[docs] Forbid profanity, misc. writing

Signed-off-by: lizzie <lizzie@eden-emu.dev>

CONTRIBUTING.md

@@ -22,9 +22,9 @@ Eden is free, open-source, copyleft software, licensed under the terms of the [G
 
 - No LLM or AI usage, *period*, for patches, pull requests, issues, comments, debugging, brainstorming, etc.
   - For details on why, see the [detailed AI policy](docs/policies/AI.md).
-- Usage of any form of profanity or otherwise unsavory language is generally discouraged.
+- Usage of any form of profanity or otherwise unsavory language is prohibited.
   - This is primarily because it rarely helps to actually understand what's going on.
-  - Remember that your comments should be focused and actually address what's happening. With very few exceptions, expletives are actively detrimental at best.
+  - Remember that your comments should be focused and actually address what's happening.
 - New code must follow the same general style as the surrounding codebase. Exceptions may be granted in certain cases.
 - Maintainers reserve the right to change your patches and pull requests at will. We will try to avoid this.
   - You should generally respect all decisions made by the [code owners](docs/CODEOWNERS) in your particular subsystem.

docs/Caveats.md

@@ -239,6 +239,6 @@ find ./*/ -name "*.dll" | while read -r dll; do deps "$dll"; done
 
 ## RedoxOS
 
-The package install may randomly hang at times, in which case it has to be restarted. ALWAYS do a `sudo pkg update` or the chances of it hanging will be close to 90%. If "multiple" installs fail at once, try installing 1 by 1 the packages.
+Package installs randomly hang at times, you may need to restart it about 3-5 times to complete. Always do `sudo pkg update` or it will hang. Try installing each package individually.
 
-When CMake invokes certain file syscalls - it may sometimes cause crashes or corruptions on the (kernel?) address space - so reboot the system if there is a "hang" in CMake.
+When CMake invokes certain file syscalls - most of the time it causes crashes, and corruptions on the address space. Reboot if there's a freeze over 5 minutes.

docs/Development.md

@@ -38,7 +38,7 @@ Pull requests are only to be merged by core developers when properly tested and
 
 - The level of namespacing is generally left to the committer's choice.
 - However, we never recommend going more than two levels *except* in `hle`, in which case you may go as many as four levels depending on the specificity of your changes.
-- Ocassionally, up to two additional namespaces may be provided for more clarity.
+- Occasionally, up to two additional namespaces may be provided for more clarity.
   - Changes that affect the entire project (sans CMake changes) should be namespaced as `meta`.
 - Maintainers are permitted to change namespaces at will.
 - Commits within PRs are not required to be namespaced, but it is highly recommended.
@@ -51,8 +51,8 @@ When adding new settings, use `tr("Setting:")` if the setting is meant to be a f
 - Debug settings must never be turned on by default.
 - Provide reasonable bounds (for example, a setting controlling the amount of VRAM should never be 0).
 - The description of the setting must be short and concise, if the setting "does a lot of things" consider splitting the setting into multiple if possible.
-- Try to avoid excessive/redundant explainations "recommended for most users and games" can just be "(recommended)".
-- Try to not write "slow/fast" options unless it clearly degrades/increases performance for a given case, as most options may modify behaviour that result in different metrics accross different systems. If for example the option is an "accuracy" option, writing "High" is sufficient to imply "Slow". No need to write "High (Slow)".
+- Try to avoid excessive/redundant explanations "recommended for most users and games" can just be "(recommended)".
+- Try to not write "slow/fast" options unless it clearly degrades/increases performance for a given case, as most options may modify behavior that result in different metrics across different systems. If for example the option is an "accuracy" option, writing "High" is sufficient to imply "Slow". No need to write "High (Slow)".
 
 Some examples:
 
@@ -91,7 +91,7 @@ You may additionally need the `Qt Extension Pack` extension if building Qt.
 
