mirror of
https://github.com/Druthulu/BFM-decomp
synced 2026-09-28 14:59:48 -04:00
feat(phase-26): §8 multi-jtbl --order carve + family-1 (func_801734BC ×134)
- ld_interleave.py --order: address-ordered N-piece data->rodata->data sandwich for overlays with 2+ matched jr-functions; legacy --front/--tail path is byte- untouched (main EXE + the 133 single-carve func_8012ACE0 siblings unaffected) - jtbl_carve.py rewritten additive/regenerate-from-config: parse the tail data region + existing .rodata carves, split the containing data piece for the new jtbl, re-emit the address-ordered pieces + the --order arg; same-subseg carve collision fails loud (-> jr isolation); idempotent - jtbl_family_bank.py: `make extract` BEFORE the carve (asm must match the reverted committed config; the old error-string retry was fragile) + revert-on-carve-fail - family-1: func_801734BC (34-ins PURE jr, ov_SC01_077_after) matched in ov077 (shared-tail switch idiom) + banked 133/133 siblings = x134 — CROSS-subseg multi-jtbl (func_8012ACE0 in _a + func_801734BC in _after) - R22 clean-fleet 136/136 byte-identical (~52s); 0 NON_MATCHING (G4)
This commit is contained in:
Drew T
+134
-134
File diff suppressed because it is too large
Load Diff
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x56a64, data, tail]
|
||||
- [0x7b1c4, .rodata, ov_SC01_000] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x7b290, data, tail2]
|
||||
- [0x7bdb4, .rodata, ov_SC01_000_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x7bdc8, data, tail3]
|
||||
- [0x7D78C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x7D78F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5b6b4, data, tail]
|
||||
- [0xc329c, .rodata, ov_SC01_001] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc3368, data, tail2]
|
||||
- [0xc3e8c, .rodata, ov_SC01_001_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc3ea0, data, tail3]
|
||||
- [0xCB06C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xCB06F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x57078, data, tail]
|
||||
- [0x6567c, .rodata, ov_SC01_004] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x65748, data, tail2]
|
||||
- [0x6626c, .rodata, ov_SC01_004_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x66280, data, tail3]
|
||||
- [0x68274, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x68277] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5a20c, data, tail]
|
||||
- [0xa2ddc, .rodata, ov_SC01_005] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa2ea8, data, tail2]
|
||||
- [0xa39cc, .rodata, ov_SC01_005_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa39e0, data, tail3]
|
||||
- [0xA5F08, bin, trailing] # final 1 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xA5F09] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5a20c, data, tail]
|
||||
- [0xa2ddc, .rodata, ov_SC01_006] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa2ea8, data, tail2]
|
||||
- [0xa39cc, .rodata, ov_SC01_006_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa39e0, data, tail3]
|
||||
- [0xA5F08, bin, trailing] # final 1 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xA5F09] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x575ec, data, tail]
|
||||
- [0x7888c, .rodata, ov_SC01_008] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x78958, data, tail2]
|
||||
- [0x7947c, .rodata, ov_SC01_008_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x79490, data, tail3]
|
||||
- [0x7B484, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x7B487] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5a7d4, data, tail]
|
||||
- [0xc8650, .rodata, ov_SC01_009] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc871c, data, tail2]
|
||||
- [0xc9240, .rodata, ov_SC01_009_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc9254, data, tail3]
|
||||
- [0xCB304, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xCB307] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x56454, data, tail]
|
||||
- [0x716e0, .rodata, ov_SC01_074] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x717ac, data, tail2]
|
||||
- [0x722d0, .rodata, ov_SC01_074_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x722e4, data, tail3]
|
||||
- [0x73C14, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x73C17] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -76,9 +76,11 @@ segments:
