` implementations.
We don't currently store these in `Tags` or in `WheelFilename`. We may
want to, since they're really small (and `Copy`), but I need to
benchmark to determine whether parsing these in `WheelFilename` is
prohibitively slow.
## Summary
Resolves#5952
Add a `--path` option to `uv pip freeze` to be compatible with `pip
freeze`
## Test Plan
New snapshot tests
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
## Summary
Closes#3312.
This PR adds Git LFS support to the `uv-git` crate by using the
`git-lfs` CLI to fetch required LFS objects for a revision following the
call to `git fetch`.
The LFS fetch step is disabled by default and only enabled if the
environment variable `UV_GIT_LFS` is set.
When enabled, the LFS fetch step is run for all repositories regardless
of whether they have associated LFS objects. The step is skipped if the
`git-lfs` CLI tool isn't installed.
## Test Plan
I verified that the minimal example in the linked issue passes, i.e.
this command now succeeds:
```sh
UV_GIT_LFS=1 uv pip install git+https://github.com/grebnetiew/lfs-py.git
```
I also verified that non-LFS repositories still work, with or without
`git-lfs` installed.
### To Replicate
Attempt to use uv to install a Git dependency that contains LFS objects
(e.g. `uv pip install git+https://github.com/grebnetiew/lfs-py.git`).
This should fail with a smudge filter error.
Re-run the same command with the added environment variable
`UV_GIT_LFS=1`. The install should now succeed.
## Potential Changes / Improvements
~With this change LFS objects in a given revision will always be
downloaded if the user has Git LFS installed, which may not always be
desired behavior. It might be helpful to add a field to the `uv`
settings and/or an environment variable so that the LFS step can be
disabled if needed.~
Enabling/disabled via environment variable has now been implemented.
---------
Co-authored-by: Sydney Duckworth <sydduckworth@users.noreply.github.com>
Co-authored-by: Zanie Blue <contact@zanie.dev>
## Summary
Closes https://github.com/astral-sh/uv/issues/10522.
## Test Plan
```
❯ cargo run venv
warning: Failed to parse `pyproject.toml` during environment creation:
TOML parse error at line 1, column 1
|
1 | [project]
| ^^^^^^^^^
`pyproject.toml` is using the `[project]` table, but the required `project.version` field is neither set nor present in the `project.dynamic` list
Using CPython 3.13.0
Creating virtual environment at: .venv
Activate with: source .venv/bin/activate
```
## Summary
The assumption that all tags are listed under a flat `.git/ref/tags`
structure was wrong. Git creates a hierarchy of directories for tags
containing slashes. To fix the cache key calculation, we need to
recursively traverse all files under that folder instead.
## Test Plan
1. Create an `uv` project with git-tag cache-keys;
2. Add any tag with slash;
3. Run `uv sync` and see uv_cache_info error in verbose log;
4. `uv sync` doesn't trigger reinstall on next tag addition or removal;
5. With fix applied, reinstall triggers on every tag update and there
are no errors in the log.
Fixes#10467
---------
Co-authored-by: Sergei Nizovtsev <sergei.nizovtsev@eqvilent.com>
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
## Summary
Closes https://github.com/astral-sh/uv/issues/10493.
## Test Plan
Run `cargo test --profile fast-build --no-fail-fast -p uv
username_password_sources` from a terminal.
## Summary
If you have a dependency with a marker, and you add a constraint, it
causes us to _always_ fork, because we represent the constraint as a
second dependency with the marker repeated (and, therefore, we have two
requirements of the same name, both with markers). I don't think we
should fork here -- and in the end it's leading to this undesirable
resolution: #10481.
I tried to change constraints such that we just _reuse_ and augment the
initial requirement, but that has a fairly negative effect on error
messages: #10489. So this fix seems a bit better to me.
Closes https://github.com/astral-sh/uv/issues/10481.
## Summary
Fixes a bug when there are only comments in the dependencies section.
Basically, after one removes all dependencies, if there are remaining
comments then the value unwrapped here
c198e2233e/crates/uv-workspace/src/pyproject_mut.rs (L1309)
is never properly initialized.