 # Build speedup
 
-If you have an HDD, use ramdisk (build in RAM), approximately you need 4GB for a full build with debug symbols:
+If you have an HDD, use ramdisk (build in RAM); you need about 4GB for a `RelWithDebInfo` build:
 
 ```sh
 mkdir /tmp/ramdisk

docs/Settings.md

@@ -3,9 +3,9 @@
 > [!WARNING]
 > This guide is intended for developers ONLY. If you're looking for configuring the emulator itself, read **[the user handbook](./user/README.md)**.
 
-Settings on the emulator are very important, toggles and such can be used to guard and/or add branches to paths where some games may crash while others won't, and viceversa.
+Settings have their own dedicated subsystem. Toggles can be added to gate features and fixes, as not all of them apply to every game.
 
-However, this process can be tedious for those unfamiliar; this document serves as an outline/documentation for the settings subsystem.
+However, this process can be tedious for those unfamiliar; this document serves as an outline for the settings subsystem.
 
 ## Index
 

docs/user/Architectures.md

@@ -12,7 +12,7 @@ AMD64, aka x86_64, is the most tested and supported architecture for desktop tar
 
 ### Caveats
 
-AMD64 systems are almost always limited by the CPU. For example, a Zen 5/RX 6600 system will often hit max CPU usage before the GPU ever reaches 70% usage, with minimal exceptions (that tend to pop up only at >200fps). JIT is slow!
+AMD64 systems are almost always limited by the CPU. For example, a Zen 5/RX 6600 system will often hit max CPU usage before the GPU ever reaches 70% usage, with minimal exceptions (that tend to pop up only at >200fps). JIT is slow.
 
 Computers on Linux will almost always run Eden strictly better than an equivalent machine on Windows. This is largely due to the way the Linux kernel handles memory management (and the lack of Microsoft spyware).
 
@@ -24,7 +24,7 @@ ARM64, aka aarch64, is the only supported architecture for Android, with limited
 
 ### Caveats
 
-NCE (Native Code Execution) is currently only available on Android and (experimentally) Linux. Support for macOS is in the works, but Windows is extremely unlikely to ever happen (if you want it--submit patches!). Generally, if NCE is available, you should pretty much always use it due to the massive performance hit JIT has.
+NCE (Native Code Execution) is currently only available on Android and (experimentally) Linux. Support for macOS is in the works, but Windows is extremely unlikely to ever happen (if you want it -- submit patches). Generally, if NCE is available, you should pretty much always use it due to the massive performance hit JIT has.
 
 When NCE is enabled, do note that the GPU will almost always be the limiting factor. This is especially the case for Android, as well as desktops that lack dedicated GPUs; Adreno, Mali, PowerVR, etc. GPUs are generally significantly weaker relative to their respective CPUs.
 
@@ -44,7 +44,7 @@ Only Fedora/riscv64 has been tested, but in theory, every riscv64 distribution t
 
 ## Other
 
-Other architectures, such as SPARC, MIPS, PowerPC, Loong, and all 32-bit architectures are completely unsupported, as there is no JIT backend or emitter thereof. If you want support for it -- submit patches!
+Other architectures, such as SPARC, MIPS, PowerPC, Loong, and all 32-bit architectures are completely unsupported, as there is no JIT backend or emitter thereof. If you want support for it -- submit patches.
 
 IA-64 (Itanium) support is completely unknown. Existing amd64 packages will not run on IA-64 (assuming you can even find a supported Windows/Linux distribution)
 
@@ -106,14 +106,14 @@ Qualcomm Snapdragon SoCs are generally the most well supported.
   * A good base to compare to is the Snapdragon 865--e.g. [Tensor vs SD865](https://archive.is/M1P58)
   * Some benchmarks may be misleading due to thermal throttling OR RAM requirements.
     - For example, a Pixel 6a (Tensor G1) performs about 1/3 as well as an 865 due to its lack of RAM and poor thermals.
-  * Remember--always use a cooler if you can, and you MUST have *at least* 8GB of RAM!
+  * Remember--always use a cooler if you can, and you MUST have *at least* 8GB of RAM.
 - If you're not sure what SoC you have, check [GSMArena](https://www.gsmarena.com) - e.g. [Pixel 9 Pro](https://archive.ph/91VhA)
 
 Custom ROMs are recommended, *as long as* you know what you're doing.
 - For most devices, [LineageOS](https://lineageos.org/) is preferred.
 - [CalyxOS](https://calyxos.org/) is available as well.
 - For Google Pixel devices ONLY... and [soon another OEM](https://archive.ph/cPpMd)... [GrapheneOS](https://grapheneos.org/) is highly recommended.
-  * As of October 5, 2025, the Pixel 10 line is unsupported, however, [it will be](https://archive.is/viAUl) in the very near future!
+  * As of October 5, 2025, the Pixel 10 line is unsupported, however, [it will be](https://archive.is/viAUl) in the very near future.
   * Keep checking the [FAQ page](https://grapheneos.org/faq#supported-devices) for news.
 - Custom ROMs will likely be exclusively recommended in the future due to Google's upcoming [draconian](https://archive.is/hGIjZ), [anti-privacy, anti-user](https://archive.is/mc1CJ) verification requirements.
 

externals/tz/tz/tz.h

@@ -11,7 +11,6 @@
 #include <limits>
 #include <span>
 #include <array>
-#include <algorithm>
 #include <time.h>
 
 namespace Tz {

src/common/CMakeLists.txt

@@ -89,6 +89,7 @@ add_library(
     param_package.h
     parent_of_member.h
     point.h
+    quaternion.h
     range_map.h
     range_mutex.h
     range_sets.h

src/common/demangle.cpp

@@ -5,7 +5,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
 #include <string>
-#include <cstdlib>
 #include <string_view>
 #ifdef _WIN32
 #include <llvm/Demangle/Demangle.h>

src/common/quaternion.h

@@ -0,0 +1,79 @@
+// SPDX-FileCopyrightText: 2016 Citra Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "common/vector_math.h"
+
+namespace Common {
+
+template <typename T>
+class Quaternion {
+public:
+    Vec3<T> xyz;
+    T w{};
+
+    [[nodiscard]] Quaternion<decltype(-T{})> Inverse() const {
+        return {-xyz, w};
+    }
+
+    [[nodiscard]] Quaternion<decltype(T{} + T{})> operator+(const Quaternion& other) const {
+        return {xyz + other.xyz, w + other.w};
+    }
+
+    [[nodiscard]] Quaternion<decltype(T{} - T{})> operator-(const Quaternion& other) const {
+        return {xyz - other.xyz, w - other.w};
+    }
+
+    [[nodiscard]] Quaternion<decltype(T{} * T{} - T{} * T{})> operator*(
+        const Quaternion& other) const {
+        return {xyz * other.w + other.xyz * w + Cross(xyz, other.xyz),
+                w * other.w - Dot(xyz, other.xyz)};
+    }
+
+    [[nodiscard]] Quaternion<T> Normalized() const {
+        T length = std::sqrt(xyz.Length2() + w * w);
+        return {xyz / length, w / length};
+    }
+
+    [[nodiscard]] std::array<decltype(-T{}), 16> ToMatrix() const {
+        const T x2 = xyz[0] * xyz[0];
+        const T y2 = xyz[1] * xyz[1];
+        const T z2 = xyz[2] * xyz[2];
+
+        const T xy = xyz[0] * xyz[1];
+        const T wz = w * xyz[2];
+        const T xz = xyz[0] * xyz[2];
+        const T wy = w * xyz[1];
+        const T yz = xyz[1] * xyz[2];
+        const T wx = w * xyz[0];
+
+        return {1.0f - 2.0f * (y2 + z2),
+                2.0f * (xy + wz),
+                2.0f * (xz - wy),
+                0.0f,
+                2.0f * (xy - wz),
+                1.0f - 2.0f * (x2 + z2),
+                2.0f * (yz + wx),
+                0.0f,
+                2.0f * (xz + wy),
+                2.0f * (yz - wx),
+                1.0f - 2.0f * (x2 + y2),
+                0.0f,
+                0.0f,
+                0.0f,
+                0.0f,
+                1.0f};
+    }
+};
+
+template <typename T>
+[[nodiscard]] auto QuaternionRotate(const Quaternion<T>& q, const Vec3<T>& v) {
+    return v + 2 * Cross(q.xyz, Cross(q.xyz, v) + v * q.w);
+}
+
+[[nodiscard]] inline Quaternion<float> MakeQuaternion(const Vec3<float>& axis, float angle) {
+    return {axis * std::sin(angle / 2), std::cos(angle / 2)};
+}
+
+} // namespace Common

src/common/vector_math.h

@@ -1,4 +1,4 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
+// SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
 // SPDX-License-Identifier: GPL-3.0-or-later
 
 // SPDX-FileCopyrightText: 2014 Tony Wasserka
@@ -7,128 +7,752 @@
 
 #pragma once
 
+#ifdef __ARM_NEON
+#include <arm_neon.h>
+#endif
+
 #include <cmath>
 #include <type_traits>
 
 namespace Common {
 
-template <typename T, size_t N>
-class Vec {
+template <typename T>
+class Vec2;
+template <typename T>
+class Vec3;
+template <typename T>
+class Vec4;
+
+template <typename T>
+class Vec2 {
 public:
-    std::array<T, N> elems{};
+    T x{};
+    T y{};
 
-    constexpr Vec() = default;
-    constexpr Vec(T e0) noexcept : elems{e0} {}
-    constexpr Vec(T e0, T e1) noexcept : elems{e0, e1} {}
-    constexpr Vec(T e0, T e1, T e2) noexcept : elems{e0, e1, e2} {}
-    constexpr Vec(T e0, T e1, T e2, T e4) noexcept : elems{e0, e1, e2, e4} {}
-    //explicit constexpr Vec(const std::initializer_list<T> elems_) noexcept : elems{elems_} {}
+    constexpr Vec2() = default;
+    constexpr Vec2(const T& x_, const T& y_) : x(x_), y(y_) {}
 
-    [[nodiscard]] constexpr Vec<decltype(T{} + T{}), N> operator+(const Vec o) const noexcept {
-        Vec<decltype(T{} + T{}), N> r{};
-        for (size_t i = 0; i < N; ++i)
-            r.elems[i] = elems[i] + o.elems[i];
-        return r;
+    template <typename T2>
+    [[nodiscard]] constexpr Vec2<T2> Cast() const {
+        return Vec2<T2>(static_cast<T2>(x), static_cast<T2>(y));
     }
-    constexpr Vec<T, N> operator+=(const Vec<T, N> o) noexcept { return *this = *this + o; }
 
-    [[nodiscard]] constexpr Vec<decltype(T{} - T{}), N> operator-(const Vec o) const noexcept {
-        Vec<decltype(T{} - T{}), N> r{};
-        for (size_t i = 0; i < N; ++i)
-            r.elems[i] = elems[i] - o.elems[i];
-        return r;
+    [[nodiscard]] static constexpr Vec2 AssignToAll(const T& f) {
+        return Vec2{f, f};
+    }
+
+    [[nodiscard]] constexpr Vec2<decltype(T{} + T{})> operator+(const Vec2& other) const {
+        return {x + other.x, y + other.y};
+    }
+    constexpr Vec2& operator+=(const Vec2& other) {
+        x += other.x;
+        y += other.y;
+        return *this;
+    }
+    [[nodiscard]] constexpr Vec2<decltype(T{} - T{})> operator-(const Vec2& other) const {