|
||||
# PoC: func_8012ACE0's single jtbl jtbl_801D8078 (8-aligned, 204B) = vram 0x801D8078..0x801D8144
|
||||
# = file 0xAFF20..0xAFFEC. func_8012ACE0 lives in the ov_SC01_077_a subseg. Other functions'
|
||||
# jtbls stay raw .data until matched (each matched fn's jtbl gets its own carve — the ×134 tool).
|
||||
- [0x5E978, data, tail] # globals + pre-carve jtbls (vram 0x80186AD0..0x801D8078)
|
||||
- [0xAFF20, .rodata, ov_SC01_077_a] # func_8012ACE0's jtbl_801D8078 -> migrate into ov_SC01_077_a.o
|
||||
- [0xAFFEC, data, tail2] # post-carve jtbls + tail (vram 0x801D8144..0x801DAB2C)
|
||||
- [0x5e978, data, tail]
|
||||
- [0xaff20, .rodata, ov_SC01_077_a] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xaffec, data, tail2]
|
||||
- [0xb0b10, .rodata, ov_SC01_077_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xb0b24, data, tail3]
|
||||
- [0xB29D4, bin, trailing] # final 3 bytes (EOF 0xB29D7 not word-aligned; spimdisasm drops
|
||||
# a trailing partial word and a <4-byte `data` carve emits nothing,
|
||||
# so use `bin` = raw .incbin, byte-exact). Word-aligned overlays omit this.
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5b3b4, data, tail]
|
||||
- [0x9b500, .rodata, ov_SC01_080] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9b5cc, data, tail2]
|
||||
- [0x9c0f0, .rodata, ov_SC01_080_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9c104, data, tail3]
|
||||
- [0x9FDF4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x9FDF7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5e6a8, data, tail]
|
||||
- [0x9ced0, .rodata, ov_SC01_084] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9cf9c, data, tail2]
|
||||
- [0x9dac0, .rodata, ov_SC01_084_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9dad4, data, tail3]
|
||||
- [0x9FA9C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x9FA9F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x62a58, data, tail]
|
||||
- [0xbd724, .rodata, ov_SC02_000] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xbd7f0, data, tail2]
|
||||
- [0xbe314, .rodata, ov_SC02_000_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xbe328, data, tail3]
|
||||
- [0xC070C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xC070F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x62a58, data, tail]
|
||||
- [0xbd724, .rodata, ov_SC02_003] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xbd7f0, data, tail2]
|
||||
- [0xbe314, .rodata, ov_SC02_003_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xbe328, data, tail3]
|
||||
- [0xC070C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xC070F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x55b38, data, tail]
|
||||
- [0x6bd34, .rodata, ov_SC02_004] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6be00, data, tail2]
|
||||
- [0x6c924, .rodata, ov_SC02_004_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6c938, data, tail3]
|
||||
- [0x6E26C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x6E26F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x6873c, data, tail]
|
||||
- [0xb9a68, .rodata, ov_SC02_005] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xb9b34, data, tail2]
|
||||
- [0xba658, .rodata, ov_SC02_005_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xba66c, data, tail3]
|
||||
- [0xBCB00, bin, trailing] # final 1 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xBCB01] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x68b8c, data, tail]
|
||||
- [0xc0bc4, .rodata, ov_SC02_011] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc0c90, data, tail2]
|
||||
- [0xc17b4, .rodata, ov_SC02_011_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc17c8, data, tail3]
|
||||
- [0xC3924, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xC3927] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x560a0, data, tail]
|
||||
- [0x65e1c, .rodata, ov_SC02_015] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x65ee8, data, tail2]
|
||||
- [0x66a0c, .rodata, ov_SC02_015_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x66a20, data, tail3]
|
||||
- [0x68544, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x68547] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5c2d8, data, tail]
|
||||
- [0x899fc, .rodata, ov_SC02_016] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x89ac8, data, tail2]
|
||||
- [0x8a5ec, .rodata, ov_SC02_016_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8a600, data, tail3]
|
||||
- [0x8C97C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x8C97F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x62330, data, tail]
|
||||
- [0xc521c, .rodata, ov_SC02_017] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc52e8, data, tail2]
|
||||
- [0xc5e0c, .rodata, ov_SC02_017_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc5e20, data, tail3]
|
||||
- [0xC7BDC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xC7BDF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x57924, data, tail]
|
||||
- [0x68798, .rodata, ov_SC02_021] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x68864, data, tail2]