It's initialized to `None`, here
c198e2233e/crates/uv-workspace/src/pyproject_mut.rs (L1256),
but doesn't get set to `Some(...)` until the first dependency here
c198e2233e/crates/uv-workspace/src/pyproject_mut.rs (L1276)
and since we remove them all... there are none.
## Test Plan
Manually induced bug with
```
[project]
name = "t1"
version = "0.1.0"
description = "Add your description here"
readme = "README.md"
requires-python = ">=3.11"
dependencies = [
"duct>=0.6.4",
"minilog>=2.3.1",
# comment
]
```
Then running
```
$ RUST_LOG=trace RUST_BACKTRACE=full uv remove duct minilog
DEBUG uv 0.5.8
DEBUG Found project root: `/home/bnorick/dev/workspace/t1`
DEBUG No workspace root found, using project root
thread 'main' panicked at crates/uv-workspace/src/pyproject_mut.rs:1294:73:
called `Option::unwrap()` on a `None` value
stack backtrace:
0: 0x5638d7bed6ba - <unknown>
1: 0x5638d783760b - <unknown>
2: 0x5638d7bae232 - <unknown>
3: 0x5638d7bf0f07 - <unknown>
4: 0x5638d7bf215c - <unknown>
5: 0x5638d7bf1972 - <unknown>
6: 0x5638d7bf1909 - <unknown>
7: 0x5638d7bf18f4 - <unknown>
8: 0x5638d75087d2 - <unknown>
9: 0x5638d750896b - <unknown>
10: 0x5638d7508d68 - <unknown>
11: 0x5638d8dcf1bb - <unknown>
12: 0x5638d76be271 - <unknown>
13: 0x5638d75ef1f9 - <unknown>
14: 0x5638d75fc3cd - <unknown>
15: 0x5638d772d9de - <unknown>
16: 0x5638d8476812 - <unknown>
17: 0x5638d83e1894 - <unknown>
18: 0x5638d84722d3 - <unknown>
19: 0x5638d83e1372 - <unknown>
20: 0x7f851cfc7d90 - <unknown>
21: 0x7f851cfc7e40 - __libc_start_main
22: 0x5638d758e992 - <unknown>
23: 0x0 - <unknown>
```
N.B. After fixing #10430, `ArcStr` became the fastest implementation
(and the gains were significantly reduced, down to 1-2%). See:
https://github.com/astral-sh/uv/pull/10453#issuecomment-2583344414.
## Summary
I tried out a variety of small string crates, but `Arc<str>`
outperformed them, giving a ~10% speed-up:
```console
❯ hyperfine "../arcstr lock" "../flexstr lock" "uv lock" "../arc lock" "../compact_str lock" --prepare "rm -f uv.lock" --min-runs 50 --warmup 20
Benchmark 1: ../arcstr lock
Time (mean ± σ): 304.6 ms ± 2.3 ms [User: 302.9 ms, System: 117.8 ms]
Range (min … max): 299.0 ms … 311.3 ms 50 runs
Benchmark 2: ../flexstr lock
Time (mean ± σ): 319.2 ms ± 1.7 ms [User: 317.7 ms, System: 118.2 ms]
Range (min … max): 316.8 ms … 323.3 ms 50 runs
Benchmark 3: uv lock
Time (mean ± σ): 330.6 ms ± 1.5 ms [User: 328.1 ms, System: 139.3 ms]
Range (min … max): 326.6 ms … 334.2 ms 50 runs
Benchmark 4: ../arc lock
Time (mean ± σ): 303.0 ms ± 1.2 ms [User: 301.6 ms, System: 118.4 ms]
Range (min … max): 300.3 ms … 305.3 ms 50 runs
Benchmark 5: ../compact_str lock
Time (mean ± σ): 320.4 ms ± 2.0 ms [User: 318.7 ms, System: 120.8 ms]
Range (min … max): 317.3 ms … 326.7 ms 50 runs
Summary
../arc lock ran
1.01 ± 0.01 times faster than ../arcstr lock
1.05 ± 0.01 times faster than ../flexstr lock
1.06 ± 0.01 times faster than ../compact_str lock
1.09 ± 0.01 times faster than uv lock
```
## Summary
We can read from the slice directly. I don't think this will affect
performance today, because `from_str` will then allocate, but it
_should_ be a speedup once #10475 merges, since we can then avoid
allocating a `String` and go straight from `str` to `ArcStr`.