+        return {x - other.x, y - other.y};
+    }
+    constexpr Vec2& operator-=(const Vec2& other) {
+        x -= other.x;
+        y -= other.y;
+        return *this;
     }
-    constexpr Vec<T, N> operator-=(const Vec<T, N> o) noexcept { return *this = *this - o; }
 
     template <typename U = T>
-    [[nodiscard]] constexpr Vec<std::enable_if_t<std::is_signed_v<U>, U>, N> operator-() const noexcept {
-        Vec<U, N> r{};
-        for (size_t i = 0; i < N; ++i)
-            r.elems[i] = -elems[i];
-        return r;
+    [[nodiscard]] constexpr Vec2<std::enable_if_t<std::is_signed_v<U>, U>> operator-() const {
+        return {-x, -y};
+    }
+    [[nodiscard]] constexpr Vec2<decltype(T{} * T{})> operator*(const Vec2& other) const {
+        return {x * other.x, y * other.y};
     }
 
-    [[nodiscard]] constexpr Vec<decltype(T{} * T{}), N> operator*(const Vec o) const noexcept {
-        Vec<decltype(T{} * T{}), N> r{};
-        for (size_t i = 0; i < N; ++i)
-            r.elems[i] = elems[i] * o.elems[i];
-        return r;
-    }
     template <typename V>
-    [[nodiscard]] constexpr Vec<decltype(T{} * V{}), N> operator*(const V f) const noexcept {
+    [[nodiscard]] constexpr Vec2<decltype(T{} * V{})> operator*(const V& f) const {
         using TV = decltype(T{} * V{});
         using C = std::common_type_t<T, V>;
-        Vec<TV, N> r{};
-        for (size_t i = 0; i < N; ++i)
-            r.elems[i] = TV(C(elems[i]) * C(f));
-        return r;
+
+        return {
+            static_cast<TV>(static_cast<C>(x) * static_cast<C>(f)),
+            static_cast<TV>(static_cast<C>(y) * static_cast<C>(f)),
+        };
     }
-    template <typename V>
-    constexpr Vec<T, N> operator*=(const V f) noexcept { return *this = *this * f; }
 
     template <typename V>
-    [[nodiscard]] constexpr Vec<decltype(T{} / V{}), N> operator/(const V f) const noexcept {
+    constexpr Vec2& operator*=(const V& f) {
+        *this = *this * f;
+        return *this;
+    }
+
+    template <typename V>
+    [[nodiscard]] constexpr Vec2<decltype(T{} / V{})> operator/(const V& f) const {
         using TV = decltype(T{} / V{});
         using C = std::common_type_t<T, V>;
-        Vec<TV, N> r{};
-        for (size_t i = 0; i < N; ++i)
-            r.elems[i] = TV(C(elems[i]) / C(f));
-        return r;
-    }
-    template <typename V>
-    constexpr Vec<T, N> operator/=(const V f) noexcept { return *this = *this / f; }
 
-    [[nodiscard]] constexpr T Length2() const noexcept {
-        T r{};
-        for (size_t i = 0; i < N; ++i)
-            r += elems[i] * elems[i];
-        return r;
-    }
-    // Only implemented for T=float
-    [[nodiscard]] T Length() const { return T(std::sqrt(float(Length2()))); }
-    [[nodiscard]] Vec<T, N> Normalized() const { return *this / Length(); }
-    [[nodiscard]] constexpr T& operator[](std::size_t i) noexcept { return elems[i]; }
-    [[nodiscard]] constexpr const T& operator[](std::size_t i) const noexcept { return elems[i]; }
-
-    [[nodiscard]] std::array<decltype(-T{}), 16> ToMatrix() const {
-        const T x2 = elems[0] * elems[0];
-        const T y2 = elems[1] * elems[1];
-        const T z2 = elems[2] * elems[2];
-
-        const T xy = elems[0] * elems[1];
-        const T wz = elems[3] * elems[2];
-        const T xz = elems[0] * elems[2];
-        const T wy = elems[3] * elems[1];
-        const T yz = elems[1] * elems[2];
-        const T wx = elems[3] * elems[0];
         return {
-            1.0f - 2.0f * (y2 + z2),
-            2.0f * (xy + wz),
-            2.0f * (xz - wy),
-            0.0f,
-            2.0f * (xy - wz),
-            1.0f - 2.0f * (x2 + z2),
-            2.0f * (yz + wx),
-            0.0f,
-            2.0f * (xz + wy),
-            2.0f * (yz - wx),
-            1.0f - 2.0f * (x2 + y2),
-            0.0f,
-            0.0f,
-            0.0f,
-            0.0f,
-            1.0f
+            static_cast<TV>(static_cast<C>(x) / static_cast<C>(f)),
+            static_cast<TV>(static_cast<C>(y) / static_cast<C>(f)),
         };
     }
+
+    template <typename V>
+    constexpr Vec2& operator/=(const V& f) {
+        *this = *this / f;
+        return *this;
+    }
+
+    [[nodiscard]] constexpr T Length2() const {
+        return x * x + y * y;
+    }
+
+    // Only implemented for T=float
+    [[nodiscard]] float Length() const;
+    [[nodiscard]] float Normalize(); // returns the previous length, which is often useful
+
+    [[nodiscard]] constexpr T& operator[](std::size_t i) {
+        return *((&x) + i);
+    }
+    [[nodiscard]] constexpr const T& operator[](std::size_t i) const {
+        return *((&x) + i);
+    }
+
+    constexpr void SetZero() {
+        x = 0;
+        y = 0;
+    }
+
+    // Common aliases: UV (texel coordinates), ST (texture coordinates)
+    [[nodiscard]] constexpr T& u() {
+        return x;
+    }
+    [[nodiscard]] constexpr T& v() {
+        return y;
+    }
+    [[nodiscard]] constexpr T& s() {
+        return x;
+    }
+    [[nodiscard]] constexpr T& t() {
+        return y;
+    }
+
+    [[nodiscard]] constexpr const T& u() const {
+        return x;
+    }
+    [[nodiscard]] constexpr const T& v() const {
+        return y;
+    }
+    [[nodiscard]] constexpr const T& s() const {
+        return x;
+    }
+    [[nodiscard]] constexpr const T& t() const {
+        return y;
+    }
+
+    // swizzlers - create a subvector of specific components
+    [[nodiscard]] constexpr Vec2 yx() const {
+        return Vec2(y, x);
+    }
+    [[nodiscard]] constexpr Vec2 vu() const {
+        return Vec2(y, x);
+    }
+    [[nodiscard]] constexpr Vec2 ts() const {
+        return Vec2(y, x);
+    }
 };
 
-template <typename T, size_t N, typename V>
-[[nodiscard]] constexpr Vec<T, N> operator*(const V f, const Vec<T, N> v) noexcept {
+template <typename T, typename V>
+[[nodiscard]] constexpr Vec2<T> operator*(const V& f, const Vec2<T>& vec) {
     using C = std::common_type_t<T, V>;
-    Vec<T, N> r{};
-    for (size_t i = 0; i < N; ++i)
-        r.elems[i] = T(C(f) * C(v.elems[i]));
-    return r;
+
+    return Vec2<T>(static_cast<T>(static_cast<C>(f) * static_cast<C>(vec.x)),
+                   static_cast<T>(static_cast<C>(f) * static_cast<C>(vec.y)));
+}
+
+using Vec2f = Vec2<float>;
+
+template <>
+inline float Vec2<float>::Length() const {
+    return std::sqrt(x * x + y * y);
+}
+
+template <>
+inline float Vec2<float>::Normalize() {
+    float length = Length();
+    *this /= length;
+    return length;
+}
+
+template <typename T>
+class Vec3 {
+public:
+    T x{};
+    T y{};
+    T z{};
+
+    constexpr Vec3() = default;
+    constexpr Vec3(const T& x_, const T& y_, const T& z_) : x(x_), y(y_), z(z_) {}
+
+    template <typename T2>
+    [[nodiscard]] constexpr Vec3<T2> Cast() const {
+        return Vec3<T2>(static_cast<T2>(x), static_cast<T2>(y), static_cast<T2>(z));
+    }
+
+    [[nodiscard]] static constexpr Vec3 AssignToAll(const T& f) {
+        return Vec3(f, f, f);
+    }
+
+    [[nodiscard]] constexpr Vec3<decltype(T{} + T{})> operator+(const Vec3& other) const {
+        return {x + other.x, y + other.y, z + other.z};
+    }
+
+    constexpr Vec3& operator+=(const Vec3& other) {
+        x += other.x;
+        y += other.y;
+        z += other.z;
+        return *this;
+    }
+
+    [[nodiscard]] constexpr Vec3<decltype(T{} - T{})> operator-(const Vec3& other) const {
+        return {x - other.x, y - other.y, z - other.z};
+    }
+
+    constexpr Vec3& operator-=(const Vec3& other) {
+        x -= other.x;
+        y -= other.y;
+        z -= other.z;
+        return *this;
+    }
+
+    template <typename U = T>
+    [[nodiscard]] constexpr Vec3<std::enable_if_t<std::is_signed_v<U>, U>> operator-() const {
+        return {-x, -y, -z};
+    }
+
+    [[nodiscard]] constexpr Vec3<decltype(T{} * T{})> operator*(const Vec3& other) const {
+        return {x * other.x, y * other.y, z * other.z};
+    }
+
+    template <typename V>
+    [[nodiscard]] constexpr Vec3<decltype(T{} * V{})> operator*(const V& f) const {
+        using TV = decltype(T{} * V{});
+        using C = std::common_type_t<T, V>;
+
+        return {
+            static_cast<TV>(static_cast<C>(x) * static_cast<C>(f)),
+            static_cast<TV>(static_cast<C>(y) * static_cast<C>(f)),
+            static_cast<TV>(static_cast<C>(z) * static_cast<C>(f)),
+        };
+    }
+
+    template <typename V>
+    constexpr Vec3& operator*=(const V& f) {
+        *this = *this * f;
+        return *this;
+    }
+    template <typename V>
+    [[nodiscard]] constexpr Vec3<decltype(T{} / V{})> operator/(const V& f) const {
+        using TV = decltype(T{} / V{});
+        using C = std::common_type_t<T, V>;
+
+        return {
+            static_cast<TV>(static_cast<C>(x) / static_cast<C>(f)),
+            static_cast<TV>(static_cast<C>(y) / static_cast<C>(f)),
+            static_cast<TV>(static_cast<C>(z) / static_cast<C>(f)),
+        };
+    }
+
+    template <typename V>
+    constexpr Vec3& operator/=(const V& f) {
+        *this = *this / f;
+        return *this;
+    }
+
+    void RotateFromOrigin(float roll, float pitch, float yaw) {
+        float temp = y;
+        y = std::cos(roll) * y - std::sin(roll) * z;
+        z = std::sin(roll) * temp + std::cos(roll) * z;
+
+        temp = x;
+        x = std::cos(pitch) * x + std::sin(pitch) * z;
+        z = -std::sin(pitch) * temp + std::cos(pitch) * z;
+
+        temp = x;
+        x = std::cos(yaw) * x - std::sin(yaw) * y;
+        y = std::sin(yaw) * temp + std::cos(yaw) * y;
+    }
+
+    [[nodiscard]] constexpr T Length2() const {
+        return x * x + y * y + z * z;
+    }
+
+    // Only implemented for T=float
+    [[nodiscard]] float Length() const;
+    [[nodiscard]] Vec3 Normalized() const;
+    [[nodiscard]] float Normalize(); // returns the previous length, which is often useful
+
+    [[nodiscard]] constexpr T& operator[](std::size_t i) {
+        return *((&x) + i);
+    }
+
+    [[nodiscard]] constexpr const T& operator[](std::size_t i) const {
+        return *((&x) + i);
+    }
+
+    constexpr void SetZero() {
+        x = 0;
+        y = 0;
+        z = 0;
+    }
+
+    // Common aliases: UVW (texel coordinates), RGB (colors), STQ (texture coordinates)
+    [[nodiscard]] constexpr T& u() {
+        return x;
+    }
+    [[nodiscard]] constexpr T& v() {
+        return y;
+    }
+    [[nodiscard]] constexpr T& w() {
+        return z;
+    }
+
+    [[nodiscard]] constexpr T& r() {