|
||||
- [0x69388, .rodata, ov_SC02_021_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6939c, data, tail3]
|
||||
- [0x6B744, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x6B747] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5df78, data, tail]
|
||||
- [0xa5bcc, .rodata, ov_SC02_026] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa5c98, data, tail2]
|
||||
- [0xa67bc, .rodata, ov_SC02_026_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa67d0, data, tail3]
|
||||
- [0xA8164, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xA8167] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x6309c, data, tail]
|
||||
- [0xaf938, .rodata, ov_SC02_027] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xafa04, data, tail2]
|
||||
- [0xb0528, .rodata, ov_SC02_027_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xb053c, data, tail3]
|
||||
- [0xB28E4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xB28E7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x632a0, data, tail]
|
||||
- [0xa88bc, .rodata, ov_SC02_028] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa8988, data, tail2]
|
||||
- [0xa94ac, .rodata, ov_SC02_028_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa94c0, data, tail3]
|
||||
- [0xAB4E4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xAB4E7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5cacc, data, tail]
|
||||
- [0x8d0b8, .rodata, ov_SC02_031] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8d184, data, tail2]
|
||||
- [0x8dca8, .rodata, ov_SC02_031_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8dcbc, data, tail3]
|
||||
- [0x8F9B4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x8F9B7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5c32c, data, tail]
|
||||
- [0x94380, .rodata, ov_SC02_035] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9444c, data, tail2]
|
||||
- [0x94f70, .rodata, ov_SC02_035_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x94f84, data, tail3]
|
||||
- [0x968EC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x968EF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x56f58, data, tail]
|
||||
- [0x7676c, .rodata, ov_SC02_039] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x76838, data, tail2]
|
||||
- [0x7735c, .rodata, ov_SC02_039_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x77370, data, tail3]
|
||||
- [0x78CA4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x78CA7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5cc28, data, tail]
|
||||
- [0x8ead8, .rodata, ov_SC02_041] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8eba4, data, tail2]
|
||||
- [0x8f6c8, .rodata, ov_SC02_041_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8f6dc, data, tail3]
|
||||
- [0x9157C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x9157F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x650c8, data, tail]
|
||||
- [0xc3bf8, .rodata, ov_SC03_001] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc3cc4, data, tail2]
|
||||
- [0xc47e8, .rodata, ov_SC03_001_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc47fc, data, tail3]
|
||||
- [0xC730C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xC730F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5d358, data, tail]
|
||||
- [0xa1154, .rodata, ov_SC03_002] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa1220, data, tail2]
|
||||
- [0xa1d44, .rodata, ov_SC03_002_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa1d58, data, tail3]
|
||||
- [0xA39F4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xA39F7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x57120, data, tail]
|
||||
- [0x654d4, .rodata, ov_SC03_003] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x655a0, data, tail2]
|
||||
- [0x660c4, .rodata, ov_SC03_003_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x660d8, data, tail3]
|
||||
- [0x67A24, bin, trailing] # final 1 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x67A25] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x6443c, data, tail]
|
||||
- [0xccd90, .rodata, ov_SC03_006] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xcce5c, data, tail2]
|
||||
- [0xcd980, .rodata, ov_SC03_006_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xcd994, data, tail3]
|
||||
- [0xCF75C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xCF75F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5f234, data, tail]
|
||||
- [0xbf718, .rodata, ov_SC03_007] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xbf7e4, data, tail2]
|
||||
- [0xc0308, .rodata, ov_SC03_007_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc031c, data, tail3]
|
||||
- [0xC316C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xC316F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x57d54, data, tail]
|
||||
- [0x759f4, .rodata, ov_SC03_010] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x75ac0, data, tail2]
|
||||
- [0x765e4, .rodata, ov_SC03_010_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x765f8, data, tail3]