#8061 incorrectly claims to change the delimiter for `UV_FIND_LINKS`
from spaces to commas. In reality, it prevents `UV_FIND_LINKS` from
being split. This commit fixes that.
## Summary
This appears to be a consistent 1% performance improvement and should
also reduce memory quite a bit. We've also decided to use these for
markers, so it's nice to use the same optimization here.
```
❯ hyperfine "./uv pip compile --universal scripts/requirements/airflow.in" "./arcstr pip compile --universal scripts/requirements/airflow.in" --min-runs 50 --warmup 20
Benchmark 1: ./uv pip compile --universal scripts/requirements/airflow.in
Time (mean ± σ): 136.3 ms ± 4.0 ms [User: 139.1 ms, System: 241.9 ms]
Range (min … max): 131.5 ms … 149.5 ms 50 runs
Benchmark 2: ./arcstr pip compile --universal scripts/requirements/airflow.in
Time (mean ± σ): 134.9 ms ± 3.2 ms [User: 137.6 ms, System: 239.0 ms]
Range (min … max): 130.1 ms … 151.8 ms 50 runs
Summary
./arcstr pip compile --universal scripts/requirements/airflow.in ran
1.01 ± 0.04 times faster than ./uv pip compile --universal scripts/requirements/airflow.in
```
It turns out that we use `UniversalMarker::pep508` quite a bit. To the
point that it makes sense to pre-compute it when constructing a
`UniversalMarker`.
This still isn't necessarily the fastest thing we can do, but this
results in a major speed-up and `without_extras` no longer shows up for
me in a profile.
Motivating benchmarks. First, from #10430:
```
$ hyperfine 'rm -f uv.lock && uv lock' 'rm -f uv.lock && uv-ag-optimize-without-extras lock'
Benchmark 1: rm -f uv.lock && uv lock
Time (mean ± σ): 408.3 ms ± 276.6 ms [User: 333.6 ms, System: 111.1 ms]
Range (min … max): 316.9 ms … 1195.3 ms 10 runs
Warning: The first benchmarking run for this command was significantly slower than the rest (1.195 s). This could be caused by (filesystem) caches that were not filled until after the first run. You should consider using the '--warmup' option to fill those caches before the actual benchmark. Alternatively, use the '--prepare' option to clear the caches before each timing run.
Benchmark 2: rm -f uv.lock && uv-ag-optimize-without-extras lock
Time (mean ± σ): 209.4 ms ± 2.2 ms [User: 209.8 ms, System: 103.8 ms]
Range (min … max): 206.1 ms … 213.4 ms 14 runs
Summary
rm -f uv.lock && uv-ag-optimize-without-extras lock ran
1.95 ± 1.32 times faster than rm -f uv.lock && uv lock
```
And now from #10438:
```
$ hyperfine 'uv pip compile requirements.in -c constraints.txt --universal --no-progress --python-version 3.8 --offline > /dev/null' 'uv-ag-optimize-without-extras pip compile requirements.in -c constraints.txt --universal --no-progress --python-version 3.8 --offline > /dev/null'
Benchmark 1: uv pip compile requirements.in -c constraints.txt --universal --no-progress --python-version 3.8 --offline > /dev/null
Time (mean ± σ): 12.718 s ± 0.052 s [User: 12.818 s, System: 0.140 s]
Range (min … max): 12.650 s … 12.815 s 10 runs
Benchmark 2: uv-ag-optimize-without-extras pip compile requirements.in -c constraints.txt --universal --no-progress --python-version 3.8 --offline > /dev/null
Time (mean ± σ): 419.5 ms ± 6.7 ms [User: 434.7 ms, System: 100.6 ms]
Range (min … max): 412.7 ms … 434.3 ms 10 runs
Summary
uv-ag-optimize-without-extras pip compile requirements.in -c constraints.txt --universal --no-progress --python-version 3.8 --offline > /dev/null ran
30.32 ± 0.50 times faster than uv pip compile requirements.in -c constraints.txt --universal --no-progress --python-version 3.8 --offline > /dev/null
```
Fixes#10430, Fixes#10438
## Summary
We shouldn't consider incompatible distributions (e.g., those that don't
match the required Python version) when determining the implied markers.