+        return x;
+    }
+    [[nodiscard]] constexpr T& g() {
+        return y;
+    }
+    [[nodiscard]] constexpr T& b() {
+        return z;
+    }
+
+    [[nodiscard]] constexpr T& s() {
+        return x;
+    }
+    [[nodiscard]] constexpr T& t() {
+        return y;
+    }
+    [[nodiscard]] constexpr T& q() {
+        return z;
+    }
+
+    [[nodiscard]] constexpr const T& u() const {
+        return x;
+    }
+    [[nodiscard]] constexpr const T& v() const {
+        return y;
+    }
+    [[nodiscard]] constexpr const T& w() const {
+        return z;
+    }
+
+    [[nodiscard]] constexpr const T& r() const {
+        return x;
+    }
+    [[nodiscard]] constexpr const T& g() const {
+        return y;
+    }
+    [[nodiscard]] constexpr const T& b() const {
+        return z;
+    }
+
+    [[nodiscard]] constexpr const T& s() const {
+        return x;
+    }
+    [[nodiscard]] constexpr const T& t() const {
+        return y;
+    }
+    [[nodiscard]] constexpr const T& q() const {
+        return z;
+    }
+
+// swizzlers - create a subvector of specific components
+// e.g. Vec2 uv() { return Vec2(x,y); }
+// _DEFINE_SWIZZLER2 defines a single such function, DEFINE_SWIZZLER2 defines all of them for all
+// component names (x<->r) and permutations (xy<->yx)
+#define _DEFINE_SWIZZLER2(a, b, name)                                                              \
+    [[nodiscard]] constexpr Vec2<T> name() const { return Vec2<T>(a, b); }
+#define DEFINE_SWIZZLER2(a, b, a2, b2, a3, b3, a4, b4)                                             \
+    _DEFINE_SWIZZLER2(a, b, a##b);                                                                 \
+    _DEFINE_SWIZZLER2(a, b, a2##b2);                                                               \
+    _DEFINE_SWIZZLER2(a, b, a3##b3);                                                               \
+    _DEFINE_SWIZZLER2(a, b, a4##b4);                                                               \
+    _DEFINE_SWIZZLER2(b, a, b##a);                                                                 \
+    _DEFINE_SWIZZLER2(b, a, b2##a2);                                                               \
+    _DEFINE_SWIZZLER2(b, a, b3##a3);                                                               \
+    _DEFINE_SWIZZLER2(b, a, b4##a4)
+
+    DEFINE_SWIZZLER2(x, y, r, g, u, v, s, t);
+    DEFINE_SWIZZLER2(x, z, r, b, u, w, s, q);
+    DEFINE_SWIZZLER2(y, z, g, b, v, w, t, q);
+#undef DEFINE_SWIZZLER2
+#undef _DEFINE_SWIZZLER2
+};
+
+template <typename T, typename V>
+[[nodiscard]] constexpr Vec3<T> operator*(const V& f, const Vec3<T>& vec) {
+    using C = std::common_type_t<T, V>;
+
+    return Vec3<T>(static_cast<T>(static_cast<C>(f) * static_cast<C>(vec.x)),
+                   static_cast<T>(static_cast<C>(f) * static_cast<C>(vec.y)),
+                   static_cast<T>(static_cast<C>(f) * static_cast<C>(vec.z)));
+}
+
+template <>
+inline float Vec3<float>::Length() const {
+    return std::sqrt(x * x + y * y + z * z);
+}
+
+template <>
+inline Vec3<float> Vec3<float>::Normalized() const {
+    return *this / Length();
+}
+
+template <>
+inline float Vec3<float>::Normalize() {
+    float length = Length();
+    *this /= length;
+    return length;
+}
+
+using Vec3f = Vec3<float>;
+
+template <typename T>
+class Vec4 {
+public:
+    T x{};
+    T y{};
+    T z{};
+    T w{};
+
+    constexpr Vec4() = default;
+    constexpr Vec4(const T& x_, const T& y_, const T& z_, const T& w_)
+        : x(x_), y(y_), z(z_), w(w_) {}
+
+    template <typename T2>
+    [[nodiscard]] constexpr Vec4<T2> Cast() const {
+        return Vec4<T2>(static_cast<T2>(x), static_cast<T2>(y), static_cast<T2>(z),
+                        static_cast<T2>(w));
+    }
+
+    [[nodiscard]] static constexpr Vec4 AssignToAll(const T& f) {
+        return Vec4(f, f, f, f);
+    }
+
+    [[nodiscard]] constexpr Vec4<decltype(T{} + T{})> operator+(const Vec4& other) const {
+        return {x + other.x, y + other.y, z + other.z, w + other.w};
+    }
+
+    constexpr Vec4& operator+=(const Vec4& other) {
+        x += other.x;
+        y += other.y;
+        z += other.z;
+        w += other.w;
+        return *this;
+    }
+
+    [[nodiscard]] constexpr Vec4<decltype(T{} - T{})> operator-(const Vec4& other) const {
+        return {x - other.x, y - other.y, z - other.z, w - other.w};
+    }
+
+    constexpr Vec4& operator-=(const Vec4& other) {
+        x -= other.x;
+        y -= other.y;
+        z -= other.z;
+        w -= other.w;
+        return *this;
+    }
+
+    template <typename U = T>
+    [[nodiscard]] constexpr Vec4<std::enable_if_t<std::is_signed_v<U>, U>> operator-() const {
+        return {-x, -y, -z, -w};
+    }
+
+    [[nodiscard]] constexpr Vec4<decltype(T{} * T{})> operator*(const Vec4& other) const {
+        return {x * other.x, y * other.y, z * other.z, w * other.w};
+    }
+
+    template <typename V>
+    [[nodiscard]] constexpr Vec4<decltype(T{} * V{})> operator*(const V& f) const {
+        using TV = decltype(T{} * V{});
+        using C = std::common_type_t<T, V>;
+
+        return {
+            static_cast<TV>(static_cast<C>(x) * static_cast<C>(f)),
+            static_cast<TV>(static_cast<C>(y) * static_cast<C>(f)),
+            static_cast<TV>(static_cast<C>(z) * static_cast<C>(f)),
+            static_cast<TV>(static_cast<C>(w) * static_cast<C>(f)),
+        };
+    }
+
+    template <typename V>
+    constexpr Vec4& operator*=(const V& f) {
+        *this = *this * f;
+        return *this;
+    }
+
+    template <typename V>
+    [[nodiscard]] constexpr Vec4<decltype(T{} / V{})> operator/(const V& f) const {
+        using TV = decltype(T{} / V{});
+        using C = std::common_type_t<T, V>;
+
+        return {
+            static_cast<TV>(static_cast<C>(x) / static_cast<C>(f)),
+            static_cast<TV>(static_cast<C>(y) / static_cast<C>(f)),
+            static_cast<TV>(static_cast<C>(z) / static_cast<C>(f)),
+            static_cast<TV>(static_cast<C>(w) / static_cast<C>(f)),
+        };
+    }
+
+    template <typename V>
+    constexpr Vec4& operator/=(const V& f) {
+        *this = *this / f;
+        return *this;
+    }
+
+    [[nodiscard]] constexpr T Length2() const {
+        return x * x + y * y + z * z + w * w;
+    }
+
+    [[nodiscard]] constexpr T& operator[](std::size_t i) {
+        return *((&x) + i);
+    }
+
+    [[nodiscard]] constexpr const T& operator[](std::size_t i) const {
+        return *((&x) + i);
+    }
+
+    constexpr void SetZero() {
+        x = 0;
+        y = 0;
+        z = 0;
+        w = 0;
+    }
+
+    // Common alias: RGBA (colors)
+    [[nodiscard]] constexpr T& r() {
+        return x;
+    }
+    [[nodiscard]] constexpr T& g() {
+        return y;
+    }
+    [[nodiscard]] constexpr T& b() {
+        return z;
+    }
+    [[nodiscard]] constexpr T& a() {
+        return w;
+    }
+
+    [[nodiscard]] constexpr const T& r() const {
+        return x;
+    }
+    [[nodiscard]] constexpr const T& g() const {
+        return y;
+    }
+    [[nodiscard]] constexpr const T& b() const {
+        return z;
+    }
+    [[nodiscard]] constexpr const T& a() const {
+        return w;
+    }
+
+// Swizzlers - Create a subvector of specific components
+// e.g. Vec2 uv() { return Vec2(x,y); }
+
+// _DEFINE_SWIZZLER2 defines a single such function
+// DEFINE_SWIZZLER2_COMP1 defines one-component functions for all component names (x<->r)
+// DEFINE_SWIZZLER2_COMP2 defines two component functions for all component names (x<->r) and
+// permutations (xy<->yx)
+#define _DEFINE_SWIZZLER2(a, b, name)                                                              \
+    [[nodiscard]] constexpr Vec2<T> name() const { return Vec2<T>(a, b); }
+#define DEFINE_SWIZZLER2_COMP1(a, a2)                                                              \
+    _DEFINE_SWIZZLER2(a, a, a##a);                                                                 \
+    _DEFINE_SWIZZLER2(a, a, a2##a2)
+#define DEFINE_SWIZZLER2_COMP2(a, b, a2, b2)                                                       \
+    _DEFINE_SWIZZLER2(a, b, a##b);                                                                 \
+    _DEFINE_SWIZZLER2(a, b, a2##b2);                                                               \
+    _DEFINE_SWIZZLER2(b, a, b##a);                                                                 \
+    _DEFINE_SWIZZLER2(b, a, b2##a2)
+
+    DEFINE_SWIZZLER2_COMP2(x, y, r, g);
+    DEFINE_SWIZZLER2_COMP2(x, z, r, b);
+    DEFINE_SWIZZLER2_COMP2(x, w, r, a);
+    DEFINE_SWIZZLER2_COMP2(y, z, g, b);
+    DEFINE_SWIZZLER2_COMP2(y, w, g, a);
+    DEFINE_SWIZZLER2_COMP2(z, w, b, a);
+    DEFINE_SWIZZLER2_COMP1(x, r);
+    DEFINE_SWIZZLER2_COMP1(y, g);
+    DEFINE_SWIZZLER2_COMP1(z, b);
+    DEFINE_SWIZZLER2_COMP1(w, a);
+#undef DEFINE_SWIZZLER2_COMP1
+#undef DEFINE_SWIZZLER2_COMP2
+#undef _DEFINE_SWIZZLER2
+
+#define _DEFINE_SWIZZLER3(a, b, c, name)                                                           \
+    [[nodiscard]] constexpr Vec3<T> name() const { return Vec3<T>(a, b, c); }
+#define DEFINE_SWIZZLER3_COMP1(a, a2)                                                              \
+    _DEFINE_SWIZZLER3(a, a, a, a##a##a);                                                           \
+    _DEFINE_SWIZZLER3(a, a, a, a2##a2##a2)
+#define DEFINE_SWIZZLER3_COMP3(a, b, c, a2, b2, c2)                                                \
+    _DEFINE_SWIZZLER3(a, b, c, a##b##c);                                                           \
+    _DEFINE_SWIZZLER3(a, c, b, a##c##b);                                                           \
+    _DEFINE_SWIZZLER3(b, a, c, b##a##c);                                                           \
+    _DEFINE_SWIZZLER3(b, c, a, b##c##a);                                                           \
+    _DEFINE_SWIZZLER3(c, a, b, c##a##b);                                                           \
+    _DEFINE_SWIZZLER3(c, b, a, c##b##a);                                                           \
+    _DEFINE_SWIZZLER3(a, b, c, a2##b2##c2);                                                        \
+    _DEFINE_SWIZZLER3(a, c, b, a2##c2##b2);                                                        \
+    _DEFINE_SWIZZLER3(b, a, c, b2##a2##c2);                                                        \
+    _DEFINE_SWIZZLER3(b, c, a, b2##c2##a2);                                                        \