|
||||
- [0x78074, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x78077] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x590c4, data, tail]
|
||||
- [0x77c64, .rodata, ov_SC03_011] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x77d30, data, tail2]
|
||||
- [0x78854, .rodata, ov_SC03_011_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x78868, data, tail3]
|
||||
- [0x7A2A8, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x7A2AB] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x55fa4, data, tail]
|
||||
- [0x6aac0, .rodata, ov_SC03_012] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6ab8c, data, tail2]
|
||||
- [0x6b6b0, .rodata, ov_SC03_012_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6b6c4, data, tail3]
|
||||
- [0x6D004, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x6D007] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x58d8c, data, tail]
|
||||
- [0x82d58, .rodata, ov_SC03_013] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x82e24, data, tail2]
|
||||
- [0x83948, .rodata, ov_SC03_013_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8395c, data, tail3]
|
||||
- [0x853FC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x853FF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x633c8, data, tail]
|
||||
- [0xc012c, .rodata, ov_SC03_014] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc01f8, data, tail2]
|
||||
- [0xc0d1c, .rodata, ov_SC03_014_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc0d30, data, tail3]
|
||||
- [0xC2EE4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xC2EE7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x633c8, data, tail]
|
||||
- [0xc012c, .rodata, ov_SC03_015] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc01f8, data, tail2]
|
||||
- [0xc0d1c, .rodata, ov_SC03_015_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc0d30, data, tail3]
|
||||
- [0xC2EE4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xC2EE7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x56d44, data, tail]
|
||||
- [0x6e704, .rodata, ov_SC03_023] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6e7d0, data, tail2]
|
||||
- [0x6f2f4, .rodata, ov_SC03_023_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6f308, data, tail3]
|
||||
- [0x70C2C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x70C2F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5ed68, data, tail]
|
||||
- [0x96b8c, .rodata, ov_SC03_024] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x96c58, data, tail2]
|
||||
- [0x9777c, .rodata, ov_SC03_024_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x97790, data, tail3]
|
||||
- [0x996F4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x996F7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x63834, data, tail]
|
||||
- [0xc0d14, .rodata, ov_SC03_028] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc0de0, data, tail2]
|
||||
- [0xc1904, .rodata, ov_SC03_028_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc1918, data, tail3]
|
||||
- [0xC44AC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xC44AF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5f66c, data, tail]
|
||||
- [0xaee48, .rodata, ov_SC03_029] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xaef14, data, tail2]
|
||||
- [0xafa38, .rodata, ov_SC03_029_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xafa4c, data, tail3]
|
||||
- [0xB18EC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xB18EF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x59ca8, data, tail]
|
||||
- [0xb74ec, .rodata, ov_SC03_030] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xb75b8, data, tail2]
|
||||
- [0xb80dc, .rodata, ov_SC03_030_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xb80f0, data, tail3]
|
||||
- [0xB9AF0] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
# ` - [0x<word_floor>, bin, trailing]` (the final 1-3 bytes spimdisasm's data path drops);
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5a1c4, data, tail]
|
||||
- [0x9b990, .rodata, ov_SC03_031] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9ba5c, data, tail2]
|
||||
- [0x9c580, .rodata, ov_SC03_031_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9c594, data, tail3]
|
||||
- [0x9E14C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x9E14F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x614c0, data, tail]
|
||||
- [0x9c1fc, .rodata, ov_SC03_089] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9c2c8, data, tail2]
|
||||
- [0x9cdec, .rodata, ov_SC03_089_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9ce00, data, tail3]
|
||||
- [0x9E7C4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x9E7C7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x638e4, data, tail]
|
||||
- [0xa1668, .rodata, ov_SC03_090] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa1734, data, tail2]
|
||||
- [0xa2258, .rodata, ov_SC03_090_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa226c, data, tail3]
|
||||