For some reason this was banned when originally added (I did not see
discussion about it). I think it's fine to allow. With `uv run`, there's
a bit of nuance because we also allow the script to be read from stdin.
## Summary
If a user provides a constraint like `flask==3.0.0`, that gets expanded
to `[3.0.0, 3.0.0+[max])`. So it's not a _singleton_, but it should be
treated as such for the purposes of prioritization, since in practice it
will almost always map to a single version.
This should be essentially the exact same behaviour, but backon is a
total API redesign, so things had to be expressed slightly differently.
Overall I think the code is more readable, which is nice.
Fixes#10001
## Summary
The issue here is that we add `urllib3{python_full_version >= '3.8'}` as
a dependency, then `requests{python_full_version >= '3.8'}`, which adds
`urllib3`, but at that point, we haven't expanded
`urllib3{python_full_version >= '3.8'}`, so we "lose" the singleton
constraint. The solution is to ensure that we visit proxies eagerly, so
that we accumulate constraints as early as possible.
Closes
https://github.com/astral-sh/uv/issues/10425#issuecomment-2580324578.
## Summary
You can now run `uv tree --script main.py` to show the dependency tree
for a given script. If a lockfile doesn't exist, it will create one.
Closes https://github.com/astral-sh/uv/issues/7328.
## Summary
`uv add --script main.py anyio` will now update the lockfile, _if_ it
already exists. (If no such lockfile exists, the behavior is unchanged.)
## Summary
This PR adds `ls` alias to `uv {tool, python, pip} list` for
convenience.
Not sure if folks previously discussed this or have any opinion on
having aliases – but I have a muscle memory for `ls` for listing things
in commands I'm using (like `docker images ls`, `zellij ls`, `helm ls`
etc.) and thought having `ls` alias for `list` command would be useful.
## Test Plan
I simply compiled `uv` and manually checked `./target/release/uv {tool,
python, pip} ls`.
## Summary
You can now run `uv lock --script main.py` to lock a given script
(though as of this PR, the script itself isn't used anywhere).
Closes https://github.com/astral-sh/uv/issues/6318.
The shellcheck action we uses misses some files, so they fell out of
spec for what we support. This PR first and foremost adds them to the
scanning list, and then fixes the issues found.
Fixes#7480
## Summary
This PR revives https://github.com/astral-sh/uv/pull/7827 to improve
tool resolutions such that, if the resolution fails, and the selected
interpreter doesn't match the required Python version from the solve, we
attempt to re-solve with a newly-discovered interpreter that _does_
match the required Python version.
For now, we attempt to choose a Python interpreter that's greater than
the inferred `requires-python`, but compatible with the same Python
minor. This helps avoid successive failures for cases like Posting,
where choosing Python 3.13 fails because it has a dependency that lacks
source distributions and doesn't publish any Python 3.13 wheels. We
should further improve the strategy to solve _that_ case too, but this
is at least the more conservative option...
In short, if you do `uv tool instal posting`, and we find Python 3.8 on
your machine, we'll detect that `requires-python: >=3.11`, then search
for the latest Python 3.11 interpreter and re-resolve.
Closes https://github.com/astral-sh/uv/issues/6381.
Closes https://github.com/astral-sh/uv/issues/10282.
## Test Plan
The following should succeed:
```
cargo run python uninstall --all
cargo run python install 3.8
cargo run tool install posting
```
In the logs, we see:
```
...