+    _DEFINE_SWIZZLER3(c, a, b, c2##a2##b2);                                                        \
+    _DEFINE_SWIZZLER3(c, b, a, c2##b2##a2)
+
+    DEFINE_SWIZZLER3_COMP3(x, y, z, r, g, b);
+    DEFINE_SWIZZLER3_COMP3(x, y, w, r, g, a);
+    DEFINE_SWIZZLER3_COMP3(x, z, w, r, b, a);
+    DEFINE_SWIZZLER3_COMP3(y, z, w, g, b, a);
+    DEFINE_SWIZZLER3_COMP1(x, r);
+    DEFINE_SWIZZLER3_COMP1(y, g);
+    DEFINE_SWIZZLER3_COMP1(z, b);
+    DEFINE_SWIZZLER3_COMP1(w, a);
+#undef DEFINE_SWIZZLER3_COMP1
+#undef DEFINE_SWIZZLER3_COMP3
+#undef _DEFINE_SWIZZLER3
+};
+
+template <typename T, typename V>
+[[nodiscard]] constexpr Vec4<decltype(V{} * T{})> operator*(const V& f, const Vec4<T>& vec) {
+    using TV = decltype(V{} * T{});
+    using C = std::common_type_t<T, V>;
+
+    return {
+        static_cast<TV>(static_cast<C>(f) * static_cast<C>(vec.x)),
+        static_cast<TV>(static_cast<C>(f) * static_cast<C>(vec.y)),
+        static_cast<TV>(static_cast<C>(f) * static_cast<C>(vec.z)),
+        static_cast<TV>(static_cast<C>(f) * static_cast<C>(vec.w)),
+    };
+}
+
+using Vec4f = Vec4<float>;
+
+template <typename T>
+constexpr decltype(T{} * T{} + T{} * T{}) Dot(const Vec2<T>& a, const Vec2<T>& b) {
+    return a.x * b.x + a.y * b.y;
+}
+
+template <typename T>
+[[nodiscard]] constexpr decltype(T{} * T{} + T{} * T{}) Dot(const Vec3<T>& a, const Vec3<T>& b) {
+    return a.x * b.x + a.y * b.y + a.z * b.z;
+}
+
+template <typename T>
+[[nodiscard]] constexpr decltype(T{} * T{} + T{} * T{}) Dot(const Vec4<T>& a, const Vec4<T>& b) {
+    return a.x * b.x + a.y * b.y + a.z * b.z + a.w * b.w;
+}
+
+template <>
+[[nodiscard]] inline float Dot(const Vec4<float>& a, const Vec4<float>& b) {
+#ifdef __ARM_NEON
+    float32x4_t va = vld1q_f32(&a.x);
+    float32x4_t vb = vld1q_f32(&b.x);
+    float32x4_t result = vmulq_f32(va, vb);
+#if defined(__aarch64__) // Use vaddvq_f32 in ARMv8 architectures
+    return vaddvq_f32(result);
+#else // Use manual addition for older architectures
+    float32x2_t sum2 = vadd_f32(vget_high_f32(result), vget_low_f32(result));
+    return vget_lane_f32(vpadd_f32(sum2, sum2), 0);
+#endif
+#else
+    return a.x * b.x + a.y * b.y + a.z * b.z + a.w * b.w;
+#endif
+}
+
+template <typename T>
+[[nodiscard]] constexpr Vec3<decltype(T{} * T{} - T{} * T{})> Cross(const Vec3<T>& a,
+                                                                    const Vec3<T>& b) {
+    return {a.y * b.z - a.z * b.y, a.z * b.x - a.x * b.z, a.x * b.y - a.y * b.x};
+}
+
+// linear interpolation via float: 0.0=begin, 1.0=end
+template <typename X>
+[[nodiscard]] constexpr decltype(X{} * float{} + X{} * float{}) Lerp(const X& begin, const X& end,
+                                                                     const float t) {
+    return begin * (1.f - t) + end * t;
+}
+
+// linear interpolation via int: 0=begin, base=end
+template <typename X, int base>
+[[nodiscard]] constexpr decltype((X{} * int{} + X{} * int{}) / base) LerpInt(const X& begin,
+                                                                             const X& end,
+                                                                             const int t) {
+    return (begin * (base - t) + end * t) / base;
+}
+
+// bilinear interpolation. s is for interpolating x00-x01 and x10-x11, and t is for the second
+// interpolation.
+template <typename X>
+[[nodiscard]] constexpr auto BilinearInterp(const X& x00, const X& x01, const X& x10, const X& x11,
+                                            const float s, const float t) {
+    auto y0 = Lerp(x00, x01, s);
+    auto y1 = Lerp(x10, x11, s);
+    return Lerp(y0, y1, t);
+}
+
+// Utility vector factories
+template <typename T>
+[[nodiscard]] constexpr Vec2<T> MakeVec(const T& x, const T& y) {
+    return Vec2<T>{x, y};
+}
+
+template <typename T>
+[[nodiscard]] constexpr Vec3<T> MakeVec(const T& x, const T& y, const T& z) {
+    return Vec3<T>{x, y, z};
+}
+
+template <typename T>
+[[nodiscard]] constexpr Vec4<T> MakeVec(const T& x, const T& y, const Vec2<T>& zw) {
+    return MakeVec(x, y, zw[0], zw[1]);
+}
+
+template <typename T>
+[[nodiscard]] constexpr Vec3<T> MakeVec(const Vec2<T>& xy, const T& z) {
+    return MakeVec(xy[0], xy[1], z);
+}
+
+template <typename T>
+[[nodiscard]] constexpr Vec3<T> MakeVec(const T& x, const Vec2<T>& yz) {
+    return MakeVec(x, yz[0], yz[1]);
+}
+
+template <typename T>
+[[nodiscard]] constexpr Vec4<T> MakeVec(const T& x, const T& y, const T& z, const T& w) {
+    return Vec4<T>{x, y, z, w};
+}
+
+template <typename T>
+[[nodiscard]] constexpr Vec4<T> MakeVec(const Vec2<T>& xy, const T& z, const T& w) {
+    return MakeVec(xy[0], xy[1], z, w);
+}
+
+template <typename T>
+[[nodiscard]] constexpr Vec4<T> MakeVec(const T& x, const Vec2<T>& yz, const T& w) {
+    return MakeVec(x, yz[0], yz[1], w);
+}
+
+// NOTE: This has priority over "Vec2<Vec2<T>> MakeVec(const Vec2<T>& x, const Vec2<T>& y)".
+//       Even if someone wanted to use an odd object like Vec2<Vec2<T>>, the compiler would error
+//       out soon enough due to misuse of the returned structure.
+template <typename T>
+[[nodiscard]] constexpr Vec4<T> MakeVec(const Vec2<T>& xy, const Vec2<T>& zw) {
+    return MakeVec(xy[0], xy[1], zw[0], zw[1]);
+}
+
+template <typename T>
+[[nodiscard]] constexpr Vec4<T> MakeVec(const Vec3<T>& xyz, const T& w) {
+    return MakeVec(xyz[0], xyz[1], xyz[2], w);
+}
+
+template <typename T>
+[[nodiscard]] constexpr Vec4<T> MakeVec(const T& x, const Vec3<T>& yzw) {
+    return MakeVec(x, yzw[0], yzw[1], yzw[2]);
 }
 
 } // namespace Common

src/core/hle/service/set/setting_formats/device_settings.h

@@ -1,6 +1,3 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
-
 // SPDX-FileCopyrightText: Copyright 2018 yuzu Emulator Project
 // SPDX-License-Identifier: GPL-2.0-or-later
 
@@ -33,15 +30,15 @@ struct DeviceSettings {
     INSERT_PADDING_BYTES(0x20); // Reserved
 
     // nn::settings::system::ConsoleSixAxisSensorAccelerationBias
-    Common::Vec<f32, 3> console_six_axis_sensor_acceleration_bias;
+    Common::Vec3<f32> console_six_axis_sensor_acceleration_bias;
     // nn::settings::system::ConsoleSixAxisSensorAngularVelocityBias
-    Common::Vec<f32, 3> console_six_axis_sensor_angular_velocity_bias;
+    Common::Vec3<f32> console_six_axis_sensor_angular_velocity_bias;
     // nn::settings::system::ConsoleSixAxisSensorAccelerationGain
     std::array<u8, 0x24> console_six_axis_sensor_acceleration_gain;
     // nn::settings::system::ConsoleSixAxisSensorAngularVelocityGain
     std::array<u8, 0x24> console_six_axis_sensor_angular_velocity_gain;
     // nn::settings::system::ConsoleSixAxisSensorAngularVelocityTimeBias
-    Common::Vec<f32, 3> console_six_axis_sensor_angular_velocity_time_bias;
+    Common::Vec3<f32> console_six_axis_sensor_angular_velocity_time_bias;
     // nn::settings::system::ConsoleSixAxisSensorAngularAcceleration
     std::array<u8, 0x24> console_six_axis_sensor_angular_acceleration;
 };

src/core/hle/service/set/setting_formats/system_settings.h

@@ -1,4 +1,4 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
+// SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
 // SPDX-License-Identifier: GPL-3.0-or-later
 
 // SPDX-FileCopyrightText: Copyright 2018 yuzu Emulator Project
@@ -153,15 +153,15 @@ struct SystemSettings {
     INSERT_PADDING_BYTES(0x7FF8); // Reserved
 
     // nn::settings::system::ConsoleSixAxisSensorAccelerationBias
-    Common::Vec<f32, 3> console_six_axis_sensor_acceleration_bias;
+    Common::Vec3<f32> console_six_axis_sensor_acceleration_bias;
     // nn::settings::system::ConsoleSixAxisSensorAngularVelocityBias
-    Common::Vec<f32, 3> console_six_axis_sensor_angular_velocity_bias;
+    Common::Vec3<f32> console_six_axis_sensor_angular_velocity_bias;
     // nn::settings::system::ConsoleSixAxisSensorAccelerationGain
     std::array<u8, 0x24> console_six_axis_sensor_acceleration_gain;
     // nn::settings::system::ConsoleSixAxisSensorAngularVelocityGain
     std::array<u8, 0x24> console_six_axis_sensor_angular_velocity_gain;
     // nn::settings::system::ConsoleSixAxisSensorAngularVelocityTimeBias
-    Common::Vec<f32, 3> console_six_axis_sensor_angular_velocity_time_bias;
+    Common::Vec3<f32> console_six_axis_sensor_angular_velocity_time_bias;
     // nn::settings::system::ConsoleSixAxisSensorAngularAcceleration
     std::array<u8, 0x24> console_six_axis_sensor_angular_velocity_acceleration;
     INSERT_PADDING_BYTES(0x70); // Reserved

src/hid_core/frontend/emulated_console.cpp

@@ -170,12 +170,12 @@ void EmulatedConsole::SetMotion(const Common::Input::CallbackStatus& callback) {
     auto& emulated = console.motion_values.emulated;
 
     raw_status = TransformToMotion(callback);
-    emulated.SetAcceleration(Common::Vec<f32, 3>{
+    emulated.SetAcceleration(Common::Vec3f{
         raw_status.accel.x.value,
         raw_status.accel.y.value,
         raw_status.accel.z.value,
     });
-    emulated.SetGyroscope(Common::Vec<f32, 3>{
+    emulated.SetGyroscope(Common::Vec3f{
         raw_status.gyro.x.value,
         raw_status.gyro.y.value,
         raw_status.gyro.z.value,

src/hid_core/frontend/emulated_console.h

@@ -18,6 +18,7 @@
 #include "common/input.h"
 #include "common/param_package.h"
 #include "common/point.h"
+#include "common/quaternion.h"
 #include "common/vector_math.h"
 #include "hid_core/frontend/motion_input.h"
 #include "hid_core/hid_types.h"
@@ -42,12 +43,12 @@ using TouchValues = std::array<Common::Input::TouchStatus, MaxTouchDevices>;
 
 // Contains all motion related data that is used on the services
 struct ConsoleMotion {
-    Common::Vec<f32, 3> accel{};
-    Common::Vec<f32, 3> gyro{};
-    Common::Vec<f32, 3> rotation{};
-    std::array<Common::Vec<f32, 3>, 3> orientation{};
-    Common::Vec<f32, 4> quaternion{};
-    Common::Vec<f32, 3> gyro_bias{};
+    Common::Vec3f accel{};
+    Common::Vec3f gyro{};
+    Common::Vec3f rotation{};
+    std::array<Common::Vec3f, 3> orientation{};
+    Common::Quaternion<f32> quaternion{};
+    Common::Vec3f gyro_bias{};
     f32 verticalization_error{};
     bool is_at_rest{};
 };

src/hid_core/frontend/emulated_controller.cpp

@@ -1051,12 +1051,12 @@ void EmulatedController::SetMotion(const Common::Input::CallbackStatus& callback
     auto& emulated = controller.motion_values[index].emulated;
 
     raw_status = TransformToMotion(callback);
-    emulated.SetAcceleration(Common::Vec<f32, 3>{
+    emulated.SetAcceleration(Common::Vec3f{
         raw_status.accel.x.value,
         raw_status.accel.y.value,