- [0xA3C34, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xA3C37] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x6478c, data, tail]
|
||||
- [0xa7d34, .rodata, ov_SC03_091] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa7e00, data, tail2]
|
||||
- [0xa8924, .rodata, ov_SC03_091_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa8938, data, tail3]
|
||||
- [0xAA584, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xAA587] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5cb5c, data, tail]
|
||||
- [0x8890c, .rodata, ov_SC03_092] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x889d8, data, tail2]
|
||||
- [0x894fc, .rodata, ov_SC03_092_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x89510, data, tail3]
|
||||
- [0x8AF2C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x8AF2F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5dd34, data, tail]
|
||||
- [0xa1d60, .rodata, ov_SC03_093] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa1e2c, data, tail2]
|
||||
- [0xa2950, .rodata, ov_SC03_093_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa2964, data, tail3]
|
||||
- [0xA4584, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xA4587] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5f730, data, tail]
|
||||
- [0xa8b9c, .rodata, ov_SC03_094] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa8c68, data, tail2]
|
||||
- [0xa978c, .rodata, ov_SC03_094_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa97a0, data, tail3]
|
||||
- [0xAB13C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xAB13F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x58d90, data, tail]
|
||||
- [0x717c8, .rodata, ov_SC03_095] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x71894, data, tail2]
|
||||
- [0x723b8, .rodata, ov_SC03_095_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x723cc, data, tail3]
|
||||
- [0x73D3C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x73D3F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x58910, data, tail]
|
||||
- [0x7027c, .rodata, ov_SC03_096] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x70348, data, tail2]
|
||||
- [0x70e6c, .rodata, ov_SC03_096_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x70e80, data, tail3]
|
||||
- [0x727F4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x727F7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5dcf0, data, tail]
|
||||
- [0x802ec, .rodata, ov_SC03_097] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x803b8, data, tail2]
|
||||
- [0x80edc, .rodata, ov_SC03_097_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x80ef0, data, tail3]
|
||||
- [0x82D74, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x82D77] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5d17c, data, tail]
|
||||
- [0x9af70, .rodata, ov_SC03_098] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9b03c, data, tail2]
|
||||
- [0x9bb60, .rodata, ov_SC03_098_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9bb74, data, tail3]
|
||||
- [0x9D75C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x9D75F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5b27c, data, tail]
|
||||
- [0x94c44, .rodata, ov_SC03_099] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x94d10, data, tail2]
|
||||
- [0x95834, .rodata, ov_SC03_099_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x95848, data, tail3]
|
||||
- [0x97304, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x97307] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5c748, data, tail]
|
||||
- [0x9dec8, .rodata, ov_SC03_100] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9df94, data, tail2]
|
||||
- [0x9eab8, .rodata, ov_SC03_100_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9eacc, data, tail3]
|
||||
- [0xA080C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xA080F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5b724, data, tail]
|
||||
- [0x73790, .rodata, ov_SC03_101] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x7385c, data, tail2]
|
||||
- [0x74380, .rodata, ov_SC03_101_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x74394, data, tail3]
|
||||
- [0x760CC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x760CF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5dfdc, data, tail]
|
||||
- [0x8f40c, .rodata, ov_SC03_102] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8f4d8, data, tail2]
|
||||
- [0x8fffc, .rodata, ov_SC03_102_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x90010, data, tail3]
|
||||
- [0x91ACC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x91ACF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5bf8c, data, tail]
|
||||
- [0x9a5c0, .rodata, ov_SC03_103] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9a68c, data, tail2]
|
||||
- [0x9b1b0, .rodata, ov_SC03_103_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9b1c4, data, tail3]
|
||||
- [0x9CC7C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x9CC7F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x62b1c, data, tail]
|
||||
- [0x95b20, .rodata, ov_SC03_104] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x95bec, data, tail2]