DEBUG No compatible version found for: posting
DEBUG Refining interpreter with: Python >=3.11, <3.12
DEBUG Searching for Python >=3.11, <3.12 in managed installations or search path
DEBUG Searching for managed installations at `/Users/crmarsh/.local/share/uv/python`
DEBUG Skipping incompatible managed installation `cpython-3.8.20-macos-aarch64-none`
DEBUG Found `cpython-3.13.1-macos-aarch64-none` at `/opt/homebrew/bin/python3` (search path)
DEBUG Skipping interpreter at `/opt/homebrew/opt/python@3.13/bin/python3.13` from search path: does not satisfy request `>=3.11, <3.12`
DEBUG Found `cpython-3.11.7-macos-aarch64-none` at `/opt/homebrew/bin/python3.11` (search path)
DEBUG Re-resolving with Python 3.11.7
DEBUG Using request timeout of 30s
DEBUG Solving with installed Python version: 3.11.7
DEBUG Solving with target Python version: >=3.11.7
DEBUG Adding direct dependency: posting*
DEBUG Searching for a compatible version of posting (*)
...
```
This test started failing on main.
I don't understand why this changed (there was a new release but exclude-newer is supposed to exclude those), but the error message improved.
PowerPC seems to build without errors if we upgrade `zlib-ng`, but
upgrading `zlib-ng` causes Windows to break
(https://github.com/rust-lang/libz-sys/issues/225), and Cargo doesn't
let us include two different versions.
s390x fails because it can't find `stfle`. It's possible that we could
fix this by by upgrading our manylinux version and/or by upgrading GCC
(which may necessitate upgrading our manylinux version), but I don't
know if it's fixable without one of those things? And it's not worth
bumping compatibility for that reason. \cc @konstin
This happened as a result of #10345 and #10362 being merged
independently. The latter used the old `Version::release` API, but the
former changed the `Version::release` API. This PR tweaks the new test
to use the new API (i.e., force a deref on the proxy type).
Basically, this explicitly checks that parsing a `1.2.0` into a
`Version` will roundtrip back to a `1.2.0`, and that parsing a `1.2`
will roundtrip back to a `1.2`.
I think this case is included in the other tests in this module, but
this test makes the behavior more clearly intentional I think.
Ref #10345
Ref https://github.com/astral-sh/uv/issues/10344
Not a performance optimization, but the function had become too large.
No logic changes, just code moving around. Looks slightly better when
ignoring whitespace changes.
It's still too complex but i haven't found an apt simplification.
## Summary
This allows, e.g., `uv remove flask[dotenv]` to remove `flask`. Like
`pip install` and `uv pip install`, the content after the package name
has no effect.
Closes https://github.com/astral-sh/uv/issues/9764.
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
https://docs.rs/serde_json/latest/serde_json/fn.from_reader.html
suggests that
> When reading from a source against which short reads are not
efficient, such as a
[File](https://doc.rust-lang.org/std/fs/struct.File.html), you will want
to apply your own buffering because serde_json will not buffer the
input. See
[std::io::BufReader](https://doc.rust-lang.org/std/io/struct.BufReader.html).
Without this buffering, we observe a sequence of single byte reads which
can be quite inefficient depending on the underlying filesystem.
This adds buffering with `std::io::BufReader` to resolve this.
<!-- What's the purpose of the change? What does it do, and why? -->
## Test Plan
Unit tests cover this code.
<!-- How was it tested? -->
Charlie Marsh
Zanie Blue
konsti
Henry Schreiner
Daniel Hollas
Mathieu Kniewallner
Luca Palmieri
Stefan Tatschner
github-actions[bot]
Taneli Hukkinen
Aria Desires
samypr100
Eric Mark Martin
Sydney Duckworth
Sergei Nizovtsev
renovate[bot]
bnorick
Jeremy Foxcroft
Andrew Gallant
Ahmed Ilyas
Burak Varlı
Kevin Marchais
Andrew Tulloch