         raw_status.accel.z.value,
     });
-    emulated.SetGyroscope(Common::Vec<f32, 3>{
+    emulated.SetGyroscope(Common::Vec3f{
         raw_status.gyro.x.value,
         raw_status.gyro.y.value,
         raw_status.gyro.z.value,

src/hid_core/frontend/emulated_controller.h

@@ -107,11 +107,11 @@ struct RingSensorForce {
 using NfcState = Common::Input::NfcStatus;
 
 struct ControllerMotion {
-    Common::Vec<f32, 3> accel{};
-    Common::Vec<f32, 3> gyro{};
-    Common::Vec<f32, 3> rotation{};
-    Common::Vec<f32, 3> euler{};
-    std::array<Common::Vec<f32, 3>, 3> orientation{};
+    Common::Vec3f accel{};
+    Common::Vec3f gyro{};
+    Common::Vec3f rotation{};
+    Common::Vec3f euler{};
+    std::array<Common::Vec3f, 3> orientation{};
     bool is_at_rest{};
 };
 

src/hid_core/frontend/motion_input.cpp

@@ -26,19 +26,20 @@ void MotionInput::SetPID(f32 new_kp, f32 new_ki, f32 new_kd) {
     kd = new_kd;
 }
 
-void MotionInput::SetAcceleration(const Common::Vec<f32, 3>& acceleration) {
+void MotionInput::SetAcceleration(const Common::Vec3f& acceleration) {
     accel = acceleration;
-    accel[0] = std::clamp(accel[0], -AccelMaxValue, AccelMaxValue);
-    accel[1] = std::clamp(accel[1], -AccelMaxValue, AccelMaxValue);
-    accel[2] = std::clamp(accel[2], -AccelMaxValue, AccelMaxValue);
+
+    accel.x = std::clamp(accel.x, -AccelMaxValue, AccelMaxValue);
+    accel.y = std::clamp(accel.y, -AccelMaxValue, AccelMaxValue);
+    accel.z = std::clamp(accel.z, -AccelMaxValue, AccelMaxValue);
 }
 
-void MotionInput::SetGyroscope(const Common::Vec<f32, 3>& gyroscope) {
+void MotionInput::SetGyroscope(const Common::Vec3f& gyroscope) {
     gyro = gyroscope - gyro_bias;
 
-    gyro[0] = std::clamp(gyro[0], -GyroMaxValue, GyroMaxValue);
-    gyro[1] = std::clamp(gyro[1], -GyroMaxValue, GyroMaxValue);
-    gyro[2] = std::clamp(gyro[2], -GyroMaxValue, GyroMaxValue);
+    gyro.x = std::clamp(gyro.x, -GyroMaxValue, GyroMaxValue);
+    gyro.y = std::clamp(gyro.y, -GyroMaxValue, GyroMaxValue);
+    gyro.z = std::clamp(gyro.z, -GyroMaxValue, GyroMaxValue);
 
     // Auto adjust gyro_bias to minimize drift
     if (!IsMoving(IsAtRestRelaxed)) {
@@ -58,25 +59,25 @@ void MotionInput::SetGyroscope(const Common::Vec<f32, 3>& gyroscope) {
     }
 }
 
-void MotionInput::SetQuaternion(const Common::Vec<f32, 4>& quaternion) {
+void MotionInput::SetQuaternion(const Common::Quaternion<f32>& quaternion) {
     quat = quaternion;
 }
 
-void MotionInput::SetEulerAngles(const Common::Vec<f32, 3>& euler_angles) {
-    const float cr = std::cos(euler_angles[0] * 0.5f);
-    const float sr = std::sin(euler_angles[0] * 0.5f);
-    const float cp = std::cos(euler_angles[1] * 0.5f);
-    const float sp = std::sin(euler_angles[1] * 0.5f);
-    const float cy = std::cos(euler_angles[2] * 0.5f);
-    const float sy = std::sin(euler_angles[2] * 0.5f);
+void MotionInput::SetEulerAngles(const Common::Vec3f& euler_angles) {
+    const float cr = std::cos(euler_angles.x * 0.5f);
+    const float sr = std::sin(euler_angles.x * 0.5f);
+    const float cp = std::cos(euler_angles.y * 0.5f);
+    const float sp = std::sin(euler_angles.y * 0.5f);
+    const float cy = std::cos(euler_angles.z * 0.5f);
+    const float sy = std::sin(euler_angles.z * 0.5f);
 
-    quat[3] = cr * cp * cy + sr * sp * sy;
-    quat[0] = sr * cp * cy - cr * sp * sy;
-    quat[1] = cr * sp * cy + sr * cp * sy;
-    quat[2] = cr * cp * sy - sr * sp * cy;
+    quat.w = cr * cp * cy + sr * sp * sy;
+    quat.xyz.x = sr * cp * cy - cr * sp * sy;
+    quat.xyz.y = cr * sp * cy + sr * cp * sy;
+    quat.xyz.z = cr * cp * sy - sr * sp * cy;
 }
 
-void MotionInput::SetGyroBias(const Common::Vec<f32, 3>& bias) {
+void MotionInput::SetGyroBias(const Common::Vec3f& bias) {
     gyro_bias = bias;
 }
 
@@ -97,7 +98,7 @@ void MotionInput::ResetRotations() {
 }
 
 void MotionInput::ResetQuaternion() {
-    quat = Common::Vec<f32, 4>{0.0f, 0.0f, -1.0f, 0.0f};
+    quat = {{0.0f, 0.0f, -1.0f}, 0.0f};
 }
 
 bool MotionInput::IsMoving(f32 sensitivity) const {
@@ -136,10 +137,10 @@ void MotionInput::UpdateOrientation(u64 elapsed_time) {
         ResetOrientation();
     }
     // Short name local variable for readability
-    f32 q1 = quat[3];
-    f32 q2 = quat[0];
-    f32 q3 = quat[1];
-    f32 q4 = quat[2];
+    f32 q1 = quat.w;
+    f32 q2 = quat.xyz[0];
+    f32 q3 = quat.xyz[1];
+    f32 q4 = quat.xyz[2];
     const auto sample_period = static_cast<f32>(elapsed_time) / 1000000.0f;
 
     // Ignore invalid elapsed time
@@ -149,23 +150,23 @@ void MotionInput::UpdateOrientation(u64 elapsed_time) {
 
     const auto normal_accel = accel.Normalized();
     auto rad_gyro = gyro * std::numbers::pi_v<float> * 2.f;
-    const f32 swap = rad_gyro[0];
-    rad_gyro[0] = rad_gyro[1];
-    rad_gyro[1] = -swap;
-    rad_gyro[2] = -rad_gyro[2];
+    const f32 swap = rad_gyro.x;
+    rad_gyro.x = rad_gyro.y;
+    rad_gyro.y = -swap;
+    rad_gyro.z = -rad_gyro.z;
 
     // Clear gyro values if there is no gyro present
     if (only_accelerometer) {
-        rad_gyro[0] = 0;
-        rad_gyro[1] = 0;
-        rad_gyro[2] = 0;
+        rad_gyro.x = 0;
+        rad_gyro.y = 0;
+        rad_gyro.z = 0;
     }
 
     // Ignore drift correction if acceleration is not reliable
     if (accel.Length() >= 0.75f && accel.Length() <= 1.25f) {
-        const f32 ax = -normal_accel[0];
-        const f32 ay = normal_accel[1];
-        const f32 az = -normal_accel[2];
+        const f32 ax = -normal_accel.x;
+        const f32 ay = normal_accel.y;
+        const f32 az = -normal_accel.z;
 
         // Estimated direction of gravity
         const f32 vx = 2.0f * (q2 * q4 - q1 * q3);
@@ -173,7 +174,7 @@ void MotionInput::UpdateOrientation(u64 elapsed_time) {
         const f32 vz = q1 * q1 - q2 * q2 - q3 * q3 + q4 * q4;
 
         // Error is cross product between estimated direction and measured direction of gravity
-        const Common::Vec<f32, 3> new_real_error{
+        const Common::Vec3f new_real_error = {
             az * vx - ax * vz,
             ay * vz - az * vy,
             ax * vy - ay * vx,
@@ -201,16 +202,16 @@ void MotionInput::UpdateOrientation(u64 elapsed_time) {
             rad_gyro += 10.0f * kd * derivative_error;
 
             // Emulate gyro values for games that need them
-            gyro[0] = -rad_gyro[1];
-            gyro[1] = rad_gyro[0];
-            gyro[2] = -rad_gyro[2];
+            gyro.x = -rad_gyro.y;
+            gyro.y = rad_gyro.x;
+            gyro.z = -rad_gyro.z;
             UpdateRotation(elapsed_time);
         }
     }
 
-    const f32 gx = rad_gyro[1];
-    const f32 gy = rad_gyro[0];
-    const f32 gz = rad_gyro[2];
+    const f32 gx = rad_gyro.y;
+    const f32 gy = rad_gyro.x;
+    const f32 gz = rad_gyro.z;
 
     // Integrate rate of change of quaternion
     const f32 pa = q2;
@@ -221,58 +222,57 @@ void MotionInput::UpdateOrientation(u64 elapsed_time) {
     q3 = pb + (q1 * gy - pa * gz + pc * gx) * (0.5f * sample_period);
     q4 = pc + (q1 * gz + pa * gy - pb * gx) * (0.5f * sample_period);
 
-    quat[3] = q1;
-    quat[0] = q2;
-    quat[1] = q3;
-    quat[2] = q4;
+    quat.w = q1;
+    quat.xyz[0] = q2;
+    quat.xyz[1] = q3;
+    quat.xyz[2] = q4;
     quat = quat.Normalized();
 }
 
-std::array<Common::Vec<f32, 3>, 3> MotionInput::GetOrientation() const {
-    const Common::Vec<f32, 4> quad{
-        -quat[1],
-        -quat[0],
-        -quat[3],
-        -quat[2],
+std::array<Common::Vec3f, 3> MotionInput::GetOrientation() const {
+    const Common::Quaternion<float> quad{
+        .xyz = {-quat.xyz[1], -quat.xyz[0], -quat.w},
+        .w = -quat.xyz[2],
     };
-    const std::array<f32, 16> matrix4x4 = quad.ToMatrix();
-    return {Common::Vec<f32, 3>(matrix4x4[0], matrix4x4[1], -matrix4x4[2]),
-            Common::Vec<f32, 3>(matrix4x4[4], matrix4x4[5], -matrix4x4[6]),
-            Common::Vec<f32, 3>(-matrix4x4[8], -matrix4x4[9], matrix4x4[10])};
+    const std::array<float, 16> matrix4x4 = quad.ToMatrix();
+
+    return {Common::Vec3f(matrix4x4[0], matrix4x4[1], -matrix4x4[2]),
+            Common::Vec3f(matrix4x4[4], matrix4x4[5], -matrix4x4[6]),
+            Common::Vec3f(-matrix4x4[8], -matrix4x4[9], matrix4x4[10])};
 }
 
-Common::Vec<f32, 3> MotionInput::GetAcceleration() const {
+Common::Vec3f MotionInput::GetAcceleration() const {
     return accel;
 }
 
-Common::Vec<f32, 3> MotionInput::GetGyroscope() const {
+Common::Vec3f MotionInput::GetGyroscope() const {
     return gyro;
 }
 
-Common::Vec<f32, 3> MotionInput::GetGyroBias() const {
+Common::Vec3f MotionInput::GetGyroBias() const {
     return gyro_bias;
 }
 
-Common::Vec<f32, 4> MotionInput::GetQuaternion() const {
+Common::Quaternion<f32> MotionInput::GetQuaternion() const {
     return quat;
 }
 
-Common::Vec<f32, 3> MotionInput::GetRotations() const {
+Common::Vec3f MotionInput::GetRotations() const {
     return rotations;
 }
 
-Common::Vec<f32, 3> MotionInput::GetEulerAngles() const {
+Common::Vec3f MotionInput::GetEulerAngles() const {
     // roll (x-axis rotation)
-    const float sinr_cosp = 2 * (quat[3] * quat[0] + quat[1] * quat[2]);
-    const float cosr_cosp = 1 - 2 * (quat[0] * quat[0] + quat[1] * quat[1]);
+    const float sinr_cosp = 2 * (quat.w * quat.xyz.x + quat.xyz.y * quat.xyz.z);
+    const float cosr_cosp = 1 - 2 * (quat.xyz.x * quat.xyz.x + quat.xyz.y * quat.xyz.y);
 
     // pitch (y-axis rotation)
-    const float sinp = std::sqrt(1 + 2 * (quat[3] * quat[1] - quat[0] * quat[2]));
-    const float cosp = std::sqrt(1 - 2 * (quat[3] * quat[1] - quat[0] * quat[2]));
+    const float sinp = std::sqrt(1 + 2 * (quat.w * quat.xyz.y - quat.xyz.x * quat.xyz.z));
+    const float cosp = std::sqrt(1 - 2 * (quat.w * quat.xyz.y - quat.xyz.x * quat.xyz.z));
 
     // yaw (z-axis rotation)
-    const float siny_cosp = 2 * (quat[3] * quat[2] + quat[0] * quat[1]);
-    const float cosy_cosp = 1 - 2 * (quat[1] * quat[1] + quat[2] * quat[2]);
+    const float siny_cosp = 2 * (quat.w * quat.xyz.z + quat.xyz.x * quat.xyz.y);
+    const float cosy_cosp = 1 - 2 * (quat.xyz.y * quat.xyz.y + quat.xyz.z * quat.xyz.z);
 
     return {
         std::atan2(sinr_cosp, cosr_cosp),
@@ -285,13 +285,13 @@ void MotionInput::ResetOrientation() {
     if (!reset_enabled || only_accelerometer) {
         return;
     }
-    if (!IsMoving(IsAtRestRelaxed) && accel[2] <= -0.9f) {
+    if (!IsMoving(IsAtRestRelaxed) && accel.z <= -0.9f) {
         ++reset_counter;
         if (reset_counter > 900) {
-            quat[3] = 0;