|
||||
- [0x96710, .rodata, ov_SC03_104_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x96724, data, tail3]
|
||||
- [0x9833C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x9833F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x621a4, data, tail]
|
||||
- [0x8ee18, .rodata, ov_SC03_105] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8eee4, data, tail2]
|
||||
- [0x8fa08, .rodata, ov_SC03_105_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8fa1c, data, tail3]
|
||||
- [0x94BC4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x94BC7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x58afc, data, tail]
|
||||
- [0x77320, .rodata, ov_SC03_108] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x773ec, data, tail2]
|
||||
- [0x77f10, .rodata, ov_SC03_108_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x77f24, data, tail3]
|
||||
- [0x7994C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x7994F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x561a8, data, tail]
|
||||
- [0x6fe30, .rodata, ov_SC03_109] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6fefc, data, tail2]
|
||||
- [0x70a20, .rodata, ov_SC03_109_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x70a34, data, tail3]
|
||||
- [0x72354, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x72357] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x59bc8, data, tail]
|
||||
- [0x77acc, .rodata, ov_SC03_110] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x77b98, data, tail2]
|
||||
- [0x786bc, .rodata, ov_SC03_110_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x786d0, data, tail3]
|
||||
- [0x7A384, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x7A387] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5c77c, data, tail]
|
||||
- [0x8f04c, .rodata, ov_SC03_111] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8f118, data, tail2]
|
||||
- [0x8fc3c, .rodata, ov_SC03_111_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8fc50, data, tail3]
|
||||
- [0x91A2C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x91A2F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5d584, data, tail]
|
||||
- [0x827b4, .rodata, ov_SC03_112] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x82880, data, tail2]
|
||||
- [0x833a4, .rodata, ov_SC03_112_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x833b8, data, tail3]
|
||||
- [0x84FF4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x84FF7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5ac34, data, tail]
|
||||
- [0x7b43c, .rodata, ov_SC03_113] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x7b508, data, tail2]
|
||||
- [0x7c02c, .rodata, ov_SC03_113_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x7c040, data, tail3]
|
||||
- [0x7DB94, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x7DB97] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5689c, data, tail]
|
||||
- [0x7f148, .rodata, ov_SC03_114] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x7f214, data, tail2]
|
||||
- [0x7fd38, .rodata, ov_SC03_114_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x7fd4c, data, tail3]
|
||||
- [0x8170C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x8170F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x58308, data, tail]
|
||||
- [0x6aabc, .rodata, ov_SC03_115] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6ab88, data, tail2]
|
||||
- [0x6b6ac, .rodata, ov_SC03_115_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6b6c0, data, tail3]
|
||||
- [0x6CFE4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x6CFE7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5a70c, data, tail]
|
||||
- [0x6d658, .rodata, ov_SC03_116] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6d724, data, tail2]
|
||||
- [0x6e248, .rodata, ov_SC03_116_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6e25c, data, tail3]
|
||||
- [0x6FBF4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x6FBF7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5c718, data, tail]
|
||||
- [0xa3cf8, .rodata, ov_SC03_117] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa3dc4, data, tail2]
|
||||
- [0xa48e8, .rodata, ov_SC03_117_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa48fc, data, tail3]
|
||||
- [0xA67EC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xA67EF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x617c4, data, tail]
|
||||
- [0xa9c54, .rodata, ov_SC03_118] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa9d20, data, tail2]
|
||||
- [0xaa844, .rodata, ov_SC03_118_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xaa858, data, tail3]
|
||||
- [0xAC6F4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xAC6F7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x617c4, data, tail]
|
||||
- [0xa9c54, .rodata, ov_SC03_119] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xa9d20, data, tail2]
|
||||
- [0xaa844, .rodata, ov_SC03_119_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xaa858, data, tail3]
|
||||
- [0xAC6F4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xAC6F7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x59fe0, data, tail]
|
||||
- [0x8475c, .rodata, ov_SC03_121] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x84828, data, tail2]
|
||||
- [0x8534c, .rodata, ov_SC03_121_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x85360, data, tail3]
|
||||
- [0x86E54, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x86E57] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x6276c, data, tail]
|
||||
- [0xb6eb0, .rodata, ov_SC03_124] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xb6f7c, data, tail2]
|
||||
- [0xb7aa0, .rodata, ov_SC03_124_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xb7ab4, data, tail3]
|
||||
- [0xBA48C, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xBA48F] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5bbdc, data, tail]
|
||||
- [0x99b9c, .rodata, ov_SC03_125] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x99c68, data, tail2]
|
||||
- [0x9a78c, .rodata, ov_SC03_125_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9a7a0, data, tail3]
|
||||
- [0x9C3E4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x9C3E7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x570d4, data, tail]
|
||||
- [0x65488, .rodata, ov_SC03_126] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x65554, data, tail2]
|
||||
- [0x66078, .rodata, ov_SC03_126_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6608c, data, tail3]
|
||||
- [0x679D4, bin, trailing] # final 1 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x679D5] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5b0e0, data, tail]
|
||||
- [0x7f504, .rodata, ov_SC04_000] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x7f5d0, data, tail2]
|
||||
- [0x800f4, .rodata, ov_SC04_000_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x80108, data, tail3]
|
||||
- [0x82EFC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x82EFF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x6024c, data, tail]
|
||||
- [0x96854, .rodata, ov_SC04_002] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x96920, data, tail2]
|
||||
- [0x97444, .rodata, ov_SC04_002_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x97458, data, tail3]
|
||||
- [0x995DC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x995DF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x59fe8, data, tail]
|
||||
- [0x714d0, .rodata, ov_SC04_003] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x7159c, data, tail2]
|
||||
- [0x720c0, .rodata, ov_SC04_003_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x720d4, data, tail3]
|
||||
- [0x73A94, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x73A97] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5c51c, data, tail]
|
||||
- [0x892cc, .rodata, ov_SC04_004] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x89398, data, tail2]
|
||||
- [0x89ebc, .rodata, ov_SC04_004_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x89ed0, data, tail3]
|
||||
- [0x8BAFC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x8BAFF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5f950, data, tail]
|
||||
- [0x97490, .rodata, ov_SC04_005] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9755c, data, tail2]
|
||||
- [0x98080, .rodata, ov_SC04_005_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x98094, data, tail3]
|
||||
- [0x9A1D4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x9A1D7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x57a30, data, tail]
|
||||
- [0x73738, .rodata, ov_SC04_006] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x73804, data, tail2]
|
||||
- [0x74328, .rodata, ov_SC04_006_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x7433c, data, tail3]
|
||||
- [0x75C74, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x75C77] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5d9e8, data, tail]
|
||||
- [0x8acf4, .rodata, ov_SC04_007] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8adc0, data, tail2]
|
||||
- [0x8b8e4, .rodata, ov_SC04_007_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8b8f8, data, tail3]
|
||||
- [0x8DA34, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x8DA37] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x56920, data, tail]
|
||||
- [0x679dc, .rodata, ov_SC04_008] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x67aa8, data, tail2]
|
||||
- [0x685cc, .rodata, ov_SC04_008_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x685e0, data, tail3]
|
||||
- [0x6B364, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x6B367] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5694c, data, tail]
|
||||
- [0x6dbf0, .rodata, ov_SC04_009] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6dcbc, data, tail2]
|
||||
- [0x6e7e0, .rodata, ov_SC04_009_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6e7f4, data, tail3]
|
||||
- [0x70114, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x70117] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x55ff8, data, tail]
|
||||