-            quat[0] = 0;
-            quat[1] = 0;
-            quat[2] = -1;
+            quat.w = 0;
+            quat.xyz[0] = 0;
+            quat.xyz[1] = 0;
+            quat.xyz[2] = -1;
             SetOrientationFromAccelerometer();
             integral_error = {};
             reset_counter = 0;
@@ -309,15 +309,15 @@ void MotionInput::SetOrientationFromAccelerometer() {
 
     while (!IsCalibrated(0.01f) && ++iterations < 100) {
         // Short name local variable for readability
-        f32 q1 = quat[3];
-        f32 q2 = quat[0];
-        f32 q3 = quat[1];
-        f32 q4 = quat[2];
+        f32 q1 = quat.w;
+        f32 q2 = quat.xyz[0];
+        f32 q3 = quat.xyz[1];
+        f32 q4 = quat.xyz[2];
 
-        Common::Vec<f32, 3> rad_gyro;
-        const f32 ax = -normal_accel[0];
-        const f32 ay = normal_accel[1];
-        const f32 az = -normal_accel[2];
+        Common::Vec3f rad_gyro;
+        const f32 ax = -normal_accel.x;
+        const f32 ay = normal_accel.y;
+        const f32 az = -normal_accel.z;
 
         // Estimated direction of gravity
         const f32 vx = 2.0f * (q2 * q4 - q1 * q3);
@@ -325,7 +325,7 @@ void MotionInput::SetOrientationFromAccelerometer() {
         const f32 vz = q1 * q1 - q2 * q2 - q3 * q3 + q4 * q4;
 
         // Error is cross product between estimated direction and measured direction of gravity
-        const Common::Vec<f32, 3> new_real_error = {
+        const Common::Vec3f new_real_error = {
             az * vx - ax * vz,
             ay * vz - az * vy,
             ax * vy - ay * vx,
@@ -338,9 +338,9 @@ void MotionInput::SetOrientationFromAccelerometer() {
         rad_gyro += 5.0f * ki * integral_error;
         rad_gyro += 10.0f * kd * derivative_error;
 
-        const f32 gx = rad_gyro[1];
-        const f32 gy = rad_gyro[0];
-        const f32 gz = rad_gyro[2];
+        const f32 gx = rad_gyro.y;
+        const f32 gy = rad_gyro.x;
+        const f32 gz = rad_gyro.z;
 
         // Integrate rate of change of quaternion
         const f32 pa = q2;
@@ -351,10 +351,10 @@ void MotionInput::SetOrientationFromAccelerometer() {
         q3 = pb + (q1 * gy - pa * gz + pc * gx) * (0.5f * sample_period);
         q4 = pc + (q1 * gz + pa * gy - pb * gx) * (0.5f * sample_period);
 
-        quat[3] = q1;
-        quat[0] = q2;
-        quat[1] = q3;
-        quat[2] = q4;
+        quat.w = q1;
+        quat.xyz[0] = q2;
+        quat.xyz[1] = q3;
+        quat.xyz[2] = q4;
         quat = quat.Normalized();
     }
 }

src/hid_core/frontend/motion_input.h

@@ -1,12 +1,10 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
-
 // SPDX-FileCopyrightText: Copyright 2020 yuzu Emulator Project
 // SPDX-License-Identifier: GPL-2.0-or-later
 
 #pragma once
 
 #include "common/common_types.h"
+#include "common/quaternion.h"
 #include "common/vector_math.h"
 
 namespace Core::HID {
@@ -36,11 +34,11 @@ public:
     MotionInput& operator=(MotionInput&&) = default;
 
     void SetPID(f32 new_kp, f32 new_ki, f32 new_kd);
-    void SetAcceleration(const Common::Vec<f32, 3>& acceleration);
-    void SetGyroscope(const Common::Vec<f32, 3>& gyroscope);
-    void SetQuaternion(const Common::Vec<f32, 4>& quaternion);
-    void SetEulerAngles(const Common::Vec<f32, 3>& euler_angles);
-    void SetGyroBias(const Common::Vec<f32, 3>& bias);
+    void SetAcceleration(const Common::Vec3f& acceleration);
+    void SetGyroscope(const Common::Vec3f& gyroscope);
+    void SetQuaternion(const Common::Quaternion<f32>& quaternion);
+    void SetEulerAngles(const Common::Vec3f& euler_angles);
+    void SetGyroBias(const Common::Vec3f& bias);
     void SetGyroThreshold(f32 threshold);
 
     /// Applies a modifier on top of the normal gyro threshold
@@ -55,13 +53,13 @@ public:
 
     void Calibrate();
 
-    [[nodiscard]] std::array<Common::Vec<f32, 3>, 3> GetOrientation() const;
-    [[nodiscard]] Common::Vec<f32, 3> GetAcceleration() const;
-    [[nodiscard]] Common::Vec<f32, 3> GetGyroscope() const;
-    [[nodiscard]] Common::Vec<f32, 3> GetGyroBias() const;
-    [[nodiscard]] Common::Vec<f32, 3> GetRotations() const;
-    [[nodiscard]] Common::Vec<f32, 4> GetQuaternion() const;
-    [[nodiscard]] Common::Vec<f32, 3> GetEulerAngles() const;
+    [[nodiscard]] std::array<Common::Vec3f, 3> GetOrientation() const;
+    [[nodiscard]] Common::Vec3f GetAcceleration() const;
+    [[nodiscard]] Common::Vec3f GetGyroscope() const;
+    [[nodiscard]] Common::Vec3f GetGyroBias() const;
+    [[nodiscard]] Common::Vec3f GetRotations() const;
+    [[nodiscard]] Common::Quaternion<f32> GetQuaternion() const;
+    [[nodiscard]] Common::Vec3f GetEulerAngles() const;
 
     [[nodiscard]] bool IsMoving(f32 sensitivity) const;
     [[nodiscard]] bool IsCalibrated(f32 sensitivity) const;
@@ -77,24 +75,24 @@ private:
     f32 kd;
 
     // PID errors
-    Common::Vec<f32, 3> real_error;
-    Common::Vec<f32, 3> integral_error;
-    Common::Vec<f32, 3> derivative_error;
+    Common::Vec3f real_error;
+    Common::Vec3f integral_error;
+    Common::Vec3f derivative_error;
 
     // Quaternion containing the device orientation
-    Common::Vec<f32, 4> quat;
+    Common::Quaternion<f32> quat;
 
     // Number of full rotations in each axis
-    Common::Vec<f32, 3> rotations;
+    Common::Vec3f rotations;
 
     // Acceleration vector measurement in G force
-    Common::Vec<f32, 3> accel;
+    Common::Vec3f accel;
 
     // Gyroscope vector measurement in radians/s.
-    Common::Vec<f32, 3> gyro;
+    Common::Vec3f gyro;
 
     // Vector to be subtracted from gyro measurements
-    Common::Vec<f32, 3> gyro_bias;
+    Common::Vec3f gyro_bias;
 
     // Minimum gyro amplitude to detect if the device is moving
     f32 gyro_threshold = 0.0f;

src/hid_core/hid_types.h

@@ -1,6 +1,3 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
-
 // SPDX-FileCopyrightText: Copyright 2021 yuzu Emulator Project
 // SPDX-License-Identifier: GPL-2.0-or-later
 
@@ -605,10 +602,10 @@ static_assert(sizeof(SixAxisSensorAttribute) == 4, "SixAxisSensorAttribute is an
 struct SixAxisSensorState {
     s64 delta_time{};
     s64 sampling_number{};
-    Common::Vec<f32, 3> accel{};
-    Common::Vec<f32, 3> gyro{};
-    Common::Vec<f32, 3> rotation{};
-    std::array<Common::Vec<f32, 3>, 3> orientation{};
+    Common::Vec3f accel{};
+    Common::Vec3f gyro{};
+    Common::Vec3f rotation{};
+    std::array<Common::Vec3f, 3> orientation{};
     SixAxisSensorAttribute attribute{};
     INSERT_PADDING_BYTES(4); // Reserved
 };

src/hid_core/resources/shared_memory_format.h

@@ -1,4 +1,4 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
+// SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
 // SPDX-License-Identifier: GPL-3.0-or-later
 
 // SPDX-FileCopyrightText: Copyright 2023 yuzu Emulator Project
@@ -196,7 +196,7 @@ struct ConsoleSixAxisSensorSharedMemoryFormat {
     bool is_seven_six_axis_sensor_at_rest{};
     INSERT_PADDING_BYTES(3); // padding
     f32 verticalization_error{};
-    Common::Vec<f32, 3> gyro_bias{};
+    Common::Vec3f gyro_bias{};
     INSERT_PADDING_BYTES(4); // padding
 };
 static_assert(sizeof(ConsoleSixAxisSensorSharedMemoryFormat) == 0x20,

src/hid_core/resources/six_axis/seven_six_axis.cpp

@@ -46,11 +46,14 @@ void SevenSixAxis::OnUpdate(const Core::Timing::CoreTiming& core_timing) {
     next_seven_sixaxis_state.accel = motion_status.accel;
     next_seven_sixaxis_state.gyro = motion_status.gyro;
     next_seven_sixaxis_state.quaternion = {
-        motion_status.quaternion[1],
-        motion_status.quaternion[0],
-        -motion_status.quaternion[3],
-        -motion_status.quaternion[2],
+        {
+            motion_status.quaternion.xyz.y,
+            motion_status.quaternion.xyz.x,
+            -motion_status.quaternion.w,
+        },
+        -motion_status.quaternion.xyz.z,
     };
+
     seven_sixaxis_lifo.WriteNextEntry(next_seven_sixaxis_state);
     transfer_memory_owner->GetMemory().WriteBlock(transfer_memory, &seven_sixaxis_lifo,
                                                   sizeof(seven_sixaxis_lifo));

src/hid_core/resources/six_axis/seven_six_axis.h

@@ -7,7 +7,7 @@
 #pragma once
 
 #include "common/common_types.h"
-#include "common/vector_math.h"
+#include "common/quaternion.h"
 #include "common/typed_address.h"
 #include "hid_core/resources/controller_base.h"
 #include "hid_core/resources/ring_lifo.h"
@@ -51,9 +51,9 @@ private:
         u64 timestamp{};
         u64 sampling_number{};
         u64 unknown{};
-        Common::Vec<f32, 3> accel{};
-        Common::Vec<f32, 3> gyro{};
-        Common::Vec<f32, 4> quaternion{};
+        Common::Vec3f accel{};
+        Common::Vec3f gyro{};
+        Common::Quaternion<f32> quaternion{};
     };
     static_assert(sizeof(SevenSixAxisState) == 0x48, "SevenSixAxisState is an invalid size");
 

src/hid_core/resources/six_axis/six_axis.cpp

@@ -1,6 +1,3 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
-
 // SPDX-FileCopyrightText: Copyright 2023 yuzu Emulator Project
 // SPDX-License-Identifier: GPL-3.0-or-later
 
@@ -96,9 +93,9 @@ void SixAxis::OnUpdate(const Core::Timing::CoreTiming& core_timing) {
                     .accel = {0, 0, -1.0f},
                     .orientation =
                         {
-                            Common::Vec<f32, 3>{1.0f, 0, 0},
-                            Common::Vec<f32, 3>{0, 1.0f, 0},
-                            Common::Vec<f32, 3>{0, 0, 1.0f},
+                            Common::Vec3f{1.0f, 0, 0},
+                            Common::Vec3f{0, 1.0f, 0},
+                            Common::Vec3f{0, 0, 1.0f},
                         },
                     .attribute = {1},
                 };

src/input_common/drivers/mouse.cpp

@@ -88,8 +88,8 @@ void Mouse::UpdateStickInput() {
         last_mouse_change *= maximum_stick_range;
     }
 
-    SetAxis(identifier, mouse_axis_x, last_mouse_change[0]);
-    SetAxis(identifier, mouse_axis_y, -last_mouse_change[1]);
+    SetAxis(identifier, mouse_axis_x, last_mouse_change.x);
+    SetAxis(identifier, mouse_axis_y, -last_mouse_change.y);
 
     // Decay input over time
     const float clamped_length = (std::min)(1.0f, length);
@@ -104,20 +104,20 @@ void Mouse::UpdateMotionInput() {
     const float sensitivity =
         IsMousePanningEnabled() ? default_motion_panning_sensitivity : default_motion_sensitivity;
 
-    const float rotation_velocity = std::sqrt(last_motion_change[0] * last_motion_change[0] +