- [0x6507c, .rodata, ov_SC04_010] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x65148, data, tail2]
|
||||
- [0x65c6c, .rodata, ov_SC04_010_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x65c80, data, tail3]
|
||||
- [0x675EC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x675EF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x68288, data, tail]
|
||||
- [0xc4618, .rodata, ov_SC04_011] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc46e4, data, tail2]
|
||||
- [0xc5208, .rodata, ov_SC04_011_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xc521c, data, tail3]
|
||||
- [0xC9554, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xC9557] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5645c, data, tail]
|
||||
- [0x6775c, .rodata, ov_SC04_012] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x67828, data, tail2]
|
||||
- [0x6834c, .rodata, ov_SC04_012_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x68360, data, tail3]
|
||||
- [0x6B0E4, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x6B0E7] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5c38c, data, tail]
|
||||
- [0x9e3f4, .rodata, ov_SC04_015] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9e4c0, data, tail2]
|
||||
- [0x9efe4, .rodata, ov_SC04_015_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x9eff8, data, tail3]
|
||||
- [0xA1284, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xA1287] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x57e58, data, tail]
|
||||
- [0x7c5ac, .rodata, ov_SC04_016] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x7c678, data, tail2]
|
||||
- [0x7d19c, .rodata, ov_SC04_016_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x7d1b0, data, tail3]
|
||||
- [0x84184, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x84187] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x64dd0, data, tail]
|
||||
- [0xbc3c4, .rodata, ov_SC04_018] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xbc490, data, tail2]
|
||||
- [0xbcfb4, .rodata, ov_SC04_018_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xbcfc8, data, tail3]
|
||||
- [0xBF9CC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xBF9CF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x64dd0, data, tail]
|
||||
- [0xbc3c4, .rodata, ov_SC04_019] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xbc490, data, tail2]
|
||||
- [0xbcfb4, .rodata, ov_SC04_019_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0xbcfc8, data, tail3]
|
||||
- [0xBF9CC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0xBF9CF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5b1a8, data, tail]
|
||||
- [0x91dec, .rodata, ov_SC04_020] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x91eb8, data, tail2]
|
||||
- [0x929dc, .rodata, ov_SC04_020_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x929f0, data, tail3]
|
||||
- [0x94654, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x94657] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x570d4, data, tail]
|
||||
- [0x65488, .rodata, ov_SC04_021] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x65554, data, tail2]
|
||||
- [0x66078, .rodata, ov_SC04_021_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x6608c, data, tail3]
|
||||
- [0x679D4, bin, trailing] # final 1 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x679D5] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x560e8, data, tail]
|
||||
- [0x705d8, .rodata, ov_SC05_000] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x706a4, data, tail2]
|
||||
- [0x711c8, .rodata, ov_SC05_000_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x711dc, data, tail3]
|
||||
- [0x72AFC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x72AFF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5d8c4, data, tail]
|
||||
- [0x8b58c, .rodata, ov_SC05_001] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8b658, data, tail2]
|
||||
- [0x8c17c, .rodata, ov_SC05_001_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x8c190, data, tail3]
|
||||
- [0x8DEAC, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x8DEAF] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x58084, data, tail]
|
||||
- [0x75938, .rodata, ov_SC05_002] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x75a04, data, tail2]
|
||||
- [0x76528, .rodata, ov_SC05_002_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x7653c, data, tail3]
|
||||
- [0x77E64, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x77E67] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
@@ -99,6 +99,8 @@ segments:
|
||||
- [0x5a3bc, data, tail]
|
||||
- [0x82434, .rodata, ov_SC05_003] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x82500, data, tail2]
|
||||
- [0x83024, .rodata, ov_SC05_003_after] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
||||
- [0x83038, data, tail3]
|
||||
- [0x84974, bin, trailing] # final 3 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
||||
- [0x84977] # EOF marker = the 0.4.dec byte length
|
||||
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user