-                                              last_motion_change[1] * last_motion_change[1]);
+    const float rotation_velocity = std::sqrt(last_motion_change.x * last_motion_change.x +
+                                              last_motion_change.y * last_motion_change.y);
 
     // Clamp rotation speed
     if (rotation_velocity > maximum_rotation_speed / sensitivity) {
         const float multiplier = maximum_rotation_speed / rotation_velocity / sensitivity;
-        last_motion_change[0] = last_motion_change[0] * multiplier;
-        last_motion_change[1] = last_motion_change[1] * multiplier;
+        last_motion_change.x = last_motion_change.x * multiplier;
+        last_motion_change.y = last_motion_change.y * multiplier;
     }
 
     const BasicMotion motion_data{
-        .gyro_x = last_motion_change[0] * sensitivity,
-        .gyro_y = last_motion_change[1] * sensitivity,
-        .gyro_z = last_motion_change[2] * sensitivity,
+        .gyro_x = last_motion_change.x * sensitivity,
+        .gyro_y = last_motion_change.y * sensitivity,
+        .gyro_z = last_motion_change.z * sensitivity,
         .accel_x = 0,
         .accel_y = 0,
         .accel_z = 0,
@@ -125,46 +125,53 @@ void Mouse::UpdateMotionInput() {
     };
 
     if (IsMousePanningEnabled()) {
-        last_motion_change[0] = 0;
-        last_motion_change[1] = 0;
+        last_motion_change.x = 0;
+        last_motion_change.y = 0;
     }
-    last_motion_change[2] = 0;
+    last_motion_change.z = 0;
 
     SetMotion(motion_identifier, 0, motion_data);
 }
 
 void Mouse::Move(int x, int y, int center_x, int center_y) {
     if (IsMousePanningEnabled()) {
-        auto const mouse_change_int = Common::Vec<int, 2>(x, y) - Common::Vec<int, 2>(center_x, center_y);
-        auto const mouse_change = Common::Vec<float, 2>(float(mouse_change_int[0]), float(mouse_change_int[1]));
-        auto const x_sensitivity = Settings::values.mouse_panning_x_sensitivity.GetValue() * default_panning_sensitivity;
-        auto const y_sensitivity = Settings::values.mouse_panning_y_sensitivity.GetValue() * default_panning_sensitivity;
-        auto const deadzone_cw = Settings::values.mouse_panning_deadzone_counterweight.GetValue() * default_deadzone_counterweight;
-        last_motion_change += {-mouse_change[1] * x_sensitivity, -mouse_change[0] * y_sensitivity, 0};
-        last_mouse_change[0] += mouse_change[0] * x_sensitivity;
-        last_mouse_change[1] += mouse_change[1] * y_sensitivity;
-        // Bind the mouse change to [0 <= deadzone_cw <= 1.0]
+        const auto mouse_change =
+            (Common::MakeVec(x, y) - Common::MakeVec(center_x, center_y)).Cast<float>();
+        const float x_sensitivity =
+            Settings::values.mouse_panning_x_sensitivity.GetValue() * default_panning_sensitivity;
+        const float y_sensitivity =
+            Settings::values.mouse_panning_y_sensitivity.GetValue() * default_panning_sensitivity;
+        const float deadzone_counterweight =
+            Settings::values.mouse_panning_deadzone_counterweight.GetValue() *
+            default_deadzone_counterweight;
+
+        last_motion_change += {-mouse_change.y * x_sensitivity, -mouse_change.x * y_sensitivity, 0};
+        last_mouse_change.x += mouse_change.x * x_sensitivity;
+        last_mouse_change.y += mouse_change.y * y_sensitivity;
+
+        // Bind the mouse change to [0 <= deadzone_counterweight <= 1.0]
         const float length = last_mouse_change.Length();
-        if (length < deadzone_cw && length != 0.0f) {
+        if (length < deadzone_counterweight && length != 0.0f) {
             last_mouse_change /= length;
-            last_mouse_change *= deadzone_cw;
+            last_mouse_change *= deadzone_counterweight;
         }
+
         return;
     }
 
     if (button_pressed) {
-        const auto mouse_move = Common::Vec<int, 2>(x, y) - mouse_origin;
+        const auto mouse_move = Common::MakeVec<int>(x, y) - mouse_origin;
         const float x_sensitivity =
             Settings::values.mouse_panning_x_sensitivity.GetValue() * default_stick_sensitivity;
         const float y_sensitivity =
             Settings::values.mouse_panning_y_sensitivity.GetValue() * default_stick_sensitivity;
-        SetAxis(identifier, mouse_axis_x, float(mouse_move[0]) * x_sensitivity);
-        SetAxis(identifier, mouse_axis_y, float(-mouse_move[1]) * y_sensitivity);
+        SetAxis(identifier, mouse_axis_x, static_cast<float>(mouse_move.x) * x_sensitivity);
+        SetAxis(identifier, mouse_axis_y, static_cast<float>(-mouse_move.y) * y_sensitivity);
 
         last_motion_change = {
-            float(-mouse_move[1]) * x_sensitivity,
-            float(-mouse_move[0]) * y_sensitivity,
-            last_motion_change[2],
+            static_cast<float>(-mouse_move.y) * x_sensitivity,
+            static_cast<float>(-mouse_move.x) * y_sensitivity,
+            last_motion_change.z,
         };
     }
 }
@@ -213,18 +220,18 @@ void Mouse::ReleaseButton(MouseButton button) {
         SetAxis(identifier, mouse_axis_y, 0);
     }
 
-    last_motion_change[0] = 0;
-    last_motion_change[1] = 0;
+    last_motion_change.x = 0;
+    last_motion_change.y = 0;
 
     button_pressed = false;
 }
 
 void Mouse::MouseWheelChange(int x, int y) {
-    wheel_position[0] += x;
-    wheel_position[1] += y;
-    last_motion_change[2] += static_cast<f32>(y);
-    SetAxis(identifier, wheel_axis_x, static_cast<f32>(wheel_position[0]));
-    SetAxis(identifier, wheel_axis_y, static_cast<f32>(wheel_position[1]));
+    wheel_position.x += x;
+    wheel_position.y += y;
+    last_motion_change.z += static_cast<f32>(y);
+    SetAxis(identifier, wheel_axis_x, static_cast<f32>(wheel_position.x));
+    SetAxis(identifier, wheel_axis_y, static_cast<f32>(wheel_position.y));
 }
 
 void Mouse::ReleaseAllButtons() {

src/input_common/drivers/mouse.h

@@ -107,11 +107,11 @@ private:
 
     Common::Input::ButtonNames GetUIButtonName(const Common::ParamPackage& params) const;
 
-    Common::Vec<int, 2> mouse_origin;
-    Common::Vec<int, 2> last_mouse_position;
-    Common::Vec<float, 2> last_mouse_change;
-    Common::Vec<float, 3> last_motion_change;
-    Common::Vec<int, 2> wheel_position;
+    Common::Vec2<int> mouse_origin;
+    Common::Vec2<int> last_mouse_position;
+    Common::Vec2<float> last_mouse_change;
+    Common::Vec3<float> last_motion_change;
+    Common::Vec2<int> wheel_position;
     bool button_pressed = false;
 };
 

src/yuzu/configuration/configure_input_player_widget.cpp

@@ -2936,10 +2936,10 @@ void PlayerControlPreview::DrawArrow(QPainter& p, const QPointF center, const Di
 }
 
 // Draw motion functions
-void PlayerControlPreview::Draw3dCube(QPainter& p, QPointF center, const Common::Vec<f32, 3>& euler,
+void PlayerControlPreview::Draw3dCube(QPainter& p, QPointF center, const Common::Vec3f& euler,
                                       float size) {
-    std::array<Common::Vec<f32, 3>, 8> cube{
-        Common::Vec<f32, 3>{-0.7f, -1, -0.5f},
+    std::array<Common::Vec3f, 8> cube{
+        Common::Vec3f{-0.7f, -1, -0.5f},
         {-0.7f, 1, -0.5f},
         {0.7f, 1, -0.5f},
         {0.7f, -1, -0.5f},
@@ -2949,38 +2949,30 @@ void PlayerControlPreview::Draw3dCube(QPainter& p, QPointF center, const Common:
         {0.7f, -1, 0.5f},
     };
 
-    for (Common::Vec<f32, 3>& point : cube) {
-        float temp = point[1];
-        point[1] = std::cos(euler[0]) * point[1] - std::sin(euler[0]) * point[2];
-        point[2] = std::sin(euler[0]) * temp + std::cos(euler[0]) * point[2];
-        temp = point[0];
-        point[0] = std::cos(euler[1]) * point[0] + std::sin(euler[1]) * point[2];
-        point[2] = -std::sin(euler[1]) * temp + std::cos(euler[1]) * point[2];
-        temp = point[0];
-        point[0] = std::cos(euler[2]) * point[0] - std::sin(euler[2]) * point[1];
-        point[1] = std::sin(euler[2]) * temp + std::cos(euler[2]) * point[1];
+    for (Common::Vec3f& point : cube) {
+        point.RotateFromOrigin(euler.x, euler.y, euler.z);
         point *= size;
     }
 
     const std::array<QPointF, 4> front_face{
-        center + QPointF{cube[0][0], cube[0][1]},
-        center + QPointF{cube[1][0], cube[1][1]},
-        center + QPointF{cube[2][0], cube[2][1]},
-        center + QPointF{cube[3][0], cube[3][1]},
+        center + QPointF{cube[0].x, cube[0].y},
+        center + QPointF{cube[1].x, cube[1].y},
+        center + QPointF{cube[2].x, cube[2].y},
+        center + QPointF{cube[3].x, cube[3].y},
     };
     const std::array<QPointF, 4> back_face{
-        center + QPointF{cube[4][0], cube[4][1]},
-        center + QPointF{cube[5][0], cube[5][1]},
-        center + QPointF{cube[6][0], cube[6][1]},
-        center + QPointF{cube[7][0], cube[7][1]},
+        center + QPointF{cube[4].x, cube[4].y},
+        center + QPointF{cube[5].x, cube[5].y},
+        center + QPointF{cube[6].x, cube[6].y},
+        center + QPointF{cube[7].x, cube[7].y},
     };
 
     DrawPolygon(p, front_face);
     DrawPolygon(p, back_face);
-    p.drawLine(center + QPointF{cube[0][0], cube[0][1]}, center + QPointF{cube[4][0], cube[4][1]});
-    p.drawLine(center + QPointF{cube[1][0], cube[1][1]}, center + QPointF{cube[5][0], cube[5][1]});
-    p.drawLine(center + QPointF{cube[2][0], cube[2][1]}, center + QPointF{cube[6][0], cube[6][1]});
-    p.drawLine(center + QPointF{cube[3][0], cube[3][1]}, center + QPointF{cube[7][0], cube[7][1]});
+    p.drawLine(center + QPointF{cube[0].x, cube[0].y}, center + QPointF{cube[4].x, cube[4].y});
+    p.drawLine(center + QPointF{cube[1].x, cube[1].y}, center + QPointF{cube[5].x, cube[5].y});
+    p.drawLine(center + QPointF{cube[2].x, cube[2].y}, center + QPointF{cube[6].x, cube[6].y});
+    p.drawLine(center + QPointF{cube[3].x, cube[3].y}, center + QPointF{cube[7].x, cube[7].y});
 }
 
 template <size_t N>

src/yuzu/configuration/configure_input_player_widget.h

@@ -1,4 +1,4 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
+// SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
 // SPDX-License-Identifier: GPL-3.0-or-later
 
 // SPDX-FileCopyrightText: Copyright 2020 yuzu Emulator Project
@@ -198,7 +198,7 @@ private:
     void DrawArrow(QPainter& p, QPointF center, Direction direction, float size);
 
     // Draw motion functions
-    void Draw3dCube(QPainter& p, QPointF center, const Common::Vec<f32, 3>& euler, float size);
+    void Draw3dCube(QPainter& p, QPointF center, const Common::Vec3f& euler, float size);
 
     // Draw primitive types
     template <size_t N>